THURSDAY, JUNE 21 AT 9:00 A.M. (EDT)
9804�Reisterstown�Road,�Owings�Mills,�Maryland�21117,�USA(Baltimore�Area)
DUE�TO�PLANT�CLOSURE
OVER 1,500 LOTS INCLUDINGCNC MACHINE TOOLS &HUGE QUANTITY OF TOOLING
LIVE & WEBCAST
ASC CORPORATION
FOR�ADDITIONAL�INFORMATION�CONTACT�SUSIE�SPRINGER�(410)�654-7500,�EXT.�234�OR�E-MAIL�[email protected]
(800) 722-3334http://www.goindustry.com
email: [email protected] AMERICAN OFFICES:
ARIZONA, MARYLAND, MICHIGAN, NEW YORK, ILLINOIS, FLORIDA,
CONNECTICUT, NEBRASKA, WASHINGTON, ONTARIO
ADDITIONAL OFFICES WORLDWIDE
Bid Live Online atwww.goindustry.com
OKUMA IMPACT LU35-2SC SLANT BED CNC TURNING CENTER, S/N 206
MATSUURA MDL. MC1000VS CNC 4-AXIS VERTICAL MACHINING CENTER, S/N 82042813
OKAMOTO-LINE HMC 3000 CNC 5-AXIS HORIZONTAL MACHINING CENTER, S/N 33MC
NEW 1987
MORI SEIKI MH80 CNC HORIZONTAL 5-AXIS MACHINING CENTER, S/N 71
NEW 1986
NEW 1998
NEW 1982
2� 3
MORI SEIKI MV JUNIOR CNC VERTICAL MACHINING CENTER, S/N 927
MATSUURA MDL. MC500V25 CNC 4-AXIS VERTICAL MACHINING CENTER, S/N 82082829
MATSUURA MDL. MC600 H-45 CNC 4-AXIS DUAL PALLET VERTICAL MACHINING CENTER, S/N 84023922
CNC�MACHINING�CENTERSOKAMOTO-LINE�Model�Online�HMC�3000�CNC�5-Axis�Horizontal�Machining�Center, 40-Position ATC, Auto. Oil Temperature Reg., Hydraulic Unit, 5" Spindle, Coolant, 39" x 118" Table, Way Covers, Fanuc 11 M CNC-CRT Controls, Tape Unit RS232 Port, 50 Taper, Spindle Speeds: 20 to 4,000 RPM, Max. Table Load 10,000 Lbs., Renishaw No. 17 Machine Interface, Ishowa Lube, Travels: X=120", Y=60", Z=30", Top of Table to Center Line of Spindle 6.1" to 66.1", Spindle Nose to Center Line of Table 7.64" to 30", Top of Table to Floor 30.7", Drive Motor 30 HP, S/N 33MC, 1987
MORI�SEIKI�Model�MH80�CNC�5-Axis�Horizontal�Machining�Center, Dual 31-1/2" Shuttle-Type Tables, Fanuc No. 11 MA CNC-CRT Controls, RS232 Port, Lube, Tokyo Keiki Oil Unit, 80-Position ATC, #50 Taper, Chip Conveyor, Table Indexing Angle 1°, Max. Table Load 1,500 kg, Travels: X=43.3", Y=31.5", Z=31.5", Spindle Speeds 10–3,600 RPM, Spindle Motor 15 kW, Spindle Dia. 3.9", S/N 71, 1986
MORI�SEIKI�Model�MV�Junior�CNC�Vertical�Machining�Center, 30-Position ATC, RS232 Port, Lube, 16 x 35 Table, Coolant, Automatic Oil Temperature Reg., Yasnac MX2 CNC-CRT Controls, BT 40 Taper, 3-Axis, Travels: X=22", Y=16", Z=18", 6,000 RPM Spindle, S/N 1027, 1986
MORI�SEIKI�Model�MV�45/40�CNC�Vertical�Machining�Center, 30-Position ATC, Cooler, 18 x 47 Table, Lube, 10,000 RPM Spindle, Fanuc 15MA CNC-CRT Controls, RS232 Port, Travels: X=31.5", Y=18.11", Z=20.08", No. 40 Taper, S/N 1332, 1993
MORI�SEIKI�Model�MV�Junior�CNC�Vertical�Machining�Center, 16-Position ATC, RS232 Port, Lube, 16 x 35 Table, Coolant, Yasnac MX2 CNC-CRT Controls, 3-Axis, BT 40 Taper, Travels: X=22", Y=16", Z=18", 6,000 RPM Spindle, S/N 927, 1986
MATSUURA�Model�MC500V25�CNC�4-Axis�Vertical�Machining�Center, Automatic Oil Temperature Reg., Lube, 20-Position ATC, 15 x 34 Table, Yasnac MX5 CNC-CRT Controls, RS232 Port, Coolant, BT 35 Taper, Travels: X=510mm, Y=330mm, Z=460mm, Spindle Speeds 120–4,000 RPM, S/N 82082829, 1982
MATSUURA�Model�MC1000VS�CNC�4-Axis�Vertical�Machining�Center, 25-Position ATC, Automatic Oil Temperature Reg., 19 x 47 Table, Chip Conveyor, Yasnac MX5 CNC-CRT Controls, RS232 Port, Coolant, Way Covers, BT 40 Taper, Travels: X=40", Y=20", Z=20", Spindle Speeds 100–6,000 RPM, S/N 82042813, 1982
MATSUURA�Model�MC�600�H-45�CNC�4-Axis�Dual�Pallet�Horizontal�Machining�Center, Chip Conveyor, Fanuc 6MB CNC-CRT Controls, Daikin Oil Cooler, Hydraulic Unit, Pallet 18" x 18" Each, 50-Position ATC, Thru Spindle Coolant, No. 40 Taper, Spindle Speeds 30–6,000 RPM, Spindle Motor 15 HP, Travels: X-23.62", Y=17.71", Z=18.90", No. 40 Taper, S/N 84023922, 1984
MATSUURA�Model�MC2000V�CNC�Vertical�4-Axis�Machining�Center, Way Covers, 40-Position ATC, Fanuc 6MB CNC-CRT Controls, RS232 Port, Daikin Oil Cooler, 30 x 82 Table, Tailstock, 50 Taper, Travels: X=80.31", Y=30.7", Z=29.52", Spindle Speeds 20–3,600 RPM, Spindle Motor 15 kW, S/N 82022555, 1982
<MORI SEIKI MV JUNIOR CNC VERTICAL MACHINING CENTER, S/N 1027
NEW
1986
NEW
1986 NEW
1982
MORI SEIKI MV45/40 CNC VERTICAL MACHINING CENTER, S/N 1332
NEW 1993
NEW 1984
2� 3
CNC�MACHINING�CENTERS,�(continued)MATSUURA�Model�MC�800�V�CNC�3-Axis�Vertical�Machining�Center, Coolant, 30-Position ATC, Lube, Yasnac MX2 CNC-CRT Control, RS232 Port, Way Covers, 18" x 46" Table, BT 40 Taper, Travels: X=31.5", Y=18.1", Z=20", Spindle Speeds 25–4,500 RPM, Spindle Motor 7.5 HP, S/N 85065046, 1986
MATSUURA�Model�MC-500V-DC�Twin�Spindle�CNC�4-Axis�Vertical�Machining�Center, Coolant, RS232 Port, Tape Unit, Matsuura MX1 CNC-CRT Control, (2) 20-Position ATCs, 15 x 34 Table, BT 35 Taper, Travels: X=20", Y=14.1", Z=17.7", Spindle Speeds 60–6,000 RPM, S/N 84054006, 1984
CINCINNATI�Model�Milacron�10HC-2500-A�CNC�Horizontal�Machining�Center, 31 x 104 Table, 30-Position ATC, Hydraulic Unit, Way Covers, Acramatic MC CNC-CRT Controls, Greco CNC Mini-File, Travels: X=100", Y=40", Z=30", Spindle 10 HP, Spindle Speeds 20–4,000 RPM, S/N 48949
CINCINNATI�Model�DM-5H-2500�CNC�Horizontal�Boring�Machine, Hydraulic Unit, Way Covers, 4-Axis, 31 x 102 Table, Pendant Control, Acramatic 5 NC Controller w/Numeritronix Exec 1501 CNC-CRT Control, 85–3,800 RPM, 1-5/8" Spindle, Travels: X=100", Y=40", S/N 5513H5-74-5
CINCINNATI MILACRON MDL. 10HC-2500-A CNC HORIZONTAL MACHINING CENTER, S/N 48949
CINCINNATI MDL. DM-5H-2500 CNC HORIZONTAL BORING MACHINE, S/N 5513H5-74-5
MATSUURA MDL. MC800V CNC 3-AXIS VERTICAL MACHINING CENTER, S/N 85065046
NEW 1986
MATSUURA MDL. MC2000V CNC VERTICAL MACHINING CENTER, S/N 82022555
NEW 1982
MATSUURA MDL. MC-500V-DC TWIN SPINDLE CNC 4-AXIS VERTICAL MACHINING CENTER, S/N 84054006
NEW 1984
4� 5
CNC�TURNING�CENTEROKUMA�Model�LU35-2SC�Okuma�Impact�Slant�Bed�CNC�Turning�Center, (2) 10-Position Turrets, Tailstock, Kitagawa 12" 3-Jaw Chuck, Chip Conveyor, Okuma 0SP700L CNC Controls, Swing Over Bed 29.13", Length 59", (4) Controlled Axes, Swing Over Crosslide 18.90", Distance Between Centers 33.46", Max. Turning Diameter x Length 21.65" x 36.22", Spindle Diameter 5.12", Spindle Nose Type JIS A2-8, Thru Spindle Hole 3.54" Spindle Speeds 14–3,200 RPM, Spindle Motor 40/30 HP, Travels: X=Upper 10.83" + 4.13", Lower 7.09" + 2.76", Z=Upper 36.22", Lower 34.45", S/N 206, 1998
CNC�MILLSCINCINNATI�Model�2H100�Milacron�“Cintimatic"�4-Axis�CNC�Horizontal�Boring�Mill, ESD Retrofit R.M.F. 100" Horizontal Cintimatic, Way Covers, Hydraulic Unit, Acramatic 850 SX CNC-CRT (Full Control) Control, 31 x 102 Table, S/N 55131H55W0018RL92, 1992
CINCINNATI�Hydrotel�Triple-Spindle�Vertical�CNC�Milling�Machine, 16–1,600 RPM, 28' x 144" Table, Way Covers, M/N 30 x 120 Vertical Hydrotel, Coolant, Pendant Control, Acramatic NC CNC-CRT Controls, Greco CNC Mini-File, 24" Spindle C/L, 50 Taper, Travels: X=120", Y=30", Z=14", S/N 5H3V5T-2-AR-74
DeVLIEG�Model�JMC�4340�CNC�5-Axis�Mill, Way Covers, 48-Position ATC, 30" x 40" Table, Trabon Lube, DeVlieg NC Tapac 550 Controller, 4" Spindle, No. 50 Taper, Mist and Flood Coolant, Nickle-Plated Bedway Covers, Travels: X=40", Y=50", Z=16", W=16", 15 HP, Optional 2-5/8" Spindle, Taper 50CT, S/N 9742
JIG�BORERSMOORE�#B18�Jig�Borer, C-Tek 2-Axis DRO, 11 x 24 T-Slot Table, 0–2,500 RPM, S/N 1812, 1981
MOORE�Model�B18�Jig�Borer, 11 x 24 Table, Modified Vari-Speed Motor Drive System, 0–2,500 RPM, S/N B1714
(3)�MOORE�Model�3�Jig�Borers, 11 x 24 Table, 0–2,500 RPM, Power Feed Table, S/Ns B468, B363, & B826.
CNC�LATHESOKUMA�Model�LC30�CNC�Lathe, 3,000 RPM, RS232 Port, Daikin AK530 Oil Cooler, Lube, Chip Conveyor, Tailstock, 12" 3-Jaw Chuck, Okuma OSP5000L-G CNC Control, 12-Position Tool Turret, Swing Over Bed 500mm, Max. Turn Diameter 450mm, Spindle Speeds 15–3,000 RPM, Travels: X=230mm, Y=800mm, Z=520mm, 1985
HARDINGE�Model�ASM�Automatic�Second�Operation�Lathe, 3.6 HP, Lype Rollways Pneumatic Bar Feed, 6-Position Tool Turret, Dual Tool Posts, Coolant, S/N ASMC-525
HARDINGE�Model�HLV�Second�Operation�Lathe, 125–3,000 RPM, Tool Post, Tailstock, Dovetail Bed, Carriage Feed, Coolant, Collet Chuck
MORI�SEIKI�Model�LL-7B-2500�LL-7�CNC�Lathe, 4-Way Tool Post, Rear Boring Turret, Tailstock, Chip Conveyor, Coolant, Fanuc 6TB CNC-CRT Controls, RS232 Port, 32" Chuck, Lube, 8.5" Spindle Hole, Type B, Travel Size Swing Over Bed 39.3", Approximate Center Distance 96", Max. Cross Travel 21.6", Swing Over Crosslide 20.4", Spindle Speeds 8–750 RPM, Mail Motor 49 HP, S/N 151, 1981
CINCINNATI MILACRON 2H100 CINTIMATIC 4-AXIS CNC HORIZONTAL BORING MILL, S/N 55131H55W0018RL92
CINCINNATI HYDROTEL TRIPLE SPINDLE VERTICAL CNC MILL, S/N 5H3V5T-2-AR-74
DeVLIEG JMC4340 CNC 5-AXIS MILL, S/N 9742
OKUMA MDL. LC30 CNC LATHE MORI SEIKI MDL. LL-7B-2500 CNC LATHE, S/N 151
NEW
1981
RETROFIT
1992
NEW 1985
4� 5
INSPECTIONSIP�CNC�Coordinate�Measuring�Machine, Type No. SIP-CMM5, 30 x 33 T-Slot Table, Digital Microvax 3100 Computer, Digital LA324 Multiprinter, Hewlett-Packard 7550A Graphics Plotter, Dynapic Controller, Greco CNC Milifile System, SIP Probe, “Concerto” Software, Travels: X=27.95", Y=21.65", Z=21.65", Distance Between Uprights 36.22", Height Under Crossbeam 32.7", S/N 102, 1991
SHEFFIELD�CORDEX�Model�1820�CNC�Vertical�Arm�Coordinate�Measuring�Machine, G+C Remote Control Unit, Measurement Processor, 3-Axis DRO Computer, 3' x 6' Table, Renishaw PH9/MK2, Travels : X=78.7 ", Y=35.4/39.4", Z=15.8"/27.6"/39.4", Work Table Area 81.9" x 40.4", 1985
BENDIX�CORDAX�Model�1808�Vertical�Arm�Coordinate�Measuring�Machine, Bendix MP-3 Measurement Processor, 3-Axis DRO, Travels: X=29.5", Y=24.5", Z=19.7 " , Wo r k Ta b l e 31. 5 " x 2 6 . 6 " , S/N 2-4384-1083, 1983
BENDIX-CORDAX�Model� 1000�CNC�Coordinate�Measuring�Machine, 3-Axis DRO, Computer Controls, Renishaw PH 6 Probe, 19" x 30" Table, S/N 2-2621-0179; Optical Comparators; Vacuum Chambers; And Surface Plates.
Several�14"�Optical�Comparators.
EDMONA-ELTEE�Model�SN320�Sinker-Type�CNC�EDM�Machine, No. IN260, .057 KVA w/Poll-Spark CNC Control S/N 199/2871/8302, 3-Axis, Controller No. ONA S-2000/60 Acopto, Filter, 16" x 25.5" T-Slot Table, System Nol Filtro SN320, System 3R Tooling, 1982
ONA-ELTEE�Model�260�Sinker-Type�CNC�EDM�Machine, 0.57 KVA w/Poll-Spark CNC Control S/N 103-2595/8202, 3-Axis, Controller No. ONAPULS-60, Filter System Filtro I-260, 16" x 25.5" T-Slot Table, System 3R Tooling, S/N 2595/8202, 1982
GRINDERSTOYODA�Type�GUP32x100�Cylindrical�Grinder, Model RB7574, w/Drop Down Internal Grinding Head, 13" Diameter x 3/4" Gr. Wheel, 1,360–6,560 RPM, Coolant, Swivel Wheelhead, Swing Over Table 320mm, Max. Distance Between Centers 1,000mm, Max. Diameter to Be Ground 280mm, Spindle Speeds (Workhead) 16–250 RPM, S/N LG3270-2, 1984
THOMPSON�Hydraulic�Surface�Grinder, Walker 8 x 24 Electro-Magnetic Chuck
THOMPSON�Surface�Grinder, 8 x 24 Permanent Magnetic Chuck
THOMPSON�Surface�Grinder, 6 x 18 Permanent Magnetic Chuck
BROWN�&�SHARPE�No.�2�Surface�Grinder, 6" x 18"
BROWN�&�SHARPE�No.�618�Micromaster�Sur face� Gr inder, 6 x 18 Pe rm a ne nt Magnetic Chuck
BROWN�&�SHARPE�No.� 1�Universal�Cylindrical�Grinder
BLANCHARD�No.�22K-42�Rotary�Surface�Grinder, 42" Magnet, 22" Segmented Wheel
(2)�CINCINNATI�Model�2�Tool�and�Cutter�Grinders
JONES� &� LAMSON� Mode l � TG636�Universal�Automatic�Thread�Grinder
EX-CELL-O�Model�74-A�Vertical�Precision�Center�Lapping�Machine
SIP CNC COORDINATE MEASURING MACHINE, S/N 102
SHEFFIELD CORDAX NO. 1820 CNC VERTICAL ARM COORDINATE MEASURING MACHINE
ONA-ELTEE SN320 SINKER-TYPE CNC EDM, S/N 2871-8302
BENDIX CORDAX NO. 1808 VERTICAL ARM COORDINATE MEASURING MACHINE, S/N 2-4384-1083
TOYODA GUP32X100 CYLINDRICAL GRINDER, S/N LG3270-2
BLANCHARD NO. 22K-42 ROTARY SURFACE GRINDER, S/N 12445
1985 1983
1991
1983
1984
CHUCKERSHARDINGE� Mode l � HNC� NC�Chucker, 2.5 HP, w/GE Mark Century 550 NC Controls, GE U-Store Memory System, S/N HNC-151(3)�HARDINGE�Model�HC�Chucker, 1.5 HP, 125–3,000 RPM, Carriage Feed, Threading Attachment, Collet Chuck, 8-Position Tool Turret, Coolant, Dial Gauge, S/N’s HC-229A, HC-1753-F, HC-1753-EWARNER � & � SWASEY � Au to .�Chucker, Model M-3830 0-AC, Lot 13, 58–2,507 RPM, S/N 1981076
MILLS(27)�BRIDGEPORT�2�HP, 1-1/2�HP�and�1�HP�Vertical�Mills
C INCINNATI� Model � J#83093�Vertical�Mill
C INC INNATI � “ Ve r s i p owe r ”�Horizontal�Mill, w/Universal Vertical Head, 25 x 116 Table
CINCINNATI� “Hypowermatic”�Horizontal�Mill
K E A R N E Y � & � T R E C K E R�M I LWAU K E E � M o d e l � 6 2 5T F�Horizontal�Mill, 19 x 107 Table
LATHESHARDINGE�Model�HLV-H�High-Speed�Super�Precision�Tool�Room�Lathe
HARDINGE�Model�VBS�Second�Operation�Lathe
(2)�HARDINGE�Model�DSM-59�Second�Operation�Lathes
AMERICAN�PACEMAKER�Engine�Lathe, 36" x 96", Steady Rest
DoALL�17"�x�60"�Engine�Lathe
(3)�MONARCH�Engine�Lathes
MONARCH�32"�NN�Heavy�Duty�Engine�Lathe, 24" 4-Jaw, Steady Rest, 40" x 156" Cap.
(2)�PRATT�&�WHITNEY�Model�C�Engine�Lathes
SOUTH� BEND� A� 9 "� Precis ion�Lathe
SHEARSCINCINNATI�Model�1812�Power�Squaring� Shear, 12' Wide x 1/4" Capacity, 105.6 Squaring Arm, Front Oper. Back Gage, S/N 30881
PEXTO�Model�12U4D�4'�Power�Shear
6� 7
CINCINNATI VERSIPOWER HORIZONTAL MILL, S/N 9J72H5R1
ASSORTED BRIDGEPORT VERTICAL MILLS
MONARCH ENGINE LATHE, S/N 39091 (2) CINCINNATI HYPOWERMATIC HORIZONTAL MILLS
AMERICAN PACEMAKER ENGINE LATHE, S/N 70758-48
MONARCH 32" NN ENGINE LATHE, 40" x 156" CINCINNATI 1812 POWER SQUARING SHEAR, S/N 30881
CINCINNATI 14' PRESS BRAKE
27 AVAILABLE
HARDINGE MDL. HCN NC CHUCKER, S/N HNC-151
6� 7
FILTER I HYDROTRON HWF-5-50-10 DUST COLLECTOR, S/N 05-300-24-292
DoALL C-1216A AUTOMATIC HORIZONTAL BAND SAW, S/N 373-81650
DoALL MP20 20" VERTICAL CONTOUR BAND SAW, S/N 32-53714
MILLER SYNCROWAVE 300 AC/DC ARC WELDERBENCH VISES
TOOL HOLDERS
TOOL HOLDERS
�PRESS�BRAKESCINCINNATI�14'�Overall�Mechanical�Press�Brake, 175-Ton, S/N 31493
5'�x�8'�x�7"�Thick�Steel�Layout�Table, w/T-Slots
HUGE�QUANTITIES�OF�PROGRAMMABLE�ROTARY�TABLES,�TOMBSTONES,�
SET-UP�PLATES�&�RECTANGULAR�BLOCKS
BRIDGE�CRANES/�JIBS/HOISTS
ABELL-HOWE�3-Ton�Bridge�Crane, Bottom Running, Approx. 22' Wide, Approx. 30' Travel, w/Coffing 1-Ton Elec. Chain Hoist, and Pendant Control, S/N 83-17863, 1983
Gantry�Crane, 20' Wide x 10' High, 1/2 Ton Capacity, w/Ingersoll-Rand 1/2 Ton Pneumatic Chain Hoist
(11)�ABELL-�HOWE�1-�to�3-Ton�Pole�Mounted�Jibs
DRILLSMORRIS�“Mor-Speed”�Radial�Drill, 150–3,000 RPM, 9" Col. x 4' Arm, Rotating 360° Tilting Box Table, S/N G1629
NATCO�24�Spindle�Drill, S/N F1B-262
TUBE�BENDERCONRAC-LEONARD�Synchrobend�5/8"�Manual�Tube�Bender
HONEEXTRUDE�77C�Hone, Vertical, Hydraulic, 6" Diameter Cylinder, Media and Cycle Counters, Clamp Force 7 Ton, 300–1,500 PSI, Dist. Bet. Columns 13", Max. Opening 9", 5 HP Motor, S/N M84-0408, 1983
MATERIAL�HANDLINGHYSTER�E60-XM-33�Electric�Riding�Forklift, 4,250 Lb. Capacity, 4 Stage Mast, 240" Max. Lift, 48" Forks, 36 Volt, Headlights, Cushion Tires, Rear Light, Side Shift, Late Model, S/N F108V17316W, 1999
HYSTER�E60-XM-33�Electric�Riding�Forklift, 4,250 Lb. Capacity
PLANT�SUPPORTAIRTEK�408Q�Aircooled�Aftercooler, S/N 500-F90-496
AIRTEK�AR300�Refrigerated�Air�Dryer, 200 Max. PSI, 320 SCFM, S/N 90-5205C, 1990
FILTER/HYDROTRON�HWF5-50-10�Dust�Collection�System, 10 HP, 5,000 CFM, S/N 05-300-24-292
( 2 ) � QU INCY� Tank � Mounted � A i r�Compressors, 15 HP Each
QUINCY�Tank�Mounted�Air�Compressor, 5 HP
MISCELLANEOUSBand�Saws;�Welders;�Keyseaters;�Ultrasonic�Cleaners;�Parts�Washers;�Polishers;�Spray�Booth;�Ovens;�Pumps;�Storage�Racks
OVER�(500)�LOTS�OF�PERISHABLE�TOOLING�&�TOOL�
HOLDERS,�HAND�TOOLS
VEHICLESCHEVROLET�G30�Van, 184,181 Miles, 1995
SUBARU�Outback�Legacy�AWD�Station�Wagon, 163,136 Miles
OFFICE�FURNITURE�&�EQUIPMENT
Assorted�Office�Furniture�and � Equ ipment , D e s k s , Chairs, File Cabinets, Safe File, Tables, Bookcases, Calcomp #1043 Color Plotter, Assorted C o m p u t e r s , C o n f e r e n c e Ta b l e , I s o t e c Te l e p h o n e S y s t e m , C a n o n H 12 2 5 0 FaxPhone L80, Xerox 2510 Blueprint Copier, Savid 9122 DL Copier w/Auto Feed
2005
1981
OVER 1,500 LOTS INCLUDING CNC MACHINE TOOLS & HUGE QUANTITY OF TOOLING
DUE�TO�PLANT�CLOSURE
TERMS�OF�SALENO�WARRANTIES:�Every item and lot in the “Auction” is sold: (a) “AS IS, WHERE IS AND WITHOUT RECOURSE,” and (b) with no warranties, guarantees or representation of any kind or variety, whether expressed, implied or otherwise.Some items subject to prior sale and removal.PAYMENT:�May be made by cash, certified funds or company check with a confirming letter of guarantee from an acceptable issuing bank. SAMPLE BANK LETTER: This bank guarantees payment to GoIndustry from (name of customer) on account # up to the amount of $ . This letter is valid for purchases at the ASC Corporation Sale, Thursday, June 21, 2007.America Express, Visa, and MasterCard will be accepted for this sale.BUYERS�PREMIUM:�A buyer’s premium of 12.5% will be added to the bid price for each lot if paying by cash, certified funds, or company check with a confirming letter of guarantee from an acceptable issuing bank. A buyer’s premium of 15% will be added to the bid price for each lot if paying by credit card. An additional 2.5% is charged on all lots purchased via the GoWebcast Facility and is added to the final sale price.For complete Terms of Sale, visit our website at www.goindustry.com
INSPECTIONWednesday, June 20, from 10:00 A.M. to 4:00 P.M. (EDT)
REMOVALAll small items must be removed by Friday, June 29, 2007 and all large items must be removed by Friday, July 13, 2007.
CONTACT�INFORMATIONFor further information, contact Susie Springer (410) 654-7500, ext. 234 or e-mail [email protected]
AIRPORT/AIRLINE�INFORMATIONBWI Airport
This�Sale�will�be�a�“Webcast”�auction,�which�enables�you�to�bid�securely�in�real-time�from�the�comfort�of�your�own�computer.�To�utilize�this�service,�register�with�GoIndustry�at�www.goindustry.com.�To�learn�more�about�how�a�
webcast�works,�please�go�to�the�Support�section�on�our�homepage�and�choose�“Webcast�Instructions.”
ASC�CORPORATIONTHURSDAY, JUNE 21 AT 9:00 A.M. (EDT)
IP-7210210
www.industrialauctioneers.org
PresortedFirst Class Mail
U.S. PostagePAID
Eugene, OregonPermit No. 305
POSTMASTER:�Dated Material.Please Deliver Promptly.
FIRST�CLASS�MAIL
http://www.goindustry.com
e-mail: [email protected]
NORTH�AMERICAN�OFFICESARIZONA, MARYLAND, MICHIGAN, NEW YORK, ILLINOIS, FLORIDA, CONNECTICUT,
NEBRASKA, WASHINGTON, ONTARIO, ADDITIONAL OFFICES WORLDWIDE
EXECUTIVE�OFFICES11425 CRONHILL DRIVE, OWINGS MILLS, MARYLAND 21117(410) 654‑7500 • (800) 722‑3334 • Fax (410) 654‑5876
LOCAL SERVICE WITH GLOBAL REACH — OFFICES IN OVER 20 COUNTRIES
INFORMATION PROVIDED IS BELIEVED TO BE ACCURATE, BUT IS NOT GUARANTEED
DIRECTIONSFrom�BWI�Airport:�Bear left toward I-95W (signs for hourly parking). Slight left at I-95W (signs for Airport Exit/I-95W), proceed 4 miles. Take Exit 4A to merge onto I-95N toward I-695/Baltimore, proceed 3 miles. Take Exit 49B on the left to merge onto I-695N toward I-70/I-83/Towson, proceed 11 miles. Take Exit 20 for Reisterstown Road/MD-140N toward Garrison. Merge onto MD-140W/Reisterstown Road, watch for auction signs. Distance from airport to sale location is approximately 20 miles.
HOTEL�ACCOMMODATIONSHilton Garden Inn Owings Mills 4770 Owings Mills Boulevard Owings Mills, Maryland, 21117 Tel: (410) 654-0030 AmeriSuites 4730 Painters Mill Road, Owings Mills, Maryland 21117 Tel: (410) 998-3630
FINANCING�YOUR�AUCTION�PURCHASEConserve Your Cash and Increase
Your Bidding Power. AuctionLease Provides M&E Financing With
Approvals from $5,000 to $999,000. (800) 438-1470
Apply Online: www.AuctionLease.com“Buy What Appreciates, Lease What
Depreciates.” -J. Paul Getty
GoIndustry�Appraisal�Services
GoIndustry’s�professional�appraisal�department�values�machinery,�
equipment�and�inventory�throughout�the�world.�From�small�quantities�to�multiple�
plants,�our�large�accredited�staff�is�available�to�service�your�appraisal�needs.�
USPAP�compliant�and�accepted�by�major�financial�institutions.�
Executive�Offices:�(800)�722-3334Call�today�for�a�no�obligation�quote.
Some items may be subject to prior sale.
AUCTIONSITE
AIRPORT