DYNAPAC

SPARE PARTSCATALOGUE

Box 504, SE-371 23 Karlskrona, Sweden

Phone: +46 455 30 60 00, Fax: +46 455 30 60 30

www.dynapac.com

CM 13

SCM013-2EN1

Spare Parts Catalogue

We reserve the right to change specifications without notice.Printed in Sweden.

I

Engines:

SCM013-2EN1

Forward/Reverse Vibratory Plate CompactorCM 13

Valid from plate serial number:

*20002804*

SCM013-2EN1 2001 - 12

Honda GX160K1SX Hatz 1B20

Published catalogue issues valid for these plate compactors:Catalogue Issue date Valid for serial numbers

ORDERING SPARE PARTSTo avoid errors in delivery, please give the followinginformation when ordering spare parts:1. Type of machine.2. Roller serial number.3. Quantity required.4. Part number.5. Parts denomination.6. Dimensions when ordering per length.

RESERVDELSBESTÄLLNINGFöljande uppgifter ska lämnas vid beställning av reserv-delar för att undvika leveransfel:1. Maskintyp.2. Vältens serienummer.3. Antal av önskad reservdel.4. Reserdelens artikelnummer.5. Reservdelens benämning.6. Måttuppgifter vid beställning av metervara.

ERSATZTEILBESTELLUNGZur Vermeidung von Fehllieferungen sind bei der Bestel-lung von Ersatzteilen folgende Angaben zu machen:1. Maschinentyp.2. Herstellungsnummer.3. Bestellmenge. (Quantity)4. Ersatzteilnummer. (Part Nº)5. Ersatzteilbenennung. (Denomination)6. Massangaben bei Bestellung von Meterware.

ORDINI DI RICAMBIPer evitare errori nelle consegne di ricambi, Vi preghiamodi comunicarci le seguenti informazioni al momento dell'ordinazione:1. Tipo di macchina.2. Numero di serie della macchina.3. Quantità dei pezzi desiderati. (Quantity)4. Numero di codice del pezzo. (Part Nº)5. Descrizione del pezzo di ricambio. (Denomination)6. Misura, in caso di ordine per metro.

PEDIDO DE RECAMBIOSPara evitar errores en las entregas, deberán indicarse lossiguientes datos al hacer un pedido de recambios:1. Tipo de máquina.2. Número de serie.3. Cantidad de piezas deseadas. (Quantity)4. Número de artículo de la pieza de recambio. (Part Nº)5. Denominación de la pieza. (Denomination)6. Indíquese la medida al solicitar un artículo que se

expide por metros.

COMMANDE DE PIECES DE RECHANGELes indications suivantes doivent être fournies lors de lacommande de piéces de rechange, afin d'éviter toute erreurde livraison:1. Type de machine.2. Numéro de série.3. Quantité désirée de pièce de rechange. (Quantity)4. Numéro de la piéce de rechange. (Part Nº)5. Dénomination de la piéce de rechange. (Denomination)6. Longueur en cas de commande au mètre.

YOUR AGENT/DEALER:

II

III

Notes

GROUP PAGE NOTESPARTS SERVICEINFO INFO

Changes

31

1

Text pagesThe text pages is structured as thepicture on the right.1. This is the remarks forspecific items and the descriptionsof the remarks is at the bottom ofthe parts list.2. Parts indicated by a dot andmoved to the right are includedwhen buying the assembled unitabove.3. Spare parts and service codefor a specific part, mainly forinternal use at Dynapac. "A" =Service part, "B" = Fast movingpart, "C" = Suggested exchangedpart and "D" = Regular spare part.

2

CatalogueValid from serial number:

1.

PÄRMETIKETTFör att undvika fel vid reservdelsbeställning finns härnedan två etiketter som passar i fickorna på pärmarnasryggar. På dessa kan man se från vilket vältnummer avaktuell maskin reservdelskatalogen gäller. Gör så här:1. Tag denna sida ur pärmen.2. Klipp ut etiketten till VÄNSTER (1) och sätt in den

i fickan på DENNA pärmens rygg.3. Finns det en etikett till HÖGER (2), kan denna an-

vändas på pärmen för FÖREGÅENDE utgåva avdenna katalog.

4. Kasta detta papper.

BINDER LABELTo avoid errors when ordering spare parts use the labelsbelow to identify the catalogues on the back of thebinder. The label contain the serial number range forwhich the catalogue is valid. Do like this:1. Remove this page from the binder.2. Cut out the LEFT label (1) and put it on THIS

binders back.3. If there is a label to the RIGHT (2), it can be used on

thebinder for PRECEDING issue of this catalogue.4. Throw away this paper.

KATALOG-BESCHRIFTUNGZur Vermeidung von Fehlen bei der Ersatzteilbestellungbenutzen Sie bitte die unteren Beschriftungen, um dieKataloge auf der Rückseite zu kennzeichen. Auf der Be-schriftung ist angegaben, für welche Maschinennummernder jeweilige Katalog gültig ist. Ablauf:1. Nehmen Sie dieses Blatt aus dem Katalog.2. Schneiden Sie die LINKE Beschriftung (1) aus. Schie-

ben Sie die Beschriftung in die tasche auf DEM Katalo-grücke.

3. Sollte die Beschriftung unten RECHTS (2) mitgeliefertwerden, kennzeichen Sie damit bitte die ÄLTEREAusführung dieses Kataloges.

4. Den Rest dieses Blattes bitte vernichten.

ETICHETTA POSTA SUL RACCOGLITOREPer evitare errori quando ordinate pezzi di ricambio, usatele etichette in calce che servono ad identificare i cataloghisul retro del raccoglitore. L'etichetta indica il numero dimatricola delle maccine prese in considerazione nel catalogo.1. Rimuovete questa pagina dal raccoglitore.2. Ritagliate l'etichetta posta a SINISTRA (1) e ponetela

sul retro DEL raccoglitore.3. Se trovate anche un'etichetta sulla DESTRA (2),

ritagliatela e ponetela sul raccoglitore relativo allaPRECEDENTE edizione del catalogo.

4. Distruggete questo foglio.

ETIQUETAGE DU CATALOGUEAfin d'éviter des erreurs lors de commandes de pièces derechange, nous vous conseillons d'apposer les marquages ci-dessous à l'arrière du classeur, pour identifier les catalogues.Ce marquage indique les numéros de série pour lesquels lecatalogue est adapté. Il convient de procéder de la façonsuivante:1. Retirez cette page du classeur.2. Découpez l'étiquette de GAUCHE (1), et apposez-la

à l'arrière de CE catalogue.3. Si il y a une étiquette à DROITE (2), vous pourrez

l'apposer sur le classeur de l'edition PRECEDENTE ducatalogue.

4. Détruire cetta feuille.

ETIQUETA PARA LA CARPETAPara evitar errores al pedir repuestos utilicen las etiquetasabajo descritas para identificar los catálogos en la partetrasera de la carpeta. En la etiqueta se ven los números dereferencia de la serie para la cual es válido el catálogo.Instrucciones:1. Quitar esta página de la carpeta.2. Corta la etiqueta IZQUIERDA (1) y ponerla est ESTA

carpeta en la parte trasera.3. Si hay una etiqueta en la parte DERECHA (2) se puede

utilizar en la carpeta para el catálogo que PRECEDE aesta.

4. Tirar esta hoja.

V

SCM013 -2EN1

CM13 SN 20002804 -

TC 1

TABLE OF CONTENTS PageMetso Dynapac AB

CM13 SN 20002804 - 2

Ground plate, engine plate 4Ground plate, engine plate 6V-belt cover 8

Eccentric element 10Eccentric element 12

Engine 14Engine Honda GX160K1SX 16Engine Hatz 1B20 18Engine installation Honda 22Engine installation Hatz 24

Power transmission 26Power transmission, Honda 28Power transmission Hatz 30

Handle 32Handle 34

Decals and documentation 36Decals and documentation 38

2

CM13 SN 20002804 -Metso Dynapac AB

SCM013-2EN1

3

CM13 SN 20002804 -

Rem. CodePart No.Ref. No. Qty Description10 Ground plate, engine plate ( Page 4 )20 Eccentric element ( Page 10 )30 Engine ( Page 14 )40 Power transmission ( Page 26 )70 Handle ( Page 32 )80 Decals and documentation ( Page 36 )

Metso Dynapac AB

SCM013-2EN1

5

Ground plate, engine plate

Rem. CodePart No.Ref. No. Qty Description10 Ground plate, engine plate ( Page 6 )20 V-belt cover ( Page 8 )

Metso Dynapac AB

SCM013-2EN1

6

Ground plate, engine plate

16884

Metso Dynapac AB

SCM013-2EN1

7

Ground plate, engine plate

Rem. CodePart No.Ref. No. Qty Description1 275235 -01 Engine base 12 502022 Screw 43 904229 Washer 8,4x16x1,544 571002 Nut UNC 5/16 - 1645 571003 Nut UNC 3/8 - 1646 904637 Washer 87 274043 BSpring guide 88 275237 Washer 89 303080001 DSpring 4

10 502279 DScrew 411 502278 DScrew 412 615044 DConical spring washer 413 275234 Ground plate 114 A Eccentric element 15 904703 Washer 13x24x4416 502059 Screw 417 Wheel carrrier, cpl 118 533025 .Screw 419 244008 C .Hose 2XL20 418001 B .Chain 2XL21 275432 .Pin 222 275431 .Shaft 223 904233 .Washer 21,0x36x3224 630030 .Pin 425 275504 .Wheel support, left 126 275503 .Wheel support, right 127 383598 D.Wheel 228 271032 .Washer 2

A) See section eccentric elementB) L=0,245 mC) L=0,205 m

Metso Dynapac AB

SCM013-2EN1

8

V-belt cover

17455

Metso Dynapac AB

SCM013-2EN1

9

V-belt cover

Rem. CodePart No.Ref. No. Qty Description1 702792-02 V-belt cover 12 904639 Washer 43 502003 Screw 4

Metso Dynapac AB

SCM013-2EN1

11

Eccentric element

Rem. CodePart No.Ref. No. Qty Description10 Eccentric element ( Page 12 )

Metso Dynapac AB

SCM013-2EN1

12

Eccentric element

16885-1

Metso Dynapac AB

SCM013-2EN1

13

Eccentric element

Rem. CodePart No.Ref. No. Qty Description1 938926 Eccentric element, cpl 12 502018 .Screw 83 904229 .Washer 8,4x16x1,584 275259 .Bearing cover 15 111093 .Bearing 26 134007 .Ring 27 275254 .Eccentric housing 18 275255 .Eccentric shaft 19 275258 .Bearing cover 1

10 161013 .Seal ring 111 970414 .V-belt pulley 112 275065 .Washer 113 604004 .Washer 114 502004 .Screw 115 Not used on this model 16 Not used on this model 17 Not used on this model 18 350032 .Key 1

Metso Dynapac AB

SCM013-2EN1

15

Engine

Rem. CodePart No.Ref. No. Qty Description10 Engine Honda GX160K1SX ( Page 16 )20 Engine Hatz 1B20 ( Page 18 )30 Engine installation Honda ( Page 22 )40 Engine installation Hatz ( Page 24 )

Metso Dynapac AB

SCM013-2EN1

16

Engine Honda GX160K1SX

16100

Metso Dynapac AB

SCM013-2EN1

17

Engine Honda GX160K1SX

Rem. CodePart No.Ref. No. Qty Description1 281125 Petrol engine 12 383031 Catalyser 1

239059 .Muffler 13 239060 .Muffler cover, upper 14 239062 .Exhaust pipe 15 238322 .Arrester, spark 16 239063 .Gasket, muffler 17 239323 A.Air filter, cpl 18 239065 D.Recoil starter, cpl 19 239374 B..Starter rope 1

10 239375 B..Spring 111 239376 ..Reel 112 239377 ..Spring 213 239378 ..Ratchet 214 239379 ..Friction spring 115 239380 ..Guide 116 239381 ..Screw 117 239391 B..Handle 118 239321 .Fuel tank 119 239324 D.Fuel tank cap 120 238302 D.Oil plug 221 238303 D.Gasket 222 238306 D.Oil plug 123 239067 .Oil alert 124 239325 .Carburettor 125 924842 .Spark plug 126 238301 D.Gasket 127 239664 D.Gasket, cylinder head 128 901233 Washer 429 500023 Screw 430 281128 A Spacer Distans 131 383031 B,C Catalyser 1

A) Not used in this modelB) OptionC) Replaced with muffler

Metso Dynapac AB

SCM013-2EN1

18

Engine Hatz 1B20

16837

Metso Dynapac AB

SCM013-2EN1

19

Engine Hatz 1B20

Rem. CodePart No.Ref. No. Qty Description1 380545 Engine Hatz 1B20 12 937001 Oil strainer, cpl 1

Not used on this model 13 938124 D.Oil drain valve 14 937003 B.O-ring 15 937415 .Oil strainer, cpl 16 936974 .Starter 17 936982 D.Recoil starter, cpl 18 936983 B..Knob 19 936985 B..Spiral spring 1

10 936986 ..Housing 111 936987 ..Washer 412 936988 ..Screw 413 936989 B..Rope 114 936990 ..Reel 115 936991 B..Spring 116 936992 ..Friction plate 117 936993 ..Screw 118 936994 ..Washer 119 936995 ..Ratchet 120 936996 ..O-ring 121 936997 .Screw 322 936998 .Washer 323 936999 .Starter pulley 124 937000 .Decal 125 938135 .Air cleaner, cpl 126 937011 ..Washer 127 937012 ..Screw 328 937013 A..Filter element 129 937014 ..Screw 130 937015 ..Protection cover 131 937016 ..Rubber sleeve 132 937017 ..Nut 133 937018 ..Plate 134 937019 ..Rubber hose 135 937020 ..Edge trim 136 936910 ..Washer 237 937021 ..Air filter house 138 937022 ..Gasket 239 937023 ..Gasket 140 937024 ..Vent nipple 141 937010 ..Edge trim 142 937007 .Protection cover 143 937008 ..Edge trim 144 937009 .Muffler 145 937005 A ..Exhaust tube 1

B ..Exhaust pipe 146 937004 ..Exhaust pipe 147 937006 ..Gasket 548 936976 D.Injection pump cpl 149 936977 ..O-ring 0,2 mm150 936978 ..O-ring 0,3 mm151 936979 ..O-ring 0,4 mm152 936980 ..O-ring 0,5 mm153 936981 ..O-ring 0,6 mm154 937608 .Oil dipstick 155 937607 .Nozzle 156 937606 .Sleeve 157 937604 .Lock 158 937605 .Socket 1

A) Old versionB) New version

Metso Dynapac AB

SCM013-2EN1

20

Engine Hatz 1B20

16837

Metso Dynapac AB

SCM013-2EN1

21

Engine Hatz 1B20

Rem. CodePart No.Ref. No. Qty Description59 937904 .Speed control 1

Metso Dynapac AB

SCM013-2EN1

22

Engine installation Honda

17452

Metso Dynapac AB

SCM013-2EN1

23

Engine installation Honda

Rem. CodePart No.Ref. No. Qty Description1 Engine 12 283046 Lifting eye 13 947684 Screw M10x3544 904230 Washer 10,5x22x245 385081 Bracket 16 928847 Nut 27 904567 Washer 48 500029 Screw M10-1,5x30 8,849 508048 Screw 4

10 904229 Washer 8,4x16x1,54

Metso Dynapac AB

SCM013-2EN1

24

Engine installation Hatz

17453

Metso Dynapac AB

SCM013-2EN1

25

Engine installation Hatz

Rem. CodePart No.Ref. No. Qty Description1 Engine 12 283046 Lifting eye 13 947684 Screw M10x3524 904230 Washer 10,5x22x245 385081 Bracket 16 928847 Nut 27 904567 Washer 48 500029 Screw M10-1,5x30 8,849 500053 Screw M8-1,25x20 8,84

10 904229 Washer 8,4x16x1,54

Metso Dynapac AB

SCM013-2EN1

27

Power transmission

Rem. CodePart No.Ref. No. Qty Description10 Power transmission, Honda ( Page 28 )20 Power transmission Hatz ( Page 30 )

Metso Dynapac AB

SCM013-2EN1

28

Power transmission, Honda

17451

Metso Dynapac AB

SCM013-2EN1

29

Power transmission, Honda

Rem. CodePart No.Ref. No. Qty Description1 281124 DCentrifugal clutch, cpl 12 150012 D.Snap ring 13 DNut used on this model 04 111180 D.Ball bearing 15 929360 B.Clutch lining 26 239290 D.Weight 27 929356 B.Spring 28 535002 .Screw 29 100901024 .Cover 1

10 935807 .Hub 111 935808 .Cover 112 935803 .Pulley 113 239734 .Retaining ring 114 281345 BV-belt 115 901688 Washer 116 500022 Screw M8-1,25x30 8,8117 351004 Key 118 Engine shaft

Metso Dynapac AB

SCM013-2EN1

30

Power transmission Hatz

16395

Metso Dynapac AB

SCM013-2EN1

31

Power transmission Hatz

Rem. CodePart No.Ref. No. Qty Description1 283054 Centrifugal clutch 12 937029 .V-belt pulley 13 938724 D.Ball bearing 14 938725 .Retaining ring 15 938726 .Snap ring 26 938727 .Nilos ring 17 937031 .Hub 18 912477 D.Centrifugal weight 29 238606 B.Clutch lining 2

10 239732 B.Spring 411 239857 .Cover 112 239539 .Retaining ring 113 935808 .Cover 114 239734 .Retaining ring 115 500053 Screw M8-1,25x20 8,8116 603009 Washer 117 282988 V-belt 1

Metso Dynapac AB

SCM013-2EN1

33

Handle

Rem. CodePart No.Ref. No. Qty Description10 Handle ( Page 34 )

Metso Dynapac AB

SCM013-2EN1

34

Handle

17438

Metso Dynapac AB

SCM013-2EN1

35

Handle

Rem. CodePart No.Ref. No. Qty Description1 Handle, cpl 12 384735-02 .Handle 13 516050 .Screw 24 904556 .Washer 8,4x16x3,045 500018 .Screw M8-1,25x12 8,846 500054 .Screw 47 904230 .Washer 10,5x22x248 270688-02 .Pipe 19 450163 D.Shock absorber 4

10 450008 D.Shock absorber 411 219002 .Rubber handle 2

Metso Dynapac AB

SCM013-2EN1

37

Decals and documentation

Rem. CodePart No.Ref. No. Qty Description10 Decals and documentation ( Page 38 )

Metso Dynapac AB

SCM013-2EN1

38

Decals and documentation

17436

Metso Dynapac AB

SCM013-2EN1

39

Decals and documentation

Rem. CodePart No.Ref. No. Qty Description1 527002 Screw 42 990001SE Product identification plate 13 281898 Decal "Hearing protection" 14 904680 Decal "Read instruction manual" 15 281269 Decal "LIFT" 16 704498 Decal "MODEL CODE" 17 704474 Decal "DYNAPAC" 18 903832 Safety decal 19 Documentation 1

10 383199 .Plastic pocket 1.Instruction book, Hatz 1.Instruction book Honda 1.Spare parts catalogue SCM0131.Warrenty registration certificate 1.Operation and maintenance ICM0131

Metso Dynapac AB

SCM013-2EN1