606 Singapore: +65 6779 [email protected]: +1 330 486 [email protected] Germany: +49 621 [email protected]+Fuchs Groupwww.pepperl-fuchs.comSubject to modifications without notice Copyright Pepperl+Fuchs
Photoelectric Sensors
Phot
oele
ctric
MH
P Se
ries
Min
iatu
re
• Rugged IP69K housing withstands harsh environments and high-pressure washdown areas• Adjustable sensing range• DC model / AC model• Visible red light source / Infrared light source• Connector or cable connection
MH
P-D
R33
L
MH
P-D
33L
MH
P-D
2AL
MH
P-D
R33
Q
MH
P-D
33Q
MH
P-D
2AQ
Sensitivity adjustment ● ● ● ● ● ●Detection range 0 ... 150 mm adjustable ● ●
0 ... 450 mm adjustable ● ● ● ●Light source IRED ● ● ● ●
LED ● ●Light type modulated infrared light ● ● ● ●
modulated visible red light ● ●Function display LED red and LED green ● ● ● ● ● ●Controls rotary switch for light/dark, sensitivity adjuster ● ● ● ● ● ●Operating voltage 10 ... 30 V DC ● ● ● ●
20 - 260 V AC, 50 - 60 Hz ● ●No-load supply current 1.5 mA ● ●
35 mA ● ● ● ●Operating current 250 mA max. NPN ; 150 mA max. PNP ● ● ● ●
5 ... 500 mA, up to 50 °C, derated to 300 mA at 70 °C ● ●Product standard EN 60947-5-2:2007
IEC 60947-5-2:2007 ● ● ● ● ● ●
Signal output Thyristor ● ●1 NPN and 1 PNP ● ● ● ●
Voltage drop 1 V DC (NPN). 2 V DC (PNP). ● ● ● ● 6.7 V ● ●
Off-state current 10 A ● ● ● ●1.8 mA ● ●
Switching frequency 500 Hz ● ● ● ●60 Hz ● ●
Response time 1 ms ● ● ● ● 8 ms ● ●
Ambient temperature -30 ... 70 °C (-22 ... 158 °F) ● ● ● ● ● ●Protection degree IP69K ● ● ● ● ● ●Connection 2 m fixed cable , PVC ● ●
3 m fixed cable , PVC ●connector M12 x 1, 4-pin ● ●Micro AC connector, 1/2" ; 3-pin ●
Housing Polysulphone ● ● ● ● ● ●Optical face Polycarbonate ● ● ● ● ● ●Mass approx. 130 g ● ●
approx. 159 g ●approx. 43 g ● ● ●
UL approval cULus ● ● ● ● ● ●CCC approval Products with a maximum operating voltage of 36 V do not bear a
CCC marking because they do not require approval. ● ● ● ●
Photographs
Diagrams
Distance X [mm]
Offset Y [mm]
Characteristic response curve
-10-20-30-40
010203040
0 100 200 300 400 500X
Y Distance X [mm]
Stability controlRelative received light strength
X
0 150 300 450 600 7501
8
16
24
32
4044
• Rugged IP69K housing withstands harsh environments and high-pressure washdown areas• Adjustable sensing range• DC model / AC model• Visible red light source / Infrared light source• Connector or cable connection
MH
P-D
R33
L
MH
P-D
33L
MH
P-D
2AL
MH
P-D
R33
Q
MH
P-D
33Q
MH
P-D
2AQ
Sensitivity adjustment ● ● ● ● ● ●Detection range 0 ... 150 mm adjustable ● ●
0 ... 450 mm adjustable ● ● ● ●Light source IRED ● ● ● ●
LED ● ●Light type modulated infrared light ● ● ● ●
modulated visible red light ● ●Function display LED red and LED green ● ● ● ● ● ●Controls rotary switch for light/dark, sensitivity adjuster ● ● ● ● ● ●Operating voltage 10 ... 30 V DC ● ● ● ●
20 - 260 V AC, 50 - 60 Hz ● ●No-load supply current 1.5 mA ● ●
35 mA ● ● ● ●Operating current 250 mA max. NPN ; 150 mA max. PNP ● ● ● ●
5 ... 500 mA, up to 50 °C, derated to 300 mA at 70 °C ● ●Product standard EN 60947-5-2:2007
IEC 60947-5-2:2007 ● ● ● ● ● ●
Signal output Thyristor ● ●1 NPN and 1 PNP ● ● ● ●
Voltage drop 1 V DC (NPN). 2 V DC (PNP). ● ● ● ● 6.7 V ● ●
Off-state current 10 A ● ● ● ●1.8 mA ● ●
Switching frequency 500 Hz ● ● ● ●60 Hz ● ●
Response time 1 ms ● ● ● ● 8 ms ● ●
Ambient temperature -30 ... 70 °C (-22 ... 158 °F) ● ● ● ● ● ●Protection degree IP69K ● ● ● ● ● ●Connection 2 m fixed cable , PVC ● ●
3 m fixed cable , PVC ●connector M12 x 1, 4-pin ● ●Micro AC connector, 1/2" ; 3-pin ●
Housing Polysulphone ● ● ● ● ● ●Optical face Polycarbonate ● ● ● ● ● ●Mass approx. 130 g ● ●
approx. 159 g ●approx. 43 g ● ● ●
UL approval cULus ● ● ● ● ● ●CCC approval Products with a maximum operating voltage of 36 V do not bear a
CCC marking because they do not require approval. ● ● ● ●
Photographs
Diagrams
Distance X [mm]
Offset Y [mm]
Characteristic response curve
-10-20-30-40
010203040
0 100 200 300 400 500X
Y Distance X [mm]
Stability controlRelative received light strength
X
0 150 300 450 600 7501
8
16
24
32
4044
• Rugged IP69K housing withstands harsh environments and high-pressure washdown areas• Adjustable sensing range• DC model / AC model• Visible red light source / Infrared light source• Connector or cable connection
MH
P-D
R33
L
MH
P-D
33L
MH
P-D
2AL
MH
P-D
R33
Q
MH
P-D
33Q
MH
P-D
2AQ
Sensitivity adjustment ● ● ● ● ● ●Detection range 0 ... 150 mm adjustable ● ●
0 ... 450 mm adjustable ● ● ● ●Light source IRED ● ● ● ●
LED ● ●Light type modulated infrared light ● ● ● ●
modulated visible red light ● ●Function display LED red and LED green ● ● ● ● ● ●Controls rotary switch for light/dark, sensitivity adjuster ● ● ● ● ● ●Operating voltage 10 ... 30 V DC ● ● ● ●
20 - 260 V AC, 50 - 60 Hz ● ●No-load supply current 1.5 mA ● ●
35 mA ● ● ● ●Operating current 250 mA max. NPN ; 150 mA max. PNP ● ● ● ●
5 ... 500 mA, up to 50 °C, derated to 300 mA at 70 °C ● ●Product standard EN 60947-5-2:2007
IEC 60947-5-2:2007 ● ● ● ● ● ●
Signal output Thyristor ● ●1 NPN and 1 PNP ● ● ● ●
Voltage drop 1 V DC (NPN). 2 V DC (PNP). ● ● ● ● 6.7 V ● ●
Off-state current 10 A ● ● ● ●1.8 mA ● ●
Switching frequency 500 Hz ● ● ● ●60 Hz ● ●
Response time 1 ms ● ● ● ● 8 ms ● ●
Ambient temperature -30 ... 70 °C (-22 ... 158 °F) ● ● ● ● ● ●Protection degree IP69K ● ● ● ● ● ●Connection 2 m fixed cable , PVC ● ●
3 m fixed cable , PVC ●connector M12 x 1, 4-pin ● ●Micro AC connector, 1/2" ; 3-pin ●
Housing Polysulphone ● ● ● ● ● ●Optical face Polycarbonate ● ● ● ● ● ●Mass approx. 130 g ● ●
approx. 159 g ●approx. 43 g ● ● ●
UL approval cULus ● ● ● ● ● ●CCC approval Products with a maximum operating voltage of 36 V do not bear a
CCC marking because they do not require approval. ● ● ● ●
Photographs
Diagrams
Distance X [mm]
Offset Y [mm]
Characteristic response curve
-10-20-30-40
010203040
0 100 200 300 400 500X
Y Distance X [mm]
Stability controlRelative received light strength
X
0 150 300 450 600 7501
8
16
24
32
4044
MHP Series Miniature Sensors
• Rugged IP69K housing withstands harsh environments and high-pressure washdown areas
• Adjustable sensing range• DC model / AC model• Visible red light source / Infrared light
source• Connector or cable connection
Technical Specifications
Diffuse Mode
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
607Singapore: +65 6779 [email protected]: +1 330 486 [email protected] Germany: +49 621 [email protected]+Fuchs Groupwww.pepperl-fuchs.comSubject to modifications without notice Copyright Pepperl+Fuchs
Photoelectric Sensors
Photoelectric MH
P Series Miniature
Wiring Diagrams
DC DCAC AC
Note: Wiring diagrams show quick disconnect pin numbers.
Quick DisconnectCable Connection
• Rugged IP69K housing withstands harsh environments and high-pressure washdown areas• Adjustable sensing range• DC model / AC model• Visible red light source / Infrared light source• Connector or cable connection
MH
P-D
R33
L
MH
P-D
33L
MH
P-D
2AL
MH
P-D
R33
Q
MH
P-D
33Q
MH
P-D
2AQ
Sensitivity adjustment ● ● ● ● ● ●Detection range 0 ... 150 mm adjustable ● ●
0 ... 450 mm adjustable ● ● ● ●Light source IRED ● ● ● ●
LED ● ●Light type modulated infrared light ● ● ● ●
modulated visible red light ● ●Function display LED red and LED green ● ● ● ● ● ●Controls rotary switch for light/dark, sensitivity adjuster ● ● ● ● ● ●Operating voltage 10 ... 30 V DC ● ● ● ●
20 - 260 V AC, 50 - 60 Hz ● ●No-load supply current 1.5 mA ● ●
35 mA ● ● ● ●Operating current 250 mA max. NPN ; 150 mA max. PNP ● ● ● ●
5 ... 500 mA, up to 50 °C, derated to 300 mA at 70 °C ● ●Product standard EN 60947-5-2:2007
IEC 60947-5-2:2007 ● ● ● ● ● ●
Signal output Thyristor ● ●1 NPN and 1 PNP ● ● ● ●
Voltage drop 1 V DC (NPN). 2 V DC (PNP). ● ● ● ● 6.7 V ● ●
Off-state current 10 A ● ● ● ●1.8 mA ● ●
Switching frequency 500 Hz ● ● ● ●60 Hz ● ●
Response time 1 ms ● ● ● ● 8 ms ● ●
Ambient temperature -30 ... 70 °C (-22 ... 158 °F) ● ● ● ● ● ●Protection degree IP69K ● ● ● ● ● ●Connection 2 m fixed cable , PVC ● ●
3 m fixed cable , PVC ●connector M12 x 1, 4-pin ● ●Micro AC connector, 1/2" ; 3-pin ●
Housing Polysulphone ● ● ● ● ● ●Optical face Polycarbonate ● ● ● ● ● ●Mass approx. 130 g ● ●
approx. 159 g ●approx. 43 g ● ● ●
UL approval cULus ● ● ● ● ● ●CCC approval Products with a maximum operating voltage of 36 V do not bear a
CCC marking because they do not require approval. ● ● ● ●
Photographs
Diagrams
Distance X [mm]
Offset Y [mm]
Characteristic response curve
-10-20-30-40
010203040
0 100 200 300 400 500X
Y Distance X [mm]
Stability controlRelative received light strength
X
0 150 300 450 600 7501
8
16
24
32
4044
Dimensions Drawings
Electrical Connection
Light on/dark on (if applicable)Sensitivity adjustment (if applicable)
LEDs (if applicable)Red: output statusGreen: signal strengthAmber: Power (transmitter only)
64.8
45.7
49.515.315.8
1-20 UNEF-2A
30
19.1
Ø 3
24.4
Light on/dark on (if applicable)Sensitivity adjustment (if applicable)
LEDs (if applicable)Red: output statusGreen: signal strengthAmber: Power (transmitter only)
15.8
30
1-20 UNEF-2A
Ø 3
DC: M12 x 1AC: 1/2" - 20
64.8
45.7
49.5 6.415.3
19.1
24.4
MHP-DR33LMHP-D2ALMHP-D33L
MHP-DR33QMHP-D2AQMHP-D33Q
2
1
3
4
+UB
Q
0 V
Q
3
1
2
n. c.
L2
L1
WH
BN
BU
BK
+UB
Q
0 V
Q
BU
BN L1
L2
MHP-DR33QMHP-D33Q
MHP-D2AQMHP-DR33LMHP-D33L
MHP-D2AL
1
2 3
1
3
42
Dimensions Drawings
Electrical Connection
Light on/dark on (if applicable)Sensitivity adjustment (if applicable)
LEDs (if applicable)Red: output statusGreen: signal strengthAmber: Power (transmitter only)
64.8
45.7
49.515.315.8
1-20 UNEF-2A
30
19.1
Ø 3
24.4
Light on/dark on (if applicable)Sensitivity adjustment (if applicable)
LEDs (if applicable)Red: output statusGreen: signal strengthAmber: Power (transmitter only)
15.8
30
1-20 UNEF-2A
Ø 3
DC: M12 x 1AC: 1/2" - 20
64.8
45.7
49.5 6.415.3
19.1
24.4
MHP-DR33LMHP-D2ALMHP-D33L
MHP-DR33QMHP-D2AQMHP-D33Q
2
1
3
4
+UB
Q
0 V
Q
3
1
2
n. c.
L2
L1
WH
BN
BU
BK
+UB
Q
0 V
Q
BU
BN L1
L2
MHP-DR33QMHP-D33Q
MHP-D2AQMHP-DR33LMHP-D33L
MHP-D2AL
1
2 3
1
3
42
Sensing Characteristics
Dimensions (mm)
Dimensions Drawings
Electrical Connection
Light on/dark on (if applicable)Sensitivity adjustment (if applicable)
LEDs (if applicable)Red: output statusGreen: signal strengthAmber: Power (transmitter only)
64.8
45.7
49.515.315.8
1-20 UNEF-2A
30
19.1
Ø 3
24.4
Light on/dark on (if applicable)Sensitivity adjustment (if applicable)
LEDs (if applicable)Red: output statusGreen: signal strengthAmber: Power (transmitter only)
15.8
301-20 UNEF-2A
Ø 3
DC: M12 x 1AC: 1/2" - 20
64.8
45.7
49.5 6.415.3
19.1
24.4
MHP-DR33LMHP-D2ALMHP-D33L
MHP-DR33QMHP-D2AQMHP-D33Q
2
1
3
4
+UB
Q
0 V
Q
3
1
2
n. c.
L2
L1
WH
BN
BU
BK
+UB
Q
0 V
Q
BU
BN L1
L2
MHP-DR33QMHP-D33Q
MHP-D2AQMHP-DR33LMHP-D33L
MHP-D2AL
1
2 3
1
3
42
Dimensions Drawings
Electrical Connection
Light on/dark on (if applicable)Sensitivity adjustment (if applicable)
LEDs (if applicable)Red: output statusGreen: signal strengthAmber: Power (transmitter only)
64.8
45.7
49.515.315.8
1-20 UNEF-2A
30
19.1
Ø 3
24.4
Light on/dark on (if applicable)Sensitivity adjustment (if applicable)
LEDs (if applicable)Red: output statusGreen: signal strengthAmber: Power (transmitter only)
15.8
30
1-20 UNEF-2A
Ø 3
DC: M12 x 1AC: 1/2" - 20
64.8
45.7
49.5 6.415.3
19.1
24.4
MHP-DR33LMHP-D2ALMHP-D33L
MHP-DR33QMHP-D2AQMHP-D33Q
2
1
3
4
+UB
Q
0 V
Q
3
1
2
n. c.
L2
L1
WH
BN
BU
BK
+UB
Q
0 V
Q
BU
BN L1
L2
MHP-DR33QMHP-D33Q
MHP-D2AQMHP-DR33LMHP-D33L
MHP-D2AL
1
2 3
1
3
42
Dimensions Drawings
Electrical Connection
Light on/dark on (if applicable)Sensitivity adjustment (if applicable)
LEDs (if applicable)Red: output statusGreen: signal strengthAmber: Power (transmitter only)
64.8
45.7
49.515.315.8
1-20 UNEF-2A
30
19.1
Ø 3
24.4
Light on/dark on (if applicable)Sensitivity adjustment (if applicable)
LEDs (if applicable)Red: output statusGreen: signal strengthAmber: Power (transmitter only)
15.8
30
1-20 UNEF-2A
Ø 3
DC: M12 x 1AC: 1/2" - 20
64.8
45.7
49.5 6.415.3
19.1
24.4
MHP-DR33LMHP-D2ALMHP-D33L
MHP-DR33QMHP-D2AQMHP-D33Q
2
1
3
4
+UB
Q
0 V
Q
3
1
2
n. c.
L2
L1
WH
BN
BU
BK
+UB
Q
0 V
Q
BU
BN L1
L2
MHP-DR33QMHP-D33Q
MHP-D2AQMHP-DR33LMHP-D33L
MHP-D2AL
1
2 3
1
3
42
Dimensions Drawings
Electrical Connection
Light on/dark on (if applicable)Sensitivity adjustment (if applicable)
LEDs (if applicable)Red: output statusGreen: signal strengthAmber: Power (transmitter only)
64.8
45.7
49.515.315.8
1-20 UNEF-2A
30
19.1
Ø 3
24.4
Light on/dark on (if applicable)Sensitivity adjustment (if applicable)
LEDs (if applicable)Red: output statusGreen: signal strengthAmber: Power (transmitter only)
15.8
30
1-20 UNEF-2A
Ø 3
DC: M12 x 1AC: 1/2" - 20
64.8
45.7
49.5 6.415.3
19.1
24.4
MHP-DR33LMHP-D2ALMHP-D33L
MHP-DR33QMHP-D2AQMHP-D33Q
2
1
3
4
+UB
Q
0 V
Q
3
1
2
n. c.
L2
L1
WH
BN
BU
BK
+UB
Q
0 V
Q
BU
BN L1
L2
MHP-DR33QMHP-D33Q
MHP-D2AQMHP-DR33LMHP-D33L
MHP-D2AL
1
2 3
1
3
42
V1 Type V12 Type
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
610 Singapore: +65 6779 [email protected]: +1 330 486 [email protected] Germany: +49 621 [email protected]+Fuchs Groupwww.pepperl-fuchs.comSubject to modifications without notice Copyright Pepperl+Fuchs
Photoelectric Sensors
Phot
oele
ctric
MH
P Se
ries
Min
iatu
re
(Dimensions in mm)
See pages 1009-1076for cordsets
See pages 895-912 for reflectors
See pages 1105-1128 for accessories
Accessories
Panel Mount Bracket Model MHPTB
25.4
38.125.4
44.5 R
12.7
20°
20°
20°
20°
25.4
12.7
Mounting Kit Model MHPHDW
(included with all non-fiber MHP Series sensors)
Kit includes (1) locknut, (1) O-ring, (2) 1.25” length screws, (2) nuts,
and (2) washers.
Side Mount Bracket Model MHPSB
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com