Date post: | 02-Jun-2018 |
Category: |
Documents |
Upload: | evolution-oil-tools |
View: | 217 times |
Download: | 0 times |
8/11/2019 E-Swivel One Way Operating Instructions
http://slidepdf.com/reader/full/e-swivel-one-way-operating-instructions 1/9
OPERATING INSTRUCTIONS
Product -E-Swivel Slim One-Way 262-SLIM-Rev-A 1
E-Swivel Slim One-Way
This document is intended to provide operating instructions for the E-Swivel Slim One-Way line
of Evolution Oil Tool products. This guide is property of Evolution Oil Tools Inc. and is provided tothe customer for information purposes only. It is requested that the document not be reproducedin any way, in whole or in part, or distributed without the express written consent of Evolution OilTools Inc. The document is uncontrolled if printed.
8/11/2019 E-Swivel One Way Operating Instructions
http://slidepdf.com/reader/full/e-swivel-one-way-operating-instructions 2/9
OPERATING INSTRUCTIONS
Product - E-Swivel Slim One-Way 262-SLIM-Rev-A
This document is intended to provide operating instructions for the E-SwivelSlim One-Way line of Evolution Oil Tool products. This guide is property ofEvolution Oil Tools Inc. and is provided to the customer for informationpurposes only. It is requested that the document not be reproduced in anyway, in whole or in part, or distributed without the express written consent ofEvolution Oil Tools Inc. The document is uncontrolled if printed. 2
The Evolution E-Swivel Slim One-Way tubing swivel is designed to be run in conjunction with theEvolution Tubing Rotator on pumping wells thatutilize a progressive cavity pump and an anti-rotation anchor. The tool also works with a beampumping unit and tension anchor/tubing catcher.
The Slim One-Way design has all the same
features as our CDHS Swivel, but is used inapplications where a smaller OD is called for.
The E-Swivel Slim One-Way swivel has a shearrelease that allows the anti-rotation anchor to beset. In addition, the CDHS has a built-in clutchsystem that will not allow the swivel to freely rotateif the anti-rotation anchor fails.
Advantages Maximum bypass
Operates in both tension and compression Built-in clutch system will not allow swivel to
freely rotate if the tubing anchor fails Large bore for minimal fluid flow restriction Simple shear replacement feature Available in different materials and threads on
request
8/11/2019 E-Swivel One Way Operating Instructions
http://slidepdf.com/reader/full/e-swivel-one-way-operating-instructions 3/9
OPERATING INSTRUCTIONS
Product - E-Swivel Slim One-Way 262-SLIM-Rev-A
This document is intended to provide operating instructions for the E-SwivelSlim One-Way line of Evolution Oil Tool products. This guide is property ofEvolution Oil Tools Inc. and is provided to the customer for informationpurposes only. It is requested that the document not be reproduced in anyway, in whole or in part, or distributed without the express written consent ofEvolution Oil Tools Inc. The document is uncontrolled if printed. 3
E-Swivel Slim One-Way Exploded View
NOTE - The illustration above is intended as a guide only.
8/11/2019 E-Swivel One Way Operating Instructions
http://slidepdf.com/reader/full/e-swivel-one-way-operating-instructions 4/9
OPERATING INSTRUCTIONS
Product -E-Swivel Slim One-Way 262-SLIM-Rev-A 4
Installation/
SettingProcedure
1 Tighten all screws as a
double-check prior to
threading onto tubing.
2 Apply pipe dope to swivel
threads and thread the
swivel, box end up, onto
lower pin of tubing abovethe pump, taking care to
torque as close to the upper
thread as possible. Tighten
to EUE specifications.
Note Tubing may not be exactly as shown.
8/11/2019 E-Swivel One Way Operating Instructions
http://slidepdf.com/reader/full/e-swivel-one-way-operating-instructions 5/9
OPERATING INSTRUCTIONS
Product - E-Swivel Slim One-Way 262-SLIM-Rev-A
This document is intended to provide operating instructions for the E-SwivelSlim One-Way line of Evolution Oil Tool products. This guide is property ofEvolution Oil Tools Inc. and is provided to the customer for informationpurposes only. It is requested that the document not be reproduced in anyway, in whole or in part, or distributed without the express written consent ofEvolution Oil Tools Inc. The document is uncontrolled if printed. 5
3 Attach the lower pin end of
the swivel to the box end of
the tubing connecting below
it, again taking care totorque as close to the thread
as possible. DO NOT torque
through the swivel to tighten
the tubing string.
4 Run downhole to depth.
Rotate right to tighten the
tension or torque anchor as
per anchorrecommendations.
8/11/2019 E-Swivel One Way Operating Instructions
http://slidepdf.com/reader/full/e-swivel-one-way-operating-instructions 6/9
OPERATING INSTRUCTIONS
Product - E-Swivel Slim One-Way 262-SLIM-Rev-A
This document is intended to provide operating instructions for the E-SwivelSlim One-Way line of Evolution Oil Tool products. This guide is property ofEvolution Oil Tools Inc. and is provided to the customer for informationpurposes only. It is requested that the document not be reproduced in anyway, in whole or in part, or distributed without the express written consent ofEvolution Oil Tools Inc. The document is uncontrolled if printed. 6
5 Pull upstrain to confirm the
anchor is properly anchored
in place.
6 Relax upstrain and rotate
the swivel until the brass
shear screws shear. At this
point the tubing swivel isfreely rotatable in one
direction.
8/11/2019 E-Swivel One Way Operating Instructions
http://slidepdf.com/reader/full/e-swivel-one-way-operating-instructions 7/9
OPERATING INSTRUCTIONS
Product - E-Swivel Slim One-Way 262-SLIM-Rev-A
This document is intended to provide operating instructions for the E-SwivelSlim One-Way line of Evolution Oil Tool products. This guide is property ofEvolution Oil Tools Inc. and is provided to the customer for informationpurposes only. It is requested that the document not be reproduced in anyway, in whole or in part, or distributed without the express written consent ofEvolution Oil Tools Inc. The document is uncontrolled if printed. 7
7 Pull upstrain again to
required tension and lock-in
at surface.
8/11/2019 E-Swivel One Way Operating Instructions
http://slidepdf.com/reader/full/e-swivel-one-way-operating-instructions 8/9
OPERATING INSTRUCTIONS
Product - E-Swivel Slim One-Way 262-SLIM-Rev-A
This document is intended to provide operating instructions for the E-SwivelSlim One-Way line of Evolution Oil Tool products. This guide is property ofEvolution Oil Tools Inc. and is provided to the customer for informationpurposes only. It is requested that the document not be reproduced in anyway, in whole or in part, or distributed without the express written consent ofEvolution Oil Tools Inc. The document is uncontrolled if printed. 8
Specifications
One-Way
Swivel Size
(in/ mm )
Max OD
(in/ mm )
Min ID
(in/ mm )
Tool Length
(in/ mm ) Part Number
2 7/8
( 88.9 )
3.80
( 96.5 )
2.88
( 73.2 )
15.86
( 402.8 )105234
3 1/2
( 88.9 )
4.188
( 106.38 )
3.75
( 95.3 )
16.75
( 426.2 )105232
4 1/2
( 114.3 )
5.66
( 143.8 )
4.75
( 120.7 )
16.79
( 426.5 )105230
If you have any other questions or concerns, do not hesitate to contact us:
8/11/2019 E-Swivel One Way Operating Instructions
http://slidepdf.com/reader/full/e-swivel-one-way-operating-instructions 9/9
OPERATING INSTRUCTIONS
Product - E-Swivel Slim One-Way 262-SLIM-Rev-A
This document is intended to provide operating instructions for the E-SwivelSlim One-Way line of Evolution Oil Tool products. This guide is property ofEvolution Oil Tools Inc. and is provided to the customer for informationpurposes only. It is requested that the document not be reproduced in anyway, in whole or in part, or distributed without the express written consent ofEvolution Oil Tools Inc. The document is uncontrolled if printed. 9
www.eotools.com
Canada
#3, 1820 – 30 th Avenue NECalgary, Alberta, Canada
T2E 7M5Toll Free: 1-800-265-TOOL (8665)
Main: (403) 243-1442Fax: (403) 258-2614
6415A – 63 St. CloseLloydminster, Alberta
Tel: 780-875-1570Cell: 780-522-8294Cell: 780-870-1126
4512 – 81 AveEdmonton, AlbertaTel: 587-758-9091Cell: 780-919-1722
Cell: 780-893-1019
US
P.O. Box 5363
2908 Coffey StreetVictoria, Texas 77903Main: (361) 575-7900Fax: (361) 575-8081
3400 Kermit Hwy
Odessa, Texas 79764Tel: 432-337-7900Fax: 432-337-7901Cell: 432-638-7902