Saving Energy has Never been so Easy!

ECO Energy provides energy saving solutions for commercial, industrial and governmental facilities scientifically proven to significantly reduce the energy consumption and related costs in the areas of lighting, air-conditioning, refrigeration and other inefficient motor-driven equipment. In particular, ECO Energy specializes in providing Real-Time Energy monitoring and LED (light emitting diode) lighting retrofit solutions that are custom-designed to meet the specific needs of improving an organization’s existing interior and exterior lighting.

Average Energy Consumption

HVAC Refrigeration

Other

Lighting

42%

8%25%

25%

Projected Energy Savings

CUES-Refrigeration LED Lighting

Aircosense - HVAC

43%SAVINGSEnjoy a BIG slice of

ECO Energy effectively manage energy to clients reducing energy by as much of 43%

15%

15%

50%

Introduction to Energy Management

The first step in any legitimate energy management program is to take control of the situation and understand the problem – before investments are made in expensive solutions that may, or may not, provide an acceptable result. Next, we recommend the installation of our Eniscope Real-Time Energy Monitor in order to develop a legitimate energy and cost saving program for you. Only then can you accurately monitor, measure and effectively manage the many benefits of the energy saving products we provide in areas such as lighting, air conditioning and refrigeration. Our Eniscope Real-Time Energy Monitor removes the uncertainty and risk and is the foundation upon which our Energy Management System is based.

Commit

1

Introduction to Energy Management

The second step is to use the insightful information provided by our Eniscope to remedy your energy leaks and to save you money. In some cases following the installation of Eniscope, organizations have been able to save up to 40% by implementing no-to-low cost options for eliminating energy waste.Thereafter we will likely recommend selective energy saving products from our extensive portfolio of these products and, with the use of Eniscope, test them meticulously to ensure you get the most cost-effective and legitimate solutions. With Eniscope everything is transparent - all recommendations and solutions are measurable and quantifiable in Real-Time.

Execute

Introduction to Energy Management

2

Right now, up to 40% of your energy is goingto waste. The trouble is identifying which 40%.

Energy Monitor is a unique energy analyzer, which plugs into your system and relays meaningful energy use data and graphical analysis locally and over the web. Please take a look at the real time energy consumption of our office here in Clearwater Florida at http://www.ECOInternal.net

Our Energy Monitor combines world-class metering technology with an advanced energy network controller; putting live readings and real-time graphical logs within reach, 24 hours a day, from your desktop, laptop or mobile phone.

The result? A smaller carbon footprint, better public perception and lower energy costs.

Instantly, you can spot trends, anomalies and wastage, make informed decisions… and see immediate results from improvements you’ve made. You’re in control.

2Execute

T8 18watt=32watt G70 10watt=60watt

Introduction to Energy Management

2Execute

4 x 32W Fluorescent Tubes = 128 Watts*2 x 20W LED tubes = 40 Watts*

Additionally light levels are improved and zero maintenance follows for the next 8.5 years (based on 16W usage / 365 per year).

Watts total a massive68% saving.

*Fixture

Replacing inefficient fluorescent tube lighting to LED tubes typically allows us to replace...

90% Light – 10% Heat

2Execute

Introduction to Energy Management

2Execute

Aircosense is a proprietary product of ECO developed to eliminate the inherent inefficiencies of all

split refrigerant based Air conditioning systems. Aircosense continually monitors cooling comfort and once pre-determined temperatures have been achieved Aircosense takes

advantage of the latent energy stored in the evaporator coils allowing for the compressor to be switched off for substantial periods of time. Occupants

will never realize energy savings are taking place as we intelligently maintain the desired comfort levels.

Aircosense upgrades the efficiency of your system at a fraction of the cost of a new unit.

With Up to 35% Energy Savings…You’ll soon be feeling comfortable in more ways than one.

2

Case Studies

COMMERCIAL

Clearwater FL - 8500 sq ft have average monthly saving US$162.00Annual US$1,944 - R.O.I < 1 Year * Includes VFD on Air Handler.

RESIDENTIAL

Belleair FL - 3000 sq ft have average monthly saving US$96.00Annual US$1,152 - R.O.I < 1 Year

Introduction to Energy Management

2Execute

Introduction to Energy Management

2Execute

AC induction motors consume more than half of all the worlds energy! Unfortunately, motors lack the intelligence to address three key problems that lead to massive energy wastage, unnecessary carbon emissions and wear and tear.2

Execute

Refrigeration units work in a series of cycles - starting and stopping to maintain the required temperature. They usually monitor circulating air temperature in order to decide when to switch on and off - so we call them air cycles. However, circulating air temperature tends to rise quickly, far more quickly than food temperature and, as a result, refrigeration works harder than necessary to maintain stored products at the right temperature. 02

Execute

Finally, once we have helped you control and reduce your energy expenses, remedied your energy leaks and reigned in your wasteful equipment, you can then (at your discretion) begin to consider accessing the longer term benefits of on-site power generation using the various renewable energy sources available to you. The Eniscope will enable your organization to quantify these benefits and even display the ongoing results for the public to see. You may even be able to sell your excess power back to the grid in some cases, thus turning a current liability into an additional profit center for your organization.

Sustain

Introduction to Energy Management

3

Case Studies LED Lighting

Implementation Process: Step-by-Step

1Step Purchase One (1) Eniscope for each Incoming Power Supply

Following the receipt of an executed Eniscope Purchase Order, ECO Energy will install the Eniscope and simultaneously perform a detailed on-site evaluation of the subject facility. During this on-site evaluation, the specific types of electricity-using equipment will be identified, as will the quantities of this equipment (i.e., the specific types and quantity/number of light bulbs, HVAC units, etc).

2Perform a 2- 4 Week Energy Evaluation of the Eniscope-enabled Facility & Energy ReportFollowing the Eniscope installation as described above in Step 1, ECO Energy will remotely monitor and evaluate the energy activities of the subject facility via the Eniscope over a 2 to 4 week period. Your designated personnel will also be able to observe this entire process in Real-Time by simply logging-in online to their Eniscope portal whenever they wish to do so. Once ECO Energy is satisfied that enough information has been obtained during this evaluation period, you will be provided a detailed Energy Evaluation Report showing the findings and recommended solutions in each respective area of the subject facility.

Step

Implementation Process: Step-by-Step

3Step Approve & Implement the Recommended Solutions for the Subject Facility

Once you have reviewed the Energy Evaluation Report for the subject facility and assuming that you desire to proceed with all or some of the recommended solutions therein, ECO Energy will collectively determine with you a sensible and timely implementation of these solutions.

Implementation Process: Step-by-Step

Financing Options

$ECO Energy is keenly aware that no matter how great the annual savings our recommended solutions achieve and no matter how fast your investment is recaptured, your out-of-pocket investment must be minimized as much as possible. That said, ECO Energy provides access to available programs allowing for up to 100% of the total project costs to be financed requiring only a nominal out-of-pocket commitment – typically the first and last months’ payments. See general details below:*

Up to 100% of the project cost can be financed, including all or part of the installation & shipping costs in most cases. Programs designed based on the needs & circumstances of each individual client. Interest/financing rates are fixed & typically range from 8% to 12%. Minimum loan/lease amount of $1,500.00 to over $50 million. Out-of-Pocket Requirement (typical): First & last months’ payments. Minimal paperwork required for most approvals. Approvals for transactions up to $150,000 typically made within 24 hours.

In most cases, the amount of the monthly financing payments will be exceeded by the monthly savings realized beginning immediately following the implementation of ECO Energy’s recommended energy saving product solution(s). Furthermore, most of our available financing programs still allow our clients to achieve their desired ROI/payback timeframe for the project. *All factors subject to final lender underwriting approval.

Financing Options

$

In order for ECO Energy to provide our clients with the significant energy and related-cost benefits described within this overview, we must be confident that we mutually operate in Good Faith throughout our relationship. Of course, this is always the right way to do business. We want to be sure that for all evaluations that ECO Energy performs for you whereby the results meet or exceed your minimum predetermined benchmarks (i.e., savings percentages and ROI/payback timeframes), that we will be given your consent to proceed with our recommended energy saving product solutions.

That said, we would like to propose that if the findings of our evaluation show that we can save the subject facility a minimum savings of at least 25% with an ROI/payback timeframe for the cost of our recommended solutions to be recaptured within 3 years or less, that we have your Good Faith commitment to proceed with us and our recommended ECO Energy solutions for that particular subject facility.

Next Step: Become and ECO Energy Client

Call Us @ 727.331.5075625 South Missouri Ave.Clearwater, FL 33756

Become and ECO Energy Client