DurwenServicePlus Technology

Multiple Pallet Handlers -Designed for qualityserviceability

Durwen ServicePlus

Technology that sets new

standards in :

Economic efficiency

Durability

and Service

Long and unplanned downtimes are lost profit...A good reason for Durwen ServicePlus Technology.

DSP-Technology is the Durwen ServicePlusperformance that gives maximum utilisationwith a minimum of maintenance and repaircost.

DSP-Technology allows quick and easy partsreplacement by means of bolted modularkey components.

DSP-Technology means:

- many common parts

- wear parts with a first rate service life

- reduced maintenance costs

- excellent product service life

- extended maintenance intervals

- reduced maintenance work

- maximum efficiency

The Durwen ServicePlus package is basedupon decades of Expertise - Know How thatbenefits customers because DSP-Technologyis extra profit without extra costs.

DSP-Technology means short, managedmaintenance intervals and reasonably pricedreplacement spare parts.

DSP-Technology is enhancedprofit technology.

Using DSP-Tech-nology

With a few toolsand a few minutesall parts of a dou-ble pallet handlercan be exchanged.

Fork replacement

Remove bolts, changefork, tighten boltswith torque spanner

Job time 20 mins

Bushing replacement

Remove cylinder joints,remove complete arm,exchange bushing, in-sert arm, tighten bolts.

Job time 30 mins

Sideshift top-slidereplacement

Remove unit fromtruck, remove slidebolts, assemble withnew slide, mount unit

Job time 20 mins

Sideshift bottom-slide replacement

Remove unit fromtruck, remove slidebolts, assemble withnew slide, mount unit

Job time 20 mins

Open cylinder

Remove twin hole nut,pull out piston rod

Job time 10 mins

Seal kit replacement

Remove nut, strippiston parts, replaceseals, and re-assemble

Job time 30 mins

Gas spring replace-ment

Remove stop bolt,remove circlips, pullout gas spring, re-assemble

Job time 15 mins

Lower arm carrierreplacement

Remove stop bolt,remove fork bolts, pullout carrier, re-assemble

Job time 15 mins

Inner axle replace-ment

Remove lock nut, pullout axle, fit new axle,tighten lock nut

Job time 10 mins

Inner fork carrierreplacement

Remove fork, removespring housing, pullaxle as far as needed,exchange carrier

Job time 25 mins

Valve replacement

Remove hoses, remo-ve bolts, exchangevalve, reassemble

Job time 15 minsAs few components as possible.As robust as possible.As easy to maintain as possible.As flexible and durable as possible.Giving our customers considerable advantages incost efficiency.

Innovation award

The name Durwen stands for Quality and Serviceover an extensive range of products

A glance at the Durwen range of products:

- Double pallet handler DPK 22 - 40 / 45 - 100 C- Triple pallet handler DRPK - 30 - 45 C- 4/6 pallet handler MPG 80- Load extending double pallet handler VDPK - 45 C

- Fork clamp UZ / GK, revolving DUZ / GKD - Block clamp UVA and slip on arms- Turning fork clamp DGK- Pulp clamp UZK- Bale clamp UBK- Paper roll clamp RKS / RKB- Appliance clamp UKKS / UKKP- Pallet inverter PWK- Mesh-box discharger DGE- Drum clamp UFK / revolving D-UFK

- Fork positioner, clamp type UZV-C- Fork positioner, round bar type WZV / ZV / ZVI- Fork positioner, rotating type 360° DZV- Fork positioner, rotating type 360° DZV 869

- Sideshift S109- Heavy duty sideshift HS- Integrated sideshift SSI- Double and triple sideshift DST / DRST

- Extending forks TGZcombined with fork positioner TGZ 869

- Pusher fork SGS- Load extender VGT

- 360° rotator DG 305 / 301

- Hydraulic buckets for agricultural goods LSCH- Hydraulic buckets for mineral goods SCH- Hydraulic buckets for heavy duty use GSCH- Mechanical buckets MS

- Crane jib, fork mounted KFG and telescopic KFTG

- Carrige mounted KF and telescopic KFT- Swiveling KS and telescopic KST

- Carpet boom 42 / 30 TTD- Coil boom TD- Fork extensions GVS / GVL

- Load stabiliser LH- Snow plough SSV / SSF- Hang on carriage VG / man basket AB

- Masts, simplex / duplex / triplex / quadruplex

- ISO 2328 steel profile

Double pallet handler for 1 or 2 palletsModel DPK - C, Durwen ServicePlus Technology

All models with sideshift as standard

Available for 1,5 to 5 ton lift truck capacity

Double pallet handler for 2 or 4 palletsModel DPK - C, Durwen ServicePlus Technology

With long forks for loading from one side

All models with sideshift as standard

Available for 4,5 to 10 ton lift truck capacity

Triple pallet handler for 1, 2 or 3 palletsModel DRPK - C, Durwen ServicePlus Technology

All models with sideshift as standard

Available for 2,5 to 10 ton lift truck capacity

Four or eight pallet handler for 2-3-4 or6-8 palletsModel VPK/APK-C, Durwen ServicePlusTechnology

All models with sideshift as standard

Model APK –C for loading from one side

Available for 5 to 8 ton lift truck capacity

Load extending double pallet handler for 1 or 2pallets. Model VDPK - C, Durwen ServicePlusTechnology

All models with sideshift as standard

For loading from one sideAvailable for 4,5 to 10 ton lift truck capacity

Also available for 1,2 or 3 pallets,model VDRPK - B

Durwen Maschinenbau GmbH · August-Horch-Str. 5, D-56637 Plaidt · Tel.: +49 (0) 26 32 - 70 00-0 · Fax +49 (0) 26 32 - 7 2715 · info@durwen.de · www.durwen.de

11/1

0

your local distributor: