3
Sys
tem
Inf
orm
atio
nD
raw
er s
lides
Org
aniz
ing
syst
ems
Mou
ntin
g A
ids
Tech
nica
l In
form
atio
n
Dynamic NTConcealed roller bearing slides for 3 and 4 sided
wooden drawer boxes.
Single and full extension slides with integrated Soft-close soft closing system.Dynamic NT roller bearing slides convince through
superior running conditions:
With ease you can extend the drawer, and with a gentle
push the slides glide back into the closed position.
Soft-close slows your drawer softly down and closes it
quietly until it stops.
The Dynamic NT is a unique element in your cabinet
that your customer will appreciate.
Dynamic NT means innovation in drawer slidetechnology.New features of the Dynamic principle guarantee excel-
lent running conditions and side stability.
Dynamic NT full extension slides with 40 kg load capa-
city cover all requirements that are needed when using
an undermount slide on a wooden drawer box.
Dynamic NT undermount slides, precise anddependable.• Soft and controlled closing of the drawer through
Soft-close technology
• 40 kg load capacity with all Dynamic NT
full extension slides
• Height adjustment within the front bracket
• The integrated tolerance compensation compensates
side tolerance of the cabinet with ease
• System compatibility,single and full extension are
completely interchangeable.
• Efficient installation with slide-on mounting
4
Concealed full extension slide, 40 kg Slide-on mounting with integrated
Soft-close or Self-close.
� Carrying capacity for excessive lengths 30 kg dyn.
4 sided drawer 3 sided drawer Inset drawer
Nominal length Ref. No. Soft-close Ref. No. Self-close
250 7012.250
270 7002.270
300 7002.300 7012.300
350 7002.350 7012.350
400 7002.400 7012.400
450 7002.450 7012.450
500 7002.500 7012.500
550 7002.550 7012.550
� 600 7002.600
� 650 7002.650
PU/Packing Unit PU 5 PU 5
VPE 5 = 5 pairs per box
Dynamic NT Full extension, 40 kg
Ref. No. Ref. No.
(Please order separately) 7900.VE1AA 7900.VE10AA
PU/Packing Unit PU 1 PU 10
PU 1 = 1 set, l/rPU 10 = 10 set
Front fixing bracket with integrated height adjustment
• Full extension , 40 kg load capacity (based on 500 mm slide)• Soft-close soft closing system• Self-close, alternative • Self adjusting of drawer when sliding on slide • Integrated height adjustment, tool-less +2.5 mm
Dynamic NT Single extension Page 6 Mini Sidewing Page 10 Mounting Aids Page 14
Dynamic NT Tipmatic Plus Page 8 - 9 Magic Sorto Page 12 Technical Information Page 16
Accessories and Mounting Aids
5
Drawer Inset drawer
Zuschnittmaße Blendenprofil und Reling
Drawer installation measurements
Identical mounting positions for single and full extension slides.
Cabinet fixing positionsDrawer cut-outs and drillings
All measurements in millimeter.
NL Drawer length Min. installation depth
250 240 250
270 260 270
300 290 300
350 340 350
400 390 400
450 440 450
500 490 500
550 540 550
600 590 600
650 640 650
37
32
28
650
600
550
500
450
400
350
300
270
250
14
352
288
224
128
160
192
96
BackBack
LSB = Inside drawer widthLW = Inside cabinet width
Single extensionon page 6
Full extension
Front edge of cabinet
SK = Drawer lengthNL = Nominal length of slide
Sys
tem
Inf
orm
atio
nD
raw
er s
lides
Org
aniz
ing
syst
ems
Mou
ntin
g A
ids
Tech
nica
l In
form
atio
n
6
• Single extension , 30 kg load capacity (based on 500 mm slide)• Soft-close soft closing system• Self-close, alternative • Self adjusting of drawer when sliding on slide • Integrated height adjustment, tool-less +2.5 mm
Concealed single extension slide, 30 kg Slide-on mounting with integrated
Soft-close or Self-close.
4 sided drawer 3 sided drawer Inset drawer
Nominal length Ref. No. Soft-close Ref. No. Self-close
250 7512.250
300 7502.300 7512.300
350 7502.350 7512.350
400 7502.400 7512.400
450 7502.450 7512.450
500 7502.500 7512.500
550 7502.550 7512.550
PU/Packing Unit PU 10 PU 10
VPE 10 = 10 pairs per box
Dynamic NT Single extension, 30 kg
Ref. No. Ref. No.
(Please order separately) 7900.VE1AA 7900.VE10AA
PU/Packing Unit PU 1 PU 10
PU 1 = 1 set, l/rPU 10 = 10 set
Front fixing bracket with integrated height adjustment
Dynamic NT Full extension Page 4 Mini Sidewing Page 10 Mounting Aids Page 14
Dynamic NT Tipmatic Plus Page 8 - 9 Magic Sorto Page 12 Technical Information Page 16
Accessories and Mounting Aids
7
Drawer Inset drawer
Drawer installation measurements
Identical mounting positions for single and full extension slides.
Cabinet fixing positionsDrawer cut-outs and drillings
All measurements in millimeter.
NL Drawer length Min. installation depth Extension loss
250 240 250 52
300 290 300 52
350 340 350 63
400 390 400 63
450 440 450 74
500 490 500 96
550 540 550 107
37
18
28
550
500
450
400
350
300
250
14
288
128
9
224
160
192
96
BackBack
LSB = Inside drawer widthLW = Inside cabinet width
Single extension
Full extensionon page 4
Front edge of cabinet
SK = Drawer lengthNL = Nominal length of slide
Sys
tem
Inf
orm
atio
nD
raw
er s
lides
Org
aniz
ing
syst
ems
Mou
ntin
g A
ids
Tech
nica
l In
form
atio
n
8
Dynamic NT Tipmatic PlusThe full extension for handle-free furniture design.
Dynamic NT Full extension Page 4 Magic Sorto Page 12 Mounting Aids Page 14
Mini Sidewing Page 10 Technical Information Page 16
Accessories and Mounting Aids
• Top Grass running performance• Load capacity up to 40 kg• Tool-free height adjustment• Simple drawer insertion and removal• Convenient opening and closing of the drawer or pull-out by gently tapping at any point over
the entire width of the front.• The unique and synchronised locking mechanism makes closing the drawer a delightful
and satisfying experience for the user.• Comfortable access to drawer contents thanks to the large opening distance.
• Convenient front gap adjustment by means of eccentric element: ±1.5 mm
Dynamic NT Tipmatic Plus full extension
1
2
3
4
1
3
Nominal length Ref. No.
270 71090-03
300 71091-03
350 71092-03
400 71093-03
450 71094-03
500 71095-03
550 71096-03
PU/Packing Unit PU 5
VPE 5 = 5 pairs per box
Ref. No.
68257-04
PU 10 set
Connecting rod length 1079 mm
Synchronisation unit
4
Ref. No.
71115-03
PU 5 set
Locking set
Ref. No. Ref. No.
(Please order separately) 7900.VE1AA 7900.VE10AA
PU/Packing Unit PU 1 PU 10
PU 1 = 1 set, l/rPU 10 = 10 set
Front fixing bracket with integrated height adjustment2
9
Drawer
37325
9 9 9
21
9
12
24.5
10
17
37
4.5±1.5
SK = NL - 10
Minimum installation depth = NL + 26NL - 20
min. 12
21
35.5
4.5 (±1.5)
+
–
ICW - 97
2227
2760
Drawer length = Nominal length -10 mm
Installation depth = Nominal length + 26
Height adjustment+2.5 mm
7.3
270
160
224
128
192
288
96
250 ±0.3
280 ±0.3
330 ±0.3
380±0.3
430 ±0.3
480 ±0.3
530 ±0.3
300
350
400
450
500
550
2832
14
37
32
21
35.3
±0.3
Minimum installation depth = NL +26
35.3
±0.3
35.3
±0.3
35.3
±0.3
35.3
±0.3
35.3
±0.3
35.3
±0.3
Drawer installation measurements Assembly of front fixing brackets
Adapter drill holes
Cutting measurements for synchronisation bar
All measurements in millimeter.
Sys
tem
Inf
orm
atio
nD
raw
er s
lides
Org
aniz
ing
syst
ems
Mou
ntin
g A
ids
Tech
nica
l In
form
atio
n
Cabinet fixing positions
NL Drawer length Min. installation depth
270 260 296
300 290 326
350 340 376
400 390 426
450 440 476
500 490 526
550 540 576
Front gap adjustment
Front edge of cabinet
SK = Drawer lengthNL = Nominal length of slide
7.5
11.5
28.5
(21)
38
9.5
12
max. 16
min
5
10-1
3
±1.5mm
Inside cabinet width (ICW)
Ø6/11 deep
Inside drawer width = ICW-42
10
Magic Mini SidewingOrganizing system for tall wooden drawers.
Ref. No. alu-grey
12650
PU/Packing Unit PU 4
PU 4 = 4 pcs.
Magic Mini Sidewing
Cabinet width in mm Ref. No. alu-metallic
600 12700.495.17
1200 12700.1095.17
PU/Packing Unit PU 1/25
PU 1/25 = 1 set per bag / 25 sets per box
Magic Classic Dividing Set
Magic Dividing Set
600 mm
Magic Dividing Set
1200 mm
1 set for 600 cabinet width consists of:2 Length Rails 462 mm 2 Divider Rails 495 mm4 Fixing parts
1 set for 1200 cabinet width consists of:3 Length Rails 462 mm2 Divider Rails 1095 mm 6 Fixing parts
• Optimum space organisation for tall drawers• Tool-less mounting
• Adjustable elements for individual arrangement
possibilities• Easy to cut to size Aluminium Dividing Rails
Dynamic NT Full extension Page 4 Dynamic NT Tipmatic Plus Page 8 - 9 Technical Information Page 16
Dynamic NT Single extension Page 6
Accessories and Mounting Aids
11
Mounting measurements Magic Mini Side Wing
Magic Classic Dividing Set
Length Rail Divider Rail
Y
X
12
120
38
32
32
40
cut to size
Y = Drawer interior length -14 mm
Y
Drawer interior length
X = Drawer interior width -41 mm
Drawer interior width
X
All measurements in millimeter.
Sys
tem
Inf
orm
atio
nD
raw
er s
lides
Org
aniz
ing
syst
ems
Mou
ntin
g A
ids
Tech
nica
l In
form
atio
n
12
Magic SortoOrganizing system for wooden drawers.
NL 550 and cabinet widthsfrom 450 mm or more.
Consisting of:3 Sorto trays 270 x 90 mm3 Sorto trays 180 x 90 mm1 Divider Support
NL 550 and cabinet widthsfrom 600 mm or more.
Consisting of:4 Sorto trays 270 x 90 mm4 Sorto trays 180 x 90 mm1 Divider Support
Magic Sorto Set NL 550 B3 Magic Sorto Set NL 550 B41 2
Magic Sorto Set
Ref. No. alu-metallic
Magic Sorto set NL 550 B3 12039.550.17
Magic Sorto set NL 550 B4 12049.550.17
PU/Packing Unit PU 1
1
2
PU 1 = 1 set
Sorto trays: stainless steel, plastic parts light-grey Divider Support: alu-metallic, plastic parts light-grey
• Modular-based expandable system• Individual components, dishwasher resistant• Safe for foods, hygienically approved• Trays made of stainless steel, Divider supports
alu-metallic, plastic components alu-grey
Dynamic NT Full extension Page 4 Dynamic NT Tipmatic Plus Page 8 - 9 Technical Information Page 16
Dynamic NT Single extension Page 6
Accessories and Mounting Aids
13
Installation measurements for wide cabinets 400 and 450 mm depth Installation measurements for wide cabinets 500 and 550 mm depth
Installation measurements for small cabinets 400 und 450 mm depth Installation measurements for small cabinets 500 and 550 mm depth
Divider Support cut to size Sorto trays 180, 270 mm
Legend
All measurements in millimeter.
DIL
DIL -363 mm
362
65.5DIL
DIL -454 mm
362
65.5
DIL = DrawerInterior Length
271 181271 181
181
90.5
271.5
65
End Cap
Cut to size
Spring LoadedDivider Support
A Measure drawer interior length (DIL). Remove spring loaded end caps to aluminum.
B Cut aluminum bar (length = DIL -87 mm).
C Attach spring loaded end caps to aluminum profile.
D Cut wooden spacer.
DIL -87 mm
B
C
AD D
Sys
tem
Inf
orm
atio
nD
raw
er s
lides
Org
aniz
ing
syst
ems
Mou
ntin
g A
ids
Tech
nica
l In
form
atio
n
14
Mounting Aidsfor Dynamic NT.
Ref. No.
7990
PU 1
PU/Packing Unit 1 = 1 pc.
7990 Boring jig for rear hook and front fixing bracket borings
Ref. No.
7992
PU 1
PU/Packing Unit 1 = 1 set
1 set consisting of:
1 Shaft, 3 Drilling bit 2,5 mm, 1 Allen key
Drill bit
Drill bit for boring jig
7990
For rear hook and front fixing
bracket borings
Ø 2,5 mm
Ø 2,5 mm
Ø 6 mm
Dynamic NT Full extension Page 4 Dynamic NT Tipmatic Plus Page 8 - 9 Technical Information Page 16
Dynamic NT Single extension Page 6
Accessories and Mounting Aids
15
Sys
tem
Inf
orm
atio
nD
raw
er s
lides
Org
aniz
ing
syst
ems
Mou
ntin
g A
ids
Tech
nica
l In
form
atio
n
Ref. No. / Ø 6,3 x 10,5 mm Ref. No. / Ø 6,3 x 14 mm
191 192
PU 1000 PU 1000
PU/Packing Unit 1000 = 1000 pcs.
191 / 192 Euro screw, nickel plated
Ø 6
.3
Length Ø 7.1
Ref. No. / Ø 3,5 x 15 mm
198
PU 1000
PU/Packing Unit 1000 = 1000 pcs.
198 Wood screw, nickel plated
Ø 3
.5
15 Ø 7
Dynamic NT Tipmatic Plus drilling jig
for predrilling the fixing holes for lok-
king units.
Dynamic NT Tipmatic Plus drilling jig
for predrilling the fixing holes for the
back panel adapter.
Item No.
71098-01
PU 1 pcs.
Item No.
71097-01
PU 1 pcs.
Drilling jig for Dynamic NT Tipmatic Plus locking unit
Drilling jig for Dynamic NT Tipmatic Plus back panel adapter
2 x
2 x
1 x
NL 600
NL 550
NL 500
NL 450
NL 400
NL 600NL 350
NL 550NL 300
NL 400NL 450
NL 350NL 270
NL 300
NL 270NL 500
Drilling jig for cabinet slide
of Dynamic XP full extension
runner and Dxnamic NT.
Item No.
6926
PU 1 pcs.
Drilling jig
16
Drawer insertion
Height adjustment
Side tolerance
Information
Drawer removal
Place onto extended Dynamic NT
drawer slides and close.
Integrated tool-less height adjust-
ment up to 2.5 mm.
Side tolerance ±1,5 mm.
Extend drawer, press the lever
of the front fixing bracket and
remove the drawer from the
Dynamic NT slides.
Fixing of cabinet members:
The specified data is based on reference particle board according to DIN 68858, MDF and hardwood.If other types of woods and qualities are used, please consider the proper screw type as well as numbers of screws used.
Technical Informationfor Dynamic NT.
17
Sys
tem
Inf
orm
atio
nD
raw
er s
lides
Org
aniz
ing
syst
ems
Mou
ntin
g A
ids
Tech
nica
l In
form
atio
n
Notes
7117
2-00
–05
|200
9 –
5.00
0 (E
NG
) –G
RA
SS A
dver
tisi
ngA
ll er
rors
and
om
issi
ons
exce
pted
Grass GmbH Movement SystemsGrass Platz 1A 6973 Höchst, ÖsterreichTelefon +43 (0) 5578 701-0Telefax +43 (0) 5578 701-59E-Mail [email protected]