EasyLap™ Panel is a strong fibre cement sheet with a shiplap vertical joint. Finished on site
with roll-on acrylic texture it creates a textured look with a subtle vertical joint. EasyLap Panel
offers a cost effective alternative to traditional texturing methods and is fast to install with large
format panel and no requirements for vertical set joint and control joint.
EasyLap Panel is resistant to fire, rot, damage from moisture and delivers a versatile cladding
option for modern composite design.
Ask James Hardie™ I Call 0800 808 868 I jameshardie.co.nz
EasyLapPANEL
The easy way to create a textured look
EasyLapPANEL
EasyLap™ Panel must be installed and maintained correctly and to the extent set out in James Hardie’s published literature current at the time of installation.
© 2015 James Hardie New Zealand. TM and ® denote a trademark or registered mark owned by James Hardie Technology Limited.Dulux, AcraTex and AcraShield are registered trade marks and AcraSand and Sedona are trade marks of DuluxGroup (Australia) Pty Ltd.
Accessories Description Quantity/Size (approx) Code
CLD Structural Cavity Batten19mm thick fibre cement cavity batten installed over James Hardie rigid air barrier or a building underlay. EasyLap Panels are fixed to the battens.
19 x 70mm, 2450mm long 403870
JH 9mm Panel Aluminium External Box CornerA box corner mould to form the external joints. 9mm etch primed.
2450mm long
2750mm long
3000mm long
4000mm long
304509
304510
305150
305808
JH 9mm Panel Aluminium Horizontal ‘h’ MouldA horizontal flashing to flash the horizontal joints. 9mm etch primed.
3000mm long 304508
Aluminium ‘h’ Mould JointerA jointer to cover the butt joint of ‘h’ mould.
100mm long 304512
uPVC Vent StripUsed to provide protection from vermin entering cavity space.
3000mm long 302490
CLD Batten Corner Flashing AluminiumUsed at internal corner sealant joints at floor joist level.
304652
Tools
HardieBlade™ Saw BladeDiamond tip 184mm diameter fibre cement circular saw blade. Spacers not included.
Each 300660
EasyLap™ Panel - Accessories supplied by James Hardie
EasyLap™ Panel — Sheet sizes
Product Code Length Width Thickness
mm mm mm
404764 2450 1200 9mm
404765 2750 1200 9mm
404763 3000 1200 9mm
All dimensions provided are approximate only and subject to manufacturing tolerances.
Shiplap joint profile
EasyLap™ Panel - Accessories not supplied by James Hardie
Dulux® AcraTex® Sedona™ roll on acrylic texture
Dulux® AcraTex® AcraSand™ roll on acrylic texture
Dulux® AcraTex® AcraShield® Advance topcoat (optional)