Ecco Finishing Supplies Ltdeccofinishing.weebly.com/uploads/2/7/5/3/27535179/ecco_new...2...

1

Ecco Finishing Supplies Ltd

Equipment - Spares - Hire - Service - Training

NOTES

2

INTRODUCTION

Ecco Finishing Supplies Limited was set up in 1995 and are based in Middlesbrough in the North East of England. From our humble beginnings, Ecco has grown into a global supplier of world class surface preparation and surface finishing products. We are major distributors for many leading brands, for example; Ecco AB; Graco; Wagner; Aristo Spray, Trelawney, Wolf Safety and many more. Today, Ecco Finishing Supplies send their products, including their own range of purpose built Hydra-Cats and PFP (passive fire protection) systems across the world. Our PFP systems are recognised and approved globally for the application of Chartek 7 and Firetex M90 & M93, amongst others. We offer a first class service to many of our customers and we have a team of factory trained Engineers who can travel and work offshore servicing equipment. Ecco also offer a modern, reliable fleet of equipment which is available to hire/rent or buy. Many of our overseas and UK customers use us as a ‘one stop’ shop to supply all of their site requirements, ranging from top brand PPE (Personal Protection Equipment), industrial hoses, fittings and scaffolding equipment to janitorial supplies. If there is anything we can do for you or your business please contact us. Contact details can be found at the back of this catalogue

3

SECTION 1 – Blasting Equipment

SECTION 2 – Spray Painting Equipment

SECTION 3 – Personal Protection Equipment

SECTION 4 –Pneumatic and Electric Equipment

SECTION 5 –Hire and Site Equipment

SECTION 6 – Service and Training

CONTENTS

4

SECTION 1 –

Blasting Equipment

Shotblasting or Blast cleaning is the process by which a surface is either cleaned or prepared for painting, or repainting. Ecco Finishing Supplies have, for sale and for hire, a vast array of blast cleaning and associated equipment. We also have available from stock a huge quantity of high quality consumables. This section will give you an indication of our product range, if you can’t find what you

are looking for, call us to see if we will be able to help.

5

Portable Abrasive Blast

Units

Our portable blast units are built by our highly skilled

and trained Engineers. Over the years we have

received a lot of positive and constructive feedback

which helps us to improve our blast pots accordingly

Features:-

- Our wide range of blast units means that we can cater to your every need,

although, if something is not to your liking, configurations can be made to your

requirements.

- All of Ecco’s units are designed and manufactured to the European Pressure

Equipment Directive 97/23/EC.

- All units are CE marked.

- The units are portable, fixed with heavy duty wheels, ensuring that they are

suitable for contracting site work.

- Available for sale, or to hire with a local call-out system in case of any problems

with a variety of applications.

- Machines can be tailored to suit the specific job requirements, by a selection of

different accessories available.

Model Capacity Shell Diameter Height Dry Weight

S10-10 25kg 10” 715mm 35kg

S10-14 75kg 14” 1125mm 65kg

S10-20 150kg 20” 1000mm 115kg

S10-24 275kg 24” 1350mm 180kg

6

Portable Abrasive Blast

Units

Sizes:- Model 10 – The most compact and smallest unit in the range, which allows easy transportation. Typically used for smaller jobs such as touching up or occasional blasting. Model 14 – Similar to the 10” blast unit, model 14 is easy to manoeuvre and transport by one person, but can hold up to three times more abrasive than the 10” model. Model 20 – This is the most popular unit in our fleet amongst the professional shot blasters. Suited to medium to large projects and would be able to fit in a small van for transportation. Model 24 – The largest unit in Ecco’s fleet, and is ideal for cleaning projects where downtime needs to be minimised.

Abrasive Metering Valves:- Ecco offer a choice of; steel grit valve, Thompson valve, flat sand valve, or a micro valve.

Remote Control System:- We have a choice of: RMS100 and RMV50.

HF Models The blast units listed above can be supplied as a HF model. This is an additional pressure regulator and air operated abrasive metering valve (excluding model 10). This provides exact control of blast pressure and abrasive flow as required for more intricate and delicate work.

Package Options:- The machines can be supplied as a bare unit or a ready to use package with a choice of accessories as listed below: - 10m twin remote lines with Deadman handles - 10m blast hose complete with fittings - 10m breathing air line - The hose lengths can be increased but will incur an additional cost - Blast nozzles - Heavy duty gauntlets - Breathing air filter - Sieves that stop debris from entering the pot, preventing blockages - Lids used to prevent rain and foreign objects entering the pot

7

Blast Cleaning

Surface preparation is used to remove existing paints, corrosion, graffiti or oxidization, it is also used to allow coatings to adhere to the surface. Blast cleaning generally provides the best method of surface preparation.

Advantages of Blast Cleaning:- - Fastest method – compared to wire brush or chipping hammer - Used to remove existing coatings and give surface profile to ensure a strong bond with new coating when applied. - Fastest production of all the different techniques of surface preparation. - Fully controllable. - Low vibration as opposed to alternative methods.

Types of Blasting:- - Wet Blast – used in situations that are dust free, or a gentler blast that wont damage the underlying surface is required. - Pressure Blast – usually used for removing rust from bridges or other steel structures. - Suction Blast – used for more gentle cleaning, and requires less equipment. - Wheel Blast – Used in fixed installations with ball shot to clean and peen surfaces by impact.

Open or Contained Blasting:- - Open Blast – used on site by contractors where the media will not be recovered. - Blast Cabinets – usually used to blast smaller objects in a contained environment. - Blast Rooms – These rooms provide an enclosed environment for containing dusts and collecting and recovering media.

8

Abrasive Blasting Media

A large variety of blast media can be used in the blasting process, and each have their own performance and cost. The main categories of these medias are: -Expendable Abrasives – low cost, one-use abrasive -Reusable Abrasive – more expensive, but can be used several times where collection and recovery is available.

Expendable abrasives are majorly designed for open nozzle blasting, such as mobile blast units where the media cannot be recovered because after one use, the media breaks down and is discarded. None of the products we sell contain ‘free silica’, which allows them to be used without the hazards of silicosis – which occurs if traditional sand is used. Ecco stock a wide range of types and grades to suit your application. The type of abrasive is usually chosen depending on the material or coating to be removed and the substrate material for example; steel, stone or brick.

Expendable Abrasive Specifications

*N.B Grades in BOLD are our most popular sellers. However we supply all grades shown above.

NAME DESCRIPTION TYPICAL USAGE GRADES (PROFILE) /GRAIN SIZE

Olivine

A naturally occurring magnesium-iron silicate

which is a safe alternative to silica sand as an

abrasive.

Suitable for cleaning brick and masonry.

AFS20 (Medium) / 0.355 - 2.36mm AFS30 (Fine) / 0.2 - 1.0mm AFS50 (Super Fine) / 0.125 - 0.5mm AFS80 (Less than Fine) / 0.09 - 0.25mm

Iron Silicate (Copper

Slag)

Brings the best performance in open

nozzle blasting.

Fast and easy removal of rust, millscale and old

paint coatings

1 (Less than Fine) / 0.1 - 0.4mm 2 (Fine) / 0.2-0.85mm 3 (Medium) / 0.2 - 1.70mm 4 (Coarse) / 0.5 - 2.0mm 5 (Coarse) / 0.2 - 2.50mm 6 (Coarse) / 0.2 -2.50mm

Garnet

A naturally occurring ferro-alumiuno silicate which offers benefits in

terms of abrasive consumption and dust

generation compared to conventional expendable

abrasives.

Used for dirt and scale removable and suitable for stainless

steel and non-ferrous metals.

1.40 - 2.00mm 0.60 - 1.40mm 0.355 - 0.850mm 0.200 - 0.600mm 0.180 - 0.350mm

9

Abrasive Blasting Media

Reusable Abrasive Specifications:-

Brown Alumac

Garnet

Iron Silicate Olivine

Steel Shot Glass Bead

Garnet

NAME DESCRIPTION TYPICAL USAGE

Glass Bead

Offers a prismatic characteristic which makes their use in reflective materials of paramount

importance.

Reflective materials from safety wear to signage - critically in the road

marking industry.

Brown Alumac (Aluminium Oxide)

Often used in preparation for paint, metal or plastic spraying. Gives a matt or textured

finish on metals.

Removal of paint, scale or rust. Removal of hard deposits.

Steel Shot A water cast stainless steel abrasive media of

the Chrome Nickel variety. Commonly used for peening metals,

preconditioning and cleaning.

10

Blast Hose

The standard Blast Hose that we supply is ECCOBLAST. It has an excellent abrasion resistance for conveying highly abrasive media such as iron silicate (copper slag), brown Alumac (aluminium oxide) and garnet.

Construction:- Tube – black, natural rubber, antistatic and offers high abrasion Reinforcement – synthetic textile fabrics and conductive copper wire Cover – cloth finish, black SBR rubber

Specifications

Size and Order Codes

Product Code Inside Diameter Outside Diameter

H30-1328-12E 13 mm 28 mm

H30-2539-12E 25 mm 39 mm

H30-3248-12E 32 mm 48 mm

H30-3254-12E 32 mm 54 mm

Working Pressure Safety Factor Standard Temperature Range

12 bar 3:5:1 BS EN ISO 3861 -35°C / +80°C

17

Blast Helmets

Nova 2000 The Nova 2000 is fast becoming the most popular helmet for professional blasters, due to its quiet and comfortable design. It is lightweight and fits firmly around the head. This helmet apparatus consists of three main components: -Helmet assembly -Breathing tube assembly -Air supply hose All three components must be present and properly assembled to constitute a complete EN271 and AS/NZS 1716 approved Compressed Airline Breathing Apparatus.

Apollo 60 This air fed blasting helmet is the ultimate in safety and comfort. It features a double shell construction that provides air circulation around the operators head. Noise levels inside the helmet are kept low, thanks to the exclusive air distribution. Air is brought into the top of the helmet, passes over the entire head and is filtered out through a knitted neck band that gently seals against the operators neck. All air fed blasting helmets are required to be CE Marked by law. The Apollo 60 is marked as complex items under BS EN 271.

18

Blast Helmets &

Accessories The Panorama (yellow) blast helmet’s name originates from its wide field of vision. The Defender blast helmet, also referred to as the Commander, is often favoured by contractors due to its robust and simple design. Both helmets constitute the following: -Fully CE Marked and conform to EN 271 - Lightweight and robust glass fibre reinforced polyester construction -Consumable spares such as replacement visors are available - Screens can easily be changed without removing the helmet - Detachable cape and muffler which can be replaced if necessary - Protected by a rubber coating which also minimises noise - Panorama has a triple protection screen consisting of a polycarbonate inner, protective wire mesh, and tear-off outer visor. - Defender has a triple protection screen consisting of a polycarbonate inner, glass screen, and protective wire mesh

Headset Communication Sets The Consam communication headset fits inside the blast helmet, and allows blaster to communicate with the pot man.

13

Blasting Spares and

Consumables

Climate Control The Vortex air conditioner is created to keep workers wearing air purifying systems comfortable in either hot, or cold conditions using only one device. The Vortex air conditioner uses breathable compressed air to reach temperature ranges of up to circa 20°C cooler or warmer than the inlet temperature.

Technical Information

Materials Aluminium

Weight 400 gram

Airline Pressure 4.5 dynamic pressure

Performance 20°C temp. Difference, heating or cooling

Minimum Airflow 160 l/min. (at 4.5 bar dynamic pressure)

Maximum Airflow 230 l/min. (at 4.5 bar dynamic pressure)

Compressed Air Usage 410 Nl/min (at 4.5 bar dynamic pressure)

Minimum Working Temperature -10°C

Maximum Working Temperature 60°C

Noise Level at 5.5 bar 91 dBA

Maximum Hose Length 50m

Packaging Packed per piece

Respirator Airline Filter The Ecco range of Respirator Airline Filters are designed to reduce odours, oil and water mist from the compressed air stream prior to entering the operator’s helmet. They are available in three different sizes available to suit 1 to 4 blasting operators. -RESPF-1 for one operator -RESPF-3 for up to three operators -RESPF-4 for up to four operators* All units are fitted with pressure regulators and gauges to allow monitoring of the filter condition. Dual action, quick disconnect airline fittings are standard, as required by International Standards, including AS/NZA, CE and NIOSH. There is a standard pressure relief valve fitted on all sizes on the respiratory filters. They also have a manually operated moisture drain fitted as standard. Oil mist density at outlet 1.0 mg/m³. **

Note: Regulatory requirements for breathing air quality will vary depending on your region. -For NIOSH requirements, breathing air must be of Grade D quality -For CE requirements, breathing air must be in accordance with EN1202 -For AS/NZS requirements, breathing air must be in accordance with AS/NZS1715 -*PBF-4 not available to Australia or New Zealand -** Micromist kit is required to comply with AS/NZS1715

Respiratory Filter

Blast Suits

Ecco Blast Suits and Leather Blast Gloves are designed to protect the abrasive blasting operator from the dangers of rebounding abrasive, dust and debris created by the blasting action. They are particularly suited to applications using metallic abrasives such as steel grit and chilled iron grit. The leather fronted blasting suits combine the toughness and durability of the leather covered front, with the lighter weight cotton back section. This design protects the operator while also keeping them cool. The blast suits are available in four sizes; small (S), medium (M), large (L) and extra large (XL).

11

Blasting Spares and

Consumables

Nozzle Holders

NHP0 NHP1 NHP2

Plastic Hose Couplings

CQP1 CQP2 CQP3

Bronze Hose Couplings

CQ0 CQ075 CQ1

CQ2 CQ3

Blast Hose Size ID x OD

Nozzle Holder (plastic)

Gasket for Nozzle

13 x 28 mm NHP0 NG0

25 x 39 mm NHP1 NG25

32 x 48 mm NHP2 NG32



Gasket for Nozzle

25 x 39 mm CQP1 CG15

32 x 48 mm CQP2 CG2

32 x 54 mm CQP3 CG2



Gasket for Nozzle

28 mm CQ0 CG0

34 mm CQ75

CG1 38 mm CQ1

48 mm CQ2

54 mm CQ3

Blasting Spares and

Consumables

This image shows exactly which coupling gasket fits which coupling, and then which size blast hose they fit. It also shows which nozzle holder is used, along with our product codes.

12

Blasting Spares and

Consumables

Blasting Nozzles Our nozzles are available with a choice of liners in a number of styles, lengths and bore sizes. Our Venturi nozzles are available with either a 32mm or 25mm diameter entry. To ensure that these nozzles have a long working life, nozzles should always be placed in the appropriate nozzle holder using the gasket supplied. This gasket should then be replaced at the first sign of wear. We supply a whole range of nozzles including; tungsten carbide aluminium jacketed nozzles, tungsten carbide spinner blast nozzles, nylon jacketed nozzles, straight bore nozzles and Syclone nozzles, double venturi nozzles, hollow blast nozzles jacketed water jet nozzles, angled nozzles and boron alloy nozzles. All Ecco nozzles including the long life, a choice of fine thread, or the coarse contractor thread, provide quick release from the nozzle holder, therefore avoiding grit entrapment. The aluminium jacketed, or PU jacketed nozzles are optional, however both protect the Venturi or Straight bore nozzle insert from damage. If you would like further information on any of these nozzles please contact us.

15

Blasting Spares and

Consumables

Remote Control Systems The popular Ecco Remote Control Deadman Valve (remote control system) incorporates two valves in one body, the lower for compressed air inlet and the upper for controlling the exhaust outlet of the abrasive blast cleaning machine.

The remote control Deadman Valve is fitted to all blast machines as standard. It allows the machine to be depressurized from a remote Deadman handle fitted at the blasting nozzle position and is designed for easy used and maintenance, with the need for tools kept to a minimum. These handles are essential for safe operation of the blast machine.

Moisture Separator Moisture separators are required in shot blasting to remove the moisture from the system before it slows the process down. Moisture in the system can prevent abrasives from flowing properly, therefore a moisture separator is vital to stop water/moisture entering the media and causing blockages.

Abrasive Metering Valves Micro Valve – Typically fitted to a portable blast unit for use with all types of media. Accurate abrasive control and long life. Steel Grit Valve – Fitted to a portable blast unit for use with all types of medias. Thompson Valve - An air operated abrasive metering valve which opens to the preset position on receiving an air signal, eliminating the initial surge of abrasive. Garnet Valve – Cost effective, manually operated ball type abrasive feed control valve, specifically designed for use with garnet abrasive. Flat Sand Valve – The flat sand valve is utilised to provide precise metering of abrasive from the blast unit to the blast hose.

14

Blasting Spares and

Consumables

Code Description

S60-FSV Flat Sand Valve

Code Description

S60-GGV Garnet Valve

Code Description

S60-90107 Thompson Valve

Code Description

S60-SGV Steel Grit Valve

Code Description

S60-MV114 Micro Valve 1-1/4”

16

Blasting Spares and

Consumables

Air Hoses

Improved all rubber construction fully complying with EN ISO 2398 Type 4 Class A specification. • Improved flexibility, particularly in external applications where low temperatures can cause flexing problems with PVC or hybrid hoses. • Better coupling retention due to rubber lining for safer use in application. • Excellent resistance to external abrasion when being dragged. • Excellent value for money. Temperature Range: -35°C to +80°C. Standard Length: 6mm to 16mm - 100 metre 19mm to 25mm - 60 metre. Construction: Lining : Oil Mist Resistant SBR Rubber. Cover : Smooth Yellow SBR Rubber. *Other hose sizes are available upon request.

Fittings Ecco stock and supply many different hose clamps and fittings, and standard nuts and tails from ¼” up to 3”. Double bolt clamps, manifold fittings, cam lock couplings, universal couplings are all available from our extensive range. For offshore applications our hoses are swaged tested and certified with fixed identity tags for full traceability.

19

Blast Lights

Clear visibility during blasting operation is essential to ensure safety and quality of

the blast finish. Adequate lighting is just as important as efficient dust extraction. Our

range of blast lights includes a 12 volt blast hose mounted light which has rubber

housing and can be connected to a portable compressor battery, or similar and our

light which is 110 volt light uses a PAR 38 Light Bulb (also available from Ecco) is

mounted in a bright yellow fibre glass housing.

Code Description

S90-AGBLI Blast Light 12V

S90-AGBL2B Blast Light Bulb, 12V

S90-AGBL3 Blast Lenses S-50 (Single)

Code Description

S90-BLFG Fibre Glass Blast Light

Y10-MP001 Par 38 Spot Bulb 110V 120 Watt

20

Spot Blasting

We offer three different types of Spot Blasting machines which are all ideal for cleaning small areas.

Eductomatic The smallest closed-circuit tool that we supply. It is designed for use with iron or steel grits and it has a combination of the rubber boot around the blast nozzle, a vacuum and a cotton bag for exhausting air that trap the dust and abrasive. The operator can control blasting and recovery with a single trigger handle which has two stages for vacuum only or vacuum blast. The swivel head allows blasting at any angle.

Power Injection Gun The power injection gun is a suction-blast tool that is designed for dry abrasive blasting where the air supply is limited or if the job is too small. This tool is lightweight, compact and ideal where setting up a conventional pressure blast machine would be awkward or inconvenient. The power injection gun can be used with all common media to clean or etch metal or glass, clean masonry and other durable surfaces.

Code Description

S90-E2100-AB Eductomatic - Complete

Spares Available

Technical Data

Air Pressure 90 psi

Air Consumption 30 – 90 cfm

Blast Pattern 30mm approx.

Weight 3 kg

Code Description

S90-SG400PIG Power Injection Blast Gun

Spares Available

21

Spot Blasting

Ibix The Ibix unit is a lightweight and portable blaster that is designed for small repair work. It is a unique, low maintenance unit and features a compact blast gun design which makes it easy to operate in confined areas. This unit is ideal for automotive, shipping and offshore industries. It is fitted with wheels which makes it easy to transport.

Code S90-IBIX-13 S90-IBIX-28

Technical Data Model 13 Model 28

Air Pressure 2 – 7 bar 2 – 7 bar

Air Consumption From 300 l/min From 300 l/min

Grit Grain Size Up to 1.2mm Up to 1.2mm

Hose Length 6m (standard) 6m (standard)

Grit Capacity 13 litres 28.7 litres

Height 95cm 85cm

Width 45cm 45cm

Weight (empty) 12 kg 29 kg

Wet Blasting

Amphibian Blast System The long term development of Blast Cleaning technology has been taken one step further in producing the Amphibian Blast System, which offers efficient cleaning and surface preparation of a wide range of materials, with zero dust levels at high speed. The problem of dust that has always been a major problem when blast cleaning, can now be eliminated by the use of this system. The Amphibian can also offer improvements in terms of efficiency and versatility. The system is portable and based on our advanced slurry system, coating each particle of abrasive with water which both increases its kinetic energy, and contains the dust produced on impact. -Complete pressure control from 1 to 10 bar -Proven in high lead applications -Heavy duty design for industrial applications. Specifications:

Wet Blast Attachment This wet blast attachment fixes to the end of the blast nozzle and injects an even supply of water into the abrasive stream immediately as it leaves the nozzle. This greatly suppresses the amount of dust created by up to 80%.

Model Expendable Abrasive Capacity

Water Capacity Duration (at full pressure)

Amphibian 14 50 kg 40 litres 15 mins

Amphibian 20 100 kg 80 litres 30 min

Amphibian 24 200 kg 115 litres 60 min

22

SECTION 2 –

Spray Painting Equipment

Spray painting is a painting technique where by a device sprays a coating through air onto a surface. The most common categories of spray painting are; airless, air-assisted airless, conventional, HVLP and electrostatic. Please do not hesitate to contact Ecco if you would like more information on the best type of equipment available for your application, we’d be pleased to offer advice

Pneumatic Spray Units

Xtreme (NXT) Pneumatic Airless Sprayer -Tested to out perform and outlast all other sprayers in the market -Designed to withstand the harshest environmental conditions -Easily handles the toughest protective coatings and corrosion control applications -Provides material tracking, system diagnostics and runaway control -More configurations mean you get the right tool for any airless spraying job The NXT Sprayer contains the following: NXT Air Motor -Modular design for easier maintenance -Rugged body armour so it wont rust or dent -Highest technology air motor on the market DataTrak Control -Runaway protection -Pump diagnostics -Material usage -Optional accessory Modular Air Valve -De-ice controls, eliminate icing -Up to 50% quieter than previous models -Modular air valve eliminates stalling and is easy to repair Graco Xtreme Pump Lower with Built-in Filter -Uses half the solvent of other sprayers -Longer-lasting rod Integrated Air Controls -Easy-turn regulator -Front-mounted for convenient access -Compact and modular -Built in filtration

23

Electric Spray Units

Graco® Mark V™ Premium The Graco® Mark V™ Premium is now fully automated, you simply connect your gun and switch the HD prime valve to the AutoClean position, and the system will do the rest. Benefits of this unit: Fast – sprays plasters like paint, at the speed of airless Clean – hardly any projection of material Simple – cleans quickly and automatically

Specification

Part Number G10-249-906

Max. Pressure – bar 230

Weight – kg 59

Flow – l/min With paint: 4:3 – with plaster *up to 5.5

Motor Type DC ‘brushless’ TEFC

Motor rating – kW 1.65

Generator Requirements – kW 5

Popular Spares Manifold filters Inlet strainers Lower pump repair kit

24


Ultra® Max II Platinum 1095 The Graco® Ultra® Max II Premium stands for high performance and reliability. It has over 25 years of experience of proven quality and unmatched on-the-job productivity. Benefits of this unit: QuickReel™ integrated hose reel. No hassle of hose handling E-Control™ - precise pressure control at the end of your hose FastFlush™ - super fast sprayer cleaning system

Specification

Part Number G10-257-042

Max. Pressure – bar 230

Weight – kg 55

Flow – l/min 4.1 l/min

Motor Type DC ‘brushless’ TEFC

Motor rating – kW 1.65

Generator Requirements – kW 5

Popular Spares Manifold filters Inlet Strainer Tips and Guards

25


Q-P025 Electric Airless Pump Packed with features that include an integral toolbox, externally adjustable packings, puncture resistant tyres and a slow stroking, large chromium plated, stainless steel piston, this workhorse from Ecco’s range of Electric Spray Units, is now firmly established. Application - Release agents & oil -Oil/solvent based paints - Primers - Emulsions - Acrylic - Latex paints - Enamels - Lacquers - Varnish - Two-pack coatings - Cladding paints - Timber stains & preservatives

Max tip 0.025” Up to 2.9 litres/min 110V/220V/1300W

26


Q-P036 Electric Airless Pump This is brand new edition to the Ecco range of electric spray units, and it is set to quickly become a leading seller. This pump features an integral toolbox, a digital display and an easy-change filter system. It also boasts a wealth of new features including a powerful 1800 watt DC brushless motor, the 60 second ‘no tools’ removal of the wet end and the option of a large 80 litre plaster hopper.

Application - Release agents & oil -Oil/solvent based paints - Primers - Emulsions - Acrylic - Latex paints - Enamels - Lacquers - Varnish - Elastomerics - Intumescents - Spray joint fillers - Spray plasters - Bituminous coatings - Anti-corrosive agents - Two-pack coatings - Cladding paints - Timber stains and preservatives

Max tip 0.037” Up to 6.5 litres/min 110V/1800W DC brushless motor

Graco XTR Guns The Graco XTR guns have a rugged design in order to handle the toughest protective coatings. Benefits of XTR 7: -Compact design allows for easy manoeuvrability. -Variety of handle and trigger options. -High quality materials and construction. -Lightweight and ergonomic -Maximum working pressure. . . . . . . . 500 bar XTR700: 1-in round handle, four-finger trigger, no tip XTR702: Oval insulated handle, four-finger trigger, XHD RAC tip* XTR703: Oval insulated handle, two-finger trigger, XHD RAC tip* *includes 519 tip

Graco TexSpray™ Blue Gun Unique airless gun design with a large fluid passages and a heavy duty spring. The Graco TexSpray™ Blue Gun is ideal for: -High solids -Smooth plasters -Intumescent paints -Mastics -Protective coatings (For use with an atomizer kit to obtain texture finishes.) -Maximum working pressure. . . . . . . . . . 275 bar

27

Airless Spray Guns

28

Airless Spray Guns

Graco Contractor™ and FTx™ Gun The Graco Contractor ™ airless spray gun is ideal for spraying large surfaces and where a sturdy yet comfortable grip is needed. Maximum working pressure . . . . . . . . . 248 bar The Graco FTx ™ gun is generally used when a fine finish is needed, for general painting applications and where manoeuvrability is required. This is the lightest of the airless spray guns. Maximum working pressure . . . . . . . . 248 bar Both guns feature the following: -Minimum gun spitting -”Easy to reach” trigger lock – simple, thumb engaged safety lock -Easyglide ™ gun swivel for increased manoeuvrability -Quick and consistent needle shut off

Graco Silver Gun Plus The Silver Gun Plus is known for its durability, long life, spraying performance and comfortable design. It is the preferred gun for high pressure applications. -Lightweight, Rugged Design - Forged aluminium is durable to withstand harsh work environments -Exclusive needle design - no trigger adjustments needed -2-Finger trigger design and handle is form fitted for less fatigue -Stainless steel fluid tube - ability to spray heavier materials such as high solid coatings -RAC X Switchtip and Handtite guard provides exceptional life, pattern and finish

Maximum working pressure . . . . . . . . 345 bar

29

Airless Spray Tips

XHD RAC SwitchTip The best choice for spraying high-pressure coatings. -Saves time: no screwdriver required -Change tip sizes in seconds: without removing the tip guard housing -Locking tab ensures tip stays securely in guard -For heavy-duty applications up to 500 bar -Recommended for XTR Airless spray guns

INCHES (MM) .007 .009 .011 .013 .015 .017 .019 .021 .023 .025

2-4 (51-102) 107 109 111 113 115 117 119 121

4-6 (102-152 209 211 213 215 217 219 221 225

6-8 (152-203) 307 309 311 313 315 317 319 321 323 325

8-10 (203-254) 409 411 413 415 417 419 421 423 425

10-12 (254-305) 509 511 513 515 517 519 521 523 525

12-14 (305-356) 609 611 613 615 617 619 621 623 625

14-16 (356-406) 711 713 715 717 719 721 723 725

16-18 (406-457) 813 815 817 819 821 823 825

18-20 (457-508) 923

Flow Rate (gpm) Flow Rate (lpm)

.05

.20 .09 .33

.12

.49 .18 .69

.24

.91 .31 1.17

.38 1.47

.47 1.79

.57 2.15

.67 2.57

INCHES (MM) .027 .029 .031 .033 .035 .037 .039 .041 .043 .045

2-4 (51-102) 139

4-6 (102-152 227 229 231 235 239

6-8 (152-203) 327 329 331 333 335 337 339 341 343 345

8-10 (203-254) 427 429 431 433 435 437 439 441 443 445

10-12 (254-305) 527 529 531 533 535 537 539 541 543 545

12-14 (305-356) 627 629 631 633 635 637 639 641 643 645

14-16 (356-406) 727 729 731 733 735 737 739 741 743

16-18 (406-457) 827 829 831 833 835 837 839 841 843

18-20 (457-508) 927 931 933 935 937 939


.74 2.96

.90 3.42

1.03 3.90

1.17 4.42

1.31 4.98

1.47 5.56

1.63 6.18

1.8 6.83

1.98 7.51

2.17 8.23

30

Airless Spray Tips Cont.

INCHES (MM) .047 .049 .051 .053 .055 .057 .059 .061 0.63 0.65

2-4 (51-102)

4-6 (102-152

6-8 (152-203) 347 351 355

8-10 (203-254) 447 449 451 455 459 461 463 465

10-12 (254-305) 547 549 551 553 555 557 561 565

12-14 (305-356) 647 649 651 655 657 659 661 663 665

14-16 (356-406) 747 749 751 753 755 761

16-18 (406-457) 847 851 855 861 863

18-20 (457-508)


2.37 8.98

2.58 9.76

2.79 10.57

4.26 16.13

3.25 12.29

3.49 13.20

3.74 14.14

4.0 15.12

4.26 16.13

4.53 17.17

INCHES (MM) .067 .069 .071 .075 0.81

2-4 (51-102)

4-6 (102-152

6-8 (152-203)

8-10 (203-254) 467 471 475 481

10-12 (254-305) 567 571 575

12-14 (305-356) 667 669 671 675

14-16 (356-406) 767 771

16-18 (406-457) 867

18-20 (457-508)


4.82 18.24

5.11 19.34

5.41 19.34

6.04 22.85

7.04 26.66

Water @ 2000 psi (138 bar) – paints with a higher viscosity will decrease the flow rate.

GRACO XHD GUARD XHD001 – XHD RAC Guard for pressures up to 500 bar.

31

Plural Component Systems

Ecco PFP (Passive Fire Protection) System Our Variable Ratio PFP System has been approved by most of the world’s leading manufacturers of Intumescent, epoxy based coatings for the application of the likes of Chartek 7, Firetex M90 and M93 and Pitchar. The unit is normally supplied on a steel skid which has fork slots and lifting eyes but can also be supplied on a wheeled base, or containerised to suit the customers requirements. Ecco’s system is built almost entirely from component parts from Graco, and this offers our customers a significant level of reliability and knowledge that spare parts are widely available all around the world. Our engineers travel to our customers site to install and commission the system and will also give application training where required. You can watch our PFP machines in action below, simply follow the link. PFP in Dubai or PFP in Canada

http://www.youtube.com/watch?v=c4B9RQgfCDg

http://www.youtube.com/watch?v=HX1oJYvCdco

Graco XP70 The Graco XP70 Plural-Component sprayer is designed to pump, mix and atomize high-viscosity materials with superior results. This spray system handles: -Environmentally friendly high solid coatings, with little or no solvent -Hybrid polyurethanes -Epoxies -Very high solid coatings – up to 100% solids content -Materials requiring heat -Fast curing materials Typical applications: -Tanks -Pipes -Marine/ship building -Bridges -Wind towers

Technical Specification

32


Fluid Filtration XP Pump Outlets XTR-7 Spray Gun

30 mesh 60 mesh

Air Inlet Filtration 40 micron

Ambient Temperature Range Operating Storage

4° to 54° C (40° to 130°F) -1° to 71° C (30° to 160°F)

Max. Fluid Temp. 71° C (160° F)

Environmental Rating Hazardous Areas

Indoor/Outdoor Ex II 2 G

Fluid Viscosity Range (gravity feed hoppers) 200 – 20,000 cps (pourable)

Higher Viscosities with Pump Feed Pump feed recommended for mix-at-the-gun applications to pre-compress fluids

Max. Air Pressure to supply to the Machine 12 bar (1.2 MPa, 175 psi)

Sprayer Air Consumption 0.56m /min at 7bar/litre/min

Dimensions 132x152x81.6cm (132x152x89cm with 26 litre hopper)

Sound Pressure 86 dBA at 7 bar

Sound Power 98 dBA at 7 bar


Hydracat 1:1 E2K-HV3000 1:1 High volume fixed ratio Hydra Cat System for the application of waterproofing membrane systems for use on bridge decks and roads. -Heavy duty four wheeled cart with steering and “tractor type” pneumatic tyres for easy manoeuvrability around sites. -Graco NXT De-Icing Air Motor with tie rods, quick release connecting couplings and yoke assembly. -Graco (60:1) Xtreme (HP) lower assemblies -Graco Monark (5:1 ratio) Feed Pumps (45 Gallon/210ltr drum length) with stainless steel Y-strainers, regulator, pressure gauge and isolation valve. -Graco Monark (23:1) Pail Mounted Solvent Flush Pump (25ltr pail length) -Machine mounted mixing manifold or optional skid Mounted Remote Mix manifold with pressure feed kit, static mixer and solvent shut-off valve, which is readily adaptable to one or two gun connection. -Compressed air regulator, Air Filter and Lubricator. -High Volume Graco XTR Spray Gun with inline swivel, filter, spray tip and spray tip holder.

33


Hydracat 2:1 The system is mounted on a heavy-duty four-wheeled cart with steering for easy manoeuvrability around work sites, and consists of the following equipment. Features and Benefits: -Rugged four wheeled cart with steering for easy manoeuvrability around work sites. -Outlet manifold with safety relief valves, fluid pressure gauges for each metering pump lower. -Easy access inline high pressure filters, with pressure dump valves. -Graco Monark 5:1 material supply pumps. -Graco President 30:1 solvent flushing pump. -Various configuration options available such as: -Single or twin heated Graco Viscon II high pressure heaters, 110 volt or 240 volt. -Various mixing ratios. -Hot water recirculation system to heat the hose bundle assemblies. -Material heating drum heaters, 120 ltr or 200 ltr thermostatically controlled 110 volt or 240 volt. -Standard 15 metre long hose bundle assembly, which can be extended by joining extra hose bundles together. -Remote mixing block assembly with material on/off valves, material recirculation valves and solvent flushing valves. -Inline mixing tubes, stainless steel reusable or disposable elements.


Graco ProMix 2KS The ProMix 2KS offers precise and reliable electronic proportioning for a broad range of solvent borne, waterborne and acid catalyzed materials. From entry level to upgraded applications, the ProMix 2KS provides flexibility and increased efficiency. With outstanding performance in one easy-to-use design, ProMix 2KS enhances finishing operations. Features: -Manual and automatic configurations -Intrinsically safe fluid panels allow for integration into hazardous areas -Single or multi-colour and catalysts -Accurate ratio assurance for superior finish quality -Simple programming allows fast set up and efficient process control -Advanced web interface provides consolidated system management and reporting

34


Graco Xtreme Mix System Graco XM Plural-Component Sprayers are designed to spray the toughest plural-component materials, with the assurance that you’re spraying accurately and on-ratio. Ideally suited for marine, bridge, rail and wind energy applications, each Graco XM is fully configurable.

36

Conventional Spray

Painting Equipment

Ecco 35 Pressure Feed The Pressure Feed Ecco 35 gains its fluid supply from pressure pots, pumps or circulation systems. The Ecco 35 can also be supplied with an Ergotube which is a unique system to supply air and paint to the spray gun through a patented combo-hose, where the paint hose is placed inside the air hose. Technical Information

Ecco 40 The Ecco 40 is a pressure feed spray gun, and its fluid is supplied in the same way as the Ecco 35, from pressure pots, pumps or circulation systems. Technical Information

Paint Nozzles 0.2 – 2.7mm

Paint Connection G 3/8

Air Connection G 1/4

Air Pressure Max. 7 bar

Air Consumption 250 – 700 l/min

Weight 521 g




Air Pressure Max. 7 bar

Air Consumption 250 – 700 l/min

Weight 568 g

Ecco 35 complete with Ergotube

37

HVLP Equipment

Ecco 65 The Ecco 65 is a pressure feed, HVLP spray gun. Fluid is supplied to the gun from pressure pots, pumps or circulation systems. Technical Information

Ecco 651S The Ecco 651S is a suction feed high volume spray gun. Featuring a 1.0 litre suction cup. Technical Information




Air Pressure Rec. 3 bar

Air Consumption Approx. 260 l/min

Weight 565 g




Air Pressure Rec. 3 bar

Air Consumption Approx. 260 l/min

Weight 947 g

Low Pressure Spray

Equipment

Ecco Feed Spray Packs The Ecco feed spray packs use an air powered piston or diaphragm pump. They are compact and light equipment which makes them ready-to-use and easy to clean. The feed spray packs consist of the following: -Paint feeding pump with silencer and strainer -Paint pressure regulator with gauge for precise settings of the paint pressure. The regulator also works as a pulsation damper -Reduction valve with gauge for precise settings of the air pressure -An Ecco 35 including a paint nozzle and air cap that can handle some of the most common fluids -All necessary valves, hoses and couplings -Earthing device.

Spray Pack 313E Spray Pack 315 (Diaphragm)

Low Pressure Pumps

Ecco Flow M2P 18B and 20B Ecco Flow M2P are small, handy pumps designed for transferring fluids. The applications are for all fluids that need to be transferred. Suitable for all industries. The M2P pumps are small in size and have a low weight which makes it easy to handle and easy to install. M2P20B – for low risk materials. M2P20B – for more abrasive materials. Technical Data

Pressure Ratio 1:2

Max Fluid Pressure 3.7 bar

Capacity -water

40 l/min -35 sec viscosity

Fluid Intake G 1 int.

Fluid Outlet G ½ int.

Max. Working Pressure for Air 7.5 bar

Air Consumption at Air Pressure 6 bar 0 – approx. 200 l/min

Air Connection M2P 18B G ¼ ext.

M2P 20B Quick coupling/air hose 3/8” int.

Sound Level 60 dBA

M2P 18B M2P 20B

42

High Pressure Paint Hoses

High Pressure Paint Hose The high pressure paint hose that Ecco supply is available in the following: - 1-Wire Airless - 2-Wire Airless - Heavy duty


High Pressure Paint Spray Hose 1-Wire Airless Construction Hose Core - Nylon (polyamide) 12 Reinforcement - One layer of braided metal Hose Cover - Pin pricked anti-abrasion polyurethane Temperature Range - -40°C to +93°C

Internal Diameter

External Diameter

Working Pressure Burst Pressure Safety Factor

inch mm mm bar psi bar psi

1/8 3.2 6.9 350 5,079 1,400 20,314 4.0

3/16 4.8 9.3 350 5,079 1,400 20,314 4.0

1/4 6.4 11.7 325 4,716 1,300 18,863 4.0

3/8 9.5 15.5 250 3,628 1,000 14,510 4.0

1/2 12.7 18.5 200 2,902 800 11,608 4.0


High Pressure Paint Spray Hose 2-Wire Airless Construction Hose Core - Nylon (polyamide) 12 Reinforcement - Two layers of braided metal Hose Cover - Pin pricked anti-abrasion polyurethane Temperature Range - -40°C to +93°C

Internal Diameter

External Diameter



1/4 6.4 14.0 475 6,892 1,900 27,569 4.0

3/8 9.5 17.5 450 6,530 1,800 26,118 4.0

1/2 12.7 21.0 350 5,079 1,400 20,314 4.0

3/4 19.1 30.2 275 3,990 1,100 15,961 4.0


High Pressure Paint Spray Hose Heavy Duty (Very High Pressure) Construction Hose Core - Nylon (polyamide) 12 Reinforcement - One layer braided metal + two layers of Aramid fibre Hose Cover - Pin pricked anti-abrasion polyurethane Temperature Range - -40°C to +93°C

Internal Diameter

External Diameter



1/4 6.4 14.7 700 10,157 2,800 40,628 4.0

3/8 9.5 17.5 700 10,157 2,800 40,628 4.0

1/2 12.7 22.0 520 7,545 2,080 30,180 4.0

3/4 19.1 32.0 450 6,530 1,800 26,118 4.0

43

Airless Accessories

Spray Tip Holders

Paint Strainers for Airless Guns

Pump Filters

EBAN 4000 Coating Thickness Meter - Measures all coatings on steel and iron substrates using the magnetic induction principle, ensuring the correct coating thickness has been applied. Other models of the EBAN 4000 can be supplied upon request. TESTEX TAPE and TESTEX GAUGE - A unique replica technique and a simple snap gauge make possible accurate, low-cost blast surface profile measurements. Testex makes surface replicas easy to obtain and produces average maximum peak-to-valley readings that ensure optimum blasting effectiveness. Replicas can be retained for future needs. TRICOMB Wet Film Gauge - Ensures the quality control of the paint thickness while the coating is still wet. Applying too much coating can be expensive. Digital Thermometer - Allows the measurement of the substrate temperature to be taken immediately. This ensures that the substrate can be maintained at a temperature sufficiently above the dew point to prevent moisture forming on the uncoated surface. RH% Dewpoint Meter - Allows the determination of the relative humidity, dew point and air temperature before the application of a coating. Specifications usually detail that the relative humidity and the dew point temperature must be strictly adhered to, and that the surface temperature is monitored. Bresle Test - Many coatings fail due to salts such as chlorides and sulphates contaminating the surface prior to the coating application. This contamination can be tested quickly and simply using the Bresle Test.

44

Paint Testing Equipment

Paint Inspection Kit This inspection kit is a valuable piece of equipment for all industrial painters and paint inspectors, because it enables them to have all the necessary paint inspection equipment to ensure that industrial paint coating is correctly applied throughout the paint coating process. Inside the paint inspection kit you will find:

45

SECTION 3 –

Personal Protection

Equipment

According to The HSE, employers are responsible for providing, replacing and paying for personal protection equipment. PPE should be used when all other measures are inadequate to control exposure. When employees find PPE more comfortable, they are more likely to wear it. Which is why it is important to ensure that the protection equipment fits properly.

46

Personal Protection

Equipment

The types of PPE we sell are:

Respirators

Protective gloves – gauntlets, nitrile, marigolds

Protective clothing, including overalls, general work trousers etc.

Protective footwear – boots, safety wellingtons.

Eye protection – glasses, goggles.

Head protection - helmets

47

SECTION 4 – Pneumatic

and Electric Equipment

All of the equipment available from Ecco is manufactured by World leading companies who supply us with their first class products, which offer you, our customers, proven and reliable equipment for use in the toughest of environments.

Pneumatic and Electric

Equipment

Graco Hydra-Clean™ -Fits most pressure, flow and material requirements -Includes everything needed to use with open-head universal drums -Wall and trolley mounted options available -Designed to be used with cold or hot water up to 95°C -Available with an accumulator and chemical injector -Efficient cleaning with water, detergent or chemical solutions -Supports multiple guns

60


Equipment

Ecco Can Crusher The Ecco Can Crusher is used to reduce most cans and pails of up to 30 litres to a fraction of their original size, resulting in greatly reducing waste which in turn helps to maintain a safer and tidier place Usage: Firstly, the empty can is paced in the crushing compartment. Ensure the door catch is fully closed and secure before starting the crushing cycle. Once the cycle has ended, the crushed can/pail can be removed. Features: -Safe and easy operation -Pneumatic and mechanical safety interlocks, ensuring the door cannot be opened until the crushing cycle is complete -Viewing window -Powder coated finish, which makes for a more robust machine -Pneumatically powered which increases safety and eliminates the need for electrical wiring

Code P90-CC

Description Paint Can Crusher

Overall Weight 95 kg

Height 2.05 m

Width 0.45 m

Depth 0.40 m

Max. Air Supply Operating Pressure 10 bar

Air Consumption (8 bar) 12 cfm

Piston Thrust Force (8 bar) 1.6 T

Max. Diameter of Cans to be Crushed 310 mm

Max. Capacity of Cans to be Crushed 30 L

48


Equipment

VL203/303 Medium Duty Pistol Grip Scaler This pistol grip Scaler features the following: -Medium duty, low vibe pistol grip style Scaler -Lightweight and easy to handle -Requires no additional tools for changing the needles -Reduced vibration which lowers the risk of vibration related injuries and improves operator control.

VL203 Needle VL203 Chisel VL303 Needle VL303 Chisel

Piston Diameter 23.5mm 23.5mm 34.4mm 34.4mm

Weight 2.7kg 3.2 kg 3.51kg 4.25kg

Length 340 mm 395mm 370mm 300mm

B.P.M 2400 2400 3000 3000

Air Consumption 1.89 lps (4.0 cfm)

1.89 lps (4.0 cfm)

2.6 lps (5.5 cfm)

2.6 lps (5.5 cfm)

Noise Level LwA 90.7 dBA 76.3 dBA 109.5 dBA 78.2 dBA

Vibration Level 2.75 m/s² 3.33 m/s² 2.3 m/s² 3.7 m/s²


Equipment

MBX Pneumatic and Electric Bristle Blaster The MBX Bristle blasters performance: -Restoring surfaces from corrosion, mill scale to a near white/white metal visual standard -Improving integrity of treated surfaces – generating a compressive residual stress along treated surface for crack growth resistance, improved fatigue life and improved corrosion resistance -Negligible heat generation – surfaces free of thermal damage/heat marking -Simple and economical – eliminates the need for complex and costly abrasive blast equipment Technical Data

Pneumatic MBX Blaster

Free Speed 3500 rpm +/- 5%

Required Air Pressure

6.2 bar > Bristle Blaster Belt 23mm 5.2 bar > Bristle Blaster Belt 11mm

Average Air Consumption

17.5 cfm +/- 10%

Required Interior Air Hose Size

3/8”

Weight 1.2 kg

Electric MBX Blaster

Free Speed 3200 rpm

Voltage Rating AC (3200)

240 V +/- 10%

Voltage Rating AC (3200A)

120 V +/- 10%

Amperage (3200) 2 A +/- 15%

Amperage (3200A)

4 A +/- 15%

Weight 2.2 kg

49


Equipment

Floor Scrabbler The applications of this pneumatic floor Scrabbler are: -Breaking down hard coatings prior t blast cleaning, reducing cost of spent blast media -Marine industry for removing rust, scale and paint from ships decks -Tank cleaning, de-scaling bottom of tanks.

Weight 36 kg

Length 290 mm

Width 282 mm

Height 1210 mm

Cutting Width 252 mm

B.P.M 11 x 3000

Air Consumption 1982 lpm

Noise Level 113.1 dBA

Vibration Level 5.76 m/s²

50


Equipment

Pneumatic Angle Grinder This angle grinder is lightweight, robust and has a range of grinding discs to suit a wide range of cutting and grinding application. Features: -4”, 5” and 7” grinding discs -Speed governor to insure safe operation -Lightweight, ergonomic design -Spindle lock for fast changing of discs -Rear exhaust -Safety trigger Applications: -Cutting -Grinding -Rust removal Technical Specification

Disc Size 4” (102mm) 5” (127mm) 7” (178mm)

Specification

Speed (rpm) 12,000 12,000 7,000

Average Air Consumption

Vibration Levels (m/s²) 5.1 2.92 6.2

Sound Pressure (dBA) 82.9 83.7 90

Air Inlet (BSP mm) 6.4 (1/4”) 6.4 (1/4”) 9.5 (3/8”)

Dimensions

Length (mm) 185 230 285

Height (mm) 80 89 110

Weight (kg) 1.2 1.9 2.9

51


Equipment

Venturi Fibreglass Ventilators These Venturi Fibreglass Ventilators are: -Lightweight -Portable -For localised fume removal and ventilation Technical Specification

Product Ref.

Diameter Suction End

(mm)

Diameter Exhaust End

(mm)

Length (mm)

Air Consumption

Blow Rate (cfm)

Weight (kg)

INT . EXT INT . EXT

8.2001 200 300 300 350 860 120 3100 7.25

8.2002 150 250 250 325 635 90 2000 5.90

8.2003 250 25 180 200 280 60 1400 1.35

8.2004 75 100 150 230 230 50 1000 0.70

8.2005 50 67 125 140 140 35 800 0.35

52


Equipment

Dust Collectors The Dust Collectors Ecco supply feature the following: -Double filtration -Robust stainless steel -Floor tool kit for general cleaning work -Disposable paper filter or reusable cloth bag -Optional HEPA filter available – for collection of hazardous dust -Fully earth bonded and has an anti-static vacuum and air supply hose Atex approved vacuums are also available upon request.

53


Equipment

Spitznas Pneumatic Air Fans Please note: Type 8.1521 – 300mm, 8.1522 – 400mm and 8.1523 – 500mm are available upon request.

8.1611 12” – 300mm

Air Consumption 52 cfm (1.48 m/3/min)

Air Flow 1590 cfm (45.0 m/3/min)

Air Pressure 5 bar

Weight 13.0 kg


8.1524 24” – 600mm

Air Consumption 135 cfm (3.84 m/3/min)


Air Pressure 5 bar

Weight 58.0 kg


54


Equipment

Spitznas Electric Fan

8.1020.0840 110 Volt 50 Hz 300mm


Weight 20.5 kg


110 Volt 60 Hz

50 Hz with switch

50/60 Hz Switch

240 Volt 50 Hz

55


Equipment

Safety Lights Wolf Air Turbolite A-TL 44A & 45A The Turbolite range is a new generation of high powered, compressed air driven lighting, developed from the well known Wolf Airturbo. -Certified for use in zones 1 and 2 hazardous areas -Common applications: oil and petrochemical industries, tank cleaning and pipeline inspections -Safer alternative to low voltage lighting in dangerously wet conditions.

Product Ref. A-TL44 A-TL45

Product Description Safety bay light, compressed air powered Safety flood light, compressed air powered

Apparatus Standards SFA 3009:1972

Type of Protection “s” special protections

Area of Classification (Gases) Zones 1 and 2, Gas Groups IIA, IIB, IIC

Temp. Classification T4

Ambient Temperature -20°C to +40°C

Certificate BASEEFA Certificate No. Ex 78209

Enclosure Nickel plated brass and gun metal

Lens Ball glass/polycarbonate dome Toughed glass (15mm)

Beam type All-around 360° illumination Flood (as standard) or spot to order

Light Source: Pt No. A-129 (as standard)

A-159 (alternative)

A-129 (as standard)

A-159 (as standard)

Type Tungsten halogen filled filament bulb

Volts 24 V

Watts 250 w

Output 6000 lm 9000 lm 6000 lm 9000 lm

Life 2000 hrs 200 hrs 2000 hrs 200 hrs

Power Source: Type Compressed air driven turbo-alternator

Air Pressure 4.0 – 8.0 bar

Consumption 0.75³/min

Ingress Protection Once pressurised, may be used under water

Weight 7.9 kg 12.2 kg

*Special Certificate Conditions A clean, dry air supply must be used. Supply hose must be anti-static.

56


Equipment

Safety Lights WF300 Wolf ATEX LED Floodlite The WF300 Wolf ATEX LED Floodlite is a high performance, lightweight, portable floodlight for use in temporary applications and installations in potentially explosive atmospheres. -Uses an array of high output, high efficiency LED’s -Gives an excellent flood of brilliant white light -CE Marked to the ATEX directive and IECEx certified for safe use in Zone 1.

Product Ref. WF300

Product Description ATEX LED Floodlite

Equipment Category 2GD

Type of Protection “e” increased safety, ‘mb’ encapsulation, ‘t’ enclosure protection

Area of Classification (gases) Zones 1 and 2, Gas groups IIA, IIB and IIC

Temp. Classification T4

Area of Classification (dusts) Zones 21 and 22, Dust groups IIIA, IIIB and IIIC

Max. Surface Temp. (dusts) T103C

Ambient Pressure -20°C to +50°C

Certificate SIRA10ATEX5117X and IECExSIR10.0016X

Enclosure Marine grade aluminium alloy, epoxy powder coated

Lens Polycarbonate

Beam Type Medium Flood / Wide Flood

Light Source Type 48 x white high power LEDs

Life 100,000 + hours

Power 58 W

Output 3300 lm

Voltage 24V AC/DC +/- 10% 100-254V AC +/- 10%

Weight 9.0 kg (excluding cable)

Ingress Protection IP66/67

Accessories Wolf ATEX Floodlite supplied with bridle and lamp stand for fitting to: Magnet Set WF-696 and Tripod Stand LL-680

57


Equipment

Safety Lights Wolf Tank Lighting Kit -A set of four lamps and G.R.P or stainless steel transformer 110 or 240V -Can include an emergency lamp -Ideal for tank cleaning, shot blasting and painting applications

Tank Lighting Configuration Matrix

Lighting Kit Code LL115 LL215 LL125 LL225 LL116 LL216 LL126 LL226

Certification Code II 2 GD Ex emb II T3/T4 Ex tD A21 IP66/67/68 T100°C

Lamp Models* 4 x LL – 524/20 3 x LL-524/20 & 1 x LL-524/360/20

Lamp Output 4 x 72W 3 x 72W & 1 x 72W (360°)

Transformer LL114 LL214 LL124 LL224 LL114 LL214 LL124 LL224

Transformer Type GRP Stainless Steel GRP Stainless Steel

Transformer Voltage

110V 230V 110V 230V 110V 230V 110V 230V

58


Equipment

Safety Lights Continued

Technical Specification: Wolf ATEX Leadlamp Transformers

Product Reference LL114 LL214 LL124 LL224

Product Description GRP 110V

Transformer

GRP 230V

Transformer

Stainless Steel

110V Transformer

Stainless Steel

230V Transformer

Type of Protection ‘e’ increased safety, ‘d’ flameproof

Area of Classification (gas) Zones 1 & 2, Gas groups IIA, IIB and IIC

Temp. Classification (gas) T3 T4

Area of Classification (dust) Zones 21 & 22

Max. Surface Temp. (dust) T85°C T135°C

Ambient Temp. -20°C to +55°C -20°C to +40°C to 350VA

-20°C to +30°C to 350VA

Certification LCIE02ATEX6248X SIRA08ATEX3182X

Enclosure GRP (glass reinforced polyester)

enclosure, stainless steel skid

Stainless steel enclosure, stainless steel

skid

Power 400 VA

Volts In 110V ac

+6% -10%

230V ac

+6% -10%

110V ac ± 10% 230V ac ± 10%

Input Cable 15m SY cable with ATX 110V / 230V 2P+E plug fitted as standard

Volts Out 24 V

Socket Arrangement 4 output socket, ATX 24V 2P+E as standard

Size – Dimensions 460 x 280 x 450 mm 580 x 370 x 270 mm

Ingress Protection IP 66

Weight 21 kg 23 kg

59

SECTION 5 –

Hire and Site Equipment

Ecco’s hire equipment is available for long and short term hires. The site equipment is available to buy or to hire, dependant on which is best for you. We can offer any products to be available to hire to suit the customer and their budget. All of our equipment is up to date and serviced regularly and where required, is fully pressure tested and certified. Our Engineers have many years experience all types of equipment and are involved in service contracts we have with the likes of Caterpillar and Komatsu for example.

61


Ecco Dx 16 Extremely compact, highly efficient site dust extraction applications. -Bridge maintenance -Marine industry -Heavy industry -Dry docks -Civil engineering Advanced Features -Extremely compact and portable -Lightweight 1500kg -High efficiency filters -Dual electric motors (32 amp) -Automatic reverse pulse -Easy maintenance The Ecco Dx 16 combines its lightweight (1500kg) and compact size, quite operation with the punch of 10,000 cfm. It can be transported on a transit pickup and be offloaded with a forklift or crane. The Ecco Dx 16 has been rigorously field tested and has operated successfully extracting from tank and encapsulated bridges, and the results have been excellent. The Ecco Dx 16 requires only a 32 amp supply to run its 2 x 7.5kW motors and an air supply to operate its reverse pulse jet cartridge cleaning operation. The 20” air inlet is set at an easy accessible working height.

62


Ecco Vac The Ecco Vac is a compact, electrically operated abrasive recovery system. It has been tried and tested in various conditions and has consistently out performed. The Ecco Vac will recover solids in excess of 100m, dependant on particle size and type of material. It has its own built in storage hopper, a large site silo is no longer required, freeing up valuable space on busy sites. The Ecco Vac can be self programmed to dump abrasives at regular intervals into either a dump bag or back into the blast unit. Safety Features: -Safety relief valve to prevent overload if suction hose is choked -Thermal overload relay to protect electrical motor -Emergency stop on control panel Advantages: -Compact -Easy to use -Portable -Efficient to run -Quiet Technical Data

Partial Recovery Rate 3-10 t/hr factors include hose length, number of bends, skill of operator

Max. Recommended Conveying Distance 30m

Electric Requirements 32 amp 3 phase

Air Requirements 15 cfm

Weight 1.2 tonne

Dimensions L 1400 x W 1400 x H 2300 mm

63

SECTION 6 –

Service and Training

Ecco have an on-site training centre, where we offer certified training courses which will cover the following: -Essential knowledge of the techniques, quality standards, and also covers health and safety regulations for both blasting and painting operations. -A practical session in equipment choice, set up and fault diagnosis, and basic servicing. -Bespoke courses can be arranged to suit the customer’s needs. At the end of the training sessions, attendees receive a certificate of attendance and competence. When servicing equipment, our engineers always use specific OEM spares. Our Engineers have current offshore survival certificates and have no issue working overseas. Recent projects have seen them working in Canada, Dubai, Kazakhstan and Azerbaijan. If you would like any more information on the services we offer, training sessions we provide, or to book onto a training course, please contact us. Contact details can be found at the back of this catalogue.

64

Stockists of..

65

Contact and Find Us

Ecco Finishing Supplies Ltd Units 5-9, Letitia Industrial Estate Middlesbrough TS5 4BE Office Tel: +44 (0)1642 219760 / Workshop Tel : +44 (0)1642 243670 Fax: +44 (0)1642 248379 www.eccofinishingsupplies.com [email protected] / [email protected]

We are

here!

http://www.eccofinishingsupplies.com/

mailto:[email protected]

mailto:[email protected]

Ecco Finishing Supplies Ltd Units 5-9, Letitia Industrial Estate

Middlesbrough

TS5 4BE

Tel: +44 (0)1642 219760

Fax: +44 (0)1642 248379

www.eccofinishingsupplies.com

[email protected]

Date post:	25-Mar-2018
Category:	Documents
Upload:	phamanh
View:	221 times
Download:	3 times

Ecco Finishing Supplies Ltdeccofinishing.weebly.com/uploads/2/7/5/3/27535179/ecco_new...2...

Documents