DTP SYSTEMS DTP T 3G-SDI 230 D The Extron DTP T 3G-SDI 230 D is a single-gang decorator-style transmitter for sending 3G-SDI, HD-SDI, or SDI, audio, and bidirectional control signals up to 230 feet (70 meters) over a shielded CATx cable to Extron DTP ™ -enabled products. It seamlessly integrates broadcast-type video signals into DTP Systems, and is designed for efficient use within configurable rooms and environments. The transmitter features a convenient one-gang form factor that offers maximum placement flexibility. DTP TRANSMITTER FOR 3G-SDI - DECORATOR-STYLE WALLPLATE A Transmits 3G-SDI, HD-SDI, or SDI plus control and analog audio up to 230 feet (70 meters) over a shielded CATx cable A Accepts 3G-SDI/HD-SDI/SDI signals up to 2.97 Gbps A Buffered 3G-SDI/HD-SDI/SDI input loop-through A Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal perormance A Input equalization and reclocking on buffered loop-through A Accepts additional analog stereo audio signals A Embedded SDI audio support A Bidirectional RS-232 and IR pass- through for AV device control A Remote power capability A Immunity to pathological signal patterns A Compatible with all DTP 230 Series receivers and DTP-enabled products A Mounts in an included single-gang decorator-style wallplate A Highly reliable, energy-efficient external universal power supply included
Transcript
DTP SYSTEMS
DTP T 3G-SDI 230 D
The Extron DTP T 3G-SDI 230 D is a single-gang decorator-style
transmitter for sending 3G-SDI, HD-SDI, or SDI, audio, and bidirectional
control signals up to 230 feet (70 meters) over a shielded CATx cable to
Extron DTP™-enabled products. It seamlessly integrates broadcast-type
video signals into DTP Systems, and is designed for efficient use within
configurable rooms and environments. The transmitter features a convenient
one-gang form factor that offers maximum placement flexibility.
DTP TRANSMITTER FOR 3G-SDI - DECORATOR-STYLE WALLPLATE
A Transmits 3G-SDI, HD-SDI, or SDI plus control and analog audio up to 230 feet (70 meters) over a shielded CATx cable
A Accepts 3G-SDI/HD-SDI/SDI signals up to 2.97 Gbps
A Buffered 3G-SDI/HD-SDI/SDI input loop-through
A Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal perormance
A Input equalization and reclocking on buffered loop-through
A Accepts additional analog stereo audio signals
A Embedded SDI audio support
A Bidirectional RS-232 and IR pass-through for AV device control
A Remote power capability
A Immunity to pathological signal patterns
A Compatible with all DTP 230 Series receivers and DTP-enabled products
A Mounts in an included single-gang decorator-style wallplate
A Highly reliable, energy-efficient external universal power supply included
SPECIFICATIONSDESCRIPTION
For complete specifications, please go to www.extron.comSpecifications are subject to change without notice.
Number/signal type 1 single link SDI, HD-SDI, or 3G-SDI digital component video
Connectors 1 female BNCEqualization Automatic, up to 300' (100 m) for 3G-SDI
AUDIO INPUT
Number/signal type 1 stereo, unbalancedNOTE: Analog audio is not embedded onto the digital video signal. Analog audio and digital embedded audio are transmitted simultaneously and output on the receiver on two different connectors.Connectors 1 female, 3.5mm, stereo jack, 2 channel; tip (L), ring (R),
sleeve (Gnd)
AUDIO OUTPUT
Signal type DTP 230Connector 1 female RJ-45
INTERCONNECTION BETWEEN TRANSMITTER AND RECEIVER
Connectors 1 female RJ-45 per unit for 1 cable connecting the transmitter and receiver
DTP signalSignal transmission distance Up to 230' (70 m) using shielded twisted pair (STP) cable
or XTP DTP 24 cableCable requirements Solid conductor, 24 AWG or betterCable recommendations 400 MHz bandwidth STP cableNOTE: Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance.
COMMUNICATIONS — EXTERNAL DEVICE (RS-232/IR OVER TP)
Serial control port Bidirectional RS-232 control via (1) 3.5 mm, 5-pole captive screw connector (connector is shared with IR control port)
IR control port Bidirectional IR control via (1) 3.5 mm, captive screw connector, 5-pole (connector is shared with RS-232 control port) TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 60 kHz
USB control port 1 front panel female mini USB BUSB standards USB 2.0, low speedProgram control Extron Simple Instruction Set (SIS™)
GENERAL
Power supply External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1 A, 12 watts
NOTE: Each transmitter or receiver can be powered either locally by an external power supply or remotely by receiver or transmitter on the other end of the twisted pair cable.MountingFurniture or wall mount Yes, with a 1 gang wall box or mud ringRegulatory complianceSafety c-UL, ULEMI/EMC AN/NZS, CE**, C-tick, FCC Class A**, ICESNOTE: **CE and FCC testing is conducted with STP cable.
Model Version Description Part numberDTP T 3G-SDI 230 D 3G-SDI Decorator-Style Tx, Black - 230 feet (70 m) 60-1479-12DTP T 3G-SDI 230 D 3G-SDI Decorator-Style Tx, White - 230 feet (70 m) 60-1479-13
WORLDWIDE SALES OFFICES
www.extron.com
Anaheim • Rale igh • S i l icon Val ley • Dal las • New York • Washington, DC • Toronto • Mexico City • Par is • London • Frank fur t
Madr id • Stockholm • Amersfoor t • Moscow • Duba i • Johannesburg • Te l Av iv • Sydney • Melbourne
New Delh i • Banga lore • S ingapore • Seou l • Shangha i • Be i j ing • Hong Kong • Tok yo
ExtronTLP Pro 1220TG12" Tabletop TouchLink Pro Touchpanel
Extron Control App
TCP/IPNetwork
Extron DTP R DP 4K 330Receiver
ProjectorScreen Control
Ethernet/PoE
Power Injector
The Extron DTP T 3G-SDI 230 D is a single-gang decorator-style transmitter for sending 3G-SDI, HD-SDI, or SDI, audio, and bidirectional RS-232 and IR signals up to 230 feet (70 meters) over a shielded CATx cable to Extron DTP-enabled products. It provides seamless integration of broadcast-type video signals into DTP Systems, supporting video rates up to 2.97 Gbps. The transmitter accepts analog stereo audio signals for simultaneous transmission over the same shielded twisted pair cable. Integrator-friendly features include an input loop-through, remote power capability, and bidirectional RS-232 and IR pass-through for remote AV device control. The space-efficient, wall-mountable design of the DTP T 3G-SDI 230 D provides the convenience of placing input connections precisely where they are needed.
To enhance and simplify integration, the DTP T 3G-SDI 230 D offers automatic input equalization and reclocking on the SDI loop-through. For increased system design flexibility, it can transmit a selected pair of AES audio channels as embedded digital audio, or send analog stereo audio alongside the video and control signals. The transmitter features built-in signal conversion for full compatibility with all DTP 230 Series receivers and DTP-enabled products. It can be integrated with an Extron DTP CrossPoint® presentation matrix switcher to support sources at remote locations. It is ideal for interfacing broadcast-type sources, such as PTZ cameras, with professional or consumer-level equipment in a wide range of environments.
