LOTUSHAMMERS.COM

KAMAL IMPORT EXPORTS INC.NASHIK | MH | IND

ApplicationMining & Quarry | Water well | Formation Sampling

Construction | Environmental | Geothermal

DTH Hammers& Button Bits

Technical Brochure

Pipes and RockDrillsManufacturing Co.

www.lotuspipesandrockdrills.com

FAST. VERSATILE. TOUGH.

5 Inch

Hammer Model Shank Type Top Connec�on Threads

Lotus – FDD_35 DHD 350 2 3/8" API

Lotus MAX_L500V DHD 350 2 3/8" API

6 Inch

Hammer Model Shank Type Top Connec�on Threads

Lotus – FF 6 FF 6 3 1/2” API REG PIN

Lotus – MAX_L 600 QL 60 3 1/2” API REG PIN

Lotus – FD_6 Sandvik SD 6 3 1/2” API REG PIN

Lotus - FDD_36 DHD 360 3 1/2” API REG PIN

Lotus FDD36V DHD 360 3 1/2” API REG PIN

Lotus – FF_C 64 Atlas Copco COP 64 3 1/2” API REG PIN

8 Inch

Hammer Model Shank Type Top Connec�on Threads

Lotus FD 8 Sandvik SD 8 4 1/2” API REG PIN

Lotus FDD 38 DHD 380 4 1/2” API REG PIN

Lotus FDD 38V DHD 380 4 1/2” API REG PIN

10 Inch

Hammer Model Shank Type Top Connec�on Threads

Lotus – FF 10 Lotus FF 10 6 5/8” API REG PIN

Lotus – FD 10 Sandvik - SD 10 6 5/8” API REG PIN

Lotus Hammer Range

3 Inch

Hammer Model Shank Type Top Connec�on Threads

Lotus BR 3 Lotus FF 4 / Mach 44 2 3/8” API

3.5 Inch

Hammer Model Shank Type Top Connec�on Threads

Lotus FDD 350 DHD 3.5 2 3/8" API

Lotus FFTD 350 DHD 35 2 3/8" API

4 Inch

Hammer Model Shank Type Top Connec�on Threads

Lotus – MAX_L 400 QL 40 2 3/8" API

Lotus – FF 4 Lotus FF 4 / Mach 44 2 3/8" API

Lotus FF4 Lotus FF 4 / Mach 44 2 3/8" API

Lotus – FDD 34 DHD 340 2 3/8" API

Lotus – FD 4 Hammer Sandvik SD 4 2 3/8" API

Lotus – FF_C 44Atlas Copco COP 44 Hammers

2 3/8" API

3 Inch

HAMMER MODEL

HAMMER LENGTH W/O BIT (MM)

HAMMER OUTSIDE DIA (MM)

HAMMER WEIGHT (KG)

CYLINDER BORE (MM)

PISTON STROKE (MM)

PISTON WEIGHT (KG)

HOLE SIZES (MM)

WRENCH SIZE A/F (MM)

SUITABLE SHANK

BR3 769.0 78.0 24.0 50.8 82.0 (approx.) 2.80 85-95

A/F 57.0 / W-50.0 BR3

SUITABLE BUTTON BITS FOR BR3: Flat face (Optional - Concave Face)

Dia - 4” ( 102 mm) , Dia - 4 ½” ( 115 mm)

Dia - 5” ( 127 mm), Dia - 6” ( 152 mm)

Dia - 6 ½” ( 165 mm)

3.5 Inch

HAMMER MODEL

HAMMER LENGTH W/O BIT (MM)

HAMMER OUTSIDE DIA (MM)

HAMMER WEIGHT (KG)

CYLINDER BORE (MM)

PISTON STROKE (MM)

PISTON WEIGHT (KG)

HOLE SIZES (MM)

WRENCH SIZE A/F (MM)

SUITABLE SHANK

FDD 350 776.3 78.0 21.0 63.0 80.0 4.0 90-115 A/F 57.0 / W-40.0 DHD 350

SUITABLE BUTTON BITS FOR FDD 350: Flat face (Optional - Concave Face)

Dia - 3 1/2"(89 mm)

Dia - 4"(102 mm)

4 Inch

HAMMER MODEL

HAMMER LENGTH W/O BIT (MM)

HAMMER OUTSIDE DIA (MM)

HAMMER WEIGHT (KG)

CYLINDER BORE (MM)

PISTON STROKE (MM)

PISTON WEIGHT (KG)

HOLE SIZES (MM)

WRENCH SIZE A/F (MM)

SUITABLE SHANK

FF 4 988.3 98.5 42.0 77.6 85.0 (approx) 7.40 120-125

A/F 65.5 / W-50.0

Mission 4 (M40)

FDD 34 950.9 100.0 38.0 82.0

80.0 (approx) 8.8 115-140

A/F 61.5 / W-40.0

DHD340 WITHOUT FOOT VALVE

SUITABLE BUTTON BITS FOR MAX_L 400: Flat Face (Optional- Concave Face) Dia - 4 ½” ( 115 mm), Dia - 5” ( 127 mm)

Dia - 6” ( 152 mm)

SUITABLE BUTTON BITS FOR FF 4: Flat face (Optional - Concave Face)

Dia - 4” ( 102 mm) , Dia - 4 ½” ( 115 mm)

Dia - 5” ( 127 mm), Dia - 6” ( 152 mm)

Dia - 6 ½” ( 165 mm)

SUITABLE BUTTON BITS FOR FDD 34: Flat face (Optional - Concave Face)

Dia - 4” ( 102 mm), Dia - 4 ½” ( 115 mm)

Dia - 5” ( 127 mm), Dia - 6” ( 152 mm)

Dia - 6 ½” ( 165 mm)

SUITABLE BUTTON BITS FOR FD 4: Flat face (Optional - Concave Face)

Dia - 4” ( 102 mm), Dia - 4 ½” ( 115 mm)

Dia - 5” ( 127 mm), Dia - 6” ( 152 mm)

Dia - 6 ½” ( 165 mm)

Note: Besides the above mentioned models, we can also customize hammers and bits to your needs.

Recommended Applications

Mining & QuarryWater wells

Formation Sampling

Reliable and Heavy Duty Hammers Built with the Latest TechnologySuitable with all International Shank types

5 Inch

HAMMER MODEL

HAMMER LENGTH W/O BIT (MM)

HAMMER OUTSIDE DIA (MM)

HAMMER WEIGHT (KG)

CYLINDER BORE (MM)

PISTON STROKE (MM)

PISTON WEIGHT (KG)

HOLE SIZES (MM)

WRENCH SIZE A/F (MM)

SUITABLE SHANK

FDD_35V 1053.4 117.0 58.0 88.0 80.0 APPROX 11.5 127-152

A/F 95.0 / W-50.0

DHD340 WITH FOOT VALVE

MAX_L500V 994.1 124.0 70.0 99.80 80.0 APPROX 15.0 140-165

A/F 90.0 / W-50.0

QL50 WITH FOOT VALVE

SUITABLE BUTTON BITS FOR FDD_35V: Flat face (Optional - Concave Face) Dia - 5” ( 127 mm) , Dia - 6” ( 152 mm) Dia -6 1/2” ( 165 mm)

SUITABLE BUTTON BITS FOR MAX_L500V: Flat face (Optional - Concave Face)

Dia - 4” ( 102 mm) , Dia - 4 ½” ( 115 mm)

Dia - 5” ( 127 mm), Dia - 6” ( 152 mm)

Dia - 6 ½” ( 165 mm)

6 Inch

HAMMER MODEL

HAMMER LENGTH W/O BIT (MM)

HAMMER OUTSIDE DIA (MM)

HAMMER WEIGHT (KG)

CYLINDER BORE (MM)

PISTON STROKE (MM)

PISTON WEIGHT (KG)

HOLE SIZES (MM)

WRENCH SIZE A/F (MM)

SUITABLE SHANK

FF 6 931.0 148.0 95.0 120.5 90.0 (approx.) 18.8 165-203

A/F 90.0 /W-40.0 FF6

MAX_L 600 1035.0 144.0 100.0 115.8 80.0 APPROX 20.0 156-178

A/F 100 / W-50.0

QL50 WITH FOOT VALVE

FD_6 931.0 148.0 95.0 90.0 (APPROX.) 18.8 165-203 90-115

A/F 90.0 /W-40.0 SD6

FDD_36 1104.6 137.0 91.0 112.3 90.0 APPROX 22.20 152-178

A/F 90.0 / W-40.0

DHD360 WITHOUT FOOT VALVE

FDD36V 1137.0 144.0 97.2 114.0

80.0 (approx.) 23.2 155-178

A/F 100.50 / W-68.5

DHD360 (With foot valve)

SUITABLE BUTTON BITS FOR FF 6: Flat face(Optional - Concave Face)

Dia - 6” ( 152 mm)* , Dia - 6 ½” ( 165 mm)

Dia - 7” ( 152 mm)*, Dia - 7 ½” ( 165 mm)

Dia - 8” ( 203 mm) *, Dia - 8 ½” ( 216 mm)

SUITABLE BUTTON BITS FOR MAX_L 600: Flat face(Optional - Concave Face)

Dia - 6” ( 152 mm) , Dia - 6 ½” ( 165 mm)

Dia - 7” ( 152 mm), Dia - 7 ½” ( 165 mm)

Dia - 8” ( 203 mm), Dia - 8 ½” ( 216 mm)

SUITABLE BUTTON BITS FOR FD_6: Flat face(Optional - Concave Face)

Dia - 6” ( 152 mm)* , Dia - 6 ½” ( 165 mm)

Dia - 8 ½” ( 216 mm), Dia - 10” (254 mm) O B

SUITABLE BUTTON BITS FOR FDD_36: Flat face(Optional - Concave Face)

Dia - 6” ( 152 mm)*, Dia - 6 ½” ( 165 mm)

Dia - 8 ½” ( 216 mm), Dia - 10” (254 mm) O B

SUITABLE BUTTON BITS FOR FDD36V: Flat face(Optional - Concave Face)

Dia - 6” ( 152 mm)*, Dia - 6 ½” ( 165 mm)

Dia - 8 ½” ( 216 mm), Dia - 10” (254 mm) O B

8 Inch

HAMMER MODEL

HAMMER LENGTH W/O BIT (MM)

HAMMER OUTSIDE DIA (MM)

HAMMER WEIGHT (KG)

CYLINDER BORE (MM)

PISTON STROKE (MM)

PISTON WEIGHT (KG)

HOLE SIZES (MM)

WRENCH SIZE A/F (MM)

SUITABLE SHANK

FD 8 1122.3 137.0 91.0 112.3 90.0 APPROX 21.3 152-178

A/F 90.0 / W-40.0

SD6 WITHOUT FOOT VALVE

FDD 38 1166.6 175.0 153.0 147.0 90.0 APPROX 41.0 200-254

A/F 115 / W-42.0

DHD380 WITHOUT FOOT VALVE

FDD 38V 1251.0 182.0 181.0 145.0

70.0 (approx.) 50.0

200 – 305

A/F 155.50 / W-68.60

DHD380 (With foot valve)

SUITABLE BUTTON BITS FOR FD 8: Flat face(Optional - Concave Face)

Dia - 8” ( 203 mm)* , Dia - 8 ½” ( 216 mm)

Dia - 9” ( 229 mm)*, Dia - 10” ( 254 mm)

Dia - 10 ½” ( 280 mm)

SUITABLE BUTTON BITS FOR FDD 38: Flat face(Optional - Concave Face)

Dia - 8” ( 203 mm)*, Dia - 8 ½” ( 216 mm)

Dia - 9” ( 229 mm)*, Dia - 10” ( 254 mm)

Dia - 10 ½” ( 280 mm)

SUITABLE BUTTON BITS FDD 38V: Flat face(Optional - Concave Face)

Dia - 8” ( 203 mm)*, Dia - 8 ½” ( 216 mm)

Dia - 9” ( 229 mm)*, Dia - 10” ( 254 mm)

Dia - 10 ½” ( 280 mm)

For technical details visit www.lotuspipesandrockdrills.com

Our Other Products

Lotus Pipes and RockDrills Manufacturing Co.

Corporate Ofce: Lotus House, Plot no. 21, Behind Hotel Sai Palace, Mumbai-Agra Highway, Chetna Nagar, Nashik, Maharashtra, India.

Factory: Lotus Enclave, Gat. No. 435-36 Gonde Industrial Area, Nasik-MumbaiAgra Road, Gonde Village, Taluka: Igatpuri, Dist: Nasik, Maharashtra, India

Phone: +91 0253 2375703 | Fax: +91 0253 2375704

Email: info@kamalimpex.com, raj.varma@kamalimpex.com

Website: www.lotushammers.com

(A Division of Kamal Import Exports Inc.)

Lotus Pipes & RockDrills USA Ltd.(U.S Based Subsidiary)

Address - 1700 East 13th Street, Cleveland, Ohio - 44114

Phone - 1 (216) 855 4119

Email - aakash@lotuspipesandrockdrills.com

Website: www.lotuspipesandrockdrills.com

www.lotuspipesandrockdrills.com

Tricone BitsPVC Environmental Products