FinalCreate your very own Easter Egg to get you on the mood for the holiday. Happy Easter!

the3Doodler.com/Community | Copyright © WobbleWorks, Inc. 2015

Easter Egg

Step 1Grab a boiled egg and wipe it with tissue paper

Step 3Draw out your design for the bottom part of the egg and start doodling it.

Step 5Use a nipper to loosen up your doodle.

Step 2Wrap the egg with masking tape and mark the opening of the egg by drawing a line.

Step 4Once you are done with the bottom part of your Easter egg, melt out a small line to be able to take your doodle off the egg.

Step 6Then carefully take out the bottom part of your Easter egg.

the3Doodler.com/Community | Copyright © WobbleWorks, Inc. 2015

Easter Surprise Egg

Step 7Next, trace out your design of the top part of your Easter egg and doodle it.

Step 9To create the handle, tape your unblocking tool and roll it.

Step 11Stick one of the handles on the top part of the egg.

Step 8Repeat Step 4-6 on the top part of your Easter egg.

Step 10Create three of these handles. They should be able to fit one plastic strand.v

Step 12Carefully melt the two sides of the strands so that the plastic strand won’t move.

the3Doodler.com/Community | Copyright © WobbleWorks, Inc. 2015

Easter Surprise Egg

Step 13Then stick the other two the sides of the middle on the bottom part of the egg.

Step 15Doodle one more layer in the bottom of the egg.

Step 14Cut out the excess strand.

Step 16Carefully use your hand to create a flat surface for your Easter egg to stand.

the3Doodler.com/Community | Copyright © WobbleWorks, Inc. 2015

Easter Surprise Egg

Step 17And lastly, tape the bottom part of your Easter egg with masking tape and doodle 0.2 cm more on the top part your Easter egg to cover up the space in between.