Edward Yousif February 2013
DRAINAGE DESIGN MANUALREVISION HIGHLIGHTS
1
2
DRAINAGE SOFTWARE (HYDROLOGY AND HYDRAULICS)
XP SWMM
StreamStats
Hydraulic Toolbox (Version 4.0)
Geopak Drainage (Bentley V8i)
3
SECTION 4.0 FLOODPLAIN / DETENTION SEPARATION
4
SECTION 8 CULVERT DESIGN
Culvert bottom should be designed with a natural soil “n” value.
5
SECTION 9.2 BRIDGE HYDRAULIC DESIGN
WWIT Calculation Sheet Appendix H
6
Waterway Information Table Back-Up Calculations
Calculate Freeboard and Clearance
Calculate Effective Waterway Opening Area For Bridge
Calculate Effective Waterway Opening Area For Culvert
Calculate Created Head
7
SECTION 10.0 ROADWAY DRAINAGE DESIGN
8
SECTION 10.5 LINE OR REPLACE EXISTING CMP PIPES
9
SECTION 11.0 STORMWATER DETENTION STORAGE
10
DITCH CHECKS – CHECK DAMS
11
SECTION 11.5 DETENTION IN DITCHES
Base Sheet M-26
12
APPENDICES - DRAINAGE CALCULATIONS Provide summary tables and narrative descriptions for
each set of calculations. Provide clear references to proposed plan and profile sheets.
Use Tollway recommended drainage software, or provide sample calculations if other software is used.
Tollway calculations should be separated from calculations performed for other agencies.
Check Concept Drainage Report before starting work on contract drawings. List inconsistencies with the Tollway Drainage Manual.
Verify survey vs. as-built drawings via field check.
13