Ebara Pump

1

CONTENT

• All the performance curves shown in this catalogue are according ISO 9906 Annex A.

Self priming centrifugal pump in AISI 304 JES - JE 2

Self priming centrifugal pump in AISI 304 JESX-JEX 4

Self priming centrifugal pump in cast iron AGE-AGF 6

Self priming pump in cast iron AGA-AGC 8

Single impeller centrifugal pumps in AISI 304 CD 10

Twin impeller centrifugal pumps in AISI 304 2CD 15

Single impeller centrifugal pumps in AISI 304 CDX 19

Twin impeller centrifugal pumps in AISI 304 2CDX 24

Peripheral pumps in cast iron PRA 30

Horizontal centrifugal multistage pumps COMPACT 32

Vertical centrifugal multistage pumps CVM 34

Vertical centrifugal multistage pumps MULTIGO 36

Vertical multistage centrifugal pumps in AISI 304 EVM 38

Centrifugal pumps - open impeller in AISI 304 DWO 53

Single impeller centrifugal pump in cast iron CMA-CMB-CMC-CMD-CMR 55

Twin impeller centrifugal pumps in cast iron CDA 61

Centrifugal pumps according EN 733 (ex DIN 24255) in AISI 304 and AISI 316L SERIE 3-3L 63

Monoblock centrifugal pumps EN 733 (ex DIN 24255) in cast iron MD-MMD 90

4” Borehole centrifugal pumps WINNER 99

4” Borehole centrifugal pumps in AISI 304 4BHS 105

5” Submersible centrifugal multistage pumps IDROGO 113

6” Borehole centrifugal pumps SF6 115

6” Borehole centrifugal pumps in AISI 304 6BHS 117

Submersible sump pumps KIKA 125

Submersible sump pumps BEST ZERO 126

Submersible sump pumps in AISI 304 BEST ONE 128

Submersible sump pumps in AISI 304 BEST 2-3-4-5 130

Submersible pumps for dirty water RIGHT 132

Submersible pumps for sewage water DW-DW VOX 134

Submersible pumps for dirty water DML 136

In-line centrifugal pumps in AISI 304 LPS 143

In-line centrifugal pumps in cast iron LPC-LPCD 149

Three speed circulators MR 163

Four speed circulators and electronic circulators ETHERMA-ETHERMA E 164

Automatic lifting stations BEST BOX-MINIRIGHT-SANIRELEV 167

Booster units GP-GP INOX 168

Pressure sets 2GP - 3GP - GPE 170

Control boxes 171

2

JES-JESELF PRIMING PUMPS in AISI 304

DIMENSIONAL TABLESPump type Dimensions (mm)

Single-phaseJESM 5JESM 6JESM 8

Three-phaseJES 5JES 6JES 8

1~181181181

3~177177177

1~969696

3~929292

5,65,86

WeightA L kg

Pump type Dimensions (mm)

Single-phaseJEM 80

JEM 100JEM 120JEM 150

Three-phaseJE 80

JE 100JE 120JE 150

1~209209209214

3~205205205214

1~105105105110

3~101101101110

401432432439

100100100120

130130130150

120120120140

150150150170

213,5228,5228,5231

128143143

145,5

1213,513,515,5

WeightA B L M M1 N N1 R W kg

SPECIFICATIONS• Maximum working pressure: 6 bar • Maximum liquid temperature:

35°C according EN 60335-2-41 for domestic uses 45°C for other uses

MATERIALS• Pump body, bracket, casing cover, motor casing

and fan cover in AISI 304• Shaft in AISI 303• Impeller in AISI 304 for JE, in tecnopolymer for JES• Mechanical seal in carbon/ceramic/NBR

TECHNICAL DATA• T.E.F.C. 2 poles motor• Insulation class F• Protection degree IP44 • 1~230V ± 10% 50Hz, 3~230/400V ±10% 50Hz • Permanent split capacitor and automatic thermal

overload protection for single-phase version• Thermal protection to be provided by the user

for three-phase version • DNA 1” for JES, 1”1/4 for JE• DNM 1”

Self-priming Jet pumps manufactured in stainless steel AISI 304, suitable for water supply, domes-tic pressure boosting and small irrigation systems, pool and tank emptying and general clean waterpumping.

JES JE

3

JES-JE

Pump type kW Capacitor Absorbed Current (A) Q=CapacitySingle-phase230V 50Hz

JESM 5JESM 6JESM 8JEM 80

JEM 100JEM 120JEM 150

µF VcThree-phase230/400V 50Hz

JES 5JES 6JES 8JE 80

JE 100JE 120JE 150

0,370,440,60,6

0,750,881,1

2,12,43,04,76,46,77,6

1,51,9

2,253,34,54,75,6

0,851,11,31,92,62,73,3

2831,5373943

47,556

23262933374149

20222529

33,537

44,5

151720

26,53034

40,5

11,513,516252832

38,5

---

23,527

30,537

---

20,524

27,534

---

1821

24,531

------

29,5

1010

12,5162020

31,5

450450450450450450450

230V 400VSingle-phase

Three-phase l/minm3/h

50,3

201,2

301,8

402,4

452,7

503

603,6

704,2

754,5

H=Total head

PERFORMANCE TABLE

PERFORMANCE CURVES (according to ISO 9906 Annex A)

SELF PRIMING PUMPS in AISI 304

4

JESX-JEXSELF PRIMING PUMPS in AISI 304

SPECIFICATIONS• Maximum working pressure:6 bar • Maximum liquid temperature:


MATERIALS• Pump body, casing cover in AISI 304• Shaft in AISI 303• Impeller in AISI 304 for JEX, in tecnopolymer for JESX• Mechanical seal in carbon/ceramic/NBR

TECHNICAL DATA• Asincronous 2 poles motor• Insulation class F• Protection degree IP54 • 1~230V ± 10% 50Hz, 3~230/400V ±10% 50Hz • Permanent split capacitor and automatic thermal

overload protection for single-phase version• Thermal protection to be provided by the user for three-phase version • DNA 1” for JESX, 1”1/4 for JEX• DNM 1”

Self priming electropump manufactured in stainless steel AISI 304 suitable for water supply, domes-tic pressure boosting and small irrigation systems, pool and tank emptying and general clean water pumping.

DIMENSIONAL TABLEPump type Dimensions (mm)

Single-phaseJEXM 80JEXM 100JEXM 120JEXM 150

Three-phaseJEX 80JEX 100JEX 120JEX 150

417417417445

230230230250

215215215240

50505055

206206206216

38383840

120120120140

160160160180

206206206

203,5

PG11PG11PG11

PG13,5

143143143

145,5

10,510,811,514,1

WeightB C H3 H4 M M1 N N1 R T W kg

JESX JEX

Pump type

JESXM 5JESXM 6JESXM 8

JESX 5JESX 6JESX 8

5.15.56.1

Weightkg

[1] : 3 ˜[2] : 1 ˜

Single-phase Three-phase

5

XXX

X

X

X

X


JESXM 5JESXM 6JESXM 8JEXM 80

JEXM 100JEXM 120JEXM 150


JESX 5JESX 6JESX 8JEX 80

JEX 100JEX 120JEX 150

0,370,440,60,6

0,750,881,1

2,12,43,04,76,46,78,0

1,51,92,33,34,54,75,6

0,851,11,31,92,62,73,3

2831,5373943

47,556

23262933374149

20222529

33,537

44,5

151720

26,53034

40,5

11,513,516252832

38,5

---

23,527

30,537

---

20,524

27,534

---

1821

24,531

------

29,5

1010

12,5162020

31,5

450450450450450450450



50,3

201,2

301,8

402,4

452,7

503

603,6

704,2

754,5

H=Total head

PERFORMANCE TABLE

JESX-JEXSELF PRIMING PUMPS in AISI 304


6

AGE-AGFSELF PRIMING PUMPS in cast iron

SPECIFICATIONS• Maximum working pressure:6 bar • Maximum liquid temperature:


• Maximum suction: 8 mts

MATERIALS• Pump body in cast iron • Casing cover in AISI 304• Shaft in AISI 416• Impeller, nozzle and diffuser in tecnopolymer • Mechanical seal in carbon/ceramic/NBR

TECHNICAL DATA• Asincronous 2 poles motor • Insulation class F• Protection degree IP44 • 1~230V ± 10% 50Hz, 3~230/400V ± 10% 50Hz • Permanent split capacitor and automatic thermal


for three-phase version • DNA-DNM 1”

DIMENSIONAL TABLE


Single-phaseAGE 0.50 MAGE 0.60 MAGE 0.80 MAGF 0.60 MAGF 0.80 M

Three-phaseAGE 0.50 TAGE 0.60 TAGE 0.80 TAGF 0.60 TAGF 0.80 T

150150150180180

352352352377377

17,317,317,310,310,3

99,599,599,5127127

193193193191191

88899

160160160185185

122122122152152

3838383333

3~172,5172,5172,5187,5187,5

1~174174174189189

110110110140140

150150150180180

111111111129129

A B C D E F H H1 H2 H3 H4 N N1 R

2424241212

W

88,591112

Weightkg

Self-priming jet pumps produced in cast iron, suitable for water supply, domestic pressure boostingand small irrigation systems, pool and tank emptying and general clean water pumping.

[1] : 3 ˜[2] : 1 ˜

7

AGE-AGFSELF PRIMING PUMPS in cast iron


AGE 0.50 MAGE 0.60 MAGE 0.80 MAGF 0.60 MAGF 0.80 M


AGE 0.50 TAGE 0.60 TAGE 0.80 TAGF 0.60 TAGF 0.80 T

0,370,450,60,450,6

2,42,752,83

3,7

22

2,12,12,4

1,11,11,21,21,4

3234,537

33,842

28,429,932,730,237,9

22,422,825,623,530,7

17,617,920,517,324,8

14,114,916,811,720

12,714

15,5918

10101010

12,5

450450450450450

230V 400V1~ 3~ l/min

m3/h5

0,3100,6

201,2

301,8

402,4

452,7

H=Total head


PERFORMANCE TABLE

8

AGA-AGCSELF PRIMING PUMPS in cast iron

SPECIFICATIONS• Maximum working pressure:

6 bar for AGA 0.60-0.75-1.0010 bar for the other models

• Maximum liquid temperature: 35°C according EN 60335-2-41 for domestic uses 45°C for other uses

• Maximum suction: 8 m

MATERIALS• Pump body in cast iron • Casing cover in AISI 304 for AGA 0.60-0.75-1.00• Shaft in AISI 416 for AGA 0.60-0.75-1.00,

in AISI 303 for the other models• Impeller in tecnopolymer for AGA 0.60-0.75-1.00,

in brass for the other models• Mechanical seal in carbon/ceramic/NBR

TECHNICAL DATA• Asincronous 2 poles motor • Insulation class F• Protection degree IP44 • 1~230V ± 10% 50Hz, 3~230/400V ±10% 50Hz • Permanent split capacitor and automatic thermal


for three-phase version• DNA 1” for AGA 0.60-0.75-1.00• DNA 1” 1/2 for the other models • DNM 1”

Self priming electropump made in cast iron suitable domestic pressure boosting, small irrigation, gar-dening, car washing, tanks and pools emptying and pumping clear water in general.


Single-phaseAGA 0.60 MAGA 0.75 MAGA 1.00 MAGA 1.50 MAGA 2.00 M

-AGC 1.50 MAGC 2.00 M

-

Three-phaseAGA 0.60 TAGA 0.75 TAGA 1.00 TAGA 1.50 TAGA 2.00 TAGA 3.00 TAGC 1.50 TAGC 2.00 TAGC 3.00 T

180180180220220220220220220

1~405405405495508

-495508

-

195195195244244244244244244

10,310,310,3101010101010

3~.405405405495495508495495508

127127127157157157157157157

999

101010101010

185185185223223223223223223

152152152170170170170170170

333333535353535353

3~197,5197,5197,5229229229229229229

1~199199199247247

-247247

-

404040484848484848

140140140180180180180180180

A B C D E F H H1 H2 H3 H4 M N

180180180220220220220220220

N1 R T W S DNA

128,5128,5128,5167,5167,5167,5167,5167,5167,5

1~PG11PG11PG11

PG13,5PG13,5

-PG13,5PG13,5

-

11,811,811,815,515,515,515,515,515,5

9,59,59,5999999

G 1G 1G 1

G 11/2

G 11/2

G 11/2

G 11/2

G 11/2

G 11/2

12,51314262727262727

Weightkg

[1] : 3 ˜[2] : 1 ˜

9

AGA-AGCSELF PRIMING PUMPS in cast iron


AGA 0.60 MAGA 0.75 MAGA 1.00 MAGA 1.50 MAGA 2.00 M

-AGC 1.50 MAGC 2.00 M

-


AGA 0.60 TAGA 0.75 TAGA 1.00 TAGA 1.50 TAGA 2.00 TAGA 3.00 TAGC 1.50 TAGC 2.00 TAGC 3.00 T

0,440,550,751,11,52,21,11,52,2

3,14,05,58,19,8-

8,610,5

-

2,12,83,65,36,37,95,86,87,9

1,21,62,13,03,64,73,33,94,6

3745

47,5------

33,442,845485968

38,55158

27,137,940,345,155,664,337

49,955,6

2232

35,742,452,260,835,648,853,5

16,521,929,138,647,355,933,546,950,1

-1827

37,445,754,432,746,349,1

--

2335,142,551,631,444,947,1

---

30,836,446,428,742

43,4

---

2730,542

26,138,740,2

------

22,433,235,9

------

1927

32,5

12,514203540-

3540-

450450450450450

-450450

-



50,3

100,6

201,2

301,8

452,7

503

603,6

804,8

1006

1307,8

1609,6

H=Total head

PERFORMANCE TABLE


10

CDCENTRIFUGAL PUMPS - SINGLE IMPELLER in AISI 304


35°C according EN 60335-2-41 for domestic uses 60°C for other uses of CD 70/05-70/07-90/1090°C for other models

MATERIALS• Pump body, impeller, diffuser, casing cover, bracket, shaft,

motor casing and fan cover in AISI 304• Mechanical seal in carbon/ceramic/NBR • Special mechanical seal are available on demand

TECHNICAL DATA• T.E.F.C. 2 poles motor • Insulation class F• Protection degree IP55 • 1~230V ± 10% 50Hz, 3~230/400V ± 10% 50Hz • Permanent split capacitor and automatic thermal


for three-phase version• DNA 1”1/2 for CD200, DNA 1”1/4 for the other models• DNM 1”

Single impeller centrifugal pumps manufactured from stainless steel AISI 304, suitable for water sup-ply, treatment & irrigation. Air conditioning systems and general water pumping including moderate-ly aggressive liquids


Single-phaseCDM 70/05CDM 70/07CDM 70/12CDM 90/10

CDM 120/07CDM 120/12CDM 120/20CDM 200/12CDM 200/20

Three-phaseCD 70/05CD 70/07CD 70/12CD 90/10

CD 120/07CD 120/12CD 120/20CD 200/12CD 200/20CD 200/25

1~210210218210210206226206214

-

3~206206218206206206226206214226

229229250229229229250229229250

106106118106106106118106106118

298298328328298328356328356366

123123132123123123132123123132

1~ 102102102102102102110102110

-

3~106106102106106102110102110110

1~ 100100100100100100100100120

-

3~100100100100100100100100120120

1~130130130130130130130130150

-

3~130130130130130130130130150150

120120120120120120120120140140

150150150150150150150150170170

A B H H1 H2 L M M1 N N1

101101131131101101131131133138

R W DNA

636393936363939395

100

G 1 1/4

G 1 1/4

G 1 1/4

G 1 1/4

G 1 1/4

G 1 1/4

G 1 1/4

G 1 1/2

G 1 1/2

G 1 1/2

9,410,814,112,410,713,317,312,716,717,4

Weightkg

11



CDM 70/05CDM 70/07CDM 70/12CDM 90/10CDM 120/07CDM 120/12CDM 120/20CDM 200/12CDM 200/20


CD 70/05CD 70/07CD 70/12CD 90/10CD 120/07CD 120/12CD 120/20CD 200/12CD 200/20CD 200/25

0,370,550,90,750,550,91,50,91,51,8

3,14,66,55,64,66,99,76,39,8-

2,43,55,04,03,24,97,04,77,08,6

1,42,02,92,31,852,84,02,74,05,0

20,72835

30,3------

18,424,531,227,220,529,537,5

---

15,920,526,523,618,727,135,320,63138

15--

22,318,126,134,620,230,637,5

---

19,516,824,333,119,529,736,4

----

15,522,431,418,528,935,3

----

13,719,528,617,127,533,6

----

12,5--

16,126,632,4

-------

14,625,130,5

-------

12,52328

12,516

31,52016

31,540

31,540-

450450450450450450450450450

-



201,2

503

804,8

905,4

1106,6

1307,8

1609,6

18010,8

21012,6

25015

H=Total head

PERFORMANCE CHART (according to ISO 9906 Annex A)

PERFORMANCE TABLE

12


PERFORMANCE CURVES CD 70-90 series (according to ISO 9906 Annex A)

13


PERFORMANCE CURVES CD 120 series (according to ISO 9906 Annex A)

14


PERFORMANCE CURVES CD 200 series (according to ISO 9906 Annex A)

15

2CDCENTRIFUGAL PUMPS - TWIN IMPELLER in AISI 304



MATERIALS• Pump body, impeller, diffuser, casing cover, bracket, shaft,

motor casing and fan cover in AISI 304• Mechanical seal in carbon/ceramic/NBR • Special mechanical seal are available on demand



for three-phase version • DNM 1” - DNA 1”1/4

Twin impeller centrifugal pumps manufactured from stainless steel AISI 304, suitable for water sup-ply, treatment and irrigation. Air conditioning systems and general water pumping including moder-ately aggressive liquids

DIMENSIONAL TABLE


Single-phase2CDM 70/102CDM 70/122CDM 70/152CDM 70/202CDM 120/152CDM 120/20

Three-phase2CD 70/102CD 70/122CD 70/152CD 70/202CD 120/152CD 120/20

1~210206226214214214

3~206206226214214214

3~363363393393393393

229229229229229229

1~363363375393375393

106106106106106106

123123123123123123

1~106102110110110110

3~102102110110110110

100100120120120120

130130150150150150

120120140140140140

150150170170170170

164164170170170176

A B H H1 H2 L M M1 N N1 R

939395959595

W

1~14

14,717,819,816,117,8

3~14

14,717,818,815,817,5

Weightkg

16



2CDM 70/102CDM 70/122CDM 70/152CDM 70/202CDM 120/152CDM 120/20


2CD 70/102CD 70/122CD 70/152CD 70/202CD 120/152CD 120/20

0,750,91,11,51,11,5

5,87,08,1

10,08,3

10,2

4,05,05,67,05,67,0

2,32,93,34,03,34,0

38,544,552,560--

35,340,348

55,642

51,5

31,535,542,850,441

49,5

2730

36,544

39,547,4

----

3541,8

----

3036,5

2031,535403540

450450450450450450


three-phase l/minm3/h

201,2

402,4

603,6

804,8

1207,2

1509

H=Total head

PERFORMANCE TABLE


17


PERFORMANCE CURVES 2CD 70 series (according to ISO 9906 Annex A)

18


PERFORMANCE CURVES 2CD 120 series (according to ISO 9906 Annex A)

19

CDXCENTRIFUGAL PUMPS - SINGLE IMPELLER in AISI 304


35°C according EN 60335-2-41 for domestic uses 60°C for other uses of CDX 70/05-70/07-90/1090°C for other models110° for H version

MATERIALS• Pump body, impeller, diffuser and casing cover in AISI 304• Shaft in AISI 303• Bracket and motor casing in alluminium• Mechanical seal in carbon/ceramic/NBR • Special mechanical seal are available on demand



for three-phase version • DNA 1”1/2 for CDX200, DNA 1”1/4 for the other models• DNM 1”

Single impeller centrifugal pumps with hydraulic components manufactured from stainless steel AISI304, suitable for pressure boosting, water supply, treatment & irrigation. Air conditioning systems andgeneral water pumping including moderately aggressive liquids


Single-phaseCDXM 70/05CDXM 70/07CDXM 90/10

CDXM 120/07CDXM 120/12CDXM 120/20CDXM 200/12CDXM 200/20

Three-phaseCDX 70/05CDX 70/07CDX 90/10

CDX 120/07CDX 120/12CDX 120/20CDX 200/12CDX 200/20CDX 200/25

208208208208208232208208232

1~

318318318318318345318345

-

178178178178178199178199199

229,5229,5229,5229,5229,5250

229,5229,5250

3~

318318318318318345318345345

106106106106106118106106118

123,5123,5123,5123,5123,5132

123,5123,5132

209209209209209235209223235

215215215215215253215240

-

505050505055505555

383838383840384040

120120120120120140120140140

160160160160160180160180180

108108108108108

105,5108

105,5105,5

A B C H H1 H2 H3 H4 M M1 N N1 R

PG11PG11PG11PG11

PG13,5PG13,5PG13,5PG13,5

-

T W DNA

92,592,592,592,592,595

92,59595

G 1 1/4

G 1 1/4

G 1 1/4

G 1 1/4

G 1 1/4

G 1 1/4

G 1 1/2

G 1 1/2

G 1 1/2

Single-phase9,110,411,910,412,517,216,315,3

-

Three-phase9,110,411,910,412,516,211,414,217

Weightkg

20



CDXM 70/05CDXM 70/07CDXM 90/10CDXM 120/07CDXM 120/12CDXM 120/20CDXM 200/12CDXM 200/20


CDX 70/05CDX 70/07CDX 90/10CDX 120/07CDX 120/12CDX 120/20CDX 200/12CDX 200/20CDX 200/25

0,370,550,750,550,91,50,91,51,8

3,14,65,64,66,99,36,310,7

-

2,43,54,03,25,27,04,77,08,2

1,42,02,31,93,04,02,74,04,8

20,728

30,3------

18,424,527,220,529,537,5

---

15,920,523,618,727,135,320,63138

15-

22,318,126,134,620,230,637,5

--

19,516,824,333,119,529,736,4

---

15,522,431,418,528,935,3

---

13,719,528,617,127,533,6

---

12,5--

16,126,632,4

------

14,625,130,5

------

12,52328

12,5162016

31,540

31,540-

450450450450450450450450

-



201,2

503

804,8

905,4

1106,6

1307,8

1609,6

18010,8

21012,6

25015

H=Total head

PERFORMANCE TABLE


21

CDXELETTROPOMPE CENTRIFUGHE MONOGIRANTE in AISI 304

PERFORMANCE CURVES CDX 70-90 series (according to ISO 9906 Annex A)

22


PERFORMANCE CURVES CDX 120 series (according to ISO 9906 Annex A)

23


PERFORMANCE CURVES CDX 200 series (according to ISO 9906 Annex A)

24

2CDXCENTRIFUGAL PUMPS - TWIN IMPELLER in AISI 304


35°C according EN 60335-2-41 for domestic uses 60°C for other uses110° for H version

MATERIALS• Pump body, impeller, diffuser and casing cover in AISI 304• Shaft in AISI 304• Bracket and motor casing in alluminium• Mechanical seal in carbon/ceramic/NBR • Special mechanical seal are available on demand

TECHNICAL DATA• T.E.F.C. 2 poles motor • Insulation class F• Protection degree IP55 • 1 230V ± 10% 50Hz, 3 230/400V ±10% 50Hz • Permanent split capacitor and automatic thermal


for three-phase version• DNA 1”1/2 for 2CDX200

DNA 1”1/4 for the other models• DNM 1”

Twin impeller centrifugal pumps with hydraulic components constructed in stainless steel AISI 304,suitable for pressure boosting, water supply, water treatment & irrigation. Air conditioning systemsand general water pumping including moderately aggressive liquids


Single-phase2CDXM 70/102CDXM 70/122CDXM 70/152CDXM 70/202CDXM 120/152CDXM 120/20

-----

Three-phase2CDX 70/102CDX 70/122CDX 70/152CDX 70/202CDX 120/152CDX 120/202CDX 120/302CDX 120/402CDX 200/302CDX 200/402CDX 200/50

208208232232208208232232208232232

355355380385380380390420394420445

12,512,512,512,512,512,512,512,512,512,516,0

888888888813

182182199199199199

209,5231,5210

231,5231,5

229229250250229229250250229250250

106106118118106106118118106118118

123123132132123123132132123132132

1~

209209235235223223240240240240252

3~

215215249249237237

-----

5050555555556565656568

3838404040404040404050

120120140140140140140140140140160

160160180180180180180180180180210

A CB D E H H1 H2 H3 H4 M M1 N N1

142,5142,5140140140140145145145145145

R T V W S DNA

1~

PG11PG11

PG13,5PG13,5PG13,5PG13,5

-----

3~

PG11PG11PG11PG11PG11PG11

PG13,5PG13,5PG13,5PG13,5PG16

9393

95,595,595,595,5110,5110,5110,5110,5110,0

999999999912

G 1 1/4

G 1 1/4

G 1 1/4

G 1 1/4

G 1 1/4

G 1 1/4

G 1 1/4

G 1 1/4

G 1 1/2

G 1 1/2

G 1 1/2

Single-phase13,514,217,418,615,518,0

-----

Three-phase13,313,816,418,215,316,923,226,425,025,032,7

Weightkg

25



2CDXM 70/102CDXM 70/122CDXM 70/152CDXM 70/202CDXM 120/152CDXM 120/20

-----


2CDX 70/102CDX 70/122CDX 70/152CDX 70/202CDX 120/152CDX 120/202CDX 120/302CDX 120/402CDX 200/302CDX 200/402CDX 200/50

0,750,91,11,51,11,52,23,02,23,03,7

6,07,08,09,98,310,2

-----

4,05,05,67,05,67,08,710,810,411,415

2,32,93,24,03,24,05,06,26,06,68,7

38,544,552,560-------

35,340,348

55,642

51,559

68,5---

31,535,542,850,441

49,557

66,552

62,571,5

2730

36,544

39,547,454,664

50,861,170,1

----

3541,849,258

48,15867

----

3036,54452

45,555,264,3

--------

42,752,361,2

--------

39,549

57,5

2031,535403540-----

450450450450450450

-----



201,2

402,4

603,6

804,8

1207,2

1509

18010,8

21012,6

H=Total head

PERFORMANCE TABLE


26


PERFORMANCE CURVES series 2CDX 70 (according to ISO 9906 Annex A)

27


PERFORMANCE CURVES 2CDX 120 series (according to ISO 9906 Annex A)

28


PERFORMANCE CURVES 2CDX 200 series (according to ISO 9906 Annex A)

30

PRAPERIPHERAL PUMPS in cast iron

SPECIFICATIONS• Maximum working pressure: 6 bar for PRA 0.50

7,5 bar for PRA 0.80 and 12 bar for the other models • Maximum liquid temperature:


MATERIALS• Pump body and bracket in cast iron• Shaft in C10 for PRA 0.50 version

AISI 303 for the other models• Mechanical seal in carbon/ceramic/NBR

TECHNICAL DATA• T.E.F.C. 2 poles motor • Insulation class F• Protection degree IP44 • 1~230V ± 10% 50Hz, 3~230/400V ±10% 50Hz • Permanent split capacitor and automatic thermal


for three-phase version • DNM-DNA 1”

Peripheral turbine pumps constructed from cast iron and bronze suitable for domestic uses, hot andcold water boosting and pressure boilers feeding.

DIMENSIONAL TABLEPump type Dimensions (mm) Weight (kg)

PRA 0.50MPRA 0.50TPRA 0.80MPRA 0.80TPRA 1.00MPRA 1.00TPRA 1.50MPRA 1.50TPRA 2.00MPRA 2.00T

130 263.5 148.5 10 50 7 143 63 80 - 160 100 23 100 120 118.5 PG11 69 7130 263.5 148.5 10 50 7 143 63 80 149.5 - 100 23 100 120 118.5 - 69 7130 290.5 159.3 11 53.8 9 161 71 90 - 178 112 25 112 135 122 PG11 69 7150 290.5 159.3 11 53.8 9 161 71 90 167.5 - 112 25 112 135 122 - 69 7150 290.5 159.3 11 53.8 9 161 71 90 - 178 112 25 112 135 122 PG11 69 7150 290.5 159.3 11 53.8 9 161 71 90 167.5 - 112 25 112 135 122 - 69 7162 330.5 188 12 57 12 175 80 95 - 212 124 28 125 152 144 PG13.5 88 9162 330.5 188 12 57 12 175 80 95 186.5 - 124 28 125 152 144 88 9162 330.5 188 12 57 12 175 80 95 - 212 124 28 125 152 144 PG13.5 88 9162 330.5 188 12 57 12 175 80 95 186.5 - 124 28 125 152 144 - 88 9

5.65.69.29.29.79.714.514.515.815.8

A CB D E F H H1 H2 H3 H4 M M1 N N1 R T W S

[1] = 3∼[2] = 1∼

31

PRAPERIPHERAL PUMPS in cast iron

d l


Pump type kW Capacitor Q=Capacity

PRA 0.50M PRA 0.50T 0.37 10 450 37 33.3 28.7 23.7 5 - - -PRA 0.80M PRA 0.80T 0.6 16 450 56 50.7 45.1 39.8 25 12 - -PRA 1.00M PRA 1.00T 0.75 20 450 62 54.4 47 40.4 24.3 13 - -PRA 1.50M PRA 1.50T 1.1 35 450 - 81 76.9 71.9 55.8 37.9 18 -PRA 2.00M PRA 2.00T 1.5 40 450 - 88 82.9 77 59.8 43.3 27.4 22

l/minm3/h

50.3

100.6

150.9

201.2

352.1

503

653.9

704.2

H=Total head

PERFORMANCE TABLE

Single-phase230V 50Hz

Three-phase230/400V 50Hz

µF Vc

32

COMPACTHORIZONTAL CENTRIFUGAL MULTISTAGE PUMPS



MATERIALS• Pump body and bracket in cast iron • External casing in AISI 304• Impeller and diffuser in tecnopolymer• Shaft in AISI 416• Mechanical seal in carbon/ceramic/NBR



for three-phase version • DNM 1” – DNA 1”1/4 for COMPACT B/12 and B/15,

1” for other models

Horizontal centrifugal multistage pumps suitable for pressure boosting systems,car washing, smallgarden irrigation and general clean water pumping.

COMPACT

DIMENSIONAL TABLE


Single-phaseCOMPACT AM/4COMPACT AM/6COMPACT AM/8COMPACT AM/10COMPACT AM/12COMPACT AM/15COMPACT BM/12COMPACT BM/15

Three-phaseCOMPACT A/4COMPACT A/6COMPACT A/8COMPACT A/10COMPACT A/12COMPACT A/15COMPACT B/12COMPACT B/15

1~

183,5183,5183,5193,5193,5193,5193,5193,5

3~

159159159169169169169169

82108134142168194116142

51,551,551,569,569,569,569,569,5

307,5333,5359,5426452490400438

120,5146,5172,5198,5224,5250,5172,5198,5

127,5127,5127,5123,5123,5123,5123,5123,5

38,538,538,542,542,542,542,542,5

6262628080808080

120,5146,5172,5180,5206,5232,5154,5180,5

G1G1G1G1G1G1

G1 1/4

G1 1/4

8,49,310,314,515,516,714,915,9

WeightA B C D E H1 H2 M R DNA kg

33

COMPACT


COMPACT AM/4COMPACT AM/6COMPACT AM/8COMPACT AM/10COMPACT AM/12COMPACT AM/15COMPACT BM/12COMPACT BM/15


COMPACT A/4COMPACT A/6COMPACT A/8

COMPACT A/10COMPACT A/12COMPACT A/15COMPACT B/12COMPACT B/15

0,30,440,6

0,750,91,10,91,1

2,53,04,06,06,27,35,87,3

1,92,32,64,24,75,74,75,9

1,11,31,52,42,43,32,73,4

213140576879--

18,728,236,153

63,474,647,558

16,725,232

48,658,469,145,956

14,421,827,443,452,362,343,754

11,918

22,437,144,954

41,351,5

69

10,5202428

35,244,5

------

27,634,5

------

1822

1012,51420

31,531,531,531,5

450450450450450450450450



201,2

301,8

402,4

503

603,6

804,8

1006

1207,2

H=Total head

PERFORMANCE TABLE


HORIZONTAL CENTRIFUGAL MULTISTAGE PUMPS

34

CVM AM/4 63 355 112 116 92 113 11,0 11,0CVM AM/6 63 381 138 116 92 113 11,7 11,6CVM AM/8 63 407 164 116 92 113 12,7 12,6CVM AM/10 71 468 190 137 101 122 16,5 16,6CVM AM/12 71 494 216 137 101 122 17,5 17,6CVM AM/15 71 531 242 137 101 122 18,5 18,6CVM BM/10 71 416 138 137 101 122 15,9 15,9CVM BM/12 71 442 164 137 101 122 16,8 16,7CVM BM/15 71 479 190 137 101 122 18,0 17,9

CVMVERTICAL CENTRIFUGAL MULTISTAGE PUMPS



MATERIALS• Pump body and bracket in cast iron • External casing in AISI 304• Impeller and diffuser in tecnopolymer• Shaft in AISI 416• Mechanical seal in carbon/ceramic/NBR



for three-phase version • DNM – DNA 1”1/4

Vertical centrifugal multistage pumps suitable for pressure boosting systems, car washing, irrigationand general clean water pumping. Reliable and noiseless pumps.

CVM

DIMENSIONAL TABLE

Pump type Dimensions (mm) WeightMW

Motor B H Ø [1] [2] Kg.

[1] Only for three-phase[2] Only for single-phase

35

------

14,719,624,5

CVM

Pump type

kW HP

Capacitor Absorbed Current (A) Q=CapacitySingle-phase230V 50Hz

CVM AM/4CVM AM/6CVM AM/8CVM AM/10CVM AM/12CVM AM/15CVM B/10CVM B/12CVM B/15


CVM A/4CVM A/6CVM A/8CVM A/10CVM A/12CVM A/15CVM B/10CVM B/12CVM B/15

0,30,440,6

0,750,91,1

0,750,91,1

0,40,60,81

1,21,51

1,21,5

2,63,24,06,06,57,25,66,27,4

1,92,32,84,04,85,74,14,75,5

1,91,31,62,32,83,32,42,73,2

21,231,842,457,569,080,5

---

19,729,539,454,064,875,636,248,260,3

17,826,735,649,559,469,335,146,858,5

15,623,231,143,752,461,133,745,056,2

13,019,425,936,643,951,232,042,653,3

6,49,612,819,523,427,327,536,645,8

------

21,628,836,0

1012,51420

31,531,520

31,531,5

450450450450450450450450450


Three-phase l/min 0m3/h 0

201,2

301,8

402,4

503

603,6

804,8

1006

1207,2

H=Total head

PERFORMANCE TABLE


VERTICAL CENTRIFUGAL MULTISTAGE PUMPS

Power

23,835,747,662,575,087,538,150,863,5

36

MULTIGOVERTICAL CENTRIFUGAL MULTISTAGE PUMPS



MATERIALS• Pump body, casing cover, external casing

and motor casing in AISI 304 • Impeller and diffuser in tecnopolymer• Shaft in AISI 416• Mechanical seal in carbon/ceramic/NBR

TECHNICAL DATA• Asincronous 2 poles motor cooled by the pumped liquid• Insulation class F• Protection degree IP68 • 1~230V ± 10% 50Hz, 3~400V ± 10% 50Hz • Permanent split capacitor and automatic thermal


for three-phase version • DNA- DNM 1”1/4

Low noise Vertical Multistage Pump, the motor is cooled by pumped liquid, whilst simultaneouslyreducing the noise levels as the liquid passes around the motor within a water jacket. The doublemechanical seal with interposed chamber containing lubrication fluid ensuring long life and reliability.Suitable for booster sets, water features and irrigation systems. This pump is also suitable for instal-lations where the pump is required to run under flood conditions. Supplied with 5 m cable lenght typeH07 RN-F.

MULTIGO

DIMENSIONAL TABLE

Pump type H

Single-phaseMULTIGO M 40/08MULTIGO M 40/10MULTIGO M 40/12MULTIGO M 40/15MULTIGO M 80/12MULTIGO M 80/15

-

Three-phaseMULTIGO 40/08MULTIGO 40/10MULTIGO 40/12MULTIGO 40/15MULTIGO 80/12MULTIGO 80/15MULTIGO 80/20

547573624650573598624

1~

13,414,414,816,414,816,1

-

3~

13,014,014,416,014,415,717,2

Weightmm kg

37

MULTIGO


Pump type kW Capacitor Absorbed Current (A) Q=Capacity


MULTIGO M 40/08MULTIGO M 40/10MULTIGO M 40/12MULTIGO M 40/15MULTIGO M 80/12MULTIGO M 80/15

-

µF VcThree-phase400V 50Hz

MULTIGO 40/08MULTIGO 40/10MULTIGO 40/12MULTIGO 40/15MULTIGO 80/12MULTIGO 80/15MULTIGO 80/20

0,60,750,91,10,91,11,5

4,35,76,87,36,47,5-

1,92,22,43,02,33,13,5

43,354,164,975,7

---

40,250,260,270,345,657

68,4

36,345,454,563,6445566

26,132,639,245,738,848,558,2

13,416,820,223,5324048

----

23,228

34,8

----

15,219

22,8

162020

31,520

31,5-

450450450450450450

-

400V1~

230V3~ l/min

m3/h201,2

301,8

402,4

603,6

804,8

1006

1207,2

H=Total head

PERFORMANCE TABLE

VERTICAL CENTRIFUGAL MULTISTAGE PUMPS

38

VERTICAL MULTISTAGE PUMPS in AISI 304

SPECIFICATIONS• Maximum working pressure up to 25 bar • Liquid temperature: from –15°C up to +120°C

MATERIALS• Pump body, external casing, casing cover, impellers,

diffusers, bearing sleeve, coupling guard and bolts incontact with liquid AISI 304 (“G” version for EVM 30-60:Bottom casing in cast iron).

• Tie-rods and bolts not in contact with liquid in zinc coated steel

• Shaft in AISI 316• Bearing in contact with liquid in tungsten-carbide• Bracket and base in cast iron• Mechnical seal in SiC/Carbone/FPM

TECHNICAL DATA• Asincronous 2 poles motor • Insulation class F• Protection IP55 • 1~230V ± 10% 50Hz up to 2,2 kW, 3~230/400V ±10%

50Hz up to 4 kW included, 3~400/690V ±10% above 5,5kW

Vertical multistage centrifugal pumps completely made of stainless steel AISI 304. Reliable, quiet andeasy to maintain. Suitable for municipal, Industrial and agricultural applications e.g. Fire fighting,water boosting (WRAS approved) water treatment plants, irrigation, hot and cold water movement forheating systems, cooling and airconditioners, especially suitable for boiler feed due to the robust con-struction of the pumps. IEC standard motors are used on all models.

EVM

13,2-----------------

l/minm3/h

50030

20012

30018

40024

60036

80048

100060

120072

40


EVM

kW Pmax[Mpa]

MotorSize

Capacitor Absorbed Current (A)

0,370,370,550,550,750,751,11,11,51,52,22,23,00,370,550,751,11,11,51,52,22,22,23,03,04,04,00,751,11,52,22,23,04,04,05,55,55,57,57,57,52,23,04,05,55,57,57,51111151515

1,61,61,61,61,61,61,61,61,61,62,52,52,51,61,61,61,61,61,61,61,61,61,61,61,62,52,51,61,61,61,61,61,61,61,61,61,62,52,52,52,51,61,61,61,61,61,61,62,52,52,52,52,5

71717171808080809090909010071718080809090909090100100112112808090909010011211213213213213213213290100112132132132132160160160160160

µF

101012122020303040406060-

10122030304040606060----

2030406060---------

60-----------

Vc

400400400400400400400400400400400400

-400400400400400400400400400400

----

400400400400400

---------

400-----------

1~

3,03,03,83,85,35,36,56,59,59,51313-

3,03,85,36,56,59,59,5131313----

5,36,59,51313---------

13-----------

3~230V

1,651,652,342,342,82,84,04,05,75,77,67,610,91,62,32,84,04,05,75,77,67,67,610,910,914,214,22,84,05,77,67,67,610,914,214,2

-----

7,610,914,2

---------

3~400V

0,950,951,351,351,61,62,32,33,33,34,44,46,30,951,351,62,32,33,33,34,44,44,46,36,38,28,21,62,33,34,44,46,38,28,211,511,511,515,315,315,34,46,38,211,511,515,315,320,420,427,627,627,6

3~690V

-----------------------------------

6,66,66,68,88,88,8---

6,66,68,88,811,811,815,915,915,9

Pump typeEVM

Q=Capacity

Three-phase

EVM2 2N/0,37EVM2 3N/0,37EVM2 4N/0,55EVM2 5N/0,55EVM2 6N/0,75EVM2 7N/0,75EVM2 9N/1,1EVM2 11N/1,1EVM2 13N/1,5EVM2 15N/1,5EVM2 18F/2,2EVM2 22F/2,2EVM2 26F/3,0EVM4 2N/0,37EVM4 3N/0,55EVM4 4N/0,75EVM4 5N/1,1EVM4 6N/1,1EVM4 7N/1,5EVM4 8N/1,5EVM4 10N/2,2EVM4 11N/2,2EVM4 12N/2,2EVM4 14N/3,0EVM4 16N/3,0EVM4 19F/4,0EVM4 22F/4,0EVM8 2N/0,75EVM8 3N/1,1EVM8 4N/1,5EVM8 5N/2,2EVM8 6N/2,2EVM8 8N/3,0EVM8 10N/4,0EVM8 11N/4,0EVM8 12N/5,5EVM8 14N/5,5EVM8 15F/5,5EVM8 16F/7,5EVM8 18F/7,5EVM8 20F/7,5EVM16 2F/2,2 EVM16 3F/3,0EVM16 4F/4,0 EVM16 5F/5,5 EVM16 6F/5,5 EVM16 7F/7,5EVM16 8F/7,5 EVM16 10F/11EVM16 12F/11EVM16 14F/15EVM16 15F/15 EVM16 16F/15

Single-phase

EVM2 2N/0,37 MEVM2 3N/0,37 MEVM2 4N/0,55 MEVM2 5N/0,55 MEVM2 6N/0,75 MEVM2 7N/0,75 MEVM2 9N/1,1 MEVM2 11N/1,1 MEVM2 13N/1,5 MEVM2 15N/1,5 MEVM2 18F/2,2 MEVM2 22F/2,2 M

-EVM4 2N/0,37 MEVM4 3N/0,55 MEVM4 4N/0,75 MEVM4 5N/1,1 MEVM4 6N/1,1 MEVM4 7N/1,5 MEVM4 8N/1,5 MEVM4 10N/2,2 MEVM4 11N/2,2 MEVM4 12N/2,2 M

----

EVM8 2N/0,75 MEVM8 3N/1,1 MEVM8 4N/1,5 MEVM8 5N/2,2 MEVM8 6N/2,2 M

---------

EVM16 2F/2,2 M-----------

12,819,226

32,538

44,358,168,784

95,5120

141,2165,117,225,734,944,153,261,871,688,298106127142168195

--------------------------

7,511,115,218,822,526,133,839,548,855,974

81,710515,823,432

40,648,256,565,881

90,297,4116130

154,2180

--------------------------

-------------

13,921

28,436,343,550,958,272,581,887,2105,7118

138,2163,521,132

42,853,664,485,7107117129150162171193219

------------

-------------

13,420,227,4354249

57,170,678,684

102,2116,7134,6158,120,831,842,253

64,285106

116,2127,1148,3160,7170

191,2217,2

------------

-------------

6,910,515,519,824

27,733

39,645

47,560,567,675,288,919,229,540

49,159

80,298,4108

118,4137,5148,7157,8176,2202,3

------------

---------------------------

17,126,836,144,353,672,587,997,8107,5124,8134,2140,9158

183,229

43,658,273,888,3103119148181207226236

---------------------------

10,416,722,628,333,845,856,561,467,879,186,690,410212126,238,152

67,179,892,5108

132,2164,5186,5207

215,2

-----------------------------------------

21,130,742,354,965

76,588,1108,9138

152,3171,8181

-----------------------------------------

10,615,422,329,535,841,349,259

77,682,6100108

l/minm3/h

201,2

402,4

603,6

754,5

804,8

1207,2

1509,0

22513,5

30018

40024

H=Total head

Pump typeEVM

kW Absorbed Current (A) Q=Capacity

EVM30 2F/4EVM30 3F/5,5EVM30 4F/7,5EVM30 5F/11EVM30 6F/11EVM30 7F/15EVM30 8F/15EVM30 9F/18,5EVM30 10F/18,5EVM30 11F/22EVM30 12F/22EVM60 2F/5,5EVM60 3F/7,5EVM60 4F/11EVM60 5F/15EVM60 6F/15EVM60 7F/18,5EVM60 8F/22

45,57,511111515

18,518,522225,57,5111515

18,522

Maximumworkingpressure

Motorsize

[MPa]

1,61,61,61,61,61,62,52,52,52,52,51,61,61,61,61,61,61,6

112132132160160160160160160180180132132160160160160180

7,610,613,920,120,126,826,832,332,339,739,710,613,920,126,826,832,339,7

-6,18,011,611,615,415,418,618,622,922,96,18,011,615,415,418,622,9

3958,578

95,3112,6134,3156

175,5195

214,5234

-------

36,554,873

89,2105,4125144163182

201,5221

-------

3349,566

80,394,61131301481661832003043

59,571,583,5103,5120

284256

67,979,896,6114

128,514315717129

41,457,269

80,699,8115,7

2131,542

52,362,575,38810011212313427,839,354,66677

95,6110,5

24,734,748,858,468,385

98,2

20,228,540,348,857

71,283

14,5202935415262

230V 400V 690VThree-phase

H=Total head

16,825,233,942

50,558,875,791,1109126156186220

----------------------------------------

Pump Type Size Max. working MaterialEVM [mm] pressure A B Rubber

[MPa] Stationary seal ring Rotary seal ring

30-60 25 1.6 Silicon carbide Carbon graphite FPM2.5

30-60* 25 1.6 Silicon carbide Carbon graphite EPDM2.5

* WRAS approved version

41

EVMVERTICAL MULTISTAGE PUMPS in AISI 304

MECHANICAL SEAL EVM 30-60

Pump Type Size Max. working MaterialEVM [mm] pressure A B Rubber

[MPa] Stationary seal ring Rotary seal ring

2-4 12.7 1.6

2.5

8 16 1.6 Silicon carbide Carbon graphite FPM2.5

16 20 1.6

2.5

2-4* 12.7 1.6 Ceramic Carbon graphite EPDM

2.5 Silicon Carbide Carbon graphite EPDM

8* 16 1.6 Ceramic Carbon graphite EPDM


16* 20 1.6 Ceramic Carbon graphite EPDM


MECHANICAL SEAL EVM 2-16

* WRAS approved version

42

Liner ringis a self-aligning, floating design constructed ofEPD bonded to stainless steel to preventswelling at high temperatures

Standard IEC motors

Positive SealingO-rings betweenintermediatecasings providepositive sealing

Tungsten carbide lower pump bearingsand sleeves are standard construction for allservices providing maximum operating life

Air ventin casing cover allows proper venting preventing airentrapment and dry run

Vent positioneliminates all air

Lowermechanicalseal position

Mechanical sealSilicon/Carbon/FPMmechanical shaftseal

Metal core

The EBARA EVM vertical multistage pumps offer technically advanced designs to meet marketdemands including hot water applications.Unique bulge forming process produces rugged construction with increased wall thickness and assurescomponent integrity.

Impeller

Intermediate Case

T = thickness back shroud

t = thickness front shroud


43

All wetted parts are constructed of high quality stainless steel.EBARA's robust construction extends to critical internal components such as the impellers. Theback shrouds are as much as three times thicker than the front shrouds while front shrouds are20% to 60% thicker than comparable designs.


Dimensions & flangesinstallation is to marketaccepted dimensions foreasy upgrade of existinginstallations

Square-edge spline shaftprovides positive location and drive of impellerseliminating wear from sliding between faces

Floating Outer Casing

clearance

Thrust Bearingbuilt-in on 3 HP and larger pumpsto handle axial thrust loads

MotorKey

Coupling

Snap Ring

Key

MotorBracket

Direct drivepump and motor shafts are keyed for positive,reliable power transmission with no adjustmentsnecessary

Tie bolts

Floating outer casingallows for thermal expansion inhot water applications and isflexible preventing deformationdue to pressure fluctuations

Anti-erosion measuresa dish-shaped insert is fitted to the intermediatecasing designed to promote smooth flow andprevent high velocity areas that accelerate erosion

44


PERFORMANCE CHART (according to ISO 9906 grade 2)

EVM

45



EVM

46


PERFORMANCE CURVES EVM4 series (according to ISO 9906 Annex A)

47



48



49

PERFORMANCE CURVES EVM 30 series (according to ISO 9906 Annex A)


50

PERFORMANCE CURVES EVM 60 series (according to ISO 9906 Annex A)


51


EVM 2-16

EVM 30-60

HOLES

HOLES

52


Pump type Motor type

Size H PL ML D G I MW SA SG SE SF ST SD BL BW BM BY1 BF BHPump( kgf)

Motor( kgf )

EVM30 2F/4 112 502 301 250 221 146 60,5 25 EVM30 3F/5,5 132 571 300 75,5 37

EVM30 4F/7,5 132 619 300 79 42

EVM30 5F/11 160 697 93 73

EVM30 6F/11 160 745 96 73

EVM30 7F/15 160 793

320

320

320

320

320

320320

320

320

320

320

100 84

EVM30 8F/15 160 841

350

350350

350350

350350

350

208,5208,5

208,5

208,5

208,5

208,5103 84

EVM30 9F/18,5 160 889 106,5 94

EVM30 10F/18,5 160 937 110 94

EVM30 11F/22 180 985 223,5223,5

115,5 119

EVM30 12F/22 180 1033 119 119

EVM60 2F/5,5 132 623,5 84,5 37

EVM60 3F/7,5 132 695,5 88,5 42

EVM60 4F/11 160 797,5 104 73

EVM60 5F/15 160 869,5

365365365365

365365

365

108 84

EVM60 6F/15 160 941,5

350

350

350350

350

112 84

EVM60 7F/18,5 160 1013,5 116 94

EVM60 8F/22 180 1085,5 570 360 223,5 123 119

Dimensions (mm) Weights

105

105

105

105

105

105

105105

105

105

105140

140

140

140

140140

140

492,5

492,5492,5

492,5492,5492,5

492,5492,5492,5492,5

570570

367367

367 300367 300

360360

261 163,5261 163,5

261 163,5261 163,5

208,5310208,5310

208,5310

208,5310

310310

310310310

310

150100 180 220 24 18 260 306 190 266 14 35

150100 180 220 24 18 260 306 190 266 14 35

150100 180 220 24 18 260 306 190 266 14 35

150100 180 220 24 18 260 306 190 266 14 35

150100 180 220 24 18 260 306 190 266 14 35150100 180 220 24 18 260 306 190 266 14 35150100 180 220 24 18 260 306 190 266 14 35

65 122 145 185 22 18 210 280 170 240 14 35

65 122 145 185 22 18 210 280 170 240 14 35

65 122 145 185 22 18 210 280 170 240 14 3565 122 145 185 22 18 210 280 170 240 14 3565 122 145 185 22 18 210 280 170 240 14 3565 122 145 185 22 18 210 280 170 240 14 35

65 122 145 185 22 18 210 280 170 240 14 3565 122 145 185 22 18 210 280 170 240 14 3565 122 145 185 22 18 210 280 170 240 14 35

65 122 145 185 22 18 210 280 170 240 14 3565 122 145 185 22 18 210 280 170 240 14 35

DIMENSIONAL TABLE EVM 30-60

Pump typeEVM

Dimensions (mm)

EVM2 2N/0,37EVM2 3N/0,37EVM2 4N/0,55EVM2 5N/0,55EVM2 6N/0,75EVM2 7N/0,75EVM2 9N/1,1 EVM2 11N/1,1EVM2 13N/1,5EVM2 15N/1,5EVM2 18F/2,2 EVM2 22F/2,2 EVM2 26F/3,0EVM4 2N/0,37 EVM4 3N/0,55EVM4 4N/0,75EVM4 5N/1,1EVM4 6N/1,1EVM4 7N/1,5EVM4 8N/1,5EVM4 10N/2,2EVM4 11N/2,2EVM4 12N/2,2EVM4 14N/3,0EVM4 16N/3,0EVM4 19F/4,0EVM4 22F/4,0EVM8 2N/0,75EVM8 3N/1,1EVM8 4N/1,5EVM8 5N/2,2EVM8 6N/2,2EVM8 8N/3,0EVM8 10N/4,0EVM8 11N/4,0EVM8 12N/5,5EVM8 14N/5,5EVM8 15F/5,5EVM8 16F/7,5EVM8 18F/7,5EVM8 20F/7,5EVM16 2F/2,2 EVM16 3F/3,0EVM16 4F/4,0 EVM16 5F/5,5 EVM16 6F/5,5 EVM16 7F/7,5EVM16 8F/7,5 EVM16 10F/11EVM16 12F/11EVM16 14F/15EVM16 15F/15 EVM16 16F/15

717171718080808090909090

10071718080809090909090

1001001121128080909090

10011211213213213213213213290

100112132132132132160160160160160

5050505050505050505075757550505050505050505050505075758080808080808080808080808080909090909090909090909090

1~185185185185214214214214245245245245

-185185214214214245245245245245

----

214214245245245

---------

245-----------

3~208208208208234234234234250250278278303208208234234234250250278278278303303301301234234250278278303301301367367367367367367278303301367367367367

492,5492,5492,5492,5492,5

226247268289320341383425477519607691785240268306334362400428484512550606662771855327357397427457527617647667727757787847907367417457517557597637747827907947987

160160160160160160160160160160250250250160160160160160160160160160160160160250250200200200200200200200200200200280280280280300300300300300300300300300300300300

1~140140140140158158158158178178178178

-140140158158158178178178178178

----

158158178178178

---------

178-----------

3~141141141141159159159159180180180180200141141159159159180180180180180200200221221159159180180180200221221261261261261261261180200221261261261261310310310310310

1~106106106106121121121121131131131131

-106106121121121131131131131131

----

121121131131131

---------

131-----------

3~102102102102110110110110126126126126135102102110110110126126126126126135135146146110110126126126135146146

163,5163,5163,5163,5163,5163,5126135146

163,5163,5163,5163,5208,5208,5208,5208,5208,5

100100100100100100100100100100100100100100100100100100100100100100100100100100100130130130130130130130130130130130130130130130130130130130130130130130130130130

149149149149149149149149149149149149149149149149149149149149149149149149149149149190190190190190190190190190190190190190190190190190190190190190190190190190190

180180180180180180180180180180180180180180180180180180180180180180180180180180180215215215215215215215215215215215215215215215215215215215215215215215215215215

210210210210210210210210210210210210210210210210210210210210210210210210210210210250250250250250250250250250250250250250250250250250250250250250250250250250250

MEC H PL ML G ØI MW BM BL BY1 BW

G1”G1”G1”G1”G1”G1”G1”G1”G1”G1”Ø25Ø25Ø25

G1” 1/4

G1” 1/4

G1” 1/4

G1” 1/4

G1” 1/4

G1” 1/4

G1” 1/4

G1” 1/4

G1” 1/4

G1” 1/4

G1” 1/4

G1” 1/4

Ø32Ø32

G1” 1/2

G1” 1/2

G1” 1/2

G1” 1/2

G1” 1/2

G1” 1/2

G1” 1/2

G1” 1/2

G1” 1/2

G1” 1/2

Ø40Ø40Ø40Ø40Ø50Ø50Ø50Ø50Ø50Ø50Ø50Ø50Ø50Ø50Ø50Ø50

SA

----------

Ø120Ø120Ø120

------------

Ø140Ø140

----------

Ø150Ø150Ø150Ø150Ø165Ø165Ø165Ø165Ø165Ø165Ø165Ø165Ø165Ø165Ø165Ø165

----------

161616------------

1616----------

18181818181818181818181818181818

22222222224442222222222224422222222224444444444444444

M10M10M10M10M10M10M10M10M10M10Ø14Ø14Ø14M10M10M10M10M10M10M10M10M10M10M10M10Ø14Ø14M12M12M12M12M12M12M12M12M12M12Ø19Ø19Ø19Ø19Ø18Ø18Ø18Ø18Ø18Ø18Ø18Ø18Ø18Ø18Ø18Ø18

PG11PG11PG11PG11PG16PG16PG16PG16PG16PG16PG16PG16PG16PG11PG11PG16PG16PG16PG16PG16PG16PG16PG16PG16PG16PG16PG16PG16PG16PG16PG16PG16PG16PG16PG16PG21PG21PG21PG21PG21PG21PG16PG16PG16PG21PG21PG21PG21PG29PG29PG29PG29PG29

solo pompe10,711,412,214,713,614,415,917,320,722,22730

32,911,111,920,817,316,217,218,822

24,525,629,530,529,231,518,619,526,925,227,224,126

26,959,662,86559

60,5613436

38,548,249

51,5536462

70,572,274

1~18,218,920,220,924,625,428,529,939,240,74750-

18,619,923,625,926,735,236

37,538,239,5

----

29,630,538,941,342,3

---------

48-----------

3~17,117,819,520,222,623,426,427,835,737,24548

53,917,519,220,823

23,828,729,535

35,737,542,944,451,253,526,829,232,437,338,344,148

48,960,362,266,874,276,177,944

49,162

63,895,597,598,8138

139,2140,2141,4142,2

75757575757575757575858585757575757575757575757575

100100100100100100100100100100100100110110110110125125125125125125125125125125125125

SE

----------

Ø70Ø70Ø70

------------

Ø78Ø78

----------

Ø88Ø88Ø88Ø88

Ø102Ø102Ø102Ø102Ø102Ø102Ø102Ø102Ø102Ø102Ø102Ø102

SG SF ST SN SD VWeight

kg

DIMENSIONAL TABLE EVM 2-16

1~

13,615,7

--

53

DWOCENTRIFUGAL PUMPS - OPEN IMPELLER in AISI 304

SPECIFICATIONS• Maximum working pressure: 8 bar • Maximum liquid temperature: 90°C • Passage of solids: maximum diameter of 19 mm

MATERIALS• Pump body, casing cover, impeller and shaft in AISI 304 • Bracket and motor casing in cast iron • Mechanical seal in carbon/ceramic/NBR • Special mechanical seal are available on demand



for three-phase version• DNA 2”1/2 for DWO 300-400

DNA 2” for the other models • DNM 2”

Open impeller centrifugal pumps with the hydraulic element manufactured from stainless steel AISI304, suitable for suspended solids handling food process e.g. washing vegetables, meats, and fish.Industrial washing machines that may contain solids e.g. bottles, jars, glasses & crates. Processapplications such as paint plants & general dirty liquid handling. An IP68 submersible is also avail-able.

DIMENSIONAL TABLE


Single-phaseDWO 150 MDWO 200 M

--

Three-phaseDWO 150DWO 200DWO 300DWO 400

364364390415

198,5198,5215,5240,5

62,562,58080

3~

PG11PG11

PG13,5PG13,5

74747878

1~

PG13,5PG13,5

--

G 2G 2

G 21/2

G 21/2

3~

12,614,416,920,0

Weight

B C R Ø P V T Ø DNA kg

54

DWO



DWO 150 MDWO 200 M

--


DWO 150DWO 200DWO 300DWO 400

1,11,52,23,0

6,89,0--

4,46,18,311,0

2,53,54,86,4

9,512,715

17,5

8,912,314,516,9

7,911,513,816,3

6,910,512,915,6

5,18,611,714,3

-5,89,712,4

--

7,59,8

---

7,6

31,540--

450450

--



1006

20012

30018

40024

55033

75042

95057

110066

H=Total head

PERFORMANCE TABLE

CENTRIFUGAL PUMPS - OPEN IMPELLER in AISI 304

55

CMA-B-C-D-CMRCENTRIFUGAL PUMPS - SINGLE IMPELLER in cast iron

SPECIFICATIONS• Maximum working pressure: 6 bar,

8 bar for CMA 1.50-2.00-3.00 – CMB 4.40-5.50 • Maximum liquid temperature:

35°C according EN 60335-2-41 for domestic uses 40°C for CMA 0.50-0.75-0.80-1.0090°C for other models

MATERIALS• Pump body in cast iron • Mechanical seal in carbon/ceramic/NBR• Impeller: - in tecnopolymer for CMA 0.50-0.75-0.80-1.00

- in brass for CMA 1.50-2.00-3.00CMB 2.00-3.00-4.00-5.50CMR 0.75-1.00

- in cast iron for the other models.• Shaft: - in AISI 303 for CMA 0.75-0.80-1.00

1.50-2.00-3.00CMB 1.50-2.00-3.00CMD 1.50-2.00-3.00

- in AISI 304 for CMB 4.00-5.50CMD 4.00

- in AISI 416 for CMA 0.50• Bracket: - in alluminium for CMA 0.50-0.75-0.80-1.00

CMB 0.75-1.00CMC 0.75-1.00CMR 0.75-1.00

- in cast iron for the other models



for three-phase version

Single impeller centrifugal pumps manufactured cast iron, suitable for pressure boosting of water forirrigation, and non-aggressive liquids for civil and industrial uses.CMR series is fitted with an open impeller for suspended solids handling.

56



Single-phaseCMA 0.50 MCMA 0.75 MCMA 0.80 MCMA 1.00 MCMA 1.50 MCMA 2.00 M

-

CMB 0.75 MCMB 1.00 MCMB 1.50 MCMB 2.00 M

---

CMC 0.75 MCMC 1.00 M

CMD 1.50 MCMD 2.00 M

--

CMR 0.75 MCMR 1.00 M

Three-phaseCMA 0.50 TCMA 0.75 TCMA 0.80 TCMA 1.00 TCMA 1.50 TCMA 2.00 TCMA 3.00 T

CMB 0.75 TCMB 1.00 TCMB 1.50 TCMB 2.00 TCMB 3.00 TCMB 4.00 TCMB 5.50 T

CMC 0.75 TCMC 1.00 T

CMD 1.50 TCMD 2.00 TCMD 3.00 TCMD 4.00 T

CMR 0.75 TCMR 1.00 T

160185185185200225225

188188188200200247247

186186

213213213213

180180

261,8300,3300,3300,3347,3360,3360,3

315,3315,3349,3373,3373,3428,8428,8

313,3313,3

384,3397,3397,3449,3

310,3310,3

3036,836,836,841,841,841,8

36,836,836,836,836,84848

36,836,8

36,836,836,836,8

36,836,8

44454545

45,545,545,5

49,549,549,557,557,56060

4343

68686868

4545

158,8171,8171,8171,8208,3208,3208,3

182,3182,3206,3209,3209,3222,3222,3

186,8186,8

222,8222,8222,8234,8

181,8181,8

8999999

999991212

99

12121212

99

202232232232252285285

251,5251,5251,5271,5271,5323,5323,5

247247

271,5271,5271,5271,5

229229

82979797100115115

101,5101,5101,5111,5111,5133,5133,5

9797

111,5111,5111,5111,5

9797

120135135135152170170

150150150160160190190

150150

160160160160

132132

3~

172,5197,5197,5197,5214229229

127127

215,5225,5225,5264,5264,5

197,5197,5

225,5225,5225,5354

197,5197,5

1~

173198198198232247

-

127,5127,5233,5243,5

---

198198

243,5243,5

--

198198

40454545505050

45454545456060

4545

45454545

4545

40404040404040

40404040405050

4040

40404050

4040

110140140140155180180

140140140160160190190

140140

160160160160

140140

A B C D E F H H1 H2 H3 H4 M M1 N

150180180180194220220

180180180200200240240

180180

200200200200

180180

N1 R T V W S DNA DNM

44454545

45,545,545,5

65,565,565,576,576,577,577,5

63,563,5

100,5100,5100,5100,5

60,560,5

1~

PG11PG11PG11PG11

PG13,5PG13,5

-

PG11PG11

PG13,5PG13,5

---

PG11PG11

PG13,5PG13,5

--

PG11PG11

3~

PG11PG11PG11PG11PG11PG11PG11

PG11PG11PG11PG11PG11G 1/2G 1/2

PG11PG11

PG11PG11PG11G1/2

PG11PG11

3036,836,836,841,841,841,8

52,852,852,855,855,865,565,5

57,357,3

69,369,369,369,3

52,352,3

9,59,59,59,59,59,59,5

9,59,59,59,59,51212

9,59,5

9,59,59,59,5

9,59,5

G 1G 1G 1G 1

G 11/4

G 11/4

G 11/4

G 2G 2G 2G 2G 2G 2G 2

G 2G 2

G 21/2

G 21/2

G 21/2

G 21/2

G 11/2

G 11/2

G 1G 1G 1G 1G 1G 1G 1

G 11/4

G 11/4

G 11/4

G 11/4

G 11/4

G 11/4

G 11/4

G 2G 2

G 21/2

G 21/2

G 21/2

G 21/2

G 11/2

G 11/2

7,311,710,712,019,421,322,0

12,513,820,521,521,539,041,0

12,313,0

22,024,024,031,5

11,012,2

Weightkg

57




CMA 0.50 MCMA 0.75 MCMA 0.80 MCMA 1.00 MCMA 1.50 MCMA 2.00 M

-


CMA 0.50 TCMA 0.75 TCMA 0.80 TCMA 1.00 TCMA 1.50 TCMA 2.00 TCMA 3.00 T

0,370,550,60,751,11,52,2

3,24,74,86,28

10,3-

2,43,23,34,35,47,59,5

1,41,81,92,53,14,35,5

2031,528

34,540,54753

17,828,226,132,839,645,851,8

1524

23,830,638,244,250,2

12,118,920,928,236,542,448,3

11,217,520,127,636

41,947,8

10,5-

19,326,935,641,447,3

--

18,526,234,940,946,7

---

25,534,340,346,2

----

3339,245

-----

3843,7

------

41

101616203540-

450450450450450450

-



201,2

402,4

603,6

804,8

855,1

905,4

955,7

1006

1106,6

1207,2

1408,4

H=Total head

PERFORMANCE TABLE

58




CMB 0.75 MCMB 1.00 MCMB 1.50 MCMB 2.00 M

---


CMB 0.75 TCMB 1.00 TCMB 1.50 TCMB 2.00 TCMB 3.00 TCMB 4.00 TCMB 5.50 T

0,550,751,11,52,23,04,0

4,56,08,510,8

---

3,04,55,57,58,312,015,9

1,72,63,24,34,86,99,2

14,218,422,428,734,54554

13,317,421,127,733,743,452,3

1216,119,826,332,141,550,4

10,415,218

24,530,338,448,1

914

17,122,828,836,245,7

--

162127

33,543

1420

31,540---

450450450450

---



1006

1408,4

18011

22013

25015

28017

H=Total head

PERFORMANCE TABLE


59

CMA-B-C-D-CMRCENTRIFUGAL PUMPS - TWIN IMPELLER in cast iron


Pump type kW Capacitor Corrente as. (A) Q=CapacitySingle-phase230V 50Hz

CMC 0.75 MCMC 1.00 MCMR 0.75 MCMR 1.00 M


CMC 0.75 TCMC 1.00 TCMR 0.75 TCMR 1.00 T

0,550,750,550,75

4,25,33,84,85

2,83,52,83,5

1,62,01,62,0

11,413,413,617,3

11,415,4

10,612,6

8,111,5

8,8116,39,6

-8,7

5,98,6

46,8

-5

14201420

450450450450



503

1006

1509

20012

25015

27516,5

35021

40024

45027

H=Total head

PERFORMANCE TABLE

60

CMA-B-C-D-CMRCENTRIFUGAL PUMPS - TWIN IMPELLER in cast iron



CMD 1.50 MCMD 2.00 M

--


CMD 1.50 TCMD 2.00 TCMD 3.00 TCMD 4.00 T

1,11,52,23,0

8,910,8

--

5,97,59,012,3

3,44,35,27,1

10,412,415,417,8

9,911,914,917,3

8,410,513,516,1

68,311,414,2

4,56,810

13,1

-6

9,312,5

--

8,511,8

---

10,4

31,540--

450450

--



30018

40024

60036

80048

90054

95057

100060

110066

H=Total head

PERFORMANCE TABLE

61

CDACENTRIFUGAL PUMPS - TWIN IMPELLER in cast iron

SPECIFICATIONS• Maximum working pressure: 6 bar for CDA 0.75-1.00

10 bar for other models • Maximum liquid temperature:

35°C according EN 60335-2-41 for domestic uses 40°C for CDA 0.75-1.0090°C for other models

MATERIALS• Pump body in cast iron • Mechanical seal in carbon/ceramic/NBR• Impeller: - in tecnopolymer for CDA 0.75-1.00

- in brass for the other models• Shaft: - in AISI 303 for CDA 1.50-2.00-3.00

- in AISI 304 for CDA 4.00-5.50- in AISI 416 for the other models

• Bracket: - in alluminium for CDA 0.75-1.00- in cast iron for the other models

• Casing cover: - in AISI 304 for CDA 0.75-1.00- in cast iron for the other models




Twin impeller centrifugal pumps with hydraulic parts manufactured from cast iron, suitable for irriga-tion and non-aggressive liquids for civil and industrial uses.


Single-phaseCDA 0.75 MCDA 1.00 MCDA 1.50 MCDA 2.00 M

---

Three-phaseCDA 0.75 TCDA 1.00 TCDA 1.50 TCDA 2.00 TCDA 3.00 TCDA 4.00 TCDA 5.50 T

183183209209194228228

336,3336,3394,8410,8410,8467,3467,3

8,38,38,38,38,31212

7373868686

95,595,5

179,8179,8218,3218,3218,3225,3225,3

99999

1212

227227265265265

308,5308,5

9797110110110

133,5133,5

130130155155155175175

1~

197,5197,5224224224

264,5264,5

3~

198198242242

---

42424848485757

40404040405050

140140155155155180180

A B C D E F H H1 H2 H3 H4 M M1 N

180180195195195230230

N1 R T V W S DNA DNM

57,557,565,565,565,571,571,5

1~

PG11PG11

PG13,5PG13,5

---

3~

PG11PG11PG11PG11PG11G 11/2

G 11/2

6,86,8

12,312,312,31212

9,59,59,59,59,51212

G 1G 1

G 11/4

G 11/4

G 11/4

G 11/2

G 11/2

G 1G 1G 1G 1G 1

G 11/4

G 11/4

13,515,025,027,027,042,546,3

Weightkg

62

CDA


CDA 0.75 MCDA 1.00 MCDA 1.50 MCDA 2.00 M

---


CDA 0.75 TCDA 1.00 TCDA 1.50 TCDA 2.00 TCDA 3.00 TCDA 4.00 TCDA 5.50 T

0,550,751,11,52,23,04,0

5,06,18,610,8

---

3,44,05,67,28,813,016,5

2,02,33,34,15,17,59,5

3339,550,860,5

---

30,237

48,858,660,5

--

27,935,247,156,959,367

76,5

1727

38,449,854,164,873,9

-21

33,446,551,663,972,9

--

27,540,348,462,571,8

---

32,544,662

70,5

----

3258

66,8

-----

53,562

-----

4858,3

------

54

16203540---

450450450450

---



201,2

402,4

503

804,8

905,4

1006

1106,6

1408,4

17010,2

19011,4

21012,6

H=Total head

PERFORMANCE TABLE


CENTRIFUGAL PUMPS - TWIN IMPELLER in cast iron

63

3-3L SERIESCENTRIFUGAL PUMPS according EN 733 (ex DIN 24255) STANDARD

SPECIFICATIONS• Maximum working pressure: 10 bar • Liquid temperature: from –10°C to +110°C• 110° C for H version

MATERIALS• Pump body, impeller, casing cover and shaft in

AISI 304 (3 series), in AISI 316L (3L series) • Mechanical seal in carbon/ceramic/NBR for standard version (3 series), in SiC/SiC/FPM (3L series)

• Mechanical seal in carbon/ceramic/Viton for H version • Mechanical seal on SiC/SiC/FPM for HS version

TECHNICAL DATA• Asincronous 2 and 4 poles motor • Insulation class F• Protection degree IP55 • 1~230±10%• 3~230/400V ± 10% 50Hz up to 4kW included,

400/690V ±10% above • Thermal protection to be provided by the user

End suction centrifugal pumps in accordance with EN 733 (ex DIN 24255) made of stainless steelAISI 304 (3 series) and AISI 316L (3L series), applications include water boosting, heating systems,air-conditioning, washing systems and many other industrial applications.WRAS approved pumps are available upon request.

monobloc with extended motor shaft

monobloc with standard motor and flexible coupling

on basement with standard motor and flexible coupling

bareshaft pump

3M

3S

3P

3PF 3SF

3M3LM

3S3LS

3P3LP

3PF3LPF

3SF3LSF

Available in 4 different versions, 2 and 4 poles

64

Pump type3(L)M

kW HP Absorbed Current (A) Q=Capacity

32-125/1.1 (M)32-160/1.5 (M)32-160/2.2 (M)32-200/3.032-200/4.032-200/5.532-200/7.540-125/1.5 (M)40-125/2.2 (M)40-160/3.040-160/4.040-200/5.540-200/7.540-200/1150-125/2.2 (M)50-125/3.050-125/4.050-160/5.550-160/7.550-200/9.250-200/1150-200/1565-125/4.065-125/5.565-125/7.565-160/7.565-160/9.265-160/1165-160/1565-200/1565-200/18.565-200/22

------

10---------------

5.57.51010

12.51520202530

1,11,52,23,04,05,57.51,52,23,04,05,57,5112,23,04,05,57,59,211154

5.57.57.59.2111515

18.522

5,05,98,311,815,6

--

5,98,311,815,9

---

8,311,815,9

---------------

2,93,44,86,89,011,8

-3,44,86,89,211,115,120,04,86,89,211,515,517,422,031,3

----------

-----

6,8-----

6,48,711,6

---

6,69,010,012,718,0

----------

2128

35,542

53,56969-------------------------

18,424,532

37,549,5656519

25,529,538,545,55771------------------

14,119,22731

43,558,358,317,624

27,53744

55,570------------------

12172528

40,5-

55,517

23,52736435570------------------

------

4915,722

25,534,541

53,568,517,520,52631

38,5-------------

------

4414,5212433

39,552,567,51720

25,530,538-------------

-------

13,219,522,532385166

16,319,62530

37,5505670----------

-------

10,316,4202935

47,563

14,918,424

28,5364955692025

30,5-------

-------71317

25,5314459

13,417

22,52735

47,55468

19,424,529,530

34,538,545,551

58,565,5

--------------

11,715,421,525,533,545,55266

18,523,5292934384550

57,565

--------------8

11,817,92230

40,54862

16,521,5272732364348

55,563

---------------8141826344257

14,319,124,525,529,53441

45,553

60,5

230V 400V 690V


1006

22,529,5374455

70,570,520

26,531404758721922

26,53340535972

22,5273232

36,540,54854

60,567

00

20012

30018

33320

----

38-

5316,523

26,535,542,554,569,5

------------------

36022

40024

45027

50030

60036

70042

80048

100060

120072

----------------------

10,715,521

21,526

30,537,54149

56,5

150090

----------------------7

11,716,817,521,526

33,5364452

1800108

-----------------------

10,415,41620

24,53234

42,550,5

1900114

------------------------

1414,518,623

30,532

40,548,5

2000120

--------------------------

1721,529303947

2100126

---------------------------

2027-

3745

2200132

H=Total head

PERFORMANCE TABLE

19,926,5344052

67,567,5

-------------------------

1509


PERFORMANCE CHART at 2900 min-1 (according to ISO 9906 Annex A)

(M) Single-phase

65

CENTRIFUGAL PUMPS according EN 733 (ex DIN 24255) STANDARD3-3L SERIES

PERFORMANCE CHART at 1450 min-1 (according to ISO 9906 Annex A)

PERFORMANCE TABLE

-------------------------

5,5--9

H= Total head5,67,28,710,512

17,3-----------------------

l/min 50m3/h 3

1006

1609,6

20012

25015

30018

35021

40024

50030

60036

65039

80048

95057

100060

105063

110066

120072

0,250,370,370,550,550,750,370,370,550,551,11,11,50,550,551,11,11,51,52,20,550,751,11,11,52,22,22,23

4,96,38

9,311

16,54,56,27,28,511

12,717,8

----------------

3,34,56,77

9,214,6

45,76,77,910,512,317,4

----------------

------

3,65,26,37,510,111,916,94,95,87,79

12,113

17,7---------

------3

4,65,76,99,611,216,24,75,67,58,811,812,717,5

---------

------

2,33,85

6,29

10,415,34,45,47,28,511,512,317,24,86

7,2------

------

1,53

4,35,48,39,414,24,25,26,98,211,111,916,84,65,87

8,19,211,312,413,915,8

-------------

3,84,96,57,810,611,516,44,45,75,88,09

11,112,213,715,6

-------------3

4,15,66,99,510,515,44,05,26,37,48,510,611,613,015,06

-------------2

3,24,55,88

9,1143,54,65,87,081011

12,414,5

--------------------

3,24,45,46,67,79,810,612

14,1

--------------------

2,33,54,55,76,78,89,310,812,9

--------------------

1,42,53,54,65,77,67,89,311,6

---------------------

2,23,24,25,37,27,38,811,1

----------------------

2,83,84,96,86,88,310,6

------------------------

4,56,4-

7,810,1

Pump Type kW HP Q= Capacity

3M

32-125/0.2532-160/0.37R32-160/0.3732-200/0.55R32-200/0.5532-200/0.7540-125/0.37R40-125/0.3740-160/0.55R40-160/0.5540-200/1.1R40-200/1.140-200/1.550-125/0.55R50-125/0.5550-160/1.1R50-160/1.150-200/1.5R50-200/1.550-200/2.265-125/0.5565-125/90.7565-125/1.165-160/1.165-160/1.565-160/2.265-200/2.2R65-200/2.265-200/3.0

0,330,50,50,750,75

10,50,50,750,751,51,52

0,750,751,51,5223

0,751

1,51,523334

66


PERFORMANCE CURVES 3(L)M-3(L)S-3(L)P 32 at 2900 min -1

(according to ISO 9906 Annex A)

67




68




69




70


• Water supply for civil, agricultural and industrial systems• Pressure boosting• Fire-fighting systems• Heating and air-conditioning systems• Irrigation

• Cooling towers• Swimming pools• Washing systems• Emptying

3M-3S-3P 65 Range EnlargementPERFORMANCE CHART

2 Poles - 50 Hz

3M 65 3S 65 3P 65

APPLICATIONS

4 Poles - 50 Hz

71


3M-3S-3P 65 EBARA Advanced Technology

The hydro-forming process toobtain the integrated volute ispatented. The volute offers higherefficiency than circular casingand the absence of a circularwelding guarantees a good cor-rosion resistance.

Casing has been tested to a pres-sure of 14 bar for a test sequence inexcess of 1 million cycles.

High efficiency impeller design -giving efficiencies up to 80%.Bronze or AISI 316 impeller.

Robust structural design -reducing the possible effects ofpipe strain and subsequent cas-ing deformation.

Hydraulically balanced impeller- reducing axial thrust andprolonging bearing life.

“Back Pull Out” design - allowing for the removal ofthe motor/impeller assembly, whilst leaving thecasing in situ.

Standard DIN mechanical seal -allowing for a range of sealmaterials to suit the pumpedmedium.

Casing

3 SERIES PERFORMANCE DATACapacity up to 132 m3/h

Total head up to 72 m

Please contact our Sales Network for complete technical and performance data of the complete range (including 4 poles and 60 Hz versions).

Volute forming Volute

72




73




74




75

SERIE 3-3LCENTRIFUGAL PUMPS according EN 733 (ex DIN 24255) STANDARD



Dimensional table

X

Space fordissassembly

n1

Dimensions (mm) WeightModel Ø Ø Ø n1 Ø Ø Ø Ø Ø Ø H3

3(L)M DNA DNM P1 [1] [2] K1 D1 SA P2 K2 D2 SM H H1 H2 [3] [4] R W N1 M N2 A B C V X kg

32-125/1,1 (M) 50 32 96 4 – 125 165 16 76 100 140 14 252 112 140 122 139 80 70 140 114 190 213 408 231 PG 13,5 110 21,532-160/1,5 (M) 50 32 96 4 – 125 165 16 76 100 140 14 292 132 160 122 139 80 70 190 118 240 254 408 231 PG 13,5 110 24,232-160/2,2 (M) 50 32 96 4 – 125 165 16 76 100 140 14 292 132 160 122 139 80 70 190 118 240 254 408 231 PG 13,5 110 27,332-200/3,0 50 32 96 4 – 125 165 16 76 100 140 14 340 160 180 122 - 80 70 190 119 240 296 433 256 PG 13,5 110 34,932-200/4,0 50 32 96 4 – 125 165 16 76 100 140 14 340 160 180 134 - 80 70 190 119 240 296 458 256 PG 16 110 42,332-200/5,5 50 32 96 4 – 125 165 16 76 100 140 14 340 160 180 153 - 80 70 190 119 240 296 477 276 PG 16 110 53,232-200/7,5 50 32 96 4 – 125 165 16 76 100 140 14 340 160 180 153 - 80 70 190 119 240 296 520 276 PG 16 110 6540-125/1,5 (M) 65 40 116 4 – 145 185 16 81 110 150 14 252 112 140 122 139 80 70 160 114 210 213 408 231 PG 13,5 115 22,340-125/2,2 (M) 65 40 116 4 – 145 185 16 81 110 150 14 252 112 140 122 139 80 70 160 114 210 213 408 231 PG 13,5 115 24,740-160/3,0 65 40 116 4 – 145 185 16 81 110 150 14 292 132 160 122 - 80 70 190 118 240 254 433 255 PG 13,5 115 3040-160/4,0 65 40 116 4 – 145 185 16 81 110 150 14 292 132 160 134 - 80 70 190 118 240 254 458 255 PG 16 115 37,640-200/5,5 65 40 116 4 – 145 185 16 81 110 150 14 340 160 180 153 - 100 70 212 139 265 296 497 278 PG 16 115 54,540-200/7,5 65 40 116 4 – 145 185 16 81 110 150 14 340 160 180 153 - 100 70 212 139 265 296 520 224 PG 16 115 61,640-200/11 65 40 116 4 – 145 185 16 81 110 150 14 340 160 180 181 - 100 70 212 139 265 296 577 224 PG 21 115 73,850-125/2,2 (M) 65 50 116 4 – 145 185 16 96 125 165 16 292 132 160 122 139 100 70 190 138 240 254 428 231 PG 13,5 125 3050-125/3,0 65 50 116 4 – 145 185 16 96 125 165 16 292 132 160 122 - 100 70 190 138 240 254 453 255 PG 13,5 125 31,550-125/4,0 65 50 116 4 – 145 185 16 96 125 165 16 292 132 160 134 - 100 70 190 138 240 254 478 255 PG 16 125 37,650-160/5,5 65 50 116 4 – 145 185 16 96 125 165 16 340 160 180 153 - 100 70 212 139 265 296 497 278 PG 16 125 5450-160/7,5 65 50 116 4 – 145 185 16 96 125 165 16 340 160 180 153 - 100 70 212 139 265 296 520 224 PG 16 125 61,150-200/9,2 65 50 116 4 – 145 185 16 96 125 165 16 360 160 200 181 - 100 70 212 139 265 296 582 239 PG 21 125 67,550-200/11 65 50 116 4 – 145 185 16 96 125 165 16 360 160 200 181 - 100 70 212 139 265 296 582 239 PG 21 125 73,565-125/4 80 65 134 8 4 160 200 18 115 145 185 16 340 160 180 139 - 100 95 212 149,5 280 254 483 253 PG 16 145 4065-125/5,5 80 65 134 8 4 160 200 18 115 145 185 16 340 160 180 150 - 100 95 212 149,5 280 254 496 275 PG 16 145 5265-125/7,5 80 65 134 8 4 160 200 18 115 145 185 16 340 160 180 150 - 100 95 212 149,5 280 254 540 275 PG 16 145 58,565-160/7,5 80 65 134 8 4 160 200 18 115 145 185 16 360 160 200 150 - 100 95 212 149,5 280 296 540 275 PG 16 145 6265-160/9,2 80 65 134 8 4 160 200 18 115 145 185 16 360 160 200 177,5 - 100 95 212 149,5 280 296 593 356 PG 21 145 6765-160/11 80 65 134 8 4 160 200 18 115 145 185 16 360 160 200 177,5 - 100 95 212 149,5 280 296 593 356 PG 21 145 75,6

[1] Standard[2] On request

76


DIMENSIONAL TABLE

3M (3LM) up to 1,1 kW 2 POLES

77


3M (3LM) 15 ÷ 22 kW 2 POLES


Dimensional table

X


Dimensions (mm)Dimensions (mm) WWeighteightModelModel Ø Ø Ø n1 Ø Ø Ø Ø Ø Ø Ø3(L)M3(L)M DNA DNM P1 [1] [2] K1 D1 SA P2 K2 D2 SM H H1 H2 H3 R W N1 M N2 A B L L1 L2 L3 L4 C D F S X kg

50-200/15 65 50 116 4 - 145 185 16 96 125 165 16 360 160 200 222 100 70 212 139 265 296 723,5 254 254 318 65 304 190,5 - - - 125 9665-160/15 80 65 134 8 4 160 200 18 115 145 185 16 360 160 200 222 100 95 212 149,5 280 296 733 254 254 318 65 304 199,5 - - - 145 9365-200/15 80 65 134 8 4 160 200 18 115 145 185 16 405 180 225 222 100 95 250 149,5 320 296 733 - 258 318 60 345 199,5 300 20 20 145 11465-200/18,5 80 65 134 8 4 160 200 18 115 145 185 16 405 180 225 222 100 95 250 149,5 320 296 733 - 258 318 60 345 199,5 300 20 20 145 12765-200/22 80 65 134 8 4 160 200 18 115 145 185 16 405 180 225 222 100 95 250 149,5 320 286 733 - 258 318 60 345 199,5 300 20 20 145 136

DIMENSIONAL TABLE

78


3M4 (3LM4) 4 POLES

Dimensional table

Dimensions (mm)Dimensions (mm)

213254254294294294213213254254294294294254254296296296296296254254254296296296296296296

375395395395395408375375395395428428428415415428428428428478415427427427483483483483483

252292292340340340252252292292340340340292292340340360360360340340340360360360405405405

112132132160160160112112132132160160160132132160160160160160160160160160160160180180180

205222222223223232205205222222232232232222222232232232232256219230230230253253253253253

140160160180180180140140160160180180180160160180180200200200180180180200200200225225225

104117117117117122104104117117122122122117117122122122122134117

123.5123.5123.5123.5139139139139

114118118119119119114114118118115115115114114115115115115115

149,5149,5149,5149,5149,5149,5149,5149,5149,5

140190190190190190160160190190212212212190190212212212212212212212212212212212250250250

190240240240240240210210240240265265265240240265265265265265280280280280280280320320320

80808080808080808080100100100100100100100100100100100100100100100100100100100

1414141414141414141414141416161616161616161616161616161616

165165165165165165185185185185185185185185185185185185185185200200200200200200200200200

A B C H H1 H2 H3 M N1 N2 R S ØD1

1616161616161616161616161616161616161616181818181818181818

SAn1

44444444444444444444888888888

[1]

--------------------444444444

[2]

125125125125125125145145145145145145145145145145145145145145160160160160160160160160160

ØK1

7070707070707070707070707070707070707070959595959595959595

WØP1 ØD2 ØK2 ØP2ØDNA ØDNM

969696969696116116116116116116116116116116116116116116134134134134134134134134134

140140140140140140150150150150150150150165165165165165165165185185185185185185185185185

100100100100100100110110110110110110110125125125125125125125145145145145145145145145145

7676767676768181818181818196969696969696115115115115115115115115115

5050505050506565656565656565656565656565808080808080808080

3232323232324040404040404050505050505050656565656565656565

X

110110110110110110115115115115115115115125125 125 125 125 125 125145145145145145145145145145

15,020,020,025,025,029,315,015,020,020,030,030,032,220,020,030,030,030,030,031,822.927.828.130,832.637.838.538.743.3

WWeighteightkg

X Space fordissassembly

n1 ÿ 18SA

ModelModel3(L)M4

32-125/0.2532-160/0.37R32-160/0.3732-200/0.55R32-200/0.5532-200/0.7540-125/0.37R40-125/0.3740-160/0.55R40-160/0.5540-200/1.1R40-200/1.140-200/1.550-125/0.55R50-125/0.5550-160/1.1R50-160/1.150-200/1.5R50-200/1.550-200/2.265-125/0.5565-125/0.7565-125/1.165-160/1.165-160/1.565-160/2.265-200/2.2R65-200/2.265-200/3.0


DIMENSIONAL TABLE

X


Dimensional table

Dimensions (mm)Dimensions (mm) WWeighteightModelModel Ø Ø Ø Ø Ø Ø Ø Ø H3

3(L)S3(L)S DNA DNM P1 K1 D1 P2 K2 D2 H H1 H2 [1] [2] N1 M N2 A B C X kg

32-125/1,1M 50 32 96 125 165 76 100 140 252 112 140 129 150 140 114 190 213 430 118 110 23,132-160/1,5M 50 32 96 125 165 76 100 140 292 132 160 138 160 190 118 240 254 477 130 110 28,532-160/2,2M 50 32 96 125 165 76 100 140 292 132 160 138 160 190 118 240 254 477 130 110 32,440-125/1,5M 65 40 116 145 185 81 110 150 252 112 140 138 160 160 114 210 213 477 130 115 26,540-125/2,2M 65 40 116 145 185 81 110 150 252 112 140 138 160 160 114 210 213 477 130 115 29,650-125/2,2M 65 50 116 145 185 95 125 165 292 132 160 138 160 190 138 240 254 497 130 125 32,9

X


Dimensional table

[1] Only for three-phase[2] Only for mono-phase


Dimensions (mm)Dimensions (mm) WeightModel Ø Ø Ø n1 Ø Ø Ø Ø Ø Ø

3(L)S DNA DNM P1 [1] [2] K1 D1 SA P2 K2 D2 SM H H1 H2 H3 R W N1 M N2 A B L1 L2 L3 P X kg

32-200/3,0 50 32 96 4 - 125 165 16 76 100 140 14 340 160 180 145 80 70 190 119 240 294 528 160 202 42 63 110 43,432-200/4,0 50 32 96 4 - 125 165 16 76 100 140 14 340 160 180 161 80 70 190 119 240 294 550 190 228 38 70 110 45,965-125/4,0 80 65 134 8 4 160 200 18 115 145 185 16 340 160 180 161 100 95 212 149,5 280 254 615 190 228 38 70 145 47

79


3S (3LS) up to 2,2 kW 2 POLES

3S (3LS) 3 ÷ 4 kW 2 POLES

DIMENSIONAL TABLE

DIMENSIONAL TABLE

X


Dimensional tableDimensional table


Dimensions (mm)Dimensions (mm) WWeighteightModel Ø Ø Ø n1 Ø Ø Ø Ø Ø Ø

3(L)S3(L)S DNA DNM P1 [1] [2] K1 D1 SA P2 K2 D2 SM H H1 H2 H3 R W B C F X kg

40-200/11 65 40 115 4 - 145 185 16 80 110 150 14 382 160 180 250 100 110 801 198 836 115 10750-200/11 65 50 115 4 - 145 185 16 95 125 165 16 402 160 200 250 100 110 801 198 836 125 10750-200/15 65 50 115 4 - 145 185 16 95 125 165 16 402 160 200 250 100 110 801 198 836 125 13165-160/11 80 65 134 8 4 160 200 18 115 145 185 16 402 160 200 246 100 122,5 801 198 849 145 7665-160/15 80 65 134 8 4 160 200 18 115 145 185 16 402 160 200 246 100 122,5 811 208 859 145 104

80


3S (3LS) 11 ÷ 15 kW 2 POLES

DIMENSIONAL TABLE

X


Dimensions (mm) WeightModelModel Ø Ø Ø n1 Ø Ø Ø Ø Ø

3(L)S DNA DNM P1 [1] [2] K1 D1 SA P2 K2 D2 SM H H1 H2 H3 H4 R W N1 M N2 A B C D F L L1 L2 L3 G Q P X kg

32-200/5,5 50 32 96 4 - 125 165 16 76 100 140 14 340 160 180 205 28 80 70 190 119 240 300 615 165 314 15 - 216 266 50 270 12 - 110 62,832-200/7,5 50 32 96 4 - 125 165 16 76 100 140 14 340 160 180 205 28 80 70 190 119 240 300 615 165 314 15 - 216 266 50 270 12 - 110 74,640-160/3,0 65 40 116 4 - 145 185 16 81 110 150 14 292 132 160 145 32 80 70 190 118 240 254 528 142 246 15 - 160 200 40 220 12 - 115 3940-160/4,0 65 40 116 4 - 145 185 16 81 110 150 14 292 132 160 161 20 80 70 190 118 240 254 550 142 253 15 - 190 240 50 220 12 - 115 41,540-200/5,5 65 40 116 4 - 145 185 16 81 110 150 14 340 160 180 205 28 100 70 212 139 265 300 635 165 314 15 - 216 266 50 270 12 - 115 63,240-200/7,5 65 40 116 4 - 145 185 16 81 110 150 14 340 160 180 205 28 100 70 212 139 265 300 635 165 314 15 - 216 266 50 270 12 - 115 69,650-125/3,0 65 50 116 4 - 145 185 16 96 125 165 16 292 132 160 145 32 100 70 190 138 240 254 548 142 246 15 - 160 200 40 220 12 - 125 4250-125/4,0 65 50 116 4 - 145 185 16 96 125 165 16 292 132 160 161 20 100 70 190 138 240 254 570 142 253 15 - 190 240 50 220 12 - 125 42,550-160/5,5 65 50 116 4 - 145 185 16 96 125 165 16 340 160 180 205 28 100 70 212 139 265 300 635 165 314 15 - 216 266 50 270 12 - 125 63,850-160/7,5 65 50 116 4 - 145 185 16 96 125 165 16 340 160 180 205 28 100 70 212 139 265 300 635 165 314 15 - 216 266 50 270 12 - 125 69,650-200/9,2 65 50 116 4 - 145 185 16 96 125 165 16 360 160 200 205 28 100 70 212 139 265 300 673 165 314 15 - 216 266 50 270 12 - 125 79,765-125/5,5 80 65 134 8 4 160 200 18 115 145 185 16 340 160 180 198 28 100 95 212 149,5 280 300 635 165 314 15 - 216 266 50 270 12 - 145 6065-125/7,5 80 65 134 8 4 160 200 18 115 145 185 16 340 160 180 198 28 100 95 212 149,5 280 300 635 165 314 15 - 216 266 50 270 12 - 145 6765-160/7,5 80 65 134 8 4 160 200 18 115 145 185 16 360 160 200 198 28 100 95 212 149,5 280 300 635 165 314 15 - 216 266 50 270 12 - 145 7065-160/9,2 80 65 134 8 4 160 200 18 115 145 185 16 360 160 200 198 28 100 95 212 149,5 280 300 673 165 314 15 - 216 266 50 270 12 - 145 7765-200/15 80 65 134 8 4 160 200 18 115 145 185 16 405 180 225 246 20 100 95 250 149,5 320 350 811 208 413 20 - 254 314 60 350 14 - 145 12865-200/18,5 80 65 134 8 4 160 200 18 115 145 185 16 405 180 225 246 20 100 95 250 149,5 320 350 855 208 413 20 - 254 314 60 350 14 - 145 14165-200/22 80 65 134 8 4 160 200 18 115 145 185 16 405 180 225 266 - 100 95 250 149,5 320 350 910 208 - - 241 279 330 83 - - 121 145 160


81

3S (3LS) 2 POLES


DIMENSIONAL TABLE

X

SA W


n1 ÿ18

15

Dimensional tableModel3(L)S4

Dimensions (mm)

213254254296296296213213254254294294294254254296296296296254254254296296

401401401435435435401401435435487487512452452487487512512450450497497497

8881010108810101010101010101010101010101010

252292292340340252252292292340340340292292340340360360360340340340360360

108108108118118118118118118118130130130118118130130130130118118130130130

112132132160160160112112132132160160160132132160160160160160160160160160

140160160180180180180140140160160180180160160180180200200180180180200200

112112112140140140112112140140140140140140140140140140140140140140140140

140140140168168168140140168168168168168168168168168168168168168168168168

114118118119119119114114118118115115115114114115115115115

149.5149.5149.5149.5149.5

140190190190190190160160190190212212212190190212212212212212212212212212

190240240240240240210210210210265265265240240265265265265280280280280280

80808080808080808080

100100100100100100100100100100100100100100

141414141414141414141414141616161616161616161616

A B C D H H1 H2 L1 L2 M N1 N2 R S

707070707070707070707070707070707070709595959595

W

454545565656454556565656565656565656565656565656

TØD1 ØK1 ØP1 ØD2 ØK2 ØP2

165165165165165165185185185185185185185185185185185185185200200200200200

125125125125125125145145145145145145145145145145145145145160160160160160

SA

161616161616161616161616161616161616161818181818

969696969696

116116116116116116116116116116116116116134134134134134

140140140140140140150150150150150150150150150150150150150185185185185185

NI

444444444444444444488888

100100100100100100110110110110110110110125125125125125125145145145145145

76767676767681818181818181969696969696115115115115115

ØDNA

505050505050656565656565656565656565658080808080

ØDNM n1

323232323232404040404040405050505050506565656565

-------------------44444

444444444444444444488888

X

110110110110110110115115115115115115115125125125125125125145145145145145

Weightkg

15,520,720,728,928,930,117,617,623,223,233,333,335,523,523,534,034,030,030,024.82630

34.135.2

32-125/0.2532-160/0.37R32-160/0.3732-200/0.55R32-200/0.5532-200/0.7540-125/0.37R40-125/0.3740-160/0.55R40-160/0.5540-200/1.1R40-200/1.140-200/1.550-125/0.55R50-125/0.5550-160/1.1R50-160/1.150-200/1.5R50-200/1.565-125/0.5565-125/0.7565-125/1.165-160/1.165-160/1.5

[1] [2]


82


3S4 (3LS4) UP TO 1,5 kW 4 POLES

DIMENSIONAL TABLE

555

100 63

16

43

160

202

Dimensions (mm) WeightModel Ø Ø n1 Ø Ø Ø Ø Ø Ø

3(L)S DNA DNM [1] [2] P1 K1 D1 SA P2 K2 D2 H H1 H2 W N1 N2 M A kg

50-200/2.2 65 50 4 - 116 145 185 16 96 125 165 360 160 200 70 212 265 139 296 42,865-160/2.2 80 65 8 4 134 160 200 18 115 145 185 360 160 200 95 212 280 149,5 296 43,765-200/2.2R 80 65 8 4 134 160 200 18 115 145 185 405 180 225 95 250 320 149,5 296 44,865-200/2.2 80 65 8 4 134 160 200 18 115 145 185 405 180 225 95 250 320 149,5 296 4565-200/3.0 80 65 8 4 134 160 200 18 115 145 185 405 180 225 95 250 320 149,5 296 48,2

83

3-3L SERIES3S4 (3LS4) 2,2 ÷ 3 kW 4 POLES

DIMENSIONAL TABLE

DIMENSIONAL T

Dimensions (mm) Weight

Model Ø Ø n1 Ø Ø Ø Ø Ø H33(L)P DNA DNM P1 [1] [2] K1 D1 SA P2 K2 D2 SM H H1 H2 [3] [4] R A B B1 D E N1 N2 N3 T kg

32-125/1,1 (M) 50 32 95 4 – 125 165 16 75 100 140 14 302 112 140 129 150 80 213 715 272 80 550 300 340 250 710 43,532-160/1,5 (M) 50 32 95 4 – 125 165 16 75 100 140 14 342 132 160 138 160 80 254 760 317 80 590 350 390 300 750 5132-160/2,2 (M) 50 32 95 4 – 125 165 16 75 100 140 14 342 132 160 138 160 80 254 760 317 80 590 350 390 300 750 53,5

32-200/3 50 32 95 4 – 125 165 16 75 100 140 14 390 160 180 145 – 80 296 809 366 80 590 350 390 300 750 6832-200/4 50 32 95 4 – 125 165 16 75 100 140 14 390 160 180 161 – 80 296 831 388 80 590 350 390 300 750 72

32-200/5,5 50 32 95 4 – 125 165 16 75 100 140 14 390 160 180 198 – 80 296 893 450 100 650 350 390 300 850 8832-200/7,5 50 32 95 4 – 125 165 16 75 100 140 14 390 160 180 198 – 80 296 893 450 100 650 350 390 300 820 99,8

40-125/1,5 (M) 65 40 115 4 – 145 185 16 80 110 150 14 302 112 140 138 160 80 213 760 317 80 550 300 340 250 710 48,540-125/2,2 (M) 65 40 115 4 – 145 185 16 80 110 150 14 302 112 140 138 160 80 213 760 317 80 550 300 340 250 710 51

40-160/3 65 40 115 4 – 145 185 16 80 110 150 14 342 132 160 145 – 80 254 809 366 80 590 350 390 300 750 77,540-160/4 65 40 115 4 – 145 185 16 80 110 150 14 342 132 160 161 – 80 254 831 388 80 590 350 390 300 750 64,5

40-200/5,5 65 40 115 4 – 145 185 16 80 110 150 14 390 160 180 198 – 100 296 913 450 100 650 350 390 300 850 8940-200/7,5 65 40 115 4 – 145 185 16 80 110 150 14 390 160 180 198 – 100 296 913 450 100 650 350 390 300 850 94,540-200/11 65 40 115 4 – 145 185 16 80 110 150 14 390 160 180 246 – 100 296 1076 613 100 800 380 420 330 1000 117

50-125/2,2 (M) 65 50 115 4 – 145 185 16 95 125 165 16 342 132 160 138 160 100 254 780 317 80 590 350 390 300 750 13250-125/3 65 50 115 4 – 145 185 16 95 125 165 16 342 132 160 145 – 100 254 829 366 80 590 350 390 300 750 7950-125/4 65 50 115 4 – 145 185 16 95 125 165 16 342 132 160 161 – 100 254 851 388 80 590 350 390 300 750 81,5

50-160/5,5 65 50 115 4 – 145 185 16 95 125 165 16 390 160 180 198 – 100 296 913 450 100 650 350 390 300 850 8950-160/7,5 65 50 115 4 – 145 185 16 95 125 165 16 390 160 180 198 – 100 296 913 450 100 650 350 390 300 850 94,550-200/9,2 65 50 115 4 – 145 185 16 95 125 165 16 410 160 200 198 – 100 296 951 488 100 650 350 390 300 850 10050-200/11 65 50 115 4 – 145 185 16 95 125 165 16 410 160 200 246 – 100 296 1076 613 100 800 380 420 330 1000 117,550-200/15 65 50 115 4 – 145 185 16 95 125 165 16 410 160 200 246 – 100 296 1076 613 100 800 380 420 330 1000 125,465-125/4 80 65 134 8 4 160 200 18 115 145 185 16 390 160 180 161 – 100 254 851 388 80 590 350 390 300 750 82

65-125/5,5 80 65 134 8 4 160 200 18 115 145 185 16 390 160 180 198 – 100 254 913 450 100 650 350 390 300 850 9065-125/7,5 80 65 134 8 4 160 200 18 115 145 185 16 390 160 180 198 – 100 254 913 450 100 650 350 390 300 850 9765-160/7,5 80 65 134 8 4 160 200 18 115 145 185 16 410 160 200 198 – 100 296 913 450 100 650 350 390 300 850 10365-160/9,2 80 65 134 8 4 160 200 18 115 145 185 16 410 160 200 198 – 100 296 951 450 100 650 350 390 300 850 10765-160/11 80 65 134 8 4 160 200 18 115 145 185 16 410 160 200 246 – 100 296 1076 613 100 800 380 420 330 1000 11465-160/15 80 65 134 8 4 160 200 18 115 145 185 16 410 160 200 246 – 100 296 1076 613 100 800 380 420 330 1000 11965-200/15 80 65 134 8 4 160 200 18 115 145 185 16 455 180 225 246 – 100 296 1076 613 100 800 380 420 330 1000 127

65-200/18,5 80 65 134 8 4 160 200 18 115 145 185 16 455 180 225 246 – 100 296 1120 657 100 800 380 420 330 1000 13965-200/22 80 65 134 8 4 160 200 18 115 145 185 16 455 180 225 266 – 100 296 1175 712 100 800 410 450 360 1000 182


84


3P (3LP) 2 POLES

DIMENSIONAL TABLE

n1 ÿ18

Model3(L)P4

Dimensions (mm)

32-125/0.2532-160/0.37R32-160/0.3732-200/0.55R32-200/0.5532-200/0.7540-125/0.37R40-125/0.3740-160/0.55R40-160/0.5540-200/1.1R40-200/1.140-200/1.550-125/0.55R50-125/0.5550-160/1.1R50-160/1.150-200/1.5R50-200/1.550-200/2.265-125/0.5565-125/0.7565-125/1.165-160/1.165-160/1.565-160/2.265-200/2.2R65-200/2.265-200/3.0

213254254296296296213213254254296296296254254296296296296296254254254296296296296296296

683683683717717717683683717717795795795737737795795795795863735735780780780829829829829

250300300300300300250250300300300300300300300300300300300300300300300300300300330330330

302342342390390390302302342342390390390342342390390410410410390390390410410410455455455

550510510510510510550550510590590590510510590590590590590590510510590590590590590590590

162182182210210210162162182182210210210182182210210210210210160160160160160160180180180

140160160180180180140140160160180180180160160180180200200200180180180200200200225225225

300350350350350350300300350350350350350350350350350350350350350350350350350350380380380

340390390390390390340340390390390390390390390390390390390390390390390390390390420420420

8080808080808080808080808080808080808080808080808080808080

8080808080808080808080808080808080808080100100100100100100100100100

240240240274274274240240274274332332332274274332332332332400272272317317317366366366366

710670670670670670710710670670750750750670670750750750750750670670750750750750750750750

1414141414141414141414141416161616161616161616161616161616

A B E F H H1 H2 N1 N2 X Y R TS ØD1 ØK1 ØP1 ØD2 ØK2 ØP2ØDNA ØDNM

165165165165165165185185185185185185185185185185185185185185200200200200200200200200200

125125125125125125145145145145145145145145145145145145145145185185185185185185185185185

959595959595115115115115115115115115115115115115115115134134134134134134134134134

140140140140140140150150150150150150150165165165165165165165185185185185185185185185185

100100100100100100110110110110110110110125125125125125125125145145145145145145145145145

7575757575758080808080808095959595959595115115115115115115115115115

5050505050506565656565656565656565656565808080808080808080

3232323232324040404040404050505050505050656565656565656565

[1]

44444444444444444444888888888

[2]

--------------------444444444

37,041,041,053,553,554,546,546,544,544,561,561,564,045,045,052,552,564,064,070

48,649,856,162,663,771,574,174,277,5

Weightkg


n1

85


3P (3LP) 4 POLES

DIMENSIONAL TABLE

Model3(L)SF

Dimensions (mm)

32-125/1,132-160/1,532-160/2,232-200/332-200/432-200/5,532-200/7,540-125/1,540-125/2,240-160/340-160/440-200/5,540-200/7,540-200/1150-125/2,250-125/350-125/450-160/5,550-160/7,550-200/9,250-200/1150-200/15

213254254294294294294213213254254294294294254254254296296296296296

118130130142142165165130130142142165165198142142142165165165198198

252292292340340340340252252292292340340340292292292340340360360360

112132132160160160160112112132132160160160132132132160160160160160

165165165215215265265165165215215265265300215215215265265265300300

140160160180180180180140140160160180180180160160160180180200200200

M10M10M10M12M12M12M12M10M10M12M12M12M12M16M12M12M12M12M12M12M16M16

114118118119119119119114114118118115115115114114114115115115115115

140190190190190190190160160190190212212212190190190115115212212212

190240240240240240240210210240240265265265240240240212212265265265

29292929292929292929292525252525252525252525

808080808080808080808080

100100100100100100100390390390

14141414141414141414141414141616161616161616

165165165165165165165185185185185185185185185185185185185185185185

A C E H H1 H2 L M N1 N2 P R SØD1

125125125125125125125145145145145145145145145145145145145145145145

ØK1 ØP1 ØD2 ØK2 ØP2ØDNA ØDNM

96969696969696116116116116116116116116116116116116116116116

140140140140140140140150150150150150150150165165165165165165165165

100100100100100100100110110110110110110110125125125125125125125125

76767676767676818181818181819696969696969696

50505050505050656565656565656565656565656565

32323232323232404040404040405050505050505050

Model3(L)SF4

Dimensions (mm)

32-125/0,2532-160/0,37R32-160/0,3732-200/0,55R32-200/0,5532-200/0,7540-125/0,37R40-125/0,3740-160/0,55R40-160/0,5540-200/1,1R40-200/1,140-200/1,550-125/0,55R50-125/0,5550-160/1,1R50-160/1,150-200/1,5R50-200/1,550-200/2,2

213254254296296296213213254254294294294254254296296296296296

108108108118118118118118118118130130130118118130130130130130

252292292340340340252252292292340340340292292340340360360360

112132132160160160112112132132160160160132132160160160160160

130130130165165165130130165165165165165165165165165165165215

140160160180180180140140160160180180180160160180180200200200

M8M8M8M10M10M10M8M8M10M10M10M10M10M10M10M10M10M10M10M12

114118118119119119114114118118115115115114114115115115115115

140190190190190190160160190190212212212190190115115212212212

190240240240240240210210240240265265265240240212212265265265

2929292929292929292925252525252525252525

80808080808080808080

100100100100100100100100100100

1414141414141414141414141416161616161616

165165165165165165185185185185185185185185185185185185185185

A C E H H1 H2 L M N1 N2 P R SØD1

125125125125125125145145145145145145145145145145145145145145

ØK1 ØP1 ØD2 ØK2 ØP2ØDNA ØDNM

969696969696116116116116116116116116116116116116116116

140140140140140140150150150150150150150165165165165165165165

100100100100100100110110110110110110110125125125125125125125

7676767676768181818181818196969696969696

5050505050506565656565656565656565656565

3232323232324040404040404050505050505050

86


3SF - 3SF4 (3LSF - 3LSF4) 2 POLES

3SF4 (3LSF4) 4 POLES

DIMENSIONAL TABLE

DIMENSIONAL TABLE

Model3(L)PF

Dimensions (mm)

32-12532-16032-20040-12540-16040-20050-12550-16050-200

213254296213254296254296296

440440440440440460460460460

112132160112132160132160160

140160180140160180160180200

252292340252292340292340360

114118119114118115114115115

140190190160190212190212212

190240240210240265240265265

292929292925252525

8080808080100100100100

141414141414161616

165165165185185185185185185

125125125145145145145145145

959595

115115115115115115

A B H H1 H2 M N1 N2 P R SØD1 ØK1 ØP1

140140140150150150165165165

ØD2 ØK2 ØP2ØDNA ØDNM

100100100110110110125125125

757575808080959595

505050656565656565

323232404040505050

18,020,028,518,020,029,020,029,029,5

Weightkg

87


3(L)PF

DIMENSIONAL TABLE

88


4 POLES

Dimensional table 2 POLES

Motor Dimensions (mm)3S4 X

kW HP Size Type d1 d2 d3 L3 M Size Standard h S E

32-125/N 0,25 0,33 71 B5 19 14 28 33 M16 x 1,5 M5 x 6 UNI 5929 16,3 5 8832-160/R 0,37 0,5 71 B5 19 14 28 33 M16 x 1,5 M5 x 6 UNI 5929 16,3 5 8832-160/N 0,37 0,5 71 B5 19 14 28 33 M16 x 1,5 M5 x 6 UNI 5929 16,3 5 8832-200/R 0,55 0,75 80 B5 19 19 33 43 M16 x 1,5 M6 x 6 UNI 5929 21,8 6 9832-200/N 0,55 0,75 80 B5 19 19 33 43 M16 x 1,5 M6 x 6 UNI 5929 21,8 6 9832-200/L 0,75 1 80 B5 19 19 33 43 M16 x 1,5 M6 x 6 UNI 5929 21,8 6 9840-125/R 0,37 0,5 71 B5 19 14 28 33 M16 x 1,5 M5 x 6 UNI 5929 16,3 5 8840-125/N 0,37 0,5 71 B5 19 14 28 33 M16 x 1,5 M5 x 6 UNI 5929 16,3 5 8840-160/R 0,55 0,75 80 B5 19 19 33 43 M16 x 1,5 M6 x 6 UNI 5929 21,8 6 9840-160/N 0,55 0,75 80 B5 19 19 33 43 M16 x 1,5 M6 x 6 UNI 5929 21,8 6 9840-200/R 1,1 1,5 90 B5 19 24 39 53 M16 x 1,5 M8 x 8 UNI 5929 27,3 8 11040-200/N 1,1 1,5 90 B5 19 24 39 53 M16 x 1,5 M8 x 8 UNI 5929 27,3 8 11040-200/L 1,5 2 90 B5 19 24 39 53 M16 x 1,5 M8 x 8 UNI 5929 27,3 8 11050-125/R 0,55 0,75 80 B5 19 19 33 43 M16 x 1,5 M6 x 6 UNI 5929 21,8 6 9850-125/N 0,55 0,75 80 B5 19 19 33 43 M16 x 1,5 M6 x 6 UNI 5929 21,8 6 9850-160/R 1,1 1,5 90 B5 19 24 39 53 M16 x 1,5 M8 x 8 UNI 5929 27,3 8 11050-160/N 1,1 1,5 90 B5 19 24 39 53 M16 x 1,5 M8 x 8 UNI 5929 27,3 8 11050-200/R 1,5 2 90 B5 19 24 39 53 M16 x 1,5 M8 x 8 UNI 5929 27,3 8 11050-200/N 1,5 2 90 B5 19 24 39 53 M16 x 1,5 M8 x 8 UNI 5929 27,3 8 11050-200/L 2,2 3 100 B35 22 28 43 63 M18 x 1,5 M8 x 8 UNI 5929 31,3 8 153

3S

Motor Dimensions (mm)Pump Type X

kW HP Size Type d1 d2 d3 L3 M Size Standard h S E

32-125/N 1,1 1,5 80 B5 19 33 19 43 16 x 1,5 M6 x 6 UNI 5929 21,8 6 9832-160/R 1,5 2 90 B5 19 39 24 53 16 x 1,5 M8 x 8 UNI 5929 27,3 8 11032-160/N 2,2 3 90 B5 19 39 24 53 16 x 1,5 M8 x 8 UNI 5929 27,3 8 11032-200/R 3 4 100 B35 19 43 28 63 16 x 1,5 M8 x 8 UNI 5929 31,3 8 12232-200/N 4 5,5 112 B35 19 43 28 63 16 x 1,5 M8 x 8 UNI 5929 31,3 8 12232-200/L 5,5 7,5 132 B35 19 58 38 84 16 x 1,5 M8 x 8 UNI 5929 41,3 10 14532-200/EL 7,5 10 132 B35 19 58 38 84 16 x 1,5 M8 x 8 UNI 5929 41,3 10 14540-125/R 1,5 2 90 B5 19 39 24 53 16 x 1,5 M8 x 8 UNI 5929 27,3 8 11040-125/N 2,2 3 90 B5 19 39 24 53 16 x 1,5 M8 x 8 UNI 5929 27,3 8 11040-160/R 3 4 100 B35 19 43 28 63 16 x 1,5 M8 x 8 UNI 5929 31,3 8 12240-160/N 4 5,5 112 B35 19 43 28 63 16 x 1,5 M8 x 8 UNI 5929 31,3 8 12240-200/R 5,5 7,5 132 B35 19 58 38 84 16 x 1,5 M8 x 8 UNI 5929 41,3 10 14540-200/N 7,5 10 132 B35 19 58 38 84 16 x 1,5 M8 x 8 UNI 5929 41,3 10 14540-200/L 11 15 160 B35 19 63 42 114 16 x 1,5 M8 x 8 UNI 5929 45,3 12 17850-125/S 2,2 3 90 B5 19 39 24 53 16 x 1,5 M8 x 8 UNI 5929 27,3 8 11050-125/R 3 4 100 B35 19 43 28 63 16 x 1,5 M8 x 8 UNI 5929 31,3 - 12250-125/N 4 5,5 112 B35 19 43 28 63 16 x 1,5 M8 x 8 UNI 5929 31,3 - 12250-160/R 5,5 7,5 132 B35 19 58 38 84 16 x 1,5 M8 x 8 UNI 5929 41,3 10 14550-160/N 7,5 10 132 B35 19 58 38 84 16 x 1,5 M8 x 8 UNI 5929 41,3 10 14550-200/R 9,2 12,5 132 B35 19 58 38 84 16 x 1,5 M8 x 8 UNI 5929 41,3 10 14550-200/N 11 15 160 B35 19 63 42 114 16 x 1,5 M8 x 8 UNI 5929 45,3 12 17850-200/L 15 20 160 B35 22 63 42 114 18 x 1,5 M8 x 8 UNI 5929 45,3 12 20965-125/R 4 5,5 112 B35 19 28 43 63 16 x 1,5 M8 x 8 UNI 5929 31,3 8 12265-125/N 5,5 7,5 132 B35 19 38 58 84 16 x 1,5 M8 x 8 UNI 5929 41,3 10 14565-125/L 7,5 10 132 B35 19 38 58 84 16 x 1,5 M8 x 8 UNI 5929 41,3 10 14565-160/S 7,5 10 132 B35 19 38 58 84 16 x 1,5 M8 x 8 UNI 5929 41,3 10 14565-160/R 9,2 12,5 132 B35 19 38 58 84 16 x 1,5 M8 x 8 UNI 5929 41,3 10 14565-160/N 11 15 160 B35 19 42 63 114 16 x 1,5 M8 x 8 UNI 5929 45,3 12 17865-160/L 15 20 160 B35 24 42 63 114 20 x 1,5 M8 x 8 UNI 5929 45,3 12 18465-200/R 15 20 160 B35 24 42 63 114 20 x 1,5 M8 x 8 UNI 5929 45,3 12 18465-200/N 18,5 25 160 B35 24 42 63 114 20 x 1,5 M8 x 8 UNI 5929 45,3 12 18465-200/L 22 30 180 B35 24 48 72 114 20 x 1,5 M10 x 10 UNI 5929 51,8 14 184

DIMENSIONAL TABLE 2 POLES

DIMENSIONAL TABLE 4 POLES

3S (3LS) Series coupling

Motor Dimensions (mm)3(L)P4

kW HP Size Type D H1 H2

32-125/0,25 0,25 0,33 71 B3 14 16,3 532-160/0,37R 0,37 0,5 71 B3 14 16,3 532-160/0,37 0,37 0,5 71 B3 14 16,3 532-200/0,55R 0,55 0,75 80 B3 19 21,8 632-200/0,55 0,55 0,75 80 B3 19 21,8 632-200/0,75 0,75 1 80 B3 19 21,8 640-125/0,37R 0,37 0,5 71 B3 14 16,3 540-125/0,37 0,37 0,5 71 B3 14 16,3 540-160/0,55R 0,55 0,75 80 B3 19 21,3 640-160/0,55 0,55 0,75 80 B3 19 21,3 640-200/1,1R 1,1 1,5 90 B3 24 27,3 840-200/1,1 1,1 1,5 90 B3 24 27,3 840-200/1,5 1,5 2 90 B3 24 27,3 850-125/0,55R 0,55 0,75 80 B3 19 21,3 650-125/0,55 0,55 0,75 80 B3 19 21,3 650-160/1,1R 1,1 1,5 90 B3 24 27,3 850-160/1,1 1,1 1,5 90 B3 24 27,3 850-200/1,5R 1,5 2 90 B3 24 27,3 850-200/1,5 1,5 2 90 B3 24 27,3 850-200/2,2 2,2 3 100 B3 28 31,3 865-125/0,55 0,55 0,75 80 B3 19 21,8 665-125/0,75 0,75 1,0 80 B3 19 21,8 665-125/1,1 1,1 1,5 90 B3 24 27,3 865-160/1,1 1,1 1,5 90 B3 24 27,3 865-160/1,5 1,5 2,0 90 B3 24 27,3 865-160/2,2 2,2 3,0 100 B3 28 31,3 865-200/2,2R 2,2 3,0 100 B3 28 31,3 865-200/2,2 2,2 3,0 100 B3 28 31,3 865-200/3,0 3,0 4,0 100 B3 28 31,3 8

89

PUMP SIDE MOTOR SIDE

3(L)P Series coupling


DIMENSIONAL TABLEMotor Dimensions (mm)

Pump typekW HP Size Type D H1 H2

32-125/1,1 1,1 1,5 80 B3 19 21,8 632-160/1,5 1,5 2 90 B3 24 27,3 832-160/2,2 2,2 3 90 B3 24 27,3 832-200/3,0 3 4 100 B3 28 31,3 832-200/4,0 4 5,5 112 B3 28 31,3 832-200/5,5 5,5 7,5 132 B3 38 41,3 1032-200/7,5 7,5 10 132 B3 38 41,3 1040-125/1,5 1,5 2 90 B3 24 27,3 840-125/2,2 2,2 3 90 B3 24 27,3 840-160/3,0 3 4 100 B3 28 31,3 840-160/4,0 4 5,5 112 B3 28 31,3 840-200/5,5 5,5 7,5 132 B3 38 41,3 1040-200/7,5 7,5 10 132 B3 38 41,3 1040-200/11 11 15 160 B3 42 45,3 1250-125/2,2 2,2 3 90 B3 24 27,3 850-125/3,0 3 4 100 B3 28 31,3 850-125/4,0 4 5,5 112 B3 28 31,3 850-160/5,5 5,5 7,5 132 B3 38 41,3 1050-160/7,5 7,5 10 132 B3 38 41,3 1050-200/9,2 9,2 12,5 132 B3 38 41,3 1050-200/11 11 15 160 B3 42 45,3 1250-200/15 15 20 160 B3 42 45,3 1265-125/4,0 4 5,5 112 B3 28 31,3 865-125/5,5 5,5 7,5 132 B3 38 41,3 1065-125/7,5 7,5 10 132 B3 38 41,3 1065-160/7,5 7,5 10 132 B3 38 41,3 1065-160/9,2 9,2 12,5 132 B3 38 41,3 1065-160/11 11 15 160 B3 42 45,3 1265-160/15 15 20 160 B3 42 45,3 1265-200/15 15 20 160 B3 42 45,3 1265-200/18,5 18,5 25 160 B3 42 45,3 1265-200/22 22 30 180 B3 48 51,8 14

3(L)P

90

MD-MMDCENTRIFUGAL PUMPS according EN 733 (ex DIN 24255) STANDARD in cast iron


90°C (MD)-10°C÷+130°C (MMD)

MATERIALS• Pump body and bracket in cast iron • Shaft in AISI 304• Mechanical seal in carbon/ceramic/NBR (MD)

in SiC/SiC/EPDM (MMD)• Impeller in cast iron and brass B10

TECHNICAL DATA• Asincronous 2 and 4 poles motor • Insulation class F• Protection degree IP55 (MD), IP54 (MMD) • 1~230V ± 10% 50Hz, 3~230/400V ±10% 50Hz

up to 4kW included, 400/690V ± 10% above • Permanent split capacitor and automatic thermal



End suction centrifugal pumps in accordance with EN 733 (ex DIN 24255) made of cast iron, appli-cations include water boosting, heating systems, air-conditioning, washing systems and many otherindustrial applications.

91


DIMENSIONAL TABLE

MD 2 POLES

Pump type Dimensions (mm)DNA P1 K1 D1 SA DNM P2 K2 D2 SM H H1 H2 [1] [2] R W N1 M N2 M1 F A B C V[1]

MD 32-125/1.1 50 102 125 165 20 32 78 100 140 18 252 112 140 122 139 80 70 140 100 190 50 13 205 431 230 PG13.5MD 32-125/1.5 50 102 125 165 20 32 78 100 140 18 252 112 140 122 139 80 70 140 100 190 50 13 205 431 230 PG13.5MD 32-160/1.5 50 102 125 165 20 32 78 100 140 18 292 132 160 122 139 80 70 190 100 240 50 13 245 431 230 PG13.5MD 32-160/2.2 50 102 125 165 20 32 78 100 140 18 292 132 160 122 139 80 70 190 100 240 50 13 245 431 230 PG13.5MD 32-200/3 50 102 125 165 20 32 78 100 140 18 340 160 180 122 – 80 70 190 100 240 50 13 290 431 252 PG13.5MD 32-200/4 50 102 125 165 20 32 78 100 140 18 340 160 180 134 – 80 70 190 100 240 50 13 290 459 254 PG 16MD 32-250/5.5 50 102 125 165 20 32 78 100 140 18 405 180 225 153 – 100 95 250 125 320 65 15 352 496 275 PG 16MD 32-250/7.5 50 102 125 165 20 32 78 100 140 18 405 180 225 153 – 100 95 250 125 320 65 15 352 540 275 PG 16MD 32-250/9.2 50 102 125 165 20 32 78 100 140 18 405 180 225 181 – 100 95 250 125 320 65 15 352 588 351 PG 21MD 32-250/11 50 102 125 165 20 32 78 100 140 18 405 180 225 181 – 100 95 250 125 320 65 15 352 588 351 PG 21MD 40-125/1.5 65 122 145 185 20 40 88 110 150 18 252 112 140 122 139 80 70 160 100 210 50 13 235 431 230 PG13.5MD 40-125/2.2 65 122 145 185 20 40 88 110 150 18 252 112 140 122 139 80 70 160 100 210 50 13 235 431 230 PG13.5MD 40-160/3 65 122 145 185 20 40 88 110 150 18 292 132 160 122 – 80 70 190 100 240 50 13 245 431 230 PG13.5MD 40-160/4 65 122 145 185 20 40 88 110 150 18 292 132 160 134 – 80 70 190 100 240 50 13 245 459 232 PG 16MD 40-200/5.5 65 122 145 185 20 40 88 110 150 18 340 160 180 153 – 100 70 212 100 265 50 13 290 495 278 PG 16MD 40-200/7.5 65 122 145 185 20 40 88 110 150 18 340 160 180 153 – 100 70 212 100 265 50 13 290 495 278 PG 16MD 40-250/11 65 122 145 185 20 40 88 110 150 18 405 180 225 181 – 100 95 250 125 320 65 15 352 588 351 PG 21MD 40-250/13 65 122 145 185 20 40 88 110 150 18 405 180 225 181 – 100 95 250 125 320 65 15 352 588 351 PG 21MD 50-125/2.2 65 122 145 185 20 50 102 125 165 20 292 132 160 122 139 100 70 190 100 240 50 13 230 431 230 PG13.5MD 50-125/3 65 122 145 185 20 50 102 125 165 20 292 132 160 122 – 100 70 190 100 240 50 13 230 451 230 PG13.5MD 50-125/4 65 122 145 185 20 50 102 125 165 20 292 132 160 134 – 100 70 190 100 240 50 13 230 479 232 PG 16MD 50-160/5.5 65 122 145 185 20 50 102 125 165 20 340 160 180 153 – 100 70 212 100 265 50 13 260 495 278 PG 16MD 50-160/7.5 65 122 145 185 20 50 102 125 165 20 340 160 180 153 – 100 70 212 100 265 50 13 260 495 278 PG 16MD 50-200/9.2 65 122 145 185 20 50 102 125 165 20 360 160 200 181 – 100 70 212 100 265 50 13 300 585 355 PG 21MD 50-200/11 65 122 145 185 20 50 102 125 165 20 360 160 200 181 – 100 70 212 100 265 50 13 300 585 355 PG 21MD 65-125/5.5 80 138 160 200 22 65 122 145 185 20 340 160 180 153 – 100 95 212 125 280 65 13 260 495 278 PG 16MD 65-125/7.5 80 138 160 200 22 65 122 145 185 20 340 160 180 153 – 100 95 212 125 280 65 13 260 495 278 PG 16MD 65-160/11 80 138 160 200 22 65 122 145 185 20 360 160 200 181 – 100 95 212 125 280 65 13 300 585 355 PG 21MD 65-160/15 80 138 160 200 22 65 122 145 185 20 360 160 200 181 – 100 95 212 125 280 65 13 300 585 355 PG 21

[1] = 3~[2] = 1~

92

DIMENSIONAL TABLE

MMD 2 POLES

Pump type Dimensions (mm) WeightFig. DNA P1 K1 D1 DNM P2 K2 D2 H H1 H2 H3 R W N1 M N2 M1 F A B C D [kg]

MMD 65-250/22 2 80 138 160 200 65 122 145 185 450 180 250 230 100 293 280 – 320 55 22 365 810 241 14 144MMD 65-250/30 2 80 138 160 200 65 122 145 185 450 200 250 257 100 325 318 – 360 60 24 400 905 305 18 172MMD 65-250/37 2 80 138 160 200 65 122 145 185 450 200 250 257 100 325 318 – 360 60 24 400 905 305 18 190MMD 80-160/10 1 100 158 180 220 80 138 160 200 405 180 225 184 125 95 250 125 320 65 14 345 665 – 14 74MMD 80-160/12.5 1 100 158 180 220 80 138 160 200 405 180 225 184 125 95 250 125 320 65 14 345 665 – 14 81.5MMD 80-160/15 1 100 158 180 220 80 138 160 200 405 180 225 184 125 95 250 125 320 65 14 345 665 – 14 88.5MMD 80-200/18.5 2 100 158 180 220 80 138 160 200 430 180 250 230 125 293 280 – 320 55 22 360 835 241 14 132MMD 80-200/22 2 100 158 180 220 80 138 160 200 430 180 250 230 125 293 280 – 320 55 22 360 835 241 14 150MMD 80-200/30 2 100 158 180 220 80 138 160 200 430 200 250 257 125 325 318 – 360 60 24 400 930 305 18 192MMD 80-200/37 2 100 158 180 220 80 138 160 200 430 200 250 257 125 325 318 – 360 60 24 400 930 305 18 210MMD 80-250/37 2 100 158 180 220 80 138 160 200 480 200 280 257 125 325 318 – 360 60 24 400 930 305 18 196MMD 100-200/22 2 125 188 210 250 100 158 180 220 480 180 280 230 125 293 318 – 320 55 22 385 835 241 14 160MMD 100-200/30 2 125 188 210 250 100 158 180 220 480 200 280 257 125 325 318 – 360 60 24 400 930 305 18 202MMD 100-200/37 2 125 188 210 250 100 158 180 220 480 200 280 257 125 325 318 – 360 60 24 400 930 305 18 220

CENTRIFUGAL PUMPS according EN 733 (ex DIN 24255) STANDARD in cast iron

DIMENSIONAL TABLE

MD 2 POLES

Pump type Dimensions (mm)DNA P1 K1 D1 SA DNM P2 K2 D2 SM H H1 H2 H3 R W N1 M N2 M1 F A B C V

MD 40-250/15 65 122 145 185 20 40 88 110 150 18 405 180 225 230 100 95 250 125 320 65 15 352 734 501 PG 21MD 50-250/15 65 122 145 185 20 50 102 125 165 20 405 180 225 230 100 95 250 125 320 65 15 352 734 501 PG 21MD 50-250/18.5 65 122 145 185 20 50 102 125 165 20 405 180 225 230 100 95 250 125 320 65 15 352 734 501 PG 21MD 50-250/22 65 122 145 185 20 50 102 125 165 20 405 180 225 230 100 95 250 125 320 65 15 352 734 501 PG 21MD 65-200/18.5 80 138 160 200 22 65 122 145 185 20 405 180 225 230 100 95 250 125 320 65 15 310 736 548 PG 21MD 65-200/22 80 138 160 200 22 65 122 145 185 20 405 180 225 230 100 95 250 125 320 65 15 310 736 548 PG 21

MD-MMD

93


DIMENSIONAL TABLE

MMD4 4 POLES

Pump type Dimensions (mm) WeightDNA n1 f1 P1 K1 D1 DNM n2 f2 P2 K2 D1 H H1 H2 H3 R W N1 M N2 M1 F A B D [kg]

MMD4 32-125/0.25R 50 4 18 102 125 165 32 4 18 78 100 140 252 112 140 107 80 70 140 100 190 50 12 205 405 14 19.5MMD4 32-125/0.25 50 4 18 102 125 165 32 4 18 78 100 140 252 112 140 107 80 70 140 100 190 50 12 205 405 14 19.5MMD4 32-160/0.37 50 4 18 102 125 165 32 4 18 78 100 140 292 132 160 107 80 70 190 100 240 50 12 240 405 14 23MMD4 32-200/0.75 50 4 18 102 125 165 32 4 18 78 100 140 340 160 180 118 80 70 190 100 240 50 12 255 425 14 30MMD4 32-200/0.92 50 4 18 102 125 165 32 4 18 78 100 140 340 160 180 118 80 70 190 100 240 50 12 255 425 14 31MMD4 32-250/1.1 50 4 18 102 125 165 32 4 18 78 100 140 405 180 225 149 100 95 250 125 320 65 12 320 485 14 47MMD4 32-250/1.5 50 4 18 102 125 165 32 4 18 78 100 140 405 180 225 149 100 95 250 125 320 65 12 320 485 14 49MMD4 40-125/0.25 65 4 18 122 145 185 40 4 18 88 110 150 252 112 140 107 80 70 160 100 210 50 12 230 405 14 20.5MMD4 40-125/0.37 65 4 18 122 145 185 40 4 18 88 110 150 252 112 140 107 80 70 160 100 210 50 12 230 405 14 21.5MMD4 40-160/0.55 65 4 18 122 145 185 40 4 18 88 110 150 292 132 160 107 80 70 190 100 240 50 12 230 405 14 25MMD4 40-200/1.1 65 4 18 122 145 185 40 4 18 88 110 150 340 160 180 149 100 70 212 100 265 50 12 285 485 14 36MMD4 40-200/1.5 65 4 18 122 145 185 40 4 18 88 110 150 340 160 180 149 100 70 212 100 265 50 12 242 485 14 36MMD4 40-250/1.5 65 4 18 122 145 185 40 4 18 88 110 150 405 180 225 149 100 95 250 125 320 65 12 325 485 14 47.5MMD4 40-250/2.2 65 4 18 122 145 185 40 4 18 88 110 150 405 180 225 159 100 95 250 125 320 65 12 352 525 14 54MMD4 50-125/0.37 65 4 18 122 145 185 50 4 18 102 125 165 292 132 160 107 100 70 190 100 240 50 12 246 425 14 25MMD4 50-125/0.55 65 4 18 122 145 185 50 4 18 102 125 165 292 132 160 107 100 70 190 100 240 50 12 246 425 14 26MMD4 50-160/0.75 65 4 18 122 145 185 50 4 18 102 125 165 340 160 180 118 100 70 212 100 265 50 12 269 445 14 32MMD4 50-160/0.92 65 4 18 122 145 185 50 4 18 102 125 165 340 160 180 118 100 70 212 100 265 50 12 269 445 14 33MMD4 50-200/1.1 65 4 18 122 145 185 50 4 18 102 125 165 360 160 180 159 100 70 212 100 265 50 12 285 485 14 38MMD4 50-200/1.5 65 4 18 122 145 185 50 4 18 102 125 165 360 160 180 149 100 70 212 100 265 50 12 285 485 14 40MMD4 50-250/2.2 65 4 18 122 145 185 50 4 18 102 125 165 405 180 225 159 100 95 250 125 320 65 14 333 525 14 57MMD4 50-250/3.0 65 4 18 122 145 185 50 4 18 102 125 165 405 180 225 159 100 95 250 125 320 65 14 333 525 14 63MMD4 65-125/0.75 80 4 18 138 160 200 65 4 18 122 145 185 340 160 180 118 100 95 212 125 280 65 12 286 445 14 32MMD4 65-160/1.1 80 4 18 138 160 200 65 4 18 122 145 185 360 160 200 149 100 95 212 125 280 65 12 288 485 14 37.5MMD4 65-160/1.5 80 4 18 138 160 200 65 4 18 122 145 185 360 160 200 149 100 95 212 125 280 65 12 288 485 14 40MMD4 65-200/2.2 80 4 18 138 160 200 65 4 18 122 145 185 405 180 225 159 100 95 250 125 320 65 14 328 525 14 51MMD4 65-200/3.0 80 4 18 138 160 200 65 4 18 122 145 185 405 180 225 159 100 95 250 125 320 65 14 328 525 14 57MMD4 65-250/4.0 80 4 18 138 160 200 65 4 18 122 145 185 450 200 250 159 100 120 280 160 360 80 14 365 535 14 80MMD4 65-250/5.5 80 4 18 138 160 200 65 4 18 122 145 185 450 200 250 184 100 120 280 160 360 80 14 365 640 14 90

MD-MMD

94


DIMENSIONAL TABLE

MMD4 4 POLES

Pump type Dimensions (mm) WeightDNA n1 f1 P1 K1 D1 DNM n2 f2 P2 K2 D2 H H1 H2 H3 R W N1 M N2 M1 F A B D [kg]

MMD4 80-160/1.5 100 8 18 158 180 220 80 4 18 138 160 200 405 180 225 149 125 95 250 125 320 65 14 330 510 14 45MMD4 80-160/2.2 100 8 18 158 180 220 80 4 18 138 160 200 405 180 225 159 125 95 250 125 320 65 14 330 550 14 51MMD4 80-200/3.0 100 8 18 158 180 220 80 4 18 138 160 200 430 180 250 159 125 95 280 125 345 65 12 355 550 14 66MMD4 80-250/4.0 100 8 18 158 180 220 80 4 18 138 160 200 430 180 250 159 125 95 280 125 345 65 12 355 560 14 73MMD4 80-250/5.5 100 8 18 158 180 220 80 4 18 138 160 200 480 200 280 184 125 120 315 160 400 80 14 400 665 18 96MMD4 80-250/7.5 100 8 18 158 180 220 80 4 18 138 160 200 480 200 280 184 125 120 315 160 400 80 14 400 665 18 106MMD4 100-200/4.0 125 8 18 188 210 250 100 8 18 158 180 220 480 200 280 159 125 120 280 160 360 80 14 385 560 18 78MMD4 100-200/5.5 125 8 18 188 210 250 100 8 18 158 180 220 480 200 280 184 125 120 280 160 360 80 14 385 665 18 90MMD4 100-250/7.5 125 8 18 188 210 250 100 8 18 158 180 220 505 225 280 184 140 120 315 160 400 80 14 420 675 18 112MMD4 100-250/9.2 125 8 18 188 210 250 100 8 18 158 180 220 505 225 280 184 140 120 315 160 400 80 14 420 675 18 118MMD4 125-200/5.5 150 8 22 212 240 285 125 8 18 188 210 250 565 250 315 255 140 120 315 160 400 80 14 470 700 18 124MMD4 125-200/7.5R 150 8 22 212 240 285 125 8 18 188 210 250 565 250 315 255 140 120 315 160 400 80 14 470 700 18 134MMD4 125-200/7.5 150 8 22 212 240 285 125 8 18 188 210 250 565 250 315 255 140 120 315 160 400 80 14 470 700 18 134MMD4 125-200/9.2 150 8 22 212 240 285 125 8 18 188 210 250 565 250 315 255 140 120 315 160 400 80 14 470 770 18 140MMD4 125-250/11 150 8 22 212 240 285 125 8 18 188 210 250 605 250 355 255 140 120 315 160 400 80 16 470 700 18 162MMD4 125-250/15 150 8 22 212 240 285 125 8 18 188 210 250 605 250 355 255 140 120 315 160 400 80 16 470 855 18 190MMD4 150-200/7.5 200 8 22 268 295 340 150 8 22 212 240 285 680 280 400 295 160 155 450 200 550 100 22 550 855 24 167MMD4 150-200/9.2 200 8 22 268 295 340 150 8 22 212 240 285 680 280 400 295 160 155 450 200 550 100 22 550 855 24 173MMD4 150-200/11 200 8 22 268 295 340 150 8 22 212 240 285 680 280 400 295 160 155 450 200 550 100 22 550 855 24 175MMD4 150-200/15 200 8 22 268 295 340 150 8 22 212 240 285 680 280 400 295 160 155 450 200 550 100 22 550 875 24 203MMD4 200-250/18.5R 250 12 22 320 295 395 200 8 22 268 295 340 765 315 450 295 200 155 450 200 550 100 22 630 1000 24 278MMD4 200-250/18.5 250 12 22 320 295 395 200 8 22 268 295 340 765 315 450 295 200 155 450 200 550 100 22 630 1000 24 278MMD4 200-250/22R 250 12 22 320 295 395 200 8 22 268 295 340 765 315 450 295 200 155 450 200 550 100 22 630 1000 24 300MMD4 200-250/22 250 12 22 320 295 395 200 8 22 268 295 340 765 315 450 295 200 155 450 200 550 100 22 630 1000 24 300

MD-MMD

95


PERFORMANCE CHART MD/MMD series 2 POLES

R.P.M. ≈ 2900 min-1

Test fluid: Clean water 20°CApplicable standard: UNI EN ISO 9906 Annex A

MD-MMDTO

TAL

HEAD

96

*Suction head has not to exceed 2 m**Positive 1 m suction head

PERFORMANCE TABLE/PERFORMANCE TABLE


Motor Q=Capacityl/min 0 100 200 250 280 320 400 550 600 667 800 1000 1100 1150 1200 1400 1900 2000 2200 2300 2400

Pump type m3/h 0 6 12 15 17 19 24 33 36 40 48 60 66 69 72 84 114 120 132 138 144kW HP H=Total Head

MD 32-125/1.1 * 1.1 1.5 23 22.5 20.5 18.5 - - - - - - - - - - - - - - - - -MD 32-125/1.5 * 1.5 2 24 23.5 21.5 19.7 18.5 16.6 12 - - - - - - - - - - - - - -MD 32-160/1.5 * 1.5 2 28 27 24 22 20.5 - - - - - - - - - - - - - - - -MD 32-160/2.2 * 2.2 3 35.5 34.5 32 30 28.5 - - - - - - - - - - - - - - - -MD 32-200/3.0 3 4 43 41 36.5 33 30.5 - - - - - - - - - - - - - - - -MD 32-200/4.0 4 5.5 52 50.5 47 44.5 42.5 - - - - - - - - - - - - - - - -MD 32-250/5.5 5.5 7.5 58 57 54 51 49 45 - - - - - - - - - - - - - - -MD 32-250/7.5 7.5 10 71 70 67 64 62 58 - - - - - - - - - - - - - - -MD 32-250/9.2 9.2 12.5 84 83 80 78 76 73 - - - - - - - - - - - - - - -MD 32-250/11 11 15 95 94 91 89 87 84 - - - - - - - - - - - - - - -MD 40-125/1.5 * 1.5 2 20 19.5 18.4 17.7 17.2 16.5 14.6 10.3 8.5 - - - - - - - - - - - -MD 40-125/2.2 * 2.2 3 25.5 25 23.5 23 22.5 22 20.5 16.9 15.5 - - - - - - - - - - - -MD 40-160/3.0 3 4 31.5 30.5 29 28 27.5 26.5 25 21 19 - - - - - - - - - - - -MD 40-160/4.0 4 5.5 39 38 36.5 36 33.5 35 33 29.5 28 - - - - - - - - - - - -MD 40-200/5.5 5.5 7.5 48.5 48 47 46 45.5 44.5 42.5 37.5 - - - - - - - - - - - - -MD 40-200/7.5 7.5 10 58 57.5 56.5 55.5 55 54.5 52.5 47.5 45 - - - - - - - - - - - -MD 40-250/11 11 15 74.5 - 73 72 71.5 70 66.5 58.5 55 - - - - - - - - - - - -MD 40-250/13 13 17.5 85.5 - 84 83.5 82.5 81.5 78 69 65 - - - - - - - - - - - -MD 40-250/15 15 20 94.5 - 93 92 91.5 90.5 88 78 74 - - - - - - - - - - - -MD 50-125/2.2 * 2.2 3 17.5 - - - - - 16 14.8 14.3 13.5 11.7 8.5 - - - - - - - - -MD 50-125/3.0 3 4 21 - - - - - 19.5 18.6 18.2 17.6 16.1 13 - - - - - - - - -MD 50-125/4.0 4 5.5 25.5 - - - - - 24 23 23 22 21 17.8 16 - - - - - - - -MD 50-160/5.5 5.5 7.5 33.5 - - - - - 32.5 31 30.5 30 28 24.5 22.5 - - - - - - - -MD 50-160/7.5 7.5 10 39 - - - - - 38 37 36.5 35.5 34 31 29 28 27 - - - - - -MD 50-200/9.2 9.2 12.5 50 - - - - - 48 46 45 44 41 36 33 - - - - - - - -MD 50-200/11 11 15 56 - - - - - 54.5 53 52 51 48.5 43.5 40.5 39 37 - - - - - -MD 50-250/15 15 20 71 - - - - - 69 67 66 64 60.5 52.5 47 - - - - - - - -MD 50-250/18.5 18.5 25 82 - - - - - 80 78.5 77.5 76 72.5 65 60 57 - - - - - - -MD 50-250/22 22 30 93 - - - - - 91 89.5 88.5 87 84 77 72.5 70 - - - - - - -MD 65-125/5.5 5.5 7.5 24 - - - - - - - 23.2 23 22.5 21.5 20.5 20.5 20 18.2 12.5 - - - -MD 65-125/7.5 7.5 10 27.5 - - - - - - - 26.5 26 25.5 24.5 24 23.5 23 21.5 16.3 15 - - -MD 65-160/11 11 15 34.5 - - - - - - - - 34 33.5 33 32.5 32 32 30.5 26.5 25.5 23 22 -MD 65-160/15 15 20 39 - - - - - - - - - 38 37.5 37 36.5 35 31 30.5 28.5 28.5 27 26MD 65-200/18.5 18.5 25 55 - - - - - - - - - 53.5 52.5 51.5 51 50.5 48.5 42 40.5 37 - -MD 65-200/22 22 30 61 - - - - - - - - - 59.5 58.5 58 57.5 57 55.5 50 49 46 - -

Pump typeMotor Q=Capacity

l/min 0 800 1000 1250 1500 1750 2000 2250 2500 2750 3000 3500 4000 4500m3/h 0 48 60 75 90 105 120 135 150 165 180 210 240 270

kW HP H=Total HeadMMD 65-250/22 22 30 65 64 63 61 57 53 - - - - - - - - -MMD 65-250/30 30 40 78 77 76 74 70 66 60 53* - - - - - - -MMD 65-250/37 37 55 86.5 86 85 83 79 75 70 64* - - - - - - -MMD 80-160/10 10 13.6 24.6 - 24 23 22 21 19.5 18 16.5 15* - - - - -MMD 80-160/12.5 12.5 17 29.5 - 28.5 28 27 26 24.5 23 21.5 20 18.5* - - - -MMD 80-160/15 15 20 35 - 34 33.3 32.5 31.8 31 29 27.5 26 24.3 - - - -MMD 80-200/18.5 18.5 25 42.2 - 42 41 40 38.5 37 35 33 30.5 28 - - - -MMD 80-200/22 22 30 47.2 - 47 46.5 45.5 44.5 43 41 39 37 34 - - - -MMD 80-200/30 30 40 55.5 - 55 54 53 52 51 49 47 45 43 37 - - -MMD 80-200/37 37 55 57.5 - 57 56.8 56.5 56 55 54 52.5 51 48 42 - - -MMD 80-250/37 37 55 68.5 - - 67.5 67 66.2 65 63.3 61 58.3 55 47 - - -MMD 100-200/22 22 30 40 - - - 38.5 38 37 36 34.5 33 31.5 28 24 - -MMD 100-200/30 30 40 48 - - - 47 46.3 45.6 44.8 43.7 42.4 41 38 34.6* 30** -MMD 100-200/37 37 55 54.2 - - - 53.7 53.3 53 52 51 50 49 46 43* 38** -

*Available also for single-phase version

DIMENSIONAL TABLE


MD-MMD

97

PERFORMANCE CHART MMD4 series 4 POLES


R.P.M. ≈ 1450 min-1

test fluid: Clean water 20°CApplicable standard: UNI EN ISO 9906 Annex A

98

DIMENSIONAL TABLE


Pump typeMotor Q=Capacity

l/min 0 50 75 100 125 150 175 200 225 250 275 300 350 400 450 500 550 600 650 700 800 900 1000 1100 1200 1300 1400 1500 1750 2000 2250m3/h 0 3 4.5 6 7.5 9 10.5 12 13.5 15 16.5 18 21 24 27 30 33 36 39 42 48 54 60 66 72 78 84 90 105 120 135

kW HP H=Total headMMD4 32-125/0,25 R 0.25 0.33 4.8 4.4 4 3.5 3 2.2 - - - - - - - - - - - - - - - - - - - - - - - - -MMD4 32-125/0,25 0.25 0.33 6.3 6.2 6.1 5.8 5.3 4.6 3.8 3 - - - - - - - - - - - - - - - - - - - - - - -MMD4 32-160/0,37 0.37 0.5 9.6 - 9.2 8.9 8.3 7.7 6.8 5.8 4.7 - - - - - - - - - - - - - - - - - - - - - -MMD4 32-200/0,75 0.75 1.0 13.5 - 12.8 12.4 11.9 11.3 10.6 9.8 8.9 8 7 6 - - - - - - - - - - - - - - - - - - -MMD4 32-200/0,92 0.92 1.25 15 - 14.6 14.3 13.8 13.3 12.7 11.8 10.9 10 9 8 - - - - - - - - - - - - - - - - - - -MMD4 32-250/1,1 1.1 1.5 19 - 18.5 18 17.5 17 15.9 14.5 12.8 11 - - - - - - - - - - - - - - - - - - - - -MMD4 32-125/1,5 1.5 2 22.5 - 22 21.6 21.2 20.5 19.4 18 16.5 15 13* - - - - - - - - - - - - - - - - - - - -MMD4 40-125/0,25 0.25 0.33 4.8 - - 4.6 4.5 4.3 4.1 3.9 3.6 3.3 2.9 2.4 - - - - - - - - - - - - - - - - - - -MMD4 40-125/0,37 0.37 0.5 6.4 - - 6.3 6.2 6.1 6 5.8 5.5 5.2 4.9 4.4 3* - - - - - - - - - - - - - - - - - -MMD4 40-160/0,55 0.55 0.75 9.2 - - 8.8 8.6 8.4 8.1 7.7 7.3 6.9 6.4 5.9 4.4 - - - - - - - - - - - - - - - - - -MMD4 40-200/1,1 R 1.1 1.5 12.9 - - 12.7 12.5 12.1 11.7 11.2 10.7 10.1 9.5 8.5 6.8 - - - - - - - - - - - - - - - - - -MMD4 40-200/1,1 1.1 1.5 14.5 - - 14.2 14 13.8 13.4 13 12.5 11.8 11 10.2 8.3 6 - - - - - - - - - - - - - - - - -MMD4 40-250/1,5 1,5 2 18.7 - - 18.3 18 17.7 17.4 17 16.7 16.2 15.6 15 13.7 12 - - - - - - - - - - - - - - - - -MMD4 40-250/2,2 2.2 3 23.2 - - 22.5 22.3 22 21.7 21.4 21.2 20.5 20.2 19.5 18.5 17 - - - - - - - - - - - - - - - - -MMD4 50-125/0,37 0.37 0.5 5.4 - - - - 5.3 5.3 5.2 5.1 5 4.9 4.8 4.5 4.1 3.6 3 - - - - - - - - - - - - - - -MMD4 50-125/0.55 0.55 0.75 6.5 - - - - 6.4 6.3 6.3 6.2 6.1 6 5.9 5.5 5.2 4.9 4.4 - - - - - - - - - - - - - - -MMD4 50-160/0,75 0.75 1.0 8.3 - - - - - - 8.1 8 7.9 7.8 7.7 7.4 7 6.6 6 5.1 4 - - - - - - - - - - - - -MMD4 50-160/0,92 0.92 1.25 9.1 - - - - - - 9 8.9 8.9 8.8 8.7 8.4 8.1 7.7 7.2 6.4 5.5 - - - - - - - - - - - - -MMD4 50-200/1,1 1.1 1.5 12.6 - - - - - - 12.3 12.2 12 11.8 1.5 10.8 10 9 8 7 5.8 - - - - - - - - - - - - -MMD4 50-200/1,5 1.5 2 14.3 - - - - - - 14.1 14 13.9 13.7 13.5 12.8 12 11.3 10.2 9 7.8 6.4 - - - - - - - - - - - -MMD4 50-250/2,2 2.2. 3 19.5 - - - - - - 18.5 18.3 18.1 17.8 17.5 17 16.2 15.5 14.5 13.5 12.5 11.3 10 - - - - - - - - - - -MMD4 50-250/3 3 4 23 - - - - - - 22.5 22.4 22.3 22.2 22 21.5 20.9 20.2 19.4 18.5 17.5 16.3 14.7 - - - - - - - - - - -MMD4 65-125/0,75 0.75 1.0 6 - - - - - - - - - - 5.8 5.7 5.6 5.5 5.3 5.1 4.9 4.6 4.4 3.9 - - - - - - - - - -MMD4 65-160/1,1 1.1 1.5 8.6 - - - - - - - - - - 8.5 8.5 8.4 8.3 8.2 8.1 8 7.8 7.4 6.8 5.8 5 - - - - - - - -MMD4 65-160/1,5 1.5 2 10.3 - - - - - - - - - - 10.2 10.1 10 9.9 9.8 9.6 9.4 9.2 9 8.4 7.5 6.5 - - - - - - - -MMD4 65-200/2,2 2.2 3 12.6 - - - - - - - - - - - - 12.5 12.4 12.3 12.2 12.1 12 11.7 11.1 10.5 9.6 8.5 - - - - - - -MMD4 65-200/3 3 4 15,4 - - - - - - - - - - - - 15.3 15.3 15.2 15.1 15 14.8 14.6 14.3 13.6 12.8 12 11 - - - - - -MMD4 65-250/4 4 5.5 20 - - - - - - - - - - - - - - 19.5 19.3 19.1 18.8 18.5 17.5 16.5 15.5 14 12.5 10.4 - - - - -MMD4 65-250/5.5 5.5 7.5 23.3 - - - - - - - - - - - - - - 23 22.8 22.6 22.4 22.2 21.4 20.6 19.7 18.7 17.3 15.7 14 - - - -MMD4 80-160/1,5 1.5 2 8 - - - - - - - - - - - - - - - - 7.7 7.6 7.5 7.3 7 6.7 6.4 6.1 5.7 5.4 5 - - -MMD4 80-160/2,2 2.2 3 10 - - - - - - - - - - - - - - - - 9.7 9.6 9.5 9.3 9 8.8 8.5 8.2 7.9 7.5 7.1 6 - -MMD4 80-200/3 3 4 12.8 - - - - - - - - - - - - - - - - 12 11.9 11.7 11.5 11.3 11 10.5 10 9.5 9 8.5 7 - -MMD4 80-200/4 4 5.5 14.9 - - - - - - - - - - - - - - - - 14.4 14.3 14.2 14 13.8 13.5 13.1 12.6 12.2 11.6 11 9 6.5 -MMD4 80-250/5,5 5.5. 7.5 20 - - - - - - - - - - - - - - - - - - - 19.2 18.9 18.5 18 17.6 17.1 16.5 16 14 12 -MMD4 80-250/7,5 7.5 10 23.5 - - - - - - - - - - - - - - - - - - - 22.3 22.1 21.9 21.7 21.3 21 20.5 20 18.5 16.9 14.5

*Suction head has not to exceed 2 m**Positive 1 m suction head

Pump typeMotore Q=Capacity

l/min 0 900 1000 1100 1200 1300 1400 1500 1750 2000 2250 2500 2750 3000 3500 3700 4000 4500 5000 5500 6500 7000 8000 8500 9000 9500 10000m3/h 0 54 60 66 72 78 84 90 105 120 135 150 165 180 210 222 240 270 300 330 390 420 480 510 540 570 600

kW HP H=Total headMMD4 100-200/4 4 5.5 13 12.3 12.2 12 11.8 11.6 11.4 11.2 10.3 9.3 8 6.6 4.8* - - - - - - - - - - - - -- -MMD4 100-200/5,5 5.5 7.5 14.7 14.5 14.4 14.2 14 13.8 13.6 13.4 12.8 12 11 9.8 8.5 - - - - - - - - - - - - - -MMD4 100-250/7,5 7.5 10 20 - 19.5 19.3 19.1 18.9 18.7 18.5 17.5 16.5 15.2 14 12 - - - - - - - - - - - - - -MMD4 100-250/9.2 9.2 12.5 22.4 - 22 21.9 21.8 21.7 21.6 21.5 20.5 19.5 18.5 17 15 12.8* - - - - - - - - - - - - -MMD4 125-200/5,5 5.5 5.5 11.2 - - - - - - 10.5 10.3 9.9 9.5 9.1 8.5 7.9 6.4 5.7 - - - - - - - - - - -MMD4 125-200/7.5 R 7.5 10 12.4 - - - - - - 11.8 11.6 11.3 11 10.6 10.2 9.6 8.3 7.7 6.7 - - - - - - - - - -MMD4 125-200/7.5 7.5 10 13.7 - - - - - - - 12.9 12.7 12.4 12.1 11.7 11.2 10.1 9.6 8.7 7.1* - - - - - - - - -MMD4 125-200/9.2 9.2 12.5 15 - - - - - - - 14.3 14.1 13.8 13.6 13.2 12.8 11.8 11.3 10.6 9.2 7.6** - - - - - - - -MMD4 125-250/11 11 15 18.6 - - - - - - - 17.2 16.7 16.2 15.5 14.8 13.9 12 11.3 10 - - - - - - - - - -MMD4 125-250/15 15 20 22 - - - - - - - 21 20.5 20.1 19.5 18.9 18.2 16.6 16 14.8 12.8 - - - - - - - - -MMD4 150-200/7.5 7.5 10 11.6 - - - - - - - - 11 10.7 10.4 10.1 9.7 8.8 8.4 7.8 6.6 5.3 - - - - - - - -MMD4 150-200/9.2 9.2 12.5 12.5 - - - - - - - - 12 11.8 11.6 11.2 10.9 10.2 9.8 9.2 8 6.8 5.6 - - - - - - -MMD4 150-200/11 11 15 14.5 - - - - - - - - - - 13.7 13.5 13.2 12.5 12.2 11.7 10.8 9.8 8.7 6.1 - - - - - -MMD4 150-200/15 15 20 15.8 - - - - - - - - - - 15.2 14.9 14.7 14.2 13.8 13.4 12.5 11.6 10.5 8.2 6.8 - - - - -MMD4 200-250/18.5 R 18.5 25 16 - - - - - - - - - - - - 14.9 14.5 14.3 14.1 13.6 13 12.3 11 10.3 8.6 7.8 - - -MMD4 200-250/18.5 18.5 25 16.9 - - - - - - - - - - - - 15.9 15.5 15.3 15.2 14.7 14.2 13.6 12.3 11.6 10 9.1 8.2 - -MMD4 200-250/22 R 22 30 19.3 - - - - - - - - - - - - - 18 17.8 17.6 17.1 16.6 16 14.7 13.9 12.2 11.2 10.1 9 -MMD4 200-250/22 22 30 20.4 - - - - - - - - - - - - - 19.1 18.9 18.8 18.3 17.8 17.3 16 15.3 13.7 12.7 11.7 10.7 9.6


99

WINNER4” BOREHOLE CENTRIFUGAL PUMPS

SPECIFICATIONS• Maximum immersion: 100 m • Maximum liquid temperature: 30°C with water fillled motor

40°C with oil filled motor• Maximum sand content: 50 ppm

MATERIAL• External casing, suction and discharge ports, filter

and diffuser casing in AISI 304 • Impeller and diffuser in tecnopolymer• Shaft in AISI 304• Mechanical seal in carbon/ceramic/NBR

TECHNICAL DATA• 2 poles motor, water filled (WY version)

or oil fillled (OY version) • Maximum startings/hour: 30 • Insulation class F• Protection degree IP58 • 1~220V ± 6% 50Hz, 3~380V ± 6% 50Hz • DNM1”1/4 for A-B-C models, 2” for D-E models

4" borehole multistage centrifugal pumps with a closed impeller constructed from noryl, outer casingand flanges are stainless steel AISI 304. Applications include clean water extraction from boreholes,pressure boosting for domestic, farming and industrial applications. Installation can be horizontal aswell as vertical. The Winner can be fitted to any NEMA standard motor.

100

WINNER

Pump type kW Absorbed Current (A)CapacitorµF Vc

380V1~

220V3~

PERFORMANCE TABLE


WYM 050 A1/14WYM 075 A1/21 WYM 100 A1/28WYM 050 B2/7 WYM 075 B2/10WYM 100 B2/14 WYM 150 B2/21WYM 200 B2/28 WYM 300 B2/40WYM 050 C4/4 WYM 075 C4/6WYM 100 C4/9 WYM 150 C4/13WYM 200 C4/18 WYM 300 C4/27WYM 100 C5/7 WYM 150 C5/10WYM 200 C5/14 WYM 300 C5/21

--

WYM 075 D9/4 WYM 100 D9/5WYM 150 D9/7 WYM 200 D9/9WYM 300 D9/14

--

WYM 150 E15/4WYM 200 E15/6 WYM 300 E15/9

---

Three-phase380V 50Hz

WYT 050 A1/14WYT 075 A1/21 WYT 100 A1/28WYT 050 B2/7 WYT 075 B2/10WYT 100 B2/14 WYT 150 B2/21WYT 200 B2/28 WYT 300 B2/40WYT 050 C4/4 WYT 075 C4/6WYT 100 C4/9 WYT 150 C4/13WYT 200 C4/18 WYT 300 C4/27WYT 100 C5/7 WYT 150 C5/10WYT 200 C5/14 WYT 300 C5/21WYT 400 C5/28 WYT 550 C5/38WYT 075 D9/4 WYT 100 D9/5WYT 150 D9/7 WYT 200 D9/9WYT 300 D9/14 WYT 400 D9/19WYT 550 D9/26 WYT 150 E15/4WYT 200 E15/6 WYT 300 E15/9WYT 400 E15/12WYT 550 E15/16WYT 750 E15/22

0,370,550,750,370,550,751,11,52,20,370,550,751,11,52,20,751,11,52,23,04,00,550,751,11,52,23,04,01,11,52,23,04,05,5

16203016203040608016203040608030406080--

2030406080--

406080---

450450450450450450450450450450450450450450450450450450450

--

450450450450450

--

450450450

---

3,35,16

3,35,16

8,711,216,73,35,16

8,711,216,7

68,711,216,7

--

5,16

8,711,216,7

--

8,711,216,7

---

1,52,22,81,52,22,83,74,86,91,52,22,83,74,86,92,83,74,86,99,610,92,22,83,74,86,99,610,93,74,86,99,610,913,5

Pump type kW Absorbed Current (A)CapacitorµF Vc

380V1~

220V3~Single-phase

220V 50Hz

OYM 050 A1/14OYM 075 A1/21 OYM 100 A1/28OYM 050 B2/7 OYM 075 B2/10OYM 100 B2/14 OYM 150 B2/21OYM 200 B2/28 OYM 300 B2/40OYM 050 C4/4 OYM 075 C4/6OYM 100 C4/9 OYM 150 C4/13OYM 200 C4/18 OYM 300 C4/27OYM 100 C5/7 OYM 150 C5/10OYM 200 C5/14 OYM 300 C5/21

--

OYM 075 D9/4 OYM 100 D9/5OYM 150 D9/7 OYM 200 D9/9OYM 300 D9/14

--

OYM 150 E15/4OYM 200 E15/6 OYM 300 E15/9

---


OYT 050 A1/14OYT 075 A1/21 OYT 100 A1/28OYT 050 B2/7 OYT 075 B2/10OYT 100 B2/14 OYT 150 B2/21OYT 200 B2/28 OYT 300 B2/40OYT 050 C4/4 OYT 075 C4/6OYT 100 C4/9 OYT 150 C4/13OYT 200 C4/18 OYT 300 C4/27OYT 100 C5/7 OYT 150 C5/10OYT 200 C5/14 OYT 300 C5/21OYT 400 C5/28 OYT 550 C5/38OYT 075 D9/4 OYT 100 D9/5OYT 150 D9/7 OYT 200 D9/9OYT 300 D9/14 OYT 400 D9/19OYT 550 D9/26 OYT 150 E15/4OYT 200 E15/6 OYT 300 E15/9OYT 400 E15/12OYT 550 E15/16OYT 750 E15/22

0,370,550,750,370,550,751,11,52,20,370,550,751,11,52,20,751,11,52,23,04,00,550,751,11,52,23,04,01,11,52,23,04,05,5

20253520253540608020253540608035406080--

2535406080--

406080---

450450450450450450450450450450450450450450450450450450450

--

450450450450450

--

450450450

---

3,24,45,63,24,45,67,710,815,13,24,45,67,710,815,15,67,710,815,1

--

4,45,67,710,815,1

--

7,710,815,1

---

1,41,82,51,41,82,53,34,46,11,41,82,53,34,46,12,53,34,46,18,8111,82,53,34,46,18,8113,34,46,18,811

14,4

4” BOREHOLE CENTRIFUGAL PUMPS

The pumps are manufactured to be coupled to NEMA standard motors. Improvements in design ofimpellers and diffusers lead to far better wear resistence, excluding the E15 series, offering the fol-lowing advantages:• axial thrust load on the motor shaft is drastically reduced leading to increased average life of the

motor.• Impeller outer diameter is wider than the usual one; so that similar performance are given by a

reduced number of stage.• a small quality of solids in the water is acceptable.The built-in non-return valve in easy to remove and to inspect.The components are over sized to facilitate the use of the pumps in even the most heavy conditions.

TECHNICAL DATA

101


DIMENSIONAL TABLEPump type

WINNERDimensions (mm)

A1/14A1/21 A1/28B2/7 B2/10B2/14 B2/21B2/28 B2/40C4/4 C4/6C4/9 C4/13C4/18 C4/27C5/7 C5/10C5/14 C5/21C5/28 C5/38D9/4 D9/5D9/7 D9/9D9/14 D9/19D9/26 E15/4E15/6 E15/9E15/12E15/16E15/22

588,5736941401473

568,5736941

1228337,5389,5467

570,5700971

513,56337931110

1389,51788,5417,5463,5555647

876,51144

1465,5539730

997,5126515712068

9101082,51322,5722,5819,5950

1152,51407,51804,5

659736

848,5987

1166,51547,5

8951049,51259,51686,5

--

764845

971,51113,51453

--

955,51196,51574

---

8601032,51272,5672,5769,5900

1102,51357,51704,5

609686

798,5937

1116,51447,5

845999,5

1209,51586,5

--

714795

921,51063,51353

--

905,51146,51474

---

8451007,51237,5657,5744,5865

1067,51307,51644,5

594661

763,5902

1066,51387,5

810964,51159,51526,518912360689760

886,51013,51293

1645,52037870,5

1069,51414

1766,52142,52749,5

9101057,51287,5722,5794,5915

1117,51357,51694,5

659711

813,5952

1116,51437,5

8601014,51209,51576,519662435739810

936,51063,51343

1720,52112920,51146,51464

1841,52217,52842,5

G1 1/4

G1 1/4

G1 1/4

G1 1/4

G1 1/4

G1 1/4

G1 1/4

G1 1/4

G1 1/4

G1 1/4

G1 1/4

G1 1/4

G1 1/4

G1 1/4

G1 1/4

G1 1/4

G1 1/4

G1 1/4

G1 1/4

G1 1/4

G1 1/4

G2G2G2G2G2G2G2G2G2G2G2G2G2

12,915,820,311,213,216,119,624,630,210,312,114,817,521,226,214,317

20,524,2

--

12,214,317

20,524,7

--

1721,327,2

---

12,314,718,710,612,114,518

22,428,29,711

13,215,919

24,212,715,418,322,229,936,911,112,715,418,322,730

36,415,419,125,234

38,948

13,916,721,212,214,117

20,225,231,511,313

15,718,121,827,515,217,621,125,5

--

13,115,217,621,126--

17,621,928,5

---

13,315,719,611,613,115,418,823

28,810,712

14,116,719,624,813,616,218,922,830,937,512,113,616,218,923,33137

16,219,725,835

39,548,6

H OYM OYT WYM WYT DNM OYM OYT WYM WYTH1 Weight kg

102

WINNER


4” BOREHOLE CENTRIFUGAL PUMPS

A1 B2

C4 C5

103



kW

0,370,550,750,370,550,751,11,52,2

0,370,550,751,11,52,2

0,751,11,52,23,04,0

0,550,751,11,52,23,04,01,11,52,23,04,05,5

Pump typeWinnerWY - OY

Q=Capacity

050 A1/14075 A1/21 100 A1/28050 B2/7 075 B2/10100 B2/14150 B2/21200 B2/28 300 B2/40050 C4/4 075 C4/6100 C4/9 150 C4/13200 C4/18 300 C4/27100 C5/7 150 C5/10200 C5/14 300 C5/21400 C5/28 550 C5/38075 D9/4 100 D9/5150 D9/7200 D9/9300 D9/14 400 D9/19550 D9/26 150 E15/4200 E15/6 300 E15/9400 E15/12 550 E15/16750 E15/22

6293

127436287

130174250

58,487,4

120,540,758,982,9

124,3166,7240,8

53,680,3112,137,955

77,7116,9157,6229,3

27405986118177

47,771,6101,6

40,560,988,530,844,963,997,2132,6197,725,838,557

82,8112,7170,9

405780

120159215

324872

---

21,531,742,569,396,3149,224,136,353,978,6106,4162,538,556,178,1116,5155

209,72530425584114154

---

101521314260-------------------

2233506789122

---------

19,429,944,565,887,513135,851,671,8107,4143,6194,623,728,940,952,180,5108,8147,6

---------

12,720,530,246

59,488,831,846,262,994,5127

173,122,127,238,249,176

102,4139,4

---------4810162030

26,837,851,376,8104,3143,920,125,135

45,170,194,4129,119,730,246,162,783,4114,3

---------------

152028445779

16,320,728,736,957,577,8107,1

---------------------

17,226,941,156,875,9104,3

---------------------

11,614,920,726,440,956

76,9

---------------------671114222938

----------------------------

14,322,935,149,266,391,9

----------------------------

11,218,228

39,95476

----------------------------

7,713

19,728,338,555,4

----------------------------4710141826

l/minm3/h

100,6

150,9

201,2

251,5

301,8

352,1

402,4

503

603,6

804,8

1006

1307,8

1509

1609,6

19011,4

20012

25015

30018

35021

H=Total head

PERFORMANCE TABLE

D9 E15

105

4BHS4” BOREHOLE CENTRIFUGAL PUMPS in AISI 304

SPECIFICATIONS• Maximum immersion: 100 m • Maximum liquid temperature: 30°C • Maximum sand content: 50 ppm

MATERIALS• Bracket, suction and discharge ports, coupling, impeller,

diffuser, diffuser cover, valve, tie-rod and cable guard in AISI 304

• Liner ring in tecnopolymer/AISI 304• Shaft in AISI 316

TECHNICAL DATAPumps can be requested to be coupled with the followingmotor versions:

• Pump O4BHS with motor OY in coolant liquid bath (maxliquid temperature 40°C)

• Pump W4BHS with motor WY in water bath (max liquidtemperature 30°C)

Both types of motor have the following features:• 2 poles motor, water filled (WY version)

or oil fillled (OY version) • Maximum startings/hour: 30 • Insulation class F• Protection degree IP58 • 1~220V ± 6% 50Hz, 3~380V ± 6% 50Hz

4" borehole multistage pump entirely made of stainless steel AISI 304. The smooth surface of theimpellers and diffusers offer an improved efficiency, and reliability factor. Applications include cleanwater extraction from boreholes, pressure boosting for domestic, farming and industrial applications.Installation can be horizontal as well as vertical. The 4BHS can be fitted to any NEMA standard motor.

106


kW

0,550,751,11,52,22,20,550,751,11,52,22,23,04,00,751,11,52,22,23,04,01,52,23,04,05,5

Pump type4BHS

Q=Capacity

4BHS2 13/54BHS2 18/7 4BHS2 27/114BHS2 36/154BHS2 44/224BHS2 51/224BHS4 7/54BHS4 10/74BHS4 15/114BHS4 20/154BHS4 24/224BHS4 29/224BHS4 36/304BHS4 48/404BHS7 5/74BHS7 7/114BHS7 10/154BHS7 12/224BHS7 14/224BHS7 18/304BHS7 23/404BHS15 7/154BHS15 10/224BHS15 13/30 4BHS15 17/404BHS15 25/55

6590143186227275

--------------------

5271114145

178,7222,8

375379105126154189253

------------

41589211614118136

52,576102122150178

241,1------------

29,54164809712534487296115

141,5170227

------------

------

31,545

66,589106132

156,521028

38,5546577100125

-----

------

18,5263950617685

109,425

35,549,5597090114

-----

--------------

2332,5455464

82,510430

43,55572108

--------------

13,52027334151642738

47,56395

---------------------

18,528,536,145

68,2

---------------------

1217,5252944

l/minm3/h

130,8

301,8

402,4

503,0

603,6

1006

1207,2

18010,8

25015

30018

H=Total head

Pump type kW Absorbed Current (A)

Three-phase380V


4BHS2 13/54BHS2 18/7 4BHS2 27/114BHS2 36/154BHS2 44/224BHS2 51/224BHS4 7/54BHS4 10/74BHS4 15/114BHS4 20/154BHS4 24/224BHS4 29/224BHS4 36/304BHS4 48/404BHS7 5/74BHS7 7/114BHS7 10/154BHS7 12/224BHS7 14/224BHS7 18/304BHS7 23/404BHS15 7/154BHS15 10/224BHS15 13/30 4BHS15 17/404BHS15 25/55

0,550,751,11,52,22,20,550,751,11,52,22,23,04,00,751,11,52,22,23,04,01,52,23,04,05,5

2,02,53,44,56,16,12,02,53,44,56,16,18,110,62,53,44,56,16,18,110,64,56,18,110,614,5

1,752,43,44,46,06,01,752,43,44,46,06,08,510,82,43,44,46,06,08,510,84,46,08,510,814,5

W O

Pump type kW Absorbed Current (A)CapacitorµF Vc Single-phase

220V

PERFORMANCE TABLE


4BHS2 13/5M4BHS2 18/7M 4BHS2 27/11M4BHS2 36/15M4BHS2 44/22M4BHS2 51/22M4BHS4 7/5M4BHS4 10/7M4BHS4 15/11M4BHS4 20/15M4BHS4 24/22M4BHS4 29/22M

--

4BHS7 5/7M 4BHS7 7/11M4BHS7 10/15M4BHS7 12/22M4BHS7 14/22M

--

4BHS15 7/15M4BHS15 10/22M

---

0,550,751,11,52,22,20,550,751,11,52,22,2--

0,751,11,52,22,2--

1,52,2---

203040608080203040608080--

3040608080--

6080---

253540608080253540608080--

3540608080--

6080---

450450450450450450450450450450450450

--

450450450450450

--

450450

---

4,95,69,111,215,815,84,95,69,111,215,815,8

--

5,69,111,215,815,8

--

11,215,8

---

4,55,87,810,614,914,94,55,87,810,614,914,9

--

5,87,810,614,914,9

--

10,614,9

---

WW O O

107



108


PERFORMANCE CURVES 4BHS 2 series (according to ISO 9906 Annex A)

109



110



111



112

TIPO TIPO


Pump typemotore W

Dimensions (mm)

Single-phase4BHS2 13/5M4BHS2 18/7M 4BHS2 27/11M4BHS2 36/15M4BHS2 44/22M4BHS2 51/22M4BHS4 7/5M4BHS4 10/7M4BHS4 15/11M4BHS4 20/15M4BHS4 24/22M4BHS4 29/22M

--


--

4BHS15 7/15M4BHS15 10/22M

---

Three-phase4BHS2 13/54BHS2 18/7 4BHS2 27/114BHS2 36/154BHS2 44/224BHS2 51/224BHS4 7/54BHS4 10/74BHS4 15/114BHS4 20/154BHS4 24/224BHS4 29/224BHS4 36/304BHS4 48/404BHS7 5/74BHS7 7/114BHS7 10/154BHS7 12/224BHS7 14/224BHS7 18/304BHS7 23/404BHS15 7/154BHS15 10/224BHS15 13/30 4BHS15 17/404BHS15 25/55

1~773,5929,51152,51413,51677,51824,5647,5740,5879,51056,51215,51341,5

--

746,5843,5989

1158,51221,5

--

978,51221,5

---

3~753,5899,51118,51362,51602,51749,5627,5710,5845,51005,51140,51266,515181831716,5809,5938

1083,51146,513771606927,51146,5137716272125

1~14,518,222,927,532,935,713

15,819,523,127,629,2

--

14,51720

23,424,2

--

19,123,2

---

3~13,816,820,624,930,333,112,314,417,220,525

26,632,841,413,114,717,420,821,626,833

16,520,625,531,740,2

solo pompa6

8,211,113,816,519,34,55,87,79,411,212,815,520,24,55,26,37

7,89,511,85,46,88,2

10,514

Weight kgH

480,5606,5795,51005,51194,51341,5354,5417,5522,5648,5732,5858,51005,51278,5423,5486,5581

675,5738,5864,51053,5570,5738,5864,51074,51452,5

G1 1/4

G1 1/4

G1 1/4

G1 1/4

G1 1/4

G1 1/4

G1 1/2

G1 1/2

G1 1/2

G1 1/2

G1 1/2

G1 1/2

G1 1/2

G1 1/2

G2G2G2G2G2G2G2G2G2G2G2G2

H1 DNM

DIMENSIONAL TABLEPump type

motore ODimensions (mm)

Single-phase4BHS2 13/5M4BHS2 18/7M 4BHS2 27/11M4BHS2 36/15M4BHS2 44/22M4BHS2 51/22M4BHS4 7/5M4BHS4 10/7M4BHS4 15/11M4BHS4 20/15M4BHS4 24/22M4BHS4 29/22M

--


--

4BHS15 7/15M4BHS15 10/22M

---

Three-phase4BHS2 13/54BHS2 18/7 4BHS2 27/114BHS2 36/154BHS2 44/224BHS2 51/224BHS4 7/54BHS4 10/74BHS4 15/114BHS4 20/154BHS4 24/224BHS4 29/224BHS4 36/304BHS4 48/404BHS7 5/74BHS7 7/114BHS7 10/154BHS7 12/224BHS7 14/224BHS7 18/304BHS7 23/404BHS15 7/154BHS15 10/224BHS15 13/30 4BHS15 17/404BHS15 25/55

1~8029531177142217111858676764904

106512491375

--

770868

997,511921255

--

9871255

---

3~802928114213871661180867673986910301199132515821855745833

962,511421205144116309521205144116512099

1~13,616,921,425,832

34,812,114,518

21,426,728,3

--

13,215,518,322,523,3

--

17,422,3

---

3~13

15,819,824,230,733,511,513,416,419,825,42737

42,212,113,916,721,22231

33,815,821

29,732,536,4

solo pompa6

8,211,113,816,519,34,55,87,79,411,212,815,520,24,55,26,37

7,89,511,85,46,88,210,514

Weight kgH

480,5606,5795,51005,51194,51341,5354,5417,5522,5648,5732,5858,51005,51278,5423,5486,5581

675,5738,5864,51053,5570,5738,5864,51074,51452,5

G1 1/4

G1 1/4

G1 1/4

G1 1/4

G1 1/4

G1 1/4

G1 1/2

G1 1/2

G1 1/2

G1 1/2

G1 1/2

G1 1/2

G1 1/2

G1 1/2

G2G2G2G2G2G2G2G2G2G2G2G2

H1 DNM

SELECTION OF THE POWER CABLE

Example : Motor 1.1 kW - 220 V single phase - cable length 39 m. - 4x2.5 mm≤

Motor kW HP Cable type and length maximum limit

4x1 4x1.5 4x2.5 4x4 4x6 4x10 4x16Single phase 0.37 0.5 50 75 125 - - - -230 V - 50 Hz 0.55 0.75 38 57 95 152 - - -

0.75 1 30 45 75 120 174 - -1.1 1.5 22 33 53 85 127 210 -1.5 2 - 23 38 63 92 154 2462.2 3 - - 28 45 67 112 180

Three phase 0.55 0.75 164 246 - - - - -400 V - 50 Hz 0.75 1 133 200 333 - - - -

1.1 1.5 97 146 244 390 - - -1.5 2 72 109 180 290 435 - -2.2 3 51 78 130 207 310 516 -3 4 41 62 104 167 250 416 -

3.7 5.5 31 46 77 124 186 310 4965.5 7.5 33 56 90 135 225 360

Three phase 0.55 0.75 60 90 150 240 - - -230 V - 50 Hz 0.75 1 47 71 118 190 - - -

1.1 1.5 35 52 87 140 210 - -1.5 2 26 40 66 106 160 266 -2.2 3 - 29 48 76 115 191 3063 4 - - 37 60 90 150 240

3.7 5.5 - - 27 44 66 110 1765.5 7.5 - - - 32 48 80

128

113

IDROGO5” SUBMERSIBLE CENTRIFUGAL MULTISTAGE PUMPS



• Installation: in horizontal and vertical position • Maximum immersion: 20 m

(10 m with float switch)

MATERIALS• External casing, motor casing, casing cover

and closing ring in AISI 304 • Impeller, diffuser and spacer in tecnopolymer• Shaft in AISI 416• Upper mechanical seal in carbon/ceramic/NBR, lower mechanical seal in SiC/Carbon/NBR

TECHNICAL DATA• Asincronous 2 poles motor cooled by the pumped liquid• Insulation class F• Protection degree IP68 • 1~230V +- 10% 50Hz, 3~400V +-10% 50Hz • Permanent split capacitor and automatic thermal


for three-phase version • DNM 1”1/4

5" submersible centrifugal multistage pump made of stainless steel AISI 304 and noryl, suitable forthe movement of clean water from wells, tanks for irrigation systems. The double mechanical sealensures long life and improved reliability. There is no need for a starter box as the capacitors areinstalled in the pumping unit allowing a neater installation.

DIMENSIONAL TABLE

Pump type (mm)

Single-phaseIDROGO M 40/06*IDROGO M 40/08IDROGO M 40/10IDROGO M 40/12IDROGO M 40/15IDROGO M 80/12IDROGO M 80/15

-

Three-phase-

IDROGO 40/08IDROGO 40/10IDROGO 40/12IDROGO 40/15IDROGO 80/12IDROGO 80/15IDROGO 80/20

513513539590616540564590

1~

1315161718161718

3~

1315161718161718

Weight

H kg

* Supplied with 5 m cable lenght type HØ7RN-F

114

IDROGO5” SUBMERSIBLE CENTRIFUGAL MULTISTAGE PUMPS



IDROGO M 40/06IDROGO M 40/08IDROGO M 40/10IDROGO M 40/12IDROGO M 40/15IDROGO M 80/12IDROGO M 80/15

-


-IDROGO 40/08IDROGO 40/10IDROGO 40/12IDROGO 40/15IDROGO 80/12IDROGO 80/15IDROGO 80/20

0,450,6

0,750,91,10,91,11,5

3,84,35,76,87,36,47,5-

-1,92,22,43,02,33,13,5

33,143,354,164,975,7

---

30,840,250,260,270,345,657

68,4

27,836,345,454,563,6445566

2026,132,639,245,738,848,558,2

10,313,416,820,223,5324048

-----

23,228

34,8

-----

15,219

22,8

16162020

31,520

31,5-

450450450450450450450

-

400V1~ 3~ l/min

m3/h201,2

301,8

402,4

603,6

804,8

1006

1207,2

H=Total head

PERFORMANCE TABLE


115

SF66” BOREHOLE CENTRIFUGAL PUMPS

SPECIFICATIONS• Maximum liquid temperature: 30°C• Maximum sand content: 40 ppm

MATERIALS• Discharge and suction made of spheroidal nickeled

cast iron.• Pump casing, spacer rings for stage, wearing rings

check valve, cable guard and suction filter in AISI 304.• Impellers and diffusers in noryl.• Shaft in AISI 420

TECHNICAL DATA• 2 poles motor • Outlet: 2”1/2 SF6R10/13 and SF6S25 series

3” SF6S32/42 series

6” submersible pumps for water supply of domestic, agricultural and industrial use, pressure boost-ing units and irrigation systems.For more details, please call our Sale Dept.

116

Weightkg

SF66” BOREHOLE CENTRIFUGAL PUMPS

Pump typeSF6

Q=Capacity

R10-5/2.2R10-6/3R10-7/3R10-8/4R10-9/4R10-12/5.5R10-15/7.5R10-18/9.2R10-21/9.2R13-4/2.2R13-5/3R13-6/4R13-7/5.5R13-8/5.5R13-9/5.5R13-12/7.5R13-15/9.2R13-18/11R13-21/13R13-24/15S25-3/3S25-4/4S25-6/5.5S25-8/7.5S25-10/9.2S25-12/11S25-14/15S25-16/15S25-20/18.5S25-24/22S32-2/3S32-3/4S32-4/5.5S32-5/7.5S32-6/9.2S32-8/11S32-9/15S32-10/15S32-12/18.5S32-15/22S32-18/26S32-20/30S42-2/4S42-3/5.5S42-4/7.5S42-5/9.2S42-6/11S42-8/13S42-9/15S42-10/18.5S42-12/22S42-15/26S42-18/30

799511112614219023728433262789310912414018623327932637246619212215318423024530636732496581971301461621952432923242639526578104117130156195234

688195108122162203243284607590105120135180225270315360

---------------------------------

45546372811081351621894962748698111148185221258295405380106133159199212265318

-----------------------

2631364247627894109405060708090120150180210240385076101126151189202252302

-----------------------

---------

28354249566384105126147168354770941171401761872342812943577186114129143171214257286

-----------

--------------------

2938587796115144154192230263952657810411813115719623526122324354658697108130162194

--------------------

1621314252627883104125203141516182921021221531842041828374655748392110138166

------------------------------

13192632395158647796116129152330384661687691114137

------------------------------------------

12182430364854607290108

------------------------------------------812151923313539465869

l/minm3/h

00

1006

20012

25015

30018

40024

55033

70042

85051

100060

H=Total head

Lengthmm.

583621659697735848962107611905455836216596977358489621076119013045646217358489621076110

1304158418105135736326927528729329921112129215241644513573632692752872932992111212921524

11,512

12,513141618202211

11,512

12,5131416182022241112

13,516

17,519,52123

27,53110

10,511,513

14,515,516,517,519,522262810

10,51213

14,515,516,517,519,52226

117117


6" deep-well pumps entirely made of stainless steel AISI 304. The smooth surface of the impellersand diffusers offer an improved efficiency, and reliability factor. Applications include clean waterextraction from boreholes, pressure boosting for domestic, farming and industrial applications.Installation can be horizontal as well as vertical. The 6BHS can be fitted to any NEMA standard motor.

SPECIFICATIONS• Maximum immersion: 100 m (oil motor)

350 m (water motor) • Maximum liquid temperature: 30°C

MATERIALS• Bracket, suction and discharge ports, coupling, impeller,

diffuser, diffuser cover, valve, tie-rod and cable guard in AISI 304

• Liner ring in EPDM/AISI 304• Shaft in AISI 316

TECHNICAL DATA• 2 poles motor, water filled (W version)

or oil fillled (O version) • Maximum startings/hour: 25 (O version)

20 (W version) • Insulation class F• Protection degree IP58 • 3~ 380/400V (O version)

400V, +6% -10%, 50 Hz (W version)

118118



119


PERFORMANCE TABLEPump type Motor kW HP Q = Capacity

6BHS size l/min. 70 100 150 200 250 300 375 450 500m3/h 4,20 6,0 9,0 12,0 15,0 18,0 22,5 27,0 30,0

H = Total head

64BHS8 5 4” 1,5 2 54 49,5 39 22,5 - - - - -64BHS8 7 4” 2,2 3 75,5 69,5 54,5 31,5 - - - - -64BHS8 10 4” 3 4 108 99 77,5 45 - - - - -64BHS8 13 4” 4 5,5 140 129 101 58,5 - - - - -6BHS8 13 6” 4 5,5 140 129 101 58,5 - - - - -64BHS8 15 4” 5,5 7,5 162 149 116 67,5 - - - - -6BHS8 15 6” 5,5 7,5 162 149 116 67,5 - - - - -64BHS8 18 4” 5,5 7,5 194 178 140 81 - - - - -6BHS8 18 6” 5,5 7,5 194 178 140 81 - - - - -6BHS8 21 6” 7,5 10 227 208 163 94,5 - - - - -6BHS8 25 6” 7,5 10 270 248 194 113 - - - - -6BHS8 29 6” 9,2 12,5 313 287 225 131 - - - - -6BHS8 34 6” 11 15 367 337 264 153 - - - - -64BHS14 3 4” 1,5 2 - 29,5 27 23 18 11,5 - - -64BHS14 5 4” 2,2 3 - 49 45 38,5 30 19 - - -64BHS14 7 4” 3 4 - 68,5 63 54 42 26,5 - - -64BHS14 9 4” 4 5,5 - 88 81 69,5 54 34 - - -6BHS14 9 6” 4 5,5 - 88 81 69,5 54 34 - - -64BHS14 13 4” 5,5 7,5 - 127 117 100 78 49 - - -6BHS14 13 6” 5,5 7,5 - 127 117 100 78 49 - - -6BHS14 15 6” 7,5 10 - 147 135 116 90 56,5 - - -6BHS14 18 6” 7,5 10 - 176 162 139 108 68 - - -6BHS14 22 6” 9,2 12,5 - 216 198 170 132 83 - - -6BHS14 26 6” 11 15 - 255 234 201 156 98 - - -6BHS14 31 6” 15 20 - 304 279 239 185 117 - - -6BHS14 35 6” 15 20 - 343 315 270 209 132 - - -64BHS21 4 4” 3 4 - - 36,5 35,5 34 32 27,5 21 16,564BHS21 6 4” 4 5,5 - - 55 53 51 48 41,5 32 24,56BHS21 6 6” 4 5,5 - - 55 53 51 48 41,5 32 24,564BHS21 8 4” 5,5 7,5 - - 73,5 71 67,5 64 55 42 336BHS21 8 6” 5,5 7,5 - - 73,5 71 67,5 64 55 42 336BHS21 12 6” 7,5 10 - - 110 106 102 96 83 64 496BHS21 14 6” 9,2 12,5 - - 128 124 118 112 96 74 57,56BHS21 17 6” 11 15 - - 156 150 144 136 117 90 69,56BHS21 22 6” 15 20 - - 202 194 186 176 151 117 906BHS21 25 6” 15 20 - - 229 221 212 200 172 133 1036BHS21 29 6” 18,5 25 - - 266 256 245 232 200 154 1196BHS21 34 6” 22 30 - - 312 300 288 272 234 180 1396BHS21 36 6” 22 30 - - 330 318 305 288 248 191 148

120

PERFORMANCE CURVES 6BHS8 series (according to ISO 9906 Annex A)


121



122



123


124

Pump typePump type Motor sizeMotor size

kW HP DNM H1Weight

[ kgf ]H

Weight

[ kgf ]H

Weight

[ kgf ]

64BHS8-5/15 1,5 2 G 2 454,5 12,5 779 24,5 837 23

64BHS8-7/22 2,2 3 G 2 514,5 14,5 868 27,5 932 26,5

64BHS8-10/30 3 4 G 2 604,5 17 1025 34 1182 39,5

64BHS8-13/40 4 5,5 G 2 694,5 20 1275 43,7 1272 42,5

64BHS8-15/55 5,5 7,5 G 2 754,5 21,5 1450 51 1402 45

64BHS8-18/55 5,5 7,5 G 2 844,5 24 1540 53,5 1492 47,5

6BHS8-13/40 4 5,5 G 2 729 21 1311 59 1269 61

6BHS8-15/55 5,5 7,5 G 2 789 24 1404 64,5 1359 65

6BHS8-18/55 5,5 7,5 G 2 879 26,5 1494 66 1449 67,5

6BHS8-21/75 7,5 10 G 2 969 29,5 1616 73,5 1569 72

6BHS8-25/75 7,5 10 G 2 1089 33,5 1736 79 1689 77,5

6BHS8-29/92 9,2 12,5 G 2 1209 38,5 1888 85 1809 84

6BHS8-34/110 11 15 G 2 1359 45 2071 93 2059 91,5

64BHS14-3/15 1,5 2 G 2 1/2 394,5 10,5 719 22,5 777 21

64BHS14-5/22 2,2 3 G 2 1/2 454,5 12 808 25,5 872 24,5

64BHS14-7/30 3 4 G 2 1/2 514,5 14 935 30,5 1092 35,5

64BHS14-9/40 4 5,5 G 2 1/2 574,5 15,5 1155 40 1152 39

64BHS14-13/55 5,5 7,5 G 2 1/2 694,5 19 1390 49 1342 43

6BHS14-9/40 4 5,5 G 2 1/2 609 17 1191 54 1149 56,5

6BHS14-13/55 5,5 7,5 G 2 1/2 729 21 1344 62 1299 63

6BHS14-15/75 7,5 10 G 2 1/2 789 23 1436 68 1389 66,5

6BHS14-18/75 7,5 10 G 2 1/2 879 25,5 1526 70,5 1479 69

6BHS14-22/92 9,2 12,5 G 2 1/2 999 29,5 1678 76 1599 75,5

6BHS14-26/110 11 15 G 2 1/2 1119 33,5 1831 85 1819 84

6BHS14-31/150 15 20 G 2 1/2 1269 40,5 2046 96 2029 94,5

6BHS14-35/150 15 20 G 2 1/2 1389 44 2166 99 2149 97,5

64BHS21-4/30 3 4 G 2 1/2 474,5 11,5 895 28,5 1052 33,5

64BHS21-6/40 4 5,5 G 2 1/2 554,5 13,5 1135 38,5 1132 37

64BHS21-8/55 5,5 7,5 G 2 1/2 634,5 15,5 1330 45,5 1282 39,5

6BHS21-6/40 4 5,5 G 2 1/2 589 15 1171 52,3 1129 54,7

6BHS21-8/55 5,5 7,5 G 2 1/2 669 17 1284 58 1239 59

6BHS21-12/75 7,5 10 G 2 1/2 829 21,5 1476 67 1429 66

6BHS21-14/92 9,2 12,5 G 2 1/2 909 24 1588 72 1509 71

6BHS21-17/110 11 15 G 2 1/2 1029 26,5 1741 78 1729 77

6BHS21-22/150 15 20 G 2 1/2 1229 34,5 2006 89 1989 90

6BHS21-25/150 15 20 G 2 1/2 1349 38 2126 94 2109 93

6BHS21-29/185 18,5 25 G 2 1/2 1509 42,5 2351 104 2339 108

6BHS21-34/220 22 30 G 2 1/2 1709 48,5 2616 116 2599 119

6BHS21-36/220 22 30 G 2 1/2 1789 51 2696 118 2679 121

4"

6"

Pump without motorPump without motor

6"

4"

4 "

PowerPower Pump with water motor filledPump with water motor filled Pump with oil motor filledPump with oil motor filled

6"

DIMENSIONAL TABLE


125

Submersible pumps for clear and sump water suitable for domestic applications, drainage of floodedrooms, garden fountains, small irrigation and movement of rain water.

KIKASUBMERSIBLE PUMPS FOR CLEAR AND SUMP WATER

DN A B C D E F kg

KIKA 1” 240 370 165 220 185 270 3,7

SPECIFICATIONS• Maximum immersion depth: 4mts. • Maximum liquid temperature:


MATERIALS• Pump casing, strainer and impeller made in tecnopolymer• Shaft in stainless steel• Mechanical seal in carbon/ceramic

TECHNICAL DATA• Asincronous 2 poles motor 230V 50Hz• 1~230V +- 10% 50Hz, 3~400V +-10% 50Hz • Permanent split capacitor and automatic thermal

overload protection• Outlet: 1” suitable also for flexible pipe connection

Q = CapacityPump type INPUT W Capacitor INPUT L/min. 0 10 20 30 40 50 60 70 80 90

µF VcCurrent m3/h 0 0,6 1,2 1,8 2,4 3 3,6 4,2 4,8 5,4

(W) H = Total head

KIKA 230 8 450 1 A 6,4 5,7 5,2 4,7 4,2 3,7 3,2 2,8 2,3 1,8

PERFORMANCE TABLE

PERFORMANCE CURVE (according to UNI 9906 Annex A)

126

BEST ZEROSUBMERSIBLE SUMP PUMPS in AISI 304

SPECIFICATIONS • Maximum liquid temperature:


• Maximum immersion: 5 m • Maximum passage of solids: 10 mm

MATERIALS• Pump casing, strainer, cover and motor casing in AISI 304 • Impeller, diffuser and spacer in tecnopolymer• Shaft in AISI 303• Grease lubrificated double lip seal

TECHNICAL DATA• Asincronous 2 poles motor • Insulation class F• Protection degree IP68 • 1~230V ± 10%, 50Hz • DNM 1”1/4

Submersible sump pumps suitable for draining garages, cellars and other places subjected to flood-ing and for garden ponds and small water displays. They can be applied for portable and fixed instal-lations. Supplied with 5 m cable lenght type H05 RN-F and available with or without float switch. (10 m cable H05 RN-F on request)

0,95

kg4,44,24,4

Weight

8 450

127

BEST ZERO

Pump type kW Capacitor Abs. Curr. (A) Q=Capacity

µF VcSingle-phase230 V

BEST ZERO M

Three-phase400 V

BEST ZERO 0,25 1,9 7 6,3 5,4 4,3 3,1 1,5

Single-phase

Three-phase

l/minm3/h

201,2

503

754,5

1006

1257,5

1509

H=Total head

Pump type

BEST ZERO MABEST ZERO MBEST ZERO

PERFORMANCE CURVE (according to ISO 9906 Annex A)

PERFORMANCE TABLE

SUBMERSIBLE SUMP PUMPS in AISI 304

MA = only for single-phasewith float switch

128

BEST ONESUBMERSIBLE SUMP PUMPS in AISI 304

SPECIFICATIONS• Maximum liquid temperature: 35°C according EN 60335-2-41 for domestic uses 40°C for other uses


20 mm per VOX version

MATERIALS• Pump casing, impeller strainer, cover,

casing cover and motor casing in AISI 304 • Shaft in AISI 303• Double lip seal with interposed oil chamber

TECHNICAL DATA• Asincronous 2 poles motor • Insulation class F• Protection degree IP68 • 1~230V ± 10%, 50Hz • DNM 1” 1/4

Submersible drainage sump pump made of stainless steel AISI 304, shaft sealing is with double lipseals that run on a ceramic-coated shaft. Suitable for draining wells, plant room sumps, and liftshafts, emptying, pools, sumps, small-scale irrigation and small water displays and pub cellars.Options include with - without float switch - VOX versions and 110 - 230 - 400V versions.(10 m cable H05 RN-F on request)

DIMENSIONAL TABLE

Pump type (mm)

BEST ONEBEST ONE VOX

260285

220245

H H1

1020

S

450450

88

129

BEST ONE


Pump type kW Capacitor Abs. Current (A) Q=Capacity

µF VcSingle-phase230V

BEST ONE MBEST ONE VOX M

Three-phase400V

BEST ONEBEST ONE VOX

0,250,25

2,22,0

1,11,0

8,36

7,85,6

6,34,8

4,53,5

2,42

1,81,5

Single-phase

Three-phase

l/minm3/h

201,2

402,4

804,8

1207,2

1609,6

17010,2

H=Total head

SUBMERSIBLE SUMP PUMPS in AISI 304

PERFORMANCE TABLE

130

BEST 2-3-4-5SUBMERSIBLE SUMP PUMPS in AISI 304

SPECIFICATIONS • Maximum liquid temperature:



MATERIALS• Pump casing, impeller, strainer, cover,

casing cover and motor casing in AISI 304 • Shaft in AISI 303• Double mechanical seal with interposed oil chamber

upper in carbon-caramic/NBR - lower in SiC/SiC/NBR

TECHNICAL DATA• Asincronous 2 poles motor • Insulation class F• Protection degree IP68 • 1~230V ± 10%, 50Hz - 3~400V ± 10%, 50Hz• Permanent split capacitor and automatic thermal



Submersible sump pump made of stainless steel AISI 304, double mechanical seals ensure long lifeand reliability. Suitable for draining wells, plant room sump, lift shaft emptying, pools, sumps, irriga-tion, and water displays. Options include with - without float switch. Solids handling up to 10 mm

DIMENSIONAL TABLE

Pump type (mm)

BEST 2BEST 3BEST 4BEST 5

352352377377

315315340340

1212,713813,5

Weight

H H1 kg

131

BEST 2-3-4-5SUBMERSIBLE SUMP PUMPS in AISI 304




BEST 2 MBEST 3 MBEST 4 M

-


BEST 2 BEST 3 BEST 4 BEST 5

0,550,751,11,5

4,45,67,3-

2,02,43,03,3

12,213,617,418,4

9,811,115

16,1

8,39,513,414,5

6,37,611,312,5

2,94

7,59

-3,26,78

--

4,66

---5

1620

31,5-

450450450

-

1~ 3~ l/minm3/h

201,2

804,8

1207,2

17010,2

26015,6

28016,8

33019,8

36021,6

H=Total head

PERFORMANCE TABLE

132

RIGHTSUBMERSIBLE PUMPS for dirty water

SPECIFICATIONS• Maximum liquid temperature: 50°C • Maximum immersion: 10 m • Maximum passage of solids: 35 mm

MATERIALS• Pump casing, impeller, cover,

casing cover and motor casing in AISI 304 • Shaft in AISI 303• Double mechanical seal with interposed

oil chamber: upper in carbon/ceramic/NBR, lower in Sic/SiC/NBR

TECHNICAL DATA• Asincronous 2 poles motor • Insulation class F• Protection degree IP68 • 1~230V ± 10%, 50Hz - 3~400V ± 10%, 50Hz• Permanent split capacitor and automatic thermal



Submersible dirty water pump made of stainless steel AISI 304, double mechanical seals ensure longlife and reliability. Suitable for dirty water systems with some solids. Applications include wastewatertreatment plants and final effluent pumping, irrigation, and water displays. Options include with -without float switch. Solids handling up to 35 mm.

DIMENSIONAL TABLEPump type (mm)

RIGHT 75RIGHT 100

405430

480500

1011,5

Weight

H H2 kg

133

RIGHT

Pump type kW Capacitor Absorbed Current(A) Q=Capacity


RIGHT 75 MRIGHT 100 M


RIGHT 75 RIGHT 100

0,550,75

4,85,7

2,12,6

7,89,5

6,88,6

6,28,1

5,77,6

4,76,6

3,45,4

24,2

-2

2031,5

450450

1~ 3~ l/minm3/h

402,4

804,8

1006

1207,2

1609,6

20012

24014,4

30018

H=Total head


PERFORMANCE TABLE

SUBMERSIBLE PUMPS for dirty water

134

DW - DW VOXSUBMERSIBLE PUMPS for dirty water

SPECIFICATIONS • Maximum liquid temperature: 40°C • Maximum immersion: 10 m • Maximum passage of solids: 50 mm

MATERIALS• Pump casing, impeller, cover, casing cover

and motor casing in AISI 304 • Shaft in AISI 303• Double mechanical seal with interposed oil chamber:

upper in carbon/ceramic/NBR, lower in Sic/SiC/NBR

TECHNICAL DATA• Asincronous 2 poles motor • Insulation class F• Protection degree IP68 • 1~230V ±10% 50Hz - 3~400V ± 10% 50Hz• Permanent split capacitor and automatic thermal


for three-phase version • DNA 50-DNM 2”• DNM 50PN10 (F version)

Submersible sewage pump made of stainless steel AISI 304, with double mechanical seals ensurelong life and reliability. Suitable for sewage and dirty water systems with solids. Applications includeremote sewage stations for housing developments, pubs, hotels and restaurants, and water displays.Options include with - without float switch. Solids handling up to 50 mm.

DIMENSIONAL TABLE

Pump type WeightDimensions (mm)

485515515515545

DW 75DW 100DW 150DW 200DW 300

1618202026

H kg

Weight

kg


DW VOX 75DW VOX 100DW VOX 150DW VOX 200DW VOX 300

485515515515545

H

1618202026

135

DW - DW VOX


SUBMERSIBLE PUMPS for dirty water


µF Vc400V

1~ 3~l/minm3/h

1006

20012

30018

40024

50030

60036

70042

80048

90054

H=Total head


DW 75 DW 100 DW 150 DW 200DW 300 DW VOX 75 DW VOX 100 DW VOX 150 DW VOX 200DW VOX 300


DW 75 MDW 100 MDW 150 M

--

DW VOX 75 MDW VOX 100 MDW VOX 150 M

--

0,550,751,11,52,2

0,550,751,11,52,2

2025

31,5--

2025

31,5--

450450450

--

450450450

--

3,95,97,3--

3,95,87,3--

1,52,12,83,65,01,42,12,83,34,4

810,613,116,6206,37,910,212,515,7

6,38,711,315

18,35

6,79

11,214,7

4,87,19,513,316,63,55,37,69,813,9

3,45,57,711,415,11,63,76,18,312,6

2,24

5,99,513,3

-1,94,16,410,7

-2,64,27,511,3

--

2,14,28,4

--

2,45,49,3---

1,66,1

---

3,37,2----

3,6

---5------

PERFORMANCE TABLE

DWDW VOX

DWFDW VOX F

DW FZDW VOX FZ

DWDW VOX

136

DMLSUBMERSIBLE PUMPS for dirty water

SPECIFICATIONS• Maximum water temperature: 40°C• Maximum passage of solids: 76 mm

MATERIALS• Pump casing, impeller and elbow: cast iron• Shaft in AISI 403• Mechanical seal:

- SiC/SiC/NBR (pump side)- Carbon/Ceramic/NBR (motor side)

TECHNICAL DATA• 4 poles motor• Insulation class F• protection degree IP68• 3~ 400V, 50 Hz• DN80, DN100, DN150 flanges• Power up to 22 kW

Submersible sewage pumps made of cast iron, suitable for sewage and dirty water systems withsolids, waste water, removal of treated liquid waste and tank emptying and general dirty water duties.(Kit discharge connector on request)

137


PERFORMANCE CURVES 80DML (according to ISO 9906 Annex A)

Pump type Q=Capacity

DML kW HPl/min 0 200 400 600 800 1000 1200 1400 1600m3/h 0 12 24 36 48 60 72 84 96

H=total head [m]

80DML52.2 2.2 3 13.1 11.2 9.6 8.2 7.1 6.2 5.5 4.9 4

80DML53.7 3.7 5 17.9 15.8 14.2 12.8 11.7 10.7 9.7 8.8 7.9

138




DML kW HPl/min 0 500 1000 1300 1600 1900 2200 2400 2500m3/h 0 30 60 78 96 114 132 144 150

H=total head [m]

100DML53.7 3.7 5 17.9 13.5 10.7 9.3 7.9 6.5 5 4 –

100DML55.5 5.5 7.5 22 17.9 14.9 13.4 11.9 10.6 9.3 8.5 –

100DML57.5 7.5 10 25.3 20.6 18 16.7 15.5 14.2 13 12.1 –

100DML511 11 15 30.3 27.5 25.2 23.7 22.2 20.7 19.1 18 17.5

100DML515 15 20 35 33.5 31.3 29.8 28.3 26.7 25.1 24 23.4

100DML522 22 30 40 38.5 36.4 34.9 33.3 31.7 30 28.7 28

139




DML kW HPl/min 0 1000 2000 2500 3000 3400 4000 4500 5000 5500m3/h 0 60 120 150 180 204 240 270 300 330

H=Total head [m]

150DML55.5 5.5 7.5 22 14.9 10.1 8 5.9 3.9 – – – –

150DML57.5 7.5 10 25.3 18 13.7 11.6 9.5 7.5 4 – – –

150DML511 11 15 30.3 25.2 20.2 17.5 14.7 12.2 8.6 5.4 – –

150DML515 15 20 35 31.3 26.1 23.4 20.6 18.2 14.8 11.9 8.6 –

150DML522 22 30 40 36.4 31.1 28 25.2 22.9 19.5 16.8 13.8 10.5

140

Pump type Dimensions WeightDML DA kW A B C D E F H J L1 L2 kg

80DML52.5 80 2.2 542 320 385 157 285 308 668 210 279 547 8080DML53.7 80 3.7 542 320 385 157 285 308 727 210 279 627 87100DML53.7 100 3.7 582 320 425 157 315 313 727 210 279 627 89100DML55.5 100 5.5 658 381 470 188 360 339 824 255 310 724 121100DML57.5 100 7.5 658 381 470 188 360 339 824 255 310 724 125100DML511 100 11 751 455 530 221 420 355 938 315 329 778 160100DML515 100 15 751 455 530 221 420 355 938 315 329 778 166100DML522 100 22 795 497 550 245 440 358 1021 335 342 841 226150DML55.5 150 5.5 715.5 381 527.5 188 385 369 824 255 310 724 127150DML57.5 150 7.5 715.5 381 527.5 188 385 369 824 255 310 724 132150DML511 150 11 808.5 455 587.5 221 445 385 938 315 329 778 166150DML515 150 15 808.5 455 587.5 221 445 385 938 315 329 778 172150DML522 150 22 852.5 497 607.5 245 465 388 1021 335 342 841 232

*


DIMENSIONS

FLANGES

DA DG DE DF DT

80 138 160 200 22100 158 180 220 24150 212 240 285 26

* LWL = Low water level

DIMENSIONAL TABLE

141


Spazio minimodi manovra

KIT DISCHARGE CONNECTOR DIMENSIONS LM8080 (100) DML 52.2, 53.7

FLANGES

DA DG DE DF DT

80 138 160 200 22100 158 180 220 24

DIMENSIONAL TABLEPump type Dimensions Kit discharge Weight

DML A P1 P2 G1 G2 F H1 H2 L1 L6 BN1 BN2 D1 E1 connector kg80DML52.2 492 75 90 125 165 295 175 230 279 7 75 90 15 155 LM80 1780DML53.7 492 75 90 125 165 295 175 230 279 7 75 90 15 155 LM80 17100DML53.7 492 75 90 125 195 300 175 230 279 7 75 90 15 155 LM80 17

* LWL = Low water level

*

Minimum manholedimensions in floorframe installation

142

Spazio minimodi manovra

KIT DISCHARGE CONNECTOR DIMENSIONS LL100100 (150) DML

FLANGES

DA DG DE DF DT

100 158 180 220 24150 212 240 285 26

DIMENSIONAL TABLEPump type Dimensions Kit discharge Weight

DML A P1 P2 G1 G2 F H1 H2 L1 L6 BN1 BN2 BM DM I D1 E1 connector kg100DML55.5 628 105 105 185 210 370 240 265 310 31 100 40 220 800 700 19 175 LL100 46100DML57.5 628 105 105 185 210 370 240 265 310 31 100 40 220 800 700 19 175 LL100 46100DML511 721 105 105 185 210 370 240 265 329 15 100 40 220 1000 700 19 175 LL100 46100DML515 721 105 105 185 210 370 240 265 329 15 100 40 220 1000 700 19 175 LL100 46100DML522 765 105 105 185 210 370 240 265 342 12 100 40 220 1000 700 19 175 LL100 46150DML55.5 628 105 105 185 235 400 240 265 310 31 100 40 220 800 700 19 175 LL100 46150DML57.5 628 105 105 185 235 400 240 265 310 31 100 40 220 800 700 19 175 LL100 46150DML511 721 105 105 185 235 400 240 265 329 15 100 40 220 1000 700 19 175 LL100 46150DML515 721 105 105 185 235 400 240 265 329 15 100 40 220 1000 700 19 175 LL100 46150DML522 765 105 105 185 235 400 240 265 342 12 100 40 220 1000 700 19 175 LL100 46


Minimum manholedimensions in floorframe installation

143

LPSIN-LINE CENTRIFUGAL PUMPS in AISI 304

SPECIFICATIONS • Maximum positive suction pressure:

2 bar for all single-phase and for LPS 25 three-phase, 4 bar for LPS 32-40-50 three-phase

• Maximum liquid temperature: 100°C

MATERIALS• Pump casing, impeller and casing cover in AISI 304 • Shaft in AISI 303• Bracket and motor casing in alluminium• Mechanical seal in carbon/ceramic/NBR

TECNICAL DATA• Asincronous 2 poles motor • Insulation class F• Protection degree IP55 • 1~230V ± 10% 50Hz - 3~400V ± 10% 50Hz• Permanent split capacitor and automatic thermal


for three-phase version • Flange: PN10

In-line centrifugal pumps made of stainless steel AISI 304. Applications include chilled water, air-con-ditioning systems and heating systems for secondary hot water and general low-pressure applicationsin industry. Its light construction means installation can be achieved with 1 person where conven-tionally heavy cast iron & bronze pumps require additional personnel and lifting equipment.

DIMENSIONAL TABLEPump type Dimension (mm)

LPS 25/08 LPS 25/15LPS 25/25LPS 32/25 LPS 32/40LPS 40/25LPS 40/40LPS 40/75LPS 50/40LPS 50/75

LPS 50/150

300300300305305305305305310310310

320,5320,5320,5340340345345345

357,5357,5389,5

171171171171171171171171171171194

1~PG11PG11PG11PG11PG11PG11PG11PG11PG11PG11

PG13,5

181181181181181181181181181181213

2525253232404040505050

2525253232404040505050

115115115140140150150150165165165

858585

100100105105105120120120

858585

100100110110110125125125

E B H3 H4 T DNA DNM D1 D2 D3

1414141818181818181818

S

12,812,812,914,614,613,014,013,014,515,018,5

Weightkg

144



LPS 25/08 M LPS 25/15 MLPS 25/25 MLPS 32/25 MLPS 32/40 MLPS 40/25 MLPS 40/40 MLPS 40/75 MLPS 50/40 MLPS 50/75 M

LPS 50/150 M


LPS 25/08 LPS 25/15LPS 25/25LPS 32/25 LPS 32/40LPS 40/25LPS 40/40LPS 40/75LPS 50/40LPS 50/75

LPS 50/150

0,080,150,250,250,4

0,250,4

0,750,4

0,751,5

1,511,672,042,0

2,741,982,754,862,744,9

8,07

1,71,81,91,82,21,92,24,02,23,95,7

1,011,031,111,031,251,091,252,291,252,263,31

6,59,3

12,5--------

57,811,110,714,5

------

2,44,98,49,1

12,77,811,316,6

---

---

7,210,67,1

10,416---

---

5,99,26,69,9

15,29,1

13,819,8

---

3,97

5,68,7

14,18,8

13,319,3

-----

3,76,9

12,37,4

12,318,7

------

4,410,15,9

10,717,8

--------

3,58,216

---------5

13,7

12,512,512,512,512,512,512,525

12,52535

450450450450450450450450450450450

230V 400V1~ 3~ l/min

m3/h201,2

402,4

704,2

1006

1207,2

1509

20012

25015

32019,2

40024

H=Total head


PERFORMANCE TABLE

145


PERFORMANCE CURVES LPS 25 series (according to ISO 9906 Annex A)

146



147



148



149

IN-LINE CENTRIFUGAL PUMPS in cast iron

SPECIFICATIONS• Maximum positive suction pressure

10 bar for all models6 bar for LPC 40-100

• Maximum liquid temperature: -10°C +130°C

MATERIALS• Pump casing, impeller and casing cover in cast iron• Shaft in AISI 420• Bracket and motor casing in alluminium• Mechanical seal in Carbon/SiC/EPDM

(SiC/SiC/EPDM optional)

TECHNICAL DATA• Asynchronous 2 and 4 poles motor• Insulation Class F• Protection Degree IP 54• 3~ 230/400V ±10% 50 Hz up to 5.5 kW,

400-690V ±10% 50 Hz above• Thermal protection to be provided by the user for three-

phase version• PN10 Flanges

In-line centrifugal pumps made of cast iron. Applications include heating and air conditioning sys-tems, water lifting from wells, rivers and lakes, irrigation system on ground surface or by sprinkling,pressure systems, industrial services, domestic hot water supply systems.

LPC-LPC4, LPCD-LPCD4

150



PERFORMANCE CHART LPC series 2 POLES

R.P.M. ≈ 2900 min-1

Fluid test: clean water 20°CApplicable standard: UNI EN ISO 9906 Annex A

TOTA

LHEA

D

151



PERFORMANCE TABLE LPC 40-50-65-80-100 series 2 POLES

Pump type

Motor Q=Capacitym3/h 0 6 7.5 9 10.5 12 13.5 15 18 21 24 27 30 36 42 48 54 60 66 75 90 105 120 135 150 165 180 210l/min 0 100 125 150 175 200 225 250 300 350 400 450 500 600 700 800 900 1000 1100 1250 1500 1750 2000 2250 2500 2750 3000 3500

kW HP H=Total head [m]LPC 40-100/0,55 0.55 0.75 12.2 11.7 11.4 11 10.5 9.9 9.3 8.5 7 - - - - - - - - - - - - - - - - - - -

LPC 40-100/0,75 0.75 1.0 14 13.5 13.3 13 12.5 12 11.4 10.7 9 7 - - - - - - - - - - - - - - - - - -

LPC 40-125/0,75 0.75 1.0 16.9 15.3 14.5 13.7 12.8 11.5 10.4 9 6 - - - - - - - - - - - - - - - - - - -

LPC 40-125/1,1 1.1 1.5 21.5 20.5 19.7 19 18.1 17.1 15.9 14.5 11.2 7.5 - - - - - - - - - - - - - - - - - -

LPC 40-125/1,5 1.5 2 25 24.5 24.1 23.5 22.9 22 20.8 19.5 16.5 13 - - - - - - - - - - - - - - - - - -

LPC 40-160/2,2 2.2 3 29 28.5 28 27.4 26.5 25.5 24.4 23.1 20 15 - - - - - - - - - - - - - - - - - -

LPC 40-160/3 3 4 34.5 33.5 33 32.5 31.8 31 30 29 26 22.5 - - - - - - - - - - - - - - - - - -

LPC 40-160/4 4 5.5 38.5 38 37.5 36.8 36 35 33.8 32.6 29.9 26.5 - - - - - - - - - - - - - - - - - -

LPC 40-200/4 4 5.5 47.5 47 46. 46 45 44 43 42 39.2 36.1 33 - - - - - - - - - - - - - - - - -

LPC 40-200/5,5 5.5 7.5 55.5 55 54.5 54.1 53.6 53 52 51 48.4 45.8 42.5 - - - - - - - - - - - - - - - - -

LPC 40-200/6,3 6.3 8.5 62.5 62 61.5 61 60.2 59 58.3 57.2 55 52 49 45 - - - - - - - - - - - - - - - -

LPC 50-125/1,5 1.5 2 16.8 - - - - 16 15.7 15.5 15 14.2 13.2 11.9 10.5 7 - - - - - - - - - - - - - -

LPC 50-125/2,2 2.2 3 20 - - - - 19.5 19.3 19.1 18.5 17.5 16.6 15.5 14.1 10.5 - - - - - - - - - - - - - -

LPC 50-125/3 3 4 25 - - - - 24.7 24.6 24.5 24.2 23.7 23 21.8 20.5 17 - - - - - - - - - - - - - -

LPC 50-160/3 3 4 31 - - - - 30.5 30.2 29.9 29 27.8 26.5 24.9 23 18 - - - - - - - - - - - - - -

LPC 50-160/4 4 5.5 38 - - - - 37 36.8 36.5 35.5 34.6 33.5 32.2 30.7 26.5 - - - - - - - - - - - - - -

LPC 50-200/5,5 5.5 7.5 46.8 - - - - 46 45.7 45.2 44.2 42.9 41 39.2 37 31 - - - - - - - - - - - - - -

LPC 50-200/6,3 6.3 8.5 51.7 - - - - 51.2 51 50.8 50 48.7 47 45 42.6 37 - - - - - - - - - - - - - -

LPC 50-200/7,5 7.5 10 58.5 - - - - 57.5 57.2 56.8 55.6 54.2 52.8 51 49 44 - - - - - - - - - - - - - -

LPC 65-125/2,2 2.2 3 18.5 - - - - - - - - 17.5 17 16.5 16 14.8 13 11 9 - - - - - - - - - - -

LPC 65-125/3 3 4 22.5 - - - - - - - - - 21 20.6 20.1 19 17.6 16 14 12 - - - - - - - - - -

LPC 65-125/4 4 5.5 26.3 - - - - - - - - - 25.5 25.2 24.8 24 22.9 21.5 19.6 17.5 - - - - - - - - - -

LPC 65-160/5,5 5.5 7.5 33 - - - - - - - - - 32.3 32 31.5 30.8 29.5 28 25.8 23.5 - - - - - - - - - -

LPC 65-160/7,5 7.5 10 37 - - - - - - - - - 36.7 36.4 36 35.2 34.1 32.8 31 28.8 26 - - - - - - - - -

LPC 65-200/10 10 13.6 52 - - - - - - - - - 51 50 49.2 48 45.5 43 39.7 36 31.5 - - - - - - - - -

LPC 65-200/12,5 12.5 17 58.5 - - - - - - - - - 57.5 57 56.5 55 53 50 46.5 42.5 38 - - - - - - - - -

LPC 80-160/10 10 13.6 31 - - - - - - - - - - - - - 30.5 30 29.5 29 28.3 27 24 20.2 16 - - - - -

LPC 80-160/12,5 12.5 17 37 - - - - - - - - - - - - - 36 35.5 35 34.5 34 32.8 30 27 23 19 - - - -

LPC 80-160/15 15 20 42 - - - - - - - - - - - - - 41 40.5 39.9 39.2 38.6 37.5 35.5 32.5 29 24 - - - -

LPC 80-200/15 15 20 44.2 - - - - - - - - - - - - - 44 43.8 43.4 43 42.5 41.5 39 35.5 31.5 - - - - -

LPC 80-200/18,5 18.5 25 51 - - - - - - - - - - - - - 50.5 50.1 49.9 49.5 49 48.3 46.3 43.2 39.5 35 - - - -

LPC 80-200/22 22 30 57.2 - - - - - - - - - - - - - 56.8 56.6 56.3 56 55.7 55 53.5 51 47.8 42.5 - - - -

LPC 100-160/10 10 13.6 24.8 - - - - - - - - - - - - - - - - 24 23.6 23 22 20.7 19.5 18.1 16.5 15 - -

LPC 100-160/12,5 12.5 17 29.5 - - - - - - - - - - - - - - - - 28.5 28.2 27.9 27 25.8 24.5 23 21.5 20 18.5 -

LPC 100-160/15 15 20 35 - - - - - - - - - - - - - - - - 34 33.8 33.3 32.5 31.7 30.5 29.2 27.6 26 24.5 -

LPC 100-200/18,5 18.5 25 42.3 - - - - - - - - - - - - - - - - 41.8 41.5 41 40 38.6 37 35 33 30.5 28 -

LPC 100-200/22 22 30 47.3 - - - - - - - - - - - - - - - - 47 46.7 46.3 45.5 44.4 43 41.2 39 36.7 34 -

LPC 100-200/30 30 40 55.5 - - - - - - - - - - - - - - - - - - 54 53 52 50.5 49 47 45 42.5 37

LPC 100-200/37 37 55 57.2 - - - - - - - - - - - - - - - - - - 56.7 56.3 55.8 55 53.8 52.3 50.5 48 42

LPC 100-250/37 37 55 68.5 - - - - - - - - - - - - - - - - - - 67.5 67 66.2 65 63.3 61 58.2 55 47

152



PERFORMANCE CHART LPCD series 2 POLES

R.P.M. ≈ 2900 min-1


TOTA

LHEA

D

153



PERFORMANCE TABLE LPCD 40-50-65-80-100 series 2 POLES

Automatic operation of no-return valve

Left pump in operation Right pump in operation Parallel operation

Pump type

Motor Q=Capacitym3/h 0 6 7.5 9 10.5 12 13.5 15 18 21 24 27 30 36 42 48 54 60 66 75 90 105 120 135 150 165l/min 0 100 125 150 175 200 225 250 300 350 400 450 500 600 700 800 900 1000 1100 1250 1500 1750 2000 2250 2500 2750

kW HP H=Total head [m]LPCD 40-125/0,55 0.55 0.75 14.2 12.5 11.6 10.6 9.7 8.5 7.4 6.2 - - - - - - - - - - - - - - - - - -

LPCD 40-125/0,75 0.75 1.0 16.9 15.3 14.5 13.7 12.8 11.5 10.4 9 6 - - - - - - - - - - - - - - - - -

LPCD 40-125/1,1 1.1 1.5 21.5 20.5 19.7 19 18.1 17.1 15.9 14.5 11.2 7.5 - - - - - - - - - - - - - - - -

LPCD 40-125/1,5 1.5 2 25 24.5 24.1 23.5 22.9 22 20.8 19.5 16.5 13 - - - - - - - - - - - - - - - -

LPCD 50-125/1,5 1.5 2 16.8 - - - - 16 15.7 15.5 15 14.2 13.2 11.9 10.5 7 - - - - - - - - - - - -

LPCD 50-125/2,2 2.2 3 20 - - - - 19.5 19.3 19.1 18.5 17.5 16.6 15.5 14.1 10.5 - - - - - - - - - - - -

LPCD 50-125/3 3 4 25 - - - - 24.7 24.6 24.5 24.2 23.7 23 21.8 20.5 17 - - - - - - - - - - - -

LPCD 50-160/3 3 4 31 - - - - 30.5 30.2 29.9 29 27.8 26.5 24.9 23 18 - - - - - - - - - - - -

LPCD 50-160/4 4 5.5 38 - - - - 37 36.8 36.5 35.5 34.6 33.5 32.2 30.7 26.5 - - - - - - - - - - - -

LPCD 65-160/3 3 4 24 - - - - - - - - 23 22.5 22 21.3 19.7 17.2 14.5 - - - - - - - - - -

LPCD 65-160/4 4 5.5 27.5 - - - - - - - - 27 26.6 26 25.5 24.2 22.5 20.2 16.8 - - - - - - - - -

LPCD 65-160/5,5 5.5 7.5 33 - - - - - - - - - 32.3 32 31.5 30.8 29.5 28 25.8 23.5 - - - - - - - -

LPCD 65-160/7,5 7.5 10 37 - - - - - - - - - 36.7 36.4 36 35.2 34.1 32.8 31 28.8 26 - - - - - - -

LPCD 80-160/7,5 7.5 10 26.2 - - - - - - - - - - - - 25.5 25.2 24.7 24 23.3 22.3 20.5 16.9 12.5 - - - -

LPCD 80-160/10 10 13.6 31 - - - - - - - - - - - - - 30.5 30 29.5 29 28.3 27 24 20.2 16 - - -

LPCD 80-160/12,5 12.5 17 37 - - - - - - - - - - - - - 36 35.5 35 34.5 34 32.8 30 27 23 19 - -

LPCD 80-160/15 15 20 42 - - - - - - - - - - - - - 41 40.5 39.9 39.2 38.6 37.5 35.5 32.5 29 24 - -

LPCD 100-200/12,5 12.5 17 34 - - - - - - - - - - - - - - - - 33 32.7 32 30.7 29 27 24.6 22 19

LPCD 100-200/15 15 20 39 - - - - - - - - - - - - - - - - 38.5 38.2 37.7 36.4 34.8 33 31 28.6 26

154



PERFORMANCE CHART LPC4 series 4 POLES

R.P.M. ≈ 1450 min-1


TOTA

LHEA

D

155



PERFORMANCE TABLE LPC4 40-50-65-80-100 series 4 POLES

Pump type

Motor Q=Capacitym3/h 0 2.4 3 4.5 6 7.5 9 10.5 12 13.5 15 18 21 24 27 30 36 42 48 54 60 66 72 78 90 105 120 135

l/min 0 40 50 75 100 125 150 175 200 225 250 300 350 400 450 500 600 700 800 900 1000 1100 1200 1300 1500 1750 2000 2250kW HP H=Total head [m]

LPC4 40-100/0,25 0.25 0.33 3.7 3.6 3.55 3.5 3.3 2.9 2.5 2 1.5 - - - - - - - - - - - - - - - - - - -

LPC4 40-125/0.25 R 0.25 0.33 4.8 4.5 4.4 4.1 3.7 3 2.2 - - - - - - - - - - - - - - - - - - - - -

LPC44 40-125/0.25 0.25 0.33 6.3 - 6.2 6 5.7 5.2 4.5 3.9 2.8 - - - - - - - - - - - - - - - - - - -

LPC4 40-160/0.37 0.37 0.55 9.6 - 9.4 9.2 8.9 8.4 7.7 6.9 5.8 4.7 - - - - - - - - - - - - - - - - - -

LPC4 40-200/0.75 0.75 1.0 13.5 - - 12.8 12.4 11.9 11.3 10.6 9.8 9 8 6 - - - - - - - - - - - - - - - -

LPC4 40-200/0.92 0.92 1.25 15 - - 14.6 14.3 13.8 13.3 12.7 11.8 10.9 10 8 - - - - - - - - - - - - - - - -

LPC4 50-125/0.25 0.25 0.33 4.8 - - - 4.6 4.5 4.3 4.1 3.9 3.6 3.3 2.4 - - - - - - - - - - - - - - - -

LPC4 50-125/0.37 0.37 0.55 6.4 - - - 6.3 6.2 6.1 6 5.8 5.6 5.3 4.6 3 - - - - - - - - - - - - - - -

LPC4 50-160/0.55 0.55 0.75 9.2 - - - 8.8 8.6 8.4 8.1 7.7 7.3 6.8 5.8 4.4 - - - - - - - - - - - - - - -

LPC4 50-200/1.1 R 1.1 1.5 12.9 - - - 12.7 12.5 12.1 11.7 11.2 10.7 10.1 8.5 6.8 - - - - - - - - - - - - - - -

LPC4 50-200/1.1 1.1 1.5 14.5 - - - 14.2 14 13.8 13.4 13 12.5 11.8 10.2 8.3 6 - - - - - - - - - - - - - -

LPC4 65-125/0.37 0.37 0.55 5.4 - - - - - 5.3 5.25 5.2 5.1 5 4.8 4.5 4.1 3.6 - - - - - - - - - - - - -

LPC4 65-125/0.55 0.55 0.75 6.5 - - - - - 6.4 6.3 6.2 6.1 6 5.8 5.5 5.2 4.9 4.4 - - - - - - - - - - - -

LPC4 65-160/0.75 0.75 1.0 8.3 - - - - - - - 8.1 8 7.9 7.8 7.4 7 6.6 6 4 - - - - - - - - - - -

LPC4 65-160/0.92 0.92 1.25 9.1 - - - - - - - 9 8.9 8.8 8.7 8.4 8.1 7.7 7.2 5.5 - - - - - - - - - - -

LPC4 65-200/1.1 1.1 1.5 12.6 - - - - - - - 12.3 12.2 12 11.5 10.8 10 9 8 5.8 - - - - - - - - - - -

LPC4 65-200/1.5 1.5 2 14.3 - - - - - - - 14.1 14.1 14 13.6 13 12.1 11.2 10.1 7.8 5 - - - - - - - - - -

LPC4 80-160/0.75 0.75 1 6.4 - - - - - - - - - - 6.3 6.1 6 5.8 5.6 4.9 4 3.2 2.2 - - - - - - - -

LPC4 80-160/0.92 0.92 1.25 7.4 - - - - - - - - - - 7.3 7.2 7.1 7 6.8 6.3 5.6 4.8 3.8 - - - - - - - -

LPC4 80-160/1.1 1.1 1.5 8.6 - - - - - - - - - - 8.5 8.5 8.4 8.3 8.2 7.9 7.3 6.7 5.9 5 - - - - - - -

LPC4 80-160/1.5 1.5 2 10.3 - - - - - - - - - - 10.2 10.1 10 9.9 9.8 9.5 9 8.4 7.5 6.5 - - - - - - -

LPC4 80-200/2.2 2.2 3 12.6 - - - - - - - - - - - - 12.5 12.4 12.3 12.1 11.7 11.1 10.4 9.6 8.5 - - - - - -

LPC4 80-200/3 3 4 15.4 - - - - - - - - - - - - 15.3 15.3 15.2 15 14.6 14.2 13.6 12.8 11.9 11 - - - - -

LPC4 100-160/1.5 1.5 2 8 - - - - - - - - - - - - - - - 7.7 7.5 7.2 7 6.7 6.4 6.1 5.8 5 - - -

LPC4 100-160/2.2 2.2 3 10 - - - - - - - - - - - - - - - 9.7 9.5 9.4 9.1 8.8 8.5 8.2 7.9 7.1 6 - -

LPC4 100-200/3 3 4 12.7 - - - - - - - - - - - - - - - 12 11.8 11.5 11.3 10.9 10.5 10 9.5 8.5 7 - -

LPC4 100-200/4 4 5.5 14.9 - - - - - - - - - - - - - - - 14.3 14.2 14 13.8 13.4 13.1 12.7 12.2 11 9 6.5 -

LPC4 100-250/5.5 5.5 7.5 20 - - - - - - - - - - - - - - - - - 19.2 18.9 18.5 18.1 17.7 17.2 16 14.5 12 -

LPC4 100-250/7.5 7.5 10 23.5 - - - - - - - - - - - - - - - - - 22.3 22.1 21.9 21.7 21.3 21 20 18.5 16.8 14.5

156



PERFORMANCE CHART LPCD4 series 4 POLES

R.P.M. ≈ 1450 min-1


TOTA

LHEA

D

157



PERFORMANCE TABLE LPCD4 40-50-65-80-100 series 4 POLES

Pump type

Motor Q=Capacitym3/h 0 2.4 3 4.5 6 7.5 9 10.5 12 13.5 15 18 21 24 27 30 36 42 48 54 60 66 72 78 90 105 120

l/min 0 40 50 75 100 125 150 175 200 225 250 300 350 400 450 500 600 700 800 900 1000 1100 1200 1300 1500 1750 2000kW HP H=Total head [m]

LPCD4 40-100/0.25 0,25 0.33 4 3.7 3.6 3.1 2.6 1.9 - - - - - - - - - - - - - - - - - - - - -

LPCD4 40-125/0.25 R 0,25 0.33 4.8 4.5 4.4 4.1 3.7 3 2.2 - - - - - - - - - - - - - - - - - - - -

LPCD4 40-125/0.25 0.25 0.33 6.3 - 6.2 6 5.7 5.2 4.5 3.9 2.8 - - - - - - - - - - - - - - - - - -

LPCD4 50-125/0.25 0.25 0.33 4.8 - - - 4.6 4.5 4.3 4.1 3.9 3.6 3.3 2.4 - - - - - - - - - - - - - - -

LPCD4 50-125/0.37 0.37 0.55 6.4 - - - 6.3 6.2 6.1 6 5.8 5.6 5.3 4.6 3 - - - - - - - - - - - - - -

LPCD4 50-160/0.55 0.55 0.75 9.2 - - - 8.8 8.6 8.4 8.1 7.7 7.3 6.8 5.8 4.4 - - - - - - - - - - - - - -

LPCD4 65-160/0.55 0.55 0.75 6.9 - - - - - 6.8 6.7 6.6 6.5 6.4 6.1 5.7 5.1 4.3 3.3 - - - - - - - - - - -

LPCD4 65-160/0.75 0.75 1.0 8.3 - - - - - - - 8.1 8 7.9 7.8 7.4 7 6.6 6 4 - - - - - - - - - -

LPCD4 65-160/0.92 0.92 1.25 9.1 - - - - - - - 9 8.9 8.8 8.7 8.4 8.1 7.7 7.2 5.5 - - - - - - - - - -

LPCD4 80-160/0.75 0.75 1 6.4 - - - - - - - - - - 6.3 6.1 6 5.8 5.6 4.9 4 3.2 2.2 - - - - - - -

LPCD4 80-160/0.92 0.92 1.25 7.4 - - - - - - - - - - 7.3 7.2 7.1 7 6.8 6.3 5.6 4.8 3.8 - - - - - - -

LPCD4 80-160/1.1 1.1 1.5 8.6 - - - - - - - - - - 8.5 8.5 8.4 8.3 8.2 7.9 7.3 6.7 5.9 5 - - - - - -

LPCD4 80-160/1.5 1.5 2 10.3 - - - - - - - - - - 10.2 10.1 10 9.9 9.8 9.5 9 8.4 7.5 6.5 - - - - - -

LPCD4 100-200/1.5 1.5 2 8.6 - - - - - - - - - - - - - - 8.1 7.8 7.4 7 6.5 5.9 5.2 4.5 3.8 - - -

LPCD4 100-200/2.2 2.2 3 10.6 - - - - - - - - - - - - - - 10.2 10 9.7 9.3 9 8.6 8.2 7.7 7.2 6 - -

LPCD4 100-200/3 3 4 12.7 - - - - - - - - - - - - - - - 12 11.8 11.5 11.3 10.9 10.5 10 9.5 8.5 7 -

LPCD4 100-200/4 4 5.5 14.9 - - - - - - - - - - - - - - - 14.3 14.2 14 13.8 13.4 13.1 12.7 12.2 11 9 6.5

158



LPC 40-50 series DIMENSIONS 2 POLES

DIMENSIONAL TABLE

Dimensions [mm] WeightPump type

DTA/M DNA/M n f P K D H H1 H2 H3 H4 R F A B C[kg]

LPC 40-100/0.55 G1 1/2 40PN6 4 14 80 100 130 260 140 120 107 77 90 16 184 445 335 16LPC 40-100/0.75 G1 1/2 40PN6 4 14 80 100 130 260 140 120 107 77 90 16 184 445 335 16LPC 40-125/0.75 G1 1/2 40PN10 4 18 88 110 150 300 160 140 107 93 100 20 200 425 325 24LPC 40-125/1.1 G1 1/2 40PN10 4 18 88 110 150 300 160 140 118 93 100 20 211 445 345 25LPC 40-125/1.5 G1 1/2 40PN10 4 18 88 110 150 300 160 140 118 93 100 20 211 445 345 26LPC 40-160/2.2 G1 1/2 40PN10 4 18 88 110 150 320 170 150 118 108 100 20 226 445 345 30LPC 40-160/3.0 G1 1/2 40PN10 4 18 88 110 150 320 170 150 149 108 100 20 257 485 385 35LPC 40-160/4.0 G1 1/2 40PN10 4 18 88 110 150 320 170 150 149 108 100 20 257 485 385 37LPC 40-200/4.0 G1 1/2 40PN10 4 18 88 110 150 380 200 180 159 127 100 20 286 525 425 50LPC 40-200/5.5 G1 1/2 40PN10 4 18 88 110 150 380 200 180 159 127 100 20 286 535 435 55LPC 40-200/6.3 G1 1/2 40PN10 4 18 88 110 150 380 200 180 159 127 100 20 286 535 435 56LPC 50-125/1.5 G2 50PN10 4 18 102 125 165 320 180 140 118 103 110 22 221 455 345 27LPC 50-125/2.2 G2 50PN10 4 18 102 125 165 320 180 140 118 103 110 22 221 455 345 28LPC 50-125/3.0 G2 50PN10 4 18 102 125 165 320 180 140 149 103 110 22 252 495 385 32LPC 50-160/3.0 G2 50PN10 4 18 102 125 165 340 180 160 149 113 110 22 262 495 385 32LPC 50-160/4.0 G2 50PN10 4 18 102 125 165 340 180 160 159 113 110 22 272 535 425 42LPC 50-200/5.5 G2 50PN10 4 18 102 125 165 400 220 180 159 131 110 22 290 545 435 56LPC 50-200/6.3 G2 50PN10 4 18 102 125 165 400 220 180 159 131 110 22 290 545 435 57LPC 50-200/7.5 G2 50PN10 4 18 102 125 165 400 220 180 184 131 110 22 315 650 540 64

159



LPC 65-80-100 series DIMENSIONS 2 POLES

DIMENSIONAL TABLE



LPC 65-125/2.2 G2 1/2 65PN10 4 18 122 145 185 360 205 155 118 108 140 22 226 485 345 32LPC 65-125/3.0 G2 1/2 65PN10 4 18 122 145 185 360 205 155 149 108 140 22 257 525 385 39LPC 65-125/4.0 G2 1/2 65PN10 4 18 122 145 185 360 205 155 159 108 140 22 267 565 425 43LPC 65-160/5.5 G2 1/2 65PN10 4 18 122 145 185 400 220 180 159 122 140 22 281 575 435 54LPC 65-160/7.5 G2 1/2 65PN10 4 18 122 145 185 400 220 180 184 122 140 22 306 680 540 61LPC 65-200/10 G2 1/2 65PN10 4 18 122 145 185 440 240 200 184 136 140 22 320 680 540 70LPC 65-200/12.5 G2 1/2 65PN10 4 18 122 145 185 440 240 200 184 136 140 22 320 680 540 77LPC 80-160/10 G3 80PN10 4 18 138 160 200 440 240 200 184 131 160 24 315 700 540 72LPC 80-160/12.5 G3 80PN10 4 18 138 160 200 440 240 200 184 131 160 24 315 700 540 79LPC 80-160/15 G3 80PN10 4 18 138 160 200 440 240 200 184 131 160 24 315 700 540 85LPC 80-200/15 G3 80PN10 4 18 138 160 200 500 275 225 184 146 160 24 330 700 540 91LPC 80-200/18.5 G3 80PN10 4 18 138 160 200 500 275 225 229 146 160 24 375 860 700 124LPC 80-200/22 G3 80PN10 4 18 138 160 200 500 275 225 229 146 160 24 375 860 700 142LPC 100-160/10 G4 100PN10 8 18 158 180 220 525 300 225 184 136 190 26 320 730 540 76LPC 100-160/12.5 G4 100PN10 8 18 158 180 220 525 300 225 184 136 190 26 320 730 540 84LPC 100-160/15 G4 100PN10 8 18 158 180 220 525 300 225 184 136 190 26 320 730 540 91LPC 100-200/18.5 G4 100PN10 8 18 158 180 220 550 300 250 230 156 190 26 386 890 710 135LPC 100-200/22 G4 100PN10 8 18 158 180 220 550 300 250 230 156 190 26 386 890 710 153LPC 100-200/30 G4 100PN10 8 18 158 180 220 550 300 250 257 156 190 26 413 995 805 195LPC 100-200/37 G4 100PN10 8 18 158 180 220 550 300 250 257 156 190 26 413 995 805 213LPC 100-250/37 G4 100PN10 8 18 158 180 220 600 320 280 257 176 190 26 433 995 805 220

160



LPCD 40-50-65-80-100 series DIMENSIONS 2 POLES

DIMENSIONAL TABLE

Dimensions [mm]Pump type Weight

DTA/M DNA/M n f P K D H H1 H2 H3 H4 M R F A B C[kg]

LPCD 40-125/0.55 G1 1/2 40PN10 4 18 88 110 150 340 130 210 197 200 100 100 20 397 425 325 50LPCD 40-125/0.75 G1 1/2 40PN10 4 18 88 110 150 340 130 210 197 200 100 100 20 397 425 325 50LPCD 40-125/1.1 G1 1/2 40PN10 4 18 88 110 150 340 130 210 197 200 100 100 20 397 445 345 52LPCD 40-125/1.5 G1 1/2 40PN10 4 18 88 110 150 340 130 210 197 200 100 100 20 397 445 345 54LPCD 50-125/1.5 G2 50PN10 4 18 102 125 165 365 145 220 210 217 105 110 22 427 455 345 56LPCD 50-125/2.2 G2 50PN10 4 18 102 125 165 365 145 220 210 217 105 110 22 427 455 345 58LPCD 50-125/3.0 G2 50PN10 4 18 102 125 165 365 145 220 210 217 105 110 22 427 495 385 66LPCD 50-160/3.0 G2 50PN10 4 18 102 125 165 410 170 240 235 245 120 110 22 480 495 385 72LPCD 50-160/4.0 G2 50PN10 4 18 102 125 165 410 170 240 235 245 120 110 22 480 535 425 86LPCD 65-160/3.0 G2 1/2 65PN10 4 18 122 145 185 450 180 270 268 275 140 130 22 543 515 385 81LPCD 65-160/4.0 G2 1/2 65PN10 4 18 122 145 185 450 180 270 268 275 140 130 22 543 555 425 101LPCD 65-160/5.5 G2 1/2 65PN10 4 18 122 145 185 450 180 270 268 275 140 130 22 543 565 435 125LPCD 65-160/7.5 G2 1/2 65PN10 4 18 122 145 185 450 180 270 268 275 140 130 22 543 565 435 132LPCD 80-160/7.5 G3 80PN10 4 18 138 160 200 510 205 305 270 280 135 130 24 550 565 435 137LPCD 80-160/10 G3 80PN10 4 18 138 160 200 510 205 305 270 280 135 150 24 550 690 540 141LPCD 80-160/12.5 G3 80PN10 4 18 138 160 200 510 205 305 270 280 135 150 24 550 690 540 162LPCD 80-160/15 G3 80PN10 4 18 138 160 200 510 205 305 270 280 135 150 24 550 690 540 175LPCD 100-200/12.5 G4 100PN10 8 18 158 180 220 630 240 390 345 325 165 180 26 670 720 540 162LPCD 100-200/15 G4 100PN10 8 18 158 180 220 630 240 390 345 325 165 180 26 670 720 540 162

161



LPC4 40-50-65-80-100 series DIMENSIONS 4 POLES

DIMENSIONAL TABLEDimensions [mm]

WeightPump type


LPC4 40-100/0.25 G1 1/2 40PN6 4 14 80 100 130 260 140 120 107 77 90 16 184 445 355 16 LPC4-40-125/0.25 R G1 1/2 40PN10 4 18 88 110 150 300 160 140 107 93 100 20 200 425 325 20LPC4 40-125/0.25 G1 1/2 40PN10 4 18 88 110 150 300 160 140 107 93 100 20 200 425 325 20LPC4 40-160/0.37 G1 1/2 40PN10 4 18 88 110 150 320 170 150 107 108 100 20 215 425 325 23LPC4 40-200/0.75 G1 1/2 40PN10 4 18 88 110 150 380 200 180 118 127 100 20 245 445 345 30LPC4 40-200/0.92 G1 1/2 40PN10 4 18 88 110 150 380 200 180 118 127 100 20 245 445 345 31LPC4 50-125/0.25 G2 50PN10 4 18 102 125 165 320 180 140 107 103 110 22 210 435 325 21LPC4 50-125/0.37 G2 50PN10 4 18 102 125 165 320 180 140 107 103 110 22 210 435 325 22LPC4 50-160/0.55 G2 50PN10 4 18 102 125 165 340 180 160 107 113 110 22 220 435 325 25LPC4 50-200/1.1 R G2 50PN10 4 18 102 125 165 400 220 180 149 131 110 22 280 495 385 36LPC4 50-200/1.1 G2 50PN10 4 18 102 125 165 400 220 180 149 131 110 22 280 495 385 36LPC4 65-125/0.37 G2 1/2 65PN10 4 18 122 145 185 360 205 155 107 108 140 22 215 465 325 25LPC4 65-125/0.55 G2 1/2 65PN10 4 18 122 145 185 360 205 155 107 108 140 22 215 465 325 26LPC4 65-160/0.75 G2 1/2 65PN10 4 18 122 145 185 400 220 180 118 122 140 22 240 485 345 32LPC4 65-160/0.92 G2 1/2 65PN10 4 18 122 145 185 400 220 180 118 122 140 22 240 485 345 33LPC4 65-200/1.1 G2 1/2 65PN10 4 18 122 145 185 440 240 200 149 136 140 22 285 525 385 38LPC4 65-200/1.5 G2 1/2 65PN10 4 18 122 145 185 440 240 200 149 136 140 22 285 525 385 40LPC4 80-160/0.75 G3 80PN10 4 18 138 160 200 440 240 200 118 131 160 24 249 505 345 36LPC4 80-160/0.92 G3 80PN10 4 18 138 160 200 440 240 200 118 131 160 24 249 505 345 37LPC4 80-160/1.1 G3 80PN10 4 18 138 160 200 440 240 200 149 131 160 24 280 545 385 38LPC4 80-160/1.5 G3 80PN10 4 18 138 160 200 440 240 200 149 131 160 24 280 545 385 40LPC4 80-200/2.2 G3 80PN10 4 18 138 160 200 500 275 225 159 146 160 24 305 585 425 51LPC4 80-200/3.0 G3 80PN10 4 18 138 160 200 500 275 225 159 146 160 24 305 585 425 57LPC4 100-160/1.5 G4 100PN10 8 18 158 180 220 525 300 225 149 136 190 26 285 575 385 45LPC4 100-160/2.2 G4 100PN10 8 18 158 180 220 525 300 225 159 136 190 26 295 615 425 50LPC4 100-200/3.0 G4 100PN10 8 18 158 180 220 550 300 250 159 156 190 26 315 615 425 66LPC4 100-200/4.0 G4 100PN10 8 18 158 180 220 550 300 250 159 156 190 26 315 625 435 73LPC4 100-250/5.5 G4 100PN10 8 18 158 180 220 600 320 280 184 176 190 26 360 730 540 96LPC4 100-250/7.5 G4 100PN10 8 18 158 180 220 600 320 280 184 176 190 26 360 730 540 106

162



LPCD4 40-50-65-80-100 series DIMENSIONS 4 POLES

DIMENSIONAL TABLE


DTA/M DNA/M n f P K D H H1 H2 H3 H4 M R F A B C[kg]

LPCD4 40-100/0.25 G1 1/2 40PN10 4 18 88 110 150 340 130 210 197 200 100 100 20 397 425 325 41LPCD4 40-125/0.25R G1 1/2 40PN10 4 18 88 110 150 340 130 210 197 200 100 100 20 397 425 325 41LPCD4 40-125/0.25 G1 1/2 40PN10 4 18 88 110 150 340 130 210 197 200 100 100 20 397 425 325 41LPCD4 50-125/0.25 G2 50PN10 4 18 102 125 165 365 145 220 210 217 105 110 22 427 435 325 44LPCD4 50-125/0.37 G2 50PN10 4 18 102 125 165 365 145 220 210 217 105 110 22 427 435 325 46LPCD4 50-160/0.55 G2 50PN10 4 18 102 125 165 410 170 240 235 245 120 110 22 480 435 325 52LPCD4 65-160/0.55 G2 1/2 65PN10 4 18 122 145 185 450 180 270 268 275 140 130 22 543 475 345 65LPCD4 65-160/0.75 G2 1/2 65PN10 4 18 122 145 185 450 180 270 268 275 140 130 22 543 475 345 65LPCD4 65-160/0.92 G2 1/2 65PN10 4 18 122 145 185 450 180 270 268 275 140 130 22 543 475 345 67LPCD4 80-160/0.75 G3 80PN10 4 18 138 160 200 510 205 305 270 280 135 150 24 550 485 335 72LPCD4 80-160/0.92 G3 80PN10 4 18 138 160 200 510 205 305 270 280 135 150 24 550 485 335 74LPCD4 80-160/1.1 G3 80PN10 4 18 138 160 200 510 205 305 270 280 135 150 24 550 535 385 79LPCD4 80-160/1.5 G3 80PN10 4 18 138 160 200 510 205 305 270 280 135 150 24 550 535 385 83LPCD4 100-200/1.5 G4 100PN10 8 18 158 180 220 630 240 390 345 325 165 180 26 670 535 355 110LPCD4 100-200/2.2 G4 100PN10 8 18 158 180 220 630 240 390 345 325 165 180 26 670 605 425 130LPCD4 100-200/3.0 G4 100PN10 8 18 158 180 220 630 240 390 345 325 165 180 26 670 605 425 138LPCD4 100-200/4.0 G4 100PN10 8 18 158 180 220 630 240 390 345 325 165 180 26 670 615 435 150

163

MRTHREE SPEED CIRCULATOR

SPECIFICATIONS• Maximum working pressure: 10 bar • Maximum liquid temperature: 110°C • Maximum ambient temperature: 55°C• Maximum circulator surface temperature: 125°C

MATERIALS• Pump casing in cast iron • Shaft in chrome steel • Impeller in tecnopolymer• Can in stainless steel

TECHNICAL DATA• 3 speed motor with regulator on the terminal box • Insulation class H• 1~230V 50HzWith water at 90°C a mimimum inlet pressure of 1,5 mt.must be guaranteed in order to avoid cavitation troubles.

Available in the following versions:

- mm.130 with 1” and 1”1/2 pipe male connection with 2 gaskets- mm.180 with 1”1/2 and 2” pipe male connection with 2 gaskets- mm.120 flanged, with 2 gaskets and bolts

Small 3 speed circulators for heating systems.


MR 43 MR 53 MR 63

164

ETHERMAFOUR SPEED CIRCULATORS

SPECIFICATIONS• Maximum working pressure: 10 bar • Maximum liquid temperature: -15°C ÷ +120°C

MATERIALS• Pump casing in cast iron or bronze • Shaft in chrome steel • Impeller in tecnopolymer or bronze• Can in stainless steel

TECHNICAL DATA• 3 speed motor with regulator on the terminal box • Insulation class F, IP 44• 1~230V 50Hz, 3~ 400V±6% -10%, 50 HzWith water at 90°C a mimimum inlet pressure of 1,5 m mustbe guaranteed in order to avoid cavitation troubles.

Available in the following versions:

- mm.130 with 1” and 1”1/4 pipe male connection with 2 gaskets- mm.180 with 1”1/4 and 2” pipe male connection with 2 gaskets- mm.120 flanged, with 2 gaskets and bolts

In-line pumps with motor mounted directly onto the pump body and provided with multi-speed reg-ulator giving greater flexibility. It allows the pump to be more accurately matched to the system’shydraulic requirements and reduces flows velocity noise and also reduces power consuption.Suitable for domestic and industrial heating systems and secondary hot water applications.

165

ETHERMACIRCOLATORI A QUATTRO VELOCITÀ

PERFORMANCE CHART at 2800 min -1 (according to ISO 9906 Annex A)

PERFORMANCE CHART at 1400 min -1 (according to ISO 9906 Annex A)

8-120-2 (D)

5-95-2 (D)

4-95-2 (D)5-88-2 (D)4-75-2 (D)

4-60-2 (D)

3-100-2 (D)

2/3-72-2 (D)

2-70-2/3-70-2 (D)2-65-2/3-65-2 (D)

8-100-2 (D)

8-95-2 (D)

5-120-2

6-110-2 (D)

6-95-2 (D)

166

ETHERMA EELECTRONIC CIRCULATORS

SPECIFICATIONS• Maximum working pressure: 10 bar • Maximum liquid temperature: +15°C ÷ +120°C • Maximum viscosity: 10 mm2/s (10 cst)

MATERIALS• Pump casing in cast iron • Shaft in chrome steel • Impeller in tecnopolymer• Can in stainless steel

TECHNICAL DATA• Insulation class F, IP 44• 1~230V, 3~400V (±10%) 50HzElectronic overload protection incorporated.(single and twin versions available)

In-line pumps with motor mounted directly onto the pump body and provided with integrated elec-tronic speed control giving greater flexibility. It allows the pump to be more accurately matched to thesystem’s hydraulic requirements and reduces flows velocity noise and also reduces power consup-tion. Suitable for domestic and industrial heating systems.

167

BEST BOX-MINIRIGHT-SANIRELEVAUTOMATIC LIFTING STATIONS

SANIRELEV 22• Predisposed to two pumps type DW or DW VOX • Free passage: 50 mm • Outlet diam. DN50/DN63 • Tank capacity: 540 l • Weight: 30 kg

Sanirelev 22 MPC: single-phase, foot bracket, panel and float switch Sanirelev 22 TPC: three-phase, foot bracket, panel and float switch

SANIRELEV 11• Predisposed to pump type DW or DW VOX • Free passage: 50 mm • Outlet diam. DN50/DN63 • Tank capacity: 360 l • Weight: 21,5 kg

Sanirelev 11 MSA: single-phase, support and float switchSanirelev 11 MPA: single-phase, foot bracket and float switchSanirelev 11 MSC: single-phase, support, panel and float switchSanirelev 11 MPC: single-phase, foot bracket, panel and float switch Sanirelev 11 TSC: three-phase, support, panel and float switchSanirelev 11 TPC: three-phase, foot bracket, panel and float switch

725 mm

1035

mm

810 mm

810 mm725 mm

835

mm

BEST BOX (Garage version)• Predisposed to pump type Best one Vox • Free passage: 20 mm • Outlet diam. 1”1/4

• Tank capacity: 30 l • Weight : 125 kg

BEST BOX (Shower and Washbasin version)• Predisposed to pump type Best one • Free passage: 10 mm • Outlet diam. 1”1/4

• Tank capacity: 30 l • Weight without pump: 8,5 kg

MINI RIGHT • Predisposed to pump type Right series • Free passage: 35 mm • Outlet diam. 50 mm• Tank capacity: 100 l • Weight: 26 kg

510 mm

470

mm

375 mm

270 mm

405 mm

360

mm

510 mm

730

mm

430 mm

635

mm

168

GP-GP INOX

Automatic booster units constructed from one single-phasepump, pressure vessel.

Fitted with non return valvePressure SwitchPressure gauge

• Ready for installation by a suitably qualified tradesman.• Package Sewage Stations• Standard units available with inlet & outlets locations to

suit the applications - installation parameters.

Booster can be built with all Ebara single-phase pumps ofthe following series:

• CD-2CD• CDX-2CDX• JES-JE• JESX-JEX• COMPACT• AGA-AGC-AGE-AGF• CMA-CMB-CDA

PERFORMANCE CURVES PERFORMANCE CURVES

BOOSTER UNITS WITH ONE PUMP

Note: tanks optional

170

2GP-3GP-GPEPRESSURE SETS

For any information, please contact our sales dept.

PERFORMANCE CHART

For complete technical and performance datas of the complete range: request the wide “Pressure Boostersets” catalogue

Complete automatic pressure sets provided of several pump models, adapted for centrifugal, multistage horizontal,vertical centrifugal pumps.

171

CONTROL BOXES

Pump type HP kW Currentmin. A max A

2EP 0,37T UA 0,5+0,5 0,37+0,37 0,9 1,32EP 0,55T UA 0,75+0,75 0,55+0,55 1,4 1,92EP 0,75T UA 1+1 0,75+0,75 2 32EP 1,1T UA 1,5+1,5 1,1+1,1 2 32EP 1,5T UA 2+2 1,5+1,5 3 3,92EP 2,2T UA 3+3 2,2+2,2 4,5 5,82EP 3,7T UA 5+5 3,7+3,7 6 82EP 5,5T UA 7,5+7,5 5,5+5,5 9 13,52EP 7,5T UA 9,5+9,5 7+7 14 182EP 11T UA 15+15 11+11 17 222EP 13,5T UA 18,3+18,3 13,5+13,5 20 29

Pump type HP kW Amperometricprotectionregulation

2EP 0,25M UA 0,34+0,34 0,25+0,25 32EP 0,37M UA 0,5+0,5 0,37+0,37 42EP 0,55M UA 0,75+0,75 0,55+0,55 62EP 0,75M UA 1+1 0,75+0,75 82EP 1,1M UA 1,5+1,5 1,1+1,1 102EP 1,5M UA 2+2 1,5+1,5 162EP 2,2M UA 3+3 2,2+2,2 18


1EP 0,37-2,2 kWT UA 0,5-3 0,37-2,2 2 - 8 A1EP 3-7,5 kWT UA 4-15 3-7,5 5 - 14 A1EP 9,2-11 kWT UA 12,5-15 9,2-11 18 - 22 A


1 EP 0,37-2,2 kW UAM 0,5-3 0,37-2,2 0 - 18 A

Protection IP 55Control box for single-phase surface electropumps, submersibleone and, using a capacitor, borehole electropumps.Auxiliary circuits at low voltage, possibility to check the level byprobes, float switches or pressure switch. Amperometric protectionregulation. The UA version is supplied with remote alarm outlet.

Single-phase 230 V - 50 Hz

TYPE 1EP 0,37-2,2 kW M (CE)

Protection IP 55Control boxes for three-phase surface electropumps, submersibleone and borehole ones.Self-starting. Auxiliary circuits at low voltage, possibility to checkthe level by probes, float switches or pressure switch.Amperometric protection regulation. Soon it will be available withremote alarm outlet.

Three-phase 400 V - 50 Hz

TYPE 1EP TUA (CE)

Protection IP 55Control boxes with self-starting for two three-phase surface electropumps orsubmersible ones. Auxiliary circuits at low voltage, possibility to check the levelby the float switches or by the pressure switch.As standard version, they are with inverter to start the motors and with remotealarm outlet.


TYPE 2 EP TUA (CE)

Protection IP 55Control boxes for two single-phase surface electropumps or sub-mersible ones.Auxiliary circuits at low voltage, possibility to check the level byfloat switches or pressure switch. As standard version, they arewith inverter to start the motors and with remote alarm outlet.

Single-phase 230 V - 50 Hz

TYPE 2EP MUA (CE)


2EP 7,5 SD UA 10 7,5 15 182EP 9,25 SD UA 12,5 9,2 17 202EP 11 SD UA 15 11 18 232EP 15 SD UA 20 15 24 352EP 18,5 SD UA 25 18,5 27 402EP 22 SD UA 30 22 35 52

Protection IP 55Control boxes with star-delta starting tor two three-phase surface electropumpsor submersible ones.Auxiliary circuits at low voltage, possibility to check the level by float switches orpressure switch.As standard version they are with inverter to start the motors and with remotealarm outlet.


TYPE 2 EP SD UA


1 EP 7,5 SD UA 10 7,5 15 181 EP 11 SD UA 15 10 18 231 EP 15 SD UA 20 15 24 35

1 EP 18,5 SD UA 25 18,5 35 451 EP 22 SD UA 30 22 35 521 EP 30 SD UA 40 30 49 661 EP 37 SD UA 50 37 75 85

Protection IP 55Control box for three-phase surface electropumps, submersibleone and borehole electropumps.Star-delta starting, auxiliary circuits at low voltage, possibility tocheck the level by pressure switch (optional by probes). Soon itwill be available with remote alarm outlet.


TYPE 1EP SD

172

Load losses (Pc) in meters (column of water)Flow rate (V m/s).

LOAD LOSSES TABLE

Capacity Internal diameter (mm)

Discharge diameter

Suction diameter

EBARA PUMPS EUROPE S.p.A.Via Pacinotti, 3236040 BRENDOLA (VICENZA), ItalyPhone: +39 0444 706811 - Fax: +39 0444 706950Plants: Cles, [email protected]

EBARA PUMPS UK LIMITEDUnit 7 - Zodiac ParkHigh Road - CowleyUxbridgeMiddlesex UB8 2GUPhone: 01895 439027Fax: 01895 439028

EBARA ESPAÑA BOMBAS S.A.Poligono Las Arenas, C/Alameda, 128320 PINTO (MADRID), SpainPhone: 916.923.630Fax: 916.923.891

EBARA FRANCEZ.I. des Amandiers 39 Rue des Entrepreneurs78420 CARRIERES-SUR-SEINE, FrancePhone: (1) 30865480Fax: (1) 39131971

EBARA PUMPENPhilipp-Reis - Str. 1563128 DIETZENBACH, GermanyPhone: 6074/82790Fax: 6074/827942

EBARA Pompy Polska Sp. z o.o.ul. Minska 6303-828 Warszawa, Polandtel.: +48 22 3308118Fax.: +48 22 3308119

Italian Branches EBARA BARIVia Po, 370026 MODUGNO (BA)Tel. 080/5320531 - Fax: 080/5320478

EBARA CAGLIARIVia del Fangario, 29 - 09122 CAGLIARITel. 070/274281 - Fax: 070/253643

EBARA FIRENZEVia del Pesco, 15 Loc. La Querce59100 PRATOTel. 0574/514175 - Fax: 0574/700126

EBARA MILANOVia Magenta, 77 - 20017 RHO (MI)Tel. 02/93507358/59 - Fax: 02/93507361

EBARA PALERMOVia Don L. Sturzo, 181/183ZONA INDUSTRIALE - 90044 CARINI (PA)Tel. 091/8680840 - Fax: 091/8669790

EBARA PESCARAVia Aterno, 31 - Z. Ind.le e Com.le66100 SAMBUCETO - S. GIOVANNI TEATINO (CH)Tel. 085/4465145 - Fax: 085/4465171

EBARA ROMAVia E. Ferrari, 10500043 CIAMPINO (RM)Tel. 06/79341516 - Fax: 06/79341628

Agenzie CATANZAROEUROSERVICE S.N.C.Tel. 0961 769015 - Fax 0961 61317

NAPOLIDIVIERRETel. 081 2583654 - Fax 081 2508617

PADOVANEGRISOLO GIANNITel. 049 9900296 - Fax 049 9903539

PORDENONEFOR-TECTel. 0434 957878 - Fax 0434 560343

GENOVANICOLOSITel. 010 322128 - Fax 010 322128

Principal EBARA Group Companies in Europe

Date post:	15-Jan-2016
Category:	Documents
Upload:	jumaditn
View:	101 times
Download:	2 times

Ebara Pump

Documents