EDM CATALOG - BRAILLON USA

MAGNETIC CHUCKS AND ACCESSORIES EDM CATALOG

Braillon Magnetic Systems Inc.2333 Wisconsin Ave.Downers Grove, IL 60515 USA(312) 912 [email protected]

Permanent magnetic pallet for spark erosion. EDM type PMA/SPARK REF 40.60.01

High holding power / Stable top plate / Rugged construction / Power adjustable / Waterproof construction / Force: : 100 N/CM² / Longer life Grinding, EDM, Control . Permanent magnetic chuck with NEODYNIUM magnets . Parallel fine pole pitch steel + brass . Without special adaptation Nominal force : 100 N/cm² Admissible wear of top plate : 5 mm Magnetic field height : 3 mm Options All the BMS pallet can be deliver in simple version (without special machining) or for palletizing system: EROWA-3R-HIRSCHMANN-V&B ... A BMS specialist will inform you.

Reference Poids en kg A B C 40.60.01.150150 8 150 150 45 40.60.01.250150 13 250 150 45 40.60.01.240240 20 240 240 58 40.60.01.320320 32 320 320 58

Permanent magnetic pallet for milling type PMA/MIL REF 40.60.03

High holding power / Twin magnetic system / Stable top plate / Rugged construction / Waterproof construction / Force: : 150 N/cm² / Longer life Milling, Drilling, Contouring, Machining, Planning . Twin magnetic system (magnets inserted into the body as well as into the top plate), offering exceptional holding power for the most severe machining operations on small, medium and large components. . Magnetic circuit fitted with generously proportioned Neodymium magnets . Very robust construction . Without special adaptation Nominal force : 150 N/cm² Admissible wear of top plate : 5 mm Magnetic field height : 8 mm Options All our pallets can be delivered in a simple version (without special machining) or for the palletizing system: EROWA-3R-HIRSCHMANN-V&B ... A specialist can inform you further.

Reference Poids en kg A B C 40.60.03.250150 17 250 150 58 40.60.03.250250 25 250 250 58 40.60.03.300300 35 300 300 62 40.60.03.320320 38 320 320 62 40.60.03.400300 49 400 300 67

*Dimensions listed are in mm


Permanent magnetic chuck model PF2 REF 10.01 High holding power / Power adjustable / Longer life Grinding, EDM, Control . Permanent magnetic chuck with NEODYNIUM magnets . Parallel fine pole pitch steel + brass Nominal force : 100 N/cm² Admissible wear of top plate : 8 mm Magnetic field height : 4 mm Options Sine execution

Reference Poids en kg A B C D E F 10.01.13070 3 130 70 49 101 10 10 10.01.175100 7 175 100 49 140 10 10 10.01.255130 12 255 130 49 206 10 10 10.01.150150 9 150 150 51 115 10 10 10.01.250150 15 250 150 51 206 10 10 10.01.300150 18 300 150 51 257 10 10 10.01.350150 21 350 150 51 305 10 10 10.01.400150 24 400 150 51 357 10 10 10.01.450150 27 450 150 51 407 10 10 10.01.300200 24 300 200 51 257 10 10 10.01.400200 32 400 200 51 357 10 10 10.01.450200 36 450 200 51 407 10 10 10.01.500200 41 500 200 51 455 10 10 10.01.600200 49 600 200 51 556 10 10 10.01.300250 29 300 250 56 257 10 10 10.01.350250 38 350 250 56 305 10 10 10.01.400250 44 400 250 56 357 10 10 10.01.500250 56 500 250 56 454 10 10 10.01.600250 69 600 250 56 585 10 10 10.01.300300 36 300 300 56 257 10 10 10.01.400300 52 400 300 56 357 10 10 10.01.500300 67 500 300 56 454 10 10 10.01.600300 81 600 300 56 535 10 10 10.01.600400 106 600 400 56 556 10 10



NO MOREDROPS! LET THE MAGNETSKETCH YOUR PARTS

EDM SAFE

Permanent magnetic chuck type PF2-EDM REF 10.02 Stable top plate / Rugged construction / Power adjustable / Waterproof construction / Force: : 95 N/cm² / Longer life / Low height / Low magnetic field EDM . Permanent magnetic chuck with NEODYNIUM magnets . Parallel fine pole pitch: steel + brass . Lower height Nominal force : 95 N/cm² Admissible wear of top plate : 8 mm Magnetic field height : 3 mm Options With flashing holes system for EDM machines Sine execution Palletizing system in the base plate:EROWA-3R-HIRSCHMANN-V&B ...

Reference Poids en kg A B C D E F 10.02.150150 7 150 150 35 95 160 11,5 10.02.175100 5 175 100 32 120 185 11,5 10.02.255130 9 255 130 32 200 265 11,5 10.02.250150 11 250 150 35 194 260 11,5 10.02.300150 13 300 150 35 245 310 11,5 10.02.350150 15 350 150 35 295 360 11,5 10.02.450150 19 450 150 35 395 460 11,5 10.02.400200 23 400 200 35 342 410 11,5 10.02.400300 32 400 300 35 342 410 11,5



CIRCULAR PERM. MAGNETIC CHUCK TYPE MPF2 REF 11.05 Stable top plate / Rugged construction / Power adjustable / Waterproof construction / Force: : 85 N/cm² / Longer life / Low magnetic field Grinding, EDM, Control, Laser welding . Circular magnetic chuck with NEODYMIUM magnets . Low magnetic field . Fine pole pitch . Suitable for small and thin workpieces . Specially designed for high precision applications . Magnetic holding power adjustable from 0 to 100% Nominal force : 85 N/cm² Admissible wear of top plate : 5 mm Magnetic field height : 4 mm Options Mounting flange Concentric grooves for easy centering workpieces Any other machining on the top or base plate Palletizing systems: ITS-100 EROWA Auxiliary top plate Special design for laser welding Palletizing system in the base plate:EROWA-3R-HIRSCHMANN-V&B ...

Reference Poids en kg A B C D E F 11.05.100 2.5 100 50 85 60 4 (4x)M8 11.05.130 5 130 50 115 90 4 (4x)M8 11.05.150 6.5 150 50 132 110 4 (4x)M8 11.05.200 12 200 52 180 160 4 (4x)M10 11.05.250 19 250 52 230 200 4 (4x)M10 11.05.300 28 300 54 280 250 4 (4x)M10



CIRCULAR MAGNETIC BLOCK TYPE MMC REF 13.22 Rugged construction / Waterproof construction / Longer life Grinding, EDM, Control . 1 workholding face . With ON/Off mechanism Admissible wear of top plate : 3 mm Magnetic field height : 6 mm Options

Reference Poids en kg A B C D E F 13.22.50 0.7 50 50 25 35 (4x)M5 85N 13.22.80 2.2 80 65 50 60 (4x)M6 400N

SINGLE SINE TABLE TYPE PF2/SS REF 12.01 Stable top plate / Rugged construction / Power adjustable / Waterproof construction / Force: : 100 N/CM² / Longer life / Low height / Low magnetic field Grinding, EDM, Control . Steel sine base, hardened to 60 HRC, protected against corrosion and precision ground . Low overall height (hinge mounted on magnetic chuck) . Swiveling on longitudinal axis . With magnetic chuck model PF Nominal force : 100 N/cm² Admissible wear of top plate : 8 mm Magnetic field height : 4 mm Options Sine tables with swivel on transverse axis With all other magnetic chuck Palletizing system in the base plate:EROWA-3R-HIRSCHMANN-V&B ...

Reference Poids en kg A B C D E F 12.01.175100 11.5 175 100 84 75 225 102 12.01.255130 19 255 130 84 100 305 132 12.01.150150 14.5 150 150 84 100 200 152 12.01.300150 28 300 150 84 100 350 152 12.01.350150 38 350 150 84 100 400 152

Single sine table with fine pole pitch magnetic chuck type EDM/SI REF 12.11 Stable top plate / Rugged construction / Power adjustable / Waterproof construction / Low magnetic field EDM . Steel sine base, hardened to 60 HRC, protected against corrosion and precision ground . Low overall height (hinge mounted on magnetic chuck) . Swiveling on longitudinal axis . With magnetic chuck model EDM Nominal force : 100 N/cm² Admissible wear of top plate : 8 mm Magnetic field height : 4 mm Options Sine tables with swivel on transverse axis With all other magnetic chuck Palletizing system in the base plate:EROWA-3R-HIRSCHMANN-V&B ...

Reference Poids en kg A B C D E F 12.11.250150 15 250 150 65 135 290 165 12.11.300150 20 300 150 65 135 340 165 12.11.300200 28 300 200 65 185 340 215 12.11.300300 45 300 300 70 285 340 340


SINE TABLE TYPE SSD REF 12.04

Rugged construction / Sure / Effective Grinding, EDM, Control . Sine base made of hardened steel 55-58HRC . Hardenned and precision ground . Low height . Angle of tilt along 2 axes . Supplied with sine conversion table Options Sine table with T slots

Reference Poids en kg A B C D E 12.04.175100 12 175 100 100 100 75 12.04.150150 17 150 150 100 100 100 12.04.300150 36 300 150 100 200 100


SINE TABLE TYPE SS Standard REF 12.03

Rugged construction / Low height / Sure / Effective Grinding, EDM, Control . Sine base made of hardened steel 55-58HRC . Hardenned and precision ground . Low height . Angle of tilt along longitudinal axe . Supplied with sine conversion table Options Sine table with T slots

Reference Poids en kg A B C D 12.03.175100 6.5 175 100 60 75 12.03.150150 8 150 150 60 100 12.03.300150 16 300 150 60 100

MAGNETIC BLOCK 3 WORKHOLDING FACES TYPE BAP3 REF 13.12

Rugged construction / Waterproof construction / Force: : 50 N/cm² / Longer life / Low magnetic field Grinding, EDM, Control . 3 workholding faces . With ON/Off mechanism B = active faces Nominal force : 50 N/cm² Admissible wear of top plate : 4 mm Magnetic field height : 2 mm Options

Reference Poids en kg A B C 13.12.55 2.8 55 91 126 13.12.70 4 70 91 126

3 faces permanent magnetic block type AP/BAP2 REF 13.14

Rugged construction / Waterproof construction / Force: : 100 N/cm² / Longer life / Low magnetic field Grinding, EDM, Control . 3 workholding faces . With ON/Off mechanism Nominal force : 100 N/cm² Admissible wear of top plate : 3 mm Magnetic field height : 4 mm Options

Reference Poids en kg A B C 13.14.200 7 70 165 200

MAGNETIC BLOCK 4 WORKHOLDING FACES TYPE BAP4 REF 13.11

Rugged construction / Waterproof construction / Force: : 70 N/cm² / Longer life / Low magnetic field Grinding, EDM, Control, Machining . 4 workholding faces . With ON/Off mechanism Nominal force : 70 N/cm² Admissible wear of top plate : 4 mm Magnetic field height : 2 mm Options Possible construction in stainless steel ( model CP: force=50N/cm²)

Reference Poids en kg A B C D 13.11.175 3 175 115 64 64 13.11.195 3.8 195 135 64 64 13.11.175CP 3 175 115 64 64 13.11.195CP 3.8 195 135 64 64


MAGNETIC BLOCK WITH DUAL FACE TYPE BM2 REF 13.21

Rugged construction / Power adjustable / Waterproof construction / Force: : 40 N/cm² / Longer life / Low magnetic field Grinding, EDM, Control . 2 workholding faces . With 2 separate ON/Off mechanism . Delivered by pair Nominal force : 40 N/cm² Admissible wear of top plate : 6 mm Magnetic field height : 4 mm Options Delivered with only 1 workholding face on special request.

Reference Poids en kg A B C D 13.21.125 2.5 125 52 50 98 13.21.180 3.6 180 52 50 153 13.21.250 5 250 52 50 225

LAMINATED BLOCKS TYPE LB REF 14.01 Silver brazed top plate / Rugged construction / Longer life Grinding, EDM, Milling, Control, Drilling, Machining, Positioning . Silver-brazed top plate machinable . Pole pitch : steel 3 mm - brass 1.5 mm (or 4+2) Laminated blocks do not have a magnetic field of their own, but are able to transmit the magnetic flux of the chuck towards the workpiece, by positioning them with the laminations being parallel to those of the chuck pole plate. They are used to protect the pole plate when carrying out difficult machining operations. Options

Any other dimensions on request

Reference kg A B C wheight

mm

mm mm

14.01.10032040 10 100 320 40

14.01.10065040 21 100 650 40


LAMINATED V-BLOCKS TYPE TBV (the pair) REF 14.03 Silver brazed top plate / Rugged construction / Longer life Grinding, EDM, Milling, Control, Drilling, Machining . Silver-brazed top plate machinable . Pole pitch : steel 3 mm - brass 1.5 mm (or 4+2) Laminated blocks do not have a magnetic field of their own, but are able to transmit the magnetic flux of the chuck towards the workpiece, by positioning them with the laminations being parallel to those of the chuck pole plate. They are used to protect the pole plate when carrying out difficult machining operations. Options Delivered by pair on request Any other dimensions on request Other pole pitch (4+2)

Reference Poids en kg A B C 14.03.508040 2.4 50 80 40 14.03.5010040 3 50 100 40


LAMINATED BLOCK TYPE TB REF 14.02 Stable top plate / Silver brazed top plate / Rugged construction / Longer life Grinding, EDM, Milling, Control, Drilling . Silver-brazed top plate machinable . Pole pitch : steel 3 mm - brass 1.5 mm (or 4+2) Laminated blocks do not have a magnetic field of their own, but are able to transmit the magnetic flux of the chuck towards the workpiece, by positioning them with the laminations being parallel to those of the chuck pole plate. They are used to protect the pole plate when carrying out difficult machining operations. Options Delivered by pair on request Any other dimensions on request Other pole pitch (4+2)

Reference kg A B C 14.02.965726 0.5 96 57 26 14.02.563215 0.3 56 32 15 14.02.2508550 8.5 250 85 50 14.02.5008550 16 500 85 50 14.02.2507525 3.8 250 75 25 14.02.25010025 5 250 100 25 14.02.25015025 7.5 250 150 25 14.02.25020025 10 250 200 25 14.02.25025025 12.5 250 250 25 14.02.30015025 9 300 150 25 14.02.30020025 12 300 200 25 14.02.30025025 15 300 250 25 14.02.40010025 8 400 100 25 14.02.40015025 12 400 150 25 14.02.40020025 16 400 200 25 14.02.40025025 20 400 250 25 14.02.5007525 7.6 500 75 25 14.02.50010025 10.1 500 100 25 14.02.2507540 6.1 250 75 40 14.02.25010040 8.1 250 100 40 14.02.4007540 9.8 400 75 40 14.02.40010040 12.8 400 100 40 14.02.5007540 12.2 500 75 40 14.02.50010040 16.2 500 100 40



AUXILIARY POLE PLATE TYPE PP REF 14.04 Stable top plate / Longer life Grinding, EDM, Milling, Control, Drilling, Machining . To use with magnetic chuck model AP/PF . Pole pitch : steel 3 mm - brass 0.8 mm (or 1.5+0.5) Laminated blocks do not have a magnetic field of their own, but are able to transmit the magnetic flux of the chuck towards the workpiece, by positioning them with the laminations being parallel to those of the chuck pole plate. They are used to protect the pole plate when carrying out difficult machining operations. Options Any other dimensions on request Other pole pitch Special machining

Reference Poids en kg A B C 14.04.20010021 4.8 200 100 21 14.04.25013021 6.1 250 130 21 14.04.30015021 7.3 300 150 21 14.04.35015021 9.1 350 150 21 14.04.40020021 10 400 200 21 14.04.50020021 11 500 200 21



LAMINATED BLOCKS IN CASE REF 14.08 Silver brazed top plate / Very Effective Grinding, EDM, Control -Practical box for EDM composed of: 1 Tilt block 98x69 mm 2 Blocks with longitudinal poles LB 155x45x40 mm 2 V Blocks at 90°, Traversing poles TRV 57x67x47 mm

-Practical Standard box for grinding, composed of : 2 Blocks 57x32x15 mm 2 Blocks 97x57x26 mm 2 Blocks 97x53x22 mm 2 V Blocks 57x67x47 mm

Reference Poids en kg A 14.08 12 Practical Standard Box 14.08.EDM 12 Practical EDM Box

Date post:	07-Jan-2017
Category:	Engineering
Upload:	paul-tabailloux
View:	186 times
Download:	4 times

EDM CATALOG - BRAILLON USA

Engineering