EL357N

1 Copyright 2010, Everlight All Rights Reserved. Release Date : May 13, 2013. Issue No: DPC-0000014 Rev. 5

www.everlight.com

4 PIN SOP PHOTOTRANSISTOR PHOTOCOUPLER EL357N-G Series

Features:

Halogens free Current transfer ratio

(CTR: 50~600% at IF =5mA, VCE =5V) High isolation voltage between input and output (Viso=3750 V rms ) Compact 4 Pin SOP with a 2.0 mm profile Pb free and RoHS compliant. UL approved (No. E214129) VDE approved (No. 132249) SEMKO approved NEMKO approved DEMKO approved FIMKO approved CSA approved (No. 1408633)

Description

The EL357N-G series contains an infrared emitting diode, optically coupled to a phototransistor detector.

The devices in a 4-pin small outline SMD package.

Applications DC-DC Converters Programmable controllers Telecommunication equipments Signal transmission between circuits of different potentials and impedances

Schematic

Pin Configuration 1. Anode 2. Cathode 3. Emitter 4. Collector

DATASHEET 4 PIN SOP PHOTOTRANSISTOR PHOTOCOUPLER EL357N-G series

2 Copyright 2010, Everlight All Rights Reserved. Release Date : May 13, 2013. Issue No:DPC-0000014 Rev.5 www.everlight.com

Absolute Maximum Ratings (Ta=25)

Parameter Symbol Rating Unit

Input Forward current IF 50 mA

Peak forward current (1us, pulse) IFP 1 A Reverse voltage VR 6 V

Power dissipation Derating factor (about Ta=100C) PD

70 mW

2.9 mW/C Output Power dissipation

Derating factor (above Ta = 70C) PC 150 mW

3.7 mW/C

Collector current IC 50 mA

Collector-Emitter voltage VCEO 80 V

Emitter-Collector voltage VECO 7 V

Total Power Dissipation PTOT 200 mW

Isolation Voltage*1 VISO 3750 V rms

Operating temperature TOPR -55 ~ +110 C

Storage temperature TSTG -55 ~ +125 C

Soldering Temperature*2 TSOL 260 C

Notes:

*1 AC for 1 minute, R.H.= 40 ~ 60% R.H. In this test, pins 1, 2 are shorted together, and pins 3, 4 are shorted together.

*2 For 10 seconds



Electro-Optical Characteristics (Ta=25 unless specified otherwise)

Input Parameter Symbol Min. Typ. Max. Unit Condition

Forward voltage VF - 1.2 1.4 V IF = 20mA

Reverse current IR - - 10 A VR = 4V

Input capacitance Cin - 30 250 pF V = 0, f = 1kHz

Output

Parameter Symbol Min Typ. Max. Unit Condition

Collector-Emitter dark current ICEO - - 100 nA VCE = 20V, IF = 0mA Collector-Emitter breakdown voltage BVCEO 80 - - V IC = 0.1mA Emitter-Collector breakdown voltage BVECO 7 - - V IE = 0.01mA

Transfer Characteristics (Ta=25C unless specified otherwise) Parameter Symbol Min Typ. Max. Unit Condition

Current Transfer ratio

EL357N

CTR

50 - 600

% IF = 5mA ,VCE = 5V

EL357NA 80 - 160

EL357NB 130 - 260

EL357NC 200 - 400

EL357ND 300 - 600

EL357NE 100 - 200

EL357NF 150 - 300

Collector-Emitter saturation voltage VCE(sat) - 0.1 0.2 V IF = 20mA ,IC = 1mA

Isolation resistance RIO 51010 - - VIO = 500Vdc, 40~60% R.H.

Floating capacitance CIO - 0.6 1.0 pF VIO = 0, f = 1MHz

Rise time tr - 3 18 s VCE = 2V, IC = 2mA, RL = 100 Fall time tf - 4 18

* Typical values at Ta = 25C



Typical Electro-Optical Characteristics Curves



Figure 10. Switching Time Test Circuit & Waveforms

IF

IC RL

RIN

VCC

Output

Input

Input Pulse

Output Pulse

10%

90%

tf tr toff ton



Order Information

Part Number

EL357N(X)(Y)-VG

Note

X = CTR Rank (A, B, C, D, E, For none) Y = Tape and reel option (TA, TB, or none). V = VDE (option) G = Halogens free

Option Description Packing quantity

None Standard SMD option 100 units per tube

-V Standard SMD option + VDE 100 units per tube

(TA) TA Tape & reel option 3000 units per reel (TB) TB Tape & reel option 3000 units per reel (TA)-V TA Tape & reel option + VDE 3000 units per reel (TB)-V TB Tape & reel option + VDE 3000 units per reel



Package Dimension (Dimensions in mm)

Recommended pad layout for surface mount leadform



Device Marking

Notes

EL denotes Everlight 357N denotes Device Number R denotes CTR Rank Y denotes 1 digit Year code WW denotes 2 digit Week code V denotes VDE approved (optional)

EL 357N

RYWWV



Tape & Reel Packing Specifications

Tape dimensions

Dimension No. A B Do D1 E F

Dimension (mm) 4.4 0.1 7.4 0.1 1.5 + 0.1/-0 1.5 0.1 1.7 5 0.1 7.5 0.1

Dimension No. Po P1 P2 t W K

Dimension (mm) 4.0 0.15 8.0 0.1 2.0 0.1 0.25 0.03 16.0 0.2 2.4 0.1

Direction of feed from reel Direction of feed from reel

Option TA Option TB



Precautions for Use

1. Soldering Condition 1.1 (A) Maximum Body Case Temperature Profile for evaluation of Reflow Profile

Note: Reference: IPC/JEDEC J-STD-020D

Preheat Temperature min (Tsmin) 150 C Temperature max (Tsmax) 200C Time (Tsmin to Tsmax) (ts) 60-120 seconds Average ramp-up rate (Tsmax to Tp) 3 C/second max

Other Liquidus Temperature (TL) 217 C Time above Liquidus Temperature (t L) 60-100 sec Peak Temperature (TP) 260C Time within 5 C of Actual Peak Temperature: TP - 5C 30 s Ramp- Down Rate from Peak Temperature 6C /second max. Time 25C to peak temperature 8 minutes max. Reflow times 3 times

.



DISCLAIMER

1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification.

2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets.

3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please dont reproduce or cause anyone to reproduce them without EVERLIGHTs consent.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Everlight: EL357NC(TA)-G EL357N-G

Date post:	07-Mar-2016
Category:	Documents
Upload:	ajoaomv
View:	224 times
Download:	0 times

EL357N

Documents