©2012 Hormoz Zareh & Jenna Bell 1 Portland State University, Mechanical Engineering
The two-dimensional bridge structure, which consists of steel T-sections, has pinned supports at its lower corners, and subjected to the following time varying load applied at the lower mid-span point.
©2012 Hormoz Zareh & Jenna Bell 2 Portland State University, Mechanical Engineering
©2012 Hormoz Zareh & Jenna Bell 3 Portland State University, Mechanical Engineering
� �
�
©2012 Hormoz Zareh & Jenna Bell 4 Portland State University, Mechanical Engineering
©2012 Hormoz Zareh & Jenna Bell 5 Portland State University, Mechanical Engineering
©2
2012 Hormoz Zare
eh & Jenna Bell
�
66 PPortland State University, Mechaniccal Engineering
©2012 Hormoz Zareh & Jenna Bell 7 Portland State University, Mechanical Engineering
©2012 Hormoz Zareh & Jenna Bell 8 Portland State University, Mechanical Engineering
©2012 Hormoz Zareh & Jenna Bell 9 Portland State University, Mechanical Engineering
©2012 Hormoz Zareh & Jenna Bell 10 Portland State University, Mechanical Engineering
©2012 Hormoz Zareh & Jenna Bell 11 Portland State University, Mechanical Engineering
©2012 Hormoz Zareh & Jenna Bell 12 Portland State University, Mechanical Engineering
©2012 Hormoz Zareh & Jenna Bell 13 Portland State University, Mechanical Engineering
©2
2012 Hormoz Zare
eh & Jenna Bell
�
14
�
4 Portland State Un
niversity, Mechaniical Engineering
©2012 Hormoz Zareh & Jenna Bell 15 Portland State University, Mechanical Engineering
