Date post: | 08-Mar-2016 |
Category: |
Documents |
Upload: | steelpress-sp |
View: | 213 times |
Download: | 0 times |
, RDW Vehicle Technology Division
@)
THE NETHERLANDS(N E D E R L A N D)
cd:D
IlECOMMUNICATION
Conceming (1):
-appro',<al granted-approval extended
appro',<al refusedaf>Pfo'lal \yithdrav/llprOd1:16tiendcfinitely diseontinued
ofa type ofmechanical coupling device or component pursuant to Regulation number 55.
Approval number: E4-55R-010037 Extension number: 01
Approval mark:E4 55R-Ol 0037
1.
2.
3.
4.
5.
6.
7.
Trade name or mark of the device or
component : STEELPRESS
Manufacturer' s name for the type ofdevice or component : BC-1700
Manufacturer' s name and address : STEELPRESS Sp. z 0.0.u1.PowstancowWielkopolskich 48PL-62-031 Lubon - Poznan
Ifapplicable, name and address ofthemanufacturer's representative
Altemative supplier's name or trademarks applied to the device orcomponent
.....
Name and address of company or bodytaking responsibility for the conformityof production : STEELPRESS Sp. z 0.0.
u1.PowstancowWielkopolskich 48PL-62-031 Lubon - Poznan
Submitted for approval on
..
P.O. Box 777
2700 AT Zoetenneer
The Netherlands
Tej. + 31 (0)793458143
Fax + 31 (0)79 345 8043www.rdw.nl
Vehicle Approval and Information
Coupling-component R55-01 v5.00 Page l oj3
Approval number: E4-55R-010037 Extension number: 01
8. responsible forconducting approval tests
«: DEKRA Automobil GmbH
Automobil Test Center
Senftenberger StraBe30D-01998 Klettwitz
9. Brief description
9.1. Type and class of device or component : Coupling head, Class B50-X
9.2. Characteristic values
Vehicle manufacturer' s maximum
permissible vehicle mass : .,. kg
Distribution of maximum permissiblevehicle mass between the axles
Vehicle manufacturer' s maximum
permissible towable trailer mass : ... kg
Vehicle manufacturer' s maximumpermissible static mass on couplingbaH : ... kg
Maximum mass of the vehicle, withbodywork, in running order, includingcoolant, oils, fue!, tools and sparewheel (if supplied) but not includingdriver : ... kg
Loading condition under which thetow balI height of a mechanicalcoupling device fitted to category MIvehiclesis to be measured- seeparagraph 2 of annex 7, appendix 1: : not applicable
10. Instructions for the attachment of the coupling device or component type to the vehicle andphotographs or drawings of the mounting points given by the vehicle manufacturer:see instructions for attachment and use
"
Coupling-component R55-01 v5.00 Page2 oj3
9.2.1. Primary values:
I
D
I
U
I
De I S(kN) (tonnes) (kN) (kg)15,8 - - 100
Altemative values:
I
D
I
U
I
De VI
S(kN) (tonnes) (kN) (kN) (kg)
- -
9.3. For classA mechanicalcouplingdevicesor components,includingtowingbrackets:
Approval number: E4-55R-010037 Extension number: 01
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
Infonnation on the fitting of any specia1reinforcing brackets or p1atesor spacingcomponents necessary for the attachment of the coupling device or component:not applicable
Additional information where the use of the coupling device or component is restricted tospecial types ofvehicles - see annex 5, paragraph 3.4.:not applicable
For Class K hook type couplings, details ofthe drawbar eyes suitable for use with theparticular hook type:not applicable .Date of test report : 12-6-2007
Number of test report : 200411342 Extension Ol
Approval mark position : on housing
Reason( s) for extension of approval . constructive modifications
Approval . _A..t el/extended/ldu5cd/withd1awH (1)
Place
Date
Signature
The list of documents deposited with the Administration Service which has grantedapproval is annexed to this communication and may be obtained on requesL
-Test report as mentioned in item 15-Instruction for attachment and use
-Drawings
(1)Strike out what does not apply.
..
Coupling-component R55-01 v5.00 Page 30j3