1
AUTOMOTIVECARE/REPAIR/MECHANICS
DRIVER THEORY (Minimum age: 15)In the 30-hour theory program, students will cover the Pennsylvania driver’s manual and all phases of defensive driving. Completion of the course may make the beginning driver eligible for reduced insurance rates. Students do not need a permit or license to begin this theory course. See information on Page 12.
PA SAFETY INSPECTION MECHANICThis course is to certify mechanics to conduct the PA Vehicle Inspection. A Commonwealth of PA State Inspection certification card will be issued by the PA Department of Transporta-tion upon completion of this course. Class cov-ers rules and regulations for vehicle inspection. Students must hold a valid driver’s license for the type of vehicle they wish to inspect. Three different certification categories are avail-able. Category I: all passenger cars, trucks up to 17,000 pounds GVW, and trailers up to 10,000 pounds GVW; Category II: all motor-cycles; Category III: heavy trucks over 17,000 pounds GVW, trailers over 10,000 GVW, and all buses. Students are required to pass a baseline test, and then for each category chosen, a category test and actual inspection. The PA State Inspection manual is included in the cost of tuition.
PA SAFETY INSPECTIONRENEWAL TRAINING CLASSMechanics may renew their mechanic certifi-cation by passing the required examination within 180 days of notification from PennDOT that their mechanic card is due to expire. This new recertification requires you to pass an on-line exam in order to renew your certification and the certification is valid for five years. This training class will help mechanics to successful-ly pass the online exam. CMAVTS will provide mechanics the opportunity to take the online exam after the training class. Mechanics must complete the online registration with PennDOT at www.patrainingportal.com before arriv-ing to the training class and must have their Ac-cess Code and account information available in order to test online at CMAVTS.
ENHANCED VEHICLE INSPECTOR &DOCUMENT REVIEWER TESTINGCategory IV: reconstructed vehicles, specially constructed, modified, collectibles or street roads.To become an Enhanced Vehicle Safety Inspec-tor and Document Reviewer, you must complete a self-study program and then pass a final exam given at CMAVTS. OPTION #1: Test only. OPTION #2: 4-hour theory class plus test. Call the adult Education Office to schedule. Only currently certified inspection mechanics may take this course.Self-study instruction is available at:http://www.dot3.state.pa.us/pdotforms/in-spections/enhanced_si_guide.pdf
EMISSION INSPECTOR CERTIFICATION & RE-CERTIFICATION FINAL EXAM(Visual Gas Cap) - Northern RegionTraining materials are available for downloadat www.paimtraining.com. Download and re-view the training material and then contact theAdult Ed Department at Columbia-MontourAVTS to schedule a proctored written exam.Upon successful completion the student will re-ceive an Emission Inspection ID card that allowsthem to perform visual and gas cap emissioninspection on vehicles registered in the north-ern region only.
OBD EMISSION INSPECTORCERTIFICATION (EIC)This training is the 16 hour PennDot course which covers all aspects of PA’s Emission In-spection Program. After attending and passing the exams, you will be able to emissions inspect all vehicles registered in ALL counties with ap-proved equipment.
OBD EMISSION INSPECTORRE-CERTIFICATION (EIR)This 4 hour course is designed to comply with PA’s Emissions Inspector Re-certification Pro-gram. PennDot strongly suggests scheduling for courses up to six months in advance of your expiration date.
2
AUTOBODY REPAIRIn this 30 hour course students will learn how to make minor adjustments to doors, hoods, and moldings. There will also be instruction in repairing small dents, installing parts and moldings, using plastic fillers, preparing sur-faces, applying primer-surfacer, and painting and striping. Students will purchase their own materials and supplies based on the needs of their individual vehicles and projects.
FUNDAMENTALS OFAUTOMOTIVE AIR CONDITIONINGIn this 12 hour course students will learn the theory of how an automotive a/c system works; automotive air conditioning system/component identification and operation; basic system and component diagnosis and repair procedures; identify system and component leaks using both Freon detectors and dye checking systems and evacuation and recharging procedures for most automotive air conditioning systems.
SMALL ENGINE/LAWN EQUIPMENT REPAIRTopics in this 24-hour class include theory over-view of a 2 and 4 stroke engine, component, tool and fastener identification, component measurement, carburetor theory, settings and specifications, run engines and live work. Stu-dents are encouraged to bring own tools and equipment in need of repair. Cost of class in-cludes a ¼” socket set to be given to each student upon completion of course.
COMPUTERBUSINESS SKILLS
SEE OUR EXTENSIVE ONLINE CATALOG AT WEBSITE CONTAINED IN AD BELOW.
CONSTRUCTION &BUILDING MAINTENANCE CARPENTRY / POWER TOOLSBuild your own project!This 24 hour course will cover safety and the proper use of hand tools and stationary power machines. It is designed to provide experience in the skills needed to complete typical carpentry projects associated with construction. Project fee added to class cost depending on project materials needed – students may choose to make projects such as an Adirondack chair, shelf, etc. Safety glasses required and available for an additional fee or students my bring their own.
RESIDENTIAL PLUMBINGTopics in this 24 hour course will include drain, waste, and vent piping, and hot and cold wa-ter distribution lines as well as the installation and maintenance of some of the more common plumbing fixtures and appliances.
ELECTRICAL WIRING - BASIC RESIDENTIALIn this 24 hour course students will learn the correct method of performing a variety of new electrical installations and doing repairs to prepare for entry level jobs. The course combines theory with hands-on application and emphasizes proper and safe use of tools, choosing the right materials and compliance with codes. Students will practice wiring switch-es and receptacles, motors, and complete wire fills.
BASIC BUILDING andPROPERTY MAINTENANCEIn this 18 hour course the caretaker will learn a basic understanding of how their building operates on four basic systems: electrical; hot and cold water; drain, waste, vent; heating and cooling. The homeowner will learn how each system operates, learn to maintain them and troubleshoot. For example: how to repair a leaky faucet and drain, faucet replacement, how to fix a running toilet, replace a switch, outlet and light fixture. Also included are: safety, hand tools, drywall, caulking, paint-ing/wallpaper, installing ceiling fans replacing door knobs and deadbolts, and more. Great
Online learning anytime, anywhere...
just a click away!
www.ed2go.com/cmvt
3
course for maintenance personnel, single/di-vorced, first-time home buyer, renter, experi-enced homeowner and do-it-yourselfer! Text book included.
RAFTER LAYOUT AND ROOF CONSTRUCTIONThis 24 hour course introduces students to the principles associated with rafter layout and basic roof construction. Topics covered will in-clude: power tool safety, basic roof styles, lay-out terms related to roof construction, methods to layout a common rafter, construct a gable roof, layout gable end studs, and roof sheath-ing. Students will be required to provide a 25’ tape measure.
STAIR LAYOUT AND CONSTRUCTIONThis 24 hour course introduces students to the principles associated with stair stringer lay-out and rough construction. Topics covered will include: power tool safety, stair construc-tion terms, determining the unit rise and run of a stringer, stair stringer layout, framing a straight stair case, framing stairs with a land-ing. Students will be required to provide a 25’ tape measure.
DRAFTING AND DESIGN
AutoCADThis 36 hour course is a hands-on industry ex-perience driven class for draftsmen, design-ers, engineers and project managers with little or no CAD experience. Topics to be covered include the AutoCAD interface, display com-mands, coordinate & basic drafting tools, creating 2D geometry, editing 2D geometry, managing object properties, CAD construction techniques, creating text styles, introduction to blocks, dimensioning, hatching, paper space and plotting.
ARCHITECTURAL DRAFTING USING AutoCADThis 30 hour course is designed to teach stu-dents the fundamentals of drawing residential homes for permit approvals. Students will work with AutoCAD and some Architectural Desktop to complete home designs. Students will learn the various parts of the home and different
plan elements required to be shown on the plans in accordance with the ICC codes.
ELECTRICAL AND ELECTRONICS
BASIC ELECTRONICSThis 24 hour course is an entry-level electronics course. Topics will include foundations of elec-tricity, Ohm’s Law, passive devices, schematic symbols, and using test equipment.
DIGITAL ELECTRONICSIntegrated logic components and circuits are studied in this 24 hour course including basic logic gates (AND,OR NOT) and storage com-ponents such as flip-flops and latches. The op-eration of logic circuits is presented.
BASIC ELECTRICITYThis 24 hour course is designed for the begin-ner student interested in entering the electri-cal field. The class will cover electrical safety and progress through basic electrical theory; electrical quantities and Ohm’s Law; series, parallel, and combination circuits; measuring instruments; wire tables; magnetic induction; alternating current; transformers; and motors. A skills manual is included in the course. This course is approved under the PA Water and Wastewater Operator Training Program for 24 contact hours.
PROGRAMMABLE LOGIC CONTROLLERS (PLC)*Note: Limited to 8 students.This 24 hour course takes a practical approach to installing, programming and troubleshooting the PLC 5. AC I/O, DC I/O, BCD signals, mov-ing data timing charts, and more will be cov-ered. A skills manual is included in the course.
THREE PHASE MOTOR CONTROLS*Note: Limited to 8 students.This 24 hour course offers students the oppor-tunity to learn concepts critical to the industrial and commercial electrician. It is ideal for indi-viduals interested in updating and broadening their electrical skills. Covers basic electricity, 3 Phase power circuits, wiring of motors, control circuits, and motor control blue prints. Electrical Lab boasts state of the art training equipment.
5
HEATING VENTILATION AND AIR CONDITIONING
OIL BURNER TECHNICIANThis 24 hour course offers a basic introduc-tion to oil burners. The course will cover fuel oil, fuel tanks and piping, chimneys and draft, combustion chambers, nozzles and air/fuel mixture, and combustion testing. Students will participate in laboratory activities. AIR CONDITIONING &REFRIGERATION TECHNICIANThis 60 hour program will begin with air condi-tioning theory. Types of refrigerants, controls, metering devices, compressors, evaporators and condensers will be covered. We will provide students with hands-on training of air conditioning equipment. Topics include evacu-ating, charging, recovery, reclaiming, tools, and troubleshooting. Course includes training to prepare students for the EPA certification test. Instruction will be on the proper handling of refrigerants with the emphasis on recovery and reclaiming. Text and EPA test will be in-cluded.
INDUSTRIAL MACHINE TECHNOLOGY
MACHINE TECHNOLOGYThis 24 hour course is a multi-level machine tool theory and operation. It is a hands-on course featuring lathe and milling machine op-eration. Instruction will cover fixturing, set up, operating techniques, safety, tooling, speeds and feeds.
METAL CUTTING TECHNOLOGYThis 18 hour class will cover the following sub-jects: insert manufacturing, tool wear, machin-ing economics, calculating speeds/feed/ipm/ipr, turning, tool codes, threading, parting and grooving, boring, milling theories, drilling and tool holding.
MACHINE TECHNOLOGY/COMPUTER NUMERIC CONTROL (CNC)This 24 hour course will introduce students to CNC Machine Tool theory and operation. Topics covered will include an introduction to CNC programming and machine tool set up. Students will have the chance to write a CNC program and use it to machine a work piece.
ORNAMENTALHORTICULTUREIdeal courses for those looking for an entry-level job in a floral shop or nursery.
BASIC FLORAL DESIGNThis 1 night, 2.5 hour class provides fun and easy instruction of the basic skills needed to make centerpieces, wreaths and arrange-ments. Using fresh and silk materials learn step by step methods used by professional flo-rists. Classes are structured by the season/holiday, check current schedule on our web-site, www.cmvt.us for a listing of offerings.
LOW MAINTENANCE LANDSCAPINGThis 10 hour course will consider alternative approaches to the way we design and exe-cute, as well as maintain, our landscapes; a strong emphasis will be placed on functional and purposeful plantings. Special attention will be given to achieving successful and long-term color in the garden and also in contain-ers. Instructor will facilitate presentations with slides. Problems and discussion are welcome. The course will consist of four in-class sessions and one Saturday session at an outdoor site for “hands-on experience”.
6
HEALTH CARE
AMERICAN HEART ASSOCIATION HEART-SAVER CPR w/AED (for laypeople, not healthcare professionals)4 hrs. The knowledge and skills you will learn from this course may help you to save a life. You will learn CPR for all age groups, how to use an AED (automated external defibrilla-tor) and how to relieve choking (foreign-body airway obstruction). This course will enable you to recognize emergencies such as sudden cardiac arrest, the leading cause of death in the United States and how to respond to them. Approximately 330,000 people die annually from Sudden Cardiac Arrest with 250,000 of those deaths occurring outside the hospital. This course is approved under the PA Water and Wastewater Operator Training Program for 4 contact hours.
AMERICAN HEART ASSOCIATION HEART-SAVER CPR w/AED – Renewal –(for laypeople, not healthcare professionals)(You must submit a copy of your current CPR care with registration)4 hrs. The knowledge and skills you will learn from this course may help you to save a life. You will learn CPR for all age groups, how to use an AED (automated external defibrilla-tor) and how to relieve choking (foreign-body airway obstruction). This course will enable you to recognize emergencies such as sudden cardiac arrest, the leading cause of death in the United States and how to respond to them. Approximately 330,000 people die annually from Sudden Cardiac Arrest with 250,000 of those deaths occurring outside the hospital.This course is approved under the PA Water and Wastewater Operator Training Program for 4 contact hours.
AMERICAN HEART ASSOCIATIONBASIC LIFE SUPPORT(health care professionals only)Part 1: Complete the course Online - go to: www.onlineAHA.orgPART 2: Proctored Exam (Must print out Cer-tificate of Completion of Part 1 and bring to appointment for skills testing) by appointment
ON-LINE HEALTH CARECOURSES ARE ONLY A CLICK AWAY!• CBCS Administrative Medical Specialist w/Medical Billing and Coding •
• CPC Administrative Medical Specialist w/Medical Billing and Coding (AHIMA prep) •
• CBCS Medical Billing and Coding CPC Medical Billing and Coding (AHIMA prep) •
• Pharmacy Technician Veterinary Assistant •
• Administrative Dental Assistant Clinical Dental Assistant •
• ICD Medical Coding Physical Therapy Aid •
— REGISTER ON-LINE AT —
http://careertraining.ed2go.com/cmvt/
9
Online learning anytime, anywhere...
just a click away!
www.ed2go.com/cmvt
Introduction to Stock Options Learn how stock options can protect yourportfolio and help you profit in any typeof market.
Accounting FundamentalsGive yourself skills that are in highdemand by exploring corporateaccounting with a veteran instructor.
Creating Web PagesLearn the basics of HTML so you candesign, create, and post your very ownsite on the Web.
Creating a Successful Business PlanTurn your business ideas into a solid planfor financing and long-term success.
051403
Prices start as low as:
Instructor-Facilitated
24-Hour Access
Online Discussion Areas
6 Weeks of Instruction
100s of Courses to Choose From
Learn from the comfortof home!
Prepare for employment in someof today’s hottest careers with acomprehensive, affordable, andself-paced online Career TrainingProgram.
One-On-One Instructor Assistance
24-Hour Access
All Materials and Books are Included!
Certificate Upon Successful Completion
Courses Start Anytime
3-6 Months of Instruction
Jump StartYour Career orFind a New One!
INSTRUCTOR LED ONLINE COURSES
Find A Course
How to Make Money From Your WritingWhether you want to create your ownbusiness, add to your income, supplementyour retirement, or boost what you'reearning as a writer, you'll find the how-to's here.
Introduction to Microsoft Outlook 2010Take control over your meetings, emails,and to-do lists by mastering the essentialsof Microsoft Outlook 2010.
Solving Classroom Discipline Problems Veteran teacher reveals the secrets to anorderly classroom. A step-by-step approachto effective, positive discipline.
Certified Personal Trainer - 62 hrs
Prepare for an in-demand career as a
personal trainer as you earn a nationally-
recognized W.I.T.S. certification and gain
real-life experience in an internship.
Travel Agent Training – 200 hrs
Learn the basic skills needed to operate a
computer reservation system for airlines,
travel agencies, cruise lines, hotel, or as a
home-based agent, and get started in a
career in the travel industry.
Principles of Green Building – 30 hrs
The Principles of Green Buildings (PGB)
program explains the science that
individuals in the building, remodeling, or
trade industries need to know in order to
make buildings perform more efficiently.
CAREER TRAINING PROGRAMSOptician Certification Training -
150 hrs
Master the skills you need for a successfulcareer as an optician and prepare yourselfto take the ABO certification exam.
Medical Transcription – 240 hrs
Learn to transcribe medical reports inhospitals, offices, or from home with themost popular transcription program in thecountry for entry-level training.
Event Management & Design -
300 hrs
From planning to pyrotechnics, the EventManagement and Design Online TrainingProgram will teach you everything youneed to know to create events that aretruly special.
Learn more
Columbia-Montour AVTS
www.ed2go.com/cmvt $95
careertraining.ed2go.com/cmvt
Reach us at: (570) 784-8040, ext. 3322
SEVERAL NEW COURSES LAUNCH EVERY MONTH!
WWW.ED2GO.COM/CMVT
11
Columbia Montour Counties415 Central Road #2, Bloomsburg, PA 17815
(570) 387-6288Fax: (570) 387-8827TTY: (570) 387-4294
To visit PA CareerLink online go to www.cwds.state.pa.us
Directions to Columbia-Montour AVTS:From Bloomsburg:Follow Route 11 North from Bloomsburg for 4 miles. Turn left at Bloomsburg Carpet Industries onto Wolf Hollow Rd. Take the first right onto Sweppenheiser Drive.
From Berwick:Follow Route 11 South. Pass under Interstate 80. Turn right at second traffic light onto Keifers Lane. Take the second left onto Sweppenheiser Drive.
From Interstate 80:Take exit 241 (Lime Ridge). Follow Route 11 South to the second traffic light. Turn right onto Keifers Lane. Take the second left onto Sweppenheiser Drive.
13
“Securing Drinking Water and Wastewater Facilities” Mandatory Security Course Requirement for PA. Certified Operators
The Water and Wastewater Systems Operators’ Certification Regulation mandates that all certified operators complete the Department of Environmental Protection’s (DEP) system security course called “Securing Drinking Water and Wastewater Facilities.” This requirement encompasses all classifications of operators, including those with a “grandfathered” certificate (i.e., NTNC drinking water certificate or CSSP wastewater certificate). The course must be completed by the end of the operator’s first full cycle that begins on or after October 1, 2010.
The training is available in three formats: Correspondence (Course ID 2953), Classroom (Course ID 2952) and Web-based (Course ID 2954). These are the only courses that fulfill the requirement.
You only need to take the course once!
CMAVTS offers the Correspondence Course (Course ID 2953). Call the Adult
Education Office at 570-784-8040 to obtain your Student Manual. Upon successful completion of the course you will receive a Certificate of Completion by Columbia-Montour AVTS and 5 continuing education hours will be reported to the DEP.
To find upcoming classroom sessions of the course, please visit the Earthwise
Academy calendar at www.earthwise.dep.state.pa.us/edu, then click “Calendar” on the left side and look for the title “Securing Drinking Water and Wastewater Facilities.”
The web-based version is available through DEP’s Earthwise Academy eLearning
Center:
Go to http://padepelearn.com Under “Required Security Training” click on course 2954, Securing Drinking
Water and Wastewater Treatment Facilities. Follow the instructions to log in using your Client ID number.
If you prefer, you can take the course before your required full cycle to fulfill the security course requirement. If you wish to view your operator training transcript, enter the Earthwise Academy using the address above and click “Transcripts.” Enter your DEP Client ID number to view your transcript.
CMAVTS is a sponsor ofWATER AND WASTEWATER OPERATOR TRAINING IN
PENNSYLVANIA.
Approved classes are added often.For further information call the
Adult Education Office. (570) 784-8040 Ext. 3322
15
16
17
It is
the
polic
y of
CM
AVTS
not
to d
iscrim
inat
e in
thei
r ed
ucat
iona
l pro
gram
s, ac
tiviti
es o
r em
ploy
men
t pra
ctic
es b
ased
on
race
, col
or, n
atio
nal o
rigin
, sex
, disa
bilit
y, a
ge, r
elig
ion,
anc
estr
y or
any
oth
er le
gally
pro
tect
ed c
lass
ifica
tion.
Thi
s po
licy
is in
acc
orda
nce
with
the
stat
e an
d fe
dera
l law
s, in
clud
ing
Title
VI o
f th
e C
ivil
right
s A
ct o
f 19
64, T
itle
IX o
f th
e Ed
ucat
ion
Am
endm
ents
of
1972
, Sec
tions
503
and
504
of
the
Reha
bilit
atio
n A
ct o
f 19
73, t
he A
ge D
iscrim
inat
ion
Act
of
197
5, th
e A
mer
ican
s with
Disa
bilit
ies
Act
of
1990
and
the
Penn
sylv
ania
Hum
an R
elat
ions
Act
. Inf
orm
atio
n re
lativ
e to
a sp
ecia
l acc
omm
odat
ion,
grie
vanc
e pr
oced
ure,
and
the
desig
nate
d re
spon
sible
offi
cial
for c
ompl
ianc
e w
ith T
itle
VI,
and
Sect
ion
504
may
be
obta
ined
by
cont
actin
g th
e C
MAV
TS, 5
050
Swep
penh
eise
r D
r., B
loom
sbur
g, P
A 1
7815
-892
0.
© F
ebru
ary
2017
CO
LU
MB
IA-M
ON
TO
UR
Are
a V
ocati
onal-
Tec
hnic
al
Sch
ool
5050
Sw
eppe
nhei
ser
Driv
e Bl
oom
sbur
g, P
enns
ylva
nia
1781
5-89
20
Phon
e: (5
70) 7
84-8
040
Fax:
(570
) 784
-356
5
ww
w.c
mvt
.us