219

STATEMENT A-1BASIC RATES OF MATERIALS FOR 2012-13

SR. NO.

DESCRIPTION UNITRATE IN RS. FOR 2,012-13

1 2 3 4.00

1 Cement M.T. 6,400.00

2 H.Y.Steel M.T. 50,350.00

3 Mild Steel M.T. 49,000.00

4 Structural Steel M.T. 51,000.00

5 Tubular Steel M.T. 56,000.00

6 TMT FE - 500 M.T. 51,600.00

7 High Tensile Steel ( for prestressed) M.T. 79,500.00

8 Bitumen VG 10 (Bulk) (80/100) M.T. 47,142.00

9 Bitumen VG 30 (Bulk) (60/70) M.T. 48,172.00

10 Bitumen VG 40 (Bulk) (30/40) M.T. 51,545.00

11 Bitumen VG 30 (Packed) (60/70) M.T. 52,162.00

12 Bitumen VG 10 (Packed) (80/100) M.T. 51,132.00

13 Bitumen VG 40 (Packed) (30/40) M.T. 55,535.00

14 Sand - Natural Cu.Mt. 650.00

15 Sand - Crushed Cu.Mt. 600.00

16 Bricks II Class 1,000 Nos. 5,250.00

17 Fly Ash Brick size 230*100*80 mm 1,000 Nos. 6,600.00

18 Fly Ash Brick size 230*150*80 mm 1,000 Nos. 8,000.00

19 Rubble stone Blasted Cu.Mt. 260.00

20 Aggregate 60 mm Blasted (Hand Broken) Cu.Mt. 300.00

21 Aggregate 40 mm (Hand Broken) Blasted. Cu.Mt. 310.00

22 Aggregate above 25 mm and upto 40mm Crushed40 mm (Hand Broken) Blasted.

Cu.Mt. 460.00

23 Aggregate 25 mm Cu.Mt. 500.00

24 Aggregate 20 mm Cu.Mt. 510.00

220

25 Aggregate 12 mm Cu.Mt. 510.00

26 Aggregate 10 mm Cu.Mt. 510.00

27 Aggregate 6 mm Cu.Mt. 510.00

28 Stone Dust Cu.Mt. 375.00

29 Soft Murum Cu.Mt. 130.00

30 Hard Murum Cu.Mt. 135.00

31 Rubber Modified Bitumen(Bulk)CR-60 at Mumbai M.T. 47,876.00

32 Rubber Modified Bitumen(Bulk)CR-55 at Mumbai M.T. 47,953.00

33 Rubber Modified Bitumen(Bulk)CR-50 at Mumbai M.T. 47,786.00

34 Stone Boulder of size 150mm and below at Cruser Plant Cu.Mt. 260.00

35 Bitumen (Cationic Emulsion) M.T. 45,832.00

36 Bitumen (emulsion) M.T. 44,832.00

37 Joint Sealant compound Kg. 105.00

38 Unstaked lime M.T. 6,000.00

39 Water 1,000 Litre 125.00

40 White Cement M.T. 25,000.00

41 Plastizer Litre 103.00

42 Stainless Steel Plate Kg. 300.00

Bd-A: EXCAVATION

1 Blasting Powder Kg. 78.00

2 Detonator No. 11.00

3 Fuse No. 11.00

4 Nipple For Fastening Detenator No. 30.00

5 Noble Dynamite Kg. 78.00

6 Red Tape Safety Fuse R.Mt. 7.00

Bd-C: STRUCTURAL STEEL WORK

1 M.S.screws etc. 35mm dia. and 75mm long (100nos.) Per Box 80.00

2 Nut Bolts 16mm dia./Nails all size Kg. 60.00

221

3 Nut Bolts washers 12mm dia. 45mm long No. 8.35

4 Nut Bolts washers 12mm dia. 75mm long No. 11.00

5 M.S. Locking Arrangement for gate No. 600.00

Bd- F: REINFORCEMENT CEMENT CONCRETE

1 Binding Wire Kg. 60.00

2 Centering Oil Litre 7.70

3 Plastic Cover Block No. 1.90

4 R.C.C.Jali 50mm thick Sq.Mt. 465.00

Bd- G: REINFORCEMENT CEMENT CONCRETE

1 Fire Bricks (Red) No. 20.00

Bd- H: STONE MASONRY

1 Corner stone 38*20*30cm No. 54.00

2 Corner / Quions 30*20*30cm No. 304.00

3 Face Stone / Trap Rubble Cu.Mt. 94.00

4 Khandakies No. 40.00

5 Pin Header (Standard Size) No. 27.60

6 Quarry Spall, laterite upto 5kg (0.3*0.3*0.3) No. 63.00

7 Quarry Spall (Trap Rubble) No. 63.00

8 Through Stone Ordinary No. 25.00

Bd- I: CEMENT CONCRETE STONE MASONRY

1 Hollow Blocks C.C.0.2*0.2*0.4M No. 25.00

2 Hollow Blocks C.C.0.1*0.2*0.4M No. 20.00

3 Hollow Block C C 0.30 x 0.20 x 0.15 No. 27.00

Bd- J: WATER PROOFING

1 Bitumen (Compound) Kg. 37.00

2 Brick bats Cu.Mt. 200.00

3 Bitumen Felt (I.S.1,322-1,970) 20 Mtr. long R.Mt. 910.00

4 Polymerised Water proof Compound Litre 94.00

222

5 Tar Paper Sq.Mt. 39.00

6 Water proof compound I.S Kg. 39.00

7 Tar Felt B.H.I.S.I.3mm thick Sq.Mt. 69.00

8 Acrylic Polymer Modified waterproofing Powder Kg. 110.00

9 Acrylic Polymer Modified Liquid Litre 130.00

10 Fibre Glass Mesh Sq.Mt. 40.00

Bd- K: EXPANSION JOINTS

1 Polydee-TP40 Primer Kg. 400.00

2 Polydee-TP40 Primer. Kg. 400.00

3 Polydee-TP42 Primer Litre 150.00

4 Polydee-LM Kg. 420.00

5 Polydee-LM 150mm width R.Mt. 450.00

6 Bituflex Cloesdcell foam 30x30 mm R.Mt. 45.00

7 AG 10 Granules Kg. 13.00

8 Polydee-41 sealant and polyseal Kg. 750.00

9 Polydee-MC Kg. 280.00

10 Polydee-11 Kg. 980.00

Bd- L: PLASTERING AND POINTING

1 Neeru / Sanala Kg. 5.00

2 Texture Material bags 840.00

Bd- M: PAVING, FLOORING, AND DADO

1 Rough Shahabad 25 to 30mm thick Sq.Mt. 190.00

2 Rough Shahabad 40 to 45 mm thick Sq.Mt. 220.00

3 Polished Shahabad 25 to 30mm thick Sq.Mt. 230.00

4 Rough Shahabad 50 to 60mm thick Sq.Mt. 250.00

5 Polished Shahabad 40 to 50mm thick For step Sq.Mt. 350.00

6 Polished Shahabad Machine cut 25mm thick Sq.Mt. 240.00

7 Polished Shahabad for step 25mm thick Sq.Mt. 250.00

223

8 Tandoor Polished 25mm thick (Machine cut) Sq.Mt. 310.00

9 Tandoor Polished 25mm thick (Hand Cut) Sq.Mt. 260.00

10 Tandoor Polished for steps 25mm thisk Sq.Mt. 320.00

11 Black Kadappa (one side polish) (Machine cut) 25mm thick Sq.Mt. 335.00

12 Black Kadappa (one side polish) (Machine cut) 35mm thick Sq.Mt. 365.00

13 Both Sides Polished Kadappa stone 25mm thick Sq.Mt. 415.00

14 Kota stone (Machine cut) upto 25-30mm thick one side polished Sq.Mt. 405.00

15 Kota stone (Hand cut) upto 25-30mm thick one side polished Sq.Mt. 365.00

16 Kota stone for step polished) upto 25mm thick (1.2*0.3M) Sq.Mt. 460.00

17 White glazed tiles 20*10cm Sq.Mt. 315.00

18 Colour glazed tiles 20*20cm Sq.Mt. 310.00

19 Ceramic tiles 20*20cm Sq.Mt. 285.00

20 Ceramic tiles 30*30cm Sq.Mt. 310.00

21 Ceramil tiles 395*395*7mm Sq.Mt. 347.00

22 Ceramic Antiskid Flooring Tiles 30 x 30 cm Sq.Mt. 300.00

23 Ceramic Tiles for dado 30 x 30 cm Sq.Mt. 310.00

24 Ceramic Tiles for dado 30 x 45 cm Sq.Mt. 440.00

25 Ceramic Tiles for dado 30 x 60 cm Sq.Mt. 515.00

26 Heavy duty interlocking concrete block

i) 60mm thick gray 300 kg/sq.cm. Sq.Mt. 340.00

ii) 60mm thick coloured 300kg/sq.cm Sq.Mt. 375.00

iii) 60mm thick rubber mould glossy 400kg/sq.cm Sq.Mt. 550.00

iv) 80mm thick gray 300kg/sq.cm Sq.Mt. 415.00

v) 80mm thick coloured 300kg/sq.cm Sq.Mt. 440.00

vi) 80mm thick rubber mould glossy 400kg/sq.cm Sq.Mt. 600.00

vii) 40mm thick gray 200kg/sq.cm Sq.Mt. 255.00

27 40mm thick colour 200 kg/sq.cm Sq.Mt. 275.00

28 Telephone black granite Sq.Mt. 2,394.00

224

29 Green marble Sq.Mt. 753.00

30 Vitrified tiles Glossy Size 590 to 605mm* 590 to 605mm*8 to 10mm

Sq.Mt. 540.00

31 Vitrified matt finish - size 590 to 605mm* 590 to 605mm* 8 to 10mm

Sq.Mt. 750.00

32 Vitrified rustic matt stone finish size 590 to 605mm *590 to 605mm*8 to 10mm

Sq.Mt. 970.00

33 Vertified stone effect finish size 590 to 605mm* 590 to 605mm * 8 to 10mm

Sq.Mt. 1,250.00

34 Calcet Powder Kg. 36.00

35 Black Oxide powder Kg. 95.00

36 Fevi Matt Chemical 10 Kg Bag bags 560.00

37 Marble chips Kg. 36.50

38 Tremix Treatment 100 mm thick Sq.Mt. 85.00

Bd - N: WOOD FINISH

1 Bees wax Kg. 100.00

2 Coal Tar Kg. 20.00

3 Common Spirit Litre 65.00

4 French Polish Litre 104.00

5 Varnish Litre 100.00

6 Malemaine Polish Litre 600.00

Bd - O: OIL PAINTING

1 Oil enamel paint/flat/glossy paint(ready mix) (with I.S.I. Mark) Litre 217.00

2 Synthetic paint (ready mix) Litre 187.00

3 Catonic emulsion paint Kg. 265.00

4 White oil paint 100ml pack tin No. 25.00

5 Red Oxide paint Kg. 93.00

6 Cement paint Kg. 68.00

7 Steel Primer Litre 102.00

8 Primer for plaster surface Litre 94.00

225

9 Putty Kg. 43.00

10 Boiled linseed oil Litre 68.00

11 Linseed oil double boiled Litre 76.00

12 Terpentine Litre 49.00

13 Wood Primer Litre 93.00

14 Brush for lettring No. 27.00

15 Brush for road marking 5cm No. 78.00

16 Brush for marking road 8cm No. 155.00

17 Brush for road marking 10cm No. 185.00

18 Lustre paint Litre 204.50

19 Textured Synthetic paint Litre 195.00

20 White lead paint Kg. 250.00

Bd - P: COLOUR , WHITE WASHING , DISTEMPERING

1 Neel Kg. 106.00

2 Oil bound distemper Kg. 91.00

3 Red powder / Geru Kg. 10.00

4 Saras Kg. 46.00

5 Scrapping sand paper size (30 * 20cm) No. 10.00

6 Dry distemper Kg. 60.00

Bd - Q: WOOD WORK

1 Ghana teak wood Cu.Mt. 70,600.00

2 Teak wood planks above 2.5m length Cu.Mt. 70,600.00

3 Teak wood battens 50*25mm R.Mt. 56.00

4 Teak wood bidding 1/2"*1/2" R.Mt. 29.00

5 Teak wood batten 25 mm * 12 mm R.Mt. 38.00

6 Jungle wood (non teak) normal Cu.Mt. 27,000.00

7 Jungle wood (non teak) Hard Cu.Mt. 27,500.00

8 Bamboo 25mm dia.(4.5 to 6m) R.Mt. 8.50

226

9 Bamboo 50mm dia. R.Mt. 11.00

10 Bamboo Matting 1.2*1.8m Sq.Mt. 44.00

11 Commercial ply - wood 4mm thick Sq.Mt. 190.00

12 DECORATIVE Ply -veneer (1.20*2.40mm) Sq.Mt. 322.00

13 Ply wood 12mm thick Sq.Mt. 420.00

14 Ply wood 9mm thick Sq.Mt. 339.00

15 Ply wood 6mm thick Sq.Mt. 316.00

16 Mica Laminate as per I.S.I.0.8MM thick Sq.Mt. 287.00

17 Mica Laminate as per I.S.I.0.1MM thick Sq.Mt. 257.00

18 Formica 1.5mm thick Sq.Mt. 449.00

19 Face Vener Board 4mm thick Sq.Mt. 630.00

20 Hard Board 6mm thick Sq.Mt. 184.00

21 Laminated board single 6mm thick Sq.Mt. 305.00

22 Laminated boare single10mm thick Sq.Mt. 322.00

23 Laminated board single 12mm thick Sq.Mt. 362.00

24 Laminated board single 20mm thick Sq.Mt. 374.00

25 Laminated board double 6mm thick Sq.Mt. 374.00

26 Laminated board double 10mm thick Sq.Mt. 390.00

27 Laminated board double 12mm thick Sq.Mt. 390.00

28 Laminated board double 20mm thick Sq.Mt. 402.00

29 Partical board B.W.P.Phinol bond 12mm thick Sq.Mt. 350.00

30 Partical board B.W.P.Phinol bond 19mm thick Sq.Mt. 443.00

31 Partical board B.W.P.Phinol bond 25mm thick Sq.Mt. 518.00

32 Partical board B.W.P.Phinol bond 35mm thick Sq.Mt. 600.00

33 Fevicol / Vamicol Kg. 160.00

34 P.V.C.Hand rail 40mm dia. R.Mt. 85.00

35 P.V.C.Hand rail 40mm dia. Sq.Mt. 100.00

36 Rawal Plug Per Box 25.00

227

37 Solid core shutter 35mm thick with commercial veneer facing and phenol bonded

Sq.Mt. 970.00

38 Wooden peg No. 4.70

39 M.D.F.board baggasse based interior grade plain ( I.S.12,406 - 2,000 ) 9mm thick

Sq.Mt. 310.00

40 M.D.F.board baggasse based interior grade plain ( I.S.12,406 - 2,000 ) 12mm thick

Sq.Mt. 365.00

41 M.D.F.board baggasse based interior grade plain ( I.S.12,406 - 2,000 ) 18mm thick

Sq.Mt. 560.00

42 Bagasse based plain partical board's interior grade ( I.S. 3,087 - 2,005 ) 9mm thick

Sq.Mt. 265.00

43 Bagasse based plain partical board's interior grade ( I.S. 3,087 - 2,005 )12mm thick

Sq.Mt. 310.00

44 Bagasse based plain partical board's interior grade ( I.S. 3,087 - 2,005 )18mm thick

Sq.Mt. 420.00

45 Stainless steel pipe hand rail 40mm dia (A grade pipe no. 304Q) R.Mt. 1,205.00

46 Exterior Grade Plain Ecoboard - 09 mm thick Sq.Mt. 357.50

47 Exterior Grade Plain Ecoboard - 12 mm thick Sq.Mt. 364.00

48 Exterior Grade Plain Ecoboard - 15 mm thick Sq.Mt. 405.60

49 Exterior Grade Plain Ecoboard - 18 mm thick Sq.Mt. 468.00

50 Exterior Grade Plain Ecoboard - 21 mm thick Sq.Mt. 526.50

51 Exterior Grade Plain Ecoboard - 25 mm thick Sq.Mt. 585.00

52 Exterior Grade Plain Ecoboard - 30 mm thick Sq.Mt. 760.50

53 Exterior Grade Plain Ecoboard - 35 mm thick Sq.Mt. 845.00

54 Exterior Grade One Side Laminated Ecoboard - 09 mm thick Sq.Mt. 396.50

55 Exterior Grade One Side Laminated Ecoboard - 12 mm thick Sq.Mt. 429.00

56 Exterior Grade One Side Laminated Ecoboard - 15 mm thick Sq.Mt. 468.00

57 Exterior Grade One Side Laminated Ecoboard - 18 mm thick Sq.Mt. 526.50

58 Exterior Grade One Side Laminated Ecoboard - 21 mm thick Sq.Mt. 598.00

59 Exterior Grade One Side Laminated Ecoboard - 25 mm thick Sq.Mt. 676.00

60 Exterior Grade One Side Laminated Ecoboard - 30 mm thick Sq.Mt. 825.50

228

61 Exterior Grade One Side Laminated Ecoboard - 35 mm thick Sq.Mt. 923.00

62 Exterior Grade Both Side Laminated Ecoboard - 09 mm thick Sq.Mt. 427.70

63 Exterior Grade Both Side Laminated Ecoboard - 12 mm thick Sq.Mt. 460.20

64 Exterior Grade Both Side Laminated Ecoboard - 15 mm thick Sq.Mt. 499.20

65 Exterior Grade Both Side Laminated Ecoboard - 18 mm thick Sq.Mt. 557.70

66 Exterior Grade Both Side Laminated Ecoboard - 21 mm thick Sq.Mt. 627.20

67 Exterior Grade Both Side Laminated Ecoboard - 25 mm thick Sq.Mt. 707.20

68 Exterior Grade Both Side Laminated Ecoboard - 30 mm thick Sq.Mt. 856.70

Bd - R: ROOFING AND CEILING

1 A.C.Corrugated sheet 6mm thick Sq.Mt. 172.00

2 A.C. Trofford sheet 6mm thick Sq.Mt. 200.00

3 A.C.Plane sheet 6mm thick Sq.Mt. 146.00

4 A.C.Sheet ridge Pair 146.00

5 A.C.Gutter sheet ridge R.Mt. 146.00

6 A.C.Sheet plain 4mm thick Sq.Mt. 120.00

7 G.C.I. Sheet (Corrugated) 22 BWG M.T. 61,688.00

8 G.C.I. Sheet (Corrugated) 24 BWG M.T. 61,688.00

9 G.I. Sheet (plain) 22 BWG Sq.Mt. 600.00

10 G.I. Sheet (plain) 24 BWG Sq.Mt. 575.00

11 G.I.Washers Kg. 48.00

12 G.I. J or L hooks 6mm dia. No. 7.00

13 Nails iron all size Kg. 55.00

14 Mangalore tiles class AA No. 13.00

15 Mangalore Ridge / Hip tiles No. 22.00

16 Mangalore Glass tiles No. 310.00

17 Mangalore Pattern cowl Ventilator No. 61.00

18 Karva (for roof and sides 10kg bundle) Bundle 18.00

229

19 G.I. Pre coated trapezoidal 0.50 mm thick roof Metalic Coloured Sheet

Sq.Mt. 510.00

20 G.I. Pre coated Ridge Sheet R.Mt. 550.00

21 Gypsum powder Kg. 10.00

22 Aluminium Alloy plate 2mm thick Sq.Mt. 350.00

23 Aluminium sheeting fixed with encapsuled lens type reflective sheeting including 2% towards lettering , cost of angle iron, cost of drilling holes , nuts, bolts etc. and signs as applicable.

Sq.Mt. 15,460.00

24 Corrugated sheet , 3mm thick , "Thrie" beam section railing Kg. 66.00

25 Plaster Of Paris bags 90.00

26 Decorative Board of Fibrous Plaster of Paris 12 to 15 mm Sq.Mt. 285.00

27 Accostic Board 12 mm thick Sq.Mt. 460.00

28 Gypsum Board 12.5 mm thick Sq.Mt. 196.00

29 G.I. Sections Kg. 170.00

Bd - T: DOORS AND WINDOWS

1 Aldrop 300*16mm Chromium Plated No. 439.00

2 Aldrop 250*16 mm Brass Chromium plated No. 394.00

3 Brass Chromium plated box Aldrop 12 mm dia., 150 mm length No. 428.00

4 Aldrop Aiuminium 300*16mm No. 191.00

5 Aldrop Iron Oxidise 300*16mm No. 179.00

6 Aldrop Brass Oxidise 300*16mm No. 1,051.00

7 Aldrop Stainless steel 300*16mm No. 330.00

8 Aldrop Stainless steel 250*16 mm No. 310.00

9 Brass Oxidissed handle 125mm No. 118.00

10 Handle 125mm M.S. Chromium Plated No. 51.00

11 Handle 150mm Brass Chromium plated (Rounded Shape) No. 225.00

12 Handle 200mm Brass Chromium plated (Rounded Shape) No. 281.00

13 Handle 150mm Stainless Steel (Rounded Shape) No. 51.00

14 Handle 200mm Stainless Steel (Rounded Shape) No. 80.00

230

15 Handle Alluminium 125 mm No. 43.00

16 Handle for steel window No. 45.00

17 Handle Iron oxidised 100mm No. 34.00

18 Brass Oxidised Butt hinges 125mm 14 gauge No. 219.00

19 Brass Oxidised Butt hinges 100mm 14 gauge No. 197.00

20 Brass Oxidised Butt hinges 75mm 14 gauge No. 174.00

21 Brass Chromium Plated hinges 100mm length , 12 gauge No. 149.00

22 Brass Chromium Plated hinges 125mm length , 12 gauge No. 203.00

23 Iron hinges chromium plated 125mm No. 31.00

24 Iron hinges chromium plated 100mm No. 19.00

25 Iron hinges chromium plated 75mm No. 16.00

26 Handle Aluminium 125mm No. 43.00

27 Hinges Iron Oxidised 125mm No. 43.00

28 Hinges Iron Oxidised 100mm No. 38.00

29 Hinges Iron Oxidised 75mm No. 31.00

30 But Hinges Alluminium 125mm No. 84.00

31 But Hinges Alluminium 100mm No. 68.00

32 But Hinges Alluminium 90mm No. 59.00

33 Brass Double Acting Spring Hinges 100 mm 14 guage No. 675.00

34 Brass Double Acting spring Hinges - 125mm 14 gauge No. 844.00

35 G.I.Screw 125mm Doz. 68.00

36 G.I.Screw 100mm Doz. 38.00

37 G.I.Screw 75mm Doz. 19.00

38 G.I.Screw 50mm Doz. 16.00

39 G.I.Screw 25mm Doz. 8.00

40 Stainless Steel Hinges - 100mm 14 gauge No. 50.00

41 Stainless Steel Hinges - 125mm 14 gauge No. 68.00

42 Brass Screws 100mm Doz. 96.00

231

43 Brass Screws 75mm Doz. 60.00

44 Brass Screws 50mm Doz. 43.00

45 Brass Screws 25mm Doz. 19.00

46 Tower bolt brass oxidised 10mm dia.length 300mm No. 338.00

47 Tower bolt brass oxidised 10mm dia.length 250mm No. 310.00

48 Tower bolt brass oxidised 10mm dia.length 200mm No. 270.00

49 Tower bolt brass oxidised 10mm dia.length 150mm No. 225.00

50 Tower bolt Aluminium 10mm dia.length 300mm No. 135.00

51 Tower bolt Aluminium 10mm dia.length 250mm No. 113.00

52 Tower bolt Aluminium 10mm dia.length 200mm No. 101.00

53 Tower bolt Aluminium 10mm dia.length 150mm No. 90.00

54 Tower bolt M.S. Chromium plated 10mm dia,length 300mm No. 60.00

55 Tower bolt M.S. Chromium plated 10mm dia,length 250mm No. 52.00

56 Tower bolt M.S. Chromium plated 10mm dia,length 200mm No. 50.00

57 Tower bolt M.S. Chromium plated 10mm dia,length 150mm No. 45.00

58 Tower bolt Brass Chromium plated 150mm dia. 10mm No. 99.00

59 Tower bolt Brass Chromium plated 200mm dia. 10mm No. 155.00

60 Tower bolt Brass Chromium plated 250mm dia. 10mm No. 248.00

61 Tower bolt Brass Chromium plated 300mm dia. 10mm No. 315.00

62 Cold Rolled Steel Hollow Section Door frame 1,829*762mm No. 1,013.00

63 Cold Rolled Steel Hollow Section Door frame 1,981*610mm No. 1,181.00

64 Cold Rolled Steel Hollow Section Door frame 1,981*762mm No. 1,238.00

65 Cold Rolled Steel Hollow Section Door frame 1,981*914mm No. 1,283.00

66 Cold Rolled Steel Hollow Section Door frame 2,057*1,061mm No. 1,339.00

67 Cold Rolled Steel Hollow Section Door frame 2,057*762mm No. 1,266.00

68 Cold Rolled Steel Hollow Section Door frame 1,829*610mm No. 956.00

69 Aluminium stay 20cm No. 54.00

70 Aluminium stay 25cm No. 63.00

232

71 Aluminium stay 30cm No. 70.00

72 Jali fly proof Sq.Mt. 388.00

73 Jali chicken mesh Sq.Mt. 41.00

74 Jali welded mesh 25*25* 13 Guage Sq.Mt. 146.00

75 Jali welded mesh 25*25* 11 Guage Sq.Mt. 214.00

76 Jali welded mesh 50*25 13 Guage Sq.Mt. 180.00

77 Jali welded mesh 50*25 11 Guage Sq.Mt. 191.00

78 Jali welded mesh 50*50 13 Guage Sq.Mt. 158.00

79 Jali welded mesh 50*50 11 Guage Sq.Mt. 180.00

80 Wire glass 6 mm thick Sq.Mt. 510.00

81 X.P.M. 12mm * 18 gauge Sq.Mt. 113.00

82 Hold fast Iron 300*40*5mm No. 23.00

83 Hold fast for Steel gate No. 45.00

84 Sliding Door Bolt Brass Chromium plated 12mm dia. 200mm length

No. 141.00

85 Sliding Door Bolt Brass Chromium plated 12mm dia. 250mm length

No. 169.00

86 Sliding Door Bolt Stainless Steel 12mm dia. 200mm length No. 74.00

87 Sliding Door Bolt Stainless Steel 12mm dia. 250mm length No. 91.00

88 Sliding door bolt Chromium plated 250mm No. 169.00

89 Sliding door bolt Aluminium plated 250mm No. 158.00

90 Sliding door bolt Brass plated 250mm No. 394.00

91 Sliding door bolt ron plated 250mm No. 135.00

92 Glass plain 3mm Sq.Mt. 281.00

93 Glass plain 5mm Sq.Mt. 270.00

94 Glass obscured (bajara) 3mm Sq.Mt. 226.00

95 Glass obscured (bajara) 5mm Sq.Mt. 399.00

96 Brass oxidised hooks and eyes 200mm No. 56.00

97 Brass oxidised hooks and eyes 225mm No. 65.00

233

98 Iron oxidised hooks and eyes 100 mm No. 62.00

99 Iron oxidised hooks and eyes 200 mm No. 75.00

100 Aluminium hooks and eyes 200 mm No. 223.00

101 Chromium plated hooks and eyes 200 mm No. 75.00

102 Commercial Core Flush Door 35 mm Sq.Mt. 817.00

103 Bearing roller glazed window shutter No. 86.00

104 Chain and Stopper Iron No. 56.00

105 Stopper for steel window No. 31.00

106 Chain and stopper Brass Chromium plated No. 111.00

107 Chapras 100mm iron oxidised No. 37.00

108 G.I.Shoe 75mm to 100mm (18gauge) No. 28.00

109 Iron oxidised latch 250mm long No. 84.00

110 Housing box to rolling shutter Sq.Mt. 1,175.00

111 Mechanical Gear For Rolling Shutter No. 1,750.00

112 Mortice lock superior No. 956.00

113 Solid Core commercial shutter 30mm thick phenol bonded Sq.Mt. 788.00

114 Iron washer 12mm to 16mm No. 6.00

115 Plain aluminium sheet 24gauge (10'*4' of size) Sq.Mt. 302.00

116 Door Stopper Brass Oxidised No. 155.00

117 Door Stopper Stainless Steel No. 92.00

118 Door Stopper M.S. Chromium plated No. 68.00

119 Door Stopper Iron Oxidised No. 62.00

120 Hydraulic door closer. No. 956.00

121 Concealed Hydraulic door closer No. 2,970.00

122 Brass Chromium plated door eyes 180 degrees No. 37.00

123 Brass Chromium plated door chain No. 111.00

124 Parliamentary Hinges Brass 125 mm No. 434.00

125 Parliamentary Hinges Brass 100 mm No. 345.00

234

126 Parliamentary Hinges Mild Steel 125 mm No. 62.00

127 Parliamentary Hinges Mild Steel 100 mm No. 49.00

128 Alluminium Section Kg. 250.00

129 Nylon / PVC Gasket R.Mt. 33.00

130 Rubber Lining R.Mt. 13.00

131 Ball bearing 18 mm diameter No. 84.00

132 Alluminium Screw 32 x 6 mm, 25 x 6 mm Doz. 10.00

133 Concealed locking arrangement of 100 mm length for sliding window

No. 84.00

134 Alluminium Grill 7.50 mm thick Sq.Mt. 1,732.00

135 Alluminium pad handle 150 mm dia No. 195.00

136 Hydraulic floor spring heavy duty ( 150 Kg capacity) ISI mark No. 2,815.00

137 Hydraulic floor spring heavy duty ( 90 Kg capacity) ISI mark No. 2,700.00

138 Locking arrangement for alluminium openable door No. 495.00

139 Mild Steel C.P. Aldrop 300 x 16 mm dia No. 192.00

140 Iron Oxidized Handle 125 mm length No. 50.00

141 Iron Oxidized sliding door bolt 200 mm length, 12 mm dia No. 55.00

142 Powder Coating Sq.Mt. 500.00

143 Powder and Chemicals for colour anodizing process of alluminium sections

Kg. 98.00

NEW ITEMS

144 Aluminium Sheet 24 B.W.G Sq.Mt. 310.00

145 Lock for Sliding Shutter No. 95.00

146 All Bearing Roller No. 80.00

147 Welding Electrodes No. 6.25

148 M.S. Angle / Flat Kg. 72.00

149 C.R.C. Sheet Sq.Mt. 500.00

150 Abstrone Butadyne Styrine (ABS) Door Shutter including Transportation

No. 579.00

235

151 Puff Insulation 35-40 Kg/Cumt. Density Kg. 232.00

152 Hinges Steel 125mm No. 28.00

153 Hinges powder coated 125mm No. 75.00

154 Hinges Steel 100mm No. 22.00

155 Hinges powder coated 100mm No. 65.00

156 Hinges Steel 75mm No. 15.00

157 Hinges powder coated 75mm No. 55.00

158 G.I.Precoated trapezoidal zinc coated sheets 0.50mm thick Sq.Mt. 275.00

159 M.S. Tube 19 x 19 mm x 19 gauge R.Mt. 225.00

160 M.S. Tube 15 x 15 mm x 19 gauge R.Mt. 185.00

161 M.S.C.P. Tower Bolt 200mm No. 48.00

162 PVC Door Shutter 29 mm thick Factory Made Shutter Sq.Mt. 3,000.00

163 PVC Door Shutter 34 mm thick Factory Made Shutter Sq.Mt. 3,600.00

164 FRP Door Shutter 30 mm thick Factory Made Shutter Sq.Mt. 2,300.00

165 FRP Door Shutter 35 mm thick Factory Made Shutter Sq.Mt. 3,200.00

166 P.V.C. Gasket for Glass R.Mt. 40.00

167 Bison Pannel Sq.Mt. 420.00

168 G.I.Hook 25mm No. 10.00

169 P.V.C. Sheet 5 mm R.Mt. 110.00

170 Flush Door 30 mm Sq.Mt. 980.00

171 P.V.C. Sheet Moulded 2mm Sq.Mt. 70.00

172 P.V.C. Sheet Predominated 2mm Sq.Mt. 160.00

173 Modiband Kg. 80.00

174 Feviquick Litre 330.00

Note: For the Original works of the buildings, only Brass Chromium plated or stainless steel fixtures shall be used for doors and windows according to utility of the building.

Bd - V: WATER SUPPLY AND SANITORY FITTINGS

1 G.I. Pipe 100mm dia. Medium type R.Mt. 728.00

236

2 G.I. Pipe 100mm dia. Heavy type R.Mt. 837.00

3 G.I. Pipe 15mm dia. Medium type R.Mt. 83.00

4 G.I. Pipe 15mm dia. Heavy type R.Mt. 94.00

5 G.I. Pipe 20mm dia. Medium type R.Mt. 109.00

6 G.I. Pipe 20mm dia.Heavy type R.Mt. 121.00

7 G.I. Pipe 25mm dia. Medium type R.Mt. 151.00

8 G.I. Pipe 25mm dia. Heavy type R.Mt. 173.00

9 G.I. Pipe 32mm dia. Medium type R.Mt. 188.00

10 G.I. Pipe 32mm dia.Heavy type R.Mt. 224.00

11 G.I. Pipe 40mm dia. Medium type R.Mt. 227.00

12 G.I. Pipe 40mm dia. Heavy type R.Mt. 263.00

13 G.I. Pipe 50mm dia. Medium type R.Mt. 301.00

14 G.I. Pipe 50mm dia. Heavy type R.Mt. 346.00

15 G.I. Pipe 65mm dia. Medium type R.Mt. 378.00

16 G.I. Pipe 65mm dia. Heavy type R.Mt. 439.00

17 G.I. Pipe 80mm dia. Medium type R.Mt. 481.00

18 G.I. Pipe 80mm dia. Heavy type R.Mt. 517.00

19 G.I.Clamps 100mm to 150mm No. 20.00

20 G.I.Clamps 12mm to 32mm No. 12.00

21 G.I.Clamps 40mm to 80mm No. 13.00

22 G.I.Fixtures Kg. 47.00

23 G.I.Screws 30mm No. 2.90

24 G.I.Screws 40mm No. 3.45

25 G.I.Union 25mm dia. No. 19.00

26 Gully trap cover with frame No. 164.00

27 Gun Metal stop tap with crutch wheel 20mm No. 164.00

28 Gun metal stop tap with crutch wheel 25mm No. 208.00

29 GI.Wire bolt 30 x1.6cm No. 24.00

237

30 Gun metal stop tap with crutch wheel 15mm No. 144.00

31 Gun metal stop tap with crutch wheel 20mm No. 176.00

32 Gun metal stop tap with crutch wheel 25mm No. 200.00

33 Gun metal stop tap with crutch wheel 32mm No. 188.00

34 R.C.water tank 1.2mtr.dia. (2.5m length) No. 8,315.00

35 One piece molded water tank H.D.P. Container Syntex or alike (above 1,000 ltr.)

Litre 6.70

36 One piece molded water tank H.D.PContainer Syntex or alike (upto 1,000 ltr.)

Litre 6.80

37 C.I.Bend 75mm dia. No. 220.00

38 C.I.Bend 100mm dia. No. 258.00

39 C.I.Bip tap 12mm No. 39.00

40 C.I.Grating 150mm dia. No. 57.00

41 C.I.Grating 100mm dia. No. 28.00

42 C.I.Grating 75mm dia. No. 23.00

43 C.I.Brackets Pair 116.00

44 C.I.Collers 100mm dia. No. 205.00

45 C.I.Copllers 75mm dia. No. 174.00

46 C.I.Cover 45*30 cm with frame No. 737.00

47 C.I.Cowl / Vent 100mm dia. No. 297.00

48 C.I.Cowl / Vent 150mm dia. No. 352.00

49 C.I.Cowl / Vent 75mm dia. No. 230.00

50 C.I.Hinged Cover with frame No. 522.00

51 C.I.Man hole cover 50 kg. No. 2,365.00

52 C.I.Man hole cover 75 kg. No. 2,430.00

53 C.I.Man hole cover 100 kg. No. 2,695.00

54 C.I.Man hole cover 175 kg.Heavy (0.9*0.45m) No. 5,780.00

55 C.I.Nahani trap 100mm dia.(375mm long) No. 445.00

56 C.I.Nahani trap 75 to 80mm dia.(375mm long) No. 350.00

238

57 C.I.100*75*300 long arm (wt. 6kg)nahani trap No. 525.00

58 C.I.Soil pipe 100mm dia. R.Mt. 735.00

59 C.I.Soil pipe 150mm dia. R.Mt. 1,246.00

60 C.I,Soil pipe 75 to 80mm dia. R.Mt. 620.00

61 C.I.Rain water pipe 75mm dia. R.Mt. 632.00

62 C.I.Rain water pipe 100mm dia. R.Mt. 770.00

63 C.I.Rain water pipe 150mm dia. R.Mt. 1,320.00

64 C.I.Shoe 75 mm dia. No. 204.00

65 C.I. Shoe 100 mm dia. No. 270.00

66 C.I.Shoe 150mm No. 615.00

67 Ball cock 15mm dia.P.V.C.FLOT No. 145.00

68 Ball cock 25mm dia.P.V.C.FLOT No. 250.00

69 Ball cock 40mm dia.P.V.C.FLOT No. 470.00

70 Ball cock 50mm dia.P.V.C.FLOT No. 520.00

71 Bid cock cock stop tap brass heavy 15mm No. 140.00

72 Bid cock cock stop tap brass heavy 20mm No. 187.00

73 Bid cock cock stop tap brass heavy 25mm No. 247.00

74 Bid tap 12mm brass medium No. 137.00

75 Colour wash hand basin 55*40cm No. 1,000.00

76 Colour wash hand basin 63*45cm No. 1,485.00

77 White glazed wash basin 45*30cm No. 395.00

78 White glazed wash hand basin 55*50cm No. 800.00

79 P.V.C. flexible Waste Pipe 32 mm dia No. 50.00

80 White Glazed Wash Hand Basin 63 x 45 cm No. 680.00

81 Sink white glazed 45*20*30cm No. 880.00

82 Pedestal for wash basin (standard size) No. 847.00

83 C.C.Septic tank 0.9m dia.(2.5m long) No. 6,000.00

84 C.C.Septic tank 1.20m dia.(2.5m long) No. 8,250.00

239

85 C.I.Steps for manhole No. 61.00

86 C.I.Cover with frame (Gully trap) No. 253.00

87 C.I.Plug Bend 150MM dia. No. 506.00

88 Clamp for G.I.pipe 25mm No. 9.00

89 Colour European type W.C.Pan No. 1,400.00

90 Earopean type glazed W.C.pan No. 1,250.00

91 W.C.PAN 64 CM.1st class with tap No. 1,090.00

92 W.C.PAN 68 CM.1st class with tap (Orissa) No. 1,175.00

93 W.C.PAN Coloured glazed 64CM.(Orissa) No. 1,188.00

94 W.C.PAN White glazed 58 CM.Indian. No. 495.00

95 W.C.PAN White glazed 64 CM (Orissa) No. 1,012.00

96 W.C.PAN White glazed 57.50 CM (Orissa) No. 1,050.00

97 W.C.PAN with P trap 685mm No. 630.00

98 Fibre flushing tank for W.C. No. 1,050.00

99 Flushing tank automatic Urinal 10ltr. C.I. No. 1,200.00

100 Flushing tank automatic Urinal 5ltr. (P.V.C.) No. 760.00

101 Low level flush pr. St. 10ltr. No. 920.00

102 Flat back Urinal No. 750.00

103 Stall type Urinal No. 955.00

104 Lipped type Urinal No. 605.00

105 Coloured glazed full stall Urinal No. 3,450.00

106 Wheel stop tap brass 15mm No. 154.00

107 Wheel stop tap brass 20mm No. 198.00

108 Wheel stop tap brass 25mm No. 260.00

109 Socket brass for 32mm tap No. 54.00

110 Socket brass for 40mm tap No. 66.00

111 Socket brass for 50mm tap No. 79.00

112 Socket brass for 65mm tap No. 97.00

240

113 Socket for 100mm tap No. 100.00

114 Socket for 15mm tap No. 25.00

115 Socket for 20mm tap No. 33.00

116 Socket for 25mm tap No. 39.00

117 Socket for 32mm tap No. 46.00

118 Socket for 40mm tap No. 60.00

119 Socket for 50mm tap No. 72.00

120 Socket for 65mm tap No. 83.00

121 Socket for 80mm tap No. 94.00

122 Socket for G.I.PIPE 150mm tap No. 105.00

123 Span Yarn No. 72.00

124 Strainer for 100mm No. 528.00

125 Strainer for 40mm No. 182.00

126 Strainer for 50mm No. 207.00

127 Strainer for 80mm No. 340.00

128 Strainer for 15mm No. 60.00

129 Strainer for 20mm No. 65.00

130 Strainer for 25mm No. 80.00

131 Stone ware pipe 100mm dia. R.Mt. 72.00

132 Stone ware pipe 150mm dia. R.Mt. 138.00

133 Stone ware pipe 225mm dia. R.Mt. 230.00

134 Stone ware glazed pipe half round 100mm dia. R.Mt. 60.00

135 Stop tap brass with crunch wheel 15mm dia. No. 115.00

136 Towel rod with clamps 16mm dia. No. 121.00

137 Mirror 40*50cm. With plastic frame No. 365.00

138 Brass T Thimble Socket 32mm dia. Pair 110.00

139 Brass wheel stop tap 32mm dia. No. 440.00

140 Brass wheel stop tap 40mm dia. No. 490.00

241

141 Brass wheel stop tap 50mm dia. No. 510.00

142 Brass wheel stop tap 65mm dia. No. 580.00

143 Brass wheel stop tap 80mm dia. No. 620.00

144 Half turn flush cock 25mm dia. No. 305.00

145 8 CM dia.M.S.TUBE 40 to 65 cm long No. 88.00

146 10 CM dia.M.S.TUBE 40 to 65 cm long No. 105.00

147 12mm flexble inlet pipe connection No. 46.00

148 Alkathene pipe 40mm dia.Heavy type black pipe for Drainage R.Mt. 44.00

149 A.C.Air extractor 45cm dia. No. 2,390.00

150 Bell mouth cover 100mm dia. No. 60.00

151 Box chamber with lock 0.6*0.45m No. 110.00

152 Brass nozzle pillar tap 12mm No. 160.00

153 Black bakelite seat to european closer No. 215.00

154 Concussion push button type gun metal tap 15 to 25mm dia. No. 85.00

155 Coupling cast Iron 100mm dia. No. 150.00

156 Coupling cast Iron 80mm dia. No. 100.00

157 Chromium plated 12mm dia.bib cock No. 77.00

158 Chromium plated brass fountain jet No. 121.00

159 Chromium plated brass No.plate(60*60*1.5mm) No. 55.00

160 Chromium plated brass No.plate(95*40*1.05mm) No. 63.00

161 C.I.Tee No. 225.00

162 C.I.Trap grating 15*10 cm No. 121.00

163 C.I.Y junction 100mm dia. No. 440.00

164 C.I.Y junction 150mm dia. No. 740.00

165 C.I.Y junction 75mm dia. No. 330.00

166 Enameled bend 40mm dia. No. 25.00

167 Ferrul for C.I.pipr 100mm No. 230.00

168 White glazed foot rest chequred 25*10 cm Pair 123.00

242

169 Half round earthware pipe 100mm(60cm long) No. 40.00

170 Half round earthware pipe 150mm(60cm long) No. 36.00

171 Bath stone trap 0.6*0.6*0.45m No. 55.00

172 Hum Prope Kg. 61.00

173 Half round chaina ware pipe 100mm(60cm long) No. 36.00

174 Half round chaina ware pipe 75mm(60cm long) No. 49.00

175 B.R.C.Fabric 5mm thick Sq.Mt. 173.00

176 Lead pipe 12mm dia. R.Mt. 178.00

177 Lead pipe 25mm dia. R.Mt. 232.00

178 Lead pipe 32mm dia. R.Mt. 255.00

179 Lead pipe 40mm dia. R.Mt. 285.00

180 Lead plate Kg. 84.00

181 Mohagani seat with lid No. 330.00

182 Mosquito proof coupling No. 42.00

183 Non-return valve 15mm for water meter No. 194.00

184 Non-return valve 25mm for water meter No. 261.00

185 Non-return valve 20mm for water meter No. 244.00

186 Piller tap 12mm dia.chromium plated heavy No. 173.00

187 P.Trap and lead pipe upto 40mm dia. No. 170.00

188 Rubber gasket (25, 28 and 20 cm) R.Mt. 35.00

189 Rubber Incertion Kg. 65.00

190 Rubberised adhesive Litre 213.00

191 Salt glazed stone ware gully trap (150*150mm) No. 97.00

192 Self project tap brass chromium plated 15mm No. 85.00

193 Sewer trap No. 300.00

194 Shower rose chromium plated brass 10cm No. 107.00

195 P.V.C. pipe 15mm dia.10kg pressure(class IV) R.Mt. 18.00

196 P.V.C. pipe 20mm dia.10kg pressure(class IV) R.Mt. 24.00

243

197 P.V.C. pipe 25mm dia.10kg pressure(class IV) R.Mt. 36.00

198 P.V.C. pipe 32mm dia.10kg pressure(class IV) R.Mt. 44.00

199 P.V.C. pipe 40mm dia.10kg pressure(class IV) R.Mt. 62.00

200 Piller tap 12mm dia.chromium plated light No. 170.00

201 Bleaching Powder Kg. 65.00

202 Potassium Permanganate Kg. 400.00

203 Nylon Brush No. 55.00

204 Duster No. 45.00

205 Plastic Bucket No. 120.00

206 Coir Kg. 55.00

207 Gunny Cloth R.Mt. 32.00

208 Kharata No. 30.00

209 P.V.C. pipe 50mm dia.10kg pressure(class IV) R.Mt. 92.00

210 P.V.C. pipe 60mm dia.10kg pressure(class IV) R.Mt. 94.00

211 P.V.C. pipe 75mm dia.4 kg pressure(class II) R.Mt. 117.00

212 P.V.C. 75 mm Soil Pipe 6 Kg Pressure R.Mt. 200.00

213 P.V.C. pipe 90mm dia.4 kg pressure(class II) R.Mt. 141.00

214 P.V.C.pipe 110mm dia.4kg.pressure (class II) R.Mt. 173.00

215 P.V.C. 110 mm Rain Water Pipe 6Kg Pressure R.Mt. 200.00

216 P.V.C. 110 mm Soil Pipe 6 Kg Pressure R.Mt. 320.00

217 P.V.C.pipe 140mm dia.4kg.pressure (class II) R.Mt. 225.00

218 P.V.C.pipe 160mm dia.4kg.pressure (class II) No. 250.00

219 P.V.C.pipe 160mm dia.Soil Pipe R.Mt. 530.00

220 P.V.C.pipe 160mm dia. Rain Water Pipe R.Mt. 430.00

221 P.V.C.Socket 15mm dia. No. 12.00

222 P.V.C.Socket 20mm dia. No. 16.00

223 P.V.C.Socket 25mm dia. No. 22.00

224 P.V.C.Socket 32mm dia. No. 33.00

244

225 P.V.C.Socket 40mm dia. No. 45.00

226 P.V.C.Socket 50mm dia. No. 65.00

227 P.V.C.Socket 60mm dia. No. 75.00

228 P.V.C.Flushing tank (12 ltr. Capacity) No. 11,140.00

229 Flush valve 32mm dia. No. 1,200.00

230 Bottle track chromium plated 32mm dia. No. 450.00

231 Ferocret tank Litre 5.45

232 Stainless Steel sink of size 600*510*200mm of nirali or equivalent make No. 5,195.00

233 C.P.pillar cock jaquar make continental (Cat.No. CON-011) No. 650.00

234 C.P.pillar cock long neck with aerator jaquar make continental (Cat.No. CON-021)

No. 850.00

235 C.P.Bib cock (ISI) jaquar make continental (Cat.No. CON-037) No. 625.00

236 C.P.Bib Cock long thread jaquar make continental (Cat.No. CON-039) No. 600.00

237 C.P.2-way bib cock jaquar make continental (Cat.No. CON-041) No. 850.00

238 C.P.bib cock with wall flange long thread jaquar make continental (Cat.No. CON-047)

No. 650.00

239 C.P.Bib cock with nozzle jaquar make continental (Cat.No. CON-049) No. 700.00

240 C.P.Angular stop cock jaquar make continental (Cat.No. CON-053) No. 600.00

241 C.P.Angular stop cock long thread jaquar make continental (Cat.No. CON-055)

No. 625.00

242 C.P.angular stop cock with wall flange jaquar make continental (Cat.No. CON-059)

No. 625.00

243 C.P.central hole basin mixer without popup waste system with 450mm long braided hoses jaquar make continental (Cat.No. CON-167B)

No. 2,200.00

244 C.P.wall mixer with telephone shower arragnement only but without teltphone shower crutch jaquar make continental (Cat.No. CON-217)

No. 2,500.00

245 C.p.wall mixer non-telephonic shower arrangement jaquar make continental (Cat.No. CON-219)

No. 2,200.00

246 C.P.wall mixer(wall mounted model) with telephone shower arrangement only and with telephone shower crutch jaquar make continental (Cat.No. CON-267)

No. 2,800.00

245

247 C.P.wall mixer with provision for overhead shower with 115mm long bend pipe and wall flange jaquar make continental (Cat.No. CON-273UPR)

No. 2,900.00

248 C.P.sink mixer with swinging casted spout (wall mounted) jaquar make continental (Cat.No. CON-309)

No. 2,200.00

249 C.P.sink mixer swinging spout (table mounted model) 450mm long braided hoses jaquar make continental (Cat.No. CON-309B)

No. 2,200.00

250 C.P.sink cock with swinging casted spout jaquar make continental (Cat.No. CON-347)

No. 1,050.00

251 C.P.sink cock with raised 'J' shaped swinging casted spout (table mounted) jaquar make continental (Cat.No. CON-359)

No. 1,200.00

252 C.p.shower arm 190mm long light body with wall flange jaquar make continental (Cat. No. SHA - 477)

No. 400.00

253 C.P.Flush cock with wall flange 25mm with plain knob jaquar make continental (Cat.No. FLR 6,081)

No. 1,650.00

254 C.P.Towel rail 24" jaquar make continental (Cat. No. ACN 1,111N) No. 975.00

255 C.P.Towel ring square jaquar make continental(Cat. No. ACN 1,121N)

No. 825.00

256 C.P.Soap dish hooker jaquar make continental(Cat. No. AKB 35,731)

No. 875.00

257 C.P.soap dish (polyurethane) jaqua make continental (Cat. No. AQN 7,733)

No. 900.00

258 C.P.Toilet paper holder jaquar make continental (Cat. No. AQ 7,751) No. 850.00

259 C.P.Toilet rack 24"with lower hanger jaquar make continental (Cat. No. ACN 1,181N)

No. 2,450.00

260 C.P.Handshower (health faucet) 1m.PVC tube with wall hook jaquar make (Cat. No. ALD 563)

No. 1,050.00

261 C.P.Pillar cock jaquar make queen's collection (quarter turn fitting) (Cat. No. QQT 7,011)

No. 1,200.00

262 C.P.Bib cock with wall flange aqua make queen's collection (quarter turn fitting) (Cat. No. QQT7,037)

No. 1,200.00

263 C.P.2-way bib cock with wall flange aqua make queen's collection (quarter turn fitting) (Cat. No. QQT 7,041)

No. 1,650.00

264 C.P.Angular stop cock with wall flange aqua make queen's collection (quarter turn fitting) (Cat. No. QQT 7,053 )

No. 1,150.00

246

265 C.P.central hole basin mixer with regular spout without popup waste system with 450mm long braided hoses jaquar make queen's collection (quarter turn fitting) (Cat. No. QQT 7,167bB )

No. 3,100.00

266 C.P.central hole basin mixer with regular spout with popup waste system with 450mm long braided hoses jaquar make queen's collection (quarter turn fitting) (Cat. No. QQT 7,169b )

No. 2,950.00

267 C.P.central hole basin mixer with small spout without popup waste system with 450mm long braided hoses jaquar make queen's collection (quarter turn fitting) (Cat. No. QQT 7,171B)

No. 2,550.00

268 C.P.wall mixer (wall mounted model) with telephonic shower arrangement only but without crutch jaquar make queen's collection (quarter turn filling) (Cat. No. QQT 7,217 )

No. 3,375.00

269 C.P.wall mixer non-telephonic shower system jaquar make queen's collection (quarter turn filling) (Cat. No. QQT 7,219 )

No. 3,075.00

270 C.P.wall mixer (wall mounted model) with telephonic shower arrangement only and with telephone shower crutch jaquar make queen's collection (quarter turn filling) (Cat. No. QQT 7,267)

No. 3,675.00

271 Hydraulic door closer No. 650.00

272 CPCV pipe 15mm dia. R.Mt. 63.00

273 CPCV pipe 20mm dia. R.Mt. 79.00

274 CPCV pipe 25mm dia. R.Mt. 107.00

275 CPCV pipe 32mm dia. R.Mt. 156.00

276 CPCV pipe 40mm dia. R.Mt. 214.00

277 CPCV pipe 50mm dia. R.Mt. 350.00

278 Coupling for 15mm dia. No. 8.00

279 Coupling for 20mm dia. No. 15.00

280 Coupling for 25mm dia. No. 27.00

281 Coupling for 32mm dia. No. 47.00

282 Coupling for 40mm dia. No. 69.00

283 Coupling for 50mm dia. No. 145.00

284 Elbow 90 Degree for 15mm dia. No. 11.00

285 Elbow 90 Degree for 20mm dia. No. 20.00

286 Elbow 90 Degree for 25mm dia. No. 40.00

247

287 Elbow 90 Degree for 32mm dia. No. 73.00

288 Elbow 90 Degree for 40mm dia. No. 116.00

289 Elbow 90 Degree for 50mm dia. No. 241.00

290 Tea for 15mm dia. No. 14.00

291 Tee for 20mm dia. No. 33.00

292 Tee for 25mm dia. No. 52.00

293 Tee for 32mm dia. No. 98.00

294 Tee for 40mm dia. No. 142.00

295 Tee for 50mm dia. No. 304.00

296 End cap for 15mm dia. No. 5.50

297 End cap for 20mm dia. No. 11.00

298 End cap for 25mm dia. No. 17.00

299 End cap for 32mm dia. No. 33.00

300 End cap for 40mm dia. No. 48.00

301 End cap for 50mm dia. No. 103.00

302 Ball valves for 15mm dia. No. 403.00

303 Ball valves for 20mm dia. No. 461.00

304 Ball valves for 25mm dia. No. 575.00

305 Ball valves for 32mm dia. No. 1,094.00

306 Ball valves for 40mm dia. No. 1,672.00

307 Ball valves for 50mm dia. No. 2,343.00

308 Male adapter (Brass Threads) for 15mm dia. No. 124.00

309 Male adapter (Brass Threads) for 20mm dia. No. 151.00

310 Male adapter (Brass Threads) for 25mm dia. No. 238.00

311 Male adapter (Brass Threads) for 32mm dia. No. 491.00

312 Male adapter (Brass Threads) for 40mm dia. No. 612.00

313 Male adapter (Brass Threads) for 50mm dia. No. 1,178.00

314 Male adapter (Plastic Threads) for 15mm dia. No. 10.50

248

315 Male adapter (Plastic Threads) for 20mm dia. No. 18.00

316 Male adapter (Plastic Threads) for 25mm dia. No. 28.00

317 Male adapter (Plastic Threads) for 32mm dia. No. 43.00

318 Male adapter (Plastic Threads) for 40mm dia. No. 63.00

319 Male adapter (Plastic Threads) for 50mm dia. No. 123.00

320 Female adapter (Brass Threads) for 15mm dia. No. 120.00

321 Female adapter (Brass Threads) for 20mm dia. No. 153.00

322 Female adapter (Brass Threads) for 25mm dia. No. 208.00

323 Female adapter (Brass Threads) for 32mm dia. No. 501.00

324 Female adapter (Brass Threads) for 40mm dia. No. 563.00

325 Female adapter (Brass Threads) for 50mm dia. No. 1,078.00

326 Female adapter (Plastic Threads) for 15mm dia. No. 15.00

327 Female adapter (Plastic Threads) for 20mm dia. No. 24.00

328 Female adapter (Plastic Threads) for 25mm dia. No. 36.00

329 Union for 15mm dia. No. 130.00

330 Union for 20mm dia. No. 191.00

331 Union for 25mm dia. No. 219.00

332 Union for 32mm dia. No. 284.00

333 Union for 40mm dia. No. 427.00

334 Union for 50mm dia. No. 797.00

335 Cross for 15mm dia. No. 22.00

336 Cross for 20mm dia. No. 49.00

337 Step over Bend 15mm dia. No. 37.00

338 Step over Bend 20mm dia. No. 62.00

339 Tee holder for 15mm dia. No. 5.80

340 Tee holder for 32mm dia. No. 7.50

341 End plug threaded for 15mm dia. No. 8.00

342 R.C.C.Chamber cover with frame 90cm*45cm Heavy Duty 225kg No. 1,900.00

249

343 R.C.C.Chamber cover with frame 90cm*45cm Medium Duty 140kg No. 1,150.00

344 R.C.C.Chamber cover with frame 60cm*45cm Heavy Duty 160kg No. 1,700.00

345 R.C.C.Chamber cover with frame 60cm*45cm Medium Duty 100kg No. 840.00

346 I.S.I.Ferrul Connection15mm dia. No. 375.00

347 I.S.I.Ferrul Connection 20mm dia. No. 630.00

348 I.S.I.Ferrul Connection 25mm dia. No. 1,050.00

349 I.S.I.Ferrul Connection 32mm dia. No. 1,775.00

350 I.S.I.Ferrul Connection 40mm dia. No. 2,600.00

351 I.S.I.Ferrul Connection 50mm dia. No. 4,500.00

352 Water meter 15 mm diameter No. 1,100.00

353 Water meter 20 mm diameter No. 1,700.00

354 Water meter 25 mm diameter No. 3,000.00

355 Water meter 40 mm diameter No. 3,500.00

356 Water meter 50 mm diameter No. 8,000.00

357 Water meter 80 mm diameter No. 9,500.00

358 Water meter 100 mm diameter No. 13,500.00

359 Non return Valve 40 mm diameter No. 400.00

360 Non return Valve 50 mm diameter No. 3,063.00

361 Non return Valve 80 mm diameter No. 4,360.00

362 Non return Valve 100 mm diameter No. 6,211.00

363 Colour Wash Hand Basin 0.45 x 0.30 No. 800.00

364 White Glaze Earth Sink 0.6 x 0.2 x 0.45 No. 1,100.00

365 Clamp for G.I.pipe 200mm No. 60.00

366 Earopean type glazed W.C.pan 68cm No. 1,320.00

367 Earopean white glazed earthen ware closet pan No. 1,000.00

368 P.V.C. Nahni Trap R.Mt. 160.00

369 P.V.C. Connector. 15 mm dia No. 80.00

250

Bd.W: MISCELLANEOUS

1 Barbed Wire Kg. 68.00

2 Chunam / White lime Powder Kg. 13.00

3 Coir String Kg. 83.00

4 Copper Plate Kg. 345.00

5 Copper upper terminal (Lightening) Kg. 335.00

6 Copper Tape width 25mm*3mm thick Kg. 345.00

7 Cripped wire 3' - 0" , 4' - 0" and 5' - 0" wide Sq.Mt. 170.00

8 Maxphalt M.T. 8,625.00

9 Mosquito proof Nylone net Sq.Mt. 66.00

10 Nylone Rope Kg. 174.00

11 Tarat 36" width (Gunny cloth) R.Mt. 26.00

12 Glass Brick Sq.Mt. 1,750.00

13 Tatti Sq.Mt. 15.00

14 T.W. Bullies 100 mm dia Upto 3.50 Mtr R.Mt. 550.00

15 Aluminium Strips 50 mm x 3 mm R.Mt. 55.00

16 Clorophyriphoas Litre 210.00

17 D.D.V.P. Litre 300.00

18 Malathion Litre 150.00

19 Pine Oil Litre 65.00

20 Lightening Conductor No. 7,500.00

21 Chain link 3' - 0" , 4' - 0" and 5' - 0" wide Sq.Mt. 155.00

22 Salt Kg. 10.00

Rd: ROAD WORKS

1 R.C.C.Boundary stone 75*20*15cm No. 348.00

2 R.C.C.Guard stone (Standard Size ) No. 348.00

3 Trap Guard Stone No. 75.00

4 R.C.C.Kilometer Stone No. 1,373.00

251

5 R.C.C. Fifth Kilometer Stone No. 1,600.00

6 Laterite Oversize Metal Cu.Mt. 150.00

7 Laterite Rubble on Quarry Cu.Mt. 128.00

8 Laterite Stones 45*22*20 cm No. 30.00

9 Laterite Stones 45*30*20 cm No. 30.00

10 Laterite Stones 75*25*20 cm No. 33.00

11 Trap metal 40mm blasted Cu.Mt. 310.00

12 Trap metal 40mm un-blasted Cu.Mt. 305.00

13 Bitumen primer Litre 86.00

14 Fire wood Quintal 263.00

15 Solvent Litre 15.00

16 Gravel at nalla bed Cu.Mt. 230.00

17 Delinators from ISI Certified firm as per the standard drawing given in IRC 79

Each 700.00

18 Hot applied thermoplastic compound Litre 75.00

19 LDO Litre 48.90

20 Reflectorising glass beads Kg. 71.50

21 Traffic cones with 150 mm reflective sleeve No. 700.00

22 Stoxing Paint Litre 650.00

23 Protective Transperent Coat Litre 770.00

24 Retroreflective Paint Tape Sq.Cm. 0.55

CD: CROSS DRAINAGE WORKS

1 R.C.C.Pipe 1,200mm dia.(Np3)2.5m long with coller IRC No. 16,888.00

2 R.C.C.Pipe 1,100mm dia.(Np3)2.5m long with coller IRC No. 16,351.00

3 R.C.C.Pipe 1,000mm dia.(Np3)2.5m long with coller IRC No. 12,360.00

4 R.C.C.Pipe 900mm dia.(Np3)2.5m long with coller IRC No. 11,019.00

5 R.C.C.Pipe 800mm dia.(Np3)2.5m long with coller IRC No. 9,887.00

6 R.C.C.Pipe 700mm dia.(Np3)2.5m long with coller IRC No. 7,640.00

252

7 R.C.C.Pipe 600mm dia.(Np3)2.5m long with coller IRC No. 5,744.00

8 R.C.C.Pipe 500mm dia.(Np3)2.5m long with coller IRC No. 4,529.00

9 R.C.C.Pipe 450mm dia.(Np3)2.5m long with coller IRC No. 3,784.00

10 R.C.C.pipe Np2 class 1,000mm dia. 2.5m long No. 7,060.00

11 R.C.C.NP2 Pipe Collar 1,000 mm Dia. No. 1,000.00

12 R.C.C.pipe Np2 class 1,200mm dia. 2.5m long No. 10,208.00

13 R.C.C.NP2 Pipe Collar 1,200 mm Dia. No. 1,200.00

14 R.C.C.pipe Np2 class 900mm dia. 2.5m long No. 6,123.00

15 R.C.C.NP2 Pipe Collar 900 mm Dia. No. 700.00

16 R.C.C.pipe Np2 class 800mm dia. 2.5m long No. 5,094.00

17 R.C.C.NP2 Pipe Collar 800 mm Dia. No. 600.00

18 R.C.C.pipe Np2 class 700mm dia. 2.5m long No. 4,272.00

19 R.C.C.pipe Np2 class 600mm dia. 2.5m long No. 3,011.00

20 R.C.C.NP2 Pipe Collar 600 mm Dia. No. 400.00

21 R.C.C.pipe Np2 class 500mm dia. 2.5m long No. 2,433.00

22 R.C.C.pipe Np2 class 450mm dia. 2.5m long No. 1,925.00

23 R.C.C.NP2 Pipe Collar 450 mm Dia. No. 250.00

24 R.C.C.pipe Np2 class 100mm dia. 2m long No. 481.00

25 R.C.C.pipe Np2 class 150mm dia. 2m long No. 518.00

26 R.C.C.pipe Np2 class 225mm dia. 2m long No. 593.00

27 R.C.C.pipe Np2 class 300mm dia. 2m long No. 938.00

28 RCC Pipe NP 4 heavy duty non presure pipe 1,000 mm diameter R.Mt. 6,798.00

29 RCC Pipe NP 4 heavy duty non presure pipe 1,200 mm diameter R.Mt. 8,444.00

30 RCC Pipe NP 4 heavy duty non presure pipe 900 mm diameter R.Mt. 5,312.00

BR - : BRIDGE WORKS

1 Bitumen Joint FILLER 18kg Tin No. 860.00

2 Bitumen Pad 25mm thick 1.20 x 1.20 Mtr No. 1,320.00

253

3 Restrained Neoprene Bearing Cu.Cm 1.00

4 Epoxy primer Kg. 380.00

5 Gelatin Kg. 76.00

6 Steel pipe 25 mm external dia as per IS 1239 R.Mt. 120.00

7 Steel pipe 50 mm external dia as per IS 1239 R.Mt. 240.00

8 Steel wire rope 20 mm / 40 mm Kg. 45.00

9 Welded steel wire fabric Kg. 60.00

10 Electric Detonators No. 10.00

11 Bottle Nut inner dia 25 mm / 32 mm Kg. 120.00

12 Compressible Fibre Board 20 mm thick Sq.Mt. 940.00

13 Premoulded Joint FIller Kg. 52.00

14 Wooden Bullies 8 inch dia & 10 feet long No. 325.00

15 Wooden Bullies 2 inch dia & 10 feet long R.Mt. 13.00

Material List for MORT&H - BRIDGE WORKS

1 Fly Ash confirming to IS: 3,812 (part II and I) at MHP Plant / Batching Plant / Crushing Plant

Cu.Mt. 103.00

2 Filter media / filter material as per table 300 - 3 (MORT&H Specifications)

Cu.Mt. 375.00

3 AC pipe 100 mm dia R.Mt. 95.00

4 Alluminium sheeting sheet with encapsulated lense type reflective sheeting including 2% towards towards lettering, cost of angle iron, cost of drilling holes, nuts bolts etc and signs as applicable.

Sq.Mt. 14,060.00

5 Bearing (Cost of fix point bearing 250 MT) No. 32,890.00

6 Bearing (Cast Steel rocker bearing assembly of 250 Tonne) No. 47,361.00

7 Bearing ( Elastomeric bearing assembly consisting of 7 internal layers of elastomar bounded to 6 nos internal reinforcing steel laminate by the process of vulcanisation).

No. 16,400.00

8 Bearing ( Forged steel roller bearing of 250 tonne) No. 110,000.00

9 Bearing ( Pot type bearing assembly consisting of a metal piston supported by a disc PTFE pads 250 MT

No. 39,225.00

254

10 Bearing (PTFE sliding plate bearing assembly of 80 tonnes) (polytetra fluoro ethylene)

No. 13,220.00

11 Bearing (Supply of fixed pot bearing of 80 tonnes) No. 10,230.00

12 Bentonite Kg. 35.00

13 Electric detonators @ 1 detonator for 1/2 preparing epoxy mortar 100 Nos. 1,000.00

14 Epoxy Compound with accessories for preparing epoxy mortar Kg. 550.00

15 Epoxy primer . Kg. 550.00

16 Gelatine 80% Kg. 90.00

17 Geo grids Sq.Mt. 270.00

18 Geomembrance Sq.Mt. 510.00

19 Geonets Sq.Mt. 190.00

20 Geotextiles Sq.Mt. 90.00

21 Geotextiles filter fabric Sq.Mt. 90.00

22 G.I. Bolt 10 mm dia No. 12.00

23 Grouting pump with agitator Hour 70.00

24 Helical pipes 600 mm diameter R.Mt. 1,420.00

25 Joint Sealant compound. Kg. 105.00

26 M.S. Shoes @ 35 Kg per pile of 15 M Kg. 48.00

27 Modular strip / box seal expansion joints including anchorage catering to horizontal movements beyond 70 mm and upto 140 mm assembly comprising of edge beams, centria beam, 2 modules chloroprene seal, anchorage elements, support and control system, all steel sections protected against corrosion and installed by the manufacturer or his authorised representative.

R.Mt. 99,000.00

28 Modular strip / box seal expansion joints including anchorage catering to horizontal movements beyond 40 mm and upto 210 mm box / box seal joint assembly containing 3 module / cells and comprising of edge beams, two central beams, chloroprene seal, anchorage elements, support and control system, all steel sections protected against corrosion and installed by the manufacturer or his authorised representative.

R.Mt. 191,360.00

29 Nipples 12 mm diameter and 50.9" long No. 36.00

30 Strip seal expansion joint R.Mt. 7,475.00