2014-03 002.001 ENG
Head Office & Factory153, Jeongdong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do
Tel +82 55 280 9206, 9299 Fax +82 55 210 9804
www.wiamachine.co.kr
Overseas Sales Team16F, 37, Cheoldobangmulgwan-ro, Uiwang-si, Gyeonggi-do
Tel +82 31 593 8173
E200 SeriesHYUNDAI WIA CNC Turning Center
The CNC Turning Center E200 Series was developd by Hyundai Wia, a Korean manufacturer of traditional machine tools. The strength of its accumulated knowhow and state-of-the-art technology, is designed to maximize productivity by enhancing both technical performance and economic efficiency.
Technical Leader
6″ 8″ LM Box Standard TurnMill
Chuck GuideWay Turret
● ● ●
● ● ●
● ● ●
● ● ●
● ● ●
● ● ●
ITEM
E200A
E200C
E200MA
E200MC
E200PA
E200PC
High Speed, High Rigidity and High Productivity- The next generation affordable CNC Lathe
E200 Series● 45° slanted one-piece high rigidity bed structure
● Least heat distortion, the most stabilized unit structure
● Able to extend, and high productive machine structure
● Unbeatable rapid travel speed : 36m/min (E200A/MA/C/MC)
● The most reliable high speed servo turret is adopted: 0.1sec/step
● Application of a Box Guide to handle heavy cutting (E200PA/PC)
● Compact design, able to install within a narrow space.
● Ergonomic design allows convenient access to chuck and tool
01 Basic FeaturesThe Best Productivity Popular 6 inch / 8 inch Compact CNC Turning CenterE200 Series
Main SpindleThe main spindle is designed in such a way that heat is blocked by the integrated base in bilateral symmetry and the insulating panel, making it possible to maintain a high degree of accuracy even during a long period of operation.
TurretWith installing high speed servo turret of 12 angles, tool split speed is increased (0.12sec/1step) and its cycle time is reduced, which improves productivity.
Ball ScrewThe Ball screw is fixed by a double anchor type, which places it in parallel with guide way and achieves a stable forwarding. Importantly, a ball screw with larger diameter is adopted and prepressure is applied, which improves thermal deformation and hardness.
High precision, High Rigidity All in One StructureA 45 degree slope type bed is combined with square type and tube type rib structure, which maintains a high rigidity. As absorption capablilty for vibration is good, powerful cutting and high precision maintaining is allowed.
01
04
0302
LM Guide(E200A/MA/C/MC)
Box Guide(E200PA/PC)
GuidewayAll axis of E200A/C have LM Guide installed, which has better speed and responsiveness.
This reduces non-cutting time and achieves 36m/min of quick forwarding, which increases productivity.
E200PA/PC designed for heavy duct cutting has Box Guides at all axis, which presents a stable processing capability even under heavy load.
◉ Rapid Travel (X/Z axis)
E200A | E200C | E200MA | E200MC : 36/36 m/min E200PA | E200PC : 24/24 m/min
◉ Travel(X/Z axis)
E200A | E200C : 210/330mm E200MA | E200MC : 210/286mm E200PA | E200PC : 210/310mm
Reductionofnon-cuttingtimebyrapidspeed
04+
05
E2
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
Basic Features
01
02
04
03
02 High-Precision SpindleLong Lasting High Accuracy & Excellent PerformanceCNC Turning CenterE200 Series
Main SpindleThe spindle has wide span of nominal production and the same axis structure as that of a high precision lathe, which is designed to minimize thermal deformation and make high precision cutting even with high speed and repeated cutting. By enlarging the spindle diameter and thickness its hardness is increased. Especially, its design adopting high precision angular ball bearing reduces noise and increases accuracy.
Tail StockMade it possible to process cutting stably by adopting 80mm movable tailstock as an option and it also provides excellent quality.
Taper : MT4Quill Dia. : Ø65 Travel : 80 mm
0.001° C-Axis ControlC axis with BZ-Sensor attached performs 0.001°(Command) split angle and position control with 100 rpm, which is capable of high value added contour control using rotating tools.
Spindle
15kW (15min)
Spindle Speed (r/min) Spindle Speed (r/min)
Spindle Speed (r/min) Spindle Speed (r/min)
95.6N.m (15min)95.6 62
45.5
167
92
52.552.5N.m(Cont.)
62N.m (30min)
45.5N.m(Cont.)
11kW (Cont.)
6,000
1,143 2,570
2,000 3,0001,500
15kW (30min)
E200C/PC
167N.m (30min)
Power(kW) Torque(N.m) E200MCPower(kW) Torque(N.m)
E200A/PAPower(kW) Torque(N.m) E200MAPower(kW) Torque(N.m)
92N.m(Cont.)
11kW (Cont.)
11kW (30min)
105N.m (30min)
71.6N.m(Cont.)
7.5kW (Cont.)
7.5kW (30min)
5.5kW (Cont.)
Spindle Speed (r/min)
75.6
10.8
968.7
1,500500 4,500 6,000
E200A/PAPower(kW) Torque(N.m)
10.8kW (S6 60%)
9kW (Cont.)75.6N.m (S6 60%)
68.7N.m (Cont.)
Spindle Speed (r/min)
132.310.8
9110.3
857286 2,571 4,000
E200C/PCPower(kW) Torque(N.m)
10.8kW (S6 60%)
9kW (Cont.)
132.3N.m (S6 60%)
110.3N.m (Cont.)
15kW (15min)
Spindle Speed (r/min) Spindle Speed (r/min)
Spindle Speed (r/min) Spindle Speed (r/min)
95.6N.m (15min)95.6 62
45.5
167
92
52.552.5N.m(Cont.)
62N.m (30min)
45.5N.m(Cont.)
11kW (Cont.)
6,000
1,143 2,570
2,000 3,0001,500
15kW (30min)
E200C/PC
167N.m (30min)
Power(kW) Torque(N.m) E200MCPower(kW) Torque(N.m)
E200A/PAPower(kW) Torque(N.m) E200MAPower(kW) Torque(N.m)
92N.m(Cont.)
11kW (Cont.)
11kW (30min)
105N.m (30min)
71.6N.m(Cont.)
7.5kW (Cont.)
7.5kW (30min)
5.5kW (Cont.)
Spindle Speed (r/min)
75.6
10.8
968.7
1,500500 4,500 6,000
E200A/PAPower(kW) Torque(N.m)
10.8kW (S6 60%)
9kW (Cont.)75.6N.m (S6 60%)
68.7N.m (Cont.)
Spindle Speed (r/min)
132.310.8
9110.3
857286 2,571 4,000
E200C/PCPower(kW) Torque(N.m)
10.8kW (S6 60%)
9kW (Cont.)
132.3N.m (S6 60%)
110.3N.m (Cont.)
The characteristics of 1PH8 Series Motors include a maximum concentricity of 10㎛, unsurpassed quality and a short operating period, which make them stand out as superb machine tools in quality and performance.
1PH8SpindleMotor
FANUC06+
07
E2
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
03 Servo TurretHigh speed, High Accuracy, Highly Reliable Servo Turret E200 Series
TurretThe E200 Series has a high performance AC servo motor and 3-piece coupling attached which enhances its process reliability. Powerful tool clamping using hydraulics minimizes tool tip deviation due to load, which displays excellent performance during heavy duty cutting.
◉ Number of Tools : 12EA
◉ Tool Size (O.D/I.D)
□20 / Ø32◉ Indexing Time :0.12sec/step
◉ Number of Tools : 12EA
◉ Tool Size (O.D/I.D)
□25 / Ø40◉ Indexing Time :0.12sec/step
E200A | PA
E200C | PC
◉ Number of Tools : 12EA
◉ Tool Size (O.D/I.D) □20/ Ø32◉ Indexing Time :0.23sec/step
E200MA | MC
08+
09
E2
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
Turret
Mill Tool HolderLive milling tools may utilize an ER collet adapter, allowing both faces to be fixed. This provides increased accuracy and repeatability.
VDI type enables exchange of tools and reduction of its time, which facilitate tooling.
◉ Output (Max./Cont.) : 7.6 / 3 kW
◉ Speed : 4,500rpm
◉ Collet size :Ø16 (ER25)◉ Type :VDI30
Mill Turret (VDI)
U-Drill
Collet & Cap
Endmill
Endmill
Drill
Tap
Drill
Tap
Face Cutter
Angular Milling HeadStraight Milling Head
04 Machining CapabilityExcellent Performance, High Accuracy CuttingCNC Turning CenterE200 Series
10+
11
E2
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
Machining
O.D Cutting
Face Cutting
Drilling
End Milling
I.D Cutting
O.D Hole Drilling
I.D Threading
Ball-End Milling
❖ The above result might be different by types of processing circumstance
Machining Variation
Sample Workpiece
E200A
Processing diameterSide cutting depthCutting speedSpindle rpmForwarding speedChip discharge
Ø424 mm198 m/min1,500 r/min0.45 mm/rev356 cc/min
Work diameterDrill diameterCutting speedSpindle rpmForwarding speedChip discharge
Ø70Ø37 mm104 m/min895 r/min0.4 mm/rev385 cc/min
DrillingCutting (O.D)
〈Material〈JIS〉:S45C(Carbon steel〉 〈Material〈JIS〉:S45C(Carbon steel〉
E200MA
Processing depthDrill diameterCutting speedSpindle rpmForwarding speedChip discharge
15 mmØ12 mm36 m/min960 r/min0.5 mm/rev17 cc/min
Processing depthTap spec / pitchCutting speedSpindle rpmForwarding speed
20 mmM12/1.758 m/min212 r/min1.75 mm/rev
Drilling Tapping
〈Material〈JIS〉:S45C(Carbon steel〉
Processing depthDrill diameterCutting speedSpindle rpmForwarding speedChip discharge
15 mmØ12 mm162 m/min995 r/min0.4 mm/rev180 cc/min
Processing depthTap spec / pitchCutting speedSpindle rpmForwarding speed
20 mmM12/1.758 m/min121 r/min1.75 mm/rev
X-Axis Drilling Tapping
〈Material〈JIS〉:S45C(Carbon steel〉 〈Material〈JIS〉:S45C(Carbon steel〉
〈Material〈JIS〉:S45C(Carbon steel〉
Processing diameterSide cutting depthCutting speedSpindle rpmForwarding speedChip discharge
Ø523 mm162 m/min995 r/min0.4 mm/rev180 cc/min
Work diameterDrill diameterCutting speedSpindle rpmForwarding speedChip discharge
Ø50Ø22 mm28 m/min400 r/min0.4 mm/rev61 cc/min
DrillingCutting (O.D)
〈Material〈JIS〉:S45C(Carbon steel〉 〈Material〈JIS〉:S45C(Carbon steel〉
HYUNDAI WIA Smart System
for CNC
Turning Center
Monitoring Functions Energy Saving
Easy Programming
HW-MMS | HW-TMHW-ESS
HW-DPRO T/TM | HW-eDNC
User Friendly
Faster processing programming and enhanced processing accuracy are possible through HYUNDAI WIA Smart System. It also maximizes productivity through equipment monitoring and environment-friendly software.
USB Port (Standard)Convenience is increased when inputting and outputting program. Because it is now capable of using USB port in addition to current way like CF memory card or LAN
05 Smart SystemSoftware for smart operating and machiningE200 Series
HW-TM(HYUNDAIWIA–ToolMonitoring)This is an equipment-monitoring software which checks the overload, attrition and possible damage of equipment by analyzing the spindles and the output load of the feed shaft generated during a processing operation.
HW-DPRO T/TM(HYUNDAIWIA–DialoguePROgramTurn/TurnMill)Using a dialogue method, this software makes it easy to work out a program for a lathe processing operation with complicated configurations. (Can be installed on a PC.)
HW-MMS(HYUNDAIWIA–MachineMonitoringSystem)
This software is for remote control monitoring of equipment status (mobile, PC.) It checks and manages the state of multiple pieces of equipment and the progress of processing on a real time basis.
HW-eDNC(HYUNDAIWIA–EthernetDirectNumericalControl)This software transmits and receives the CNC of processing equipment, the processing program and the NC data on a PC through the internet or serial communications, while managing the processing program of the CNC memory.
HW-ESS(HYUNDAIWIA–EnergySavingSystem)This is an environment-friendly power reduction software reducing the standby power unnecessarily wasted in the equipment waiting for a processing operation.
HYUNDAI WIA Smart System
12+
13
E2
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
DIFFERENTIATED CAPABILITIES, INTEGRATED ENGINEERING PERFECTLY INTERLINKEDSIEMENS 828D is a latest model CNC that is capable of installing a maximum of 6 spindles. It is designed for horizontal/vertical all-purpose equipment.
Through a 80-bit control, it makes possible reduction of processing time and enhancement of productivity. It supports the preparation of a variety of programs and setup functions. It is easy to handle.
• Dialogue-type programming, simple and convenient
• Effective specifications for small quantity batch production
• Step-by-step operation possible without knowledge of the DIN/ISO code
Shop Turn
• 3-dimensional (3D) confirmation (an option) of the completed processing configuration of the NC program is possible.
• Offers standards for 2-dimensional simulation (2D.)
• Possible to confirm the simulation of the NC grogram during processing.
3D Simulation
• Easy to install/uninstall an option (Example: barfeeder and chip conveyor, etc.)
• Possible to install in one motion without revision of individual perimeters.
• A spate list is unnecessary as option items are indicated with letters.
Easy Extend
Easy input/output of a program is possible as a USB memory card, a CF memory card and LAN can all be used.
RJ 45 Ethernet
USB 2.0
Compact Flash Card
Variable Communication Port
If the ISO Dialect (G291) is ordered, JIS-based G-code programs can be used. (Standard)
SIEMENS Technology SIEMENS Communication Function
ISO CodeProgramming
SIEMENS Convenience Function SIEMENS Easy Programming
• Easy calculation (automatic and manual) of the offset values of the installed equipment
• Automatic input of the measured offset values of equipment into the equipment list
Easy Tool Measuring
• Supports the function of work offset calculation
• Automatic application of the measured work offset value as the activated work offset
Work Offset Measuring
• Real time monitoring of PLC programs is possible. Supports the “search” and “cross reference” functions.
• Real time verification of NC variables and PLC interface
• Input/change of the values of variables
Real Time PLC Monitoring
• Program can be re-started from a particular location without editing the processing program.
• Provides safety to the user.
Block Searching
• A maximum of 500 alarms can be stored. • The entire alarm log can be stored as a
data file in the NC • The overall alarm history can be checked
through the alarm log.
Alarm Log
•Useofcycleprogramminimizesprogramcapacity.•Whencyclevariablesareinput,graphicimagesareprovided.•Toolpathandsimulationofcompletedcycleprogramareavailable.•Variousconfigurationscanbeprocessedusingcycles.
•Letterscanbeprocessedonproductsbyestablishingaplaneandinputtingletters.•Lettersize/angle/location/directioncanbedesignated.•CapitalandsmalllettersofEnglishcanbeprocessed.
Program Guide SimpleProgram,HighProductivity
Engraving CycleSimpleLetterProcessingisPossible.
Controller
14+
15
E2
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
06 User ConvenienceVarious Devices for User Friendly
E200 Series
Parts ConveyorAn optional parts catcher collects finished parts without the need to open the door, adding productivity, especially when a bar feeder is attached
Long Type 3m (118.1″)Max load processing capa. Ø42 (1.7″)Shot Type 1.5m (59.1″)Max load processing capa. Ø65 (2.6″)
Bar Feeder System
Bar Feeder When machining from bar stock, a bar feeder allows forimproved efficiency and unattended machining
RoundBarMaterial
Bar Feeder Machining Parts Catcher Parts Conveyor
Bar Feeder Machining Process
E2
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
Optional
16+
17
Gantry Loader System
Raw Material In Work Stocker 1st Machining
Finishing Out Work Stocker 2nd Machining
Construction of high speed gantry loaders is possible as well as the construction of flexible automation cells by a work stocker. Optimization of the installation space is also possible. In particular, excellent machining effect is achieved during continuous machining of both sides of the same or different work
Gantry Loader Machining Process
Turn Over
Standard & Optional
Main SpindleHollow Chuck 3 JawMain SpindleSolid Chuck 3 JawStandard Soft Jaw (1set)Chuck Clamp Foot Switch2 Steps Hyd, Pressure DeviceSpindle Inside Stopper5° IndexCs-Axis (0.001°)Chuck Open/Close Confirmation Device2 Steps Chuck Foot SwitchTurretTool HolderMill TurretStraight Milling Head (Axial)Angular Milling Head (Radial)Straight Milling Head (Axial)Angular Milling Head (Radial)Boring SleeveDrill SocketU-Drill HolderU-Drill Holder SleeveO.D Extension HolderSwivel HeadTail Stock & Steady RestQuill Type Tail StockProgramable Tail StockManual Type Hyd. Steady RestStandard Live Center (Tail Stock : Standard)High Precesion Live Center2 Steps Tail Stock Pressure SystemQuill Forward/Reverse Confirmation DeviceTail Stock Foot SwitchCoolant & Air BlowStandard Coolant (Nozzle)Chuck Coolant (Upper Chuck)Gun CoolantSpindle Thru Coolant (Only for Special Chuck)Thru Coolant for Live ToolChuck Air Blow (Upper Chuck)Tail Stock Air Blow (Upper Tail Stock)Turret Air BlowAir GunSpindle Thru Air Blow (Only for Special Chuck)High Pressure CoolantPower Coolant System (For Automation)Coolant ChillerChip DisposalCoolant TankChip Conveyor(Hinge/Scraper)Special Chip Conveyor (Drum Filter)
Chip Wagon
Safety DeviceDoor Inter-LockTotal Splash GuardChuck Pressure Failure DetectorBack Spin Torque Limiter (BST)Torque Limiter
6″8″6″8″
AxiallCollet Type,1eaCollet Type,1eaAdapter TypeAdapter Type
For Out-Dia
6Bar
135ℓFront(Right)Front(Left)
Standard(180ℓ)Swing(200ℓ)Swing Large Size(290ℓ)Large Size(330ℓ)Costomized
Spindle & Chuck Electric Device
● : Standard ○ : Option ☆ : Prior Consultation - Non Application
E200A/PA E200MA ● ● ○ ○ ○ ○ ☆ ☆ ● ● ● ● ○ ○ ☆ ☆ ☆ - - ● ● ● ○ ○ ● ● - ● - ● - ● - ☆ - ☆ ● ● ● - ○ ○ ○ ○ ☆ - - ○ ○ ○ - - - - ○ ○ ○ ○ ☆ ☆ ○ ○ ☆ ☆ ● ● ○ ○ ○ ○ ☆ ☆ - - ○ ○ ○ ○ ☆ ☆ ○ ○ ☆ ☆ ○ ○ ☆ ☆ ☆ ☆ ● ● ○ ○ ○ ○ ☆ ☆ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ ● ● ● ● ● ● ● ● ○ ○
E200A/PA E200MA ● ● ○ ○ ○ ○ ○ ○ - - ○ ○ ● ● ○ ○ ● ● ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ●/○ ○ ● - ☆ ☆ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ - - - - ☆ ☆ ○ ○ ● ● ○ ○ ○ ○ ○ ○ ☆ ☆ ○ ○ ☆ ☆ ☆ ☆ ○ ○ ☆ ☆ ○ ○ ○ ○ ☆ ☆ ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ ☆ ☆ ☆ ● ● ● ● ☆ ☆ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ ● ● ☆ ☆ ☆ ☆
Call LightCall LightCall Light & BuzzerElectric Cabinet LightRemote MPGSpindle Load Meter(LED Type)Spindle Speed Meter(LED Type)Work CounterTotal CounterTool Counter
Multi Tool Counter
Electric Circuit Breaker
ABS Encoder
AVR (Auto Voltage Regulator)TransformerFlash Memory CardAuto Power OffMeasurementQ-SetterAutomatic Q-SetterWork Close Confirmation Device(Only for Special Chuck)Work Setter
Linear Scale
Coolant Level Sensor (Only for Chip Conveyor)Environment
Air Conditioner
DehumidifierOil Mist CollectorOil Skimmer (Only for Chip Conveyor)MQL (Minimal Quantity Lubrication)Fixture & AutomationAuto DoorAuto Shutter (Only for Automatic System)Sub Operation PannelBar Feeder InterfaceBar Feeder (FEDEK)workpusher (Spring type)Extra M-Code 4eaAutomation Interface
I/O Extension (IN & OUT)
Parts CatcherTurret Work Pusher (For Automation)Parts ConveyorSemi Automation SystemHyd. DeviceStandard Hyd. CylinderStandard Hyd. UnitS/WMachine Guidance (HW-MCG : FANUC)Tool Monitoring (HW-TM : FANUC)DNC software (HW-eDNC : FANUC)Interactive ProgramEnergy Saving System (HW-ESS : FANUC)Machine Monitoring System (HW-MMS : FANUC)ETCTool BoxCustomized ColorCAD & CAM
1Color : ■3Color : ■■■3Color : ■■■B
FANUC (Mounted Type)SIEMENS (Built-in Type)FANUC (Mounted Type)SIEMENS (Built-in Type)DigitalDigitalDigital6ea9ea
FANUCSIEMENS
20kVA
TACOSMC
X axisZ axis
FANUCSIEMENS
16Contact32ContactMain SP.
Hollow35bar/11ℓ
Need Munsel No.
The specifications as above will only serve as a reference.
SPECIFICATIONS
Standard & Optional
Main SpindleHollow Chuck 3 JawMain SpindleSolid Chuck 3 JawStandard Soft Jaw (1set)Chuck Clamp Foot Switch2 Steps Hyd, Pressure DeviceSpindle Inside Stopper5° IndexCs-Axis (0.001°)Chuck Open/Close Confirmation Device2 Steps Chuck Foot SwitchTurretTool HolderMill TurretStraight Milling Head (Axial)Angular Milling Head (Radial)Straight Milling Head (Axial)Angular Milling Head (Radial)Boring SleeveDrill SocketU-Drill HolderU-Drill Holder SleeveO.D Extension HolderSwivel HeadTail Stock & Steady RestQuill Type Tail StockProgramable Tail StockManual Type Hyd. Steady RestStandard Live Center (Tail Stock : Standard)High Precesion Live Center2 Steps Tail Stock Pressure SystemQuill Forward/Reverse Confirmation DeviceTail Stock Foot SwitchCoolant & Air BlowStandard Coolant (Nozzle)Chuck Coolant (Upper Chuck)Gun CoolantSpindle Thru Coolant (Only for Special Chuck)Thru Coolant for Live ToolChuck Air Blow (Upper Chuck)Tail Stock Air Blow (Upper Tail Stock)Turret Air BlowAir GunSpindle Thru Air Blow (Only for Special Chuck)High Pressure CoolantPower Coolant System (For Automation)Coolant ChillerChip DisposalCoolant TankChip Conveyor(Hinge/Scraper)Special Chip Conveyor (Drum Filter)
Chip Box
Safety DeviceDoor Inter-LockTotal Splash GuardChuck Pressure Failure DetectorBack Spin Torque Limiter (BST)Torque Limiter
6″8″6″8″
AxiallCollet Type,1eaCollet Type,1eaAdapter TypeAdapter Type
For Out-Dia
6Bar
135ℓFront(Right)Front(Left)
Standard(180ℓ)Swing(200ℓ)Swing Large Size(290ℓ)Large Size(330ℓ)Costomized
Spindle & Chuck Electric Device
● : Standard ○ : Option ☆ : Prior Consultation - Non Application
E200C/PC E200MC - - ● ● - - ○ ○ ● ● ● ● ○ ○ ☆ ☆ ☆ - - ● ● ● ○ ○ ● ● - ● - ● - ● - ○ - ○ ● ● ● - ○ ○ ○ ○ ☆ - - ○ ○ ○ - - - - ○ ○ ○ ○ ☆ ☆ ○ ○ ☆ ☆ ● ● ○ ○ ○ ○ ☆ ☆ - - ○ ○ ○ ○ ☆ ☆ ○ ○ ☆ ☆ ○ ○ ☆ ☆ ☆ ☆ ● ● ○ ○ ○ ○ ☆ ☆ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ ● ● ● ● ○ ○ ● ● ○ ○
E200C/PC E200MC ● ● ○ ○ ○ ○ ○ ○ - - ○ ○ ● ● ○ ○ ● ● ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ●/○ ○ ● - ☆ ☆ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ - - - - ☆ ☆ ○ ○ ● ● ○ ○ ○ ○ ○ ○ ☆ ☆ ○ ○ ☆ ☆ ☆ ☆ ○ ○ ☆ ☆ ○ ○ ○ ○ ☆ ☆ ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ ☆ ☆ ☆ ● ● ● ● ☆ ☆ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ ● ● ☆ ☆ ☆ ☆
Call LightCall LightCall Light & BuzzerElectric Cabinet LightRemote MPGSpindle Load Meter(LED Type)Spindle Speed Meter(LED Type)Work CounterTotal CounterTool Counter
Multi Tool Counter
Electric Circuit Breaker
ABS Encoder
AVR (Auto Voltage Regulator)TransformerFlash Memory CardAuto Power OffMeasurementQ-SetterAutomatic Q-SetterWork Close Confirmation Device(Only for Special Chuck)Work Setter
Linear Scale
Coolant Level Sensor (Only for Chip Conveyor)Environment
Air Conditioner
DehumidifierOil Mist CollectorOil Skimmer (Only for Chip Conveyor)MQL (Minimal Quantity Lubrication)Fixture & AutomationAuto DoorAuto Shutter (Only for Automatic System)Sub Operation PannelBar Feeder InterfaceBar Feeder (FEDEK)workpusher (Spring type)Extra M-Code 4eaAutomation Interface
I/O Extension (IN & OUT)
Parts CatcherTurret Work Pusher (For Automation)Parts ConveyorSemi Automation SystemHyd. DeviceStandard Hyd. CylinderStandard Hyd. UnitS/WMachine Guidance (HW-MCG : FANUC)Tool Monitoring (HW-TM : FANUC)DNC software (HW-eDNC : FANUC)Interactive ProgramEnergy Saving System (HW-ESS : FANUC)Machine Monitoring System (HW-MMS : FANUC)ETCTool BoxCustomized ColorCAD & CAM
1Color : ■3Color : ■■■3Color : ■■■B
FANUC (Mounted Type)SIEMENS (Built-in Type)FANUC (Mounted Type)SIEMENS (Built-in Type)DigitalDigitalDigital6ea9ea
FANUCSIEMENS
20kVA
TACOSMC
X axisZ axis
FANUCSIEMENS
16Contact32ContactMain SP.
Hollow35bar/11ℓ
Need Munsel No.
The specifications as above will only serve as a reference.
18+
19
E2
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
SPECIFICATIONS
unit : mm(in)External Dimensions
SPECIFICATIONS
1443(56.8)577(22.7)
2020(79.5) 2050(80.7) 1260(49.6) 1230(48.4)
3280(129.1)
380(
14.9
)12
70(5
0)
2150
(84.
6)
500
R500
1000(39.3)
SPINDLE CENTER
1100(43.3)550(21.6)
1650(65)910(35.8)
2560(100.7)
10 (0.4
)66
5((2
6.2)
335
(13.
2)10
35(4
0.7)
110
(4.3
)11
45(4
5)67
5(26
.5)
1820
(71.
6)
380(14.9)
SPLINDLE CENTER
950(
37.4
)27
5(1
0.8)
192
(7.5
)12
24(4
8.1)
1416
(55.
7)
538(21.2)8(0.3)
920(36.2)933(36.7)
Ø16
9(6.
6)Ø
210(
8.2)
E200A/MA/PA E200C/MC/PC
12 Stations
VDI 3012 Stations
O.D Holder
I.D Holder
Boring BarSocket
Facing Holder
Face & I.DTool
Boring Bar
Drill
Boring BarBoring Bar
Socket
U-Drill Socket U-Drill Holder
Boring BarHolder Pice
Facing Holder
Face & I.D Tool
Boring BarØ32
Drill
U-Drill
Tap
End Mill
StraightMill Holder
Milling Collet
Tapping Collet
AngularMill Holder
Plug
unit : mm(in)Tooling System
20+
21
E2
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
SPECIFICATIONS
E200A/PAE200C/PC
Right/Left
Single
Ø32
Ø40
Standard
Standard
Ø8 (5/16″)
Ø10 (3/8″)
Ø12 (1/2″)
Ø16 (5/8″)
Ø20 (3/4″)
MT 1 × MT 2
MT 2
O.D Holder
Facing Holder
I.D Holder
U-Dril Holder
Straight Mill Holder
Angular Mill Holder
Boring
Drill
ER Collet
Turning Holder
Driven Holder
Boring Holder
Socket
ITEM E200A/PA E200C/PC
- -
1 1
5 5
Opt -
- Opt
- -
- -
- -
1 1
1 1
1 1
1 1
1 1
1 1
- -
Tooling Parts Detail
Specifications are subject to change for improvement without notice.
unit : mm(in)Tooling System
SPECIFICATIONS
12 Stations
VDI 3012 Stations
O.D Holder
I.D Holder
Boring BarSocket
Facing Holder
Face & I.DTool
Boring Bar
Drill
Boring BarBoring Bar
Socket
U-Drill Socket U-Drill Holder
Boring BarHolder Pice
Facing Holder
Face & I.D Tool
Boring BarØ32
Drill
U-Drill
Tap
End Mill
StraightMill Holder
Milling Collet
Tapping Collet
AngularMill Holder
Plug
E200MAE200MC
Right/Left
Single
Ø32
Ø40
Standard
Standard
Ø8 (5/16″)
Ø10 (3/8″)
Ø12 (1/2″)
Ø16 (5/8″)
Ø20 (3/4″)
MT 1 × MT 2
MT 2
O.D Holder
Facing Holder
I.D Holder
U-Dril Holder
Straight Mill Holder
Angular Mill Holder
Boring
Drill
ER Collet
Turning Holder
Driven Holder
Boring Holder
Socket
ITEM E200MA E200MC
4 4
1 1
3 3
- -
- -
1 1
1 1
1 1
1 1
1 1
1 1
1 1
- -
- -
Opt Opt
Tooling Parts Detail
Specifications are subject to change for improvement without notice.
unit : mm(in)Interference
ø160
(6.3
)
ø95
(3.7
) ø155(6.1)
ø155(6.1)
ø97(3.8)
ø150(5.9)
ø142(5.6)ø95(3.82)
ø520
(20.5)ø579
(22.8)
ø165(6.5)
ø210(8.27)
ø32
(1.26)ø40
(1.57)ø3
50(1
3.8)
E200A/PAE200C/PC
E200MAE200MC
22+
23
E2
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
SPECIFICATIONS
unit : mm(in)Tooling Travel Range
SPECIFICATIONS
20 (0.8
)
35 (3.4
)
7(0.3)
33.2(1.3)
25(1)
91(3.6)
32(1.2)
33.2(1.3)
91(3.6)
32(1.2)
Ø16
9(6"
)
20 (0.8
)19
0(7.
5)
210(
8.2)
(X-a
xis
st.)
20 (0.8
)19
0(7.
5)
210(
8.2)
(X-a
xis
st.)
91(3.6)
330(13) (Max. Turning Length)
80(3.1)
93(3.6)
Ø32
80(3.1)
104(
4)
35 (3.4
)
7(0.3)
25(1)
20 (0.8
)19
0(7.
5)
210(
8.2)
(X-a
xis
st.)
112(4.4)
53 (2.1
)15
7(6.
2)
210(
8.2)
(X-a
xis
st.)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
20 (0.8
)19
0(7.
5)
210(
8.2)
(X-a
xis
st.)
25 (1)
20 (0.8
)
25(1)
55(2.2)
114(4.5)
53 (2.1
)15
7(6.
2)
210(
8.2)
(X-a
xis
st.)
68 (2.7
)
Ø40
(1.6
)
90(3.5)
124(
4.9)
33.2(1.3)
91(3.6)
32(1.2)
Ø16
9(6"
)
5(0
.2)
205(
8)
210(
8.2)
(X-a
xis
st.)
76 286(11.2) (Z-axis st.)
437(17.2) (spindle-disk)
Ø16
9(6"
)
65(2
.7)
145(
5.7)
210(
8.2)
(X-a
xis
st.)
91(3.6) 286(11.2) (Z-axis st.)
286(11.2)(Max. Turning Length)
437(17.2) (spindle-disk)
286(11.2) (Z-axis st.)
437(17.2) (spindle-disk)
286(11.2) (Z-axis st.)
437(17.2) (spindle-disk)
33.2(1.3)
91(3.6)
32(1.2)
Ø16
9(6"
)
33.2(1.3)
91(3.6)
32(1.2)
Ø16
9(6"
)
33.2(1.3)
91(3.6)
32(1.2)
35(1.4)29(1.1)
65(2.5)27(1)
44 (1.7
)20 (0.8
)
35(1.4)29(1.1)
65(2.5)27(1)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
11 (0.4
)8
(0.3
)
5(0
.2)
205(
8)21
0(8.
2) (X
-axi
s st
.)
65(2.5)
29 (1.1
)18
1(7.
1)21
0(8.
2) (X
-axi
s st
.)
81(3.2) 286(11.2) (Z-axis st.)
437(17.2) (spindle-disk)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
51 (2)
159(
6.2)
210(
8.2)
(X-a
xis
st.)
56(2.2)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
6514
521
0(8.
2) (X
-axi
s st
.)
112(4.4)
458(18) (spindle-disk)
35(1.4)29(1.1)
65(2.5)27(1)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
97(3.8)
286(11.2) (Z-axis st.)
458(18) (spindle-disk)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
286(11.2) (Z-axis st.)
458(18) (spindle-disk)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
520
5
210(
X-a
xis
st.) 35(1.4)29
(1.1)65(2.5)27
(1)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
86(3.3)
520
521
0(X
-axi
s st
.)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
102(4)
2918
121
0(X
-axi
s st
.)
44 (1.7
)20 (0.8
)
11 (0.4
)8
35(1.4)29(1.1)
65(2.5)27(1)
77(3)
5115
921
0(X
-axi
s st
.)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
Ø16
9(6"
)
33.2(1.3)
91(3.6)
32(1.2)
88(3.4) 80(3.1) 160(6.3) 120.8(4.7(Quill st.) (Tail Stock st.)
Face Tool holder Face Tool holder
Tail Stock Tail Stock
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
54.2(2.1)
80(3.1) 160(6.3) 120.8(4.7)
(Quill st.) (Tail Stock st.)
Ø16
9(6"
)
33.2(1.3)
91(3.6)
32(1.2)
88(3.4) 80(3.1) 160(6.3) 120.8(4.7(Quill st.) (Tail Stock st.)
Tail Stock
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
54.2(2.1)
80(3.1) 160(6.3) 120.8(4.7)
(Quill st.) (Tail Stock st.)
428(16.8) (spindle-disk)408(16) (PA)
330(13) (Z-axis st.)310(12.2) (PA)
310(12.2) (PA)
35 (3.4
)
7(0.3)
33.2(1.3)
25(1)
91(3.6)
32(1.2)
Ø16
9(6"
)
20 (0.8
)19
0(7.
5)
210(
8.2)
(X-a
xis
st.)
91(3.6)
330(13) (Max. Turning Length)
428(16.8) (spindle-disk)408(16) (PA)
330(13) (Z-axis st.)310(12.2) (PA)
310(12.2) (PA)
428(16.8) (spindle-disk)408(16) (PA)
330(13) (Z-axis st.)310(12.2) (PA)
33.2(1.3)
91(3.6)
32(1.2)
20 (0.8
)19
0(7.
5)
210(
8.2)
(X-a
xis
st.)
93(3.6)
Ø32
(1.2
)
428(16.8) (spindle-disk)408(16) (PA)
330(13) (Z-axis st.)310(12.2) (PA)
449(17.6) (spindle-disk)429(16.8) (PC)
330(13) (Z-axis st.)310(12.2) (PC)
449(17.6) (spindle-disk)429(16.8) (PC)
330(13) (Z-axis st.)310(12.2) (PC)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
114(4.5)
68 (2.7
)
Ø40
(1.6
)
449(17.6) (spindle-disk)429(16.8) (PC)
330(13) (Z-axis st.)310(12.2) (PC)
330(13) (Max. Turning Length)310(12.2) (PC)
35 (3.4
)
7(0.3)
25(1)
112(4.4)
40.1(1.5)
112(4.4)
39(1.5)
449(17.6) (spindle-disk)429(16.8) (PC)
330(13) (Z-axis st.)310(12.2) (PC)
330(13) (Max. Turning Length)310(12.2) (PC)
Ø16
9(6"
)
33.2(1.3)
91(3.6)
32(1.2)
286(11.2) (Z-axis st.)
458(18) (spindle-disk)
286(11.2) (Z-axis st.)
458(18) (spindle-disk)
286(11.2) (Z-axis st.)
286(11.2)(Max. Turning Length)
O.D. Tool holder
I.D. Tool holder I.D. Tool holder (with Tail Stock)
O.D. Tool holder (with Tail Stock)
Tail Stock
O.D. Tool holder (with Tail Stock)
I.D. Tool holder (with Tail Stock)
O.D. Tool holder
I.D. Tool holder
O.D. Tool holder (with Tail Stock) I.D. Tool holder (with Tail Stock) O.D. Tool holder (with Tail Stock) I.D. Tool holder (with Tail Stock)
Straight Milling Head (with Tail Stock)Angular Milling Head (with Tail Stock)Straight Milling Head (with Tail Stock)Angular Milling Head (with Tail Stock)
E200A/PA
E200C/PC
20 (0.8
)
35 (3.4
)
7(0.3)
33.2(1.3)
25(1)
91(3.6)
32(1.2)
33.2(1.3)
91(3.6)
32(1.2)
Ø16
9(6"
)
20 (0.8
)19
0(7.
5)
210(
8.2)
(X-a
xis
st.)
20 (0.8
)19
0(7.
5)
210(
8.2)
(X-a
xis
st.)
91(3.6)
330(13) (Max. Turning Length)
80(3.1)
93(3.6)
Ø32
80(3.1)
104(
4)
35 (3.4
)
7(0.3)
25(1)
20 (0.8
)19
0(7.
5)
210(
8.2)
(X-a
xis
st.)
112(4.4)
53 (2.1
)15
7(6.
2)
210(
8.2)
(X-a
xis
st.)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
20 (0.8
)19
0(7.
5)
210(
8.2)
(X-a
xis
st.)
25 (1)
20 (0.8
)
25(1)
55(2.2)
114(4.5)
53 (2.1
)15
7(6.
2)
210(
8.2)
(X-a
xis
st.)
68 (2.7
)
Ø40
(1.6
)
90(3.5)
124(
4.9)
33.2(1.3)
91(3.6)
32(1.2)
Ø16
9(6"
)
5(0
.2)
205(
8)
210(
8.2)
(X-a
xis
st.)
76 286(11.2) (Z-axis st.)
437(17.2) (spindle-disk)
Ø16
9(6"
)
65(2
.7)
145(
5.7)
210(
8.2)
(X-a
xis
st.)
91(3.6) 286(11.2) (Z-axis st.)
286(11.2)(Max. Turning Length)
437(17.2) (spindle-disk)
286(11.2) (Z-axis st.)
437(17.2) (spindle-disk)
286(11.2) (Z-axis st.)
437(17.2) (spindle-disk)
33.2(1.3)
91(3.6)
32(1.2)
Ø16
9(6"
)
33.2(1.3)
91(3.6)
32(1.2)
Ø16
9(6"
)
33.2(1.3)
91(3.6)
32(1.2)
35(1.4)29(1.1)
65(2.5)27(1)
44 (1.7
)20 (0.8
)
35(1.4)29(1.1)
65(2.5)27(1)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
11 (0.4
)8
(0.3
)
5(0
.2)
205(
8)21
0(8.
2) (X
-axi
s st
.)
65(2.5)
29 (1.1
)18
1(7.
1)21
0(8.
2) (X
-axi
s st
.)
81(3.2) 286(11.2) (Z-axis st.)
437(17.2) (spindle-disk)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
51 (2)
159(
6.2)
210(
8.2)
(X-a
xis
st.)
56(2.2)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
6514
521
0(8.
2) (X
-axi
s st
.)
112(4.4)
458(18) (spindle-disk)
35(1.4)29(1.1)
65(2.5)27(1)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
97(3.8)
286(11.2) (Z-axis st.)
458(18) (spindle-disk)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
286(11.2) (Z-axis st.)
458(18) (spindle-disk)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
520
5
210(
X-a
xis
st.) 35(1.4)29
(1.1)65(2.5)27
(1)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
86(3.3)
520
521
0(X
-axi
s st
.)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
102(4)
2918
121
0(X
-axi
s st
.)
44 (1.7
)20 (0.8
)
11 (0.4
)8
35(1.4)29(1.1)
65(2.5)27(1)
77(3)
5115
921
0(X
-axi
s st
.)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
Ø16
9(6"
)
33.2(1.3)
91(3.6)
32(1.2)
88(3.4) 80(3.1) 160(6.3) 120.8(4.7(Quill st.) (Tail Stock st.)
Face Tool holder Face Tool holder
Tail Stock Tail Stock
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
54.2(2.1)
80(3.1) 160(6.3) 120.8(4.7)
(Quill st.) (Tail Stock st.)
Ø16
9(6"
)
33.2(1.3)
91(3.6)
32(1.2)
88(3.4) 80(3.1) 160(6.3) 120.8(4.7(Quill st.) (Tail Stock st.)
Tail Stock
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
54.2(2.1)
80(3.1) 160(6.3) 120.8(4.7)
(Quill st.) (Tail Stock st.)
428(16.8) (spindle-disk)408(16) (PA)
330(13) (Z-axis st.)310(12.2) (PA)
310(12.2) (PA)
35 (3.4
)
7(0.3)
33.2(1.3)
25(1)
91(3.6)
32(1.2)
Ø16
9(6"
)
20 (0.8
)19
0(7.
5)
210(
8.2)
(X-a
xis
st.)
91(3.6)
330(13) (Max. Turning Length)
428(16.8) (spindle-disk)408(16) (PA)
330(13) (Z-axis st.)310(12.2) (PA)
310(12.2) (PA)
428(16.8) (spindle-disk)408(16) (PA)
330(13) (Z-axis st.)310(12.2) (PA)
33.2(1.3)
91(3.6)
32(1.2)
20 (0.8
)19
0(7.
5)
210(
8.2)
(X-a
xis
st.)
93(3.6)
Ø32
(1.2
)
428(16.8) (spindle-disk)408(16) (PA)
330(13) (Z-axis st.)310(12.2) (PA)
449(17.6) (spindle-disk)429(16.8) (PC)
330(13) (Z-axis st.)310(12.2) (PC)
449(17.6) (spindle-disk)429(16.8) (PC)
330(13) (Z-axis st.)310(12.2) (PC)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
114(4.5)
68 (2.7
)
Ø40
(1.6
)
449(17.6) (spindle-disk)429(16.8) (PC)
330(13) (Z-axis st.)310(12.2) (PC)
330(13) (Max. Turning Length)310(12.2) (PC)
35 (3.4
)
7(0.3)
25(1)
112(4.4)
40.1(1.5)
112(4.4)
39(1.5)
449(17.6) (spindle-disk)429(16.8) (PC)
330(13) (Z-axis st.)310(12.2) (PC)
330(13) (Max. Turning Length)310(12.2) (PC)
Ø16
9(6"
)
33.2(1.3)
91(3.6)
32(1.2)
286(11.2) (Z-axis st.)
458(18) (spindle-disk)
286(11.2) (Z-axis st.)
458(18) (spindle-disk)
286(11.2) (Z-axis st.)
286(11.2)(Max. Turning Length)
O.D. Tool holder
I.D. Tool holder I.D. Tool holder (with Tail Stock)
O.D. Tool holder (with Tail Stock)
Tail Stock
O.D. Tool holder (with Tail Stock)
I.D. Tool holder (with Tail Stock)
O.D. Tool holder
I.D. Tool holder
O.D. Tool holder (with Tail Stock) I.D. Tool holder (with Tail Stock) O.D. Tool holder (with Tail Stock) I.D. Tool holder (with Tail Stock)
Straight Milling Head (with Tail Stock)Angular Milling Head (with Tail Stock)Straight Milling Head (with Tail Stock)Angular Milling Head (with Tail Stock)
unit : mm(in)Tooling Travel Range
SPECIFICATIONS
24+
25
E2
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
20 (0.8
)
35 (3.4
)
7(0.3)
33.2(1.3)
25(1)
91(3.6)
32(1.2)
33.2(1.3)
91(3.6)
32(1.2)
Ø16
9(6"
)
20 (0.8
)19
0(7.
5)
210(
8.2)
(X-a
xis
st.)
20 (0.8
)19
0(7.
5)
210(
8.2)
(X-a
xis
st.)
91(3.6)
330(13) (Max. Turning Length)
80(3.1)
93(3.6)
Ø32
80(3.1)
104(
4)
35 (3.4
)
7(0.3)
25(1)
20 (0.8
)19
0(7.
5)
210(
8.2)
(X-a
xis
st.)
112(4.4)
53 (2.1
)15
7(6.
2)
210(
8.2)
(X-a
xis
st.)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
20 (0.8
)19
0(7.
5)
210(
8.2)
(X-a
xis
st.)
25 (1)
20 (0.8
)
25(1)
55(2.2)
114(4.5)
53 (2.1
)15
7(6.
2)
210(
8.2)
(X-a
xis
st.)
68 (2.7
)
Ø40
(1.6
)
90(3.5)
124(
4.9)
33.2(1.3)
91(3.6)
32(1.2)
Ø16
9(6"
)
5(0
.2)
205(
8)
210(
8.2)
(X-a
xis
st.)
76 286(11.2) (Z-axis st.)
437(17.2) (spindle-disk)
Ø16
9(6"
)
65(2
.7)
145(
5.7)
210(
8.2)
(X-a
xis
st.)
91(3.6) 286(11.2) (Z-axis st.)
286(11.2)(Max. Turning Length)
437(17.2) (spindle-disk)
286(11.2) (Z-axis st.)
437(17.2) (spindle-disk)
286(11.2) (Z-axis st.)
437(17.2) (spindle-disk)
33.2(1.3)
91(3.6)
32(1.2)
Ø16
9(6"
)
33.2(1.3)
91(3.6)
32(1.2)
Ø16
9(6"
)
33.2(1.3)
91(3.6)
32(1.2)
35(1.4)29(1.1)
65(2.5)27(1)
44 (1.7
)20 (0.8
)
35(1.4)29(1.1)
65(2.5)27(1)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
11 (0.4
)8
(0.3
)
5(0
.2)
205(
8)21
0(8.
2) (X
-axi
s st
.)
65(2.5)
29 (1.1
)18
1(7.
1)21
0(8.
2) (X
-axi
s st
.)
81(3.2) 286(11.2) (Z-axis st.)
437(17.2) (spindle-disk)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
51 (2)
159(
6.2)
210(
8.2)
(X-a
xis
st.)
56(2.2)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
6514
521
0(8.
2) (X
-axi
s st
.)
112(4.4)
458(18) (spindle-disk)
35(1.4)29(1.1)
65(2.5)27(1)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
97(3.8)
286(11.2) (Z-axis st.)
458(18) (spindle-disk)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
286(11.2) (Z-axis st.)
458(18) (spindle-disk)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
520
5
210(
X-a
xis
st.) 35(1.4)29
(1.1)65(2.5)27
(1)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
86(3.3)
520
521
0(X
-axi
s st
.)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
102(4)
2918
121
0(X
-axi
s st
.)
44 (1.7
)20 (0.8
)
11 (0.4
)8
35(1.4)29(1.1)
65(2.5)27(1)
77(3)
5115
921
0(X
-axi
s st
.)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
Ø16
9(6"
)
33.2(1.3)
91(3.6)
32(1.2)
88(3.4) 80(3.1) 160(6.3) 120.8(4.7(Quill st.) (Tail Stock st.)
Face Tool holder Face Tool holder
Tail Stock Tail Stock
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
54.2(2.1)
80(3.1) 160(6.3) 120.8(4.7)
(Quill st.) (Tail Stock st.)
Ø16
9(6"
)
33.2(1.3)
91(3.6)
32(1.2)
88(3.4) 80(3.1) 160(6.3) 120.8(4.7(Quill st.) (Tail Stock st.)
Tail Stock
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
54.2(2.1)
80(3.1) 160(6.3) 120.8(4.7)
(Quill st.) (Tail Stock st.)
428(16.8) (spindle-disk)408(16) (PA)
330(13) (Z-axis st.)310(12.2) (PA)
310(12.2) (PA)
35 (3.4
)
7(0.3)
33.2(1.3)
25(1)
91(3.6)
32(1.2)
Ø16
9(6"
)
20 (0.8
)19
0(7.
5)
210(
8.2)
(X-a
xis
st.)
91(3.6)
330(13) (Max. Turning Length)
428(16.8) (spindle-disk)408(16) (PA)
330(13) (Z-axis st.)310(12.2) (PA)
310(12.2) (PA)
428(16.8) (spindle-disk)408(16) (PA)
330(13) (Z-axis st.)310(12.2) (PA)
33.2(1.3)
91(3.6)
32(1.2)
20 (0.8
)19
0(7.
5)
210(
8.2)
(X-a
xis
st.)
93(3.6)
Ø32
(1.2
)
428(16.8) (spindle-disk)408(16) (PA)
330(13) (Z-axis st.)310(12.2) (PA)
449(17.6) (spindle-disk)429(16.8) (PC)
330(13) (Z-axis st.)310(12.2) (PC)
449(17.6) (spindle-disk)429(16.8) (PC)
330(13) (Z-axis st.)310(12.2) (PC)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
114(4.5)
68 (2.7
)
Ø40
(1.6
)
449(17.6) (spindle-disk)429(16.8) (PC)
330(13) (Z-axis st.)310(12.2) (PC)
330(13) (Max. Turning Length)310(12.2) (PC)
35 (3.4
)
7(0.3)
25(1)
112(4.4)
40.1(1.5)
112(4.4)
39(1.5)
449(17.6) (spindle-disk)429(16.8) (PC)
330(13) (Z-axis st.)310(12.2) (PC)
330(13) (Max. Turning Length)310(12.2) (PC)
Ø16
9(6"
)
33.2(1.3)
91(3.6)
32(1.2)
286(11.2) (Z-axis st.)
458(18) (spindle-disk)
286(11.2) (Z-axis st.)
458(18) (spindle-disk)
286(11.2) (Z-axis st.)
286(11.2)(Max. Turning Length)
O.D. Tool holder
I.D. Tool holder I.D. Tool holder (with Tail Stock)
O.D. Tool holder (with Tail Stock)
Tail Stock
O.D. Tool holder (with Tail Stock)
I.D. Tool holder (with Tail Stock)
O.D. Tool holder
I.D. Tool holder
O.D. Tool holder (with Tail Stock) I.D. Tool holder (with Tail Stock) O.D. Tool holder (with Tail Stock) I.D. Tool holder (with Tail Stock)
Straight Milling Head (with Tail Stock)Angular Milling Head (with Tail Stock)Straight Milling Head (with Tail Stock)Angular Milling Head (with Tail Stock)
E200MA
unit : mm(in)Tooling Travel Range
SPECIFICATIONS
20 (0.8
)
35 (3.4
)
7(0.3)
33.2(1.3)
25(1)
91(3.6)
32(1.2)
33.2(1.3)
91(3.6)
32(1.2)
Ø16
9(6"
)
20 (0.8
)19
0(7.
5)
210(
8.2)
(X-a
xis
st.)
20 (0.8
)19
0(7.
5)
210(
8.2)
(X-a
xis
st.)
91(3.6)
330(13) (Max. Turning Length)
80(3.1)
93(3.6)
Ø32
80(3.1)
104(
4)
35 (3.4
)
7(0.3)
25(1)
20 (0.8
)19
0(7.
5)
210(
8.2)
(X-a
xis
st.)
112(4.4)
53 (2.1
)15
7(6.
2)
210(
8.2)
(X-a
xis
st.)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
20 (0.8
)19
0(7.
5)
210(
8.2)
(X-a
xis
st.)
25 (1)
20 (0.8
)
25(1)
55(2.2)
114(4.5)
53 (2.1
)15
7(6.
2)
210(
8.2)
(X-a
xis
st.)
68 (2.7
)
Ø40
(1.6
)
90(3.5)
124(
4.9)
33.2(1.3)
91(3.6)
32(1.2)
Ø16
9(6"
)
5(0
.2)
205(
8)
210(
8.2)
(X-a
xis
st.)
76 286(11.2) (Z-axis st.)
437(17.2) (spindle-disk)
Ø16
9(6"
)
65(2
.7)
145(
5.7)
210(
8.2)
(X-a
xis
st.)
91(3.6) 286(11.2) (Z-axis st.)
286(11.2)(Max. Turning Length)
437(17.2) (spindle-disk)
286(11.2) (Z-axis st.)
437(17.2) (spindle-disk)
286(11.2) (Z-axis st.)
437(17.2) (spindle-disk)
33.2(1.3)
91(3.6)
32(1.2)
Ø16
9(6"
)
33.2(1.3)
91(3.6)
32(1.2)
Ø16
9(6"
)
33.2(1.3)
91(3.6)
32(1.2)
35(1.4)29(1.1)
65(2.5)27(1)
44 (1.7
)20 (0.8
)
35(1.4)29(1.1)
65(2.5)27(1)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
11 (0.4
)8
(0.3
)
5(0
.2)
205(
8)21
0(8.
2) (X
-axi
s st
.)
65(2.5)
29 (1.1
)18
1(7.
1)21
0(8.
2) (X
-axi
s st
.)
81(3.2) 286(11.2) (Z-axis st.)
437(17.2) (spindle-disk)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
51 (2)
159(
6.2)
210(
8.2)
(X-a
xis
st.)
56(2.2)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
6514
521
0(8.
2) (X
-axi
s st
.)
112(4.4)
458(18) (spindle-disk)
35(1.4)29(1.1)
65(2.5)27(1)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
97(3.8)
286(11.2) (Z-axis st.)
458(18) (spindle-disk)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
286(11.2) (Z-axis st.)
458(18) (spindle-disk)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
520
5
210(
X-a
xis
st.) 35(1.4)29
(1.1)65(2.5)27
(1)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
86(3.3)
520
521
0(X
-axi
s st
.)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
102(4)
2918
121
0(X
-axi
s st
.)
44 (1.7
)20 (0.8
)
11 (0.4
)8
35(1.4)29(1.1)
65(2.5)27(1)
77(3)
5115
921
0(X
-axi
s st
.)
44 (1.7
)20 (0.8
)
11 (0.4
)8
(0.3
)
35(1.4)29(1.1)
65(2.5)27(1)
Ø16
9(6"
)
33.2(1.3)
91(3.6)
32(1.2)
88(3.4) 80(3.1) 160(6.3) 120.8(4.7(Quill st.) (Tail Stock st.)
Face Tool holder Face Tool holder
Tail Stock Tail Stock
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
54.2(2.1)
80(3.1) 160(6.3) 120.8(4.7)
(Quill st.) (Tail Stock st.)
Ø16
9(6"
)
33.2(1.3)
91(3.6)
32(1.2)
88(3.4) 80(3.1) 160(6.3) 120.8(4.7(Quill st.) (Tail Stock st.)
Tail Stock
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
54.2(2.1)
80(3.1) 160(6.3) 120.8(4.7)
(Quill st.) (Tail Stock st.)
428(16.8) (spindle-disk)408(16) (PA)
330(13) (Z-axis st.)310(12.2) (PA)
310(12.2) (PA)
35 (3.4
)
7(0.3)
33.2(1.3)
25(1)
91(3.6)
32(1.2)
Ø16
9(6"
)
20 (0.8
)19
0(7.
5)
210(
8.2)
(X-a
xis
st.)
91(3.6)
330(13) (Max. Turning Length)
428(16.8) (spindle-disk)408(16) (PA)
330(13) (Z-axis st.)310(12.2) (PA)
310(12.2) (PA)
428(16.8) (spindle-disk)408(16) (PA)
330(13) (Z-axis st.)310(12.2) (PA)
33.2(1.3)
91(3.6)
32(1.2)
20 (0.8
)19
0(7.
5)
210(
8.2)
(X-a
xis
st.)
93(3.6)
Ø32
(1.2
)
428(16.8) (spindle-disk)408(16) (PA)
330(13) (Z-axis st.)310(12.2) (PA)
449(17.6) (spindle-disk)429(16.8) (PC)
330(13) (Z-axis st.)310(12.2) (PC)
449(17.6) (spindle-disk)429(16.8) (PC)
330(13) (Z-axis st.)310(12.2) (PC)
Ø21
0(8"
)
40.1(1.5)
112(4.4)
39(1.5)
114(4.5)
68 (2.7
)
Ø40
(1.6
)
449(17.6) (spindle-disk)429(16.8) (PC)
330(13) (Z-axis st.)310(12.2) (PC)
330(13) (Max. Turning Length)310(12.2) (PC)
35 (3.4
)
7(0.3)
25(1)
112(4.4)
40.1(1.5)
112(4.4)
39(1.5)
449(17.6) (spindle-disk)429(16.8) (PC)
330(13) (Z-axis st.)310(12.2) (PC)
330(13) (Max. Turning Length)310(12.2) (PC)
Ø16
9(6"
)
33.2(1.3)
91(3.6)
32(1.2)
286(11.2) (Z-axis st.)
458(18) (spindle-disk)
286(11.2) (Z-axis st.)
458(18) (spindle-disk)
286(11.2) (Z-axis st.)
286(11.2)(Max. Turning Length)
O.D. Tool holder
I.D. Tool holder I.D. Tool holder (with Tail Stock)
O.D. Tool holder (with Tail Stock)
Tail Stock
O.D. Tool holder (with Tail Stock)
I.D. Tool holder (with Tail Stock)
O.D. Tool holder
I.D. Tool holder
O.D. Tool holder (with Tail Stock) I.D. Tool holder (with Tail Stock) O.D. Tool holder (with Tail Stock) I.D. Tool holder (with Tail Stock)
Straight Milling Head (with Tail Stock)Angular Milling Head (with Tail Stock)Straight Milling Head (with Tail Stock)Angular Milling Head (with Tail Stock)
E200C
unit : mm(in)Tooling Travel Range
SPECIFICATIONS
26+
27
E2
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
Swing Over the Bed
Swing Over the Carriage
Max. Turning Dia.
Max. Turning Length
Bar Capacity
Chuck Size
Spindle Bore
Spindle Speed (rpm)
Motor (Max/Cont.)
Torque (Max/Cont.)
Spindle Type
Spindle Nose
C-axis Indexing
Travel (X/Z/B)
Rapid Travel (X/Z/B)
Slide Type
No. of Tool
Tool Size OD
ID
Indexing Time
Motor (Max/Cont.)
Milling Tool Speed (rpm)
Torque (Max/Cont.)
Collet Size
Type
Taper
Quill Dia.
Quill Travel
Travel
Coolant Tank
Lubricating Tank
Electric Power Supply
Thickness of Power Cable
Voltage
Floor Space (L×W)
Height
Weight
Controller
CAPACITY
FEED
TANkCAPACITY
SPINDlE
TURRET
lIvE TOOl
TAIlSTOCk
MACHINE
NC
POWERSUPPlY
mm(in)
mm(in)
mm(in)
mm(in)
mm(in)
mm(in)
mm(in)
r/min
kW(HP)
N.m
-
-
deg
mm(in)
m/min
-
EA
mm(in)
mm(in)
sec/step
kW(HP)
r/min
N.m
mm(in)
-
-
mm(in)
mm(in)
mm(in)
ℓ(gel)
ℓ(gel)
kVA
Sq
V/Hz
mm(in)
mm(in)
kg(lb)
-
Specifications are subject to change for improvement without notice.
ITEM E200MAE200A E200PA
Ø550 (21.7″)
Ø350 (13.8″)
Ø350 (13.8″) Ø290 (11.4″) Ø350 (13.8″)
300 (11.8″) 255 (10″) 280 (11″)
Ø45 (1.8″)
Ø169 (6.7″)
Ø53 (2.1″)
6,000 [6,000] 6,000
15/11(20/15)[10.8/9(14.4/12)] 7.5/5.5 (10/7.4) 15/11 (20/15)
95.6/52.5 [75.6/68.7] 62/45.5 95.6/52.5
BELT
A2-5
- 0.001˚ -
210/330(8.3″/13″) 210/286(8.3″/11.3″) 210/310(8.3″/12.2″)
36/36 24/24
LM GUIDE BOX GUIDE
12
□25 (1″) □20 (0.8″) □25 (1″)
Ø32 (1.3″)
0.12 0.23 0.12
- 7.6/3 (10/4) -
- 4,500 -
- 35/12 -
- Ø16 (0.6″) ER25 -
- VDI30 -
MT4
Ø65 (2.56″)
80 (3.15″)
160 (6.3″)
135 (35.7)
1.8 (0.48)
17
OVER 16
220/60 (200/50)
2,020×1,763 (79.5″×69.4″)
1,820 (71.7″)
3,800 (8,378)
HYUNDAI WIA FANUC i Series [E200A : SIEMENS 828D BASIC]
Specifications [ ] : Option
SPECIFICATIONS
Specifications are subject to change for improvement without notice.
Swing Over the Bed
Swing Over the Carriage
Max. Turning Dia.
Max. Turning Length
Bar Capacity
Chuck Size
Spindle Bore
Spindle Speed (rpm)
Motor (Max/Cont.)
Torque (Max/Cont.)
Spindle Type
Spindle Nose
C-axis Indexing
Travel (X/Z/B)
Rapid Travel (X/Z/B)
Slide Type
No. of Tool
Tool Size OD
ID
Indexing Time
Motor (Max/Cont.)
Milling Tool Speed (rpm)
Torque (Max/Cont.)
Collet Size
Type
Taper
Quill Dia.
Quill Travel
Travel
Coolant Tank
Lubricating Tank
Electric Power Supply
Thickness of Power Cable
Voltage
Floor Space (L×W)
Height
Weight
Controller
CAPACITY
FEED
TANkCAPACITY
SPINDlE
TURRET
lIvE TOOl
TAIlSTOCk
MACHINE
NC
POWERSUPPlY
mm(in)
mm(in)
mm(in)
mm(in)
mm(in)
mm(in)
mm(in)
r/min
kW(HP)
N.m
-
-
deg
mm(in)
m/min
-
EA
mm(in)
mm(in)
sec/step
kW(HP)
r/min
N.m
mm(in)
-
-
mm(in)
mm(in)
mm(in)
ℓ(gel)
ℓ(gel)
kVA
Sq
V/Hz
mm(in)
mm(in)
kg(lb)
-
ITEM E200MCE200C E200PC
Ø550 (21.7″)
Ø350 (13.8″)
Ø350 (13.8″) Ø290 (11.4″) Ø350 (13.8″)
300 (11.8″) 255 (10″) 280 (11″)
Ø65 (2.56″)
Ø210 (8.3″)
Ø78 (3.1″)
4,000 [6,000] 4,000
15/11(20/15)[10.8/9(14.4/12)] 11/7.5 (10/7.4) 15/11 (20/15)
167/92 [132.3/110.3] 105/71.6 167/92
BELT
A2-5
- 0.001˚ -
210/330(8.3″/13″) 210/286(8.3″/11.3″) 210/310(8.3″/12.2″)
36/36 24/24
LM GUIDE BOX GUIDE
12
□25 (1″) □20 (0.8″) □25 (1″)
Ø40 (1.6″) Ø32 (1.3″) Ø40 (1.6″)
0.12 0.23 0.12
- 7.6/3 (10/4) -
- 4,500 -
- 35/12 -
- Ø16 (0.6″) ER25 -
- VDI30 -
MT4
Ø65 (2.56″)
80 (3.15″)
160 (6.3″)
135 (35.7)
1.8 (0.48)
17
OVER 16
220/60 (200/50)
2,050×1,763 (80.7″×69.4″)
1,820 (71.7″)
3,900 (8,598)
HYUNDAI WIA FANUC i Series [E200C : SIEMENS 828D BASIC]
Specifications [ ] : Option
SPECIFICATIONS
28+
29
E2
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
SIEMENS 828D BASICControl functionMax. configuration of axisMax. configuration of axis and sp.Least Command/inputFeed functionFeedrate OverrideRapid Traverse OverrideAcceleration with jerk limitationProgrammable accelerationFollow-upmodeMeasuring system 1 and 2, selectableSeparate path feed for corners and chamfersTravel to fixed stopSpindle functionSpindle OverrideSpindle OrientationSpindle Speed LimitationRigid TappingInterpolation functionLinear interpolation axisCircle via center point and end pointCircle via interpolation pointHelical interpolationUniversal interpolator NURBS (non-uniform rational B splines)Continuous-path mode with programmable rounding clearanceTool functionTool Radius Comp.Zero Offset (G54, G55, G56, G57 ,G58, G59)Programmable Zero OffsetTool managementDisplayCRT / MDIScreen SaverManual OperationManual Handle/Jog FeedRepositionReference ApproachSpindle ControlAuto OperationSingle BlockFeed HoldOptional Block SkipMachine LockDry RunSimulationDiagnosis functionAlarm DisplaySpindle Load/rpm MeterPLC status/LAD displayProgram functionPart Program Storage LengthProgram NameSubroutine CallAbsolute/incremental CommandScaling, ROTInch / Metric ConversionConversational Cycle ProgramBlock SearchVariable Program (Macro)Read / Write System VariableBackGround EditingMiscellaneous FunctionsLable SkipProgram Stop/EndLookahead , Jerk LimitationFeed &forward controlISO Dialect Interpreter(G291) (Fanuc Program exe)Maximum number of tools/cuttingsNumber of levels for skip blocks 1
3 Axis5 Axis0.0001mm / 0.00001inch
0 - 120%F1, 5, 25/50, 100%
50% - 120%
Max. 4axis
50EA
8.4˝ Color LCD
Ref 1, 2 ApproachStart, Stop, Rev, Jog, Ort.
(2 dimensional)
1MB23 digit (7 level) G90 - G91
(22 Machine)
M - Code
M00, M01, M02, M30
80/160
Protection FunctionEmergency StopOver TravelContour MonitoringProgram ProtectionAutomation Support Fun.Actual Speed Display(Monitor)Tool Life ManagementWork Count Functionlanguage Function
Two Language switchable
Data TransferRS 232C I/F / EthernetUSB Memory Stick & CF Card
OptionShop Turn3D SimulationDRF offsetTeach -inNumber of levels for skip blocks 8TRACYL (Cylinder interpolation)TRANSMIT (Pole coordinate command)Sister ToolA,B,C Spline InterpolationRCS Host (Remote Control)Simultaneous Recording (real time monitoring)Analysis of Internal Drive ValuesNetwork Drive ManagementHW-TM
Figures in inch are converted from metric values.Design and specifications subject to change without notice.
Soft Limit & Hard O.T
(Time, Parts)(Internal)
Chinese Traditional, Czech, Danish, Dutch, Finnish, Hungarian, Japanese, Korean, Polish, Russian, Swedish, Portuguese, Turkish
CONTROLLER
HYUNDAI WIA FANUC i SeriesControl function / Screen display
Control axis number
Simultaneous control axis number
Min. input unit
Min. increment
High speed HRV controlInch/metric conversionInterlockMachinelockEmergency stopStroke check 1Stroke check 2Stroke check 3Follow upSub offBacklash compensationPosition switchFault load detectionHigh resolution transfer control(HRM) LCD / MDIOperation Auto handling (memory)MDI handlingSearch functionProgram re-startPreventive function for mis-handlingBuffer registrationProgram check functionSingle blockFeed functionManual jog feedManual Handle ScaleFeed commandFeed overrideJog overrideRapid transfer overrideOverride releaseTransfer/minute, Transfer/rpmProgram input and interpolation functionNano interpolationDwell functionThreading retractVariable lead threadingReturn of first zero pointReturn check of zero pointReturn of second zero pointProgram stop/overTape codeOptional block skipMax. program enter unitProgram numberAbsolute, incremental programmingDecimal number enteringPlain selectionWork coordinate selectionManual absoluteDrawing dimension direct input programmingG code systemProgrammable data inputSub program callCustom macro BCustom macro variable additionMultiple repetitive cyclesMultiple repetitive cycles ⅡLathe fixed cycleManual guide i
Max. 4 axisX, Z axisX, Z, C axis (M type machine)2 axis/straight, arc interpolation (Max. 4 axis)X, Z axis : 0.001 mm (0.0001″)C axis : 0.001 degX, Z axis : 0.001 mm (0.0001″)C axis: 0.001 deg
G20 / G21Each axis / All axisFull axis
Over-travel
+/- 0~9999 Pulse (Rapid traverse & cutting feed)
Back spin torque limiter (BST)
8.4″ Color LCD
Sequence, Program
Dry run, Program check
Rapid transfer, Jog, Handlex1, x10, x100Direct command for F code feed0~200% (10% units)0~2,000 mm/min [79 ipm]F1, F5, F25/F50, F100%
Positioning/Straight/Arc (G00/G01/G02/G03)G04, 0~9999.9999 sec
G28, ManualG27G30M00, M01 / M02, M30EIA / ISO1 EA+/- 9999.9999”O+4 digit number
G17, G18, G19G52 to G59“ON” fixedIncluded chamfering / Corner R`A/B/CG1010 Steps
#100 to #199, #500 to #999
Interactive program
Sub / Main spindle functionM-Code functionM-Code function lockLock sp. speed commandMain sp. constant controlSpindle speed overrideSpindle position decisionRigid tappingTool function / Tool compensationTool functionTool offset quantityTool offsetTool nose radius compensationConfiguration/wear compensationDirect input of measuring tool compensation BTool life managementData input, output and editing functionInput/output interfaceMemory card input and outputProgram storing capacityProgram registration quantityMemory lockBackground editAdditional expandable editScreen, diagnosis and setting functionSelf diagnosis functionHistoric screenHelp functionOutside messageOperation time/counter displayActual sp. speed, T code displayActual machining feed rate displayHandling monitor screenGraphic screenSpindle/servo setting screenLanguagesLCD screen saveAuto data backupFunction according with machine specificationCs contouring functionStored pitch error compensationPole coordinate commandCylinder interpolationDrill fixed cycleSp. positioning expandableControlling live tool by servo motor
OptionHigh speed EthernetOptional block skip3rd & 4th reference point returnProgram storing capacityData serverPolygon turningHelical interpolationDynamic graphic display8 level data protection functionTool load monitoring functionManual guide i
Figures in inch are converted from metric values.Design and specifications subject to change without notice.
M4 digit number
S + 4 digit number, binary number outputG96, G9750% ~ 150% (10% unit)
T2 + 264 pairs
G40, G41, G42
RS232C, Memory Card
512 KbyteMax. 500 programs
NC program copy, move, change
Alarm and handling screen
Rod meter light
Selection of random 5 EAScreen saver
Turn millTurn millTurn millTurn millTurn millTurn millTurn mill
100 Mbps (Option board is required)9 EA
512 Kbyte 1GB
HWTM (embedded Fanuc type)Interactive program (10.4″ Color LCD)
30+
31
E2
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L
CONTROLLER
BEIJING OFFICESHENYANG OFFICE
Qingdao OFFICE
Jiangsu HYUNDAI WIA
HYUNDAI WIAMachine Tools Co. LTD
HEADOFFICE
GUANGZHOU OFFICE
WUHAN OFFICECHENGDU OFFICE
HYUNDAI WIA India
HYUNDAI WIA EuropeRaunheim Service Center
■RaunheimServiceCenter ■HYUNDAIWIAEurope ■ChinaBeijingOffice ■ChinaShenyangOffice
■ChinaGuangzhouOffice■HYUNDAIWIAIndia
GLOBAL NETWROK
AMERICA CORP. (Chicago Office)
AMERICA CORP.(L.A Office)
■MachineToolChinaSalesOffice
■JiangsuHYUNDAIWIA
■AmericaCorp.(L.A. office)
■AmericaCorp.(Chicago office)
■HYUNDAIWIAAmericaTechnicalCenter
AmericasHYUNDAIWIAAmerica265, Spring Lake Drive, Itasca, IL, 60143
L.A.office11125 Knott Ave. STE B/C Cypress, CA 90630
HYUNDAIWIAAmericaTechnicalcenter39205 Country Club Drive Suite C-9, Farmington Hills, MI, 48310
EuropeHYUNDAIWIAEuropeKaiserleipromenade 5, 63067 Offenbach, Germany
RaunheimServiceCenterFrankfurter Strasse 51, 65479 Raunheim, Germany
IndiaHYUNDAIWIAIndia48, Sur.No78-80. Kandamangalam Village, Sengadu Post, Sriperumbudur Taluk, Kancheepuram, Tamil Nadu - 602 105
ChinaJiangsuHYUNDAIWIACompany No.6, Fenghuang Road, Fenghuang Town,Zhangjiagang City, Jiangsu Province, China
HYUNDAIWIAMachineToolsCo.LTD1-3F, Bldg6, No.1535 Hongmei Road, Xuhui District,Shanghai, China, 200233
ChinaBeijingOfficeRoom 908, Hyundai Motor Building, No.38 Xiaoyun Road, Chaoyang District, Beijing, China 100027
ChinaGuangzhouOfficeRoom 609, No.1 Yingbin Building (Dashi Section) Panyu District, Guangzhou Ctiy, Guangdong, China 511431
ChinaChengduOfficeRoom 2103, Block A, Times Plaza, No.2 Zongfu Road, Jinjiang District, Chengdu, China 610016
ChinaWuhanOffice Room 302, B Tower, Donghe Center, Dongfeng Three Toad, Zhuankou, Wuhan, Hubei, China
ChinaQingdaoOfficeRoom 1207, Caifu Building, 182-6 Haier Middle Road, Qingdao 266061, China
ChinaShenyangOfficeRoom 1304, No.53 Beizhan Road, Shenhe District,Shenyang China 110013
153, Jeongdong-ro, Seongsan-gu, Changwon, Gyeongnam, Korea
Headquarters
32+
33
E2
00 S
ERIE
SC
nC
Tu
rn
ing
Cen
Ter
HYu
nD
Ai W
iAM
ACH
ine
TOO
L