Schut.com 906.050 906.062 906.874 45 0 5 27.75 5 ø 2 5 ø 2 45 0 5 906.875-881 906.875-881 906.874 94.00 Sold out 104.00 109.00 114.00 Sold out 129.00 Soldou t Sold out 147.00 149.00 158.00 Sold out 45.00 49.00 53.00 57.00 61.00 65.00 70.00 174.00 Sold out Sold out Schut for Precision SALE Measuring range/mm 0 - 25 25 - 50 50 - 75 75 - 100 100 - 125 125 - 150 150 - 175 175 - 200 200 - 225 225 - 250 250 - 275 275 - 300 Measuring range/mm 0 - 25 25 - 50 50 - 75 75 - 100 100 - 125 125 - 150 150 - 175 175 - 200 Measuring range/mm 0 - 75 0 - 100 0 - 150 Spare battery Spare battery Accuracy mm ± 0.005 ± 0.006 ± 0.007 ± 0.008 ± 0.009 ± 0.009 ± 0.010 ± 0.010 ± 0.011 ± 0.011 ± 0.012 ± 0.012 Accuracy mm ± 0.004 ± 0.004 ± 0.005 ± 0.005 ± 0.006 ± 0.006 ± 0.007 ± 0.007 Pieces 3 4 6 Digital internal micrometers Internal micrometers with special measuring jaws for measurements in hard-to-reach places. Digital micrometers IP54 with double measuring force Rugged digital micrometers with an IP54 protection degree (resistant to dust and splash water) and a favourable price-performance ratio. These micrometers have a very intuitive operation because every function has its own button. Furthermore these micrometers are equipped with a double measuring force. The small thimble produces a measuring force of approximately 5 N and the large thimble produces a measuring force of approximately 10 N. ■ Measuring range: 5 - 200 mm. ■ Resolution: 0.001 mm. ■ Tungsten carbide cylindrical measuring faces. ■ Internal micrometers within measuring range 5 - 50 mm are delivered incl. setting ring. ■ Delivery in a case. ■ mm/inch conversion. ■ ABS/INC switchable. ■ Automatic switch-off. ■ Reset/preset. ■ Power supply: 1 battery type V357. ■ Measuring range: 0 - 200 mm. ■ Resolution: 0.001 mm. ■ mm/inch conversion. ■ ABS/INC switchable. ■ LCD display with function indication. ■ Automatic switch-off. ■ Reset/preset. ■ Tungsten carbide measuring faces: ø 6.5 mm. ■ Protection: IP54. ■ DIN 863 T1. ■ From measuring range 25 - 50 mm including setting gauge. ■ Power supply: 1 battery type V357. Item no. Option: Item no. Option: Item no. Sets: Price EUR Price EUR Price EUR Phasing out Filetta digital micrometers While stocks last Revision date: September 2020 906.874 906.875 906.876 906.877 906.878 906.879 906.880 906.881 906.882 906.883 906.884 906.885 836.535 906.050 906.051 906.052 906.053 906.552 906.553 906.554 906.555 836.535 906.062 906.063 906.064
Transcript
Schut.com
906.050
906.062
906.874
27.75 R12 12.25 5
4505
27.75 5 ø 2
5
ø 2
4505
906.875-881906.875-881906.874
94.00
Sold out
104.00
109.00
114.00
Sold out
129.00
Sold ou t
Sold out
147.00
149.00
158.00
Sold out
45.00
49.00
53.00
57.00
61.00
65.00
70.00174.00
Sold out
Sold out
Schut for Precision
SALE
Measuring range/mm
0 - 25
25 - 50
50 - 75
75 - 100
100 - 125
125 - 150
150 - 175
175 - 200
200 - 225
225 - 250
250 - 275
275 - 300
Measuring range/mm
0 - 25
25 - 50
50 - 75
75 - 100
100 - 125
125 - 150
150 - 175
175 - 200
Measuring range/mm
0 - 75
0 - 100
0 - 150
Spare battery
Spare battery
Accuracy mm
± 0.005
± 0.006
± 0.007
± 0.008
± 0.009
± 0.009
± 0.010
± 0.010
± 0.011
± 0.011
± 0.012
± 0.012
Accuracy mm
± 0.004
± 0.004
± 0.005
± 0.005
± 0.006
± 0.006
± 0.007
± 0.007
Pieces
3
4
6
Digital internal micrometersInternal micrometers with special measuring jaws for measurements in hard-to-reach places.
Digital micrometers IP54 with double measuring forceRugged digital micrometers with an IP54 protection degree (resistant to dust and splash water) and a favourable price-performance
ratio. These micrometers have a very intuitive operation because every function has its own button. Furthermore these micrometers are equipped with a double measuring force. The small thimble produces a measuring force of approximately 5 N and the large thimble produces a measuring force of approximately 10 N.
■ Measuring range: 5 - 200 mm. ■ Resolution: 0.001 mm. ■ Tungsten carbide cylindrical measuring faces. ■ Internal micrometers within measuring range 5 - 50 mm are delivered incl. setting ring.
■ Delivery in a case. ■ mm/inch conversion.
■ ABS/INC switchable. ■ Automatic switch-off. ■ Reset/preset. ■ Power supply: 1 battery type V357.
■ Measuring range: 0 - 200 mm. ■ Resolution: 0.001 mm. ■ mm/inch conversion. ■ ABS/INC switchable. ■ LCD display with function indication. ■ Automatic switch-off.
■ Reset/preset. ■ Tungsten carbide measuring faces: ø 6.5 mm. ■ Protection: IP54. ■ DIN 863 T1. ■ From measuring range 25 - 50 mm including setting gauge. ■ Power supply: 1 battery type V357.
Item no.
Option:
Item no.
Option:
Item no.
Sets:
Price EUR
Price EUR
Price EUR
Phasing out Filetta digital micrometersWhile stocks last
Digital micrometers IP54 with double measuring forceRugged digital micrometers with an IP54 protection degree (resistant to dust and splash water) and
a favourable price-performance ratio. These micrometers have a very intuitive operation because every function has its own button. Furthermore these micrometers are equipped with a double measuring force. The small thimble produces a measuring force of approximately 5 N and the large thimble produces a measuring force of approximately 10 N.
Measuring range: 0 - 200 mm. Resolution: 0.001 mm. mm/inch conversion. ABS/INC switchable. LCD display with function indication. Automatic switch-off. Reset/preset.
Tungsten carbide measuring faces: ø 6.5 mm. Protection: IP54. DIN 863 T1. From measuring range 25 - 50 mm including
Digital micrometers IP54 with double measuring forceRugged digital micrometers with an IP54 protection degree (resistant to dust and splash water) and
a favourable price-performance ratio. These micrometers have a very intuitive operation because every function has its own button. Furthermore these micrometers are equipped with a double measuring force. The small thimble produces a measuring force of approximately 5 N and the large thimble produces a measuring force of approximately 10 N.
Measuring range: 0 - 200 mm. Resolution: 0.001 mm. mm/inch conversion. ABS/INC switchable. LCD display with function indication. Automatic switch-off. Reset/preset.
Tungsten carbide measuring faces: ø 6.5 mm. Protection: IP54. DIN 863 T1. From measuring range 25 - 50 mm including
Digital micrometers IP54 with double measuring forceRugged digital micrometers with an IP54 protection degree (resistant to dust and splash water) and
a favourable price-performance ratio. These micrometers have a very intuitive operation because every function has its own button. Furthermore these micrometers are equipped with a double measuring force. The small thimble produces a measuring force of approximately 5 N and the large thimble produces a measuring force of approximately 10 N.
Measuring range: 0 - 200 mm. Resolution: 0.001 mm. mm/inch conversion. ABS/INC switchable. LCD display with function indication. Automatic switch-off. Reset/preset.
Tungsten carbide measuring faces: ø 6.5 mm. Protection: IP54. DIN 863 T1. From measuring range 25 - 50 mm including
setting gauge. Power supply: 1 battery type V357.
Schut Geometrical Metrology MICROMETERS
91
Schut.com
906.050
906.062
906.874
90.00
95.00
100.00
105.00
110.00
Sold out
125.00
Sold out
69.00
76.00
75.00
84.00
88.00
95.00
103.00
108.00211.00
295.00
481.00
Schut for Precision
SALE
Measuring range/mm
0 - 25
25 - 50
50 - 75
75 - 100
100 - 125
125 - 150
150 - 175
175 - 200
Measuring range/mm
0 - 25
25 - 50
50 - 75
75 - 100
100 - 125
125 - 150
150 - 175
175 - 200
Measuring range/mm
0 - 75
0 - 100
0 - 150
Spare battery
Spare battery
Accuracy mm
± 0.005
± 0.006
± 0.007
± 0.008
± 0.009
± 0.009
± 0.010
± 0.010
Accuracy mm
± 0.004
± 0.004
± 0.005
± 0.005
± 0.006
± 0.006
± 0.007
± 0.007
Pieces
3
4
6
Digital internal micrometers
Digital micrometers IP54 with double measuring force
■ Measuring range: 5 - 200 mm. ■ Resolution: 0.001 mm. ■ Tungsten carbide cylindrical measuring faces. ■ Internal micrometers within measuring range 5 - 50 mm are delivered incl. setting ring.
■ Delivery in a case.
■ Measuring range: 0 - 200 mm. ■ Resolution: 0.001 mm. ■ mm/inch conversion. ■ ABS/INC switchable. ■ LCD display with function indication. ■ Automatic switch-off. ■ Reset/preset.
■ mm/inch conversion. ■ ABS/INC switchable. ■ Automatic switch-off. ■ Reset/preset. ■ Power supply: 1 battery type V357.
■ Tungsten carbide measuring faces: ø 6.5 mm. ■ Protection: IP54. ■ DIN 863 T1. ■ From measuring range 25 - 50 mm including setting gauge. ■ Power supply: 1 battery type V357.
Item no.
Option:
Item no.
Option:
Item no.
Sets:
Price EUR
Price EUR
Price EUR
Internal micrometers with special measuring jaws for measurements in hard-to-reach places.
Rugged digital micrometers with an IP54 protection degree (resistant to dust and splash water) and a favourable price-performance ratio. These micrometers have a very intuitive operation because every function has its own button. Furthermore these micrometers are equipped with a double measuring force. The small thimble produces a measuring force of approximately 5 N and the large thimble produces a measuring force of approximately 10 N.
Digital micrometers IP54 with double measuring forceRugged digital micrometers with an IP54 protection degree (resistant to dust and splash water) and
a favourable price-performance ratio. These micrometers have a very intuitive operation because every function has its own button. Furthermore these micrometers are equipped with a double measuring force. The small thimble produces a measuring force of approximately 5 N and the large thimble produces a measuring force of approximately 10 N.
Measuring range: 0 - 200 mm. Resolution: 0.001 mm. mm/inch conversion. ABS/INC switchable. LCD display with function indication. Automatic switch-off. Reset/preset.
Tungsten carbide measuring faces: ø 6.5 mm. Protection: IP54. DIN 863 T1. From measuring range 25 - 50 mm including
setting gauge. Power supply: 1 battery type V357.
Schut Geometrical Metrology MICROMETERS
91
Phasing out Filetta digital micrometersWhile stocks last Revision date: 1 July 2016
Internal micrometersInternal micrometers with special measuring jaws for measurements in hard-to-reach places.
Measuring range: 5 - 200 mm. Analog: graduation 0.01 mm,
digital: resolution 0.001 mm. Tungsten carbide cylindrical measuring faces. Internal micrometers within measuring range
5 - 50 mm are delivered incl. setting ring. Delivery in a case.
Analog No-glare chrome finished design.
Digital mm/inch conversion. ABS/INC switchable. Automatic switch-off. Reset/preset. Power supply: 1 battery type V357.
Schut Geometrical Metrology INTERNAL MICROMETERS
175
Schut.com
906.982
906.538
L1L2 (max)
L2 (max) L1
55.00
60.00
88.00
Sold out
104.00
Sold out
124.00
149.00
Sold out
Sold out
104.00
114.00
124.00
149.00
Schut for Precision
Measuring range/mm
0 - 25
0 - 25
Spare battery
spindle
ø 6.5
ø 8
Dimensions/mm clamping
ø 12 x 17.5
ø 12 x 20.5
L2
48
48
L1
109
109
Digital micrometer headsSeveral digital micrometer heads with different possibilities.
■ Measuring range: 0 - 25 mm. ■ Resolution: 0.001 mm. ■ Accuracy: ± 0.003 mm. ■ mm/inch conversion. ■ ABS/INC switchable. ■ On/off switch.
■ Automatic switch-off. ■ Memory absolute measuring value. ■ Preset for ABS measurement. ■ Friction thimble. ■ Tungsten carbide measuring face. ■ Power supply: 1 battery type V357.
Item no.
Option:
Price EUR
Measuring range/mm
0 - 25
0 - 50
0 - 100
0 - 150
0 - 200
0 - 300
0 - 25
0 - 50
0 - 100
0 - 150
0 - 200
0 - 300
Spare battery
Accuracymm
± 0.004
± 0.004
± 0.005
± 0.005
± 0.006
± 0.007
± 0.004
± 0.004
± 0.005
± 0.005
± 0.006
± 0.007
Number of rods
1
2
4
6
8
12
1
2
4
6
8
12
Digital depth micrometersDigital depth micrometers with interchangeable, spherical rods, because of which beveled and hollow surfaces can be measured very
accurately. The high accuracy of the rods makes resetting after exchanging the rods unnecessary. Two models with different base lengths available.
■ Measuring range: 0 - 300 mm. ■ Resolution: 0.001 mm. ■ mm/inch conversion. ■ ABS/INC switchable. ■ Preset. ■ Measuring rods: ø 4.5 mm. ■ Locking screw. ■ DIN 863 T2. ■ Power supply: 1 battery type V357.
Item no.
Base 63 mm:
Base 101.5 mm:
Option:
Price EUR
906.538
906.539
836.535
906.982
906.983
906.984
906.985
906.986
906.987
906.988
906.989
906.990
906.991
906.992
906.993
836.535
Schut.com
906.120
907.038
906.192
ø 6.5 mmø 2 mm
5 mm
Sold out
Sold out
87.00
94.00
Sold out
109.00
91.00
99.00
106.00
Sold out
121.00
126.00
Sold out
Schut for Precision
Measuring range/mm
0 - 25
25 - 50
50 - 75
75 - 100
Measuring range/mm
0 - 25
25 - 50
Spare battery
Spare battery
Accuracy mm
± 0.004
± 0.004
± 0.005
± 0.005
Digital micrometers with spherical anvilMicrometers for measuring bent surfaces and wall thicknesses of tubes, bearings, rings, etc.
Digital universal micrometers with interchangeable anvilsWith these micrometers you are an all-rounder. The instruments have two interchangeable anvils, which gives them a lot of application
possibilities. They can also be used as a height gauge, when the clamp for clamping the anvils is removed.
Micrometers for measuring bent surfaces and wall thicknesses of tubes, bearings, rings, etc.
With these micrometers you are an all-rounder. The instruments have two interchangeable anvils, which gives them a lot of application possibilities. They can also be used as a height gauge, when the clamp for clamping the anvils is removed.
Measuring range/mm
0 - 25
25 - 50
50 - 75
75 - 100
100 - 125
125 - 150
150 - 175
Spare battery
Accuracy mm
± 0.004
± 0.004
± 0.005
± 0.005
± 0.006
± 0.006
± 0.007
Digital micrometers with small measuring faces
■ Measuring range: 0 - 175 mm. ■ Resolution: 0.001 mm. ■ Measuring pins: ø 2 x 5 mm. ■ mm/inch conversion. ■ ABS/INC switchable.
■ Reset/preset. ■ Hold function. ■ Preservation of the min/max value. ■ Protection: IP54. ■ Power supply: 1 battery type V357.
Item no.
Option:
Price EUR
For measuring hard-to-reach measuring points such as grooves.
Micrometers with small measuring facesFor measuring hard-to-reach measuring points such as grooves.
Measuring range: 0 - 175 mm. Analog: graduation 0.01 mm,
digital: resolution 0.001 mm. Measuring pins: ø 2 x 5 mm.
Digital mm/inch conversion. ABS/INC switchable. Reset/preset. Hold function. Preservation of the min/max value. Protection: IP54. Power supply: 1 battery type V357.
Micrometers with small measuring facesFor measuring hard-to-reach measuring points such as grooves.
Measuring range: 0 - 175 mm. Analog: graduation 0.01 mm,
digital: resolution 0.001 mm. Measuring pins: ø 2 x 5 mm.
Digital mm/inch conversion. ABS/INC switchable. Reset/preset. Hold function. Preservation of the min/max value. Protection: IP54. Power supply: 1 battery type V357.
Micrometers with small measuring facesFor measuring hard-to-reach measuring points such as grooves.
Measuring range: 0 - 175 mm. Analog: graduation 0.01 mm,
digital: resolution 0.001 mm. Measuring pins: ø 2 x 5 mm.
Digital mm/inch conversion. ABS/INC switchable. Reset/preset. Hold function. Preservation of the min/max value. Protection: IP54. Power supply: 1 battery type V357.
Universal micrometers with interchangeable anvilsWith these micrometers you are an all-rounder. The instruments have two interchangeable anvils,
which gives them a lot of application possibilities. They can also be used as a height gauge, when the clamp for clamping the anvils is removed.
Measuring range: 0 - 50 mm. Analog: graduation 0.01 mm,
digital: resolution 0.001 mm. Accuracy: ± 0.004 mm. Tungsten carbide measuring face: ø 6.5 mm. Delivery incl. 2 tungsten carbide anvils.
Digital ABS/INC switchable. On/off switch. Reset/preset. Adjustable tolerance limits (only 906.192). Protection: IP54. Power supply: 1 battery type V357.
MICROMETERSSchut Geometrical Metrology
115
Schut.com
906.127
906.700
Sold out
114.00
Sold out
131.00
Sold out
78.00
86.00
95.00
Sold out
164.00
181.00
199.00
Schut for Precision
Measuring range/mm
0 - 25
25 - 50
50 - 75
75 - 100
Measuring range/mm
0 - 25
25 - 50
50 - 75
75 - 100
100 - 125
125 - 150
150 - 175
175 - 200
Spare battery
Spare batteryFor inserts and setting standards please refer to our general catalog Measuring Instruments and Systems.
Accuracy mm
± 0.004
± 0.004
± 0.005
± 0.005
Accuracy mm
± 0.004
± 0.004
± 0.005
± 0.005
± 0.006
± 0.006
± 0.007
± 0.007
Digital micrometers with lamellar measuring facesFor measuring grooves, keyseats and other hard-to-reach places.
Digital screw thread micrometers ■ Measuring range: 0 - 200 mm. ■ Resolution: 0.001 mm. ■ Insert shaft: ø 5 mm. ■ DIN 863 T3. ■ Delivery incl. adjustment tools. ■ From measuring range 25 - 50 mm including setting gauge 60°.
■ Measuring range: 0 - 100 mm. ■ Resolution: 0.001 mm. ■ Non-rotating spindle. ■ Blade width: 0.75 mm, blade length: 6 mm. ■ mm/inch conversion.
■ ABS/INC switchable. ■ Reset/preset. ■ Hold function. ■ Min/max function. ■ Power supply: 1 battery type V357.
906.127
906.128
906.129
906.130
836.535
906.700
906.701
906.702
906.703
906.704
906.705
906.706
906.707
836.535
Schut.com
906.127
906.700
103.00
102.00
117.00
127.00
68.00
75.00
83.00
92.00
144.00
159.00
175.00
193.00
Schut for Precision
Measuring range/mm
0 - 25
25 - 50
50 - 75
75 - 100
Measuring range/mm
0 - 25
25 - 50
50 - 75
75 - 100
100 - 125
125 - 150
150 - 175
175 - 200
Spare battery
Spare batteryFor inserts and setting standards please refer to our general catalog Measuring Instruments and Systems.
Accuracy mm
± 0.004
± 0.004
± 0.005
± 0.005
Accuracy mm
± 0.004
± 0.004
± 0.005
± 0.005
± 0.006
± 0.006
± 0.007
± 0.007
Digital micrometers with lamellar measuring faces
Digital screw thread micrometers
■ Measuring range: 0 - 100 mm. ■ Resolution: 0.001 mm. ■ Non-rotating spindle. ■ Blade width: 0.75 mm, blade length: 6 mm. ■ mm/inch conversion.
■ Measuring range: 0 - 200 mm. ■ Resolution: 0.001 mm. ■ Insert shaft: ø 5 mm. ■ DIN 863 T3. ■ Delivery incl. adjustment tools. ■ From measuring range 25 - 50 mm including setting gauge 60°.
■ ABS/INC switchable. ■ Reset/preset. ■ Hold function. ■ Min/max function. ■ Power supply: 1 battery type V357.
Digital mm/inch conversion. ABS/INC switchable. On/off switch. Reset/preset. Power supply: 1 battery type V357.
MICROMETERS Schut for Precision
126
Schut.com
907.048907.047
906.124
134.00
137.00
Sold out
173.00
Sold out
Sold out
196.00
136.00
158.00
Sold out
191.00
209.00
136.00
158.00
173.00
191.00
Sold out
99.00
106.00
Schut for Precision
Measuring range/mm
1 - 15
5 - 20
20 - 35
35 - 50
50 - 65
65 - 80
80 - 95
5 - 25
25 - 45
45 - 65
65 - 85
85 - 105
5 - 25
25 - 45
45 - 65
65 - 85
Spare battery
Accuracy mm
± 0.004
± 0.004
± 0.005
± 0.005
± 0.006
± 0.006
± 0.007
± 0.004
± 0.005
± 0.006
± 0.007
± 0.008
± 0.004
± 0.005
± 0.006
± 0.007
Digital micrometers with prism-shaped anvilDigital micrometers with prism-shaped anvil for measuring the diameters of objects with an odd number of flutes such as taps, reamers
and mills. The angle of the prism aperture is designed for 3-, 5- or 7-fluted workpieces. ■ Measuring range: 1 - 105 mm. ■ Resolution: 0.001 mm. ■ Spindle: ø 6.5 mm. ■ Tungsten carbide measuring faces. The 907.047 has a pointed spindle for the smallest objects.
■ mm/inch conversion. ■ ABS/INC switchable. ■ Automatic switch-off. ■ Reset/preset. ■ Delivery with a setting standard. ■ Power supply: 1 battery type V357.
Item no.
For 3-fluted objects:
For 5-fluted objects:
For 7-fluted objects:
Option:
Price EUR
Measuring range/mm
0 - 25
25 - 50
50 - 75
Spare battery
Accuracy mm
± 0.004
± 0.004
± 0.005
Digital micrometers with pointed measuring faces ■ Measuring range: 0 - 75 mm. ■ Resolution: 0.001 mm. ■ mm/inch conversion. ■ ABS/INC switchable.
■ Preset. ■ Protection: IP54. ■ Power supply: 1 battery type V357.
Item no.
Option:
Price EUR
907.047
907.048
907.049
907.050
907.051
907.052
907.053
909.350
909.351
909.352
909.353
909.354
909.355
909.356
909.357
909.358
836.535
906.124
906.125
906.126
836.535
Schut.com
906.770
907.074
906.790
Sold out
Sold out
99.00
Sold out
115.00
124.00
135.00
Sold out
98.00
Sold out
109.00
114.00
119.00
125.00
130.00
Schut for Precision
Measuring range/mm
0 - 25
25 - 50
50 - 75
75 - 100
100 - 125
125 - 150
150 - 175
175 - 200
Descriptionmeasuring faces
flat
spherical
small
disc
knife/flat
point
knife
Set of 7 pairs Spare battery
Accuracy mm
± 0.004
± 0.004
± 0.004
± 0.005
± 0.005
± 0.005
± 0.006
± 0.006
Digital universal micrometersThanks to the seven interchangeable measuring inserts, which are available as an option, you are very flexible with these micrometers.
■ Measuring range: 0 - 200 mm. ■ Resolution: 0.001 mm. ■ Non-rotating spindle. ■ Insert shaft: ø 5 mm. ■ mm/inch conversion. ■ ABS/INC switchable. ■ On/off switch. ■ Preset (except 906.770). ■ Adjustable tolerance limits (only 906.770). ■ Power supply: 1 battery type V357.
Item no.
Digital, without measuring inserts:
Option:
Price EUR
No.
Measuring inserts, per pair:
Measuring range/mm
0 - 25
25 - 50
50 - 75
75 - 100
100 - 125
125 - 150
150 - 175
Ball ø/mm
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
6.0
Spare batterySet 907.088 - 907.097
Accuracy mm
± 0.004
± 0.004
± 0.004
± 0.005
± 0.006
± 0.006
± 0.007
Module
0.6 - 0.65
0.9 - 1.0
1.25
1.5
1.75
2
2.25
2.5
2.75
3.5
Digital gear micrometersMicrometers with ball-tipped measuring faces for measurements of straight and tapered external gears. Several measuring inserts
optionally available.
■ Measuring range: 0 - 175 mm. ■ Resolution: 0.001 mm. ■ Dimensions of anvil-tail: ø 5 x 15 mm. ■ Tungsten carbide, ball-tipped measuring faces.
Digital micrometers IP54 with pin-shaped anvilDigital micrometers for measuring e.g. (tube) wall thickness.
Digital micrometers with special measuring jawsDigital micrometers with special measuring jaws for measurements in hard-to-reach places such as cut-outs in workpieces, gear pitches, etc.
Digital gear pitch micrometersMicrometers with large, disk-shaped measuring faces for measuring e.g. gear pitches and paper and foil thickness.
The listed prices are excl. VAT. While stocks last. The terms of sales and delivery as mentioned in the catalog Measuring instruments and systems 2019/2020 apply.
