20
ISO 60-40 MEDICAL CARTS PROCEDURE | EMERGENCY | MEDICATION | ANESTHESIA EcoLine SOLUTIONS FOR SUPPLY & MEDICATION MANAGEMENT FOR
ISO 60-40 MEDICAL CARTS
PROCEDURE | EMERGENCY | MEDICATION | ANESTHESIA
EcoLine SOLUTIONS FOR SUPPLY &
MEDICATION MANAGEMENT
FOR
Pegasus Medical is the partner of leading healthcare organizations and hospitals in 5 continents.
Our clients recommend our products and solutions since we greatly simplify healthcare materials management with flexible and scalable solutions.We provide significant cost savings, and stand behind our methodology with unmatched expert support.
With over 20 years of experience on medication and hospital supplies management, Pegasus Medical has developed Ecoline carts to provide an ideal combination for hospitals using ISO 60-40 traysand baskets.
PEGASUS MEDICAL
Pegasus Medical is the partner of leading healthcare organizations and hospitals in 5 continents.
Our clients recommend our products and solutions since we greatly simplify healthcare materials management with flexible and scalable solutions.We provide significant cost savings, and stand behind our methodology with unmatched expert support.
With over 20 years of experience on medication and hospital supplies management, Pegasus Medical has developed Ecoline carts to provide an ideal combination for hospitals using ISO 60-40 traysand baskets.
PEGASUS MEDICAL
MEDICAL CARTSPegasus Medical provides a wide range of cartsand trolleys with a variety of available accessories.
Our carts are solid, customizable and affordable. By utilizing a modular structure, we enable a quick reconfiguration of a standard cart into a different unique drawer configuration with a dedicated color coding.
Ecoline is the ideal solution for your medication andhospital supplies management needs.Ecoline drawers are compatible with any ISO 60-40tray / basket. Most important, the position of drawers, trays and baskets can always be redefined.
Hygenic
Smooth and easy-to-clean surfaces
Drawers and tops can be removedfor cleaning
Product specifications developed with the highest infection control standards
Cart Sizes
Compatible with ISO standard modules sized 60x40cm (23.6”x16”)and 30X40cm (12”x16”)Several cart heights available
Flexible
Three different drawer heights available: 5cm, 10cm, 20cm (2”, 4”, 8”)
Drawers configurations can be configured and modified without tools
With countless drawer-dividing possibilities, the compartments can be ideally adapted to the stored articles and the storage space can be optimized
Carts can be customized by adding various accessories
High visibility and well-organized
Full extension drawer: entire contents can be seen when drawer is pulled out
98
cm (
38
.5”)
77 cm (30.5”)
Easy to use
Soft self-closing drawersHigh-quality 125mm non-marking casters designed for easy and smooth cart operationsExtremely easy accessory mounting
Material
Powder-coated steelTop plate and wall bumpers made of ABS plastic
Safety
Extended wheel base ensures the carts stability even when drawers are pulled out
Smooth-running castersFront casters with individual brakes
All EcoLine carts are supplied with a key lock as a standard
MEDICAL CARTSPegasus Medical provides a wide range of cartsand trolleys with a variety of available accessories.
Our carts are solid, customizable and affordable. By utilizing a modular structure, we enable a quick reconfiguration of a standard cart into a different unique drawer configuration with a dedicated color coding.
Ecoline is the ideal solution for your medication andhospital supplies management needs.Ecoline drawers are compatible with any ISO 60-40tray / basket. Most important, the position of drawers, trays and baskets can always be redefined.
Hygenic
Smooth and easy-to-clean surfaces
Drawers and tops can be removedfor cleaning
Product specifications developed with the highest infection control standards
Cart Sizes
Compatible with ISO standard modules sized 60x40cm (23.6”x16”)and 30X40cm (12”x16”)Several cart heights available
Flexible
Three different drawer heights available: 5cm, 10cm, 20cm (2”, 4”, 8”)
Drawers configurations can be configured and modified without tools
With countless drawer-dividing possibilities, the compartments can be ideally adapted to the stored articles and the storage space can be optimized
Carts can be customized by adding various accessories
High visibility and well-organized
Full extension drawer: entire contents can be seen when drawer is pulled out
98
cm (
38
.5”)
77 cm (30.5”)
Easy to use
Soft self-closing drawersHigh-quality 125mm non-marking casters designed for easy and smooth cart operationsExtremely easy accessory mounting
Material
Powder-coated steelTop plate and wall bumpers made of ABS plastic
Safety
Extended wheel base ensures the carts stability even when drawers are pulled out
Smooth-running castersFront casters with individual brakes
All EcoLine carts are supplied with a key lock as a standard
56cm (2
2”)
10
9cm
(4
3”)
52
cm (
20
.5’)
77cm (30.5”)
PROCEDURE CARTS
* Note: Side shelf with gallery top is
optional and should be ordered separately
** Bin should be ordered separately
ACCESSORIES
IV POLE
# CRTA-IVPOLE-HA
Height adjustable IV Pole
Max height 188cm (74”)
WORKTOP & SIDE SHELF *
# CRTA-SLSHLF-R
Worktop: ABS 60x40cm (24x16”)
+ Stainless Steel 40x30cm (16x12”)
WORKTOP GALLERY TOP
# CRTA-TOPPC-3SGT
Worktop: ABS 60x40cm (24x16”)
WORKING SURFACE
# CRTA-TOPPC-ST
Standard for procedure cart
Worktop: 60x40cm (24x16”)
COMBINATION LOCK
# CRTA-MK39/43ELKIT
Electronic Lock With four-digit
user code
KEY LOCK
provided as standard
TILT-BIN HOLDER 2 **
#CATA-TRL-2
Tilt-Bin Holder for 2 Rows
Height above cart: 62.1cm (24.8”)
TILT-BIN HOLDER 3 **
#CATA-TRL-3
Tilt-Bin Holder for 3 Rows
Height above cart: 86cm (34.4”)
Sho
uld
be
ord
ere
d w
ith 1
or 2
accesso
ry rails
ALUMINUM ACCESSORY RAIL
#CRTA-SRAIL-MK/NM
For mounting various accessories
on Carts
GLOVE HOLDER
#CRTA-GLVBX
For holding disposable
glove boxes 24x16.4x9.2cm
(9.6x6.5x3.7”)
SIDE CATHETER BOX
#CRTA-CATH-HLD
10.2x10.2x45cm (4x4x18”)
Steel boxes with flexiglass panel
HAZARD BIN HOLDER
#CRTA-HAZB-HL
Powder coated steel
TRIO GLOVE HOLDER
#CRTA-GLOVBX-3
For holding 3 disposable
glove boxes 24x16.4x9.2cm
(9.6x6.5x3.7”)
SIDE BASKET
#CRTA-SBASKET
Wire Side Basket
44x16x19cm (17.6x6.4x7.6”)
WASTE BASKET
#CRTA-WSBIN
Waste Basket, Large
with Holder 26x20x36.5cm
(10.4x8x14.6”) - 10L
FOLDABLE FRAME
#CRTA-SFRAME-FL
For side Shelf/side Tray
PUSH HANDLE
#CRTA-SRAIL-MK/NM
Aluminum 40cm (16”)
MULTIPLE DRAWER FRONTS CONAFIGURATIONS
Drawer front configuration can be
changed instantly without the use
of tools i.e. single set of 10cm (4”)
drawer can changed with 2 sets of
5cm (2”) drawers .
5cm (2”)
10cm (4”)
20cm (8”)
CRT-M31KL-448
CRT-M35KL-4448
CRT-M39KL-44448
CRT-M43KL-444448
M39-PRO1
56cm (2
2”)
10
9cm
(4
3”)
52
cm (
20
.5’)
77cm (30.5”)
PROCEDURE CARTS
* Note: Side shelf with gallery top is
optional and should be ordered separately
** Bin should be ordered separately
ACCESSORIES
IV POLE
# CRTA-IVPOLE-HA
Height adjustable IV Pole
Max height 188cm (74”)
WORKTOP & SIDE SHELF *
# CRTA-SLSHLF-R
Worktop: ABS 60x40cm (24x16”)
+ Stainless Steel 40x30cm (16x12”)
WORKTOP GALLERY TOP
# CRTA-TOPPC-3SGT
Worktop: ABS 60x40cm (24x16”)
WORKING SURFACE
# CRTA-TOPPC-ST
Standard for procedure cart
Worktop: 60x40cm (24x16”)
COMBINATION LOCK
# CRTA-MK39/43ELKIT
Electronic Lock With four-digit
user code
KEY LOCK
provided as standard
TILT-BIN HOLDER 2 **
#CATA-TRL-2
Tilt-Bin Holder for 2 Rows
Height above cart: 62.1cm (24.8”)
TILT-BIN HOLDER 3 **
#CATA-TRL-3
Tilt-Bin Holder for 3 Rows
Height above cart: 86cm (34.4”)
Sho
uld
be
ord
ere
d w
ith 1
or 2
accesso
ry rails
ALUMINUM ACCESSORY RAIL
#CRTA-SRAIL-MK/NM
For mounting various accessories
on Carts
GLOVE HOLDER
#CRTA-GLVBX
For holding disposable
glove boxes 24x16.4x9.2cm
(9.6x6.5x3.7”)
SIDE CATHETER BOX
#CRTA-CATH-HLD
10.2x10.2x45cm (4x4x18”)
Steel boxes with flexiglass panel
HAZARD BIN HOLDER
#CRTA-HAZB-HL
Powder coated steel
TRIO GLOVE HOLDER
#CRTA-GLOVBX-3
For holding 3 disposable
glove boxes 24x16.4x9.2cm
(9.6x6.5x3.7”)
SIDE BASKET
#CRTA-SBASKET
Wire Side Basket
44x16x19cm (17.6x6.4x7.6”)
WASTE BASKET
#CRTA-WSBIN
Waste Basket, Large
with Holder 26x20x36.5cm
(10.4x8x14.6”) - 10L
FOLDABLE FRAME
#CRTA-SFRAME-FL
For side Shelf/side Tray
PUSH HANDLE
#CRTA-SRAIL-MK/NM
Aluminum 40cm (16”)
MULTIPLE DRAWER FRONTS CONAFIGURATIONS
Drawer front configuration can be
changed instantly without the use
of tools i.e. single set of 10cm (4”)
drawer can changed with 2 sets of
5cm (2”) drawers .
5cm (2”)
10cm (4”)
20cm (8”)
CRT-M31KL-448
CRT-M35KL-4448
CRT-M39KL-44448
CRT-M43KL-444448
M39-PRO1
MEDICATION CARTS
56cm (2
2”)
16
1cm
(6
3”)
43
cm
(1
7”)
77cm (30.5”)
* Note: Side shelf with gallery top is
optional and should be ordered separately
** Bin should be ordered separately
ACCESSORIES
IV POLE
# CRTA-IVPOLE-HA
Height adjustable IV Pole
Max height 188cm (74”)
WORKTOP & SIDE SHELF *
# CRTA-SLSHLF-R
Worktop: ABS 60x40cm (24x16”)
+ Stainless Steel 40x30cm (16x12”)
WORKTOP GALLERY TOP
# CRTA-TOPPC-3SGT
Worktop: ABS 60x40cm (24x16”)
WORKING SURFACE
# CRTA-TOPPC-ST
Standard for procedure cart
Worktop: 60x40cm (24x16”)
COMBINATION LOCK
# CRTA-MK39/43ELKIT
Electronic Lock With four-digit
user code
TILT-BIN HOLDER 2 **
#CATA-TRL-2
Tilt-Bin Holder for 2 Rows
Height above cart: 62.1cm (24.8”)
TILT-BIN HOLDER 3 **
#CATA-TRL-3
Tilt-Bin Holder for 3 Rows
Height above cart: 86cm (34.4”)
Sho
uld
be
ord
ere
d w
ith 1
or 2
accesso
ry rails
ALUMINUM ACCESSORY RAIL
#CRTA-SRAIL-MK/NM
For mounting various accessories
on Carts
GLOVE HOLDER
#CRTA-GLVBX
For holding 3 disposable
glove boxes 24x16.4x9.2cm
(9.6x6.5x3.7”)
SIDE CATHETER BOX
#CRTA-CATH-HLD
10.2x10.2x45cm (4x4x18”)
Steel boxes with flexiglass panel
HAZARD BIN HOLDER
#CRTA-HAZB-HL
Powder coated steel
TRIO GLOVE HOLDER
#CRTA-GLOVBX-3
For holding disposable
glove boxes 24x16.4x9.2cm
(9.6x6.5x3.7”)
SIDE BASKET
#CRTA-SBASKET
Wire Side Basket
44x16x19cm (17.6x6.4x7.6”)
WASTE BASKET
#CRTA-WSBIN
Waste Basket, Large
with Holder 26x20x36.5cm
(10.4x8x14.6”) - 10L
FOLDABLE FRAME
#CRTA-SFRAME-FL
For side Shelf/side Tray
PUSH HANDLE
#CRTA-SRAIL-MK/NM
Aluminum 40cm (16”)
MULTIPLE DRAWER FRONTS CONAFIGURATIONS
M39-MED1
Drawer front configuration can be
changed instantly without the use
of tools i.e. single set of 10cm (4”)
drawer can changed with 2 sets of
5cm (2”) drawers .
5cm (2”)
10cm (4”)
20cm (8”)
CRT-M39KL-44448
+ CRTA-MEDCART-4LVL* Medication cassette item # MED-CAST-4L* Medication drawers item # MED-DWR
CRT-M43KL-444448
+ CRTA-MEDCART-4LVL
MEDICATION CARTS
56cm (2
2”)
16
1cm
(6
3”)
43
cm
(1
7”)
77cm (30.5”)
* Note: Side shelf with gallery top is
optional and should be ordered separately
** Bin should be ordered separately
ACCESSORIES
IV POLE
# CRTA-IVPOLE-HA
Height adjustable IV Pole
Max height 188cm (74”)
WORKTOP & SIDE SHELF *
# CRTA-SLSHLF-R
Worktop: ABS 60x40cm (24x16”)
+ Stainless Steel 40x30cm (16x12”)
WORKTOP GALLERY TOP
# CRTA-TOPPC-3SGT
Worktop: ABS 60x40cm (24x16”)
WORKING SURFACE
# CRTA-TOPPC-ST
Standard for procedure cart
Worktop: 60x40cm (24x16”)
COMBINATION LOCK
# CRTA-MK39/43ELKIT
Electronic Lock With four-digit
user code
TILT-BIN HOLDER 2 **
#CATA-TRL-2
Tilt-Bin Holder for 2 Rows
Height above cart: 62.1cm (24.8”)
TILT-BIN HOLDER 3 **
#CATA-TRL-3
Tilt-Bin Holder for 3 Rows
Height above cart: 86cm (34.4”)
Sho
uld
be
ord
ere
d w
ith 1
or 2
accesso
ry rails
ALUMINUM ACCESSORY RAIL
#CRTA-SRAIL-MK/NM
For mounting various accessories
on Carts
GLOVE HOLDER
#CRTA-GLVBX
For holding 3 disposable
glove boxes 24x16.4x9.2cm
(9.6x6.5x3.7”)
SIDE CATHETER BOX
#CRTA-CATH-HLD
10.2x10.2x45cm (4x4x18”)
Steel boxes with flexiglass panel
HAZARD BIN HOLDER
#CRTA-HAZB-HL
Powder coated steel
TRIO GLOVE HOLDER
#CRTA-GLOVBX-3
For holding disposable
glove boxes 24x16.4x9.2cm
(9.6x6.5x3.7”)
SIDE BASKET
#CRTA-SBASKET
Wire Side Basket
44x16x19cm (17.6x6.4x7.6”)
WASTE BASKET
#CRTA-WSBIN
Waste Basket, Large
with Holder 26x20x36.5cm
(10.4x8x14.6”) - 10L
FOLDABLE FRAME
#CRTA-SFRAME-FL
For side Shelf/side Tray
PUSH HANDLE
#CRTA-SRAIL-MK/NM
Aluminum 40cm (16”)
MULTIPLE DRAWER FRONTS CONAFIGURATIONS
M39-MED1
Drawer front configuration can be
changed instantly without the use
of tools i.e. single set of 10cm (4”)
drawer can changed with 2 sets of
5cm (2”) drawers .
5cm (2”)
10cm (4”)
20cm (8”)
CRT-M39KL-44448
+ CRTA-MEDCART-4LVL* Medication cassette item # MED-CAST-4L* Medication drawers item # MED-DWR
CRT-M43KL-444448
+ CRTA-MEDCART-4LVL
ISOLATION CARTS
56cm (2
2”)
10
9cm
(4
3”)
77cm (30.5”)
* Note: Side shelf with gallery top is
optional and should be ordered separately
ACCESSORIES
WORKTOP & SIDE SHELF *
# CRTA-SLSHLF-R
Worktop: ABS 60x40cm (24x16”)
+ Stainless Steel 40x30cm (16x12”)
WORKTOP GALLERY TOP
# CRTA-TOPPC-3SGT
Worktop: ABS 60x40cm (24x16”)
WORKING SURFACE
# CRTA-TOPPC-ST
Standard for procedure cart
Worktop: 60x40cm (24x16”)
COMBINATION LOCK
# CRTA-MK39/43ELKIT
Electronic Lock With four-digit
user code
Sho
uld
be
ord
ere
d w
ith 1
or 2
accesso
ry rails
ALUMINUM ACCESSORY RAIL
#CRTA-SRAIL-MK/NM
For mounting various accessories
on Carts
GLOVE HOLDER
#CRTA-GLVBX
For holding 3 disposable
glove boxes 24x16.4x9.2cm
(9.6x6.5x3.7”)
HAZARD BIN HOLDER
#CRTA-HAZB-HL
Powder coated steel
TRIO GLOVE HOLDER
#CRTA-GLOVBX-3
For holding disposable
glove boxes 24x16.4x9.2cm
(9.6x6.5x3.7”)
SIDE BASKET
#CRTA-SBASKET
Wire Side Basket
44x16x19cm (17.6x6.4x7.6”)
WASTE BASKET
#CRTA-WSBIN
Waste Basket, Large
with Holder 26x20x36.5cm
(10.4x8x14.6”) - 10L
FOLDABLE FRAME
#CRTA-SFRAME-FL
For side Shelf/side Tray
PUSH HANDLE
#CRTA-SRAIL-MK/NM
Aluminum 40cm (16”)
MULTIPLE DRAWER FRONTS CONAFIGURATIONS
M39-ISO1
Drawer front configuration can be
changed instantly without the use
of tools i.e. single set of 10cm (4”)
drawer can changed with 2 sets of
5cm (2”) drawers .
5cm (2”)
10cm (4”)
20cm (8”)
CRT-M35KL-4448
CRT-M39KL-44448
ISOLATION CARTS
56cm (2
2”)
10
9cm
(4
3”)
77cm (30.5”)
* Note: Side shelf with gallery top is
optional and should be ordered separately
ACCESSORIES
WORKTOP & SIDE SHELF *
# CRTA-SLSHLF-R
Worktop: ABS 60x40cm (24x16”)
+ Stainless Steel 40x30cm (16x12”)
WORKTOP GALLERY TOP
# CRTA-TOPPC-3SGT
Worktop: ABS 60x40cm (24x16”)
WORKING SURFACE
# CRTA-TOPPC-ST
Standard for procedure cart
Worktop: 60x40cm (24x16”)
COMBINATION LOCK
# CRTA-MK39/43ELKIT
Electronic Lock With four-digit
user code
Sho
uld
be
ord
ere
d w
ith 1
or 2
accesso
ry rails
ALUMINUM ACCESSORY RAIL
#CRTA-SRAIL-MK/NM
For mounting various accessories
on Carts
GLOVE HOLDER
#CRTA-GLVBX
For holding 3 disposable
glove boxes 24x16.4x9.2cm
(9.6x6.5x3.7”)
HAZARD BIN HOLDER
#CRTA-HAZB-HL
Powder coated steel
TRIO GLOVE HOLDER
#CRTA-GLOVBX-3
For holding disposable
glove boxes 24x16.4x9.2cm
(9.6x6.5x3.7”)
SIDE BASKET
#CRTA-SBASKET
Wire Side Basket
44x16x19cm (17.6x6.4x7.6”)
WASTE BASKET
#CRTA-WSBIN
Waste Basket, Large
with Holder 26x20x36.5cm
(10.4x8x14.6”) - 10L
FOLDABLE FRAME
#CRTA-SFRAME-FL
For side Shelf/side Tray
PUSH HANDLE
#CRTA-SRAIL-MK/NM
Aluminum 40cm (16”)
MULTIPLE DRAWER FRONTS CONAFIGURATIONS
M39-ISO1
Drawer front configuration can be
changed instantly without the use
of tools i.e. single set of 10cm (4”)
drawer can changed with 2 sets of
5cm (2”) drawers .
5cm (2”)
10cm (4”)
20cm (8”)
CRT-M35KL-4448
CRT-M39KL-44448
ANESTHESIA CARTS
56cm (2
2”)
10
9cm
(4
3”)
52
cm (
20
.5”)
77cm (30.5”)
MULTIPLE DRAWER FRONTS CONAFIGURATIONS
M39-ANS1
Drawer front configuration can be
changed instantly without the use
of tools i.e. single set of 10cm (4”)
drawer can changed with 2 sets of
5cm (2”) drawers .
5cm (2”)
10cm (4”)
20cm (8”)
* Note: Side shelf with gallery top is
optional and should be ordered separately
** Bin should be ordered separately
ACCESSORIES
WORKTOP & SIDE SHELF *
# CRTA-SLSHLF-R
Worktop: ABS 60x40cm (24x16”)
+ Stainless Steel 40x30cm (16x12”)
WORKTOP GALLERY TOP
# CRTA-TOPPC-3SGT
Worktop: ABS 60x40cm (24x16”)
WORKING SURFACE
# CRTA-TOPPC-ST
Standard for procedure cart
Worktop: 60x40cm (24x16”)
COMBINATION LOCK
# CRTA-MK39/43ELKIT
Electronic Lock With four-digit
user code
TILT-BIN HOLDER 2 **
#CATA-TRL-2
Tilt-Bin Holder for 2 Rows
Height above cart: 62.1cm (24.8”)
TILT-BIN HOLDER 3 **
#CATA-TRL-3
Tilt-Bin Holder for 3 Rows
Height above cart: 86cm (34.4”)
Sho
uld
be
ord
ere
d w
ith 1
or 2
accesso
ry rails
ALUMINUM ACCESSORY RAIL
#CRTA-SRAIL-MK/NM
For mounting various accessories
on Carts
ALUMINUM ACCESSORY RAIL MUU
#CRTA-SRAIL-MUU39
For mounting various accessories
on MUU Carts
GLOVE HOLDER
#CRTA-GLVBX
For holding disposable
glove boxes 24x16.4x9.2cm
(9.6x6.5x3.7”)
SIDE CATHETER BOX
#CRTA-CATH-HLD
10.2x10.2x45cm (4x4x18”)
Steel boxes with flexiglass panel
HAZARD BIN HOLDER
#CRTA-HAZB-HL
Powder coated steel
TRIO GLOVE HOLDER
#CRTA-GLOVBX-3
For holding 3 disposable
glove boxes 24x16.4x9.2cm
(9.6x6.5x3.7”)
SIDE BASKET
#CRTA-SBASKET
Wire Side Basket
44x16x19cm (17.6x6.4x7.6”)
WASTE BASKET
#CRTA-WSBIN
Waste Basket, Large
with Holder 26x20x36.5cm
(10.4x8x14.6”) - 10L
PUSH HANDLE
#CRTA-SRAIL-MK/NM
Aluminum 40cm (16”)
PUSH HANDLE
#CRTA-ALPH-MUU39
Aluminum 60cm (24”)
CRT-M39KL-44448
CRT-MUU39-44448
CRT-M43KL-444448
ANESTHESIA CARTS
56cm (2
2”)
10
9cm
(4
3”)
52
cm (
20
.5”)
77cm (30.5”)
MULTIPLE DRAWER FRONTS CONAFIGURATIONS
M39-ANS1
Drawer front configuration can be
changed instantly without the use
of tools i.e. single set of 10cm (4”)
drawer can changed with 2 sets of
5cm (2”) drawers .
5cm (2”)
10cm (4”)
20cm (8”)
* Note: Side shelf with gallery top is
optional and should be ordered separately
** Bin should be ordered separately
ACCESSORIES
WORKTOP & SIDE SHELF *
# CRTA-SLSHLF-R
Worktop: ABS 60x40cm (24x16”)
+ Stainless Steel 40x30cm (16x12”)
WORKTOP GALLERY TOP
# CRTA-TOPPC-3SGT
Worktop: ABS 60x40cm (24x16”)
WORKING SURFACE
# CRTA-TOPPC-ST
Standard for procedure cart
Worktop: 60x40cm (24x16”)
COMBINATION LOCK
# CRTA-MK39/43ELKIT
Electronic Lock With four-digit
user code
TILT-BIN HOLDER 2 **
#CATA-TRL-2
Tilt-Bin Holder for 2 Rows
Height above cart: 62.1cm (24.8”)
TILT-BIN HOLDER 3 **
#CATA-TRL-3
Tilt-Bin Holder for 3 Rows
Height above cart: 86cm (34.4”)
Sho
uld
be
ord
ere
d w
ith 1
or 2
accesso
ry rails
ALUMINUM ACCESSORY RAIL
#CRTA-SRAIL-MK/NM
For mounting various accessories
on Carts
ALUMINUM ACCESSORY RAIL MUU
#CRTA-SRAIL-MUU39
For mounting various accessories
on MUU Carts
GLOVE HOLDER
#CRTA-GLVBX
For holding disposable
glove boxes 24x16.4x9.2cm
(9.6x6.5x3.7”)
SIDE CATHETER BOX
#CRTA-CATH-HLD
10.2x10.2x45cm (4x4x18”)
Steel boxes with flexiglass panel
HAZARD BIN HOLDER
#CRTA-HAZB-HL
Powder coated steel
TRIO GLOVE HOLDER
#CRTA-GLOVBX-3
For holding 3 disposable
glove boxes 24x16.4x9.2cm
(9.6x6.5x3.7”)
SIDE BASKET
#CRTA-SBASKET
Wire Side Basket
44x16x19cm (17.6x6.4x7.6”)
WASTE BASKET
#CRTA-WSBIN
Waste Basket, Large
with Holder 26x20x36.5cm
(10.4x8x14.6”) - 10L
PUSH HANDLE
#CRTA-SRAIL-MK/NM
Aluminum 40cm (16”)
PUSH HANDLE
#CRTA-ALPH-MUU39
Aluminum 60cm (24”)
CRT-M39KL-44448
CRT-MUU39-44448
CRT-M43KL-444448
ACCESSORIES
EMERGENCY CARTS
SEAL LOCK
#CRTA-BRO-LOCK
Breakaway/Seal Lock
OXYGEN CYLINDER
#CRTA-OXBH1
Side Oxygen Cylinder
PVC-coated steel wire
CARDIAC BACKBOARD
#CRTA-CARBACKB
With hanging hooks
Acrylic 51x44cm (20.4x17.6”)
DEFIBRILLATOR ARM
#CRTA-SDIFARM
Swiveling Defibrillator Arm
Powder-coated steel 56cm (2
2”)
10
9cm
(4
3”)
77cm (30.5”)
MULTIPLE DRAWER FRONTS CONAFIGURATIONS
M39-EMR1
Drawer front configuration can be
changed instantly without the use
of tools i.e. single set of 10cm (4”)
drawer can changed with 2 sets of
5cm (2”) drawers .
5cm (2”)
10cm (4”)
20cm (8”)
IV POLE
# CRTA-IVPOLE-HA
Height adjustable IV Pole
Max height 188cm (74”)
WORKTOP & SIDE SHELF *
# CRTA-SLSHLF-R
Worktop: ABS 60x40cm (24x16”)
+ Stainless Steel 40x30cm (16x12”)
WORKTOP GALLERY TOP
# CRTA-TOPPC-3SGT
Worktop: ABS 60x40cm (24x16”)
WORKING SURFACE
# CRTA-TOPPC-ST
Standard for procedure cart
Worktop: 60x40cm (24x16”)
Sho
uld
be
ord
ere
d w
ith 1
or 2
accesso
ry rails
ALUMINUM ACCESSORY RAIL
#CRTA-SRAIL-MK/NM
For mounting various accessories
on Carts
GLOVE HOLDER
#CRTA-GLVBX
For holding disposable
glove boxes 24x16.4x9.2cm
(9.6x6.5x3.7”)
HAZARD BIN HOLDER
#CRTA-HAZB-HL
Powder coated steel
WASTE BASKET
#CRTA-WSBIN
Waste Basket, Large
with Holder 26x20x36.5cm
(10.4x8x14.6”) - 10L
PUSH HANDLE
#CRTA-SRAIL-MK/NM
Aluminum 40cm (16”)
* Note: Side shelf with gallery top is
optional and should be ordered separately
CRT-M39KL-44448
CRT-M43KL-444448
ACCESSORIES
EMERGENCY CARTS
SEAL LOCK
#CRTA-BRO-LOCK
Breakaway/Seal Lock
OXYGEN CYLINDER
#CRTA-OXBH1
Side Oxygen Cylinder
PVC-coated steel wire
CARDIAC BACKBOARD
#CRTA-CARBACKB
With hanging hooks
Acrylic 51x44cm (20.4x17.6”)
DEFIBRILLATOR ARM
#CRTA-SDIFARM
Swiveling Defibrillator Arm
Powder-coated steel 56cm (2
2”)
10
9cm
(4
3”)
77cm (30.5”)
MULTIPLE DRAWER FRONTS CONAFIGURATIONS
M39-EMR1
Drawer front configuration can be
changed instantly without the use
of tools i.e. single set of 10cm (4”)
drawer can changed with 2 sets of
5cm (2”) drawers .
5cm (2”)
10cm (4”)
20cm (8”)
IV POLE
# CRTA-IVPOLE-HA
Height adjustable IV Pole
Max height 188cm (74”)
WORKTOP & SIDE SHELF *
# CRTA-SLSHLF-R
Worktop: ABS 60x40cm (24x16”)
+ Stainless Steel 40x30cm (16x12”)
WORKTOP GALLERY TOP
# CRTA-TOPPC-3SGT
Worktop: ABS 60x40cm (24x16”)
WORKING SURFACE
# CRTA-TOPPC-ST
Standard for procedure cart
Worktop: 60x40cm (24x16”)
Sho
uld
be
ord
ere
d w
ith 1
or 2
accesso
ry rails
ALUMINUM ACCESSORY RAIL
#CRTA-SRAIL-MK/NM
For mounting various accessories
on Carts
GLOVE HOLDER
#CRTA-GLVBX
For holding disposable
glove boxes 24x16.4x9.2cm
(9.6x6.5x3.7”)
HAZARD BIN HOLDER
#CRTA-HAZB-HL
Powder coated steel
WASTE BASKET
#CRTA-WSBIN
Waste Basket, Large
with Holder 26x20x36.5cm
(10.4x8x14.6”) - 10L
PUSH HANDLE
#CRTA-SRAIL-MK/NM
Aluminum 40cm (16”)
* Note: Side shelf with gallery top is
optional and should be ordered separately
CRT-M39KL-44448
CRT-M43KL-444448
MOBILE WORKING STATION SMALL FOOTPRINT CARTS
Extremely large working surface
10 full sized 40X60cm creating extremely high storage capacity
Ideal for intensive care units, eliminate the need for fixed cabinetry in the room. Carts can be exchanged and clean between the different patients.
Extremely light and maneuverable
Equipped with 30X40 cm dividable modules
Can be easily pulled/pushed between patient’s beds
All drawer modules can be easily removed for cleaning purposes
Electronic and mechanical locking solutions are available.
10
4cm
(4
1”)
11
2cm
(4
4”)
10
0 c
m (
39
”)
88
cm (
34
.5”)
104cm (41”)47cm (18.5’)
56cm (22”)
CRT-NM43KL-444448CRT-MUU39-44448 CRT-NM39KL-44448 CRT-NM35KL-4448
76cm (30”)
MOBILE WORKING STATION SMALL FOOTPRINT CARTS
Extremely large working surface
10 full sized 40X60cm creating extremely high storage capacity
Ideal for intensive care units, eliminate the need for fixed cabinetry in the room. Carts can be exchanged and clean between the different patients.
Extremely light and maneuverable
Equipped with 30X40 cm dividable modules
Can be easily pulled/pushed between patient’s beds
All drawer modules can be easily removed for cleaning purposes
Electronic and mechanical locking solutions are available.
10
4cm
(4
1”)
11
2cm
(4
4”)
10
0 c
m (
39
”)
88
cm (
34
.5”)
104cm (41”)47cm (18.5’)
56cm (22”)
CRT-NM43KL-444448CRT-MUU39-44448 CRT-NM39KL-44448 CRT-NM35KL-4448
76cm (30”)
CARTS CONFIGURATIONS
CRT-M39KL-44448 + CRTA-TOPPC-3SGT
EcoLine cart with drawers,
Standard cart configuration:4x10cm (4x4”), 1x20cm (1x8”)
Ecoline carts drawer fronts configurations
The Ecoline carts product range is extremely diversified, Here are some examples for the available configurations of the high procedure cart 109cm (43”):
2x5cm (2x2”)5x10cm (5x4”)
2x5cm (2x2”)3x10cm (3x4”)1x20cm (1x8”)
2x10cm (2x4”)2x20cm (2x8”)
4x5cm (4x2”)2x20cm (2x8”)
3x20cm (1x8”)
4x5cm (4x2”)2x10cm (2x4”)1x20cm (1x8”)
2x5cm (2x2”)1x10cm(1x4”)2x20cm (2x8”)
4x5cm (4x2”)4x10cm (4x4”)
6x10cm (6x4”)
CRT-M39KL-2244444
CRT-M39KL-4488
CRT-M39KL-22228
CRT-M39KL-224448
CRT-M39KL-888
CRT-M39KL-2222448
CRT-M39KL-444444
CRT-M39KL-22488
CRT-M39KL-22224444
77cm (30.5”) 56cm (22”)
STANDARD WORKING SURFACE 74CM (29”) 86CM (34”) 98CM (38.5”) 110CM (43.5”)
80CM (31.5”) 92CM (36”) 104CM (41”) 116CM (46”)
85CM (33.5”) 97CM (38”) 109CM (43”) 121CM (48”)
WORKTOP GALLERY TOP
WORKTOP & SIDE SHELF
CRT-M31KL- 448 CRT-M35KL- 4448 CRT-M39KL- 44448 CRT-M43KL-444448Heights chart:
CARTS CONFIGURATIONS
CRT-M39KL-44448 + CRTA-TOPPC-3SGT
EcoLine cart with drawers,
Standard cart configuration:4x10cm (4x4”), 1x20cm (1x8”)
Ecoline carts drawer fronts configurations
The Ecoline carts product range is extremely diversified, Here are some examples for the available configurations of the high procedure cart 109cm (43”):
2x5cm (2x2”)5x10cm (5x4”)
2x5cm (2x2”)3x10cm (3x4”)1x20cm (1x8”)
2x10cm (2x4”)2x20cm (2x8”)
4x5cm (4x2”)2x20cm (2x8”)
3x20cm (1x8”)
4x5cm (4x2”)2x10cm (2x4”)1x20cm (1x8”)
2x5cm (2x2”)1x10cm(1x4”)2x20cm (2x8”)
4x5cm (4x2”)4x10cm (4x4”)
6x10cm (6x4”)
CRT-M39KL-2244444
CRT-M39KL-4488
CRT-M39KL-22228
CRT-M39KL-224448
CRT-M39KL-888
CRT-M39KL-2222448
CRT-M39KL-444444
CRT-M39KL-22488
CRT-M39KL-22224444
77cm (30.5”) 56cm (22”)
STANDARD WORKING SURFACE 74CM (29”) 86CM (34”) 98CM (38.5”) 110CM (43.5”)
80CM (31.5”) 92CM (36”) 104CM (41”) 116CM (46”)
85CM (33.5”) 97CM (38”) 109CM (43”) 121CM (48”)
WORKTOP GALLERY TOP
WORKTOP & SIDE SHELF
CRT-M31KL- 448 CRT-M35KL- 4448 CRT-M39KL- 44448 CRT-M43KL-444448Heights chart:
