+ All Categories
Home > Documents > DUST PARTICLE SUPPRESSION - OZmist€¦ · tube system. Compression ˝ttings and tube saddles are...

DUST PARTICLE SUPPRESSION - OZmist€¦ · tube system. Compression ˝ttings and tube saddles are...

Date post: 20-Jul-2020
Category:
Upload: others
View: 2 times
Download: 0 times
Share this document with a friend
2
DUST PARTICLE SUPPRESSION OZmist Dust Suppression Systems are an extremely cost effective and efficient way of controlling fugitive dust. They are simple in operation, have a low operating cost, are easily installed, will not have any detrimental effects on machinery and will not wet floors or machinery. All OZmist dust suppression systems utilise a high pressure pump module connected to a series of mist lines & nozzles. The pump module pressurises tap water to 70 bar. As the water passes through the nozzle it is broken into millions of tiny water droplets that average 10 microns in size. As the ultra fine droplets fall, they attach themselves to airborne dust particles and knock them out of the air. TOTAL CLIMATE SOLUTIONS ® WHY SHOULD YOU CHOOSE OZMIST? EASILY INSTALLED CAN BE RETROFITTED NO AREA TOO BIG ODOUR NEUTRALISING A 26 Rowan Street, Wangaratta VIC 3677 T 1300 306 478 E [email protected] W ozmist.com.au OVER 17 YEARS EXPERIENCE AUSTRALIAN MANUFACTURER WORLD CLASS PRODUCTS CUSTOMER SUPPORT CUSTOM SOLUTIONS TOTAL CLIMATE SOLUTIONS ® FOR CUSTOM SOLUTIONS 1300 306 478 CONTACT US TODAY The OZmist stainless steel tube system is the strongest on the market and no more expensive than nylon tube systems from other suppliers. Our atomisation lines are constructed from pre cut and machined 304 grade stainless steel tube. The chrome plated fittings are machined from brass and have an internal O ring and an external grub screw that locks into the tube groove ensuring a leak and twist free connection. Mist lines are fixed to the underside of trusses or secured to continary wires run between the walls. Nozzles simply screw into the unions between the tubes. AIRSTREAM AIRSTREAM Dust particles stick to ultra fine droplets OZmist ULTRA FINE DROPLET OZMIST MISTING SYSTEM AIRSTREAM AIRSTREAM Dust particles are pushed and swept around larger water droplets Large Water Droplet REGULAR MISTING SYSTEM WE ALSO SUPPLY A DOSING MODULE WHICH DELIVERS A PRECISE AMOUNT OF ODOUR NEUTRALISING AGENT TO THE MIST.
Transcript
Page 1: DUST PARTICLE SUPPRESSION - OZmist€¦ · tube system. Compression ˝ttings and tube saddles are supplied to use with the nylon tube. + + + OZmist industrial pump modules are manufactured

DUST PARTICLESUPPRESSIONOZmist Dust Suppression Systems are anextremely cost e�ective and e�cient way of controlling fugitive dust. They are simple inoperation, have a low operating cost, are easily installed, will not have any detrimental e�ects on machinery and will not wet �oors or machinery.

All OZmist dust suppression systems utilise a high pressure pump module connected to a series of mist lines & nozzles. The pump module pressurises tap water to 70 bar. As the water passes through the nozzle it is broken into millions of tiny water droplets that average 10 microns in size. As the ultra �ne droplets fall, they attach themselves to airborne dust particles and knock them out of the air.

TOTAL CLIMATE SOLUTIONS

®

WHY SHOULD YOU CHOOSE OZMIST?

EASILY INSTALLED

CAN BE RETROFITTED

NO AREA TOO BIG

ODOUR NEUTRALISING

A 26 Rowan Street,Wangaratta VIC 3677 T 1300 306 478 E [email protected] W ozmist.com.au

OVER 17 YEARS EXPERIENCE AUSTRALIAN MANUFACTURER WORLD CLASS PRODUCTS CUSTOMER SUPPORT CUSTOM SOLUTIONS

TOTAL CLIMATE SOLUTIONS

®

FOR CUSTOM

SOLUTIONS1300 306 478

CONTACT US TODAY

The OZmist stainless steel tube system is the strongest on the market and no more expensive than nylon tube systems from other suppliers.

Our atomisation lines are constructed from pre cut and machined 304 grade stainless steel tube. The chrome plated �ttings are machined from brass and have an internal O ring and anexternal grub screw that locks into the tube groove ensuring a leak and twist free connection. Mist lines are �xed to the underside of trusses or secured to continary wires run between the walls. Nozzles simply screw into the unions between the tubes.

AIRSTREAM AIRSTREAM

Dust particles stick to ultra �ne droplets

OZmist ULTRAFINE DROPLET

OZMIST MISTING SYSTEM

AIRSTREAM AIRSTREAM

Dust particles are pushed and swept around

larger water droplets

Large Water Droplet

REGULAR MISTING SYSTEM

WE ALSO SUPPLY A DOSING MODULE WHICH DELIVERS A PRECISE AMOUNT OF ODOUR

NEUTRALISING AGENT TO THE MIST.

Page 2: DUST PARTICLE SUPPRESSION - OZmist€¦ · tube system. Compression ˝ttings and tube saddles are supplied to use with the nylon tube. + + + OZmist industrial pump modules are manufactured

INSTALLATION& SPECSInstallation of an OZmist dust and odour suppression system is a relatively quick and simple process. Everything you need for your installation is included in the kit. We include a full installation and operating manual as well as phone support. Installation may also be available in some areas.

For quoting purposes, contact the design team atOZmist via email with photos of the area in question, and include area dimensions. We will then custom designa system for you and supply it in kit form.

TOTAL CLIMATE SOLUTIONS

®

WHY SHOULD YOU CHOOSE OZMIST?

A 26 Rowan Street,Wangaratta VIC 3677 T 1300 306 478 E [email protected] W ozmist.com.au

OVER 17 YEARS EXPERIENCE AUSTRALIAN MANUFACTURER WORLD CLASS PRODUCTS CUSTOMER SUPPORT CUSTOM SOLUTIONS

TOTAL CLIMATE SOLUTIONS

®

Misting lines are normally supplied in

pre-cut and machinedlengths of stainless steel

tube which work seamlessly with our

range of Quick Fit�ttings. We stock

kilometres of stainless steel tube and

thousands of �ttings so your system can be

supplied in the shortest time.

Alternatively we can supply nylon mist

lines and Push Lock�ttings. Supply linesbetween the pumpand mist lines are

normally run throughhigh pressure

nylon tube.

3/8” high pressure semi rigid nylon

tube connects the pump module to the

Quick Fit tube system.

Compression �ttings and tube saddles are supplied to use with

the nylon tube.

+++OZmist industrial

pump modules aremanufactured in

Australia using themost robust

components available.With minimal

maintenance they willgive years of trouble

free service.Larger modules areavailable in singleand three phase.

We are that con�dent that we o�er a 2 year warranty on industrialpump modules. Our

modules are fabricatedfrom stainless steel

and �tted with dual water �ltration as wellas low water pressure

protection.

OZmist manufactures the odour doseunit for use with our industrial pump

modules. The odour dose module contains a electronic persitalic dosingpump, capable of introducing minuteamounts of odour neutralising agents

into the water supply prior to the misting pump. There is space for a 5 litre chemicalcontainer inside the module. The odour dose also has a twin stage timer to start

and stop the dosing pump at set intervals.

GOT AN ODOUR PROBLEM?

FOR CUSTOM

SOLUTIONS1300 306 478

CONTACT US TODAY


Recommended