Date post: | 31-Dec-2015 |
Category: |
Documents |
Upload: | jacob-levine |
View: | 17 times |
Download: | 0 times |
Earthquakes
Describing
EarthquakesIntensity vs. Magnitude
Intensity ScaleIntensity ScaleIntensity Scale- Modified Mercalli Scale -Uses Roman Numerals example: VI or X-The effects of an earthquake are an indication of an earthquakes intensity.
Examples: people awaking, damage to brick and stone structures, and movement of furniture
The scale ranges from I, which corresponds to imperceptible events, up to XII which corresponds to total destruction.
Intensity ScaleIntensity Scale-No mathematical basis for the scale -Ranking based on observed effects-Measure of the actual effects at a certain location-Subjective measure, perceived, based on qualitative descriptions.
Intensity ScaleIntensity Scale
Isoseismal lines identify areas of equal intensity.
Intensity ScaleIntensity ScaleThis is an isoseismal map showing the impact of the Alaska Earthquake of July 9, 1958 .XI on the Modified Mercalli Intensity Scale (Magnitude 7.9)
Intensity ScaleIntensity Scale
Isoseismal map for the earthquake of December 16,1811 New, Madrid Missouri.
In the winter of 1811-12, the central Mississippi Valley was struck by three of the most powerful earthquakes in U.S. history.
Magnitude ScaleMagnitude ScaleRichter scale- Arabic Numerals-Decimals to the tenths placeEx: Earthquake Magnitude 9.2 on the Richter Scale
Earthquake magnitude is a measure of the amplitude of the seismic waves recorded on a seismogram. -Magnitude scales are logarithmic based on powers of 10.-Seismic wave amplitudes increase by 10 times for each unit of the scale.
Magnitude ScaleMagnitude Scale
Magnitude ScaleMagnitude ScaleRichter scale
Ex: a magnitude 6.0 earthquake is 10 times the measured amplitude in a magnitude 5.0 earthquake.
-Quakes less than 3.5 on this scale are generally not felt at the surface but can be detected by seismometers.-Quakes from 3.5 up to 5.5 are felt, but there is little structural damage; above 6.0 damage increases dramatically.
Magnitude ScaleMagnitude Scale
Effects of Local Effects of Local GeologyGeologyThe Mercalli Scale is a measure of the effects of an
earthquake at a particular place and depends not only on strength (magnitude) of a quake, but also the distance from the place of origin and the local geology at the observation point.
A given event will have only one magnitude, but many intensity values, which tend to decrease with distance from the origin, although local conditions can produce anomalies.
Effects of Local Effects of Local GeologyGeologyIntensities are considerably greater over soft soils than
solid rock.Ground shaking- amplitude, duration, and damage increases in poorly consolidated rocks. (all of which increase the intensity)
Effects of Local Effects of Local GeologyGeologyLiquefaction- a geologic process that affects
earthquake intensity-Liquefaction is the temporary change of water saturated soil and sand from solid to liquid state.
Effects of Local Effects of Local GeologyGeologyThe Marina district in San Francisco experienced very
high intensities during the Loma Prieta Earthquake in 1989 (Magnitude 7.1).The earthquake was centered 80 km south of the city.Nearby parts of the city, built on hard bedrock, did not experience intensities as high as the Marina District which was built on wet, unconsolidated, landfill.
Effects of Local Effects of Local GeologyGeology
Effects of Local Effects of Local GeologyGeologyMexico City 1985: 8.0 on the Richter Scale and IX on
the Modified Mercalli Intensity Scale.-Buildings were greatly affected although the epicenter was far away (300km).-Acapulco, which was much closer to the epicenter, suffered less damage because it stands firmly on bedrock.
Effects of Local Effects of Local GeologyGeologyMexico City 1985
Effects of Local Effects of Local GeologyGeologyMexico city is built on a basin filled with weak layers of
volcanic ash, gravel, plus sand and clay deposits from an old lake bed.
Effects of Local Effects of Local GeologyGeology
Effects of Local Effects of Local GeologyGeologyMaterials like soils and sediments, which are much less
rigid than bedrock, respond to the passage of seismic waves with a much greater amplitudes. -In other words, loose, unconsolidated soils will shake much more than solid bedrock.
Earthquake HazardsEarthquake HazardsDirect Hazards (due to ground shaking)•Collapse of buildings & structures
•Broken/fallen power lines (electricity)
•Broken pipelines (water & gas)
•Damage to roads and bridges
Earthquake HazardsEarthquake Hazards
Q ui ckTi me™ and aTI FF (Uncompressed) decompressor
are needed to see thi s pi cture.
Indirect Hazards•Fire: ground motion breaks fuel lines, fuel tanks and power lines.
-Water lines are often broken, reducing the amount of water available to fight fires.
•Landslides: earthquakes trigger the failure of unstable slopes.
•Tsunami: the ocean floor rises or falls suddenly due to an earthquake, generating giant waves as much as 30 meters tall.
Earthquake HazardsEarthquake Hazards
Earthquakes and Plate Earthquakes and Plate TectonicsTectonics
Q ui ckTi me™ and aTI FF (Uncompressed) decompressor
are needed to see thi s pi cture.
Earthquakes are caused by plate interactions along tectonic plate boundaries.Earthquakes occur at each of the three types of plate boundaries: divergent, transform, and convergent.
-At divergent boundaries, tensional forces produce shallow focus quakes
– At transform boundaries, shear forces produce shallow focus quakes
– At convergent boundaries, compressional forces produce shallow- to deep-focus quakes (subduction zones)
Earthquakes and Plate Earthquakes and Plate TectonicsTectonics
Earthquakes and Plate Earthquakes and Plate TectonicsTectonics•80% of all earthquakes occur in the Circum-Pacific belt,
most of these result from convergent boundary activity.• 15% occur in the Mediterranean-Himalayan belt• remaining 5% occur in the interiors of plates and on spreading ridge centers• More than 150,000 quakes strong enough to be felt are recorded each year.
Earthquakes and Plate Earthquakes and Plate TectonicsTectonics
Areas of Risk in the Areas of Risk in the United StatesUnited StatesRisk- the impact of natural
hazards on people
Factors that affect risk:-size of the potential natural hazard
-How often they occur
-How close they are to people and population density
Areas of Risk in the Areas of Risk in the United StatesUnited StatesEarthquake risk for the United States is based on
earthquake history.
Areas of Risk in the Areas of Risk in the United StatesUnited StatesThe areas at highest risk are near plate boundaries.
-California has a very long transform fault called the San Andreas Fault.
Areas of Risk in the Areas of Risk in the United StatesUnited States
Southern Alaska is near a subduction zone.
Areas of Risk in the Areas of Risk in the United StatesUnited StatesLarge earthquakes have also happened far from
plate boundaries.This is due to zones of weakness in the interior of the North American Plate and tension stress.
Areas of Risk in the Areas of Risk in the United StatesUnited States
1886 Charleston, South Carolina
Magnitude 7.3
Intensity X
Areas of Risk in the Areas of Risk in the United StatesUnited States1812 New Madrid, Missouri- Magnitude 7.4 - 8.0