+ All Categories
Home > Documents > DUPONT CONTROLLED ENVIRONMENTS...in pharmaceutical, medical device, biotech and electronic settings...

DUPONT CONTROLLED ENVIRONMENTS...in pharmaceutical, medical device, biotech and electronic settings...

Date post: 20-Mar-2020
Category:
Upload: others
View: 3 times
Download: 0 times
Share this document with a friend
32
DUPONT CONTROLLED ENVIRONMENTS Garment and Product Catalog
Transcript
Page 1: DUPONT CONTROLLED ENVIRONMENTS...in pharmaceutical, medical device, biotech and electronic settings that require high standards for particle and microbiological contamination control.

DUPONT CONTROLLED ENVIRONMENTSGarment and Product Catalog

Page 2: DUPONT CONTROLLED ENVIRONMENTS...in pharmaceutical, medical device, biotech and electronic settings that require high standards for particle and microbiological contamination control.
Page 3: DUPONT CONTROLLED ENVIRONMENTS...in pharmaceutical, medical device, biotech and electronic settings that require high standards for particle and microbiological contamination control.

CONTENTS

4 DUPONT GARMENTS FOR CONTROLLED ENVIRONMENTS

5 DUPONT GARMENT MATERIAL

6 CONTROLLED ENVIRONMENTS APPAREL SELECTION GUIDE

8 DUPONT™ TYVEK® ISOCLEAN®

9 GOWNING RECOMMENDATIONS

10 THE DUPONT CE GARMENT PORTFOLIO

13 GARMENT PROCESSING AND PACKAGING OPTIONS

GARMENTS

14 DuPont™ Tyvek® IsoClean®

17 DuPont™ Tyvek® Micro-Clean® 2-1-2

DuPont™ SureStep™/DuPont™ Dura-Trac™

18 DuPont™ Tyvek® Plus

19 DuPont™ ProClean®

20 DuPont™ Sierra™

21 DuPont™ General-Purpose Products

22 General-Purpose Products

26 DuPont™ ProShield® Basic

27 DuPont™ Tychem®

31 HOW TO INTERPRET DUPONT PRODUCT PART NUMBERS

Page 4: DUPONT CONTROLLED ENVIRONMENTS...in pharmaceutical, medical device, biotech and electronic settings that require high standards for particle and microbiological contamination control.

DUPONT GARMENTS FOR CONTROLLED ENVIRONMENTS

QUALITY, COMFORT AND DURABILITY FOR YOUR CLEANROOMFor more than 200 years, DuPont has been putting science to work by creating sustainable solutions essential to a better, safer, healthier life for people everywhere. One of the areas in which safety and health are of paramount importance is in cleanrooms and controlled environments.

DuPont understands your need to do everything possible to improve productivity and reduce risk in your controlled environment. The DuPont Controlled Environments portfolio offers a comprehensive selection of single-use cleanroom apparel and accessories designed for use in pharmaceutical, medical device, biotech and electronic settings that require high standards for particle and microbiological contamination control.

DuPont™ Tyvek® garments have a long history of use in cleanrooms due to their excellent barrier to particles, microorganisms and non-hazardous liquids. They offer an ideal balance of protection, durability, and comfort. They are available in many styles for different cleanroom and controlled environment applications.

With the DuPont Controlled Environments offering, you get the advantage of a wide range of proven,

science-based solutions that help keep your cleanroom environment protected.

4 Customer Service 1 800 931 3456 safespec.dupont.com www.ControlledEnvironments.DuPont.com

Page 5: DUPONT CONTROLLED ENVIRONMENTS...in pharmaceutical, medical device, biotech and electronic settings that require high standards for particle and microbiological contamination control.

DUPONT GARMENT MATERIAL

DUPONT QUALITY SYSTEMS FOR CLEANROOM GARMENTSDuPont single-use garments for controlled environments offer the following standards of quality:

DUPONT™ TYVEK® STERILE GARMENTSThe highest performing garments in our product line are made from DuPont™ Tyvek®, which has been used to make high-quality cleanroom garments for more than 20 years. Tyvek® is made by DuPont with a proprietary flash-spinning process that creates continuous fibers of high-density polyethylene that are randomly distributed and non-directional.• Tyvek® is tough, yet lightweight and soft.• Tyvek® offers an ideal balance of protection, durability and comfort.• Tyvek® acts as a breathable barrier against particles and bacteria.• Tyvek® repels aqueous liquids and liquid aerosols.• Tyvek® is inherently low linting and abrasion resistant. Image shown at 200x magnification.

DuPont™ Tyvek® is made with a unique flash-spinning process that creates a tortuous path for particles.

SINGLE-USE GARMENTS FROM DUPONTDuPont sterile cleanroom garments, designed for single use, offer meaningful advantages in today’s challenging cleanroom environments, including:• Quality – single-use garments are not subjected

to multiple cycles of wearing, laundering and sterilization, so fabric barrier and strength are consistent and predictable. Also, DuPont Controlled Environments garments help minimize cross-contamination risk because clean-processing and packaging are done in a facility that only handles new garments.

• Flexibility – the DuPont single-use apparel program allows you to order only the quantities that you plan to use, which offers flexibility as your needs change.

• Cost Control – single-use garments help eliminate budget uncertainties associated with garment repair, damage and loss, helping you to better predict expenditures.

• The DuPont Controlled Environments quality management system is ISO 9001:2008 registered.

• DuPont™ Tyvek® IsoClean® sterile garments have a sterility assurance level of 10-6. Radiation doses are validated in accordance with ANSI/AAMI/ISO 11137 through bioburden and dose verification testing.

• DuPont™ Tyvek® IsoClean® sterile garments are gamma irradiated in a facility that is registered by ISO 13485 quality standard and adheres to the requirements of ANSI/AAMI/ISO 11137.

• A Certificate of Sterility and a Certificate of Compliance come with every shipment of sterile Tyvek® IsoClean® single-use garments.

• Dose audits are conducted quarterly to maintain dose validation.

• Customers are invited to audit our manufacturing and sterilization facilities.

• Quality documentation is readily available and accurate when requested to help meet customer requirements.

• Lot traceability is maintained through garment manufacturing, processing and sterilization.

5 Customer Service 1 800 931 3456 safespec.dupont.com www.ControlledEnvironments.DuPont.com

Page 6: DUPONT CONTROLLED ENVIRONMENTS...in pharmaceutical, medical device, biotech and electronic settings that require high standards for particle and microbiological contamination control.

CONTROLLED ENVIRONMENTS APPAREL SELECTION GUIDE

When it comes to working in a broad range of controlled environments, specifiers have many product options from which to select. The process to understand which option matches a given environment can be confusing and taxing. DuPont has tried to help reduce some of that burden by providing a complete line of products and information to help guide specifiers through their selection process.

To get the most out of your cleanroom apparel, it is necessary to understand where each product can be used. To provide a quicker overview of our products and where they are intended for use, we developed the simple guide below. Our goal is to provide the appropriate DuPont product that is suitable for a given environment or hazard.

FABRIC PERFORMANCE FEATURES

Fabric Available Sterile

Particle Barrier

Non- Hazardous Liquid Barrier

Comfort Durability Static Dissipation†

Particle Shedding Strengths

DuPont™ Tyvek® IsoClean® flashspun polyolefin, clean-processed

Yes, CS option ● ● ●

Ideal combination of protection, durability and comfort

DuPont™ Tyvek® IsoClean® flashspun polyolefin, bulk

Yes, Sterile OS option ● ● ● ●

DuPont™ Tyvek® Micro-Clean® 2-1-2 flashspun polyolefin

Yes, Sterile OS option ● ●

**●

DuPont™ ProClean® microporous films

No ●* ●* ● ● ● Effective liquid barrier; low cost

*Barrier properties may be compromised through use.

**Antistatic performance may be reduced for sterile products.

† Nuisance static.

Comparison within the DuPont portfolio: ● Best Better (Blank) Not recommended

6 Customer Service 1 800 931 3456 safespec.dupont.com www.ControlledEnvironments.DuPont.com

Page 7: DUPONT CONTROLLED ENVIRONMENTS...in pharmaceutical, medical device, biotech and electronic settings that require high standards for particle and microbiological contamination control.

CONTROLLED ENVIRONMENTS APPAREL SELECTION GUIDEDUPONT CONTROLLED ENVIRONMENTS GARMENTS DUPONT™ TYVEK® ISOCLEAN®, TYVEK® MICRO-CLEAN® 2-1-2, DUPONT™ PROCLEAN®

Environments/Hazards

DuPont™ Tyvek® IsoClean® DuPont™ Tyvek® Micro-Clean® 2-1-2

DuPont™ ProClean®*

ConsiderationsClean-Processed

SterileSterile

Clean-Processed Non-Sterile

Bulk Non-Sterile Sterile Non-Sterile** Non-Sterile

Envi

ronm

ents

ISO Class 5 Aseptic Cleanrooms (Former FED-STD- 209E; Class 100) ●

Tyvek® IsoClean® sterile garments offer excellent cleanliness, barrier and sterility assurance level.

ISO Class 6, 7, and 8 Bioburden Control Areas (Former FED-STD- 209E; Class 1000, 10,000 and 100,000)

● ●

Tyvek® IsoClean® sterile garments offer excellent cleanliness, barrier and sterility assurance level.

ISO Class 6, 7, and 8 Cleanrooms (Former FED-STD-209E; Class 1000, 10,000 and 100,000) ● ●

Tyvek® provides an inherent particle barrier and durability, and is low linting. Clean processing and bound seams should be considered for more critical environments.

Haz

ards

Non-hazardous, dry particles

● ● ● ● ● ● ●*

Tyvek® provides an inherent barrier against small particles. Bound seam garments offer a higher level of protection than serged seam garments.

Non-hazardous, light liquid splash

●*

ProClean® provides an effective barrier against a variety of common non-hazardous liquids.

Hazardous powdersNotice: DuPont Controlled Environments garments should not be used in potentially explosive or flammable environments.

● ● ● ●

Use bound seamed garments when working with hazardous powders.

Hazardous liquid splash Examples: organic solvents, caustics

Please refer to our Tychem® product line for liquid and vapor chemical protection.

Electric arc, industrial fire hazard, welding

Do Not Use

Please refer to Nomex® for flame-resistant apparel. Controlled Environment garments are not suitable for firefighting activities, nor for protection from hot liquids, steam, molten metals, welding, electric arc or thermal radiation.

Comparison within the DuPont portfolio: ● Best Better (Blank) Not recommended *Barrier properties may be compromised through use. **Packaged individually.

7 Customer Service 1 800 931 3456 safespec.dupont.com www.ControlledEnvironments.DuPont.com

Page 8: DUPONT CONTROLLED ENVIRONMENTS...in pharmaceutical, medical device, biotech and electronic settings that require high standards for particle and microbiological contamination control.

DUPONT™ TYVEK® ISOCLEAN®

DUPONT™ TYVEK® ISOCLEAN® GARMENTS FOR ISO 4/5 (CLASS 10/100) AND ISO 7/8 (CLASS 10,000/100,000) CONTROLLED ENVIRONMENTS

One of the most popular products in the DuPont Controlled Environments portfolio, DuPont™ Tyvek® IsoClean® clean-processed and sterile single-use garments offer an ideal balance of protection, durability and comfort. In addition, they feature the lowest particle shedding of any garments in the DuPont portfolio.

Tyvek® IsoClean® garments are available sterile and non-sterile in a wide variety of styles, such as coveralls, frocks, lab coats, hoods, gowns, bouffants, shoe and boot covers and sleeve protectors. For more information on Tyvek® IsoClean® garments, see p. 14 of this catalog.

Tyvek® IsoClean® Clean and sterile bouffantIC729SWH000250CS

Elastic wrists and ankles are covered by garment materials so the elastic is not exposed.

Controlled Environment Sterile face maskML7360WH0002500S

Bound seam garments offer better particle barrier than serged seams.

Gripper™ soles offer a higher level of slip resistance than standard PVC soles.

Tyvek® IsoClean® Clean and sterile boot cover IC458BWHXX0100CS

Garments folded to facilitate aseptic donning

Tyvek® IsoClean® Clean and sterile coverallIC253BWHXX0025CS

Tyvek® IsoClean® sterile cuff tape994790WHXX04000S

Tyvek® IsoClean® Clean and sterile hoodIC668BWH000100CS

GOWNING FOR ISO 5 CONTROLLED ENVIRONMENTS — PER IEST-RP-CC003

GOWNING FOR ISO 7/8 CONTROLLED ENVIRONMENTS — PER IEST-RP-CC003

Tyvek® IsoClean® Frock with snapsIC270BWHXX003000orTyvek® IsoClean® Frock with zipperIC264SWHXX00300B

Tyvek® IsoClean® BouffantIC729SWH0002500B

Tyvek® IsoClean® Shoe cover with Gripper™ sole IC451SWHXX01000B

8 Customer Service 1 800 931 3456 safespec.dupont.com www.ControlledEnvironments.DuPont.com

Page 9: DUPONT CONTROLLED ENVIRONMENTS...in pharmaceutical, medical device, biotech and electronic settings that require high standards for particle and microbiological contamination control.

GOWNING RECOMMENDATIONS

SEAM CONSTRUCTIONEven the best protective fabrics are useless without strong, tight seams.

Bound

Tightly sewn with a reinforced outer binding to increase seam strength and barrier. For potential misting exposure of non-hazardous liquids or particle penetration through the seam.

BSerged or sewn

A seam produced when three threads are interlocked around the raw edges of two pieces of material for a strong, stress-resistant seam.

SCovered elastic

Elastic covered by garment material so elastic is not exposed.

ISO Classification Number

0.1 µm 0.2 µm 0.3 µm 0.5 µm 1.0 µm 5.0 µm SIEnglish Former FED-STD-209E

ISO Class 1 10 2

ISO Class 2 100 24 10 4 8

ISO Class 3 1000 237 102 35 83 M 1.5 1

ISO Class 4 10000 2370 1020 352 832 29 M 2.5 10

ISO Class 5 100000 23700 10200 3520 8320 293 M 3.5 100

ISO Class 6 1000000 237000 102000 35200 83200 2930 M 4.5 1000

ISO Class 7 352000 832000 29300 M 5.5 10000

ISO Class 8 3520000 8320000 293000 M 6.5 100000

ISO Class 9 35200000 83200000 2930000

ISO Class 8 (Class 100,000)

ISO Class 7 (Class 10,000)

ISO Class 6 (Class 10,000)

ISO Class 5 (Class 1,000)

ISO Class 4 (Class 100)

Hair cover • • • • •

Hood • •

Face mask • •

Frock • •

Coverall • • •

Shoe covers • •

Boots • • •

ISO 14644-1 AIR CLEANLINESS CLASSES FOR CLEANROOMS AND CLEAN ZONES

IEST-RP – CC003.4 MINIMUM GOWNING RECOMMENDATIONS

Taped

Both sewn and taped to provide strong chemical resistance against heavy liquid splashes and tough seam stress. A sewn seam is covered with a strip of compatible material by heat-sealing.

T

9 Customer Service 1 800 931 3456 safespec.dupont.com www.ControlledEnvironments.DuPont.com

Page 10: DUPONT CONTROLLED ENVIRONMENTS...in pharmaceutical, medical device, biotech and electronic settings that require high standards for particle and microbiological contamination control.

THE DUPONT CE GARMENT PORTFOLIO

To help you select the right garments for your controlled environment, please select garment type, sterile or non-sterile, and your preference for either clean-processed, bulk or individually packaged.

COVERALLS—HOODED Sterile Non-Sterile

CleanClean

Tyvek® IsoClean®

IC105p. 14

Tyvek® IsoClean®

IC105p. 14

Tyvek® IsoClean®

IC105p. 14

Tyvek® IsoClean®

IC180p. 14

Bulk

Tychem® QCQC122p. 28

Tychem® QCQC127p. 27

COVERALLS—WITHOUT HOOD Sterile

Clean

Tyvek® IsoClean®

IC182p. 14

Tyvek® IsoClean®

IC253p. 14

Tyvek® IsoClean®

IC254p. 14

Tyvek® IsoClean®

IC253p. 14

Tyvek® Micro-Clean® 2-1-2CC252p. 17

Individual packages

Non-Sterile

Clean

Tyvek® IsoClean®

IC181p. 14

Tyvek® IsoClean®

IC182p. 14

Tyvek® IsoClean®

IC253p. 14

Bulk

Tyvek® IsoClean®

IC182p. 14

Tyvek® IsoClean®

IC253p. 14

ProClean®

PC143p. 19

Tyvek® IsoClean®

IC181p. 14

Individual packages

Tyvek® Micro-Clean® 2-1-2CC252p. 17

Tychem® QCQC125p. 28

Tychem® QCQC120p. 27

10 Customer Service 1 800 931 3456 safespec.dupont.com www.ControlledEnvironments.DuPont.com

Page 11: DUPONT CONTROLLED ENVIRONMENTS...in pharmaceutical, medical device, biotech and electronic settings that require high standards for particle and microbiological contamination control.

THE DUPONT CE GARMENT PORTFOLIO

HOODS & BOUFFANTS Sterile

Clean

Tyvek® IsoClean®

IC666p. 15

Tyvek® IsoClean®

IC668p. 15

Tyvek® IsoClean®

9820p. 16

Tyvek® IsoClean®

IC729p. 15

Non-Sterile

Clean Bulk

Tyvek® IsoClean®

IC666p. 15

Tyvek® IsoClean®

IC666p. 15

Tyvek® IsoClean®

IC668p. 15

Tyvek® IsoClean®

IC668p. 15

ProClean® PC663p. 19

Tyvek® IsoClean®

IC729p. 15

Tyvek® IsoClean®

IC729p. 15

Tyvek® IsoClean®

IC270p. 15

Tyvek® IsoClean®

IC270p. 15

FROCKS & LAB COATS Sterile Non-Sterile

Tyvek® IsoClean®

IC262 p. 15

Tyvek® IsoClean®

IC270p. 15

ProClean®

PC270p. 19

ProClean®

PC271p. 19

Tyvek® IsoClean®

IC224p. 15

Tyvek® IsoClean®

IC262p. 15

Tyvek® IsoClean®

IC263p. 15

Tyvek® IsoClean®

IC264p. 15

ProShield® BasicPB267p. 26

ProShield® BasicPB219p. 26

Clean CleanIndividual packages Bulk

SLEEVES & CUFF TAPE

Sterile

Clean Individual packages

Non-Sterile

Tyvek® IsoClean®

IC501p. 15

Tyvek® IsoClean®

IC501p. 15

gen. purpose DE500p. 21

Tyvek® IsoClean® 99479p. 16

Tyvek® IsoClean®

IC501p. 15

Tyvek® IsoClean®

IC501p. 15

ProClean®

PC500p. 19

gen. purpose QC500p. 21

Clean Bulk

11 Customer Service 1 800 931 3456 safespec.dupont.com www.ControlledEnvironments.DuPont.com

Page 12: DUPONT CONTROLLED ENVIRONMENTS...in pharmaceutical, medical device, biotech and electronic settings that require high standards for particle and microbiological contamination control.

THE DUPONT CE GARMENT PORTFOLIO

Sierra™

ML737p. 20

MASKS & FACE VEILS

Sterile

Individual packages

Sierra™

ML730p. 20

Sierra™

ML736p. 20

Non-Sterile

Individual packages

Tyvek® IsoClean®

IC731p. 16

Sierra™

ML733p. 20

Sierra™

ML736p. 20

gen. purpose PP741p. 21

gen. purpose PP740p. 21

APRONS, GOWNS & SMOCKS

Non-Sterile

gen. purposeTY273p. 21

Tyvek® IsoClean®

IC226p. 15

Tyvek® IsoClean®

IC701p. 15

Tychem® QCQC275p. 28

Tychem® QCQC278p. 28

Bulk

Tyvek® IsoClean®

IC457p. 16

Individual packages

SHOE & BOOT COVERS

Sterile

Tyvek® IsoClean®

IC458p. 16

Tyvek® IsoClean®

IC447p. 16

Clean

Tyvek® IsoClean®

IC447p. 16

Tyvek® IsoClean®

IC444p. 16

Non-Sterile

Clean Bulk

Tyvek® IsoClean®

IC458p. 16

Tyvek® IsoClean®

IC447p. 16

SureStep™

PE440p. 17

ProClean®

PC444p. 19

Dura-Trac™

DT440p. 17

SureStep™

PE444p. 17

Tyvek® IsoClean®

IC451p. 16

Tyvek® IsoClean®

IC461p. 16

Tyvek® IsoClean®

IC457p. 16

Tyvek® IsoClean®

IC458p. 16

12 Customer Service 1 800 931 3456 safespec.dupont.com www.ControlledEnvironments.DuPont.com

Page 13: DUPONT CONTROLLED ENVIRONMENTS...in pharmaceutical, medical device, biotech and electronic settings that require high standards for particle and microbiological contamination control.

GARMENT PROCESSING AND PACKAGING OPTIONS

STERILEClean-processed and sterile (option code CS) Garments are specially processed to minimize particle shedding, then folded to aid in aseptic donning and individually packaged in an ISO Class 4 cleanroom. The case quantity is packaged in a cardboard case with two polyethylene liners. Sterility is achieved by gamma irradiation. Radiation dosage is validated in accordance with ISO 11137 for a Sterility Assurance Level (SAL) of 10–6.

Sterile (option code 0S) Garments are folded to aid in aseptic donning and individually packaged. The case quantity is packaged in a cardboard case with two polyethylene liners.

Some sterile items are folded and individually packaged in an ISO Class 5 cleanroom (see garment data sheet). Sterility is achieved by gamma irradiation. Radiation dosage is validated in accordance with ISO 11137 for a Sterility Assurance Level (SAL) of 10–6.

NON-STERILE

Clean-processed (option code 0C) Garments are specially processed to minimize particle shedding and individually packaged in an ISO Class 4 cleanroom. The case quantity is packaged in a cardboard case with two polyethylene liners.

Individually packaged (option code PI) Garments are individually packaged in an ISO Class 5 cleanroom. The case quantity is packaged in a cardboard case with two polyethylene liners.

Bulk (option code 0B or 00) Case quantities are packed in a cardboard case with two polyethylene liners. Tychem® garments are packed in a cardboard case with a single polyethylene liner.

Note: Individual packaging for shoe and boot covers indicates that each pair has its own sealed bag. Masks and cuff tapes may have subgroupings of individually packaged items within the case.

STERILE PACKAGING PROCESSCRITICAL ASSURANCE STERILE APPAREL MULTILEVEL PACKAGING

Outer shipping carton is securely sealed. Carton displays product label, sterile dot indicator and fully traceable lot number.

1

Multilevel interior packaging features one or two polyethylene carton liners. The outer liner provides protection from dust and contamination, particularly if outer carton is discarded. A lot-specific Certificate of Compliance with sterile dot indicator is placed between the two liners. The inner liner allows transportation of product to a cleaner, more controlled environment.

2

Completely heat sealed, airtight individual garment opaque bag is made from durable polyethylene film and features a varnish-coated ink, easy-to-open linear-tear and embossed lot number.

3

Sterile garment consistently folded and packaged to ease aseptic donning. Traceable lot numbers are stamped on each individual sterile garment.

4

Opaque sterile pouch packaging features a no-smear label.

13 Customer Service 1 800 931 3456 safespec.dupont.com www.ControlledEnvironments.DuPont.com

Page 14: DUPONT CONTROLLED ENVIRONMENTS...in pharmaceutical, medical device, biotech and electronic settings that require high standards for particle and microbiological contamination control.

DUPONT PAGE HEADNOTE: Please substitute your size for XX when ordering. See p. 31 for full part number description.

NOTE: All sizes not available in all styles. For universal sizing use 00 in the part number.

Seams and closures have less barrier than fabric.

WARNING: Cleanroom apparel should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Cleanroom fabrics should have slip-resistant materials on the outer sole of boots, shoe covers or other garment surfaces in conditions where slipping could occur.

PART NUMBER GUIDEIC 253 B WH LG 0025 CSFabric type

Garment design

Seam type Color Size Case count

Options

DUPONT™ TYVEK® ISOCLEAN®

Coverall IC181SWHXX002500IC181SWHXX00250CSerged seamsStandard collar Set sleeveElastic wrist, ankleZipper closureWhite25/csSM, MD, LG, XL, 2X, 3X, 4X, 5X, 6X, 7X, 8X for 00 optionSM, MD, LG, XL, 2X, 3X, 4X for 0C option

CoverallIC254BWHXX0025CS Bound seamsBound neckDolman sleeveCovered elastic wrist, ankleZipper closureSnaps for aseptic donningWhite 25/csSM, MD, LG, XL, 2X, 3X, 4X

Hood: IC668BCoverall: IC181S

Coverall IC105SWHXX002500IC105SWHXX00250CIC105SWHXX0025CSSerged seamsStandard hoodElastic hood openingSet sleeveElastic wrist, ankleAttached thumb loopsZipper closureAttached boots with PVC solesWhite25/csMD, LG, XL, 2X, 3X

Coverall IC182BWHXX002500IC182BWHXX00250C IC182BWHXX0025CSBound seamsBound neckRaglan sleeveCovered elastic wrist, ankleZipper closureWhite25/csSM, MD, LG, XL, 2X, 3X, 4X

Coverall IC253BWHXX00250BIC253BWHXX00250SIC253BWHXX00250CIC253BWHXX0025CSBound seamsBound neckDolman sleeveCovered elastic wrist, ankleZipper closureWhite25/csSM, MD, LG, XL, 2X, 3X, 4X, 5X for 0B, 0S, and 0C optionsSM–7X for CS option

Coverall IC255BWHXX00250BIC255BWHXX00250SIC255BWHXX00250CIC255BWHXX0025CSBound seamsBound neckDolman sleeveCovered elastic wrist, ankleThumb loopStorm flapZipper closureWhite25/csSM, MD, LG, XL, 2X, 3X, 4X, 5X

DUPONT™ TYVEK® ISOCLEAN®

• Made from DuPont™ Tyvek® brand flashspun polyolefin protective material

• Unique, patented flash-spinning process creates a barrier to dry particles, microorganisms and non-hazardous liquids

• Comfortable, lightweight and durable• Clean-processed garments offer

lowest level of particle shedding within DuPont product portfolio

• Garments available gamma sterilized to an SAL of 10–6

• Serged or bound seams with covered elastic options

• Bound seam garments offer highest particle barrier within DuPont CE product portfolio

• Traceability on all sterilized apparel

• Gripper™ soles offer a higher level of slip resistance than standard PVC soles

CHOOSE FROM THESE OPTIONS:• CS = Clean and Sterile: clean-

processed, individually packaged and sterilized by gamma irradiation

• 0S = Sterile: individually packaged and sterilized by gamma irradiation

• 0C = Clean: clean-processed, individually packaged

• 00 or 0B = Bulk packaged• PI = Individually packaged in an

opaque bag

Coverall IC180SWHXX002500Serged seamsStandard hoodElastic hood openingSet sleeveElastic wrist, ankleZipper closureWhite25/csMD, LG, XL, 2X, 3X

14 Customer Service 1 800 931 3456 safespec.dupont.com www.ControlledEnvironments.DuPont.com

Page 15: DUPONT CONTROLLED ENVIRONMENTS...in pharmaceutical, medical device, biotech and electronic settings that require high standards for particle and microbiological contamination control.

NOTE: All sizes not available in all styles. For universal sizing use 00 in the part number.

Seams and closures have less barrier than fabric.

WARNING: Cleanroom apparel should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Cleanroom fabrics should have slip-resistant materials on the outer sole of boots, shoe covers or other garment surfaces in conditions where slipping could occur.

PART NUMBER GUIDEIC 253 B WH LG 0025 CSFabric type

Garment design

Seam type Color Size Case count

Options

NOTE: Please substitute your size for XX when ordering. See p. 31 for full part number description.

DUPONT™ TYVEK® ISOCLEAN®

FrockIC263SWHXX00300BSerged seamsHigh mandarin collar w/snapSet sleeveElastic wristSnap closure (6)White30/csSM, MD, LG, XL, 2X, 3X, 4X

FrockIC262SWHXX00300B IC262SWHXX00300SSerged seamsHigh mandarin collar w/adjustable snapsRaglan sleeveElastic wristSnap closure (6)Generous cutWhite30/csSM, MD, LG, XL, 2X, 3X, 4X for 0B optionMD, LG, XL, 2X, 3X for 0S option

FrockIC270BWHXX003000IC270BWHXX00300CIC270BWHXX0030CSBound seamsBound neckSet sleeveCovered elastic wristSnap closure (6 + 1 adjustable)White30/csSM, MD, LG, XL, 2X, 3X, 4X

SmockIC226SWHXX00300BSerged seamsBound neckSet sleeveElastic wristWrap around (ties at waist)Pockets (1 chest pencil, 2 lower front)White30/csSM, MD, LG, XL

FrockIC264SWHXX00300BIC264SWHXX00300CIC264SWHXX00300SIC264SWHXX0030CSSerged seamsBound neckRaglan sleeveElastic wristZipper closureA-lineWhite30/csSM, MD, LG, XL, 2X, 3X, 4X

Lab coatIC224SWHXX00300BSerged seamsLaydown collarRaglan sleeveSnap closure (5)Pockets (1 chest pencil, 2 lower front)White30/csSM, MD, LG, XL, 2X

GownIC701SWHXX003000Serged seamsBound neck w/tiesKnit cuffBound ties originating at center front waistWhite30/csUniversal sizing (00)

SleevesIC501BWHXX01000BIC501BWHXX01000CIC501BWHXX01000SIC501BWHXX0100CSBound seamsCovered elastic wrist, bicep18" lengthWhite100/csUniversal sizing (00)

HoodIC668BWHXX01000BIC668BWHXX01000CIC668BWHXX0100CSBound seamsFull face openingBound hood openingTies with loops for fitWhite100/csUniversal sizing (00)

BouffantIC729SWHXX02500BIC729SWHXX02500CIC729SWHXX0250CSSerged seamsElastic headband21.5" diameterWhite250/csUniversal sizing (00)

HoodIC666BWHXX010000IC666BWHXX01000CIC666BWHXX0100CSBound seamsBound hood opening (eyes only)Snaps for fitBound bottomWhite100/csMD, LG

Frock: IC270

15 Customer Service 1 800 931 3456 safespec.dupont.com www.ControlledEnvironments.DuPont.com

Page 16: DUPONT CONTROLLED ENVIRONMENTS...in pharmaceutical, medical device, biotech and electronic settings that require high standards for particle and microbiological contamination control.

DUPONT PAGE HEAD

NOTE: All sizes not available in all styles. For universal sizing use 00 in the part number.

Seams and closures have less barrier than fabric.

WARNING: Cleanroom apparel should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Cleanroom fabrics should have slip-resistant materials on the outer sole of boots, shoe covers or other garment surfaces in conditions where slipping could occur.

PART NUMBER GUIDEIC 253 B WH LG 0025 CSFabric type

Garment design

Seam type Color Size Case count

Options

DUPONT™ TYVEK® ISOCLEAN®

NOTE: Please substitute your size for XX when ordering. See p. 31 for full part number description.

Hood/mask9820Bound seamsBound head openingsTies with loops for fitHood—whiteFace mask—bluePleatedPolyethylene outer7" Individually packaged100/csUniversal sizing (00)

Cuff tape994790WHXX04000SMade of Tyvek® IsoClean®

20" long x 3" wideWhite400/csUniversal sizing (00)

MaskIC7310BUXX03000B Bound Tyvek® tiesPleatedPolyethylene outerPBT filterMetal nose pieceBlue300/cs7"Universal sizing (00)

Boot coverIC458BWHXX01000BIC458BWHXX01000CIC458BWHXX0100CSBound seamsCovered elastic openingTies at ankleGripper™ sole18" highWhite100/csMD, LG, XL

Shoe coverIC451SWHXX01000BSerged seams Elastic openingGripper™ sole5" highWhite100/csMD, LG, XL

Shoe coverIC461SWHXX03000BSerged seams Elastic openingPVC soleElastic toe5" highWhite300/csSM, MD, LG, XL

Boot coverIC444SWHXX02000BSerged seamsElastic openingElastic anklePVC sole15" highWhite200/csMD, LG, XL

Boot coverIC447SWHXX01000BIC447SWHXX01000CIC447SWHXX0100CSSerged seamsElastic openingElastic ankleGripper™ sole18" highWhite100/csMD, LG, XL for 0B and 0C optionsMD, LG, XL, 2X for CS option only

Boot coverIC457SWHXX01000BIC457SWHXX01000SSerged seamsCovered elastic openingTies at anklePVC sole18" highWhite100/csSM, MD, LG, XL

16 Customer Service 1 800 931 3456 safespec.dupont.com www.ControlledEnvironments.DuPont.com

Page 17: DUPONT CONTROLLED ENVIRONMENTS...in pharmaceutical, medical device, biotech and electronic settings that require high standards for particle and microbiological contamination control.

NOTE: Please substitute your size for XX when ordering. See p. 31 for full part number description.

WARNING: Cleanroom apparel should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Cleanroom fabrics should have slip-resistant materials on the outer sole of boots, shoe covers or other garment surfaces in conditions where slipping could occur.

DUPONT™ TYVEK® MICRO-CLEAN® 2-1-2

DUPONT™ SURESTEP™/DUPONT™ DURA-TRAC™

CoverallCC252BBUXX00250SCC252BBUXX0025PIBound seamsBound neck with loop at center backDolman sleeveCovered elastic wrist, ankleZipper closureBlue25/csSM, MD, LG, XL, 2X, 3X, 4X, 5X

DUPONT™ TYVEK® MICRO-CLEAN® 2-1-2• Made from DuPont™ Tyvek®

brand flashspun polyolefin protective material

• Coated on both sides with proprietary 2-1-2 blue polymeric resin

• Antistatic treated• Garments available gamma

sterilized to an SAL of 10–6

• Traceability on all sterilized apparel

CHOOSE FROM THESE OPTIONS:

• 0S = Sterile: individually packaged and sterilized by gamma irradiation

• PI = Individually packaged in an opaque bag

Coverall:CC252B

DUPONT™ SURESTEP™/ DUPONT™ DURA-TRAC™

• Spunbonded polypropylene with polyethylene film coating

• Slip resistance—both wet and dry

CHOOSE FROM THESE OPTIONS:

• 00 or 0B = Bulk packaged

Boot coverPE444SWHXX010000Serged seamsElastic openingElastic ankle13" heightWhite100/csLG, XL

Shoe coverDT440SBUXX03000BSerged seams with heat sealElastic openingElastic toe, heel6.5" heightBlue300/csLG, XL

Shoe coverPE440SWHXX020000PE440SBUXX020000Serged seamsElastic opening5.5" heightWhite, blue200/csMD, LG, XLMD only available in white & bulk packaged

Shoe Cover: PE440S

NOTE: Please substitute your size for XX when ordering. See p. 31 for full part number description.

17 Customer Service 1 800 931 3456 safespec.dupont.com www.ControlledEnvironments.DuPont.com

Page 18: DUPONT CONTROLLED ENVIRONMENTS...in pharmaceutical, medical device, biotech and electronic settings that require high standards for particle and microbiological contamination control.

DUPONT PAGE HEADNOTE: Please substitute your size for XX when ordering. See p. 31 for full part number description.NOTE: Please substitute your size for XX when ordering. See p. 31 for full part number description.

NOTE: All sizes not available in all styles. For universal sizing use 00 in the part number.

Seams and closures have less barrier than fabric.

WARNING: Cleanroom apparel should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Cleanroom fabrics should have slip-resistant materials on the outer sole of boots, shoe covers or other garment surfaces in conditions where slipping could occur.

PART NUMBER GUIDEIC 253 B WH LG 0025 CSFabric type

Garment design

Seam type Color Size Case count

Options

DUPONT™ TYVEK® PLUS

Coverall (00 only)TY198TWHXX0025YYSerged and over-taped seamsSelf-adhesive chin flapElastic face, wrist and ankleElastic thumb loopsWhite25/csSM, MD, LG, XL, 2X, 3X, 4X, 5X, 6X, 7X

TYVEK® PLUS

Tyvek® Plus garments are composed of flashspun high-density polyethylene which creates a unique, non-woven material available only from DuPont. Tyvek® Plus Type 4/5/6 coveralls offer the following safety and comfort benefits:• Chemical protective clothing,

Category III, Type 4-B, 5-B and 6-B• Protection against infective agents

(EN 14126) including resistance to penetration by blood and body fluids using synthetic blood (ISO 16603)

• Fabric and seams offer chemical permeation barrier to low concentration water-based inorganic chemicals

18 Customer Service 1 800 931 3456 safespec.dupont.com www.ControlledEnvironments.DuPont.com

Page 19: DUPONT CONTROLLED ENVIRONMENTS...in pharmaceutical, medical device, biotech and electronic settings that require high standards for particle and microbiological contamination control.

DUPONT PAGE HEADNOTE: Please substitute your size for XX when ordering. See p. 31 for full part number description.NOTE: Please substitute your size for XX when ordering. See p. 31 for full part number description.

NOTE: All sizes not available in all styles. For universal sizing use 00 in the part number.

Seams and closures have less barrier than fabric.

WARNING: Cleanroom apparel should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Cleanroom fabrics should have slip-resistant materials on the outer sole of boots, shoe covers or other garment surfaces in conditions where slipping could occur.

PART NUMBER GUIDEIC 253 B WH LG 0025 CSFabric type

Garment design

Seam type Color Size Case count

Options

DUPONT™ PROCLEAN®

DUPONT™ PROCLEAN®

• Microporous composite fabric • Non-hazardous liquid and dry

particulate barrier protection for cleanroom applications

• Serged seams

OPTION:

• 0B = Bulk packaged

Boot coverPC444SWHXX01000BSerged seamsCovered elastic openingElastic anklePVC sole18" heightWhite100/csMD, LG, XL

FrockPC270SWHXX00300BSerged seamsBound neckSet sleeveCovered elastic wristSnaps (5)White30/csSM, MD, LG, XL, 2X, 3X, 4X

HoodPC663SWHXX01000BSerged seamsFull faceBound hood openingBound tiesWhite100/csUniversal sizing (00)

FrockPC271SWHXX00300BSerged seamsBound neckSet sleeveCovered elastic wristZipper closureWhite30/csSM, MD, LG, XL, 2X, 3X, 4X

SleevePC500SWHXX02000BSerged seamsCovered elastic wrist, bicep18" lengthWhite200/csUniversal sizing (00)

CoverallPC143SWHXX00250BSerged seamsBound neckSet sleeveCovered elastic wrist, ankleZipper closureEnclosed elastic at backWhite25/csSM, MD, LG, XL, 2X, 3X, 4X

Coverall:PC143

19 Customer Service 1 800 931 3456 safespec.dupont.com www.ControlledEnvironments.DuPont.com

Page 20: DUPONT CONTROLLED ENVIRONMENTS...in pharmaceutical, medical device, biotech and electronic settings that require high standards for particle and microbiological contamination control.

NOTE: All sizes not available in all styles. For universal sizing use 00 in the part number.

Seams and closures have less barrier than fabric.

WARNING: Cleanroom apparel should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Cleanroom fabrics should have slip-resistant materials on the outer sole of boots, shoe covers or other garment surfaces in conditions where slipping could occur.

PART NUMBER GUIDEIC 253 B WH LG 0025 CSFabric type

Garment design

Seam type Color Size Case count

Options

NOTE: Please substitute your size for XX when ordering. See p. 31 for full part number description.

DUPONT™ SIERRA™

DUPONT™ SIERRA™

• Provides balance of bacteria and particle filtration efficiency and breathability

• 7" and 9" sizes available• Blue and white masks available

CHOOSE FROM THESE OPTIONS:

• 0S = Sterile: individually packaged and sterilized by gamma irradiation

• BH = 50/bag

Controlled environment maskML7360WHXX0250BHML7360WHXX02500S9" sizeBound Tyvek® tiesPleated Rayon outer facingMetal nose pieceWhite250/csUniversal sizing (00)

Anti-fog maskML7370WHXX0250BH9" sizeBound Tyvek® tiesPleatedRayon outer facingMetal nose pieceAdhesive at noseWhite250/csUniversal sizing (00)

Anti-fog maskML7300WHXX02500S7" sizeBound Tyvek® tiesPleatedRayon outer facingMetal nose pieceAdhesive at noseWhite250/csUniversal sizing (00)

General maskML7330BUXX0500BH7" sizeStretch ear loopsPleated Polypropylene outer facing Metal nose pieceBlue300 & 500/csUniversal sizing (00)

Mask:ML7360

20 Customer Service 1 800 931 3456 safespec.dupont.com www.ControlledEnvironments.DuPont.com

Page 21: DUPONT CONTROLLED ENVIRONMENTS...in pharmaceutical, medical device, biotech and electronic settings that require high standards for particle and microbiological contamination control.

DUPONT PAGE HEADNOTE: Please substitute your size for XX when ordering. See p. 31 for full part number description.NOTE: Please substitute your size for XX when ordering. See p. 31 for full part number description.

NOTE: All sizes not available in all styles. For universal sizing use 00 in the part number.

Seams and closures have less barrier than fabric.

WARNING: Cleanroom apparel should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Cleanroom fabrics should have slip-resistant materials on the outer sole of boots, shoe covers or other garment surfaces in conditions where slipping could occur.

PART NUMBER GUIDEIC 253 B WH LG 0025 CSFabric type

Garment design

Seam type Color Size Case count

Options

DUPONT™ GENERAL-PURPOSE PRODUCTS

ApronTY273BWHXX010000Bound seamsBound neckTies closureTyvek® ties at waistWhite100/csUniversal sizing (00)

SleeveQC500BYLXX02000BBound seamsTunneled elastic wristTychem® QC 18" lengthYellow200/csUniversal sizing (00)

Cleanroom face veilPP7410WHXX0150BHElastic head bandMetal nose pieceWhite150/csUniversal sizing (00)

SleeveDE500SBUXX01000SSerged seamsCovered elastic wrist, bicepHydroentangled polyester and cellulose18" lengthBlue100/csUniversal sizing (00)

Cleanroom face veilPP7400WHXX0150BHStainless steel snapsMetal nose pieceWhite150/csUniversal sizing (00)

Apron: TY273B

21 Customer Service 1 800 931 3456 safespec.dupont.com www.ControlledEnvironments.DuPont.com

Page 22: DUPONT CONTROLLED ENVIRONMENTS...in pharmaceutical, medical device, biotech and electronic settings that require high standards for particle and microbiological contamination control.

DUPONT PAGE HEADNOTE: Please substitute your size for XX when ordering. See p. 31 for full part number description.NOTE: Please substitute your size for XX when ordering. See p. 31 for full part number description.

GENERAL-PURPOSE PRODUCTS

WARNING: Cleanroom apparel should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Cleanroom fabrics should have slip-resistant materials on the outer sole of boots, shoe covers or other garment surfaces in conditions where slipping could occur.

MaskAT7511Polypropylene outer and inner facingEar loops PleatedBlue300/cs7"

Bouffant327424" elastic openingBlue750/csLG

Bouffant9303 Latex free 24" elastic openingWhite, blue250/cs

Beard cover9216Opening: approximately 18" stretched Elastic: approximately 13" stretchedLatex freeWhite250/cs

MaskAT7505-PPolypropylene inner and outer facingPleatedBlue300/cs with ties7"

Mask: AT7505-P

22 Customer Service 1 800 931 3456 safespec.dupont.com www.ControlledEnvironments.DuPont.com

Page 23: DUPONT CONTROLLED ENVIRONMENTS...in pharmaceutical, medical device, biotech and electronic settings that require high standards for particle and microbiological contamination control.

DUPONT PAGE HEADNOTE: Please substitute your size for XX when ordering. See p. 31 for full part number description.NOTE: Please substitute your size for XX when ordering. See p. 31 for full part number description.

GENERAL-PURPOSE PRODUCTS

WARNING: Cleanroom apparel should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Cleanroom fabrics should have slip-resistant materials on the outer sole of boots, shoe covers or other garment surfaces in conditions where slipping could occur.

Scrub top

23502T MD

23503T LG

23504T XL

23505T 2X

23506T 3X

UnisexShort sleeve V-neck Pockets (2 front)Blue 60/cs

Scrub pant

23602PE MD

23603PE LG

23604PE XL

23605PE 2X23606PE 3X

Latex free elasticUnisexPocket (1 back right)Blue60/cs

Scrub pant:23603PE

Scrub top:23503T

23 Customer Service 1 800 931 3456 safespec.dupont.com www.ControlledEnvironments.DuPont.com

Page 24: DUPONT CONTROLLED ENVIRONMENTS...in pharmaceutical, medical device, biotech and electronic settings that require high standards for particle and microbiological contamination control.

DUPONT PAGE HEADGENERAL-PURPOSE PRODUCTS

WARNING: Cleanroom apparel should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Cleanroom fabrics should have slip-resistant materials on the outer sole of boots, shoe covers or other garment surfaces in conditions where slipping could occur.

Astound® sterile gown9545BlueXL

Cover gown9841Non-sterile standard back downPolyester cuffRaglan sleeve25/cs LG

Lab coat2201LC MD, 39" length

2202LC LG, 41" length

2203LC XL, 43" length

2204LC 2X, 45" length

Traditional collarSnap frontKnit cuffsPockets (3)Blue25/cs

Lab coat2301LC MD, 39" length

2302LC LG, 41" length

2303LC XL, 43" length

2304LC 2X, 45" length

Traditional collarSnap frontKnit cuffs39" lengthPockets (3)White25/cs

Cover gown9482NNon-sterile standard back downRaglan sleevePolyester cuff25/csXL

Astound® sterile gown9515BlueLG

Isolation gown1100PGSewn seamsIsolation gown with full backTies at neckWaist beltElastic cuffYellow 100/csUniversal (00)

Astound® sterile gown:9545

24 Customer Service 1 800 931 3456 safespec.dupont.com www.ControlledEnvironments.DuPont.com

Page 25: DUPONT CONTROLLED ENVIRONMENTS...in pharmaceutical, medical device, biotech and electronic settings that require high standards for particle and microbiological contamination control.

DUPONT PAGE HEADNOTE: Please substitute your size for XX when ordering. See p. 31 for full part number description.NOTE: Please substitute your size for XX when ordering. See p. 31 for full part number description.

GENERAL-PURPOSE PRODUCTS

WARNING: Cleanroom apparel should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Cleanroom fabrics should have slip-resistant materials on the outer sole of boots, shoe covers or other garment surfaces in conditions where slipping could occur.

Sleeve599Single sleeveElastic wrist, bicep21.5" lengthIndividually packagedBlue 60/csUniversal (00)

Medical wrap40084012402440304036Basis weight 1.2 ounces/square yardBulk packed within a single transparent polylinerBlue

Shoe cover4875Fluid-resistantSkid-resistantLatex freeAvailable with or without skid-resistant tread Blue400/cs2X

Sleeve:599

25 Customer Service 1 800 931 3456 safespec.dupont.com www.ControlledEnvironments.DuPont.com

Page 26: DUPONT CONTROLLED ENVIRONMENTS...in pharmaceutical, medical device, biotech and electronic settings that require high standards for particle and microbiological contamination control.

NOTE: Please substitute your size for XX when ordering. See p. 31 for full part number description.

DUPONT™ PROSHIELD® BASIC

NOTE: All sizes not available in all styles. For universal sizing use 00 in the part number.

Seams and closures have less barrier than fabric.

WARNING: ProShield® Basic should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Garments made of ProShield® Basic fabric should have slip-resistant or anti-slip materials on the outer surface of boots, shoe covers, or other garment surfaces in conditions where slipping could occur.

PART NUMBER GUIDEIC 253 B WH LG 0025 CSFabric type

Garment design

Seam type Color Size Case count

Options

Lab coatPB219SBUXX00300BPB219SWHXX00300BSerged seamsKnit collarSet sleeveKnit cuffSnap closure (6 + 1 adjustable)Pockets (1 left chest pencil, 2 lower front)White, blue30/csSM, MD, LG, XL, 2X, 3X, 4X

FrockPB267SWHXX00300BSerged seamsMandarin collarSet sleeveKnit cuffEnclosed elastic wristSnap closure (6 + 1 adjustable)White30/csSM, MD, LG, XL, 2X, 3X, 4X

DUPONT™ PROSHIELD® BASIC

• Made from polypropylene SMS fabric• Fabric resists non-hazardous dry

particle penetration• Air permeability helps keep wearer

comfortable• Serged seams• Available in blue and white

OPTION:

• 0B = Bulk packaged

Lab coat:PB219S

26 Customer Service 1 800 931 3456 safespec.dupont.com www.ControlledEnvironments.DuPont.com

Page 27: DUPONT CONTROLLED ENVIRONMENTS...in pharmaceutical, medical device, biotech and electronic settings that require high standards for particle and microbiological contamination control.

DUPONT PAGE HEADNOTE: Please substitute your size for XX when ordering. See p. 31 for full part number description.NOTE: Please substitute your size for XX when ordering. See p. 31 for full part number description.

DUPONT™ TYCHEM® QC

TYCHEM® QC

• Light liquid splash protection• Used extensively in the petroleum;

pulp and paper; food and chemical processing; and pharmaceutical industries

• Tychem® QC is polyethylene-coated Tyvek® fabric

• Flexible, durable and lightweight• Tychem® QC provides at least

30 minutes of protection against >40 chemical challenges

• When used with masks and gloves, can help reduce the risk of cross-contamination in pandemic preparedness activities

Coverall:QC122SYL

NOTE: All sizes not available in all styles. For universal sizing use 00 in the part number. Seams and closures have less barrier than fabric.1These Tychem® garments have attached socks made of the garment material. These attached socks must be worn inside protective outer footwear and are not suitable as outer footwear. These attached socks do not have adequate durability or slip resistance to be worn as the outer foot covering.

WARNING: Tychem® should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Only Tychem® ThermoPro, Tychem® Reflector® and Tychem® TK styles 600T/601T (with aluminized outer suit) garments are designed and tested to help reduce injury during escape from a flash fire. Users of Tychem® ThermoPro, Tychem® Reflector® and Tychem® TK styles 600T/601T (with aluminized outer suit) garments should not knowingly enter an explosive environment. Consult the Tychem® user manual, located on our website, for instructions on proper use, care and maintenance of your Tychem® garments.

PART NUMBER GUIDEIC 253 B WH LG 0025 CSFabric type

Garment design

Seam type Color Size Case count

Options

CoverallQC122BYLXX001200 Bound seamsAttached hoodFront zipper closureStorm flap with tape closureElastic wristAttached socks¹MD, LG, XL, 2X, 3X, 4X, 5X, 6X

CoverallQC127BYLXX001200Bound seamsAttached hoodFront zipper closureStorm flapElastic wristElastic ankleSM, MD, LG, XL, 2X, 3X, 4X, 5X, 6X, 7X

CoverallQC127SYLXX001200Attached hoodFront zipper closureElastic wristElastic ankleSM, MD, LG, XL, 2X, 3X, 4X, 5X, 6X, 7X

CoverallQC120SYLXX001200CollarFront zipper closureSM, MD, LG, XL, 2X, 3X, 4X, 5X, 6X, 7X

27 Customer Service 1 800 931 3456 safespec.dupont.com www.ControlledEnvironments.DuPont.com

Page 28: DUPONT CONTROLLED ENVIRONMENTS...in pharmaceutical, medical device, biotech and electronic settings that require high standards for particle and microbiological contamination control.

DUPONT PAGE HEADNOTE: Please substitute your size for XX when ordering. See p. 31 for full part number description.NOTE: Please substitute your size for XX when ordering. See p. 31 for full part number description.

DUPONT™ TYCHEM® QC

NOTE: All sizes not available in all styles. For universal sizing use 00 in the part number. Seams and closures have less barrier than fabric.1These Tychem® garments have attached socks made of the garment material. These attached socks must be worn inside protective outer footwear and are not suitable as outer footwear. These attached socks do not have adequate durability or slip resistance to be worn as the outer foot covering.

WARNING: Tychem® should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Only Tychem® ThermoPro, Tychem® Reflector® and Tychem® TK styles 600T/601T (with aluminized outer suit) garments are designed and tested to help reduce injury during escape from a flash fire. Users of Tychem® ThermoPro, Tychem® Reflector® and Tychem® TK styles 600T/601T (with aluminized outer suit) garments should not knowingly enter an explosive environment. Consult the Tychem® user manual, located on our website, for instructions on proper use, care and maintenance of your Tychem® garments.

PART NUMBER GUIDEIC 253 B WH LG 0025 CSFabric type

Garment design

Seam type Color Size Case count

Options

CoverallQC125SYLXX001200CollarFront zipper closureElastic wristElastic ankleMD, LG, XL, 2X, 3X, 4X, 5X, 6X, 7X

CoverallQC125BYLXX001200CollarFront zipper closureStorm flap with tape closureElastic wristElastic ankleSM, MD, LG, XL, 2X, 3X, 4X, 5X, 6X

ApronQC278BYLXX001200Bound seamsBound yoke neck without snapsSleeved apronWaist tiesElastic wrist52" long

ApronQC275BYLXX002500Bound seamsWaist tiesElastic openingKnee length apron/gownOpen back44" long

CoverallQC122SYLXX001200 Attached hoodFront zipper closureElastic wristAttached socks¹SM, MD, LG, XL, 2X, 3X, 4X, 5X, 6X, 7X only available in yellow bulk packaged

28 Customer Service 1 800 931 3456 safespec.dupont.com www.ControlledEnvironments.DuPont.com

Page 29: DUPONT CONTROLLED ENVIRONMENTS...in pharmaceutical, medical device, biotech and electronic settings that require high standards for particle and microbiological contamination control.

DUPONT PAGE HEADNOTE: Please substitute your size for XX when ordering. See p. 31 for full part number description.NOTE: Please substitute your size for XX when ordering. See p. 31 for full part number description.

DUPONT™ TYCHEM® SL

NOTE: All sizes not available in all styles. For universal sizing use 00 in the part number. Seams and closures have less barrier than fabric.1These Tychem® garments have attached socks made of the garment material. These attached socks must be worn inside protective outer footwear and are not suitable as outer footwear. These attached socks do not have adequate durability or slip resistance to be worn as the outer foot covering.

WARNING: Tychem® should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Only Tychem® ThermoPro, Tychem® Reflector® and Tychem® TK styles 600T/601T (with aluminized outer suit) garments are designed and tested to help reduce injury during escape from a flash fire. Users of Tychem® ThermoPro, Tychem® Reflector® and Tychem® TK styles 600T/601T (with aluminized outer suit) garments should not knowingly enter an explosive environment. Consult the Tychem® user manual, located on our website, for instructions on proper use, care and maintenance of your Tychem® garments.

PART NUMBER GUIDEIC 253 B WH LG 0025 CSFabric type

Garment design

Seam type Color Size Case count

Options

CoverallSL122BWHXX001200

Bound seamsSL122TWHXX000600Taped seamsAttached hoodFront zipper closureStorm flap with tape closureElastic wristAttached socks¹SM, MD, LG, XL, 2X, 3X, 4X, 5X, 6X, 7X

CoverallSL125BWHXX001200Bound seamsCollarFront zipper closureStorm flap with tape closureElastic wristElastic ankleSM, MD, LG, XL, 2X, 3X, 4X, 5X, 6X for 00 optionSM, MD, LG, XL, 2X, 3X, 4X for PI option

Apron SL278BWHXX001200Bound seamsBound yoke neck without snapsAttached long sleevesWaist tiesElastic wrist52" longUniversal (00)

CoverallSL127TWHXX000600 Taped seamsAttached hoodFront zipper closureStorm flap with tape closureElastic wristElastic ankleSM, MD, LG, XL, 2X, 3X, 4X, 5X, 6X, 7X

TYCHEM® SL

• Effective protection against a range of chemicals

• Rugged and durable• Tychem® SL is white for high

visibility • Tychem® SL provides at least

30 minutes of protection against >120 chemical challenges

• When used with masks and gloves, can help reduce the risk of cross-contamination in pandemic preparedness activities

ApronSL275TWHXX002500 Taped seamsRaw edge neck with snapsAttached long sleevesWaist tiesElastic wrist44" long SM-4X

Coverall:SL122T

29 Customer Service 1 800 931 3456 safespec.dupont.com www.ControlledEnvironments.DuPont.com

Page 30: DUPONT CONTROLLED ENVIRONMENTS...in pharmaceutical, medical device, biotech and electronic settings that require high standards for particle and microbiological contamination control.

NOTE: Please substitute your size for XX when ordering. See p. 31 for full part number description.

DUPONT™ TYCHEM® THERMOPRO

ApronTP284TORXX000400TP284TGYXX000400Taped seamSleeveless apronWaist strapOrange, gray4/csSM, MD, LG, XL, 2X, 3X, 4X

TYCHEM® THERMOPRO• Provides triple hazard protection

from chemicals, flash fire and electric arc, combining the trusted chemical protection of DuPont™ Tychem® with the flame and arc flash protection of DuPont™ Nomex® into a single garment

• Constructed for heavy use, yet lightweight and easy to wear

• Tychem® ThermoPro provides at least 30 minutes of protection against >180 chemical challenges

Apron:TP284TOR

NOTE: All sizes not available in all styles. For universal sizing use 00 in the part number. Seams and closures have less barrier than fabric.

WARNING: Tychem® should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Only Tychem® ThermoPro, Tychem® Reflector® and Tychem® TK styles 600T/601T (with aluminized outer suit) garments are designed and tested to help reduce injury during escape from a flash fire. Users of Tychem® ThermoPro, Tychem® Reflector® and Tychem® TK styles 600T/601T (with aluminized outer suit) garments should not knowingly enter an explosive environment. Consult the Tychem® user manual, located on our website, for instructions on proper use, care and maintenance of your Tychem® garments.

PART NUMBER GUIDEIC 253 B WH LG 0025 CSFabric type

Garment design

Seam type Color Size Case count

Options

30 Customer Service 1 800 931 3456 safespec.dupont.com www.ControlledEnvironments.DuPont.com

Page 31: DUPONT CONTROLLED ENVIRONMENTS...in pharmaceutical, medical device, biotech and electronic settings that require high standards for particle and microbiological contamination control.

HOW TO INTERPRET DUPONT PRODUCT PART NUMBERS

IC253BWHLG0025CSOur “smart” part numbers are not just a random collection of characters. Each component of the 16-character DuPont part number has meaning. When combined, these components provide a wealth of important product information, as shown here.

IC 253 B WH LG 0025 CSFabric type

The first two characters are the fabric description.

AbbreviationsSL Tychem® SLTP Tychem® ThermoProTY Tyvek®

IC IsoClean®

GE General Environment

PC ProClean®

CC Tyvek® Micro-Clean® 2-1-2

PE SureStep™

DT Dura-Trac™

PP PolypropyleneML Sierra™ MaskQC Tychem® QCDE Hydroentangled

Polyester & Cellulose

99 Accessory

Garment design

DuPont offers a wide array of garment styles— from hoods to frocks and coveralls. Each garment style has a unique three-digit code.

Seam type

The final character in the base number denotes the seam construction of the garment.

AbbreviationsB bound S serged 0 no seamT taped

Color

Several DuPont fabrics are available in color options; refer to catalog descriptions for details.

AbbreviationsWH white BU blueYL yellowOR orangeGY gray

Size

Many DuPont garments are available in a range of sizes; refer to catalog descriptions for details.

AbbreviationsSM smallMD mediumLG largeXL extra large2X 2 extra large3X 3 extra large4X 4 extra large5X 5 extra large6X 6 extra large7X 7 extra large8X 8 extra large00 universal

sizing

Case count

Provides the number of garments per case; refer to catalog descriptions for details.

Options

For example, 0S designates sterilized and P I designates individually packaged. Not all option codes are available for all products; refer to catalog descriptions for details.

AbbreviationsCS clean & sterile 0S sterile oC clean-processed P I individually

packaged 0B bulk 00 bulk BB 50/box BH 50/bag

Height Sizes5'0" 5'2" 5'4" 5'6" 5'8" 5'10" 6'0" 6'2" 6'4" 6'6" 6'8" 6'10" 7'0" 7'2" 7'4" 7'6" 7'8" Small

Ches

t

32" Medium34" Large36" X-large38" 2X-large40" 3X-large42" 4X-large44" 5X-large46" 6X-large48" 7X-large50" 8X-large52"54"56"58"60"62"64"66"68"70"72"

SIZING CHART FOR DUPONT CONTROLLED ENVIRONMENTS GARMENTSUse this chart to determine what size garment is right for you. Sizes are based on an individual’s height and chest size.

31 Customer Service 1 800 931 3456 safespec.dupont.com www.ControlledEnvironments.DuPont.com

Page 32: DUPONT CONTROLLED ENVIRONMENTS...in pharmaceutical, medical device, biotech and electronic settings that require high standards for particle and microbiological contamination control.

Copyright © 2015 DuPont. All rights reserved. The DuPont Oval Logo, DuPont™, Dura-Trac™, Gripper™, IsoClean®, Micro-Clean®, Nomex®, ProClean®, Sierra™, SureStep™, Tychem® and Tyvek® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. K-17384-2 (08/15)

Astound® is a registered trademark of Cardinal Health.

LATEX STATEMENT: As of January 1, 2006, DuPont production specifications exclude use of components containing natural rubber latex in the manufacture of DuPont™ Tyvek® IsoClean®, Sierra™, and ProClean® garments.

Tyvek® Plus contains natural rubber latex which may cause allergic reactions in some sensitized individuals. Anyone who begins to exhibit an allergic response during the use of DuPont products should immediately cease using these products.

DuPont production specifications for Gripper™ PVC exclude use of latex. Notwithstanding, DuPont cannot guarantee the absence of latex in these shoe or boot covers.

Anyone who begins to exhibit allergic response during the use of DuPont products should immediately cease using these products. The incident should also be reported to DuPont at 1 800 441 3637.

SILICONE STATEMENT: In the past, DuPont has found that threads and zippers can be the most significant source of silicone oil contamination in garments. DuPont specifies that threads and zippers used in Tyvek® IsoClean®, and ProClean® garments be manufactured without the use of silicone oils. Notwithstanding, DuPont cannot guarantee the absence of silicone oils on these garments.

For end users with concerns about contamination with silicone oils or any other contaminants, the best practice is to audit inbound materials, including garments for those contaminants.

This information is based upon technical data that DuPont believes reliable. It is subject to revision as additional knowledge and experience are gained. DuPont makes no guarantee of results and assumes no obligation or liability in connection with this information. It is the user’s responsibility to determine the level of toxicity and the proper personal protective equipment needed. The information set forth herein reflects laboratory performance of fabrics, not complete garments, under controlled conditions. It is intended for information use by persons having technical skill for evaluation under the specific end-use conditions, at their own discretion and risk.

Anyone intending to use this information should first verify that the garment selected is suitable for the intended use. In many cases, seams and closures may provide less barrier than the fabric. If the fabric becomes torn, abraded or punctured, end user should discontinue use of garment to avoid compromising the barrier protection. SINCE CONDITIONS OF USE ARE OUTSIDE OUR CONTROL, WE MAKE NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, NO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE AND ASSUME NO LIABILITY IN CONNECTION WITH ANY USE OF THIS INFORMATION. This information is not intended as a license to operate under or a recommendation to infringe any patent, trademark or technical information of DuPont or others covering any material or its use.

1) DuPont garments and accessories for controlled environments are not flame-resistant and should not be used around heat, flame, sparks or in potentially flammable or explosive environments. 2) Garments made of Tyvek® should have slip-resistant or antislip materials on the outer surface of boots, shoe covers or other garment surfaces in conditions where slipping could occur.

For DuPont Controlled Environments apparel and accessories, visit safespec.dupont.com


Recommended