DYNAMIC NT SLIDE SYSTEM

Concealed roller bearing slides forsuperior wooden drawer boxes.

2

3

Sys

tem

Inf

orm

atio

nD

raw

er s

lides

Org

aniz

ing

syst

ems

Mou

ntin

g A

ids

Tech

nica

l In

form

atio

n

Dynamic NTConcealed roller bearing slides for 3 and 4 sided

wooden drawer boxes.

Single and full extension slides with integrated Soft-close soft closing system.Dynamic NT roller bearing slides convince through

superior running conditions:

With ease you can extend the drawer, and with a gentle

push the slides glide back into the closed position.

Soft-close slows your drawer softly down and closes it

quietly until it stops.

The Dynamic NT is a unique element in your cabinet

that your customer will appreciate.

Dynamic NT means innovation in drawer slidetechnology.New features of the Dynamic principle guarantee excel-

lent running conditions and side stability.

Dynamic NT full extension slides with 40 kg load capa-

city cover all requirements that are needed when using

an undermount slide on a wooden drawer box.

Dynamic NT undermount slides, precise anddependable.• Soft and controlled closing of the drawer through

Soft-close technology

• 40 kg load capacity with all Dynamic NT

full extension slides

• Height adjustment within the front bracket

• The integrated tolerance compensation compensates

side tolerance of the cabinet with ease

• System compatibility,single and full extension are

completely interchangeable.

• Efficient installation with slide-on mounting

4

Concealed full extension slide, 40 kg Slide-on mounting with integrated

Soft-close or Self-close.

� Carrying capacity for excessive lengths 30 kg dyn.

4 sided drawer 3 sided drawer Inset drawer

Nominal length Ref. No. Soft-close Ref. No. Self-close

250 7012.250

270 7002.270

300 7002.300 7012.300

350 7002.350 7012.350

400 7002.400 7012.400

450 7002.450 7012.450

500 7002.500 7012.500

550 7002.550 7012.550

� 600 7002.600

� 650 7002.650

PU/Packing Unit PU 5 PU 5

VPE 5 = 5 pairs per box

Dynamic NT Full extension, 40 kg

Ref. No. Ref. No.

(Please order separately) 7900.VE1AA 7900.VE10AA

PU/Packing Unit PU 1 PU 10

PU 1 = 1 set, l/rPU 10 = 10 set

Front fixing bracket with integrated height adjustment

• Full extension , 40 kg load capacity (based on 500 mm slide)• Soft-close soft closing system• Self-close, alternative • Self adjusting of drawer when sliding on slide • Integrated height adjustment, tool-less +2.5 mm

Dynamic NT Single extension Page 6 Mini Sidewing Page 10 Mounting Aids Page 14

Dynamic NT Tipmatic Plus Page 8 - 9 Magic Sorto Page 12 Technical Information Page 16

Accessories and Mounting Aids

5

Drawer Inset drawer

Zuschnittmaße Blendenprofil und Reling

Drawer installation measurements

Identical mounting positions for single and full extension slides.

Cabinet fixing positionsDrawer cut-outs and borings

All measurements in millimeter.

NL Drawer length Min. installation depth

250 240 250

270 260 270

300 290 300

350 340 350

400 390 400

450 440 450

500 490 500

550 540 550

600 590 600

650 640 650

37

32

28

650

600

550

500

450

400

350

300

270

250

14

352

288

224

128

160

192

96

BackBack

LSB = Inside drawer widthLW = Inside cabinet width

Single extensionon page 6

Full extension

Front edge of cabinet

SK = Drawer lengthNL = Nominal length of slide

Sys

tem

Inf

orm

atio

nD

raw

er s

lides

Org

aniz

ing

syst

ems

Mou

ntin

g A

ids

Tech

nica

l In

form

atio

n

6

• Single extension , 30 kg load capacity (based on 500 mm slide)• Soft-close soft closing system• Self-close, alternative • Self adjusting of drawer when sliding on slide • Integrated height adjustment, tool-less +2.5 mm

Concealed single extension slide, 30 kg Slide-on mounting with integrated

Soft-close or Self-close.

4 sided drawer 3 sided drawer Inset drawer

Nominal length Ref. No. Soft-close Ref. No. Self-close

250 7512.250

300 7502.300 7512.300

350 7502.350 7512.350

400 7502.400 7512.400

450 7502.450 7512.450

500 7502.500 7512.500

550 7502.550 7512.550

PU/Packing Unit PU 10 PU 10

VPE 10 = 10 pairs per box

Dynamic NT Single extension, 30 kg

Ref. No. Ref. No.

(Please order separately) 7900.VE1AA 7900.VE10AA

PU/Packing Unit PU 1 PU 10

PU 1 = 1 set, l/rPU 10 = 10 set

Front fixing bracket with integrated height adjustment

Dynamic NT Full extension Page 4 Mini Sidewing Page 10 Mounting Aids Page 14

Dynamic NT Tipmatic Plus Page 8 - 9 Magic Sorto Page 12 Technical Information Page 16

Accessories and Mounting Aids

7

Drawer Inset drawer

Drawer installation measurements

Identical mounting positions for single and full extension slides.

Cabinet fixing positionsDrawer cut-outs and borings

All measurements in millimeter.

NL Drawer length Min. installation depth Extension loss

250 240 250 52

300 290 300 52

350 340 350 63

400 390 400 63

450 440 450 74

500 490 500 96

550 540 550 107

37

18

28

550

500

450

400

350

300

250

14

288

128

9

224

160

192

96

BackBack

LSB = Inside drawer widthLW = Inside cabinet width

Single extension

Full extensionon page 4

Front edge of cabinet

SK = Drawer lengthNL = Nominal length of slide

Sys

tem

Inf

orm

atio

nD

raw

er s

lides

Org

aniz

ing

syst

ems

Mou

ntin

g A

ids

Tech

nica

l In

form

atio

n

8

Dynamic NT Tipmatic PlusThe full extension for handle-free furniture design.

Assembly aids

Drawer drill jig 66836-00

Cabinet member drill jig 95253

Pilot drill 35692

Drill bit with stop ring 92594

Drilling jig for the

back panel adapter 71098-01

Drilling jig for

the locking unit 71097-01

Dynamic NT Full extension Page 4 Magic Sorto Page 12 Mounting Aids Page 14

Mini Sidewing Page 10 Technical Information Page 16

Accessories and Mounting Aids

• Top Grass running performance• Load capacity up to 40 kg• Tool-free height adjustment• Simple drawer insertion and removal• Convenient opening and closing of the drawer or pull-out by gently tapping at any point over

the entire width of the front.• The unique and synchronised locking mechanism makes closing thdrawer a delightful

and satisfying experience for the user.• Comfortable access to drawer contents thanks to the large opening distance.

• Convenient front gap adjustment by means of eccentric element: ±1.5 mm

Dynamic NT Tipmatic Plus full extension

1

4

2

3

Dynamic NT Tipmatic Plus

Lengths full extension

270 71090-03

300 71091-03

350 71092-03

400 71093-03

450 71094-03

500 71095-03

550 71096-03

Packing unit 5 pairs

Dynamic NT Tipmatic Plus

Set of 5 snap-in devices 67897-03

Set: 5 left and 5 right

200 snap-in devices 67897-12

Box of 200 snap-in devices containing

packs of 5 pairs each

Synchronisation unit

68257-04

Locking units

71115-03

1 2

4

3

Ordering information

For a pair, you will need to order one

Grass Dynamic NT Tipmatic® Plus full

extension as well as Grass snap-in

devices, locking units and synchroni-

sation bars. One packing unit of full

extensions consists of 5 pairs. One

set of snap-in devices consists of 5

left-hand and 5 right-hand devices.

One set of locking units consists of

5 pairs of locking units and 5 pairs

of back panel adapters. One set of

synchronisation units consists of 10

synchronisation bars, length 1079

mm, and 20 synchronisation levers.

9

Dimension diagram of the drawer

Cutting the

synchronisation

bar to size

Drill hole pattern (detail)

37 325

9 99

21

9

12

24,5

10

17

37

4,5 ±1,5

SK = NL - 10

Minimum installation depth = NL + 26NL - 20

35,5

min. 12

21

4,5 (±1,5)

2

+

–

ICW - 97

Assembly of the snap-in device

Cabinet member fastening

Euro screw:

dia. 6 x at least 13 mm

with dia. 7 mm countersunk head

7.5

11.5

28.5

(21)

38

9.5

12

max. 16

min

5

10-1

3

±1.5mm

Inside cabinet width (ICW)

dia 6/11 deep

Inside drawer width = ICW-42

2227

2760

Drawer lenght = Nominal length -10 mm

Installation depth = Nominal length + 26

Height adjustment+2,5 mm

7,3

270

160

224

128

192

288

96

250 ±0,3

35,3

±0,3

32

2135,3

±0,3

35,3

±0,3

35,3

±0,3

35,3

±0,3

35,3

±0,3

35,3

±0,3

280 ±0,3

330 ±0,3

380 ±0,3

430 ±0,3

480 ±0,3

530 ±0,3

300

350

400

450

500

550

2832

14

37Minimum installation depth = NL + 26

Nominal length

Drawer Drill hole pattern – cabinet members

Adapter drill holes

Front gap adjustment

All measurements in millimeter.

Sys

tem

Inf

orm

atio

nD

raw

er s

lides

Org

aniz

ing

syst

ems

Mou

ntin

g A

ids

Tech

nica

l In

form

atio

n

10

Magic Mini SidewingOrganizing system for tall wooden drawers.

Ref. No. alu-grey

12650

PU/Packing Unit PU 4

PU 4 = 4 pcs.

Magic Mini Sidewing

Cabinet width in mm Ref. No. alu-metallic

600 12700.495.17

1200 12700.1095.17

PU/Packing Unit PU 1/25

PU 1/25 = 1 set per bag / 25 sets per box

Magic Classic Dividing Set

Magic Dividing Set

600 mm

Magic Dividing Set

1200 mm

1 set for 600 cabinet width consists of:2 Length Rails 462 mm 2 Divider Rails 495 mm4 Fixing parts

1 set for 1200 cabinet width consists of:3 Length Rails 462 mm2 Divider Rails 1095 mm 6 Fixing parts

• Optimum space organisation for tall drawers• Tool-less mounting

• Adjustable elements for individual arrangement

possibilities• Easy to cut to size Aluminium Dividing Rails

Dynamic NT Full extension Page 4 Dynamic NT Tipmatic Plus Page 8 - 9 Technical Information Page 16

Dynamic NT Single extension Page 6

Accessories and Mounting Aids

11

Mounting measurements Magic Mini Side Wing

Magic Classic Dividing Set

Length Rail Divider Rail

Y

X

12

120

38

32

32

40

cut to size

Y = Drawer interior length -14 mm

Y

Drawer interior length

X = Drawer interior width -41 mm

Drawer interior width

X

All measurements in millimeter.

Sys

tem

Inf

orm

atio

nD

raw

er s

lides

Org

aniz

ing

syst

ems

Mou

ntin

g A

ids

Tech

nica

l In

form

atio

n

12

Magic SortoOrganizing system for wooden drawers.

NL 550 and cabinet widthsfrom 450 mm or more.

Consisting of:3 Sorto trays 270 x 90 mm3 Sorto trays 180 x 90 mm1 Divider Support

NL 550 and cabinet widthsfrom 600 mm or more.

Consisting of:4 Sorto trays 270 x 90 mm4 Sorto trays 180 x 90 mm1 Divider Support

Magic Sorto Set NL 550 B3 Magic Sorto Set NL 550 B41 2

Magic Sorto Set

Ref. No. alu-metallic

Magic Sorto set NL 550 B3 12039.550.17

Magic Sorto set NL 550 B4 12049.550.17

PU/Packing Unit PU 1

1

2

PU 1 = 1 set

Sorto trays: stainless steel, plastic parts light-grey Divider Support: alu-metallic, plastic parts light-grey

• Modular-based expandable system• Individual components, dishwasher resistant• Safe for foods, hygienically approved• Trays made of stainless steel, Divider supports

alu-metallic, plastic components alu-grey

Dynamic NT Full extension Page 4 Dynamic NT Tipmatic Plus Page 8 - 9 Technical Information Page 16

Dynamic NT Single extension Page 6

Accessories and Mounting Aids

13

Installation measurements for wide cabinets 400 and 450 mm depth Installation measurements for wide cabinets 500 and 550 mm depth

Installation measurements for small cabinets 400 und 450 mm depth Installation measurements for small cabinets 500 and 550 mm depth

Divider Support cut to size Sorto trays 180, 270 mm

Legend

All measurements in millimeter.

DIL

DIL -363 mm

362

65.5DIL

DIL -454 mm

362

65.5

DIL = DrawerInterior Length

271 181271 181

181

90.5

271.5

65

End Cap

Cut to size

Spring LoadedDivider Support

A Measure drawer interior length (DIL). Remove spring loaded end caps to aluminum.

B Cut aluminum bar (length = DIL -87 mm).

C Attach spring loaded end caps to aluminum profile.

D Cut wooden spacer.

DIL -87 mm

B

C

AD D

Sys

tem

Inf

orm

atio

nD

raw

er s

lides

Org

aniz

ing

syst

ems

Mou

ntin

g A

ids

Tech

nica

l In

form

atio

n

14

Mounting Aidsfor Dynamic NT.

Ref. No.

7990

PU 1

PU/Packing Unit 1 = 1 pc.

7990 Boring jig for rear hook and front fixing bracket borings

For rear hook and front fixing

bracket borings

Ø 2,5 mm

Ø 2,5 mm

Ø 6 mm

Dynamic NT Full extension Page 4 Dynamic NT Tipmatic Plus Page 8 - 9 Technical Information Page 16

Dynamic NT Single extension Page 6

Accessories and Mounting Aids

15

Sys

tem

Inf

orm

atio

nD

raw

er s

lides

Org

aniz

ing

syst

ems

Mou

ntin

g A

ids

Tech

nica

l In

form

atio

n

Ref. No. / Ø 6,3 x 10,5 mm Ref. No. / Ø 6,3 x 14 mm

191 192

PU 1000 PU 1000

PU/Packing Unit 1000 = 1000 pcs.

191 / 192 Euro screw, nickel plated

Ø 6

.3

Length Ø 7.1

Ref. No. / Ø 3,5 x 15 mm

198

PU 1000

PU/Packing Unit 1000 = 1000 pcs.

198 Wood screw, nickel plated

Ø 3

.5

15 Ø 7

Ref. No.

7992

PU 1

PU/Packing Unit 1 = 1 set

1 set consisting of:

1 Shaft, 3 Drilling bit 2,5 mm, 1 Allen key

Drill bit

Drill bit for boring jig

7990

16

Drawer insertion

Height adjustment

Side tolerance

Information

Drawer removal

Place onto extended Dynamic NT

drawer slides and close.

Integrated tool-less height adjust-

ment up to 2.5 mm.

Side tolerance ±1,5 mm.

Extend drawer, press the lever

of the front fixing bracket and

remove the drawer from the

Dynamic NT slides.

Fixing of cabinet members:

The specified data is based on reference particle board according to DIN 68858, MDF and hardwood.If other types of woods and qualities are used, please consider the proper screw type as well as numbers of screws used.

Technical Informationfor Dynamic NT.

17

Sys

tem

Inf

orm

atio

nD

raw

er s

lides

Org

aniz

ing

syst

ems

Mou

ntin

g A

ids

Tech

nica

l In

form

atio

n

Notes

18

Notes

19

Notes

7117

2-00

–05

|200

9 –

5.00

0 (E

NG

) –G

RA

SS A

dver

tisi

ngA

ll er

rors

and

om

issi

ons

exce

pted

Grass GmbH Movement SystemsGrass Platz 1A 6973 Höchst, ÖsterreichTelefon +43 (0) 5578 701-0Telefax +43 (0) 5578 701-59E-Mail info@grass.eu