--- --- --- -- EC- Type Examination Certificate --- FORCE -- -- -- -- -- -- Marine Equipment - Module B Certification -- Certificate No. DK-0200-MarED-OOl Rev. 2 Issued by FORCE Certification A/S, Denmark under EC-notification number 0200 In accordance with Technical Regulation on Marine Equipment No. 1281 of 14 November 2013 from the Danish Maritime Authority which in Denmark implements the COUNCIL DIRECTlVE 96j98jEC of 20 th December 1996 on marine equipment (changed by the Com mission Directive 98j85jEC of 11 th November 1998, Commission Directive 2001j53jEC of 10 th July 2001, Commission Directive 2002j75jEC of 2 nd September 2002, European Parliament and Council Directive 2002j84jEC of 5 th November 2002, Commission Directive 2008j67jEC of 30 th June 2008 and Com mission Directive 20t2/32jEU of 25 October 2012, 8 th Amendment) this certiAcate is issued to: Applicant and manufacturer: Thanner A/S Randersvej 10 DK-6700 Esbjerg Denmark Identification of Marine Equipment: Annex A.1 Item: A.1/1.16 Float-free arrangements for life rafts Produet Type: Hydrostatic Release Units, HRU Produet Designations : DK84.1, DK84.1M, DK84.1FN and DK84 RN2 according assembly drawings 10- 075 mod. L dated 12.08.2013 and 10-107 mod. B dated 12.08.2013, 10-096 mod. B dated 13.08.2013, 12-005 mod. Adated 11.08.2013 and 13-001.2 mod. H dated 13.08.2013 respectively Release water depts.: Within 4 meters for DK84.1, DK84.1M, DK84.1FN and within 6 meters for DK84 RN2 Specified Standard: IMO Res. MSC 81(70) The examined samples are found to fulfil the requirements in the International Testing Standard IMO Res. MSC 81(70) and applicable regulations of SO LAS 74, as amended, the relevant requirements being specified in ANNEX A.l, Section 1, and item A1/1.16 as well as in ANNEX B, Module B, of the DIRECTIVE. Any significant changes to design or manufacture, or amendments to the Directive or applicable standards may render th is certificate inya I id. This EC-Type Examination Certificate replaces the previously issued Certificate No. DK-0200-MarED-001, Rev. l. Date of issue: 2013-11-26 Date of expire: 2018-11-26 Niels Ovesen Certification Manager @ The Mark af Conformity may only be affixed to the above type approved equipment and a o Manufacturer's Declaratlan af Canformlty may only be Issued when the praductianjpraduct assessment module (D, E ar Fl, ANNEX B of the Dlrective is fully complled with and '... ' . \ . controlled by a written Inspection agreement with a notifled body. 0200/YY Last twa digits of year mark affixed FORCE Certlficatlon A/S Park Alle 345' 2605 Brøndby' Denmark . Tel +4543267177' Fax +4543267011' [email protected]· www.force-cert.dk
Certificate No. DK-0200-MarED-OOl Rev. 2 Issued by FORCE Certification A/S, Denmark under EC-notification number 0200
In accordance with Technical Regulation on Marine Equipment No. 1281 of 14 November 2013 from the Danish Maritime Authority which in Denmark implements the COUNCIL DIRECTlVE 96j98jEC of 20th December 1996 on marine equipment (changed by the Com mission Directive 98j85jEC of 11 th November 1998, Commission Directive 2001j53jEC of 10th July 2001, Commission Directive 2002j75jEC of 2nd September 2002, European Parliament and Council Directive 2002j84jEC of 5th November 2002, Commission Directive 2008j67jEC of 30th June 2008 and Commission Directive 20t2/32jEU of 25 October 2012, 8th Amendment) this certiAcate is issued to:
Applicant and manufacturer: Thanner A/S Randersvej 10 DK-6700 Esbjerg Denmark
Identification of Marine Equipment: Annex A.1 Item: A.1/1.16 Float-free arrangements for life rafts
Produet Type: Hydrostatic Release Units, HRU
Produet Designations : DK84.1, DK84.1M, DK84.1FN and DK84 RN2 according assembly drawings 10075 mod. L dated 12.08.2013 and 10-107 mod. B dated 12.08.2013, 10-096 mod. B dated 13.08.2013, 12-005 mod. Adated 11.08.2013 and 13-001.2 mod. H dated 13.08.2013 respectively
Release water depts.: Within 4 meters for DK84.1, DK84.1M, DK84.1FN and within 6 meters for DK84 RN2
Specified Standard: IMO Res. MSC 81(70)
The examined samples are found to fulfil the requirements in the International Testing Standard IMO Res. MSC 81(70) and applicable regulations of SO LAS 74, as amended, the relevant requirements being specified in ANNEX A.l, Section 1, and item A1/1.16 as well as in ANNEX B, Module B, of the DIRECTIVE.
Any significant changes to design or manufacture, or amendments to the Directive or applicable standards may render th is certificate inya Iid.
This EC-Type Examination Certificate replaces the previously issued Certificate No. DK-0200-MarED-001, Rev. l.
Date of issue: 2013-11-26 Date of expire: 2018-11-26
Niels Ovesen Certification Manager
@ The Mark af Conformity may only be affixed to the above type approved equipment and a o Manufacturer's Declaratlan af Canformlty may only be Issued when the praductianjpraduct assessment module (D, E ar Fl, ANNEX B of the Dlrective is fully complled with and'... ' .
\ . controlled by a written Inspection agreement with a notifled body.
0200/YY Last twa digits of year mark affixed
FORCE Certlficatlon A/S Park Alle 345' 2605 Brøndby' Denmark . Tel +4543267177' Fax +4543267011' [email protected]· www.force-cert.dk
-------------Enclosure to Certificate No. DK-0200-MarED-OOl Rev. 2 -EC-Type Examination Certificate FORCE -Marine Equipment - Module B ---Certification -----DK84.1 series
Page 1 af 5
Common information
Issued to:
for marine equipment: Type:
Manufactured by:
Design:
Photos:
Thanner A/S Randersvej 10 DK 6700 Esbjerg
A.1/1.16 Float-free arrangements for life rafts, Hydrostatic Release Units, HRU
Hydrostatic Release Units, HRU
Thanner A/S
DK84.1 according to measure drawings 10-077 mod. edated 13.08.2013 and 10-090 mod. Adated 12.08.2013 and assembly drawings 10-075 mod. L dated 12.08.2013 and 10-107 mod. B dated 12.08.2013.
DK84.1M according to measure drawing 10-110 mod. Adated 09.06.2008 and assembly drawing 10-096 mod. B dated 13.08.2013.
DK84.1FN according to measure drawing 12-006 mod. Adated 13.08.2013 and assembly drawing 12-005 mod. Adated 11.08.2013.
DK84 RN2 according to measure drawing 13-300 mod. Ddated 13.08.2013 and assembly drawing 13-001.2 mod. H dated 13.08.2013.
Thanner DK84.1
------Enclosure to Certificate No. DK-0200-MarED-OOl Rev. 2 ---EC-Type Examination Certificate FORCE ====Marine Equipment - Module B -==-ECertification -:=-? DK84.1 series
Page 2 of 5
Photos: Thanner DK84.1M
Enclosure to Certificate No. DK-0200-MarED-OOl Rev. 2 EC-Type Examination Certificate FORCE Marine Equipment - Module B CertificationDK84.1 series
Page 3 af 5
Phatas: Thanner DK84.1FN
----Enclosure to Certificate No. DK-0200-MarED-OOl Rev. 2 ---EC-Type Examination Certificate FORCE ==:=Marine Equipment - Module B ====
Certification ~F DK84.1 series
Page 4 of 5
Photos: Thanner DK84 RN2
--------------
Enclosure to Certificate No. DK-0200-MarED-OOl Rev. 2 ---EC-Type Examination Certificate FORCE ---Marine Equipment - Module B ---�Certification ---DK84.1 series
Page 5 of 5
Marking:� Wheel mark according to drawing 14-051 mod. C dated 14.08.2013 Production date label according to drawing 10-001 dated 14.08.2013 Label for DK84 RN2 according to drawing 13-032 dated 12.11.1993 Deep stampings according to the above mentioned measure drawings
Quality system B+D modules: Type examination Test House File Number Testing Date reports:
TI 2984556/35 Salt spray exposure 1984-11-13
Dantest A 27563 Type testmg 1985-03-28
Danish Maritime Authority 56111293-1 Type testing 1991-03-14
FORCE Certlficatlon 113-21165.a Certificate renewal report 2013-08-21
Quality audits:� FORCE Institute, year 2000 and 2001, FORCE Technology, year 2002 through 2007 FORCE Certification, year 2008 through 2013
Submitted� Installation manuals 10-086 and 10-105 for DK84.1 documentation:� Installation manual 10-117A for DK84.1M
QA manuals QA 2020 and QA 0122 for DK84.1 QA manuals QA 2037 and QA 0122 for DK84.1M QA manuals QA 2016 and QA 0122 for DK84.1FN QA manuals QA 2004 and QA 2093 for DK84 RN2 Above mentioned assembly drawings Complete set of drawings List with subcontractors Above mentioned type test and examination reports and quality audit reports
Summa ry:� The above mentioned produet was found to fulfil the requirements in the International Testing Standard IMO Res. MSC 81(70) and current Reg. SOLAS 74 with amendments as stated in Annex A.1, Section l, Part A.1/1.16 and Annex B, Module B of the COUNCIL DIRECTIVE 96/98/EC of 20th December 1996 on marine equipment (changed by the Commission Directive 98/85/EC of 11 th November 1998, Commission Directive 2001/53/EC of 10th July 2001, Commission Direetive 2002/75/EC of 2nd September 2002,
5thEuropean Parliament and Council Directive 2002/84/EC of November 2002, 30thCommission Directive 2008/67/EC of June 2008 and Commission Directive
2012/32/EU of 25 October 2012, 8th Amendment).
The Quality System has been audited and found to correspond to Module E of the above Directive.
Conclusion Based on the above-mentioned attestation it ean be concluded that the equipment fulfils the conditions for obtaining an EC type examination certificate in accordanee with the Danish Maritime Authority Technical Regulation on Marine Equipment No. 1281 of 14 November 2013 for the fulfilment of the 8th Amendment.
![EC-TYPE EXAMINATION CERTIFICATE - Adalet...[14] EC-TYPE EXAMINATION CERTIFICATE No. DEMKO 01 ATEX 130437X Rev. 2 Report: 13NK09771 00-IC-F0056 – Issue 8.1 This certificate may only](https://static.documents.pub/doc/80x56/5f0d9f687e708231d43b44c5/ec-type-examination-certificate-adalet-14-ec-type-examination-certificate.jpg)
