FEATURES
Intelligent EtherCAT® PCI Express Master Board
AdEXP1572
• ARM® Cortex®-A9 Dual-Core (Xilinx® Zynq®-7010)
• EtherCAT® Master ClassA Support
• EtherCAT® Feature Pack Support Secure Cable Redundancy / Hot Connect Capability
• Fast Ethernet 2 Ports
• PCI Express Add-in Card
• Operating Temperature: 0℃ 〜 55℃
• RoHS Compliant
• OS: Wind River® VxWorks® 6.9.x Microsoft® Windows® 7, 10
• Available in General Purpose Computer Base with PCI Express
• Available to Install to Space-Saving with Low Profile Compatible
AdEXP1572 is a PCI Express board which has the EtherCAT® master communication function.
CPU works as an intelligent PCI Express bus slave board with Xilinx Zynq® ARM® Cortex®-A9.
As EtherCAT® master protocol stack, “EC Master” with ClassA compatible of acontis technologies is installed. Secure cable redundancy and hot connect capability are supported by EtherCAT® feature pack.
AdEXP1572 is controlled by PCI Express bus mas-ter (host CPU). The data is transferred through the shared memory which is installed in AdEXP1572.
With working as an intelligent slave, AdEXP1572 re-alizes EtherCAT® master communication minimizing the impact for the host CPU.
Main Specification
Block Diagram
Intelligent EtherCAT® PCI Express Master BoardAdEXP1572Specifications
C203R4-1705-EN
Headquarter 616-4, Tanaka, Kita-ku, Okayama 700-0951 JAPAN TEL 086-245-2861 FAX 086-245-2860Factory 134-1, Yonegura, Minami-ku, Okayama 700-0954 JAPAN TEL 086-243-2340 FAX 086-243-8351Tokyo Branch KDX Kaji-cho Bldg. 4F, 5-2, 3-chome, TEL 03-5294-1731 FAX 03-5294-1734 Kanda Kaji-cho, Chiyoda-ku, Tokyo 101-0045 JAPAN※All other brand and product names appearing in this document are registered trademarks or trademarks of their respective holders.
Contact: [email protected]*Specifications are subject to change without notice.
CPU Processor ARM®Cortex®-A9DualCore(Xilinx®Zynq®-7010) OperatingFrequency 666MHz
Memory MainMemory DDR3SDRAM256MB BootROM1 SPI-FLASH16MB BootROM2 microSD(Spare) SharedMemory 256kB(Zynq®PLBuilt-in)
EtherCAT® Classification ClassACompatible FeaturePack SecureCableRedundancy/HotConnectCapability PeriodicUpdate Configurableat100us〜10ms
FrontI/O EtherCAT® 2Ports,100BASE-TX,RJ45Connector(PHY:TITLK106) *ThisboardcannotbeusedasEtherCAT®communicationportbecauseitisdedicatedEtherCAT®. LED EtherCAT®LINK/LEDforACTlampx2 EtherCAT®StausLamp2ColorsLEDx2
On-BoardI/O JTAG 1PortforDebug UART 1PortforDebug
BusInterface Standard PCIExpressBaseSpecificationRevision1.0a PCIExpressCardElectromechanicalSpecificationRevision1.1 LinkWidth X1lane(2.5Gbps/lane) PCIe-PCIBridge PERICOMPI7C9X110BNBE
Power SupplyVoltage DC12V±8% DC3.3V±9%(PowerFeedingfromPCIExpressBus) ConsumptionCurrent DC12V,0.23A(Typ),0.35A(Max) DC3.3V,0.27A(Typ),1A(Max)
MechanicalSpec. Dimension 68.75mmx167.50mm(LowProfile/StandardHeight) Weight 70g
OperatingEnv. OperatingTemp.Range 0℃〜55℃ OperatingHum.Range 35%〜80%RH(Non-condensing) Non-OperatingTemp.Range -10℃〜70℃ Non-OperatingHum.Range Notgreaterthan90%RH(Non-condensing) RoHS Compliant
DeviceDriver OS WindRiver®VxWorks®6.9.x,Microsoft®Windows®7,10
PCIe-PCIbridge
PERICOMPI7C9X110
DDR3SDRAM256MB
DebugConnector
PHYTI
TLK106
MII PULSETRANS
RJ45Connector
JTAG16
XilinxZYNQ7010
PHYTI
TLK106
MII PULSETRANS
RJ45Connector
DebugConnector
UART
SPISD
microSD8GB
FLASH16MB
PCI32bit
33MHz
Clock Generator
Power Generator
PCIeCardedge
x1
PCIex1