Date post: | 07-Mar-2016 |
Category: |
Documents |
Upload: | steelpress-sp |
View: | 257 times |
Download: | 6 times |
., RDW Vehicle Technology Oivision
@)
THE NETHERLANDS(NED ERLAND)
aD-COMMUNICATION
Conceming (I):
-approval grantcd-approval extended
appro'y'al refusedapproval "lithdrawnproduetion definitely diseontinued
of a type of mechanical coupling device or component pursuant to Regulation number 55.
Approval number: E4-55R-010029 Extension number: 01
Approval mark:E4 55R-Ol 0029
2.
3.
4.
5.
6.
7.
1. Trade name or mark of the device or
component : STEELPRESS
Manufacturer's name for the type ofdevice or component : ZSK-1300
Manufacturer's name and address : STEELPRESS Sp. z 0.0.u1.PowstancowWielkopolskich 48PL-62-03l Lubon - Poznan
If applicable, name and address of themanufacturer's representative
Alternative supplier's name or trademarks applied to the device orcomponent
Name and address of company or bodytaking responsibility for the conformityof production : STEELPRESS Sp. z 0.0.
u1.PowstancowWielkopolskich 48PL-62-031 Lubon - Poznan
Submitted for approval on
'"
P.O. Box 777
2700 AT Zoetenneer
The Netherlands
Vehicle Approval and InformationTel. + 31 (0)79345 81 43Fax + 31 (0)79 345 8043www.rdw.nl
Coupling-component R55-01 v5.00 Page l of3
Approval number: E4-55R-010029 Extension number: 01
8. Technical service responsib1e forcondueting approva1 tests : DEKRA Automobil GmbH
Automobil Test CenterSenftenberger StraBe30D-01998 K1ettwitz
9. Brief description
9.1. Type and c1assof device or component : Coup1inghead, C1assB50-X
9.2. Characteristic va1ues
9.3. For c1assA mechanical coupling devices or components, inc1udingtowing brackets:
Vehic1e manufacturer' s maximum
permissib1e vehic1e mass : ... kg
Distribution of maximum permissib1evehic1emass between the ax1es
Vehic1e manufacturer' s maximum
permissib1e towab1e trailer mass : ..0 kg
Vehic1emanufacturer's maximumpermissib1e static mass on coup1ingbalI : ... kg
Maximum mass of the vehic1e,withbodywork, in running order, inc1udingcoo1ant,oils, fue1,too1sand sparewhee1(if supplied) but not inc1udingdriver : ... kg
Loading condition under which thetow balI height of a mechanicalcoup1ingdevice fitted to category MIvehic1esis to be measured - seeparagraph 2 of annex 7, appendix 1: : not applicab1e
10. Instructions for the attachment of the coupling device or component type to the vehic1eandphotographs or drawings of the mounting points given by the vehic1emanufacturer:see instructions for attachment and use .
Coupling-component R55-01 v5.00 Page20[3
9.2.1. Primary va1ues:
I
D
I
U
I
De
I
V
I
S(kN) (tonnes) (kN) (kN) (kg)12,3 - - - 100
Altemative va1ues:
I
D
I
U
I
De
[;) __I
S(kN) (tonnes) (kN) (kg)-
Approval number: E4-55R-010029
11.
..
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
Extension number: 01
Information on the fitting of any special reinforcing brackets or plates or spacingcomponents necessary for the attachment of the coupling device or component:not applicable
Additional information where the use ofthe coupling device or component is restricted tospecial types ofvehicles - see annex 5, paragraph 3.4.:not applicable
For Class K hook type couplings, details ofthe drawbar eyes suitable for use with theparticular hook type:not applicable .
Date of test report
Number of test report
Approval mark position
Reason( s) for extension of approval
Approval
Place
Date
Signature
: 29-8-2007
: 200207869 Extension 01
: on housing
: constructive modifications
: granted/extended/refused/withdrawn (1)
The list of documents deposited with the Administration Service which has grantedapproval is annexed to this communication and may be obtained on request.
- Test report as mentioned in item 15-Instruction for attachment and use-Drawings
(1) Strike out what does not apply.
Coupling-component R55-01 v5.00
a.
Page3 oj 3