+ All Categories
Home > Documents > Edge banding and combination machines K 520 Optimat ... · The machines of the series K 520 Optimat...

Edge banding and combination machines K 520 Optimat ... · The machines of the series K 520 Optimat...

Date post: 24-Mar-2020
Category:
Upload: others
View: 8 times
Download: 0 times
Share this document with a friend
8
Edge banding and combination machines K 520 Optimat – Compact series production
Transcript

Edge banding and combination machines K 520 Optimat – Compact series production

KAL526/M2/C

KAL525/M1/C

KAL526/C

1

2

3

02 HOMAG K 520 Optimat KAL

K 520 Optimat – all inclusive as standardThe classical application for double-sided machines and machine lines: medium to large-scale series production. The machines of the series K 520 Optimat are compact and sturdy and allow automatic resetting either for one profile and chamfer (with the Future package) or for two profiles and chamfer (with the Performance package). Choose between a KAL 520 Optimat, which processes pre-sized workpieces in

unfinished fixed dimensions or the KFL 520 Optimat, which is capable of component sizing, edging and finish processing. The fix basic equipment can be expanded. Additional units can be mounted on the free spaces. We are YOUR SOLUTION

optional

optional

optional

Overall length

Overall length

Overall length

KAL 520 Optimat with Jointing trimming

5040607030

KFL526/M2/C

KFL525/M1/C

5040607030

KFL526/C

4

5

6

03HOMAG K 520 Optimat KFL

optional

optional

optional

Overall length

Overall length

Overall length

KFL 520 Optimat with Compact double hogger

1 KAL 525/M1/C Optimat as the first machine in a line

2 KAL 526/M2/C Optimat as the second machine in a

line

3 KAL 526/C Optimat as a standalone machine for

longitudinal and cross processing

4 KFL 525/M1/C Optimat as the first machine in a line

5 KFL 526/M2/C Optimat as the second machine in a

line

6 KFL 526/C Optimat as a standalone machine for

longitudinal and cross processing

04 HOMAG K 520 Optimat Units

Jointing trimming (KAL)

This unit permits a high level of processing

precision, is extremely hardwearing and is

also designed to ensure an above-average

service life. The tool diameter is 125 mm.

Snipping unit PK25

For snipping the edge overhang at the

leading and trailing workpiece edge with

stationary snipping stop to protect sensitive

workpieces from damage.

Compact double hogger KD11 (KFL)

High-performance 6.6 – 11 kW motors

permit the safe, splinter-free hogging of

greater processing allowances. The KD11

unit performs sizing operations in the

longitudinal and transverse direction with

three motors. The tool diameter is up to

250 mm.

Units for the K 520 OptimatThe units for the K 520 Optimat are taken from the proven range of modular units of HOMAG. Rough trimming units and grooving units can be mounted on the existing free

spaces. In addition to this, on the KFL an additional trimming unit can be mounted after the compact double hogger.

05HOMAG K 520 Optimat Units

Profile trimming unit FF32

For rounding top and bottom edges on

the leading and trailing workpiece edges.

By dividing the cut over four motors, each

corner can be processed in synchronous

rotation, so reducing the risk of splintering

even with veneer.

Trimming unit PF20

For trimming edge chamfers or radii.

Options: Stepless or pneumatic adjusting

devices for the trimming motor. Trimming

motor exchange using exchange units.

Finish processing FA21

Comprising a glue joint scraper for disposal

of glue residues at the top and bottom of

plastic edges and a buffing unit.

1

2

06 HOMAG K 520 Optimat Application samples

Application samplesMachines of the series K 520 Optimat are ideal for the use in machine lines – e.g. two machines K 520 Optimat in production lines or as standalone machine in a short machine line.

In production lines for medium to large-scale series the longitudinal and transverse processing of workpieces is carried out in a single pass. Short machine lines are suitable for medium capacities. The workpieces are processed in two passes first lengthwise then crosswise.

TBH TSHTDL 310 TDL 510

Machine 1 Machine 2

Standalone machine

1 Machine line with rotary stations – longitudinal to

transverse and transverse to longitudinal

2 Short line with rotary stations – longitudinal to

transverse and transverse to longitudinal

07HOMAG K 520 Optimat Technical data

OVERALL LENGTH KAL 520 OPTIMAT

Line execution

Machine 1

Line execution

Machine 2

Standalone machine

KAL 525/M1/C (mm) 7,650 - -

KAL 526/M2/C (mm) - 11,880 -

KAL 526/C (mm) - 11,880 11,650

OVERALL LENGTH KFL 520 OPTIMAT

Line execution

Machine 1

Line execution

Machine 2

Standalone machine

KFL 525/M1/C (mm) 7,650 - -

KFL 526/M2/C (mm) - 11,880 -

KFL 526/C (mm) - 11,880 11,650

5,600 + working width

3,440 + working width

2,800

1,720

Movable sideFixed side

950

1,74

62,20

0

Width dimensions K 520 Optimat

Length dimentions K 520 Optimat

Technical data K 520 Optimat

You will find information about the K 520 profiLine in “Edge banding and combination machines K 520 profiLine – Series production in superb quality“.

K 520 Optimat and

profiLine – high-

performance machines

offering compact to

tailored solutions

Pho

tos

may

sho

w o

ptio

nal e

xtra

s an

d ar

e no

t a b

indi

ng d

epic

tion

of th

e or

dere

d pr

oduc

t. S

ubje

ct to

cha

nges

. K 5

20 O

ptim

at |

05-2

017

| EN

For the Success of Original

Technology

A VDMA campaign

HOMAG GmbH Homagstraße 3 - 572296 SchopflochGermanyTel. +49 7443 [email protected]


Recommended