DSE7450DC GENERATOR CONTROLLER
DSEGenset
®
The DSE 7450 is a control moduledesigned to control DC generatorsin supplying both a load and/or thecharging of batteries in a remotestandalone application.
Specific attention has been given toensure this module has thenecessary features to beconfigured for many different andchallenging applications. Owing tothe large number of monitoringpoints and the built inprogrammable logic controller, awide number of operating modescan be realised. This provides theuser with the ultimate flexibility inthe engine control of the generatorto ensure battery life optimisation,reduce engine maintenance/replacement and fuel usage.
Application specific needs can alsobe achieved by combining thestandard and embedded safetyfeatures for generator control andthe configurable discrete I/O.
The DSE7450 will annunciatewarnings, shutdown and enginestatus information on the back-litLCD screen, illuminated LEDs,remote PC, audible alarm and viaSMS text alerts. Parameters can beadjusted using the LCD and tactilerubber silicon 5 key menunavigation. PIN code protectionensures that only authorisedpersons can access these features.
The module includes USB, RS232,RS485 & Ethernet ports as well asdedicated terminals for systemexpansion.
The DSE7450 Series modules arecompatible with both electronic(CAN) and non-electronic enginesand offer a comprehensive numberof flexible inputs, outputs andextensive engine protections. Thismeans the system can be easilyadapted to meet the mostdemanding industry requirements.The modules can be easilyconfigured using the DSEConfiguration Suite Software.
FEATURES
ENVIRONMENTAL TESTING STANDARDS
ELECTRO-MAGNETIC COMPATIBILITYBS EN 61000-6-2EMC Generic Immunity Standard for the Industrial EnvironmentBS EN 61000-6-4EMC Generic Emission Standard for the Industrial Environment
ELECTRICAL SAFETYBS EN 60950Safety of Information Technology Equipment, including Electrical Business Equipment
TEMPERATUREBS EN 60068-2-1Ab/Ae Cold Test -30 oCBS EN 60068-2-2Bb/Be Dry Heat +70 oC
VIBRATIONBS EN 60068-2-6Ten sweeps in each of three major axes5 Hz to 8 Hz @ +/-7.5 mm, 8 Hz to 500 Hz @ 2 gn
HUMIDITYBS EN 60068-2-30Db Damp Heat Cyclic 20/55 oC@ 95% RH 48 HoursBS EN 60068-2-78Cab Damp Heat Static 40 oC@ 93% RH 48 Hours
SHOCKBS EN 60068-2-27Three shocks in each of three major axes15 gn in 11 mS
DEGREES OF PROTECTIONPROVIDED BY ENCLOSURESBS EN 60529IP65 - Front of module when installed into thecontrol panel with the supplied sealing gasket.
PENDING
1ph2ph3phN
1ph2ph3phN
11
10
232
6 4
MODEM
ISSUE 1
RS232 ANDRS485
CONFIGURABLEINPUTS
DC OUTPUTS ANALOGUESENDERS
EMERGENCY STOP
DC POWER SUPPLY 8-35V
DEUTZISUZUPERKINSCATERPILLARMTUVOLVOCUMMINSSCANIA
+D +W/L
GENERATORSENSING
VOLTS
VOLTS
VOLTS
ELECTRONICENGINES &MAGNETIC PICK-UP
FUEL & CRANKOUTPUTSFLEXIBLE WITH CAN
CHARGEALTERNATOR
N/C VOLTFREE OUTPUT
MAINS (UTILITY)SENSING
N/O VOLTFREE OUTPUT
+
COMPREHENSIVE FEATURE LIST TO SUIT A WIDE VARIETY OFGEN-SET APPLICATIONS
7
OTHER
DSE7450
DSE2130DSE2131DSE2133DSE2152DSE2157DSE2548 485
MODBUS
USBPORT
USBHOST
ETHERNET
PC
DSENETEXPANSION
CURRENT SENSING
CHARGE SHUNT LOAD SHUNT
DEEP SEA ELECTRONICS PLC UKHighfield House, Hunmanby Industrial Estate, Hunmanby YO14 0PHTELEPHONE +44 (0) 1723 890099 FACSIMILE +44 (0) 1723 893303EMAIL [email protected] WEBSITE www.deepseaplc.com
DEEP SEA ELECTRONICS INC USA3230 Williams Avenue, Rockford, IL 61101-2668 USATELEPHONE +1 (815) 316 8706 FACSIMILE +1 (815) 316 8708EMAIL [email protected] WEBSITE www.deepseausa.com
055-142/09/12 (1)
KEY FEATURES• Configurable inputs (10)• Configurable outputs (8)• Configurable maintenance alarms(3)
• Configurable batterymaintenance alarms (3)
• Configurable alarms and timers• Automatic or Manual start withconfigurable start and stop timers
• 2 DC shunt inputs (Configurable0-250mV and 0-5000 A)
• AC & DC voltage measurement • Mains (utility) failure detection• Dedicated load test button• kW overload alarms• Comprehensive electricalprotection
• USB, RS232, RS485, Ethernetand Modbus RTU/TCPcommunication
• PLC functionality using programeditor within PC configurationsuite
• Multi event exercise timer• Back-lit LCD 4-line text displaywith multiple languages possible
• Audible alarm• Fixed and user defined LEDindicators
• Real time clock and log (250events).
• Fault condition notification todesignated PC
• Engine Protection• Five key menu navigation for LCDdisplay (PIN protected)
• Engine speed detection via CAN,magnetic pick-up or alternatorsensing
• Fuel usage monitor and low levelalarms
• Charge alternator failure alarm• Manual fuel pump control• ‘Protections disabled’ function• Manual/Automatic load transfer• Fully configurable & remoteSCADA monitoring via DSEConfiguration Suite PC Software
• Start & stop capability &advanced SMS messaging(additional modem required)
• Additional display screens to helpwith modem diagnostics
• DSENet® expansion• Battery & Load monitoring• DC alarms for overcurrent &short circuit
• Battery temperature monitor• Battery charge remaining display• Battery depth of dischargedisplay
KEY BENEFITS• Programmable characteristics toinfluence charging operation andextend battery life
• Optimise generator running timeto reduce fuel usage, reducemaintenance and extend engineand battery lifetime
• Automatic start/stop according tobattery condition.
• Engine start/stop can be adjustedto maintain desired battery chargelevel
• DSENet® connection for systemexpansion modules
• Ability to implement applicationspecific logic and customiseoperation.
• Use of two industry standard DCshunt resistors allow themonitoring of load current andbattery charging current
• This automatically summarisesthe total for complete visibility ofthe system (flexible locations ofthe shunts are possible)
RELATED MATERIALSTITLE PART NO’SDSE7450 Installation Instructions 053-143DSE7450 Operator Manual 057-170DSE7450 PC Configuration Suite Manual 057-169
SPECIFICATION
DC SUPPLYCONTINUOUS VOLTAGE RATING8 V to 35 V Continuous
CRANKING DROPOUTSAble to survive 0 V for 50 mS, providing supply was at least 10 V before dropoutand supply recovers to 5 V. This is achieved without the need for internal batteries
MAXIMUM OPERATING CURRENT260 mA at 12 V, 130 mA at 24 V
MAXIMUM STANDBY CURRENT120 mA at 12 V, 65 mA at 24 V
CHARGE FAIL/EXCITATION RANGE0 V to 35 V
OUTPUTSOUTPUT A (FUEL)15 A DC at supply voltage
OUTPUT B (START)15 A DC at supply voltage
OUTPUTS C & D8 A AC at 250 V AC (Volt free)
AUXILIARY OUTPUTS E,F,G,H,I & J2 A DC at supply voltage
GENERATOR VOLTAGE RANGE 15 V to 150 V AC (L-N)
FREQUENCY RANGE3.5 Hz to 75 Hz
MAINS (UTILITY)VOLTAGE RANGE 15 V to 333 V AC (L-N)
FREQUENCY RANGE3.5 Hz to 75 Hz
MAGNETIC PICK UPVOLTAGE RANGE+/- 0.5 V to 70 V
FREQUENCY RANGE10,000 Hz (max)
DIMENSIONSOVERALL240 mm x 172 mm x 57 mm 9.4” x 6.8” x 2.2”
PANEL CUTOUT 220 mm x 160 mm 8.7” x 6.3”
MAXIMUM PANEL THICKNESS8 mm0.3”
STORAGE TEMPERATURE RANGE-40 oC to +85 oC
DSE7450DC GENERATOR CONTROLLER
®
DSEGenset
FEATURES
Registered in England & Wales No.01319649VAT No.316923457
Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to changethe details shown on this data sheet without prior notice. The contents are intended for guidance only.