of 12
Unleash your creativity with natural materials! A guide for Architects - Version 0.1
Sustainable building going mainstream
Having natural buildings going mainstream demands verified solutions that can be easily applied at the building site combined with creative freedom for the architect. Ecococon straw panels are at the core of such a system achieving beautiful, healthy and energy ecient buildings using renewable materials.
ECOCOCON Building
Characteristics
Extensive use of natural materials - inside and outside
Passivhaus standard applied:
Super insulated envelope
No thermal bridges
Airtightness
Ventilation with heat recovery
Applied building physics and thermal bridge calculations
Standard use of Blower Door Test
Benefits for client
Healthy interior and air quality
Very high comfort, summer and winter
Longterm value due to quality, sustainability and energy independence
Very low running costs
A responsible answer to Global Warming
Sustainable future: today!
Our building system combines the beauty of natural materials with the eciency of the Passivhaus standard. Living sustainable and healthy should be aordable for everybody. Straw panels Ecococon guarantee your clients a life in perfect comfort and a beautiful and healthy indoor environment.
Architects using Ecococon panels will gain extensive experience in designing modern Passivhaus residences from natural materials. Details, cost eective solutions and building physics knowledge is part of the package we provide.
Benefits for architect
Safe, guided introduction to sustainable building
High customer satisfaction
No creative limits
A vision of an architecture that goes the extra mile
Available resources from a growing community of architects, builders and specialists
A complete solution
The benefits of Ecococon panels are in the complete solution they represent.
We provide:
a set of structural elements for all situations
custom sizes that adapt to your design
a complete set of construction details
necessary guidance to achieve Passivhaus standard
understanding of building physics
You concentrate on creating beautiful buildings.
Passivhaus with straw panels Ecococon Design: Createrra
Our quest to create uncompromising, sustainable and healthy homes was finally achieved with Ecococon panels. Our clients are delighted by the low energy bills, quality of building and fabulous comfort we have provided them with.
Bjorn Kierulf Createrra, Slovakia
Ecococon Panels All panels are 400mm thick
Width (or height of Lintel and Sill) can be adjusted from 400 to 1200mm Height (or width of Lintel and Sill) can be adjusted from 400 to 3000mm
The inclined panel has an angle of max. 45
Based on your design we provide you with a complete panel assembly drawing and a detailed 3d model of the construction. Mounting the panels on the building site is as easy and fun as playing with Lego.
Braced Standard Column Inclined Lintel Sill
Physical characteristics of straw panel
Flammability classInside
Outside
Biological research - straw kept under room humidity
conditions, relative air humidity 50%, no mould fungi
development was noticed.Heat transfer coefficient
Pressed straw techmology
Type of wood(planed, calibrated)
Density of pressed straw
Airborne sound insulation index
Straw panel dimensionsvariation for three meters
Peel strength ofpressed straw
Water vapor diffusionresistance (clay plaster)
Clay layer resistance for500 g. ball impact
Straw humidity
0
R = 9,2 (m2K)/W; U = 0,111 W/(m2K)
Multidirectional,Homogeneous
C24 class
100 kg/m 3
54 dB
B-s1, d0
B-s1, d0
< 1 mm 0,040 MPa
9,14
No damage
10 - 12 %
www.ecococon.ltProduct is certified in European UnionCertificate No NT01-061:2013
Characteristics
99% natural materials (cradle to cradle concept)
High insulation value - U-value as low as 0,11 W/m2K
High thermal mass
Very precise (+/- 2mm)
Quick assembly
Earthquake resistant
Fire resistant up to 120min (with applied clay plaster)
Easy to transport
All-year assembly possible
Possible to apply clay plaster directly on the inside straw surface
Safe and verified construction
Controlled and certified production
Ecococon straw panels
ECOCOCON is a modular building system that adapts to the creative needs of the architect and makes life for the builder easy. Easy assembly, very precise elements with +/-2mm tolerance and an all-in-one concept (Structural elements and insulation) make this a cost-eective solution for all parties involved in the building process.
ECOCOCON panels are made from 99% of locally sourced renewable materials, such as straw and wood. Combined with interior clay plaster directly applied on the straw and an exterior layer of wood fibre boards, we provide a complete ecological building system.
Amazing energy eciency
With u-values for the wall as low as 0,11 W/(m2K) it is easy to heat your house with just one small oven once a day (or any other small heating system), and usually the heating season is just 4 months from November to February there will be days in winter when the sun will heat the house all by itself!
Details are designed to achieve optimal thermal bridge values. Not only will you minimise energy losses, but ensure there is no mould growth or longterm moisture damage to the construction.
Our panels do not only save energy for heating and cooling, but have a very low grey (primary) energy content. Production of straw panels Ecococon have a very low energy demand and are produced from quickly regenerating renewable materials. Even the wood content is minimised.
Characteristics
100% natural materials
Gained from sustainable resources
Verified building biology
All natural colours
Use of non-emissive glues and plasters
Benefits
Healthy interior
Very modern designs possible
Exclusive surfaces not achievable with other materials
Homely, warm feeling
Interior only from natural materials
Use of natural materials, VOC free paints and oils ensure a healthy interior climate. Just to name a few, we recommend hemp fibres, wool and wood-fibre for additional insulation, dierent woods and natural linoleum for floors and ceilings, clay plaster in all colours and structures. Tadelact and other techniques the Romans used in their luxury baths can be used to waterproof walls in the bathroom or to create a seamless clay floor
White clay plaster applied directly on straw and artistic designs with modeled clay and earth colors. Such a look can only be achieved with natural materials.
Join a growing community
You are not alone - doing things dierent needs vision, courage and perseverance. This is why being part of a growing community of architects, specialists and builders is a huge boost to your business.
We provide you with:
case studies and customer experience
marketing tools and support
trainings (from Passivhaus concept to clay plaster application)
regular annual meeting of architects, specialists and builders
exchange of experience and know-how
Together we reach further. Be part of a global network that has the power to change the World!
A passivhouse built with straw panels Ecococon in AustriaDesign: Createrra
Available resources We can provide you with resources so that you can start straight away designing beautiful houses from natural materials in Passivhaus standard.
Guides A guide for Clients Infographics with panel information (characteristics, structural strength, delivery and assembly are in the works)
Technical Information National technical approval Certificates Drawings of panels and details
Building Physics The Ecococon Passivhaus Manual Thermal bridge optimised details with Psi calculations WUFI calculation of airtight solution
Marketing Website in many native languages Video and Powerpoint presentations and assembly instructions Case studies and customer experience Vision and activities of the Ecococon Community www.ecococon.lt
Get started today: its time for a new vision that will be satisfying for you, your clients and our future!