Date post: | 30-Mar-2016 |
Category: |
Documents |
Upload: | deskdesign |
View: | 226 times |
Download: | 3 times |
en
PROFESSIONAL EQUIPMENT
2014W
ORK
REST
RAIN
T
WOR
K PO
SITI
ONIN
G
FALL
ARR
EST
ROPE
ACC
ESS
ROPE
PAR
KS
CANY
ONIN
G
SPEL
EOLO
GY
ARBO
RIST
FIRE
FIGH
TERS
RESC
UE
POLI
CE
MIL
ITAR
Y
2
INDUSTRIAL TECHNOLOGY
Coloured filament integrated into the rope indicating
the year of manufacture.
Thin band running through the rope indicating its type, diameter, the standard
it conforms to and year of manufacture.
NB: A security rope is always of core and sheath construction.
The sheath: serves to protect the rope
from abrasion.
The core: the heart of the rope, providing the majority of its
strength.
For over 220 years EDELWEISS has accompanied the mountaineering pioneers and continues today to
be present alongside athletes and professionals in height. With this experience, punctuated by constant
innovation and quality research, we can be a key player in your safety. Our goal remains to connect you
to the life. EDELWEISS “Stay connected”.
THE SEMI-STATIC ROPESThese are sometimes wrongly called static. They allow access to, and position-ing at the worksite. They have moderate stretch, which allows them to absorb sufficient energy to arrest falls of factor 0.3.
The types of RopesThere are two types of ropes.• Type A: Rope for use in rescue, or as a working or security line for work at height. In the latter case it is used for access to the place of work in combina-tion with other items of equipment, or to undertake work under tension or in suspension on the rope.• Type B: Rope of lesser diameter and strength than Type A, demanding greater precautions and attention to security during use.
Storage and lifetimeThe working life depends on the frequency and the type of use.Abrasion, UV exposure and humidity gradually degrade the properties of the rope. Note that with use, a rope thickens and thus loses up to 10 % length.
Storage time: In good storage conditions a rope may be kept for 5 years before first use without affecting its future lifetime duration in use.
Lifetime in use: A rope could be destroyed during its first use. It is the inspec-tions which determine if the product must be scrapped more quickly. Proper storage between uses is essential. The lifetime of the rope in use must never exceed 10 years. The total maximum lifetime (storage before use + lifetime in use) is thus limited to 15 years.
THE DYNAMIC ROPES In certain work at height, or rescue, situations, you may need to use dynamic ropes, for example for setting up anchorages.
In effect, if you are exposed to positions where the rope could take a fall factor greater than 0.3 it is imperative to use a dynamic rope (EN892), the only type capable of absorbing a resultant fall. (NB the techniques of belaying with dynamic ropes are different to those for semi-static ropes, and necessitate professional training).
The often very hard wear conditions imposed on ropes during work or on rescues means that the toughest choice should be made.
5 m 5 m
2,5 m2,5 m
2,5
m
1 2
5,0 m=
2,5 m
Factor 2
DANGER
5,0 m=
5,0 m
Factor 1
OK
FALL FACTORTotal height of fallLenght of rope used
= Fall factor
1
5 m of fall2,5 m of rope used
= Factor 2 DANGER
Fall factor must always be under 2.
2
5 m of fall 5 m of rope used
= Factor 1 OK
10 11 12 13 14 15 16 17 18 19
knot
ted
term
inatio
ns
3
WORK AT HEIGHT
knot
ted
term
inatio
ns
TESTED AND APPROVEDFall factor F: The fall factor is the ratio of the length of the fall taken to the length of rope which arrests it.
Impact force IF: This is the force which is transmitted to person, connector and anchor point during the arrest of a fall. The impact force given in the performance tables is that obtained by a fall factor 0,3 with a 100 Kg mass for type A ropes, and an 80 Kg mass for type B ropes. This is required to be less than 6 kN.
Number of falls: The number of falls sustained is determined on a rig which reproduces factor I falls.The terminations on the test length are made with figure of 8 knots. The drop falls are made at intervals of three minutes. Five falls must be sustained, using a 100 Kg mass for type A, 80 Kg for type B.
Elongation E: This is the elongation of the rope which occurs between loads of 50 Kg and 150 Kg. It must not exceed 5 %.
Knotability K: A single overhand knot is tensioned with a 10 Kg weight for one minute, then the internal diameter of the knot is measured with the tension reduced to 1 Kg. The internal diameter divided by the rope diameter: K < 1,2.Sheath slippage S: 2 m of rope is placed in the pulling rig and drawn through it 5 times. Sheath slippage must not exceed 15 mm for type B ropes, and (20 + 10 (D - 9)) mm where D is the rope diameter, for type A ropes.
Shrinkage R: The percentage shrinkage of the rope after soaking in water for 24 hours.
Mass of the sheath: The minimum sheath percentage which must compose the rope is calculated by S = ((4D - 4) / D²) x 100 where D is the rope diameter.
Static strength: The force required to break the rope when it is pulled slowly. type A ropes must exceed 22 kN, type B ropes 18 kN.
Static strength with knotted terminations: A sample of the rope terminated with a figure of 8 must withstand for 3 minutes a force of 15kN (type A) 12kN (type B).
Rope identification: The rope has a band fastened at its end indicating its type: Type A or B, its diameter, the name of the manufacturer, and the number of the Euro Norm to which it conforms.
Meaning of markings: CE : Conformity to the European directive0120 : Number of the Notified BodyEN1891 : Technical reference.
EUROPEAN STANDARDSEDELWEISS production follows a very high technical standard to ensure safety. Our ISO 9001 manufacturing process guarantees consistent quality. Our Personal Protective Equipment meets and even exceeds the relevant EN standards.
Fall factor Impact force Elongation Knotability Static strength with
knotted terminations
Conformity to standards Type
4
CONCEPTS
Termination SequoiaTermination QuercusTermination Proline
UNICORE CONCEPTAn astonishing process, bonding rope sheath and core without affecting the rope’s suppleness. Even in the hardest conditions of use sheath slippage is suppressed.If the sheath is cut or torn, core and sheath remain bonded together.With a standard rope, if the sheath is cut by abrasion over an edge, a frequentoccurrence in work at height and in rescues, it slides and gathers over some metres.It then becomes impossible to pass this zone, either to ascend or to descend.If the problem occurs near to the end of the rope the sheath may slide off completely, and the user fall to the ground.With the UNICORE process the sheath remains in place and the user may escape, either by descent or ascent, taking all necessary precautions. He/she is not stuck without a solution on the rope.
TEMP CONCEPT
Polyamid sheath Aramid Polyamid core
EFFECT OF HIGH TEMPERATURES ON ARAMIDThe resistance of Aramid to high temperatures is best illustrated by the graph illustrating the residual strength after exposure to raised temperatures. Thus we may for example see that after 10 hours of exposure at 200C it retains 100% of its strength, or that after 1 hour at 350C it retains 90% of its strength.
Relationship between time of exposure at high temperature and residual strength of Aramid
Exposure time (Hours)
Resid
ual s
treng
th (%
)STITCHED TERMINATION EYE
CONCEPTSPerform 3EDELWEISS, at the height of its 220 years of
experience in designing products dedicated to verticality, presents its latest innovation: PERFORM 3. This new development applied to a wide range of dynamic ropesprovides the following benefits: 1. improved flexibility = increased comfort.2. improved energy absorption = increased safety.3. weight reduction = increased performance.
SupereverdryEDELWEISS was the first climbing rope maker to
apply a Supereverdry treatment to its fibres. The benefits of a Supereverdry treatment are self-evident: the ropes are lighter in case of humidity, dry quicker and don´t tend to stiffen due to freezing. The Supereverdry treatment is applied to all fibres in the core and the sheath. Comparative
tests demonstrate the superiority of this treatment over competing methods of other manufacturers with respect to durability as well as efficiency.
EverdryEDELWEISS was the first climbing rope maker to apply a Everdry treatment to its sheath. The
benefits of a Everdry treatment makes the ropes lighter in case of humidity, dry quicker and don´t tend to stiffen due to freezing. The Everdry treatment is applied only to the fibres of the sheath.
HD CoverHD Cover is a technology through which,
each cover thread is individually controlled, as opposed to standard braiding where the threads are controlled by pairs. With this High Definition braiding and although
the thickness of the sheath remains the same, the rope surface is much smoother than with a standard braiding, the rope doesn’t generate extra braking in belay systems and actions become more comfortable; another positive consequence, the wear due to abrasion is also reduced and the rope lifetime accordingly extended.
CanyonEDELWEISS CANYON ropes conception is
really different from the competition.The rope cover sheath uses a combination of the performance of Polyamide and Polyester. The benefits are better abrasion resistance and a shrinkage in water divided by 3. EDELWEISS CANYON ropes remain flexible and manageable throughout their lifetime.
5
STATIC ROPES
PERFORMANCES
Diameter 10,5 mm
Breaking strength 24 kN
Nb of falls factor 1 12
Impact force factor 0,3 5,6 kN
Static elongation 3,1 %
Sheath percentage 36,4 %
Weight 67 g/m
PERFORMANCES
Diameter 11 mm
Breaking strength 28 kN
Nb of falls factor 1 > 20
Impact force factor 0,3 4,35 kN
Static elongation 4 %
Sheath percentage 43,7 %
Weight 75 g/m
PERFORMANCES
Diameter 10 mm
Breaking strength 23 kN
Nb of falls factor 1 6
Impact force factor 0,3 5 kN
Static elongation 2,2 %
Sheath percentage 41,2 %
Weight 64 g/m
PERFORMANCES
Diameter 10,5 mm
Breaking strength 26 kN
Nb of falls factor 1 15
Impact force factor 0,3 4,6 kN
Static elongation 4,8 %
Sheath percentage 44 %
Weight 65 g/m
White
BUD 10.5 mm Versatile low stretch rope with an optimal balance price/quality. Mostly used in moderate work situations.Lengths: 50m, 100m, 200m Other lengths can be supplied on orderMaterial: PolyamidNorm: CE EN 1891 - UIAAType: ACode: CSTB105
White Black Red Blue
PROLINE 11 mmRopes from the PROLINE line benefit from a thick sheath, increasing the longevity of the rope in difficult or intensive work conditionsLengths: 50m, 100m, 200mMaterial: PolyamidNorm: CE EN 1891 - UIAAType: ACode: CSTP11
White Black
PROLINE 10 mmRopes from the PROLINE line benefit from a thick sheath, increasing the longevity of the rope in difficult or intensive work conditions.Lengths: 50m, 100m, 200m Other lengths can be supplied on orderMaterial: PolyamidNorm: CE EN 1891 - UIAAType: ACode: CSTP10
White Black Red Blue
PROLINE 10.5 mmRopes from the PROLINE line benefit from a thick sheath, increasing the longevity of the rope in difficult or intensive work conditionsStitched eye can be orderedLengths: 50m, 100m, 200m Other lengths can be supplied on orderMaterial: PolyamidNorm: CE EN 1891 - UIAAType: ACode: CSTP105
6
PROMAX UNICORE
White
PROMAX 11 mmRopes from the PROMAX line benefit from a thick sheath, increasing the longevity of the rope in difficult or intensive work conditionsStitched eye can be orderedLengths: 50m, 100m, 200m Other lengths can be supplied on orderMaterial: PolyamidNorm: CE EN 1891 - UIAAType: ACode: CSTP11U
PERFORMANCES
Diameter 11 mm
Breaking strength 28 kN
Nb of falls factor 1 > 20
Impact force factor 0,3 4,35 kN
Static elongation 4 %
Sheath percentage 43,7 %
Weight 75 g/m
White
PROMAX 10.5 mmRopes from the PROMAX line benefit from a thick sheath, increasing the longevity of the rope in difficult or intensive work conditionsStitched eye can be orderedLengths: 50m, 100m, 200m Other lengths can be supplied on order Material: PolyamidNorm: CE EN 1891 - UIAAType: ACode: CSTP105U
PERFORMANCES
Diameter 10,5 mm
Breaking strength 26 kN
Nb of falls factor 1 15
Impact force factor 0,3 4,6 kN
Static elongation 4,8 %
Sheath percentage 44 %
Weight 65 g/m
White
PROMAX 11.5 mmThe PROMAX rope offers a high breaking strength and its UNICORE treatment increases safety features in eliminating sheath slippage, even if the sheath is cut. Evacuation is then still possible.Lengths: 50m, 100m, 200mMaterial: PolyamidNorm: CE EN 1891 - UIAAType: ACode: CSTP115U
PERFORMANCES
Diameter 11,5 mm
Breaking strength 40 kN
Nb of falls factor 1 > 20
Impact force factor 0,3 5,1 kN
Static elongation 3,7 %
Sheath percentage 32 %
Weight 88 g/m
7
SPECIAL ROPES
White Yellow Red
TEMP 11 mmThe Temp rope is conceived for hostile environment, such as high temperature or chemical hasard situation. Its aramide core wistands short periods at 300°C temperature; if the polyamide melts, the aramide core still holds 800 daN. At 500° C, the rope is completely destroyed.Lengths: 50m, 100m, 200m Other lengths can be supplied on orderMaterial: Polyamid/AramidNorm: CE EN 1891 - UIAAType: ACode: CSTPA
PERFORMANCES
Diameter 11 mm
Breaking strength 25 kN
Nb of falls factor 1 15
Impact force factor 0,3 5,6 kN
Static elongation 3,1 %
Sheath percentage 42 %
Weight 79 g/m
White
OFFSHORE 11 mmOffshore 11 mm speaks for itself. Developed in cooperation with workers from the oil industry / offshore, this rope gives you great handling and maximum durability.Lengths: 50m, 100m, 200m. Other lengths can be supplied on orderMaterial: PolyamidNorm: CE EN 1891 - UIAAType: ACode: CSTOF11
PERFORMANCES
Diameter 11 mm
Breaking strength 30 kN
Nb of falls factor 1 > 20
Impact force factor 0,3 5,1 kN
Static elongation (50/150kg) 4 %
Sheath percentage 44 %
Weight 75 g/m
Green
PERFORMANCES
Diameter 10,5 mm
Breaking strength 25 kN
Nb of falls factor 1 24
Impact force factor 0,3 4,3 kN
Static elongation (50/150kg) 2 %
Sheath percentage 43 %
Weight 75 g/m
DUOTECH 10.5 mmA perfect rope for any circumstances which has been certified to both standards EN892 and EN1891, both the semi-static and the dynamic rope standards. Lengths: 50m, 100m, 200mMaterial Sheath / Core: Polyamid/Polyamid - VectranNorm: CE EN 1891/892 - UIAAType: A (EN 1891) q (EN 892)Code: CSD105
DUOTECH THE ROPE WITH TWO FACESThe DUOTECH is thus a classic semi static rope well adapted to various types of work on ropes, to rescue, and to tactical applications. In event of a very violent fall an internal vectran ‘fuse’ will rupture, and the rope then becomes dynamic, with all the security that characterizes dynamic ropes. The fuse will rupture under a force of around 3 kN. In addition, duotech resists a fall factor 1 drop holding 100 kg over a sharp metal edge of 0.75 mm radius. Ideal for delicate operations at height, pylon climbing, clock towers, rescue and fast technical intervention.
8
DYNAMIC ROPES
MAGNETIC 11 mmDesigned for the Military, Instructors, Outdoor schools and activities where extra durability and strength is required. It also appeals to other users who demand these attributes.Lengths: 50m, 100m, 200m Other lengths can be supplied on orderMaterial: PolyamidNorm: CE EN 892 - UIAAType: Code: C3A11
PERFORMANCESDiameter 11 mm
Impact force factor 1,77 8,5 kN
Nb of falls factor 1,77 15
Elongation at the first fall 35,5 %
Static elongation 9 %
Sheath slippage 0 mm
Weight 75 g/m
Red Blue
ELEMENT II 10.2 mmElement II is highly water and abrasion resistant, keeping the rope light and quick dry in wet conditions and has outstanding safety, abrasion resistance and lifetime..Lengths: 50m, 60m, 70m, 200mMaterial: PolyamidNorm: CE EN 892 - UIAAType: Code: C3P102
PERFORMANCESDiameter 10,2 mm
Impact force factor 1,77 8,3 kN
Nb of falls factor 1,77 11
Elongation at the first fall 36 %
Static elongation 9,3 %
Sheath slippage 0 mm
Weight 75 g/m
Black Khaki
Black Khaki
PERFORMANCESDiameter 9 mm
Impact force factor 1,77 5,8 kN
Nb of falls factor 1,77 15
Elongation at the first fall 35 %
Static elongation 11 %
Sheath slippage 0 mm
Weight 52 g/m
EXTREM II 9 mmThis durable half rope performs well in difficult conditions, and is suitable for professionals.Lengths: 50m, 100m, 200m Other lengths can be supplied on orderMaterial: PolyamidNorm: CE EN 892 - UIAAType: Code: CA09
9
ARBORISTS
Red
PRUSIK 10 &12 mm volcanoShort lengths of rope with sewn terminations for constructing self-locking (prusik) loops. These ropes have a 50% aramid construction intermixed with polyester filaments. Prusiks made from classic ropes have a very short life, because they glaze in use due to the effect of friction. The presence of 50% of highly thermally resistant aramid fibres in Volcano protect it against melting and thus greatly increases its lifetime. Available in 10 and 12 mm, according to the knot to be used.Lengts: 70 and 90cm Material CORE / SHEATH: Polyamid Polyester / AramidNorm: CE EN 354Code 10mm: LVOLC10Code 12mm: LVOLC12
PERFORMANCES
Diameter 10/12 mm
Breaking strength 22 kN
Red
QUERCUS 13 mm The QUERCUS rope is a very good compromise between supleness and resistance for any tree surgeon work.Material: PolyamidNorm: CE EN 1891Type: ACode: CSTP13
PERFORMANCES
Diameter 13 mm
Breaking strength 34 kN
Nb of falls factor 1 > 20
Impact force factor 0,3 5,3 kN
Static elongation 4,2 %
Sheath percentage 61 %
Weight 99 g/m
White
PERFORMANCES
Diameter 10 mm
Breaking strength 17 kN
Weight 73 g/m
Yellow
SEQUOIA 13.5 mmhe SEQUOIA tree surgeon rope is made of a typical american type tree surgeon rope sheath giving an outstanding longevity to the rope.Material: Polyester/PolyamidNorm: CE EN 1891Type: ACode: CSTP135
PERFORMANCES
Diameter 13,5 mm
Breaking strength 30 kN
Nb of falls factor 1 > 20
Impact force factor 0,3 5,1 kN
Static elongation 5 %
Sheath percentage 82 %
Weight 119 g/m
ADLINE PRUSIK 10 mmADLINE 10 mm is our special prussik rope for our tree surgeon ropes. The double braid polyester construction gives an excellent abrasion resistance.Material: polyesterCode: CSTA10
10
STANDARD NORMS
PPE EN EQUIPMENT STANDARDSAll products manufactured for sale in the EU as Personal Protective Equipment must comply to one or more relevent product standards. These are all EN pr prEN specifications, and a compliant product should be marked with the EN number, the CE code logotype and the details of the approvals agency. Below is a list of all equipment specifications relating to height safety PPE.
Work equipment standards: PPE against falls from a heightindustrial height safety equipment generally has a standard in this section, and more are being added over time. If an industrial standard exists, then products used AT WORK must comply to it.
Standard Relates to: EN341 Descender devicesEN353-1 Guided type fall arresters type 1 : rigid anchorage lineEN353-2 Guided type fall arresters type 2 : flexible anchorage line EN354
LanyardsEN355 Shock absorbersEN358 Work positioning systems EN360 Retractable fall arrestersEN361 Full body fall arrest harnesses
Standard Relates to: EN362 Connectors (carabiners, scaffold hooks, etc)EN363 Fall arrest systems (tested as a complete system)EN364 Test methods - the standard for how to test products for compliance, used
by manufacturers.EN365 General requirements for instructions for use, maintenance, periodic
examination, repair, marking and packaging - the standard defining what labels and instructions must be used on a product, and what the user is responsible for in terms of maintenance and examination.
EN813 Sit harnesses (industrial abseil harnesses)EN1891 Low stretch kernmantel rope (semi-static rope)
Mountaineering and climbing equipment standardsmany products do not yet have an industrial standard, but there is a ‘sport mountaineering’ version. These mostly come from UIAA specifications, and are no less stringent. If a product does NOT have an industrial standard, then a mountaineering compliance makes it suitable for use at work. If a product has both, the industrial standard must be used. The best example of this is connectors - a snap-lock carabiner will comply to EN12275 but fail EN362 (which needs a locking mechanism), and so it cannot be used at work.
Standard Relates to: EN564 Accessory cord, safety requirements and test methodsEN565 Tape, safety requirements and test methodsEN566 Slings, safety requirements and test methodsEN567 Rope clamps, safety requirements and test methodsEN568 Ice anchors, safety requirements and test methodsEN569 Pitons, safety requirements and test methodsEN892 Dynamic mountaineering rope, safety requirements and test methodsEN893 Crampons, safety requirements and test methodsEN958 Energy absorbing systems for via ferrata (klettersteig) climbing, safety
requirements and test methods
Standard Relates to: EN959 Rock anchors, safety requirements and test methodsEN12270 Chocks, safety requirements and test methodsEN12275 Connectors, safety requirements and test methodsEN12276 Frictional anchors, safety requirements and test methodsEN12277 Harnesses, safety requirements and test methodsEN12278 Pulleys, safety requirements and test methodsEN12492 Climber’s safety helmets, safety requirements and test methodsEN13089 Ice tools, safety requirements and test methods
General standards relating to PPE and ropes standards for equipment that may be used outside height safety, such as fibre ropes and site helmets.
Standard Relates to: EN397 Industrial safety helmets (site hats)EN696 Polyamide fibre ropes (laid and braided - not kernmantel)EN701 General service fibre ropes (natural fibre and other polymers not covered by EN696)EN795 Anchor devices - requirements and testing (industrial and climbing anchors for any purpose)EN45014 General criteria for Certificates of Conformity (instructions for manufacturers)
Rescue lifting and climbing standardsSpecialist standards for rescue equipment. These can only be used for rescuing a casualty in an emergency situa-tion, and are not acceptable for normal ‘work’ use unless they also comply to the relevent industrial standards, so a harness that complies to EN1497 but not to EN361 cannot be used for industrial fall arrest.
Standard Relates to: EN1496 Rescue lifting devices (hauling and winching devices)EN1497 Rescue harnesses (rescue nappies and emergency escape harnesses)EN1498 Rescue loops (casualty lifting strops)
11
RESCUE
Yellow
ELITE RESCUE 10.6 mmType A low-stretch rope made of a polyester-polyamid composite sheath, with Everdry treatment. The rope has a high resistance to abrasion whilst remaining supple in use. Compared to a standard polyamid sheath, the shrinkage is reduced by a factor of 3.Material sheath / core: Polyamid-Polyester/PolyamidLengths: 50m, 100m, 200m Other lengths can be supplied on orderNorm: CE EN 1891 - UIAAType: ACode: CSTER106
PERFORMANCES
Diameter 10,6 mm
Breaking strength 25 kN
Nb of falls factor 1 15
Impact force factor 0,3 5,2 kN
Static elongation (50/150kg) 4 %
Sheath percentage 37 %
Weight 71 g/m
Black
RESCUE 12 mmThe RESCUE 12 mm rope is developped for rescue interventions. It remains easy to knot even with a large diameter.Lengths: 50m, 100m, 200m Other lengths can be supplied on orderMaterial: PolyamidNorm: CE EN 1891 - UIAAType: ACode: CSTN12
PERFORMANCES
Diameter 12 mm
Breaking strength 35 kN
Nb of falls factor 1 > 20
Impact force factor 0,3 5 kN
Static elongation 4,3 %
Sheath percentage 36,8 %
Weight 88 g/m
White Orange Black
RESCUE 13 mmLow stretch rope for search and rescue activity.Lengths: 50m, 100m, 200mOther lengths can be supplied on orderMaterial: PolyamidNorm: CE EN 1891 - UIAAType: ACode: CST13
PERFORMANCES
Diameter 13 mm
Breaking strength 44 kN
Nb of falls factor 1 > 20
Impact force factor 0,3 5,4 kN
Static elongation 2,9 %
Sheath percentage 37 %
Weight 107 g/m
Yellow
CANYON 10 mmType A low-stretch rope made of a polyester-polyamid composite sheath, with Everdry treatment. The rope has a high resistance to abrasion whilst remaining supple in use. Due to its low shrinkage this rope is extremely suitable for use with waterrescue.Lengths: 50m, 100m, 200m Other lengths can be supplied on orderMaterial sheath / core: Polyamid-Polyester/PolyamidNorm: CE EN 1891 - UIAAType: ACode: CSTC10
PERFORMANCES
Diameter 10 mm
Breaking strength 23 kN
Nb of falls factor 1 6
Impact force factor 0,3 5 kN
Static elongation (50/150kg) 4,5 %
Sheath percentage 35 %
Weight 68 g/m
12
INTERVENTION - MILITARY - POLICE
Black Khaki
PROLINE 10 mmVersatile low stretch rope with an optimal balance price/quality. Mostly used in moderate work situations.Lengths: 50m, 100m, 200m Other lengths can be supplied on orderMaterial: PolyamidNorm: EN 1891 - UIAAType: ACode: CSTPN10
PERFORMANCES
Diameter 10 mm
Breaking strength 23 kN
Nb of falls factor 1 6
Impact force factor 0,3 5 kN
Static elongation 2,2 %
Sheath percentage 41,2 %
Weight 64 g/m
Black Khaki
PROLINE 10,5 mmRopes from the PROLINE line benefit from a thick sheath, increasing the longevity of the rope in difficult or intensive work conditionsStitched eye can be orderedLengths: 50m, 100m, 200m Other lengts can be supplied on orderMaterial: PolyamidNorm: CE EN 1891 - UIAAType: ACode: CSTPN105
PERFORMANCES
Diameter 10,5 mm
Breaking strength 26 kN
Nb of falls factor 1 15
Impact force factor 0,3 4,6 kN
Static elongation 4,8 %
Sheath percentage 44 %
Weight 65 g/m
Black Khaki
PROLINE 11 mmRopes from the PROLINE line benefit from a thick sheath, increasing the longevity of the rope in difficult or intensive work conditionsLengths: 50m, 100m, 200mMaterial: PolyamidNorm: CE EN 1891 - UIAAType: ACode: CSTPN11
PERFORMANCES
Diameter 11 mm
Breaking strength 28 kN
Nb of falls factor 1 > 20
Impact force factor 0,3 4,35 kN
Static elongation 4 %
Sheath percentage 43,7 %
Weight 75 g/m
Black
SPECIAL ACTION 11 mmType B semi-static ropes specially developed for rapid descent from helicopters by special forces. Their Aramid sheath does not melt, even against a descender overheated by the descent. Whereas classic ropes in polyamide or polyester have a very limited lifetime because their sheath melts, rendering the rope stiff and useless, Raider ropes permit multiple descents. Lengths: 50m, 100m, 200mMaterial sheath / core: Aramid / PolyamidNorm: CE EN 1891 - UIAAType: BCode: CSTSPAK11
PERFORMANCES
Diameter 11 mm
Breaking strength 26 kN
Nb of falls factor 1 8
Impact force factor 0,3 4,7 kN
Static elongation (50/150kg) 3,3 %
Sheath percentage 41 %
Weight 81 g/m
13
INTERVENTION - MILITARY - POLICE
Black
ACTION 11 mmThe thickness of the Aramid sheath on the Action has been reduced, and the quantity of core increased, in order to be able to certify it as type A.Lengths: 50m, 100m, 200m Other lengths can be supplied on orderMaterial sheath / core: Aramid / PolyamidNorm: CE EN 1891Type: ACode: CSTAK11
PERFORMANCES
Diameter 11 mm
Breaking strength 24 kN
Nb of falls factor 1 6
Impact force factor 0,3 5,9 kN
Static elongation (50/150kg) 3,2 %
Sheath percentage 30 %
Weight 75 g/m
Black
ELEMENT II 10.2 mmElement II is highly water and abrasion resistant, keeping the rope light and quick dry in wet conditions and has outstanding safety, abrasion resistance and lifetime..Lengths: 50m, 60m, 70m, 200mMaterial: PolyamidNorm: CE EN 892 - UIAAType: Code: C3P102
PERFORMANCES
Diameter 10,2 mm
Impact force factor 1,77 8,3 kN
Nb of falls factor 1,77 11
Elongation at the first fall 36 %
Static elongation 9,3 %
Sheath slippage 0 mm
Weight 75 g/m
Black Khaki
ROPE PROTECTORReinforced PVC rope protection wit extremely high abrasion resistance to prevent rope damages when the rop eis installed on an edge rock or potentially hazardous surface. Opens and attaches easily.Lengths: 70cm, 90cm, 120cmMaterial: Polyamid / PVCWeight: 110g - 135g - 175gCode: TEX.70, TEX.90, TEX.120
PERFORMANCES
Diameter 9 mm
Impact force factor 1,77 5,8 kN
Nb of falls factor 1,77 15
Elongation at the first fall 35 %
Static elongation 11 %
Sheath slippage 0 mm
Weight 52 g/m
TEST WITH BLOWTORCH Semi-static rope holding a mass of 100kg exposed to a temperature of 400° C (+ or- 50° C) for 15 minutes : Results: • Classic 11 mm rope : Break after around 40 sec.• Special Action 11 mm rope : Residual strength
around 1500 daN after 15 minutes.• Action 11 mm rope : residual strength around
1000 daN after 15 minutes.
EXTREM II 9 mmThis durable half rope performs well in difficult conditions, and is suitable for professionals.Lengths: 50m, 100m, 200m Other lengths can be supplied on orderMaterial: PolyamidNorm: CE EN 892 - UIAAType: Code: CA09
STATIC ROPES
Code
Name
Stan
dard
s
Type Ø
Brea
king s
treng
th (k
N)
Brea
king s
treng
th
with
figu
re of
8 kn
ot (k
N)
Stre
nght
with
sewn
term
inat
ion (
kN)
Nb of
falls
FF 1
Impa
ct fo
rce fa
ctor 0
,3 (k
N)
Stat
ic elo
ngat
ion (
%)
Shea
t slip
page
(%)
Shea
t per
cent
age (
%)
Weig
ht
Shrin
k in w
ater
(%)
Mat
erial
Treat
ment
Optio
ns
CSTB105.xx BUD 10,5mm CE EN 1891 - UIAA Type A 10,5 24 17 12 5,6 3,1 0,2 36,4 67 g/m 5 Polyamid
CSTP10.xx PROLINE 10mm CE EN 1891 - UIAA Type A 10 23 17 6 5 2,2 0 41,2 64 g/m 3 Polyamid
CSTP105.xx PROLINE 10,5mm CE EN 1891 - UIAA Type A 10,5 26 18 22 15 4,6 4,8 0,3 44 65 g/m 3,5 Polyamid Unicore / Stitched Eye
CSTP11.xx PROLINE 11mm CE EN 1891 - UIAA Type A 11 28 19 23 > 20 4,35 4 0,93 43,7 75 g/m 3 Polyamid Unicore / Stitched Eye
CSTP105U.xx PROMAX 10,5 CE EN 1891 - UIAA Type A 10,5 26 18 22 15 4,6 4,8 0 65 g/m 3,3 Polyamid Unicore / Stitched Eye
CSTP11U.xx PROMAX 11 CE EN 1891 - UIAA Type A 11 28 19 22 > 20 4,35 4 0 75 g/m 3,3 Polyamid Unicore / Stitched Eye
CSTP115.xx PROMAX 11,5mm CE EN 1891 - UIAA Type A 11,5 40 23 24 > 20 5,1 3,7 0 32 88 g/m 3,3 Polyamid Unicore
SPECIAL ROPES
CSTPA.xx TEMP 11mm CE EN 1891 - UIAA Type A 11 25 19 15 5,6 3,1 0 42 79 g/m 3,3 Polyamid / Aramid TEMP
CSD105 Duotech 10,5mm CE EN 1891/892 Type A (EN1891Simple (EN 892) 10,5 25 16,5 24 4,3 (50/150kg) 2 0,8 43 75g/m 0
Sheath: Polyamid Core: Polyamid/
Vectran
CSTOF11 Offshore 11mm CE EN 1891 - UIAA Type A 11 30 19 > 20 5,1 (50/150kg) 4 0,9 44 75 g/m 3 Polyamid Unicore / Stitched Eye
ARBO ROPESCSTA10.xx ADLINE 10mm -
Prussik 10 17 73 g/m Polyester
CSTP13.xx QUERCUS 13mm CE EN 1891 Type A 13 34 19 24 > 20 5,3 4,2 0 61 99 g/m 4,5 Polyamid Stitched Eye
CSTP135.xx SEQUOIA 13,5mm CE EN 1891 Type A 13,5 30 18 22 > 20 5,1 5 0,5 82 119 g/m 2 Polyester and Polyamid Stitched Eye
SPECIAL TACTICAL ROPESCSTAK11 Action 11mm CE EN 1891 Type A 11 24 18 6 5,9 (50/150kg)
3,2 0 30 75 g/m 0,5 Sheath: Aramid Core: polyamid
CSTSPAK11 Special Action 11mm CE EN 1891 Type B 11 26 19 8 4,7 (50/150kg) 3,3 0,6 41 81 g/m 0,5 Sheath: Aramid
Core: polyamid
SPECIAL RESCUE ROPES
CSTER106 Elite rescue 10,6mm CE EN 1891 - UIAA Type A 10,6 25 18 15 5,2 (50/150kg) 4 0 37 71g/m 1,5Sheath: Polyamid/
Polyester Core: Polyamid
Everdry
CSTN12.xx RESCUE 12mm CE EN 1891 - UIAA Type A 12 35 > 20 5 4,3 0,6 36,8 88 g/m 3,5 Polyamid
CST13.xx RESCUE 13mm CE EN 1891 - UIAA Type A 13 44 24 > 20 5,4 2,9 0,2 37 107 g/m 0,35 Polyamid
CANYON & WATER RESCUE ROPES
CSTC10.xxx Canyon 10mm CE EN 1891 - UIAA Type A 10 23 17 6 5 (50/150kg) 4,5 0 35 68g/m 1,3
Sheath: Polyamid/Polyester
Core: PolyamidEverdry
DYNAMIC ROPES
Code
Name
Stan
dard
s
Type Ø
Impa
ct fo
rce
FF 1,
77 (k
N)
Nb of
falls
FF
1,77
Elong
atio
n at fi
rst fa
ll (%)
Stat
ic elo
ngat
ion (
%)
Shea
t slip
page
(%)
Weig
ht
Mat
erial
Treat
ment
Tech
nolo
gy
C3R102 Corde AXIS II 10,2 mm CE EN 892 - UIAA 1 10,2 8,3 11 36 9,3 0 66 g/m polyamide Everdry Perform3 HD Cover
CA09 Corde EXTREM 9 mm CE EN 892 - UIAA 9 6,25 12 32 9 0 54 g/m polyamide Superever-dry (opt.)
Perform3 Sharp Edge Resistant
CA11 Corde EXTREM 11 mm CE EN 892 - UIAA q 11 9 14 32 7,6 0 80 g/m polyamide Superever-dry (opt.)
Perform3 Sharp Edge Resistant
14
ROPE SPECS
15
ACCESSORY CORDS
ARAMID CORD 5,5 mmAccessory cord with Aramid core combining high tensile strength with light weightMaterial: Aramid / PolyamidDiameter: 5,5 mmBreaking strength: 18 kNWeight: 23 g/m
CORD PRUSIK 7 mmMulti purpose Polyamide accessory cord, with great abrasion resistance thanks to a specific braiding. Its dynamic core gives an extra absorbant capacity in the safety chain.Material: PoluamidDiameter: 7 mmBreaking strength: 9,8 kNWeight: 31,9 g/mNorm: CE EN 564 - UIAA
CODE DIAMETER LENGTH WEIGHT BREAKING STRENGTH NORM
C01.200 Cord 1mm 1mm x 200m 0,65 g/m 0,35 kN
C02.60 Cord 2mm 2mm x 60m 3,6 g/m 0,8 kN
C03.60 Cord 3mm 3mm x 60m 6 g/m 1,8 kN
C04.60 Cord 4mm 4mm x 60m 10,4 g/m 3,2 kN EN354 UIAA
C05.60 Cord 5mm 5mm x 60m 18,7 g/m 5 kN EN354 UIAA
C06.60 Cord 6mm 6mm x 60m 23,1 g/m 7,2 kN EN354 UIAA
C07.60 Cord 7mm 7mm x 60m 31,9 g/m 9,8 kN EN354 UIAA
C08.60 Cord 8mm 8mm x 60m 47 g/m 12,8 kN EN354 UIAA
C09.60 Cord 9mm 9mm x 60m 53 g/m 16,2 kN
DIAMETER WEIGHT BREAKING STRENGTH NORM
Cord 5,5mm aramide 23 g/m 18 kN
Cord prussik 7mm 33,49 g/m 9,8 kN EN564 UIAA
Adline 10mm 73 g/m 17 kN
Prusik 10mm volcano 22 g/m EN354 UIAA
Prusik 12mm volcano 22 g/m EN354 UIAA
PACKED LENGTH CORDCODE DIAMETER LENGTH WEIGHT BREAKING STRENGTH NORM
C02.10 Cord 2mm 2mm x 10m 3,6 g/m 0,8 kN
C03.10 Cord 3mm 3mm x 10m 6 g/m 1,8 kN
C04.10 Cord 4mm 4mm x 10m 10,4 g/m 3,2 kN EN354 UIAA
C05.5 Cord 5mm 5mm x 5m 18,7 g/m 5 kN EN354 UIAA
C06.5 Cord 6mm 6mm x 5m 23,1 g/m 7,2 kN EN354 UIAA
C07.5 Cord 7mm 7mm x 5m 31,9 g/m 9,8 kN EN354 UIAA
CORDSMulti purpose Polyamide accessory cords, with great abrasion resistance thanks to a specific braiding. Available on roll or packet lengths
16
SLINGS
SEWN SLING 16 mmTubular webbing with high resistanceWidth: 16 mmBreaking strength: 22 kNMaterial: PolyamideLengths : 30, 60, 120, 180, 240cmDifferent lengths = different coloursNorm: EN566, EN795B, EN354Code: SA16
SEWN SLING 19 mmTubular webbing with high resistanceWidth: 19 mmBreaking strength: 22 kNMaterial: PolyamideLengths: 30, 60, 120, 180, 240cmDifferent lengths = different coloursNorm: EN566, EN795B, EN354Code: SA19
SEWN SLING 26 mmTubular webbing with high resistanceWidth: 26 mmBreaking strength: 22 kNMaterial: PolyamideLengths: 60 and 120cmDifferent lengths = different coloursNorm: EN566, EN795B, EN354Code: SA26
Our offer of slings gives you a choice for every profession and favorite use. Thanks to our experiences, we decided to certify if possible for all 3 EN standards EN566, EN795B and EN354. 16mm, 19 mm and 26 mm Tubular open slings are completed with an offer of a 18 mm flat webbing sling. In additional we created a lightweight sling that holds up to 30kN with a reinforced eye, eye-ring called. A perfect sling to have with you under any circumstances, available in 60, 80, 120, 150 cms
EYE RING 19 mmTubular webbing with high resistanceThe red inner material guarantees you an indication when the outer has been worn out –also this sling has a high strength 30 kN.
Width: 19 mmBreaking strength: 30 kNMaterial: PolyamideLengths : 60, 80, 120, 150cmDifferent lengths = different eye coloursNorm: EN795B, EN354Code: SO19
DYNEEMA 10 mmLight weight sewn slings made of flat 10mm Dyneema / Polyamide tapeBreaking strength: 22 kNNorm: EN795B, EN354, EN566 - UIAA
LENGTH WEIGHT CODE30 cm 11 g SAD10.30
60cm 20 g SAD10.60
120cm 38 g SAD10.120
180cm 56 g SAD10.180
240cm 73,5 g SAD10.240
FLAT SLING 18 mmLight weight sewn slings made of flat 18mm Polyamide tapeBreaking strength: 22 kNNorm: EN795B, EN354, EN566 - UIAA
LENGTH WEIGHT CODE30 cm 26 g SA18.30
60cm 48 g SA18.60
120cm 92 g SA18.120
180cm 137 g SA18.180
240cm 181 g SA18.240
IMAGE: OLOF FREDRIKZE
17
SLINGS
CONNECTORS & TRAX
18
ABSORB SHOCK ABSORBERShock absorber. Very small, flexible and compact fall absorber. The Absorb in combination with Trax creates an unique fall absorption system.Weight: 150gBasic lenght: 0,18mMax. Length after the fall (fall factor 2): 1,4mImpact force: 5,5kNNorm: EN 355Code: SHABS
TRAX DYNAMIC LANYARDTrax – Dynamic lanyard and anchor device for working at height.The dynamic lanyard fulfills for the lengths of 60, 80, 120 and 150 cms the EN standards 795B and 354. Where for the lengths 200 and 350 cms, 5 and 10 meters only are certified EN795B.Both ends of the dynamic lanyard are with stitched eye, and the stitching has a plastic cover.These lanyards improve your safety.This product is NOT a fall absorber.
Trax dynamic lanyard combined with Absorber
C110
Double Lanyard
LanyardC23
C60
TYPE CODE
Trax 60cm LDI.060
Trax 80cm LDI.080
Trax 120cm LDI.120
Trax 150cm LDI.150
Trax 80cm + C60 connector LDI.080_c60
Trax 120cm + C23 connector LDI.120_c23
Trax 120cm + C60 connector LDI.120_c60
Trax 150cm + C23 connector LDI.150_c23
Trax 150cm + C60 connector LDI.150_c60
Norm: EN 795B
Trax 200cm LDI.200
Trax 200cm + C60 connector LDI.200_c60
Trax 350cm LDI.350
Trax 350cm + C60 connector LDI.350_c60
Swift 5m LDL.05
Swift 5m + C60 connector LDL.05_c60
Swift 10m LDL.10
Swift 10m + C23 connector LDL.10_c23
Swift 10m + C60 connector LDL.10_c60
Swift 10m + C 110 connector LDL.10_c110
Trax V 30/85cm LDV.085
Trax V 100/100cm LDV.100
Trax V 150/150cm LDV.150
Other combination on request
TRAX & ABSORB
19
TYPE CODEABSORB (EN355) SHABS
Lanyard ABSORB 60cm SHAB-I60
Lanyard ABSORB 80cm SHAB-I80
Lanyard ABSORB 120cm SHAB-I120
Lanyard ABSORB 150cm SHAB-I150
Lanyard ABSORB 80cm + C23 connector SHAB-I80_C23
Lanyard ABSORB 80cm + C60 connector SHAB-I80_C60
Lanyard ABSORB 120cm + C23 connector SHAB-I120_C23
Lanyard ABSORB 120cm + C60 connector SHAB-I120_C60
Lanyard ABSORB 150cm + C23 connector SHAB-I150_C23
Lanyard ABSORB 150cm + C60 connector SHAB-I150_C60
Lanyard ABSORB 150cm + C110 connector SHAB-I150_C110
Absorb
Double Lanyard
LanyardC23
C60
C110
TYPE CODEDouble lanyard V ABSORB 100cm SHAB-V100
Double lanyard V ABSORB 100cm + C23 connector SHAB-V100_C23
Double lanyard V ABSORB 100cm + C60 connector SHAB-V100_C60
Double lanyard V ABSORB 150cm SHAB-V150
Double lanyard V ABSORB 150cm + C23 connector SHAB-V150_C23
Double lanyard V ABSORB 150cm + C60 connector SHAB-V150_C60
Double lanyard V ABSORB 150cm + C110 connector SHAB-V150_C110
Lanyards equipped with the Shock Absorber. Available in seven versions with different connectors and lengths.
20
CARABINERS
LOCK LIGHT ALLOYEyelet connector with triple action opening for maximum security in sportive and professional activities. Catch free closure.Type: D / TLength: 140 mmWidth: 79 mmEyelet: 22 mmWeight: 102 gMajor axis strength: 25 kNMinor axis strength: 8 kNOpen strength: 8 kNNorm: CE EN 12275 / 362 - UIAACode : MLOK
JET LIGHT ALLOYScrew gate carabiner, catch free closure and light weight ergonomic body.Type: HLength: 107 mmWidth: 66 mmWeight: 65 gMajor axis strength: 28 kNMinor axis strength: 8 kNOpen strength: 7 kNNorm: CE EN 12275 - UIAACode: MJET
TOP D LIGHT ALLOYLight weight carabiner with ergonomic shape. Catch free closure, straight gate, ideal for draws on anchor point side.Type: BLength: 96 mmWidth: 59 mmWeight: 44 gMajor axis strength: 24 kNMinor axis strength: 8 kNOpen strength: 7 kNNorm: CE EN 12275 - UIAACode: MTOPD
PERFORMANCE LIGHT ALLOYEyelet connector with triple action opening for maximum security in sportive and professional activities. Catch free closure.Type: K / TLength: 138 mmWidth: 70 mmEyelet D: 24 mmWeight: 134 gMajor axis strength: 28 kNMinor axis strength: 10 kNOpen strength: 10 kNNorm: CE EN 12275 / 362 - UIAACode: MPERFORMANCE
SONIC LIGHT ALLOYVery light weight carabiner with thin body. Ideal for draws on the rope side. The wire gate avoids opening by inertia.Type: BLength: 95 mmWidth: 60 mmWeight: 38 gMajor axis strength: 24 kNMinor axis strength: 8 kNOpen strength: 7 kNNorm: CE EN 12275 - UIAACode: MSONIC
TOP C LIGHT ALLOYLight weight carabiner with ergonomic shape. Catch free closure, straight gate, ideal for draws on anchor point side.Type: BLength: 96 mmWidth: 59 mmWeight: 44 gMajor axis strength: 24 kNMinor axis strength: 8 kNOpen strength: 7 kNNorm: CE EN 12275 - UIAACode: MTOPC
LINK LIGHT ALLOYScrew gate carabiner, catch free closure and lightweight ergonomic body.Type: HLength: 105 mmWidth: 66 mmWeight: 66 gMajor axis strength: 28 kNMinor axis strength: 8 kNOpen strength: 8 kNNorm: CE EN 12275 - UIAACode: MLINK
21
CARABINERS
GUARD LIGHT ALLOYScrew gate HMS carabiner with catch free closure.Type: H / BLength: 120 mmWidth: 76 mmWeight: 86 gMajor axis strength: 24 kNMinor axis strength: 8 kNOpen strength: 8 kNNorm: CE EN 12275 / 362 - UIAACode : MGUARD
GUARD O LIGHT ALLOYScrew gate oval carabinerwith catch free closure.Type: X / BLength: 110 mmWidth: 61 mmWeight: 74 gMajor axis strength: 21 kNMinor axis strength: 8 kNOpen strength: 8 kNNorm: CE EN 12275 / 362 - UIAACode : MGARDO
Z102 STEELSteel carabiner – twist gateType: BLength: 107 mmWidth: 57 mmWeight: 197 gMajor axis strength: 30 kNMinor axis strength: 8 kNOpen strength: 8 kNNorm: EN 362Code: MZ102
Z500 STEELSteel carabiner – twist gateType: BLength: 110 mmWidth: 68 mmWeight: 251 gMajor axis strength: 52 kNMinor axis strength: 16 kNOpen strength: 18 kNNorm: EN 362Code: MZ500
GUARD 3 LIGHT ALLOYTriple action opening HMS carabiner with catch free closure.Type: H / BLength: 120 mmWidth: 76 mmWeight: 100 gMajor axis strength: 24 kNMinor axis strength: 8 kNOpen strength: 8 kNNorm: CE EN 12275 / 362 - UIAACode: MGUARD3
Z103 STEELSteel carabiner – triple action gateType: BLength: 107 mmWidth: 57 mmWeight: 198 gMajor axis strength: 30 kNMinor axis strength: 8 kNOpen strength: 8 kNNorm: EN 362Code: MZ103
Z503 STEELSteel carabiner – triple action gateType: BLength: 110 mmWidth: 68 mmWeight: 251 gMajor axis strength: 52 kNMinor axis strength: 16 kNOpen strength: 18 kNNorm: EN 362Code: MZ503
Z101 STEELSteel carabiner – screw gateType: BLength: 107 mmWidth: 57 mmWeight: 179 gMajor axis strength: 30 kNMinor axis strength: 8 kNOpen strength: 8 kNNorm: EN 362Code: MZ101
MAILLONS
22
MAILLON OVAL 8 STEEL - ZINC PLATED OR BLACKThe original oval shape was developed on the principle of a chain link fitted with manual nut opening. This shape reflects the spirit of Maillon Rapide quick links connectors.Type: QLength: 77 mmWidth: 33,5 mmWeight: 77 gBreaking strength: 35 kNWorking Load Limit: 7 kNNorm: CE - EN362 - EN12275Code: MPEGO.08 - MPEGO.08B
MAILLON DELTA 8 STEEL - ZINC PLATED OR BLACKDelta shape: developed after the ever-increasing development of webbing-fitted systems; perfect for webbing uphold onto its lower flat part.Type: Q Length: 56Width: 73mmOpening: 10mmWeight: 88 gBreaking strength: 27 kNWorking Load Limit: 5 kNNorm: CE - EN362 - EN12275Code: MPEGD.08 - MPEGD.08B
MAILLON HALF MOON 10 STEEL - ZINC PLATED OR BLACKHalf moon shape: suitable for the junction of 2 connecting points on a harness.Type: Q Length: 86mmWidth: 66mmOpening: 10mmWeight: 153 gBreaking strength: 45 kNWorking Load Limit: 9 kNNorm: CE - EN362 - EN12275Code: MPEGHM.10 - MPEGHM.10B
MAILLON OVAL 10 STEEL - ZINC PLATED OR BLACKThe original oval shape was developed on the principle of a chain link fitted with manual nut opening. This shape reflects the spirit of Maillon Rapide quick links connectors.Type Q Length: 89Width: 40,5mmOpening 12mmWight: 137 gBreaking strength: 55 kNWorking Load Limit: 11 kNNorm: CE - EN362 - EN12275Code: MPEGO.10 - MPEGO.10B
MAILLON DELTA 10 STEEL - ZINC PLATED OR BLACKDelta shape: developed after the ever-increasing development of webbing-fitted systems; perfect for webbing uphold onto its lower flat part.Type: Q Length: 87mmWidth: 66mmOpening: 12mmWeight: 153 gBreaking strength: 45 kNWorking Load Limit: 9 kNNorm: CE - EN362 - EN12275Code: MPEGD.10 - MPEGD.10B
23
WORK AT HEIGHT
MAILLON OVAL 8 INOX STAINLESS STEEL SS316The original oval shape was developed on the principle of a chain link fitted with manual nut opening. This shape reflects the spirit of Maillon Rapide quick links connectors.Type: QLength: 33,5 mmWidth: 74 mmWeight: 79 gBreaking strength: 55 kNWorking Load Limit: 11 kNNorm: CE - EN362 - EN12275Code: MPEGO.08S
MAILLON DELTA 8 INOX STAINLESS STEEL SS316Delta shape: developed after the ever-increasing development of webbing-fitted systems; perfect for webbing uphold onto its lower flat part.Type: QLength: 56Width: 73mmOpening: 10mmWeight: 88 gBreaking strength: 35 kNWorking Load Limit: 7 kNNorm: CECode: MPEGD.08SS
MAILLON OVAL 10 INOX STAINLESS STEEL SS316The original oval shape was developed on the principle of a chain link fitted with manual nut opening. This shape reflects the spirit of Maillon Rapide quick links connectors.Type: QLength: 89Width: 40,5mmOpening: 12mmWeight: 141 gBreaking strength: 90 kNWorking Load Limit: 18 kNNorm: CE - EN362 - EN12275Code: MPEGO.10SS
MAILLON DELTA 10 INOX STAINLESS STEEL SS316Delta shape: developed after the ever-increasing development of webbing-fitted systems; perfect for webbing uphold onto its lower flat part.Type: QLength: 87mmWidth: 66mmOpening: 12mmWeight: 156 gBreaking strength: 60 kNWorking Load Limit: 12 kNNorm: CECode: MPEGD.10SS
24
CONNECTORS
QUICK LINK STEELOval 8mm diameter quick link with screw gate. Type: QLength: 76 mmWidth: 25 mmØ: 8 mmWeight: 76 gBreaking Strength: 25 kNNorm: CE EN 12275 - UIAACode: MRAPID8
C60 LIGHT ALLOYDouble gate automatic connector with wide 60 mm opening for scaffolding and other metallic structure.Length: 236 mmWidth: 114 mmEyelet: 22 mmBreaking strength: 22 kNWeight: 475 gNorm: EN 12278 - UIAACode: MC60
C23 STEELDouble gate automatic connector with 18 mm opening.Length: 136 mmWidth: 60 mmEyelet: 22 mmBreaking strength: 22 kNWeight: 230 gNorm: CE EN 362Code: MC23
C110 LIGHT ALLOYDouble gate automatic connector with wide 110 mm opening for scaffolding and other metallic structureLength: 358 mmWidth: 165 mmEyelet: 27 mmBreaking strength: 25 kNWeight: 920 gNorm: EN 12278 - UIAACode: MC110
25
PULLEYS
PULLEY 213 R LIGHT ALLOYDouble pulley with water proof ball bearings. Can be used on rope up to maximum 13 mm diameter and metal cable with max. 12 mm diameter.Breaking strenght: 25 kNWeight: 291 gNorm: CE EN 12278Code: MP213R
SWIVEL LIGHT ALLOYSwivel avoids twisting in a lanyard or rope system.Length: 115mmWidth: 55mmBreaking strength: 30kNWeight: 162 gNorm: CE EN 354 - UIAACode: MSW
SWIVEL SWR LIGHT ALLOYCompact and light forged aluminium eye to eye swivel with ball bearings, tor smooth rotation even under load. Accept 2 carabiners in each eye.Length: 83 mmWidth: 39 mmBreaking strength: 22 kNWorking Load Limit: 4kNWeight: 88 gNorm: CE EN354Code: MSWR
TRAFIC 116 LIGHT ALLOYLightweight Pulley to be used with rope max diameter 16 mm - can be used with Prusik friction cord. Maximum breaking strength: 30 kN. Weight: 246 g Norm: EN 12278Code: MP116
TRAFIC 111 LIGHT ALLOYLightweight Pulley to be used with rope max diameter 11 mm - can be used with Prusik friction cord. Maximum breaking strength: 20 kN.Weight: 121 g Norm: EN 12278Code: MP111
TRAFIC 216 LIGHT ALLOYLightweight Pulley with bottom attachment point, to be used with rope max diameter 16 mm – can be used with Prusik friction cord. Maximum breaking strength: 30 kN. Weight: 423 g Norm: EN 12278Code: MP216
ROTOR 113 R LIGHT ALLOYPulley with ballbearing to be used up to rope 13mm diameter. Small, lightweight mainly used for hauling systems.NORM: EN 12278 - UIAACode: MP113R
RIGGING PLATES
HERTZ M LIGHT ALLOYThe HERTZ M rigging plate has a smooth design ideal tor textile slings. Equiped with one main connection point and seven 20 mm additional holes, it can receive industrial connectors with big nuts such as triple action gate. lt's a perfect compact device for complex rigging situations.Height: 172 mmWidth: 83 mmWeight: 188 gMaximum Breaking Strength: 45 kNWorking Load Limit: 9 kNNorm: CECode: MHERTZ.M
HERTZ XS LIGHT ALLOYThe HERTZ XS rigging plate is very small and light (36g), the smooth design will not damage textile slings. Equiped with one main connec-tion point and three 15 mm additional holes he's mostly dedicated to difficult situations with limited space.Height: 61 mmWidth: 62 mmWeight: 36 gMaximum Strength: 36 kNWorking Load Limit: 7 kNNorm: CECode: MHERTZ.XS
HERTZ S LIGHT ALLOYThe HERTZ S rigging plate has a smooth design ideal for textile slings. Equiped with one main connection point and three 20mm additional holes, it can receive industrial connectors with big nuts such as triple action gate.Height: 81 mmWidth: 83 mmWeight: 92 gMaximum Breaking Strength: 45 kNWorking Load Limit: 9 kNNorm: CECODE: MHERTZ.S
26
BELAY AND SELF BRAKING DEVICES
PATROL LIGHT ALLOYDescender with double locking and anti-panic system.self-breaking in case of loss of descent control. Sensitive handle enables smooth descent. Also suitable for works at a height and for emergency self-evacuation. Rope can be inserted into device without unclipping it. Norm: EN 341 = Ø rope 11 mmNorm: EN 12841-C = Ø rope 10 - 12mm, 200kg
Ø rope 9mm, 130kgWeight: 340 gCode: MPATROL
SWINGDevice for fall arrester. For 11 mm textile ropes. The SWING can be open to be fitted to the rope at any point, it can be used as a fall arrester or as a work positionning device by using the parking cam. It can be released when loaded. Parking cam for blocking.Norm: EN 353-2 = Ø rope 11 mmCode: MSWING
D8 LIGHT ALLOYFigure of eight belay device with ears allowing a locking key. Height: 108 mmWidth: 80 mmWeight: 92 gBreaking strength: 25 kN Code: MD8
S8 LIGHT ALLOYVersatile medium size figure of eight belay device. Height: 132 mmWidth: 74 mmWeight: 102 gBreaking strength: 25 kNCode: MS8
27
• Maximum working load of 130 kg with 9 mm rope, and up to 200 kg with ropes from 10 to 12 mm.
• Anti-panic function with 2 blocking positions.• The maximum authorised speed of descent is 2 m/s.• Useable on a wide spread of rope diametres from 9 to 12 mm (EN12841-C).• Long control lever for a more progressive feel.• Rope can be inserted into device without unclipping it.• Unique serial number.
BLITZFront block headlamp with directional adjustment and rear battery pack. Adjustable elastic cord.
This all-weather headlamp combines an incredible powerful output and a real water-proof construction (IPX7: protection against immersion during 30 minutes at a depth of 1 meter). The large range of brightness mode and the choice between wide and zoom beam will suit all conditions. A battery gauge alerts from being short on power. Ideal for all work and rescue activities. Battery included.
Water protection: IPX7Battery type: 2xAA + battery gaugeWeight: 175gNorm: CE - RoHS
Output: 190 lumensWide : 115° 15mZoom : 60° 150mTotal runtime: 132h (Eco Mode)
Zoom-standardZoom-distanceZoom-ecoWide-standardWide-powerStrobe
m o b i l e l i g h t i n g
VISI N
28
INDUSTRIAL TECHNOLOGY
VISION
LUCYLantern / FlashlightWhen retracted(138mm) this lantern becomes a precise flashlight, a 2 in 1 product just perfect for your clear work.This lantern is stable, compact (196mm), can be hung with its suspension half loop. A frosted globe associated to a powerful LED will provide an extremely comfortable ambient light. The brightness can easily be adjusted with a single switch. Without batteries.
Water protection: IPX4Battery type: 4xAAWeight: 240gNorm: CE - RoHS
POLARISThis very compact front-block headlamp offers simplicity and power for only 68g. It also offers a very good protection against splashing. It is the best choice for basic work and rescue activities. Battery included.
Water protection: IPX6Battery type: 2xAAAWeight: 68gNorm: CE - RoHS
Output: 28 lumensWide : 90° 27mTotal runtime: 50 h (Eco mode)
Wide-standardWide-powerWide-ecoStrobe
Output: 190 lumensLantern : 360° 5mFlashlight : 50° 150mTotal Runtime: 230h (Eco Mode)
Lantern or Flashlight position1 adjustable modefrom Eco to Full power
SIRIUSVersatile headlamp with compact front-block design, featuring a powerful central LED, it offers many brightness modes (Wide - Zoom) usable via a single button. It will be the right choice for work and rescue activities in bad conditions, thanks to the water resistant construction IPX6: protected against powerful jets and splashing. Battery included.
Water protection: IPX6Battery type: 3xAAAWeight: 94gNorm: CE - RoHS
Output: 120 lumensWide : 90° 6mZoom : 60° 120mTotal runtime: 240h (Eco Mode)
Zoom-standardZoom-distanceZoom-ecoWide-standardWide-lowStrobe
29
30
INDUSTRIAL TECHNOLOGY
Padded and ergonomic shoulder straps to reduce chafing.
Narrow padding of shoulders.
HERCULES EVO SIT
Special loops for your extra equipment.
Upper front attachment point EN361.
The lower front attachment point EN 813 distributes the weight more evenly between the waistbelt and the leg loops. Excellent movement is granted.
Lateral point EN 358 at GO position.Extra-protected point even for additional connector or PPE gear. Increases comfort during abseiling.
Slim strap with well done made padding. As yours experiences requires.
Elastic straps for your free movement.
Lateral point EN 358 at LOCK position.
New modern padding, designed for all professionals. Allows grate movement and support.
31
HARNESSES
HERCULES ACTION SITMade from highly resistant materialsPadding is reinforced with polyethylene plateRevolving side attachment points 180° according to EN 358Formed and braided gear loopsSupporting lots for your equipment with a guarantee capacity of 10kgAdditional loop for your equipment with a guarantee capacity of 5kgStreak reflex at waist beltTextile loop for EN 813 attachment point is extra protected4 x speed bucklesEasily to combine with Hercules shouldersIn the design of the Hercules Action safe Cobra buckles are used to quickly open and close the harness in any situation where this is needed. This gives a guarantee to adjust it quickly to your body.Norm: EN 813, EN 358 CE 0120S: Height: 155-175cm Waist: 70-90cm Legs: 55-65cmM-L: Height: 170-185cm Waist: 80-105cm Legs: 55-65cmXL: Height: 180-210cm Waist: 90-130cm Legs: 60-75cmCode: HER.AK.SIT
HERCULES EVO SITMade from highly resistant materialsPadding is reinforced with polyethylene plateRevolving side attachment points 180° according to EN 358Formed and braided gear loopsSupporting lots for your equipment with a guaranteed capacity of 10kgAdditional loop for your equipment with a guaranteed capacity of 5kgStreak reflex at waist beltTextile loop for EN 813 attachment point is extra protected4 x light bucklesEasily to combine with Hercules shouldersNorm: EN 813, EN 358 CE 0120S: Height: 155-175cm Waist: 70-90cm Legs: 55-65cmM-L: Height: 170-185cm Waist: 80-105cm Legs: 55-65cmXL: Height: 180-210cm Waist: 90-130cm Legs: 60-75cmCode: HEREVO.SIT
32
HARNESSES
HERCULES EVO SHOULDERMade from highly resistant materialsAnatomic shoulders perfectly fit to usersFront and back attachment points EN 361 made from steelLoop for connector (eliminating risk of bypass) All very stressed places are extra protectedEasily to combine with Hercules Evo sit and Hercules action sitNorm: EN 361 together with sit harness CE 0120S: Height: 155-175cmM-L: Height: 170-185cmXL: Height: 180-210cmCode: HEREVO.SHO
Available in black
HERCULES EVO FULL BODYCombination of sit and shouldersNorm: EN 813, EN 358, EN 361 CE 0120S : Height: 155-175cm Waist: 70-90cm Legs: 55-65cmM-L: Height: 170-185cm Waist: 80-105cm Legs: 55-65cmXL : Height: 180-210cm Waist: 90-130cm Legs: 60-75cmCode: HEREVO.FUL
33
HARNESSES
VULCAINFront attachment point EN 361.Easy to wear.Different colours of leg straps and shoulders.Safe, light and quick buckle.Holds body at the proper position.Unlimited freedom of movement.Norm: EN 361 CE 0120Sizes: UniWeight: 780gCode: HVUL
VULCAIN JACKIncluding functional jackFront attachment point EN 361Easy to wearDifferent colours of leg straps and shouldersSafe, light and quick buckleHolds body at the proper positionUnlimited freedom of movementNorm: EN 361 CE 0120Sizes: UniCode: HVUL.J
ROPE COURSES
2/3
1/3
0
3/3
EN 361=2/3EN 813
EXPLORER IIRope Course –adventure parks Harness – the front attachment point is a metal ring, avoiding this way that users will click in a wrong way. Totally USER FRIENDLY, this point can be used as EN361 but also be moved to position of EN813. Easy to put on and off as for each leg loop there is a different color of webbing used. The harness gives an unlimited freedom of movement during activities.Explorer comes in 2 sizes, one for smaller people and a bigger version for taller users.2 gear loops.Front fulfilling to EN813, Front attachment point can also placed that it functions as EN361Type: CMaterial: Polyamid / PolyesterNorm: CE EN 12277- UIAA / CE EN 361-813Code: HEXP.II
CHALLENGE HG HG: Adjustable unpadded harness with three auto lockingbuckles and two sliding gear loops. A single visible attachment point, closing of the waist on the right side, for easy checking by the instructor in rope courses. Ideal for via ferrata and activity centres.Material: PolyamidNorm: CE EN 12277 - UIAAType: CCode: HCCCode: HCC.XL
34
CHALLENGE HGAdjustable unpadded harness with three auto locking buckles and two sliding gear loops. A single visible attachment point, closing of the waist on the right side, lor easy checking by the instructor in rope courses. ldeal tor via !errata and activity centres.Size: XL XS-LType: C CWaist: 60 -117cm 60-102cmLegs: 90cm max. 75cm max.Weight: 450 g 400Norm: CE EN 12277 - UIAACode: HCC.3 /XL HCC.3XL
ROPE COURSES
ESCAPE II One size fits all fully adjustable harness with auto locking buckles. 2 gear loops, a single well identified tying in point. Versatile and comfortable thanks to its padding, it is suitable for any vertical activity, Type C Waist: 55 - 110 cmLegs: 40 - 70 cmWeight: 415 gNorm: CE EN 12277 - UIAACode: HESC2
MYGALECuissard entièrement réglable par 3 boucles faciles à manipuler.1 porte-matériel, un seul point d’encordement parfaitement identifiable même par les novices.C’est un harnais idéal pour les collectivités, l’initiation à l’escalade ou les activités verticales telles que via ferrata et parcours acrobatiques en hauteur. Type C Size Universal Waist: max. 120cm Legs: max. 80cm Weight: 400 gNorm: UIAA CE EN 12277 Code: HMY
35
DELTA RESCUERescue harness and sling.Big textile attachment points.Back attachment point.Norm: EN 1497, EN 1498 CE 0120Size: UniCode: HR.DELT
IMAGE: OLOF FREDRIKZE
36
INDUSTRIAL TECHNOLOGY
HELMETS
37
VITAL IIInnovative helmet design, low-profile and light, comfortable and well ventilated with 10 vents. Durable ABS injection molded shell with EPS inner foam. Fit for all climbing activities. Size-fitting via wheel adjuster. Headlamp clips to secure your lighting.
Size: 51 > 62cmWeight: 350 gNorm: CE EN 12492Code: KVIT.2
VITAL II WORKInnovative helmet design, low-profile and light, comfortable and well ventilated with 10 vents. Durable ABS injection molded shell with EPS inner foam. Size-fitting via wheel adjuster. Headlamp clips to secure your lighting. Size: 51 > 62cmWeight: 350 gNorm: CE EN 397Code: KVIT.2
VENTURIInnovative helmet design, light in weight, comfortable and extremely well ventilated. Durable polycarbonate shell with EPS inner foam. Fit for all climbing activities. Size-fitting via wheel adjuster. Headlamp clips to secure your lighting.
Size: 51 > 62cmWeight: 285 gNorm: CE EN 12492Code: KVENT
White Green Red
White Orange
38
PACKS
DUFFLE 090Rugged construction tarpaulin duffle bag. Large 90 liters capacity with big identification win-dow, pocket on top and internal mesh pockets. Also equipped with four compression straps, haul handles on ends and removable shoulder straps. This bag is designed for long distance trip all over the world.
Size: 90 litersWeight: 2100 gMaterial: PVC and PolyamideCode: SAC D90
T 45 BAGHeavy duty 451 transport bag made of strong PVC with welded construction. This bag features a reinforced base with 3 base holes to let out water, 2 comfortable shoulder straps and fastopening with adjustable cord closure. Ergo-nomically shaped, adjustable shoulder straps. Strong side handle for easy transport. External hanging loop / handle. One zippered pocket under the cover and one front zippered pocket.
Size: 45 litersWeight: 1250gMaterial: PVC and PolyamideCode: SAC T45
39
ROPE GEAR & PROMO GEAR
WORK TRESCUE T
BLACK CAP EDELWEISS TUMBLER
100% cotton, comfort fit and climbing spirit ! Tee shirt available in assorted colours and designs.Material: Cotton 190 g /m2Sizes: XS > XLCode Work T: T.09Code Rescue T: T.08
Logo embroidered Cap / one size fits allCode: P.CAP13
Whatever activity you are doing a cup hot coffee or chocolate is always welcome . For this purpose we are able to supply you with the Edelweiss Tumbler, 280 ml standard red Edelweiss color.Code: PGOB.1
ROPE CLEANER
THERMO CUTTER
ROPE BRUSH
Our own development for cleaning ropes after action. The brush adapts easy to different rope diameters. Fix the brush on the rope, then slide the brush along the rope while holding the rope under water.Code: D.ROBRUSH
A none-aggressive detergent developed for easy cleaning of polyamide products / ropes or harnesses. However the water temperature used should be less than 30 Celcius.Code: D.ROCLEAN
This Thermocutter features an electrically heated blade designed for cutting all ropes easily and effortlessly. Heats up instantly.Code: D.THCUT
PERFECT GLOVE
Leather glove with palmreinforcement for via ferrataand other vertical activities.Sizes: S-M-LMaterial: 70% cowhide leather, 15% cow suede leather and 15% nylon stretch fabricCode: GL01
Edelweiss Professional2, boulevard Pierre Joannon42400 SAINT-CHAMOND - FRANCETél +33 (0)4 77 29 22 80 - Fax +33 (0)4 77 31 81 [email protected]
www.edelweiss-pro.comThe data given in this catalogue are guidelines for assessing the quality of our products. More detailed specifications currently applicable are available on request. We reserve the right to make changes called for by technical development as well as changes in colour. Printed- and typesetting errors reserved.
EDELWEISS® EVERDRY®, PERDUR® are trademarks for which the EDELWEISS S.A. has registered rights in one or several countries of the world.