IPS-E-GN-000(4)
GENERAL INDEX TO STANDARDS AND STANDARD DRAWINGS
FOURTH EDITION
OCTOBER 2007
Oct. 2007
IPS-E-GN-000(4)PAGE No.
CONTENTS :
INTRODUCTION ................................................................................................................................. 3 SCOPE ................................................................................................................................................ 4 STANDARD HIGH COUNCIL (SHC).................................................................................................. 4 TECHNICAL COMMITTEE ................................................................................................................. 4 FEEDBACK......................................................................................................................................... 4 REQUIRMENT FOR REVISING IPS................................................................................................... 5 SYSTEMATIC REVIEW ...................................................................................................................... 5 AMENDMENT ..................................................................................................................................... 5 WITHDRAWAL ................................................................................................................................... 5 UP DATING......................................................................................................................................... 6 IPS STRUCTURE................................................................................................................................ 6 STANDARD FORMS .......................................................................................................................... 7 INDEXES............................................................................................................................................. 7
THE LIST OF STANDARDS CLASSIFIED BY SUBJECT .......................................................... 8 Heating, Ventilation, Air Conditioning Cooling & Refrigeration ............................................. 9 Civil ................................................................................................................................................... 11 Electrical........................................................................................................................................... 14 General ............................................................................................................................................. 17 Instrument ........................................................................................................................................ 20 Fixed Mechanical Equipment ....................................................................................................... 24 Instrument ........................................................................................................................................ 24 Piping & Pipelines ......................................................................................................................... 26 Process Machineries...................................................................................................................... 28 Process & Chemical ........................................................................................................................ 31 Safety, Fire Fighting & Environmental Pollution Control...................................................... 35 Technical Protection ...................................................................................................................... 39
THE LIST OF STANDARD DRAWINGS CLASSIFIED BY SUBJECT..................................... 46 Heating, Ventilation, Air Conditioning Cooling & Refrigeration ........................................... 47 Civil ................................................................................................................................................... 48 Electrical........................................................................................................................................... 52 Electrical........................................................................................................................................... 53 Instrument ........................................................................................................................................ 57
1
Oct. 2007
IPS-E-GN-000(4)
Fixed Mechanical Equipment ....................................................................................................... 58 Piping & Pipelines ........................................................................................................................... 60 Technical Protection ....................................................................................................................... 63
THE LIST OF WITHDRAWN STANDARDS CLASSIFIED BY SUBJECT ............................... 65 Civil ................................................................................................................................................... 66 Electrical........................................................................................................................................... 67 General Machineries ....................................................................................................................... 68 General ............................................................................................................................................. 70 Instrument ........................................................................................................................................ 71 Fixed Mechanical Equipment ......................................................................................................... 73 Piping & pipelines ........................................................................................................................... 75 Process Machineries....................................................................................................................... 76 Process & Chemical ........................................................................................................................ 79 Safety, Fire Fighting & Environmental Pollution Control............................................................ 80 Technical Protection ....................................................................................................................... 81
2
Oct. 2007
IPS-E-GN-000(4)
INTRODUCTION
Iranian Petroleum standards (IPS) have been prepared on the basis of the recognized standards, scientific publications, technical documents, accumulated knowledge and experiences in petroleum industries at national and international levels. The history of the standards in oil industries goes back to early 70s. In those years, the first collection of standards were, equipment standards for Abadan Refinery and onshore installations, in south of Iran. Later, gradually oil industry got bigger, and bigger, and gas and petrochemical industries were developed. These industries created a collection of standards for their own use and naturally there were no harmony between the standards prepared by the new developed industries with that of the oil industry. In order to unify all the standards in the whole ministry of petroleum, an organization called department of research and standards was set up which operates under deputy minister in engineering and local manufacturering. This organization has issued uniform standards for the whole hydrocarbon industries called Iranian Petroleum Standards (IPS) since 1989. Iranian Petroleum Standards are periodically reviewed and amended by the relevant technical committees in order to incorporate the views and the comments made by oil, gas and petrochemical experts. These Standards have been prepared in 12 technical branches, each in 5 topic groups of Engineering (E), Material (M) Construction (C),Periodical Inspection (I) and general (G). By insertion of General Machinery into General in 2005, these Standards have been prepared in 11 technical branches. In addition to the above mentioned standard literatures, standard drawings have also been prepared in 7 topic groups. These publications may not cover every requirement or diversity of condition at each locality, but the system is sufficiently flexible to allow individual operating companies to exercise their own judgment for their own situation. So far, 376 text for standards plus 185 standard drawings have been prepared. All these documents are transferred on to CD under Windows operating system and will be available upon request. At present all these Standards are in the process of being updated by the relevant technical committees. Research and Standards Organization welcomes any suggestion and/or comment from technical bodies and experts for improvement of the quality of these Standards. Comments and/or recommendations, will be studied and evaluated by the relevant technical committees, and will be incorporated in the next revision of the concerned standards. Comments shall be sent in writing to the director of Research and standards Organization.
3
Oct. 2007
IPS-E-GN-000(4)
SCOPEThis INDEX lists the IPS Standards and Standard Drawings on the date of issue of this document. They are listed by subject. 377 standards and 185 standard drawings are separately listed. updates, of this INDEX is issued yearly to all registered recipients and is available otherwise on request. In the subject index, in addition to the standard title, the number of pages and the STATUS of each standard are given. The position of any standard, if amended, revised or withdrawn will be shown in the subject index.
STANDARD HIGH COUNCIL (SHC)The Standard High Council is the senior policy making body of which the members are as follow: Deputy Minister in Engineering and local manufacturering Deputy Minister in Trade Affairs Production Manager in On-Shore Fields Managing Director of Investment Development Company of NPC Manager of Engineering & Projects of NIGC
The SHC meets at least once a year for setting the philosophy and directing the activities of the Organization. Additionally SHC gives final endorsement for introducing the new standards or withdrawal of the old standards. The SHC do not specifically approve the technical content. This is the responsibility of the Standards Organization. It is the responsibility of the user of a document to ensure that it is appropriate for a particular application.
TECHNICAL COMMITTEEThe Iranian Petroleum Standards are developed and maintained by a number of technical committees. Each technical committee is composed of at least six authorized specialists nominated by ten subsidiary companies and divisions of Ministry of Petroleum. There are at present 11 such committees each representing one of the 11 fields or disciplines for which Standards are prepared.
FEEDBACKOrganizations and individuals who use the IPS Standards are encouraged and invited to contact Standard Organization as for any questions, suggestions and comments concerning the standards, which could lead to their improvement and updating. Such feedbacks will assist materially in maintaining and enhancing the value of the document to
4
Oct. 2007 users.
IPS-E-GN-000(4)
All feedback is kept on the document record file by Standard Organization for formal revision. The CUSTODIAN will review this file, and if the queries and feedbacks require urgent consideration, he will arrange for preparation of an AMENDMENT to the standard. Feedback should be made in writing and addressed to the director of Standard Organization. No. 19-14th Alley, Kheradmand-E-shomali St. Karimkhane Zand Ave. Postal Code 1585886851 Tehran Iran Tel. 02188810459-60 Fax: 88810462
Email: [email protected]
REQUIRMENT FOR REVISING IPSThe various reason for which an IPS may require amendment/revision are described bellow:- Systematic review - Change of regulations - Change of national and/or international standard - Findings of technical audits - Change in Technology - Commercial reason - Other changes
SYSTEMATIC REVIEWIn accordance with the IPS directives every standard shall subject to systematic review by the relevant T.C. not more than 5 years after publication. To determine whether it should be confirmed, amended, revised, converted to another form of deliverable, or withdrawn.
AMENDMENTDuring formal revisions, if a standard requires urgent consideration, the matter will be notified to the relevant TECHNICAL COMMITTEE. Should the query be approved by the technical committee, the custodian will prepare an amendment to the document and make it rapidly dispatched to all registered holders.
WITHDRAWALWithdrawal of an IPS Standard happens when the standard is out-of-date and/or no longer needed. Following the approval for withdrawal, the registered holders of IPS will be notified by a circular, to
5
Oct. 2007
IPS-E-GN-000(4)
which attention will be drawn to the withdrawn standards and its replacements. When applicable, the replaced standards will have the same IPS number as the withdrawn standard. The revision number will be shown in parenthesis. The withdrawn Standards will not be supported by Research & Standard org, and continuing the use of these Standards will be at local management discretion.
UP DATINGThe IPS Standards are in the process of being updated by the Standards and Research Organization through technical committees .Standards and Research Organization welcomes any suggestions and comments concerning these standards from technical bodies or experts for improvement of technical quality of these Standards. Comments and/or recommendations are evaluated in the relevant technical committee, and will be considered in the next edition, upon approval. Comments should be sent in writing addressed to the Standards and Research Organization Director.
IPS STRUCTUREThe Iranian Petroleum Standard have been prepared in 6 topic groups of the following:
C D E G I M
Construction and Installation Drawing Engineering and Design General (standards containing more than one type) Inspection Material and Equipment
To the field of activities as hereunder follows;-
AR CE EL GN IN ME PI PM
Heating, Ventilation, Air Conditioning Cooling & Refrigeration Civil Electrical General Instrument Fixed Mechanical Equipment Piping & Pipelines Process Machineries
6
Oct. 2007 PR SF TP Process & Chemical Safety, Fire Fighting & Environmental Pollution Control Technical Protection
IPS-E-GN-000(4)
STANDARD FORMSThe IPS Standards are prepared in both printed form and electronic form. The printed form of the standards are available in a covered booklet in A4 size, which shows IPS Number with revision number in parenthesis and Issue date on the top right corner and Title of Standard at the center of the front cover. The electronic forms of standards are available on CD, prepared by Adobe Acrobat 7.0 under Windows. All Standard Drawings are available in both, hard copy and on CD using AutoCAD Version 14: or Higher.
All above documents are packed on a CD usable under windows 2000 version 95 or higher, available upon request.
INDEXESThe main section of this catalog is the list of standards and standard drawings classified by subject. The aim of this approach is to provide optimum possibilities for the selection of standards interrelated by their subjects.
Both indexes are updated regularly by including new information and will be published yearly. The edition date, indicated in this index is the date of the latest edition of each standard, which may be an original or a revised standard.
7
Oct. 2007
IPS-E-GN-000(4)
THE LIST OF STANDARDS CLASSIFIED BY SUBJECT
8
Oct. 2007
IPS-E-GN-000(4)
Heating, Ventilation, Air Conditioning Cooling & Refrigeration
IPS-C-AR-110 (0)
July 1995
IPS-M-AR-105 (0)
July 1994
Construction Standard for Installation, Testing, Adjusting and Commissioning of HVAC&R Systems Amendment No. 1 Amendment No. 2 Pages: 29 May 1999 Oct. 2003
Material and Equipment Standard for Boilers & Burners Amendment No. 1 Amendment No. 2 Pages: 24 Sep.1998 July 2003
IPS-E-AR-100 (0)
Jan. 1996
IPS-M-AR-125 (0)
Mar. 1993
Engineering Standard for Building Heating System Amendment No. 1 Amendment No. 2 Pages: 26 Jan. 2001 May 2005
Material and Equipment Standard for Packaged Air Conditioners Amendment No. 1 June 1998 Amendment No. 2 June 2003 Pages: 19
IPS-E-AR-120 (0)
Mar. 1996
IPS-M-AR-130 (0)
Mar. 1996
Engineering Standard for Building Air Conditioning Systems Amendment No. 1 Amendment No. 2 Pages: 53 Nov. 2000 May 2004
Material and Equipment Standard for Humidification & Dehumidification Unit & System Amendment No. 1 May 2000 Amendment No. 2 Aug. 2005 Pages: 25
IPS-E-AR-130 (0)
Jan. 1996
IPS-M-AR-145 (0)
Mar. 1996Air
Engineering Standard for Humidification & Dehumidification System Amendment No. 1 Amendment No. 2 Pages: 31 Dec. 2002 June 2005
Material and Equipment Standard for Field Erected Conditioning Systems Amendment No. 1 Amendment No. 2 Pages: 37 May 2001 July 2006
IPS-E-AR-160 (0)
July 1995
IPS-M-AR-185 (0)
July 1994
Engineering Standard for Venting, Ventilation and Pressurizing System Amendment No. 1 Amendment No. 2 Pages: 67 Feb. 2000 July 2004
Material and Equipment Standard for Field Erected Refrigeration System and Ice Plant Amendment No. 1 Amendment No. 2 Pages: 47 Jan.1999 May 2003
IPS-E-AR-180 (0)
July 1994
IPS-M-AR-205 (0)
Oct. 1996
Engineering Standard for Cold Stores and Ice Plants Amendment No. 1 Amendment No. 2 Amendment No. 3 Pages: 67 Dec. 1998 Feb. 2003 Aug. 2004
Material and Equipment Standard for Fans, Filters & Air Distribution Units & Systems Amendment No. 1 Amendment No. 2 Pages: 45 July 2001 Aug. 2006
9
Oct. 2007
IPS-E-GN-000(4)
Heating, Ventilation, Air Conditioning Cooling & Refrigeration
IPS-M-AR-215 (0)
July 1995
Material and Equipment Standard for Pipes, Valves and Fittings Amendment No. 1 Amendment No. 2 Pages: 20 Oct. 1999 Oct. 2004
IPS-M-AR-225 (0)
Oct. 1996
Material and Equipment Standard for General HVAC&R Equipment Amendment No. 1 Amendment No. 2 Pages: 60 July 2002 Aug. 2006
IPS-M-AR-235 (0)
Oct. 1996
Material and Equipment Standard for Insulation of HVAC&R Field Amendment No. 1 Amendment No. 2 Pages: 29 Aug. 2002 Dec. 2006
IPS-M-AR-245 (0)
Oct. 1996
Material and Equipment Standard for Room Air Conditioners (Window and Thru-the-Wall Type) Amendment No. 1 Amendment No. 2 Pages: 17 Dec. 2001 Sep. 2005
IPS-M-AR-255 (0)
Jan. 2007
Material Standard for Thermoplastics Pipings for Hot and Cold Water in Buirldings
Pages: 10
10
Oct. 2007 Civil
IPS-E-GN-000(4)
IPS-C-CE-112 (0)
Dec. 1994
IPS-C-CE-355 (0)Standard for Demolition Amendment No.1 Amendment No. 2 Pages: 17
Oct. 1996
Construction Standard for Earthworks Amendment No. 1 Amendment No. 2 Pages: 32 Nov. 1997 May 2004
May 2001 June 2006
IPS-C-CE-132 (0)
Jan. 1996
IPS-E-CE-110 (0)
Dec. 1994
Construction Standard for Foundations, Piles and Retaining Walls Amendment No. 1 Pages: 11 Dec. 2004
Engineering Standard for Soil Engineering Amendment No. 1 Amendment No. 2 Pages: 27 May 1998 July 2004
IPS-C-CE-200 (0)
Oct. 1996
IPS-E-CE-120 (0)
July 1995
Construction Standard for Concrete Structures Amendment No. 1 Amendment No. 2 Pages: 34 Dec. 1998 Aug. 2005
Engineering Standard for Foundations Amendment No. 1 Amendment No. 2 Pages: 29 Nov. 1997 Aug. 2004
IPS-C-CE-210 (0)
May 1996
IPS-E-CE-130 (0)
Jan. 1996
Construction Standard for Steel Structures Amendment No. 1 Amendment No. 2 Pages: 14 Nov. 1997 Nov. 2005
Engineering Standard for Piles Amendment No. 1 Amendment No. 2 Pages: 23 Nov. 1997 Oct. 2004
IPS-C-CE-260 (0)
Dec. 1997
IPS-E-CE-140 (0)
Oct. 1996
Construction Standard for Fireproofing
Engineering Standard for Retaining Walls & Slope Protection Amendment No. 1 Amendment No. 2 Pages: 27 May 1998 Nov. 2004
Amendment No. 1 Amendment No. 2 Pages: 12
July 2003 Jan. 2005
IPS-C-CE-342 (0)
July 1997
IPS-E-CE-160 (0)
Mar. 1996
Construction Standard for Water Supply & Sewerage Systems
Engineering Standard for Geometric Design of Roads an Streets Amendment No. 1 Amendment No. 2 Pages: 11 Dec. 2000 July 2006
Amendment No. 1 Amendment No. 2 Pages: 34
May 2003 May 2006
11
Oct. 2007 Civil
IPS-E-GN-000(4)
IPS-E-CE-200 (0)
Mar. 1996
IPS-E-CE-390 (0)
Jan. 1995
Engineering Standard for Concrete Structures Amendment No. 1 Amendment No. 2 Pages: 42 Dec. 1998 June 2005
Engineering Standard for Rain & Foul Water Drainage of Buildings Amendment No. 1 Amendment No. 2 Pages: 49 Oct. 1999 Dec. 2006
IPS-E-CE-210 (0)
Oct. 1996
IPS-E-CE-400 (0)
May 1997
Engineering Standard for Steel Structures Amendment No. 1 Amendment No. 2 Pages: 12 Nov. 1997 Sep. 2005
Engineering Standard for Sanitary Sewage Treatment Amendment No. 1 Pages: 19 Dec. 2003
IPS-E-CE-260 (0)
May 1993
IPS-E-CE-500 (0)
Aug. 1993
Engineering Standard for Fireproofing Amendment No. 1 Amendment No. 2 Pages: 22 Aug. 1998 Dec. 2005
Engineering Standard for Loads Amendment No. 1 Amendment No. 2 Pages: 79 Mar. 1998 May 2005
IPS-E-CE-340 (0)
Jan. 1996
IPS-G-CE-170 (0)
July 1997
Engineering Standard for Water Resources and Distribution Systems Amendment No. 1 Amendment No. 2 Pages: 19 Sep. 1999 Aug. 2006
Engineering and Construction Standard for Culvert Bridges and Related Structures Amendment No.1 June 2002
Pages: 7
IPS-E-CE-360 (0)
Jan. 1996
IPS-G-CE-182 (0)
Oct. 1996
Engineering Standard for Building Piping (Hot and Cold)
Engineering and Construction Standard for Road Surfacing & Pavements Amendment No.1 Pages: 16 Nov. 2000
Amendment No. 1 Pages: 24
Jan. 2003
IPS-E-CE-380 (0)
Aug. 1993
IPS-G-CE-250 (0)Engineering, Construction Chimneys an Stacks
May 1997and Material Standard for
Engineering Standard for Sewerage and Surface Water Drainage System Amendment No. 1 Amendment No. 2 Pages: 56 July 1998 Oct. 2006
Amendment No. 1 Pages: 19
Oct. 2003
12
Oct. 2007 Civil
IPS-E-GN-000(4)
IPS-G-CE-270 (0)
May 1997
Engineering, Construction and Material Standard for Fencing & Gates Amendment No. 1 Pages: 5 July 2002
IPS-G-CE-470 (0)
July 1995
Engineering and Construction Standard for Onshore Facilities Amendment No. 1 Pages: 34 May 1999
IPS-G-CE-480 (0)Engineering Installations and
Dec. 1997Standard for Offshore
Construction
Amendment No. 1 Pages: 23
Jan. 2004
IPS-M-CE-105 (1)
Mar. 2003
Material Standard for Building Materials Pages: 115
IPS-M-CE-345 (0)
Mar. 1996
Material Standard for Water Supply & Sewerage Equipment Amendment No. 1 Pages: 13 July 2001
13
Oct. 2007 Electrical
IPS-E-GN-000(4)
IPS-C-EL-115 (0)
Dec. 1997
IPS-M-EL-131 (1)
June 2005
Construction Standard for Electrical Installation
Material and Equipment Standard for Low Voltage Induction Motors
Pages: 8
Pages: 15
IPS-E-EL-100 (0)
Dec. 1997
IPS-M-EL-132 (1)
June 2005
Engineering and Equipment Standard for Electrical System Design (Industrial & Non-Industrial)
Material and Equipment Standard for Medium and High Voltage Induction Motors
Pages: 184
Pages: 18
IPS-E-EL-110 (0)
Dec. 1994
IPS-M-EL-136 (0)
May 1993
Engineering Standard for Hazardous Area
Material and Equipment Standard for Rotating Electrical Machines Direct Current Motors
Pages: 104
Pages: 27
IPS-E-EL-160 (0)Engineering Standard Distribution Lines for
May 1997Overhead Transmission &
IPS-M-EL-138 (0)Material and Generators Equipment
July 1994Standard for Synchronous
Pages: 22
Pages: 43
IPS-I-EL-215 (0)
Dec. 1997
IPS-M-EL-142 (0)
May 1993
Procedure for Initial & Periodical Inspection in Potentially Explosive Atmospheres (Hazardous Area)
Material and Equipment Standard for Low Voltage Industrial and Flameproof a.c. Motor Starters
Pages: 9
Pages: 47
IPS-I-EL-217 (0)
Mar. 1996
IPS-M-EL-143 (1)
June 2004for Low Voltage
Inspection Standard for Precommissioning Electrical Tests
Material and Equipment Standard Switchgear and Controlgear
Pages: 72
Pages: 21
14
Oct. 2007 Electrical
IPS-E-GN-000(4)
IPS-M-EL-144 (1)
June 2004
IPS-M-EL-176 (1)
July 2003
Material and Equipment Standard for Medium and High Voltage Switchgear and Controlgear
Material and Equipment Standard for Uninterruptible Power System (UPS)
Pages: 21
Pages: 14
IPS-M-EL-151 (1)
Dec. 2005
IPS-M-EL-181 (1)
Sep. 2006
Material and Equipment Standard for Dry Type Power Transformers
Material and Equipment Standard for Power Factor Improvement Capacitor
Pages: 11
Pages: 10
IPS-M-EL-152 (1)
Dec. 2005
IPS-M-EL-185 (0)
May 1993
Material and Equipment Standard for Oil Immersed Power Transformers
Material and Equipment Standard for Industrial and Flameproof Motor Remote Control Stations
Pages: 34 Pages: 15
IPS-M-EL-155 (0)
May 1993
IPS-M-EL-190 (0)
Jan. 1996
Material and Equipment Standard for Transformer Rectifiers for Cathodic Protection Amendment No. 1 Pages: 27 Dec. 1997
Material Standard for Electrical Heat Tracing
Pages: 9
IPS-M-EL-165 (0)
May 1993
IPS-M-EL-220 (0)
May 1993
Material and Equipment Standard for Low Voltage Industrial and Flameproof a.c. Motor Control Centers (MCC)
Material and Equipment Standard for Current Limiting Reactors
Pages: 35
Pages: 26
IPS-M-EL-174 (1)
July 2003
IPS-M-EL-230 (0)
Nov. 1993
Material and Equipment Standard for Battery and Battery Charger (DC Power supply)
Material and Equipment Standard for Electrical Lighting Columns
Pages: 11
Pages: 19
15
Oct. 2007 Electrical
IPS-E-GN-000(4)
IPS-M-EL-240 (0)
May 1993
Material and Equipment Standard for Low Voltage Industrial and Flameproof a.c. Switch-Fuse Assembly
Pages: 42
IPS-M-EL-271 (1)
July 2003
Material Standard for Low Voltage Cables & Wires
Pages: 10
IPS-M-EL-272 (1)
July 2003
Material Standard for Medium and High Voltage Power Cables
Pages: 7
IPS-M-EL-273 (1)
July 2003
Material Standard for SubMarine Power Cables with Inherent Optical Fibers
Pages: 10
IPS-M-EL-290 (0)
May 1993
Material Standard for General Electrical Items
Pages: 67
16
Oct. 2007 General
IPS-E-GN-000(4)
IPS-E-GN-000 (4)
Oct. 2007
IPS-I-GN-335 (0)
May 1997
General Index to Standards and Standard Drawings
Periodical inspection & Testing of Elevators Amendment No. 1 Mar. 2005
Pages: 81
Pages: 87
IPS-E-GN-100 (0)
Aug. 1993
IPS-I-GN-350 (0)
Dec. 1997
Engineering Standard for Units
Periodical inspection & Testing of Cranes
Pages: 19 Pages: 80
IPS-E-GN-120 (0)
Dec. 1997
IPS-M-GN-110 (0)
Dec. 1997
Engineering Standard for Drafting
Material and Equipment Standard for Fork Lift Trucks
Pages: 13 Pages: 39
IPS-G-GN-180 (1)
Mar. 2005
IPS-M-GN-130 (1)
Nov. 2004
General Standard for Gas Cylinders
Material and Equipment Standard for Metric Type Fasteners (Screws , Bolts, Studs , Nuts, and Washers) Pages: 55
Pages: 20
IPS-G-GN-210 (0)
May 1997
IPS-M-GN-140 (1)
July 2004
General Standard for Packing and Packages Amendment No. 1 Pages: 21 Oct. 2003
Material and Equipment Standard for Bearings
Pages: 23
IPS-G-GN-370 (1)
June 2004
IPS-M-GN-150 (0)
Jan. 1996
General Standard for Electric and Hydraulic Elevators
Material Standard for Steel Wire Ropes for General Services Amendment No. 1 Dec. 2002
Pages: 57
Pages: 23
17
Oct. 2007 General
IPS-E-GN-000(4)
IPS-M-GN-160 (1)
Feb. 2005
IPS-M-GN-340 (0)
July 1997
Material and Equipment Standard for Hooks, Shackles, Eyes Bolts and chains
Material and Equipment Standard for Mobile Cranes-Power Driven
Pages: 14
Pages: 52
IPS-M-GN-170 (1)
Jan. 2005
IPS-M-GN-350 (1)
Mar. 2005
Material and Equipment Standard for Laboratory Glassware & Related Apparatus
Material and Equipment Standard for Overhead and Portal Bridge (Gantry) Cranes
Pages: 44
Pages: 11
IPS-M-GN-210 (0)
July 1997
IPS-M-GN-360 (0)
Dec. 1997
Material and Equipment Standard for Conveyors
Material and Equipment Standard for General Use Hoses Amendment No. 1 Feb. 2003
Pages: 70
Pages: 29
IPS-M-GN-240 (0)
July 1997
IPS-M-GN-365 (1)Material and Compressors Equipment
Sep. 2003Standard for Mobile Air
Material Standard for Workshop and Wall Supported Jib Cranes and Chain Hoists Amendment No. 1 Pages: 8 Sep. 2003
Pages: 20
IPS-M-GN-260 (0)
July 1997
IPS-M-GN-375 (0)
Dec. 1997for Arc Welding
Material and Equipment Standard for Pallets
Material and Equipment Standard Equipment and Accessories
Pages: 29
Pages: 26
IPS-M-GN-330 (0)
July 1995
IPS-M-GN-450 (0)
Mar. 1996
Material and Equipment Standard for Offshore Cranes
Material and Equipment Standard for Abrasive Air Blasting Machine Amendment No. 1 Oct. 2003
Pages: 15
Pages: 10
18
Oct. 2007 General
IPS-E-GN-000(4)
IPS-M-GN-470 (0)Material and Equipment Equipment
May 1997Standard for Water Blasting
Amendment No. 1 Pages: 20
Aug. 2003
19
Oct. 2007 Instrument
IPS-E-GN-000(4)
IPS-C-IN-100 (1)
Jan. 2005
IPS-C-IN-190 (0)
Jan. 1996
Construction and Installation Standard for General Instruments Field Inspection, Calibration & Testing of Instrument and Instrument System Pages: 32
Installation and Construction Standard for Transmission Systems
Pages: 29
IPS-C-IN-110 (0)
Aug. 1993
IPS-C-IN-240 (1)
Jan. 2005of Liquid
Construction Standard for Pressure Instruments Amendment No. 1 Pages: 6 Oct. 1997
Construction Standard for Measurement Hydrocarbons Custody Transfer
Pages: 25
IPS-C-IN-120 (0)
May 1993
IPS-E-IN-100 (1)
Jan. 2005
Construction and Installation Standard for Temperature Instruments Amendment No. 1 Pages: 19 Oct. 1997
Engineering Standard for General Instrumentation
Pages: 83
IPS-C-IN-130 (0)
July 1994
IPS-E-IN-105 (0)
Dec 1997
Construction and Installation Standard for Flow Instruments Amendment No. 1 Pages: 47 Oct. 1997
Engineering Standard for Instrument workshop, layouts, test and calibration tools
Pages: 41
IPS-C-IN-140 (0)
July 1994
IPS-E-IN-110 (0)
Aug. 1993
Construction and Installation Standard for Level Instruments Amendment No. 1 Pages: 35 Mar. 1999
Engineering Standard for Pressure Instruments Amendment No. 1 Pages: 20 Oct. 1997
IPS-C-IN-160 (1)
Aug. 2003
IPS-E-IN-120 (0)
May. 1993
Construction and Installation Standard for Control Valves
Engineering Standard for Temperature Instruments Amendment No. 1 Oct. 1997
Pages: 24
Pages: 48
20
Oct. 2007 Instrument
IPS-E-GN-000(4)
IPS-E-IN-130 (0)
Nov. 1993
IPS-G-IN-200 (1)
June 2003
Engineering Standard for Flow Instruments Amendment No. 1 Pages: 63 Oct. 1997
General Standard for Instruments air system
Pages: 58
IPS-E-IN-140 (0)
Dec. 1994
IPS-G-IN-210 (0)
July 1994
Engineering Standard for Level Instruments Amendment No. 1 Pages: 34 Jan. 1999
Engineering and Material Standard for Instrument Protection Amendment No. 1 Pages: 29 Apr. 1999
IPS-E-IN-160 (1)
Aug. 2003
IPS-G-IN-220 (0)
July 1997
Engineering Standard for Control Valves
Engineering and Installation Standard for Control Centers Amendment No. 1 Aug. 2005
Pages: 95
Pages: 18
IPS-E-IN-180 (0)
Oct. 1996
IPS-G-IN-230 (0)
Dec. 1997
Engineering Standard for Instruments Electrical Power Supply & Distribution Systems Amendment No. 1 Pages: 14 Aug. 2005
General Standard for Analyzer
Pages: 150
IPS-E-IN-190 (1)
Jan. 2001
IPS-G-IN-250 (0)
Oct 1996
Engineering Standard for Transmission Systems
Engineering and Construction Standard for Distributed Control System (DCS) Amendment No. 1 Nov. 2002
Pages: 24 Pages: 30
IPS-E-IN-240 (1)
Jan. 2005of Liquid
IPS-G-IN-260 (1)
May 2006
Engineering Standard for Measurement Hydrocarbons (Custody Transfer)
Engineering and Installation Standard for Indicating Lights, Alarms & Protective Systems
Pages: 53
Pages: 23
21
Oct. 2007 Instrument
IPS-E-GN-000(4)
IPS-G-IN-270 (1)
Nov. 2006
IPS-M-IN-120 (0)Material and Instruments Equipment
May 1993Standard for Temperature
General Standard for Instruments of Fire Fighting & Detection Equipment
Amendment No. 1 Pages: 18 Pages: 30
Oct. 1997
IPS-G-IN-290 (0)
Oct. 1996
IPS-M-IN-130 (0)
Nov. 1993
Engineering and Construction Standard for Programmable Logic Controllers (PLC) Amendment No. 1 Pages: 22 Mar. 2002
Material and Equipment Standard for Flow Instruments Amendment No. 1 Pages: 36 Oct.1997
IPS-G-IN-300 (1)
Sep. 2006
IPS-M-IN-140 (0)
July 1994
Tank Gauging Devices for Petroleum and Petroleum Product
Material and Quality Control Standard for Level Instruments Amendment No. 1 Dec.1998
Pages: 24
Pages: 23
IPS-I-IN-100 (1)
Jan. 2005
IPS-M-IN-150 (1)
Jan. 2007
Inspection Standard for General Instrument systems
Material and Equipment Standard for Receiving Instruments
Pages: 22
Pages: 25
IPS-I-IN-115 (1)
Feb. 2005
IPS-M-IN-160 (1)
Aug. 2003
Periodical Inspection for Instrumentation
Material Standard for Control Valves
Pages: 35 Pages: 7
IPS-M-IN-110 (0)
May 1993
IPS-M-IN-190 (1)
Dec. 2006
Material and Equipment Standard for Pressure Instruments Amendment No. 1 Pages: 17 Oct.1997
Material and Equipment Standard for Transmission Systems
Pages: 17
22
Oct. 2007 Instrument
IPS-E-GN-000(4)
IPS-M-IN-220 (0)
July 1997
Material Standard for Control Panels and System Cabinets Amendment No. 1 Apr. 2007
Pages: 29
IPS-M-IN-240 (0)
Oct. 1996
Material Standard for Volumetric Liquid Measurement Methods (Custody Transfer)
Pages: 21
IPS-M-IN-250 (1)
Mar. 2004
Material and Equipment Standard for Distributed Control System (DCS)
Pages: 41
IPS-M-IN-260 (1)
May 2006
Material and Equipment Standard for Alarms and Protective Systems
Pages: 16
IPS-M-IN-280 (1)
Feb. 2007
Material Standard for Miscellaneous Items
Pages: 42
IPS-M-IN-290 (0)
Mar. 1996
Material and Equipment Standard for Programmable Logic Controllers (PLC) Amendment No. 1 Pages: 34 Jun. 2002
23
Oct. 2007 Fixed Mechanical Equipment
IPS-E-GN-000(4)
IPS-C-ME-120 (0)
May 1993
IPS-G-ME-150 (0)
Jan. 1996
Construction Standard for Aviation Turbine Fuel Storage Tanks Amendment No. 1 Pages: 7 Jan. 1999
Engineering and Material Standard for Towers, Reactors, Pressure Vessels and Internals Amendment No. 1 Pages: 63 Feb. 2001
IPS-C-ME-130 (0)
May 1993
IPS-G-ME-160 (1)
Mar. 2006
Construction Standard for Pressure Storage (for LPG) Spheres Amendment No. 1 Pages: 10 Mar. 1999
Engineering and Material Standard for Water Cooling Towers
Pages: 52
IPS-E-ME-120 (0)
Aug. 1993
IPS-G-ME-170 (1)
Sep. 2003
Engineering Standard for Aviation Turbine Fuel Storage Tanks Amendment No. 1 Pages: 10 Jan. 1999
Engineering and Material Standard for Firetube Package Boilers
Pages: 21
IPS-E-ME-130 (0)
May 1993
IPS-G-ME-180 (1)
Sep. 2003
Engineering Standard for Pressure Storage Spheres (for LPG) Amendment No. 1 Pages: 21 Mar. 1999
Engineering and Material Standard for Water Tube Boilers
Pages: 40
IPS-G-ME-100 (1)
Nov. 2004
IPS-G-ME-200 (1)
Mar. 2003
General Standard for Atmospheric Above Ground Welded Steel Storage Tanks
Engineering and Material Standard for Fired Heaters
Pages: 40
Pages: 22
IPS-G-ME-110 (1)
Oct. 2005
IPS-G-ME-210 (1)
Mar. 2006
General Standard for Large Welded Low Pressure Storage Tanks
General Requirements for Flares & Flare Stacks
Pages: 8 Pages: 42
24
Oct. 2007 Fixed Mechanical Equipment
IPS-E-GN-000(4)
IPS-G-ME-220 (1)
May 2007
IPS-M-ME-130 (0)
Aug. 1993
Engineering and Material Standard for Shell & Tube Heat Exchangers
Material and Equipment Standard for Pressure Storage Vessels and Spheres (for LPG) Amendment No. 1 Mar. 1999
Pages: 28
Pages: 15
IPS-G-ME-230 (1)
June 2006
IPS-M-ME-206 (0)
Jan. 1996
Engineering and Material Standard for Double Pipe Heat Exchangers
Material and Equipment Standard for Reformer Furnaces Including Tube and Outlet Manifolds Amendment No. 1 Dec. 2002
Pages: 12
Pages: 29
IPS-G-ME-245 (1)
Mar. 2003
IPS-M-ME-256 (0)
Nov. 1993
Engineering and Material Standard for Air Cooled Heat Exchangers
Material and Equipment Standard for Steam Jet Ejectors
Amendment No. 1 Pages: 31 Pages: 15
June 1999
IPS-G-ME-250 (1)
Mar. 2003
Material and Engineering Standard for Pressure and Vacuum Relief Devices
Pages: 24
IPS-G-ME-253 (1)
Feb. 2005
General Requirements for Industrial Incinerators
Pages: 14
IPS-M-ME-120 (0)
May 1993
Material and Equipment Standard for Aviation Turbine Fuel Storage Tanks Amendment No. 1 Pages: 18 Jan. 1999
25
Oct. 2007 Piping & Pipelines
IPS-E-GN-000(4)
IPS-C-PI-140 (0)
Dec. 1997
IPS-C-PI-410 (0)
May 1997
Construction Standard for Transportation Pipelines (Onshore) Amendment No. 1 Pages: 73 Dec. 2003
Construction Standard for Inside Pipe Chemical Cleaning Amendment No. 1 Pages: 13 Dec. 2006
IPS-C-PI-240(1)
Aug. 2005
IPS-E-PI-140 (0)
Dec. 1997
Construction Standard for Plant Piping Systems
Engineering Standard for Onshore Transportation Pipelines Amendment No. 1 Jan. 2004
Pages: 16
Pages: 31
IPS-C-PI-270 (1)
June 2001
IPS-E-PI-200 (0)
July 1997
Construction Standard for Welding of Transportation Pipeline
Engineering Standard for Flexibility Analysis Amendment No. 1 June 2006
Pages: 32
Pages: 11
IPS-C-PI-290 (0)
May 1997
IPS-E-PI-221 (0)
Jan. 2000
Construction Standard for Welding of Plant Piping Systems Amendment No. 1 Sep. 2002
Engineering Standard for Piping Material Selection (on Plot Piping) Amendment No. 1 Nov. 2006
Pages: 20
Pages: 424
IPS-C-PI-350 (1)
June 2002
IPS-E-PI-240 (1)
Jan. 2005
Construction Standard for Plant Piping Systems Pressure Testing
Engineering Standard for Plant Piping Systems Amendment No. 1 Nov. 2006
Pages: 13
Pages: 69
IPS-C-PI-370 (1)
Dec. 2002
IPS-G-PI-230 (0)
July 1997
Construction Standard for Transportation Pipelines (Onshore) Pressure Testing
General Standard for Strainers & Filters Amendment No. 1 July 2001
Pages: 27
Pages: 22
26
Oct. 2007 Piping & Pipelines
IPS-E-GN-000(4)
IPS-G-PI-280 (1)
Mar. 2005
General Standard for Pipe Supports
Pages: 11
IPS-M-PI-110 (1)
Mar. 2003
Material and Equipment Standard for Valves
Pages: 51
IPS-M-PI-130 (1)
June 2002and
Material and Equipment Standard for Pig Launching Receiving Traps
Pages: 18
IPS-M-PI-150 (1)
Aug. 2006
Material Standard for Flanges & Fittings
Pages: 29
IPS-M-PI-170 (0)
July 1997
Material and Equipment Standard for Pigs Amendment No. 1 Pages: 9 Dec.2000
IPS-M-PI-190 (2)
Apr. 2004
Material and Equipment Standard for Line Pipe
Pages: 46
27
Oct. 2007 Process Machineries
IPS-E-GN-000(4)
IPS-C-PM-215 (1)
Mar. 2005
IPS-I-PM-305 (1)
Feb. 2004
Construction Standard for Process Machineries Assembling & Installation
Standard for Periodical Inspection of Machineries
Pages: 21 Pages: 30
IPS-E-PM-100 (1)
July 2003
IPS-M-PM-105 (1)
June 2002
Engineering Standard for General Design Requirements of Machineries
Material and Equipment Standard for Centrifugal Pumps for Process Services
Pages: 15
Pages: 14
IPS-E-PM-110 (1)
Feb. 2005
IPS-M-PM-115 (1)
May. 2006
Engineering Standard for Technical Evaluation of Machineries
Material and Equipment Standard for Centrifugal Pumps for General Services
Pages: 20 Pages: 12
IPS-E-PM-385 (1)
July 2003
IPS-M-PM-125 (0)
Dec. 1994
Engineering Standard for Machinery Piping
Material and Equipment Standard for Fire Water Pumps Amendment No. 1 Amendment No. 2 May. 2000 Nov. 2006
Pages: 10 Pages: 21
IPS-E-PM-400 (1)
Aug. 2003
IPS-M-PM-130 (1)
June 2002
Engineering Standard for Vendor's Data Requirements
Material and Equipment Standard for Positive Displacement Pumps Reciprocating
Pages: 7 Pages: 11
IPS-G-PM-120 (1)
Oct. 2004
IPS-M-PM-135 (0)
Mar. 1996
General Standard for Accessibility & Safety of Machineries
Material and Equipment Standard for Light Duty Centrifugal Pumps Amendment No. 1 Oct. 1999
Pages: 18 Pages: 13
28
Oct. 2007 Process Machineries
IPS-E-GN-000(4)
IPS-M-PM-140 (1)
June 2002
IPS-M-PM-200 (1)
Dec. 2003for Reciprocating
Material and Equipment Standard for Positive Displacement Pumps-Rotary
Material and Equipment Standard Compressors for Process Services
Pages: 21 Pages: 8
IPS-M-PM-150 (1)
Nov. 2003
IPS-M-PM-211 (1)
July 2006Reciprocating
Material and Equipment Standard for Positive Displacement Pumps Controlled Volume
Material and Equipment Standard for Compressors for Instrument Air Services
Pages: 6
Pages: 15
IPS-M-PM-160 (0)
July 1995
IPS-M-PM-220 (1)
June 2002
Material and Equipment Standard for Positive Displacement, Oil Sealed-Rotary Vacuum Pumps Amendment No. 1 Pages: 21 Sep. 2002
Material and Equipment Standard for Positive Displacement Compressors Rotary
Pages: 12
IPS-M-PM-170 (1)
June 2002
IPS-M-PM-230 (0)
Nov. 1993
Material and Equipment Standard for Centrifugal Compressors for Process Services
Material and Equipment Standard for Special Purpose Centrifugal Fans Amendment No. 1 July 2002
Pages: 12 Pages: 17
IPS-M-PM-180 (1)
June 2002
IPS-M-PM-235 (0)
Dec. 1994
Material and Equipment Standard for Package Integrally Geared Centrifugal Compressors for Utility and Instruments Pages: 10
Material and Equipment Standard for General Purpose Centrifugal Fans
Pages: 14
IPS-M-PM-190 (1)
June 2002
IPS-M-PM-240 (1)
June 2002
Material and Equipment Standard for Axial Flow Centrifugal Compressors
Material and Equipment Standard for General Purpose Steam Turbines
Pages: 16
Pages: 10
29
Oct. 2007 Process Machineries
IPS-E-GN-000(4)
IPS-M-PM-250 (1)
June 2002
IPS-M-PM-320 (1)
June 2002
Material and Equipment Standard for Special Purpose Steam Turbines
Material and Equipment Standard for Lubrication, Shaft Sealing and Control Oil Systems and Auxiliaries for Process Services Pages: 13
Pages: 12
IPS-M-PM-260 (1)
Jan. 2003
IPS-M-PM-330 (1)
Jan. 2003
Material and Equipment Standard for Combustion Gas Turbines
Material and Equipment Standard for Mixers
Pages: 22 Pages: 22
IPS-M-PM-270 (0)
July 1994
Material and Equipment Standard for Expansion Turbines
Pages: 48
IPS-M-PM-290 (1)
Mar.2005
Material and Equipment Standard for Reciprocating Internal Combustion Engines
Pages: 25
IPS-M-PM-300 (1)
Dec. 2003
Material and Equipment Standard for Special Purpose Gear Units
Pages: 7
IPS-M-PM-310 (1)
Dec. 2003
Material and Equipment Standard for Special Purpose Couplings
Pages: 6
30
Oct. 2007 Process & Chemical
IPS-E-GN-000(4)
IPS-E-PR-150 (0)
July 1997Package &
IPS-E-PR-260 (1)
Nov. 2006
Engineering Standard for Basic Design Recommended Practice for Feasibility Studies Amendment No. 1 Pages: 104 Oct. 2003
Engineering Standard for Detailed Design, Engineering & Procurement
Pages: 57
IPS-E-PR-170 (0)
Jan. 1996
IPS-E-PR-280 (0)
Dec. 1997
Engineering Standard for Process Flow Diagram Amendment No. 1 Pages: 29 Dec. 2000
Engineering Standard for Start-Up Sequence & General Commissioning Procedures Amendment No.1 Pages: 25 May 2004
IPS-E-PR-190 (0)
Mar. 1996
IPS-E-PR-290 (0)
Jan. 1996
Engineering Standard for Layout & Spacing Amendment No.1 Pages: 35 June 2002
Engineering Standard for Plant Operating Manuals
Amendment No. 1 Pages: 23
Feb. 2001
IPS-E-PR-200 (0)
Mar. 1996
IPS-E-PR-300 (0)
Dec. 1997
Engineering Standard for Basic Engineering Design Data Amendment No.1 Pages: 41 Jan. 2002
Engineering Standard for Plant Technical & Equipment Manuals (Engineering Dossiers) Amendment No. 1 Pages: 17 Feb. 2003
IPS-E-PR-230 (0)
Oct. 1996
IPS-E-PR-308 (0)
Mar. 1996
Engineering Standard for Piping & Instrumentation Diagrams (P & IDs)
Engineering Standard for Numbering System Amendment No. 1 June. 2003
Amendment No. 1 Pages: 110
Oct. 2002
Pages: 41
IPS-E-PR-250 (0)
July 1997
IPS-E-PR-310 (0)
Dec. 1997
Engineering Standard for Performance Guarantee Amendment No. 1 Pages: 30 Dec. 2003
Engineering Standard for Process Design of Water Systems Amendment No. 1 Pages: 59 Apr. 2006
31
Oct. 2007 Process Chemical
IPS-E-GN-000(4)
IPS-E-PR-330 (0)
Nov. 1993
IPS-E-PR-410 (0)
Mar. 1996
Engineering Standard for Process Design of Compressed Air Systems Amendment No. 1 Pages: 27 Dec. 1998
Engineering Standard for Process Design of Hot Oil & Tempered Water Circuits Amendment No. 1 Pages: 16 May 2003
IPS-E-PR-340 (0)
Mar. 1996
IPS-E-PR-420 (0)
Jan. 1996
Engineering Standard for Process Design of Fuel Systems
Engineering Standard for Process Design of Heat Tracing & Winterizing Amendment No.1 Pages: 27 Mar. 2001
Amendment No. 1 Pages: 18
July 2002
IPS-E-PR-360 (0)
Dec. 1997
IPS-E-PR-440 (0)
Mar. 1996
Engineering Standard for Process Design of Liquid & Gas Transfer & Storage Amendment No. 1 Pages: 45 July 2006
Engineering Standard for Process Design of Piping Systems (Process Piping & Pipeline Sizing) Amendment No. 1 Pages: 43 Aug. 2003
IPS-E-PR-370 (0)
Dec. 1997
IPS-E-PR-450 (0)
Dec. 1997
Engineering Standard for Process Design of Loading & Unloading Facilities for Road Tankers Amendment No. 1 Pages: 33 July 2004
Engineering Standard for Process Design of Pressure Relieving Systems Inclusive Safety Relief Valves Amendment No. 1 Pages: 39 May 2005
IPS-E-PR-380 (0)
Dec. 1997
IPS-E-PR-460 (0)
July 1994
Engineering Standard for Process Design of Solids Handling Systems
Engineering Standard for Process Design of Flare & Blow down Systems
Amendment No. 1 Pages: 21
Aug. 2004
Amendment No. 1 Pages: 36
June 1999
IPS-E-PR-400 (0)
July 1994
IPS-E-PR-470 (0)
Mar. 1996
Engineering Standard for Process Design of Cooling Water Circuits Amendment No. 1 Amendment No. 2 Pages: 23 Feb. 1999 Oct. 2004
Engineering Standard for Process Design of Emergency Measures Amendment No.1 Pages: 10 June 2002
32
Oct. 2007 Process Chemical
IPS-E-GN-000(4)
IPS-E-PR-491 (1)
Oct. 2006
IPS-E-PR-730 (0)
Dec. 1997
Engineering Standard for Process Requirements of Crude Distillation and Hydrogen Production Units
Engineering Standard for Process Design of Plant Waste Water Treatment & Recovery Systems
Pages: 40 Pages: 89
IPS-E-PR-492 (1)
Aug. 2006
IPS-E-PR-735 (0)
Dec. 1997
Engineering Standard for Process Requirements of Caustic and Chemical Systems
Engineering Standard for Process Design of Plant Solid Waste Treatment & Disposal Systems Amendment No. 1 Aug. 2005
Pages: 28
Pages: 38
IPS-E-PR-500 (0)
Dec. 1997
IPS-E-PR-745 (0)
Aug. 1993
Engineering Standard for Process Design of LPG Recovery & Splitter Units Amendment No. 1 Pages: 12 Dec. 2002
Engineering Standard for Process Design of Vacuum Equipment (Vacuum Pumps and Steam Jet Ejectors) Amendment No. 1 Pages: 30 Aug. 1998
IPS-E-PR-551 (0)
Dec. 1997
IPS-E-PR-750 (0)
May 1997
Engineering Standard for Process Design of Gas Treating Units Amendment No. 1 Pages: 26 Jan. 2005
Engineering Standard for Process Design of Compressors
Amendment No. 1 Pages: 33
Feb. 2005
IPS-E-PR-700 (0)
July 1995
IPS-E-PR-755 (0)
Aug. 1993
Engineering Standard for Process Design of Crude Oil Electrostatic Desalters
Engineering Standard for Process Design of Fans and Blowers
Amendment No. 1 Pages: 12
June 2000
Amendment No. 1 Pages: 24
July 1998
IPS-E-PR-725 (0)
Mar. 1996
IPS-E-PR-771 (0)
July 1997
Engineering Standard for Process Design of Plant Waste Water Sewer Systems Amendment No. 1 Pages: 56 Aug. 2002
Engineering Standard for Process Requirements of Heat Exchanging Equipment Amendment No. 1 Pages: 42 Dec. 2003
33
Oct. 2007 Process Chemical
IPS-E-GN-000(4)
IPS-E-PR-775 (0)
July 1995
IPS-E-PR-845 (0)
Oct. 1996
Engineering Standard for Process Design of Double Pipe Heat Exchangers Amendment No. 1 Pages: 7 June. 2000
Engineering Standard for Process Design of Steam Traps Amendment No. 1 Pages: 19 Feb. 2003
IPS-E-PR-785 (0)
Jan. 1996
IPS-E-PR-850 (0)
June 1999
Engineering Standard for Process Design of Air Cooled Heat Exchangers (Air Coolers) Amendment No. 1 Pages: 17 Sep.2001
Engineering Standard for Process Requirements of Vessels, Reactors & Separators Amendment No. 1 Pages: 44 Dec. 2005
IPS-E-PR-790 (0)
Jan. 1996
IPS-E-PR-880 (0)
May 1997
Engineering Standard for Process Design of Cooling Towers Amendment No. 1 Pages: 30 Nov. 2001
Engineering Standard for Process Design of Gas (Vapor) - Liquid Separators Amendment No. 1 Pages: 40 Jan. 2006
IPS-E-PR-800 (0)
July 1997
IPS-E-PR-895 (0)
July 1997
Engineering Standard for Process Design of Steam Boilers Amendment No. 1 Pages: 39 Jan. 2004
Engineering Standard for Process Design of Solid-Liquid Separators Amendment No. 1 Pages: 30 Jan. 2006
IPS-E-PR-810 (0)
Dec. 1997
IPS-E-PR-905 (0)
Dec. 1997
Engineering Standard for Process Design of Furnaces Amendment No. 1 Sep. 2005
Engineering Standard for Process Design of Dryers Amendment No. 1 Feb. 2007
Pages: 40
Pages: 42
IPS-E-PR-830 (0)
Dec. 1997
Engineering Standard for Process Design of Valves & Control Valves Amendment No. 1 Pages: 31 Nov. 2005
34
Oct. 2007
IPS-E-GN-000(4)
Safety, Fire Fighting & Environmental Pollution Control
IPS-C-SF-242 (0)
Dec. 1997Quality Control &
IPS-E-SF-140 (0)Engineering Standard Proportioning Systems Amendment No. 1 Amendment No. 2 Pages: 46 for
May 1993Foam Generating and
Standard for Delivery, Inspection, Commissioning of Fire Fighting Pumps Amendment No. 1 Pages: 11 May 2004
Dec. 1998 July 2006
IPS-C-SF-505 (0)
May 1997
IPS-E-SF-160 (0)
Aug. 1993Gas Fire Extinguishing
Standard for Installation, Inspection & Testing of Fire Fighting Fixed Systems
Engineering Standard for CO2 Systems Amendment No. 1 Amendment No. 2 Pages: 36 Feb. 1999 Aug. 2006
Amendment No. 1 Pages: 21
May 2003
IPS-C-SF-507 (0)
July 1997
IPS-E-SF-180 (0)
Aug. 1993
Standard for Training Facilities & Fire Fighters Qualifications Amendment No. 1 Pages: 12 Feb. 2004
Engineering Standard for Dry Chemical Fire Extinguishing System Amendment No. 1 Amendment No. 2 Pages: 38 Feb. 1999 Oct. 2006
IPS-C-SF-550 (0)
Mar.1996
IPS-E-SF-200 (0)
Nov. 1993
Application Standard for Safety Boundary Limit Amendment No. 1 Pages: 13 Nov. 2000
Engineering Standard for Fire Fighting Sprinkler Systems Amendment No. 1 Jan. 2000
Pages: 66
IPS-E-SF-100 (0)
Aug. 1993
IPS-E-SF-220 (0)
Nov. 1993
Engineering Standard for Classification of Fires and Fire Hazard Properties Amendment No. 1 Amendment No. 2 Pages: 23 July 1998 Oct. 2005
Engineering Standard for Fire Water Distribution and Storage Facilities Amendment No. 1 Amendment No. 2 Pages: 31 May 1998 May 2007
IPS-E-SF-120 (0)
May 1993
IPS-E-SF-260 (0)
May 1993
Engineering Standard for Offshore Installation Fire Fighting and Fire Protection Amendment No. 1 Pages: 18 July 1998
Engineering Standard for Automatic Detectors and Fire Alarm Systems
Amendment No. 1 Pages: 15
Aug. 1998
35
Oct. 2007
IPS-E-GN-000(4)
Safety, Fire Fighting & Environmental Pollution Control
IPS-E-SF-300 (0)
Nov. 1993
IPS-E-SF-860 (1)
Oct. 2007
Engineering Standard for Application of Breathing Apparatus in Safety and Fire Fighting Amendment No. 1 Pages: 41 Mar. 2000
Engineering Standard for Air Pollution Control
Pages: 108
IPS-E-SF-340 (0)
Nov. 1993
IPS-E-SF-880 (1)
Nov. 2005
Engineering Standard for Fire Fighting Hose Box and/or Shelter Amendment No. 1 Pages: 5 May. 2000
Engineering Standard for Water Pollution Control
Pages: 30
IPS-E-SF-380 (0)
Nov. 1993
IPS-G-SF-100 (0)
July 1994
Engineering Standard for Fire Protection in Buildings Amendment No. 1 Pages: 30 May. 2000
Engineering and Equipment Standard for Fire Fighting Trucks and Pumps Amendment No. 1 Pages: 72 Oct. 2000
IPS-E-SF-400 (0)
July 1997
IPS-G-SF-110 (0)
May 1997
Engineering Standard for Industrial Stairs, Ladders, Platforms, and Scaffolds Amendment No. 1 Pages: 96 June 2003
General Standard for Protection Against Radioactive Sealed Sources Amendment No. 1 Pages: 81 Oct. 2003
IPS-E-SF-504 (0)
July 1995
IPS-G-SF-126 (0)General Standard Extinguishers Amendment No.1 for
Oct. 1996Hand & Wheel Type Fire
Engineering Standard for Fire Fighting Vessels Amendment No. 1 Pages: 31 Oct. 2000
Feb. 2001
Pages: 55
IPS-E-SF-520 (0)
Nov. 1993
IPS-G-SF-130 (0)
Dec. 1997
Engineering Standard for Fire Stations
General Standard for Disposal of Solid Waste Amendment No. 1 July 2004
Amendment No. 1 Pages: 10
May. 2000 Pages: 34
36
Oct. 2007
IPS-E-GN-000(4)
Safety, Fire Fighting & Environmental Pollution Control
IPS-G-SF-140 (0)
Mar. 1996
IPS-G-SF-355 (0)
Oct. 1996
General Standard for Masks & Breathing Apparatus
General Standard for Safety Portable Ladders Amendment No. 1 Aug. 2002
Amendment No. 1 Pages: 73
Oct. 2000 Pages: 60
IPS-G-SF-202 (0)
Dec. 1997
IPS-G-SF-440 (0)
May 1997
General Standard for Mains Water, Sprinklers, DCP, CO2 & Foam Systems Amendment No. 1 Pages: 48 Aug. 2004
General Standard for Fire Protection in General & Explosive Stores
Amendment No. 1 Pages: 47
Aug. 2003
IPS-G-SF-240 (0)
Oct. 1996
IPS-G-SF-460 (0)
Dec. 1997
Engineering and Material Standard for Fire Fighting Pump Systems & Trailers Amendment No. 1 Pages: 26 Dec. 2000
General Standard for First Aids & Sanitation Amendment No. 1 Nov. 2004
Pages: 65
IPS-G-SF-310 (0)
May 1997
IPS-G-SF-503 (0)
Oct. 1996
General Standard for Gas Detectors
General Standard for Delivery-Commissioning, Preventive Maintenance of Fire Fighting Trucks Amendment No. 1 Pages: 16 June. 2001
Amendment No. 1 Pages: 26
Nov. 2002
IPS-G-SF-340 (0)
May 1997
IPS-G-SF-540 (0)
Dec. 1997
General Standard for Ancillary and Miscellaneous Safety and Fire Equipment Amendment No. 1 Pages: 41 Dec. 2002
General Standard for Safety & Fire Training Centers Fire Station Facilities Amendment No. 1 Pages: 21 Oct. 2004
IPS-G-SF-345 (0)
Oct. 1996
IPS-G-SF-860 (0)
July 1997
General Standard for Safety Belts
General Standard for Air Pollution Control
Amendment No. 1 Pages: 27
Feb. 2003
Amendment No. 1 Pages: 39
Dec. 2003
37
Oct. 2007
IPS-E-GN-000(4)
Safety, Fire Fighting & Environmental Pollution Control
IPS-G-SF-870 (0)
Dec. 1997
IPS-M-SF-455 (0)
Oct. 1996
General Standard for Soil Pollution Control
Material and Equipment Standard for Fire Blanket-Fire Fighters Suits (Fire-Proof Types) Fire-Resisting Curtain & Shields Amendment No. 1 Pages: 20 Oct. 2002
Amendment No. 1 Pages: 60
Oct. 2005
IPS-G-SF-880 (0)
Dec. 1997
IPS-M-SF-504 (0)
Mar. 1996
General Standard for Water Pollution Control Amendment No. 1 Aug. 2005
Material and Equipment Standard for Fire-Fighting Vessels Amendment No. 1 July 2002
Pages: 32
Pages: 13
IPS-G-SF-900 (0)
Dec. 1997
General Standard for Noise Control and Vibration Amendment No. 1 Pages: 29 Jan. 2005
IPS-M-SF-105 (0)
Mar 1996
Material and Equipment Standard for Valves, Reels, Hoses, Nozzles and Monitors for Fire Fighting Amendment No. 1 Pages: 90 Jan. 2001
IPS-M-SF-142 (0)
Mar. 1996
Material and Equipment Standard for FLC-Foam Proportioners Generators and Twin Agents Amendment No. 1 Pages: 42 Feb. 2001
IPS-M-SF-325 (0)
July 1997
Material and Equipment Standard for Personnel Safety and Fire Fighters Protective Equipment Amendment No. 1 Pages: 162 Feb. 2006
38
Oct. 2007 Technical Protection
IPS-E-GN-000(4)
IPS-C-TP-101 (0)
Jan. 1996
IPS-C-TP-820 (0)
Dec. 1997
Construction Standard for Surface Preparation Amendment No. 1 Pages: 117 Nov. 2000
Construction Standard for Cathodic Protection Amendment No. 1 Pages: 98 Jan. 2005
IPS-C-TP-102 (0)
Jan. 1996
IPS-E-TP-100 (0)
July 1994
Construction Standard for Painting Amendment No. 1 June 2003
Engineering Standard for Paints Amendment No. 1 Amendment No. 2 Amendment No. 3 Pages: 69 Oct. 2000 Feb. 2004 Nov. 2006
Pages: 77
IPS-C-TP-274 (0)
Dec. 1997
IPS-E-TP-270 (0)
Dec. 1997
Construction Standard for Protective Coating
Engineering Standard for Protective Coatings for Buried and Submerged Steel Structures Amendment No. 1 Pages: 30 May. 2004
Amendment No. 1 Pages: 37
Aug. 2004
IPS-C-TP-352 (0)
Dec. 1997
IPS-E-TP-350 (0)
Dec. 1997
Construction Standard for Lining Amendment No. 1 Nov. 2004
Engineering Standard for Linings Amendment No. 1 Aug. 2004
Pages: 121
Pages: 92
IPS-C-TP-701 (0)
Dec. 1997
IPS-E-TP-700 (0)
Jan. 1996
Construction Standard for Application of Thermal Insulation Amendment No. 1 Pages: 87 Feb. 2003
Engineering Standard for Thermal Insulations Amendment No. 1 Pages: 88 Nov. 2002
IPS-C-TP-742 (0)
Dec. 1997
IPS-E-TP-740 (0)
Dec. 1997
Construction Standard for Corrosion Consideration During Fabrication & Installation
Engineering Standard for Corrosion Consideration in Material Selection Amendment No. 1 Nov. 2006
Pages: 77 Pages: 92
39
Oct. 2007 Technical Protection
IPS-E-GN-000(4)
IPS-E-TP-760 (0)
Dec. 1997
IPS-M-TP-105 (0)
May 1993
Engineering Standard for Corrosion Consideration in Design
Material and Equipment Standard for Asphalt Mastic (Cold Applied) Amendment No. 1 Amendment No. 2 Pages: 9 June 1998 Aug. 2006
Amendment No. 1 Pages: 228
July 2005
IPS-E-TP-780 (0)
Dec. 1997
IPS-M-TP-110 (0)
May 1993Paint
Engineering Standard for Chemical Control of Corrosive Environments
Material and Equipment Standard for Vinyl (Aluminum) as Intermediate and Top Coat (Finish) Amendment No. 1 June 1998
Pages: 149
Pages: 8
IPS-E-TP-820 (0)
Dec. 1997
IPS-M-TP-115 (0)
May 1993
Engineering Standard for Cathodic Protection Amendment No. 1 Pages: 110 Jan. 2005
Material and Equipment Standard for Red Lead, Iron Oxide, Raw Linseed Oil and Alkyd Primer Amendment No. 1 Amendment No. 2 Pages: 8 June 1998 Nov. 2006
IPS-G-TP-335 (0)
Dec. 1997
IPS-M-TP-120 (0)
May 1993
Material and Construction Standard for Three Layer Polyethylene Coating System Amendment No. 1 Amendment No. 2 Pages: 43 Aug. 2002 Feb. 2007
Material and Equipment Standard for Red Lead, Iron Oxide and Alkyd Intermediate Paint Amendment No. 1 Amendment No. 2 Pages: 8 June 1998 Nov. 2006
IPS-I-TP-802 (0)Inspection Standard Evaluation Amendment No. 1 Pages: 62 for
Dec. 1997Corrosion Survey & Inhibitor
IPS-M-TP-125 (0)
May 1993
Material and Equipment Standard for White Alkyd Paint for Top Coat (Finish) Amendment No. 1 Pages: 8 June 1998
June 1998
IPS-I-TP-820 (0)
Dec. 1997
IPS-M-TP-130 (0)
May 1993
Inspection Standard for Monitoring Cathodic Protection Systems Amendment No. 1 Pages: 120 March 2006
Material and Equipment Standard for Colored Alkyd Paint for Top Coat (Finish) Except White Amendment No 1 Pages: 8 Aug. 1998
40
Oct. 2007 Technical Protection
IPS-E-GN-000(4)
IPS-M-TP-135 (0)
May 1993
PS-M-TP-165 (0)
May 1993
Material and Equipment Standard for Chlorinated Rubber Paint for Top Coat (Finish) Amendment No. 1 Pages: 9 Aug. 1998
Material and Equipment Standard for Alkyd Paint (Black) as Intermediate and Top Coat (Finish) Amendment No. 1 Pages: 7 Sep. 1998
IPS-M-TP-140 (0)
Aug. 1993
IPS-M-TP-168 (1)
Feb. 2001
Material and Equipment Standard for Chlorinated Rubber Paint for Intermediate Coat Amendment No. 1 Pages: 8 Dec. 1998
Material Standard for Acrylic Silicone Finish Paint for Temperature Applications Up to 230C
Pages: 7
IPS-M-TP-145 (0)
Nov. 1993
IPS-M-TP-170 (0)
May 1993
Material and Equipment Standard for Chlorinated Rubber Inhibitive Primer
Material and Equipment Standard for Vinyl Paint (Black) as Intermediate and Top Coat (Finish)
Amendment No. 1 Pages: 10
Jan. 1999
Amendment No. 1 Pages: 7
Sep. 1998
IPS-M-TP-150 (0)
Aug. 1993
IPS-M-TP-175 (0)
May 1993
Material and Equipment Standard for Alkyd Paint (Aluminum) Leafing as Top Coat (Finish) Amendment No. 1 Jan. 1998
Material and Equipment Standard for Silicone Alkyd Paint (White or Colored) as Top Coat (Finish)
Amendment No. 1 Pages: 8 Pages: 10
Sep. 1998
IPS-M-TP-155 (0)
Aug. 1993
IPS-M-TP-180 (0)
May 1993
Material and Equipment Standard for Alkyd Paint (Aluminum) Non - Leafing as Intermediate Amendment No. 1 Pages: 8 Dec. 1998
Material and Equipment Standard for Wash Primer (Basic Zinc Chromate Vinyl Butyral) Amendment No. 1 Pages: 11 Nov. 1998
IPS-M-TP-160 (0)
Aug. 1993
IPS-M-TP-185 (0)
Oct. 1996
Material and Equipment Standard for Alkyd Paint (High Build Thixotropic Leafing Aluminum) as Top Coat Finish Amendment No. 1 Pages: 9 Feb 1999
Material and Equipment Standard for Vinyl Red Lead Primer Amendment No. 1 Pages: 9 May 2000
41
Oct. 2007 Technical Protection IPS-M-TP-190 (0) Aug. 1993 IPS-M-TP-220 (0)
IPS-E-GN-000(4)
May 1993
Material and Equipment Standard for Coal Tar Epoxy Polyamide Paint as Primer, Intermediate and Top Coat (Finish) Amendment No. 1 Pages: 11 Feb. 1999
Material and Equipment Standard for Epoxy Polyamide Paint as Intermediate Paint Amendment No. 1 Pages: 8 Nov. 1998
IPS-M-TP-200 (0)
Aug. 1993
IPS-M-TP-225 (0)
May 1993
Material and Equipment Standard for Vinyl Paint (White or Colored) as Primer, Intermediate and Top Coat (Finish) Amendment No. 1 Pages: 8 Feb. 1999
Material and Equipment Standard for Epoxy Polyamide Paint as Top Coat (Finish) Amendment No. 1 Pages: 9 Dec. 1998
IPS-M-TP-202 (0)
Oct. 1996
IPS-M-TP-230 (0)
Aug. 1993
Material and Equipment Standard for Tow Pack Amine-Adduct Cured Epoxy Paint as Primer, Intermediate and Top Coat Amendment No. 1 Pages: 6 May 2000
Material and Equipment Standard for Coal Tar Mastic (Cold Applied) Amendment No. 1 Pages: 7 May 1999
IPS-M-TP-205 (0)
Aug. 1993
IPS-M-TP-235 (0)
July 1994
Material and Equipment Standard for Zinc Rich Epoxy Paint (Organic Zinc-Rich) as Primer, Intermediate and Top Coat (Finish) Amendment No. 1 May 1999 Pages: 8
Material and Equipment Standard for Two Pack Aliphatic Polyurethane Paint as Top Coat (Finish) Amendment No. 1 Pages: 10 July 1999
IPS-M-TP-210 (0)
May 1993
IPS-M-TP-240 (0)
Oct. 1996
Material and Equipment Standard for Zinc Silicate (Inorganic Zinc-Rich) Paint as Primer, Intermediate and Top Coat Amendment No. 1 Pages: 8 Nov. 1998
Material and Equipment Standard for Two Pack Aliphatic Polyurethane Paint as Top Coat (Camouflage Colors) Amendment No. 1 Pages: 11 July 2003
IPS-M-TP-215 (0)
Nov. 1993
IPS-M-TP-250 (0)
Mar. 1996
Material and Equipment Standard for Epoxy Polyamide Primer
Material and Equipment Standard for Amine-Cured Epoxy Resin as Primer, Intermediate, and Top Coat for Atmospheric Environment Amendment No. 1 Pages: 6 July 2000
Amendment No. 1 Pages: 9
May 1999
42
Oct. 2007 Technical Protection IPS-M-TP-275 (0) Oct. 1996 IPS-M-TP-305 (0)
IPS-E-GN-000(4)
Aug. 1993
Material and Equipment Standard for Fast Drying Synthetic Primer for Use with Hot Applied Coal Tar or Bitumen (Asphalt) Enamels Amendment No. 1 Pages: 8 July 2000
Material and Equipment Standard for Coal Tar Impregnated Glass Fiber Mat for Outer Wrap
Amendment No. 1 Pages: 7
July 1999
IPS-M-TP-280 (0)
July 1994
IPS-M-TP-306 (0)
July 1994
Material and Equipment Standard for Coal Tar Primer (Cold Applied) for Use with Hot Applied Coal Tar Enamel (IPS-M-TP290) Amendment No. 1 Aug. 1999 Pages: 8
Material and Equipment Standard for Bitumen Impregnate Glass Fiber Mat for Outer wrap Amendment No. 1 Pages: 8 Aug. 1999
IPS-M-TP-285 (0)
July 1994
IPS-M-TP-310 (0)
July 1994
Material and Equipment Standard for Bitumen Primer (Cold Applied) for Use with Hot Applied Bitumen Enamel (IPS-M-TP295) Amendment No. 1 Pages: 9 Aug. 1999
Material Standard for Cold Applied Laminated Plastic Tape as Inner Layer Tape for Tape Coating System of Buried Steel Pipes Amendment No. 1 Pages: 8 Oct. 1999
IPS-M-TP-290 (0)
May 1993
IPS-M-TP-311 (0)
July 1995
Material and Equipment Standard for Coal Tar Enamel (Hot Applied)
Material Standard for Cold Applied Laminated Plastic Tape as Outer Layer Tape for Tape Coating System of Buried Steel Pipes Amendment No. 1 Pages: 7 Oct. 1999
Amendment No. 1 Pages: 7
Jan. 1999
IPS-M-TP-295 (0)
July 1995
IPS-M-TP-313 (0)
July 1995
Material Standard for Bitumen Enamel (Hot Applied)
Material Standard for Hand-Applied Laminated Tape Suitable for Cold-Applied Tape Coating System Amendment No. 1 Pages: 7 Nov. 1999
Amendment No. 1 Pages: 9
Aug. 1999
IPS-M-TP-300 (0)
Aug. 1993
IPS-M-TP-314 (0)
July 1994
Material and Equipment Standard for Glass Fiber Mat for Inner Wrap Amendment No. 1 Pages: 8 July. 1999
Material Standard for Hand Applied Laminated Tape (Suitable for Hot Applied Coating Systems) Amendment No. 1 Pages: 7 Nov. 1999
43
Oct. 2007 Technical Protection
IPS-E-GN-000(4)
IPS-M-TP-315 (0)
July 1995
IPS-M-TP-323 (0)
July 1993
Material Standard for Perforated Plastic Tape (as Rockshield) for Pipe Coating
Material Standard for Primer for Use with Hand-Applied Laminated Tape Suitable for Hot-Applied Tape Coating Systems Amendment No. 1 Pages: 9 Feb. 2000
Amendment No. 1 Pages: 7
Jan 2000
IPS-M-TP-316 (0)
July 1995
IPS-M-TP-672 (0)
July 1995
Material Standard for Plastic Grid (as Rockshield) for Pipe Coating Amendment No. 1 Pages: 7 Jan. 2000
Material and Equipment Standard for Inhibitor, Anti-Icing for Use in Jet Turbine Fuels Amendment No. 1 Pages: 6 Feb. 2000
IPS-M-TP-317 (0)
Jan. 1996
IPS-M-TP-673 (0)
July 1995
Material Standard for Hand-Applied Petrolatum Tape and Primer
Material Standard for Inhibitor for Hydrochloric Acid as Descaling and Pickling Solution
Amendment No. 1 Pages: 18
Oct. 2003
Amendment No. 1 Pages: 6
Feb. 2000
IPS-M-TP-318 (0)
Oct. 1996Cross-Linked
IPS-M-TP-675 (0)
Dec. 1997
Material Standard for Heat-Shrinkable Polyethylene Coatings (Two Layers) Amendment No. 1 Pages: 8 Dec. 2003
Material and Equipment Standard for Inhibiting Package for Cooling Water Systems Amendment No. 1 Pages: 10 Jan. 2004
IPS-M-TP-321 (0)
July 1995
IPS-M-TP-676 (0)
Dec. 1997
Material Standard for Primers (Ditch and Yard) for Use with Cold-Applied Laminated Plastic Tape (IPS-M-TP-310) for Tape Coating System of Buried Steel Pipes Amendment No. 1 Pages: 11 Jan. 2000
Material and Equipment Standard for Inhibitor for Hydrochloric Acid and HCl + HF as Descaling and Pickling Solution for Oil and Gas Wells Amendment No. 1 Pages: 6 May 2001
IPS-M-TP-322 (0)
July 1995
IPS-M-TP-710 (0)
Dec. 1997
Material Standard for Primer for Use with Hand-Applied Laminated Tape Suitable for Cold-Applied Tape Coating System Amendment No. 1 Pages: 9 Feb. 1999
Material and Equipment Standard for Thermal Insulation
Amendment No. 1 Pages: 92
Feb. 2003
44
Oct. 2007 Technical Protection
IPS-E-GN-000(4)
IPS-M-TP-750 (0)
Dec. 1997
Material and Equipment Standard for Cathodic Protection Amendment No. 1 Mar. 2006
Pages: 182
45
Oct. 2007
IPS-E-GN-000(4)
THE LIST OF STANDARD DRAWINGS CLASSIFIED BY SUBJECT
46
Oct. 2007
IPS-E-GN-000(4)
Heating, Ventilation, Air Conditioning Cooling & Refrigeration
IPS-D-AR-010 (0)
Nov. 1997
IPS-D-AR-018 (0)
Nov. 1997
Abbreviations & Symbols for HVAC & R Drawings Sheet(s): 12 A4
Hook Up Layout for Heat Generation and Fuel Tank System Sheet(s): 2 A4, 1 A3, 1 A2
IPS-D-AR-011 (0)
Nov. 1997
IPS-D-AR-019 (0)
Nov. 1997
General Notes for HVAC & R System Sheet(s): 7 A4
Typical Pump Installation Details Sheet(s): 2 A4, 2 A3
IPS-D-AR-012 (0)Pipe Supports Sheet(s): 4 A4, 2 A3
Nov. 1997
IPS-D-AR-013 (0)
Nov. 1997
Details of Duct Fabrication & Supports Sheet(s): 10 A4, 1 A3
IPS-D-AR-014 (0)
Nov. 1997
Equipment Installation Details of Fans, Room Air Conditioners & Desert Coolers Sheet(s): 3 A4, 1 A3
IPS-D-AR-017 (0)
Nov. 1997
Air Balancing & Kitchen Ventilation System Sheet(s): 8 A4
47
Oct. 2007 Civil
IPS-E-GN-000(4)
IPS-D-CE-101 (0)
Nov. 1997
IPS-D-CE-176 (0)Typical Ditch Cross-Section
Nov. 1997
Structural Steel Connections Shear Connection Beam to Column Flange Sheet(s): 6 A3
Sheet(s):
1 A3
IPS-D-CE-104 (0)
Nov. 1997
IPS-D-CE-177 (0)
Nov. 1997
Fire Proofing of Structural Members Typical Details Sheet(s): 2 A3
Footpath Crossing Over Ditches Sheet(s): 1 A3
IPS-D-CE-141 (0)
Nov. 1997
IPS-D-CE-190 (0)
Nov. 1997
Industrial Stair & Handrail Typical Details All Process Units Sheet(s): 4 A3
Valve Chambers & Trenches for Water Pipes (Typical)
Sheet(s):
3 A3
IPS-D-CE-142 (0)Industrial Platform and Stairs Sheet(s): 3 A3
Nov. 1997
IPS-D-CE-191 (0)Typical Septic Tank Sheet(s): 1 A3
Nov. 1997
IPS-D-CE-150 (0)
Nov. 1997
IPS-D-CE-201 (0)
Nov. 1997
Structural Steel Connections Moment Connection Flush end Plate for HEA 200 Beam Sheet(s): 1 A3
Anchor Bolts (Type, L, S, LS, JS, T, S, U, B)
Sheet(s):
4 A3
IPS-D-CE-175 (0)
Nov. 1997
IPS-D-CE-210 (0)
Nov. 1997
Details of Precast Concrete Kerbs, Ditch Inverts and Road Channels Sheet(s): 1 A3
Architectural Details of A Building Legend of Sectional References Sheet(s): 1 A3
48
Oct. 2007 Civil
IPS-E-GN-000(4)
IPS-D-CE-211 (0)
Nov. 1997
IPS-D-CE-217 (0)Roof Drain Details Sheet(s): 2 A3
Nov. 1997
Parapet Wall Details with R.C. Lintel and Canopy Sheet(s): 2 A3
IPS-D-CE-212 (0)
Nov. 1997
IPS-D-CE-218 (0)Details of Steel & R.C. Lintels
Nov. 1997
Details for Sink, W.H. Basin, W. C. Bath Tub and Shower Tray
Sheet(s):
2 A3
Sheet(s):
2 A3
IPS-D-CE-213 (0)Chimney Sectional Details Sheet(s): 2 A3
Nov. 1997
IPS-D-CE-219 (0)A.C. Unit Installation Details Sheet(s): 1 A3
Nov. 1997
IPS-D-CE-214 (0)False Ceiling Details
Nov. 1997
IPS-D-CE-220 (0)
Nov. 1997
Floor Slab, Wall Base & Foundation
Sheet(s):
2 A3
Sheet(s):
2 A3
IPS-D-CE-215 (0)
Nov. 1997
IPS-D-CE-221 (0)Expansion Joints
Nov. 1997
Corrugated M.S Galvanized Sheeting Connection Details for Roofs &Walls Sheet(s): 1 A3
Sheet(s):
2 A3
IPS-D-CE-216 (0)Window Sill Sheet(s): 1 A3
Nov. 1997
IPS-D-CE-222 (0)Ceiling Details Sheet(s): 2 A3
Nov. 1997
49
Oct. 2007 Civil
IPS-E-GN-000(4)
IPS-D-CE-233 (0)Typical Grease Trap Details Sheet(s): 1 A3
Nov. 1997
IPS-D-CE-401 (0)
Nov. 1997
Bund Walls Steps & Pipe Sleeve Sheet(s): 2 A3
IPS-D-CE-240 (0)Typical Soakaway Pit Sheet(s): 1 A3
Nov. 1997
IPS-D-CE-411 (0)
Nov. 1997
Half-Buried 1000 M Reinforced Concrete Reservoir Sheet(s): 7 A2
IPS-D-CE-241 (0)
Nov. 1997
IPS-D-CE-412 (0)30 M Elevated Water Tank Sheet(s): 4 A2
Nov. 1997
Reinforced Concrete Catch Basin (All Area) Sheet(s): 1 A3
IPS-D-CE-250 (0)Brick Sanitary Manholes Sheet(s): 3 A3
Nov. 1997
IPS-D-CE-500 (0)
Nov. 1997
Classification of Sanitary Drain Systems Sheet(s): 3 A4
IPS-D-CE-251 (0)Concrete Sanitary Manholes Sheet(s): 2 A3
Nov. 1997
IPS-D-CE-501 (0)
Nov. 1997
Discharge Stack & Branch Connections Sheet(s): 2 A3
IPS-D-CE-252 (0)
Nov. 1997
IPS-D-CE-502 (0)
Nov. 1997
Manhole Covers & Frames Heavy Gray Cast Iron 600 Diameter Sheet(s): 2 A3
Ventilating Stacks & Ventilating Pipes
Sheet(s):
1 A3
50
Oct. 2007 Civil
IPS-E-GN-000(4)
IPS-D-CE-503 (0)
Nov. 1997
Branch Discharge Pipes to Ranges of Appliance Sheet(s): 2 A4
51
Oct. 2007 Electrical
IPS-E-GN-000(4)
IPS-D-EL-100 (0)
Nov. 1997
IPS-D-EL-204 (0)
Nov. 1997
Reference Drawing Electrical Standard Drawing List Category 200 Sheet(s): 1 A3
Reference Drawing Power Installation Details, Power Receptacle Category 200 Sheet(s): 1 A3
IPS-D-EL-101 (0)
Nov. 1997
IPS-D-EL-205 (0)
Nov. 1997
Reference Drawing Electrical Symbols, Abbreviations, Device No. & General Notes Category 100 Sheet(s): 12 A3
Reference Drawing Power Installation Details, Stub Up Conduit Pipe Category 200 Sheet(s): 1 A3
IPS-D-EL-200 (0)
Nov. 1997
IPS-D-EL-206 (0)
Nov. 1997
Reference Drawing Power Installation Details, Index Sheet Category 200 Sheet(s): 1 A3
Reference Drawing Power Installation Details, Cable Termination for Motor Category 200 Sheet(s): 1 A3
IPS-D-EL-201 (0)
Nov. 1997
IPS-D-EL-207 (0)
Nov. 1997 Cable
Reference Drawing Power Installation Details, LV Motor (Horizontal) Category 200 Sheet(s): 1 A3
Reference Drawing Power Installation Details Identification Number & Location Category 200 Sheet(s): 1 A3
IPS-D-EL-202 (0)
Nov. 1997
IPS-D-EL-208 (0)
Nov. 1997
Reference Drawing Power Installation Details, MV Motor (Vertical) Category 200 Sheet(s): 1 A3
Reference Drawing Power Installation Details Cable Route Marker & Location Category 200 Sheet(s): 1 A3
IPS-D-EL-203 (0)
Nov. 1997 Details, Motor
IPS-D-EL-209 (0)
Nov. 1997
Reference Drawing Power Installation Operated Valve (Ontank) Category 200
Reference Drawing Power Installation Details Concrete Cable Duct Bank (Road Crossing) Category 200
Sheet(s):
1 A3
Sheet(s):
1 A3
52
Oct. 2007 Electrical
IPS-E-GN-000(4)
IPS-D-EL-210 (0)
Nov. 1997 Installation Details (Cable
IPS-D-EL-218 (0)
Nov. 1997
Reference Drawing Power Trenches) Category 200 Sheet(s): 2 A3
Reference Drawing Power Installation Details Conduit Selection Chart Category 200 Sheet(s): 1 A3
IPS-D-EL-211 (0)
Nov. 1997
IPS-D-EL-219 (0)
Nov. 1997
Reference Drawing Power Installation Details Category 200 Conduit & Cable Supports Sheet(s): 1 A3
Reference Drawing Power Installation Details Cable Gland Selection Chart Category 200 Sheet(s): 1 A3
IPS-D-EL-213 (0)
Nov. 1997
IPS-D-EL-300 (0)
Nov. 1997
Reference Drawing Power Installation Details Category 200 Multiple Control Station Sheet(s): 1 A3
Reference Drawing Lighting Installation Detail (Index Sheet) Category 300 Sheet(s): 1 A3
IPS-D-EL-215 (0)
Nov. 1997
IPS-D-EL-303 (0)
Nov. 1997
Reference Drawing Power Installation Details Category 200 Cable Room Sheet(s): 1 A3
Reference Drawing Lighting Installation Details Fluorescent Light (Mounted on Steel Beam) Category 300 Sheet(s): 1 A3
IPS-D-EL-216 (0)
Nov. 1997
IPS-D-EL-304 (0)
Nov. 1997
Reference Drawing Power Installation Details Stanchion for Control Station Category 200 Sheet(s): 1 A3
Reference Drawing Lighting Installation Details Fluorescent Lighting Fixture Mounted on Steel Column Category 300 Sheet(s): 1 A3
IPS-D-EL-217 (0)
Nov. 1997
IPS-D-EL-305 (0)
Nov. 1997
Reference Drawing Power Installation Details Installation of Stanchion for Control Station Category 200 Sheet(s): 1 A3
Reference Drawing Lighting Installation Details Fluorescent Light Fixture Mounted on Concrete Beam Category 300 Sheet(s): 1 A3
53
Oct. 2007 Electrical
IPS-E-GN-000(4)
IPS-D-EL-306 (0)
Nov. 1997
IPS-D-EL-312 (0)
Nov. 1997 on
Reference Drawing Lighting Installation Details Fluorescent Light Fixture Mounted on Concrete Structure Category 300 Sheet(s): 1 A3
Reference Drawing Flood Lighting Fixture (Mounted Steel Structure) Category 300
Sheet(s):
1 A3
IPS-D-EL-307 (0)
Nov. 1997
IPS-D-EL-313 (0)
Nov. 1997 on
Reference Drawing Lighting Installation Details Fluorescent Light Fixture Mount Stand Type on Platform Category 300 Sheet(s): 1 A3
Reference Drawing Flood Lighting Fixture (Mounted Concrete Structure) Category 300
Sheet(s):
1 A3
IPS-D-EL-308 (0)
Nov. 1997
IPS-D-EL-314 (0)
Nov. 1997
Reference Drawing Lighting Installation Details Fluorescent Street Lighting Fixture Category 300 Sheet(s): 5 A3
Reference Drawing Flood Lighting Fixture (Mounted on Handrail) Category 300 Sheet(s): 1 A3
IPS-D-EL-309 (0)
Nov. 1997
IPS-D-EL-315 (0)
Nov. 1997
Reference Drawing Mercury Vapor Lighting Fixture (Mounted on Steel Beam) Category 300 Sheet(s): 1 A3
Reference Drawing Flood Lighting Fixture (Mounted on Steel Beam) Category 300 Sheet(s): 1 A3
IPS-D-EL-310 (0)
Nov. 1997
IPS-D-EL-316 (0)
Nov. 1997
Reference Drawing Mercury Vapor Lighting Fixture (Mounted on Concrete Beam) Category 300 Sheet(s): 1 A3
Reference Drawing Flood Lighting Fixture (Mounted on Pole) Category 300 Sheet(s): 1 A3
IPS-D-EL-311 (0)
Nov. 1997
IPS-D-EL-317 (0)
Nov. 1997
Reference Drawing Mercury Vapor Lighting Fixture (Bracket Type) Category 300 Sheet(s): 1 A3
Reference Drawing Air Craft warning light (Mounted on Stack) Category 300 Sheet(s): 2 A3
54
Oct. 2007 Electrical
IPS-E-GN-000(4)
IPS-D-EL-318 (0)
Nov. 1997
IPS-D-EL-402 (0)
Nov. 1997
Reference Drawing Garden Lighting Fixture Category 300 Sheet(s): 1 A3
Reference Drawing Grounding Installation Details Branch Wire Connection Category 400 Sheet(s): 1 A3
IPS-D-EL-319 (0)
Nov. 1997
IPS-D-EL-403 (0)
Nov. 1997
Reference Drawing Conduit Supports (Fixed on Ladder) Category 300 Sheet(s): 2 A3
Reference Drawing Grounding Installation Details Motor (Horizontal) Category 400 Sheet(s): 1 A3
IPS-D-EL-320 (0)
Nov. 1997
IPS-D-EL-404 (0)
Nov. 1997
Reference Drawing Junction Box Installation Category 300 Sheet(s): 2 A3
Reference Drawing Grounding Installation Details Motor (Vertical) Category 400 Sheet(s): 1 A3
IPS-D-EL-321 (0)
Nov. 1997
IPS-D-EL-407 (0)
Nov. 1997
Reference Drawing Flood Lighting (Mounted on Tower) Category 300 Sheet(s): 1 A3
Reference Drawing Grounding Installation Details Multiple Control Station Category 400 Sheet(s): 1 A3
IPS-D-EL-400 (0)
Nov. 1997
IPS-D-EL-408(0)
Nov. 1997
Reference Drawing Grounding Installation Details (Index, Sheet) Category 400 Sheet(s): 1 A3
Reference Drawing Grounding Installation Details Vertical Drum, Tower, Tank Category 400 Sheet(s): 1 A3
IPS-D-EL-401 (0)
Nov. 1997
IPS-D-EL-409(0)
Nov. 1997
Reference Drawing Grounding Installation Details (Grounding Rod) Category 400 Sheet(s): 1 A3
Reference Drawing Grounding Installation Details Gate, Fence Category 400 Sheet(s): 1 A3
55
Oct. 2007 Electrical
IPS-E-GN-000(4)
IPS-D-EL-410 (0)
Nov. 1997
IPS-D-EL-417 (0)
Nov. 1997
Reference Drawing Grounding Installation Details Pipe Rack Category 400 Sheet(s): 1 A3
Reference Drawing Grounding Installation Details Selection Chart Category 400 Sheet(s): 1 A3
IPS-D-EL-411 (0)
Nov. 1997
IPS-D-EL-800 (0)
Nov. 1997
Reference Drawing Grounding Installation Details Lighting Pole Category 400 Sheet(s): 1 A3
Reference Drawing Electric Heat Tracing Index Sheet Category 800 Sheet(s): 1 A3
IPS-D-EL-412 (0)
Nov. 1997
IPS-D-EL-801 (0)
Nov. 1997
Reference Drawing Grounding Installation Details Loading Facilities Category 400 Sheet(s): 1 A3
Reference Drawing Electric Heat Tracing Details Process Area Category 800 Sheet(s): 5 A3
IPS-D-EL-413 (0)
Nov. 1997
IPS-D-EL-802 (0)
Nov. 1997
Reference Drawing Grounding Installation Details Earthing Lug Category 400 Sheet(s): 1 A3
Reference Drawing Electric Tracing Typical View Category 800 Sheet(s): 1 A3
IPS-D-EL-414 (0)
Nov. 1997
IPS-D-EL-803 (0)
Nov. 1997 Wiring
Reference Drawing Grounding Installation Details Stub Up Conduit Pipe Category 400 Sheet(s): 1 A3
Reference Drawing Electric Heat Tracing Typical Category 800 Sheet(s): 1 A3
IPS-D-EL-415 (0)
Nov. 1997
Reference Drawing Grounding Installation Details Conduit Support Category 400 Sheet(s): 1 A3
56
Oct. 2007 Instrument
IPS-E-GN-000(4)
IPS-D-IN-010 (0)
Nov. 1997
IPS-D-IN-105 (0)
Nov. 1997
Instrument Standard Drawing Index List Sheet(s): 1 A4
Instrumentation Hook Up Details & Materials (Installation of Air Piping) Sheet(s): 9 A4
IPS-D-IN-100 (0)
Nov. 1997
IPS-D-IN-106 (0)Instrumentation Mounting) Sheet(s): Supports
Nov. 1997 & Materials (Installation &
Knife Edge Tube Skin Thermocouple Installation
Sheet(s):
2 A3
8 A4
IPS-D-IN-101 (0)
Nov. 1997
IPS-D-IN-107 (0)
Nov. 1997
Screwed Thermo well Detail Selection Chart for Thermocouples, RTD, BI Metallic T.M. T.W. Instrument Installation Sheet(s): 2 A3
Instrumentation Steam Tracing
Sheet(s): 9 A4
IPS-D-IN-102 (0)
Nov. 1997
IPS-D-IN-112 (0)Installation of Condensate Pot Sheet(s): Level
Nov. 1997 Instruments/Controller General
Piping Arrangement at Orifice Plate
Sheet(s):
5 A4
5 A3
IPS-D-IN-103 (0)Orifice Plate Fabrication Sheet(s): 7 A4
Nov. 1997
IPS-D-IN-115 (0)Condensate Pot Sheet(s): 1 A3
Nov. 1997
IPS-D-IN-104 (0)
Nov. 1997
IPS-D-IN-116 (0)
Nov. 1997
Instrumentation Installation of Pressure Piping Sheet(s): 42 A4
Instrumentation Standard Panels Sheet(s): 4 A4
57
Oct. 2007 Fixed Mechanical Equipment
IPS-E-GN-000(4)
IPS-D-ME-002 (0)
Nov. 1997
IPS-D-ME-031 (0)Baffle for Column and Drum Sheet(s): 1 A3
Nov. 1997
Lifting Lug to Lift Vessels Up to 60 Tons Sheet(s): 1 A4
IPS-D-ME-003 (0)
Nov. 1997
IPS-D-ME-040 (0)Column Davit Details Sheet(s): 1 A3
Nov. 1997
Lifting Lug to Lift Vessels Up to 200 Tons Sheet(s): 1 A3
IPS-D-ME-010 (0)
Nov. 1997
IPS-D-ME-041 (