Drum Handling Equipment

54SPECIALS CAN BE MADE TO SUIT CUSTOMERS’ UNIQUE REQUIREMENTS

DTWHBBIndustrial & YardFor smooth surfaces.Wheels: 250mm SolidRubber-tyredCapacity: 320kg.

Drum Dollies

DTZ80Rough TerrainNegotiate gravel surfaces,floor grates etc.Wheels: 400mmpneumatic. 100mm nylonjockey. Capacity: 380kg.

MODEL SUITABLE FOR WHEELS CAPACITY

DTZ80 Rough Terrain Steel-cntrd 400mm pneum. 380kg

DTFBSR Industrial Steel-cntrd 250mm pneum. 320kg

DTWHBB Industrial & Yard Steel-cntrd 250mm solid rubber 320kg

DTBWBB Drum Cradle 400mm plastic-cntrd pneum. 320kg

Strong steel construction, Zinc Plated protection. Heavy sliding catch engagesover drum lip. Wheel choices (as pictured). 100mm nylon jockey wheels allowmaximum stability when drums are loaded or unloaded.

DTBWBBDrum Cradle

Chain secures drum.Fixed stand to lay

horizontally. Wheels:400mm pneumatic.

Capacity: 320kg.

Heavy-Duty Drum Trucks for 200/220L Drums

PLASTIC DRUM ATTACHMENT IS OPTIONAL ON ALL MODELS

DR64 TRIANGULAR

CASTORS: 75mm nyl. swivel

CAPACITY: 300kg

SIZE: 500m

DDSQ SQUARE

CASTORS: 75mm nyl. swivel

CAPACITY: 400kg

SIZE: 600mm x 600mm

DD66 SQUARE

CASTORS: 75mm nyl. swivel

CAPACITY: 400kg

SIZE 600mm x 600mm

HEIGHT: 125mm

DDSQSquareProvides full mobility of drumsthroughout the factory.

Heavy steel angle construction.

For 200L steel drums.

DR64 – TriangularHeavy steel flat bar construction.

For 200L steel drums.

Castors: 75mm nylon swivel.

Capacity: 300kg

DTCCombinationDrum TruckDesigned for handling low weightor low volume 60 or 200L steeldrums.

Strong steel construction with azinc-plated finish for full protection.

Sliding catch secures drum.

Also use as a General PurposeHand Truck.

Wheels: 300 x 4 pneumatic or

250mm solid rubber

Lip size: 380mmW x 230mmD

DTC/TPlastic Drum Tie-downA strong webbing and ratchet tie-down is available as an optionalextra for securing plastic drums tothe Drum-truck.

DTC DRUM TRUCK

HEIGHT: 1200mm

CAPACITY: 250kg

LIP SIZE: 250mm x 360mm

DR66 SquareGeneral purpose. Welded anglesteel with 18mm customwood deck.

See our

SpecialPurposeHand-trucks

on pages51–53

DTFBSRIndustrialUse on multi surfaces.Wheels: 250mm pneumatic.100mm nylon jockey.Capacity: 320kg.

DC1 – Drum CradleIdeal for 200L steel drums. Telescopic handleswith sliding catches which engage the drum lip.Rock back onto wheels to tilt drum horizontiallyto transport or decant (as pictured above).

DC1 DRUM CRADLE

SIZE: 930mm Long (handles in)Add 560mm with handles out500mmW x 510mmH

WHEELS: 100mm white nylon

Drum Handling Equipment

FOR DRUM PUMPS & TAPS SEE PAGE 58 – 59

Our Drum Handling Equipment is designed to provide safe and

efficient handling of very heavy and awkward drums of all types.

They’re constructed from quality steel and are very strong and

robust. Drum cradles are zinc-plated for long-life protection.

Drum Tipping Cradles

DC4 Drum CradleFor 200L steel drums or 220L plastic drums. Position flat-barlip under lower lip of drum and pull back to tilt horizontallyto transport or decant. Fit attachment DC4R (right) to freelyrotate drums (steel only) when resting horizontially.

DC4RDrum RevolvingAttachment

DC4 DRUM CRADLE

SIZE: 900mmL (including lip) 550mmW x 480mmH

WHEELS: 100mm white nylon

DC4R DRUM REVOLVING ATTACHMENT

SIZE: 590mmL x 480mmW

WHEELS: 75mm black nylon

55

Zinc-plated protection

Capacity: 250kgLength: 1120mm

DU Drum Upender

DWS Drum Webbing SlingFor 60L & 200/220L steel drums anda number of plastic drums.Ratchet secures drum

DL70 Drum LifterAttach to 200 litre drumsand use lifting hook.

DLS Drum Lifting SlingLift drums vertically, horizontally, or angled todischarge contents. Use with a forklift truck oroverhead hoist.

General Drum Handling

DLCDrum Lifting Clamp

ELEPHANT – Lift drums vertically,horizontally or invert and dump

contents. Self locking jaws. Use withoverhead hoist. Capacity: 1000kg

DT Drum TongsLift drums horizontally using overhead hoist.Semi-automatic.

DTUDrum Tilting Unit

Two models – standard (right) foruse with an overhead hoist, and

with forklift pockets (above).Drums rotate freely on axis.

Optional locking device available.Ratchet secures drum.

Drum Handling Equipment

56

Drum-lifting Trucks

M14Air Drive Motor

M02Mixing Blade

5-blade, Stainless Steel

M07Air Motor StandGalvanised

M16CouplerStainless Steel

Usual requirements200L DRUM – BUNG ENTRY (2”BSP).M02 Mixer M16 CouplerM07 Air Motor StandM14 Air Drive Motor (300 - 3000rpm)

60L DRUM – BUNG ENTRY (2”BSP).M19 Mixer M24 Coupler M07 Air Motor Stand

ELECTRIC DRILL OPERATIONVariable speed drill – 1/2” chuck or larger.M02 Mixer – 200L drums M19 Mixer – 60L drums

Drum Mixing Equipment• Specially designed for bung-hole entry-mixing

in 60 – 200 litre drums.

• Mixing Blades are lightweight and portablefor quick, efficient mixing.

• Simple set-up with only a few minutes’instruction.

• Mixers may be driven with a 1/2” electric drillor explosion-proof air drive motor (above).

• Thick or cold fluids may be thinned by heatingfor quicker mixing & dispensing.

DHB/T Drum Heater (200/220L steel drums only)For heating, melting and thawing non-volatile liquids, solids and viscous materialssuch as greases, fats, gelatine, tar and heavy oil. Heater is non-flameproof foroperation on 230 volt AC mains. Maximum 2000W with thermostat control(supplied without input lead). Standard temperature range 30º–110º, special 0º–40º.

HDT25BHydraulicDrum TruckSTRADDLE LEG

• Reliable hydraulic pump

• Claw grabs drum lip forlifting

• 2 large roller wheels witheasy steering rear brakedcastor

Lifting height: 345mm

Capacity: 250kg

MK80MobileDrum Carrier• Lift and tilt to decant

a full drum

• Tighten chain lever tosecure drum in collar

• 2 large roller wheelswith easy steeringrear castor

Capacity: 364kg

A = 1200mm

B = 1700mm

C = 1520mm

D = 970mm

E = 1320mm

DLR Drum Lifter/RotatorFREESTANDING. NYLON WHEELS

The Drum Lifter/Rotator enables one person to lift 250kg drums to aheight of 1.5 meters. Transort, rotate and decant unassisted.

The modified Pallet Truck hydraulics gives the operator finger-tip controlof light or heavy loads. Wheels are 200mm nylon, polyurethane or iron.

For a gearbox operated fork truck or overhead hoist mounted unitplease contact our sales engineers.

Manipulate Drum from the Forklift. Suitablefor standard steel 205 litre drums, alsoMauser L ring drums, and some plastic drums.

Capacity: 680kg.

Maximum fork section: 170mm x 50mm.

FLB150Forklift Drum Carrier

ADC 1Automatic Drum ClampDrum Grips

DG360A Single

FJCS25

WB-240

Automatic parrot beakgrip. Suitable forstandard steel 60/205litre drums, alsoMauser L-ring drums,CHH plastic drums andFibreboard drums.

Capacity: 360kg.Maximum fork section:135 x 50mm.

DG360B Double

Lift Drums easily and efficiently with a forklift truck.

Heavy welded steel construction.

Suitable for standardsteel 205L drums.Double Drum model(ADG 2) also available.

Maximm fork section: 180mm x 50mm.

Forklift Attachments

Drum Grips & Clamps – slip-on

Drum Handling Equipment

57

FDTUForklift Drum Tilter

Forklift pockets allow unit toeasily slide on to forks.

Drums rotate freely on axis.Optional locking device available.

Ratchet secures drum.

The FJCS25 Fixed Jib allows

for an additional lifting

height with the extension

beam being raised above

the fork pockets. The

attachment is held to the

forklift by safety chains.

The overall length when

retracted is 1.3 metres, and

when extended is 2 metres.

Zinc-plated finish

Fixed Jib Attachment – Short. 2.5 tonne

FJCS25 FIXED JIB ATTACHMENT

CAPACITY: 2500 Maximum

FORK POCKETS: 185mm x 65mm

UNIT WEIGHT: 100kg

With two models available, one for

240 litre and another for 660 litre

wheelie bins, the WB style tipper is

operated from the forklift drivers

seat by pull-cord. The bin is secured

in the bin cradle with safety chains.

• Enamel paint finish

• 500kg capacity

Wheelie Bin Tipper

SAFE WORKING LOAD (SWL) PER POSITION:

POSITON: 1 2 3 4

EXTENSION: 790 1200 1580 1960

SWL: 2500kg 1200kg 900kg 750kg

FORK LOAD UNITMODEL CAPACITY POCKETS CENTRES WEIGHT

WB-240: 500kg 165 x 65mm 1000mm 100kg

WB-660: 500kg 165 x 65mm 1700kg 140kg

NEWPRODUCT

NEWPRODUCT

TWO MODELS AVAILABLE

WB-660

NOTE:

WE SUPPLY ALARGER RANGE

OF FORKLIFTATTACHMENTS

ASK US!

Drum Handling Equipment

58

Hand Pumps SUITABLE FOR BOATS, CARAVANS, MOTOR HOMES ETC.

ClassicBrass Pump• 10 strokes per litre

UltraPantryPump

RockerGalley Pump• Fresh or salt water

• 13 strokes per litre

• Quality plasticpump

• Vertical plungeraction

• Cast-iron K model

• Suitable for clearand light fluids – water,petrol, diesel etc

Bung Spanner

DiaphragmHand Pump• Self-priming

Drum Pumps

A variety of pump options designed for use with 2 inch outlets on 205 & 60Lstandard steel drums.

IMPORTANT: Advise specific chemical applications to ensure correct usage.Always wear protective clothing and eye protection when dispensing chemicals.Don’t mix applications; ie. one pump per fluid type.

DHS 450mmFor removing bungs fromsteel or plastic drums. Fitsmost types of drum closure.

TQ14 Rotary pumpCast alloy body with steel inlet/outlettubing and heavy-duty handle.Delivers up to18 litres per minute.

Transfer fluids in both directions.Ideal for transferring petrol, diesel

fuels, heavy oil, machine oil, lowviscosity oils and non-corrosive

liquids. Includes 2.2m farm tankgrade anti-static hose.

TQ01 Lever pumpGeneral purpose, steel constructionwith three alternative ‘O’ rings and

chemical compatibility chart.Telescopic suction tube. Comes with

1.8m outlet hose (petrol resistant).Suitable for a wide variety of

chemicals and solvents. Convenientbung opener cast on pump head.

Pumps approx. 250ml per stroke, andhandles liquids to SAE90.

SigmaDouble-actionPump

TQ05 Siphon pumpPolyethylene construction.Siphons liquids from higher tolower levels. Pumping thebellows primes the pump andbegins siphon action. Simplyloosen vent cap to stop thesiphon flow. Pump bellows todispense fluids to a higher level.Siphons up to 20 litres perminute, handles light oils,kerosene and various types oflight solvents.

Drum Handling Equipment

TP01 PolyethyleneFlo-king. lever action 2” NPS

KEY: BSP – British Standard Pipe Thread.

NPS – US National Pipe (straight) Thread.

HDPE – High Density Polyethylene.

LLDPE – Linear Low Density Polyethylene.

TP08 PolyethyleneLLDPE – Lever action. 3/4” BSP

TP14 PolyethyleneHDPE – Front lever action. 3/4” BSP

TP09 PolyethyleneHDPE – Screw action. 3/4” BSP

TP03 PolyethyleneHDPE – drum-major.Vertical discharge 2” BSP

TP03AHDPE – drum-major.Straight through 2” BSP

Cutter adapter available to broachdrum bung liner.

TP04 Ball valveNickel plated, brass body,chrome plated ball, Teflonseals. Male/Female, 3/4” BSP

TP18 Brass SPRING

LOADED.Self-closing, Teflon seal.Fire baffle 3/4” BSP

Special Purpose Taps

TP15/58 PolyethyleneLLDPE. Aeroflow with 58mm capfor Plastic Industry and Rheemcontainers.

TP15/70LLDPE. Aeroflow with 70mm capfor Carter Holt Harvey containers.

TP22 StainlessBall Valve (316)3 Piece. Teflon seal F-F 2” BSP.Serviceable in-situ

TP21 – 2 Piece. Teflon seal

F-F 2” BSP. Seal serviceable

TP20 – 1 Piece. Teflon sealF-F 2” BSP. (1” through body).Non-serviceable

TP22 with optionalnipple and elbow

3/4” Drum Taps

2” Drum Taps

Drum Adaptors – Polyethylene (HDPE) Bung Reducers – (HDPE)

TPB01 2” BSP external / 3/4” BSP internal

TPB02 2” Mauser external / 3/4” BSP internal

TPB03 2” Van Leer external / 3/4” BSP internal

TPB04 2” Rieke external / 3/4” BSP internal

TPA03 TPA01TPA06 TPA02TPA04

TPB01 TPB02 TPB03 TPB04

TP02Treacle TapMolasses GateGunmetal, 2” BSP

TP02STreacle TapMolasses Gate

Brass, spring loaded,Teflon seal, 2” BSP

TPA01 2” Mauser external / 2” BSP internal short

TPA04 2” Mauser external / 2” BSP internal long

TPA02 2” Rieke external / 2” BSP internal

TPA03 2” Van Leer external / 2” BSP internal

TPA06 NW50 internal / 2” BSP internal

59

Drum Handling Equipment

60

SL 1 Spill Bin

SBP 4Plastic Spill PalletHolds up to four 220L drums. Drip andspill containment unit integrated with IBCbund. OHS safe for operators.

Drum Spill Containment Bins

Offering complete protection against damaging and costly

chemical spills, Spill Containment Bins are available for one,

two and four 205 litre drums. Close spacing support bars

allow for large or small drums up to 2000kg to be placed

on the spill bin. All models have a spill capacity of at least

110% containment of the largtest drum in accordance with

Australian Standards, being classified as ‘portable’ units,

and have zinc-plated finish.

These drum racking options provide a cleaner

environment and a safer working area by

protecting against costly and dangerous spills.

The racking system consists of the bolt together

drum rack, and the spill containment tray which it

stands over. In the event of a spill, the tray can be

easily removed without disturbing the drum rack.

Each spill tray is fitted with a removable plug for

emptying.

Drum racking systems are fully zinc-plated

No. OF DIMENSIONS SPILL UNITMODEL DRUMS W x D x H CAPACITY WEIGHT

SL 1 1 810 x 760 x 490mm 240 litres 55kg

SL 2 2 1210 x 610 x 440mm 250 litres 60kg

SL 4 4 1210 x 1210 x 265mm 245 litres 70kg

SBP 4 4 1400 x 1400 x 270mm 245 litres 00kg

NEWPRODUCTS

SL 4 Spill Bin

SL 2 Spill Bin

Drum Racking System

A NUMBER OF DRUM RACKINGOPTIONS ARE AVAILABLE

RS2-2L

RS3-3LRS3L

RS2L

RS2L DRUM RACKING SYSTEM

WIDTH DEPTH HEIGHT

RACK: 1330mm 600mm 831mm

TRAY: 1210mm 1210mm 265mm

Stand alone Drum Rack bolts together. Tray sitsbelow and is forkliftable without disturbing the rack.

FOR DRUM TAPS SEE PAGE 58 – 59