1
A BRITE CO. www.abrite.com Phone: 214-291-0400; 1-888-8ABRITE Fax: 214-291-0300 E-maih [email protected] TRIDIP CR-1 is a specially formulated one-com- ponent liquid trivalent chromate conversion coat- ing for all electrodeposited zinc surfaces. It bright- ens and passivates zinc surfaces, leaving a pro- nounced blue-bright film. TRIDIP CR-1, when properly applied, provides a finish that produces less than 5% white salts after 150 hours of neutral salt spray. This exceeds auto industry specifica- tions (GME-00252 and GMW-3044C). Top coat with a BriteGuard posttreatment process offers a minimum of 350 hours of protection. Circle 001 on reader service card AIROGAP CO. www.airogap.com Phone: 1-800-424-1449 Fax: 708-424-1478 E-mail: [email protected] Airogap's Kathy Cleaner removes years of accu- mulated dirt buildup and cleans the entire convey- or (power chain, pusherdogs, and carrier) during production, reducing downtime. The strategically designed, individual brush systems continuously dean all critical surfaces. The cleaner minimizes contamination, optimizes electrostatic grounding, restores control over mil-thickness deposition, cuts excessive overspray, reduces rejects, and greatly extends chain, trolly, and carrier life.Airogap's com- plete family of cleaners is easily installed. Installation is also available. Circle 003 on reader service card DYNAPOWER & RAPID POWER CORE. www.dynapower.com www.rapidpower.com Phone: 1-800-292-6792 Fax: 802-864-3782 Email: info @dynapower.corn Dynapower & Rapid Power Corp. offer the latest generation of fully sealed, high-frequency switchmode DC power supplies. Our switch- modes are highly efficient in a NEMA 4X stain- less steel compact enclosure. The sleek styling and distinctive appearance blend technology and functionality into a user-friendly, precision- output, high-tech package. Circle 014 on reader service card PINNACLE TECHNOI.,OGIES www.pinnacletechnologies.com Phone: 201-891-7049 Fax: 201-891-7930 E-mail: debbie @ pinnacletechnologies.corn Pinnacle Technologies is more than just a manu- facturer of robotic finishing cells. Because we understand thefinishing process, we are the ideal partner for your business. Our robotic cells incor- porate the state-of-the-art force control units for buffing and polishing. We have developed a true off-line programming system incorporating laser gauging and calibration for parts requiring a high degree of accuracy for functional finishes such as turbine blades and orthopedic products. Circle 070 on reader service card DUPONT POWDER COATINGS www.dupontpowerder.com S Phone: 713-939-4000 Fax: 713-939-4027 E-mail: benson @ DuPontPowder.com DuPont Powder Coatings offers a broad range of high-temperature-resistant coatings ideal for barbecue grills. DuPont has also introduced coatings that perform in the 800 to 1,000°F range required for muffler and stove coatings. Ongoing research is providing improvements in powder handling and transfer efficiency. Due to continuous advancements in technology, please contact your DuPont Powder Coatings sales rep- resentative for the most current high-temperature- resistant products and for product availability. See us at Coating 2005, booth #1217. Circle 013 on reader service card IMSM www.imsm.com Phone: 630-240-5050 Fax: 630-960-1935 E-maih [email protected] Operating in five continents, IMSM adds value to businesses through Quality, Environmental, Health & Safety; and Information Security man- agement systems. Fixed fees, fixed timeframes without red tape, and unnecessary paperwork results in an efficient system specific to your business. Full service consultancy--certification available. Turnkey programs. Small business specialists in ISO9001:2000, ISO14001, TS16949, AS9100, OHSAS 18001, and ISO/IEC 17799. Circle 018 on reader service card PROTECTAIRE FINISHING SYSTEMS www.protectaire.com Phone: 1-866-615-8347 Fax: 847-697-1065 E-maih MikeN@ protectaire.com Our nanotechnology coated industrial washers and ovens provide insulation value up to R-13 with three mils of the patented coating, making them the world's best when it comes to thermal insula- tion. The result is increased equipment life and reduced energy costs, and greatly reduced initial cost. Available in fully installed turnkey units, or our nanotechnology coating can be added to your existing machinery. Guaranteed for 10 years. Circle 053 on reader service card PROTECTAIRE FINISHING SYSTEMS www.protectaire.com Phone: 1-866-615-8347 Fax: 847-697-1065 E-mail: MikeN @ protectaire.com Protectaire has been a leader in environmental room innovation. Our modular rooms isolate the powder coating process to reduce product-finish- ing defects and maintain end-result consistency. Our two (2) existing patented features and our pro- prietary control system (patent pending) effective- ly control both temperature and humidity. It can be retrofitted to existing rooms or included with new turnkey modular units. Circle 054 on reader service card 2 MF Product News
