Date post: | 01-Nov-2014 |
Category: |
Business |
Upload: | icebauhaus |
View: | 2,260 times |
Download: | 1 times |
Catalytic Pressure-less Depolymerization Biomass into Synthetic Diesel
the so called II. Generation
ALPHAKATZukunftsEnergie
Alphasol Modular Energy Plc. General
Establishment &Aims
Representation
Programs(Pillar)
CPD - Catalytic Pressure-less Depolymerization converts synthetic and natural polymers and long
chain hydrocarbons at temperatures between 270°C and 350°C to short-chain hydrocarbons (synthetic light oil / diesel) by adding (ion-exchanging 100 % crystalline and extreme active) y-catalysts.
Conversion only into CH2 chains and only then in molecule lengths that bind in a manner that separates unusable pollutants.
Result of 30 years of intensive scientific research and development the recognized German chemical plant and catalyst specialist Dr. Christian Koch reproducing the natural way of fossil oil production.
Input … you could produce from
Biologically renewable raw materials (wood, vegetables, grains, etc.)
Municipal WasteEnergy plants Plastics of all kinds (including PVC) Rubber, including that from automobile tires Waste oils, waxes and fats of all types (including PCBs
oils) Animal wastes (bone mill, fat, etc.) Hospital waste materials All refinery by-products (bitumen, tars, etc.) Agricultural waste (sugar cane, bagasse, saw dust,
etc.)
… and this Diesel…
has even a better efficency equal to the V-Power quality of the diesel very good quality
fulfills the EU-Norm 590. That is the EU standard for diesel at gas station
is free from aroma and generates no particels of soot during combustionThe proportion of nitric oxides in the exhaust fumes is reduced.
as Diesel so called II. Generation und then classified taxfree till 2015 in Europe
is enviromental friendlybecause no Catalysator and other Chemicals are needed
Scheme of the Catalytic Low Pressure Depolymerization process
•The material input as a solid or as a fluid cycle. The solid material input appears through an input snail as dry material with low humidity and a minimal particle size and the feedstock then mixed with a catalyst promoter, hydrated lime and carrier oil (after initial filling with oil in the procedure itself) and then the feedstock is heated in a manner that converts the organic material into fluids that are sent to a distillation column where the liquid fuels are distilled and then piped to storage tanks.
Production of Synthetic Diesel
Some example - Input
Result:
Synthetic diesel ca. 300LWater – Rest humidity ca. 50 – 150LAshe ca. 20kg
Mass balance: Input 1 ton of Celulose
C6H11O5 = 2,5 CO2 + (CH2)n (3,5) + H (4)
Pilot Plant in Addis Ababa
Thank you for your attention