Powerful rare-earth magnets deliver up to 4,620 lbs. of holding power per vise. Reduce setup me by 50% or more. Eliminate workpiece deformaon. ECB Vise Advantages: ECB Magnec Workholding Vises Versatile Magnetic Workholding Solutions for CNC Machining. Our MagVISE line of Magnec Workholding soluons is revolu- onizing producon of all types of applicaons: • Automove industry • Electrical industry • General construcon • Rail producon • Paper industry Machine freely on 5-sides Arrange vises as needed Custom setups for complex parts Powerful, compact workholding soluons for machining all types of parts. Techniks Inc. 9930 E. 56th St. Indianapolis, IN 46236 | 317.803.8000 | email: [email protected]
Transcript
Powerful rare-earth magnets deliver up to 4,620 lbs. of holding power per vise.
Reduce setup time by 50% or more.
Eliminate workpiece deformation.
ECB Vise Advantages:
ECB Magnetic Workholding VisesVersatile Magnetic Workholding Solutions for CNC Machining.
Our MagVISE line of Magnetic Workholding solutions is revolu-tionizing production of all types of applications:
• Automotive industry • Electrical industry • General construction • Rail production • Paper industry
Machine freely on 5-sides Arrange vises as needed Custom setups for complex parts
Powerful, compact workholding solutions for machining all types of parts.
Techniks Inc. 9930 E. 56th St. Indianapolis, IN 46236 | 317.803.8000 | email: [email protected]
Techniks Inc. 9930 E. 56th St. Indianapolis, IN 46236 | 800.597.3921 | www.techniksusa.com | [email protected]
Part No. L x W x H A B Min. Stock Thickness Holding Power Weight
ECB-050 5" x 3" x 3" .47" .47" 0.4" 1,100 lbs. 15 lbs.
ECB-075 6.8" x 3" x 3" .47" .47" 0.4" 1,650 lbs. 19 lbs.
ECB-120 7.3" x 4.2" x 4.2" .62" .59" 0.6" 2,640 lbs. 40 lbs.
ECB-210 9.2" x 5.2" x 5.3" .65" .84" 0.8" 4,620 lbs. 80 lbs.
Part No. Description L x W x H
EEPM-SPF 1, soft fixed induction block, 8mm screw - use with ECB-SP50 spring blocks. 1.97” x 1.97” x 1.23”
EEPM-SP 2, spring loaded induction block, 8mm screw - use with ECB-SPF50 on corners. 1.89” x 1.89” x 1.41”
Holding power depends on workpiece size, material, surface finish, contact area with magnet, and workpiece thickness.
4 sizes available. Each ECB vise includes two induction blocks, wrench, extension and socket, switch-connect socket assembly, 2 stop plates,and 4 toe clamps.
MagVISE ECB Ordering Information
end view side view top and bottom view
Use induction blocks at all times to prevent damage to the face of the magnetic vise. You can easily modify induction blocks to adapt your setup to part requirements.
After installing your ECB vise we recommend cleanup-milling the surface of your induction blocks before loading your work piece to ensure that the surface height is uniform & parallel to the spindle.
Please note: Spring loaded blocks are NOT machineable. Solid blocks ARE able to be drilled and ma-chined as required.
EEPM-SP spring type
EEPM-SPF solid type
Hold large and small parts of all shapesCut complex part shapes O.D. and I.D.Position exactly where you need themMachine freely on 5-sides
