Elec6 International Conference
30 – December 1 , 2016Nuremberg, Germany
EElectric Drives Production
2
-
The international Electric Drives Production Conference andExhibition has been established as an outstanding platform for theexchange of experiences for researchers, product developers,production experts, purchasers and potential users of electricdrives in the last years.
offers technical in total oftracks : of them concentrate on the core topics
of electric drives production technologies, materials and systems.The focus of the globally accompanying conference on EnergyTransfer Electric Vehicles ( ) is set on the technology ofwireless power transmission. And last but not least the conferenceis hosting the track, organized by the GermanEngineering Federation ( ).
Comprehensive industrial exhibitions, poster presentations and aninspiring social program will complement the conference andcreate a sustainable experience for every participant.
The is located n the oyer.
Opening time :, 201 :00 - :00, 201 8:00 - :00
Phone: +49
Mobile +49 (157) 8167 1737
Opening time Table Top Exhibition:
9:00 - 5:009:00 - 5:00
All accepted and registered will be part ofthe proceedings of E|DPC. They will be published onand indexed by and
E|
can be picked up at the registration desk.for the conference, the technical tours,
the evening will be possible.can be settled in cash ( ) .
is available in all rooms of the exhibtion centre.
C NO TENT............................................................ 2
PARTNERS ......................................................... 3
COMMITTEES................................................... 4
T S - OVERVIEWIME CHEDULE .................. 5
T S DIME CHEDULE ETAILED- .......................6
TECHNICAL TOURS.........................................10
SPONSORS......................................................... 10
O -S TE PN I LAN.................................................. 11
LIST OF EXHIBITORS..................................... 12
SOCIAL PROGRAM........................................ 13
APPROACH........................................................ 14
- The Power Engineering
Society of the
The
Aconf -
- Association for
Sensors and Measurement
antriebstechnik - Technical
Magazine for Engineering
Automation Valley Nordbayern
3
University of Erlangen-Nuremberg
niversity of Erlangen-Nuremberg
University of Erlangen-Nuremberg ( )
University of Erlangen-Nuremberg ( )
University of Erlangen-Nuremberg ( )
University of Erlangen-Nuremberg ( )
University of Erlangen-Nuremberg ( )
University of Erlangen-Nuremberg ( )
Zuerich ( )
Prof. Mebolt M.,Zuerich ( )
Prof. Meins J.,
Prof. Mi C.,
Dr. Moeckel A.,
Prof. Monkman G.,
Prof. Muetze A.,
Dr. Ombach G.,
Prof. Parspour N.,
Prof. Reinhart G.,
Dr. Risch F.,( )
Robens E.,im ( )
University of Erlangen-Nuremberg ( )
Prof. Suh I.-S.,
Prof. Thoms V.,
Paul Vahle GmbH & Co. ( )
University of Erlangen-Nuremberg ( )
Prof. Volk W.,
Prof. Werner R.,
Technical University Darmstadt ( )
Buehler Motor GmbH ( )
Prof. Covic G.,
Technische Hochschule Nuernberg ( )
Karlsruhe Institute of Technology ( )
University of Queensland ( )
Prof. Endisch C.,
Karlsruhe Institute of Technology ( )
Fraunhofer ( )
GreiffenbergerAntriebstechnik GmbH ( )
Prof. Gerling D.,
University of Hagen ( )
Prof. Haerri V.,
Prof. Hameyer K.,
University of
Dr. Junker S.,
4
9:00 NCC West
9:30 Opening Session Room Paris
11:00 NCC West
Room Paris Room London Room Zuerich Room Amsterdam
11:30
New Design forPermanent MagnetDrives
ContactingTechnologies
Potentials ofAdditive Manufacturing
Power Electronics forElectric Drives
1:00 NCC West
2:30 Simulation andModeling
ProductionOptimization withMethods of Industrie 4.0
Winding Technologiesfor Series Production
4:00 NCC West
4:45
Innovative Approachesfor Electric Drives
Further Considerationsof Production Planning
Stator WindingTechnologies
MagneticQuality Control
7:30 Evening Reception at Lederer Kulturbrauerei
Welcome Address
Room Paris Room London Room Zuerich Room Amsterdam
9:00 Innovations inInsulation Technologies
Production Impacts on
Soft Magnetic Materials
Substitution ofRare Earth Materials inElectric Drives
E-MOTIVEComponents forElectromobility
10:30 NCC West
11:15 Insulation Technologiesfor Mass Production
Loss Mechanisms inLaminations
Quality Assurance ofPermanent Magnets
E-MOTIVEFurther Considerationsfor Electromobility
12:45 NCC West
2:15 New Approaches forRotor Production
InnovativeProduction Methodsfor Laminations
Innovative
MeasurementTechnologies
E-MOTIVENew Control Methodsfor Electromobility
3:15 NCC West
:00 Closing Session Room
: End of Conference
, th, 2016
November 30 , 2016
December 1 , 2016
Welcome Coffee
Coffee Break
Lunch Break & Postersession
Coffee Break
Tab
leTo
p E
xh
ibitio
n
Coffee Break
Lunch Break & Postersession
Coffee Break
5
6
, 2016
9:30 Opening Session: Room Paris
11:00 Coffee Break in
11:30
12:00
12:30
1:00 Lunch Break & Postersession in
2:30
3:00
3:30
4:00 Coffee Break in
4:45
5:15
5:45
7:30 Evening Reception
The blue timeslots are marking the application-oriented presentations by industrial authors.
Modeling and Design of PM Retention Sleeves forHigh-Speed PM Synchronous Machines
The Influence of Geometrical Deviations ofElectrical Machine Systems on the Signal Qualityof the Variable Reluctance Resolver
Neidig N., Daimler AG (
Session 5: Room
Simulation and Modelling
Numerical Vibration Analysis of Electric Drives
D., CADFEM GmbH ( )
Analytic Model of Structural Effects in Toroid Coreswith Rectangular Cross Section
W.,
Optimization Algorithms for Maximizing theSlot Filling Factor of Technically FeasibleSlot Geometries and Winding Layouts
P., Technische Hochschule Ingolstadt (DE)
Session 1: Room
Innovative Approaches for Electric Drives
Developing Ultra Premium Efficiency (IE5 Class)Magnet-Free Synchronous Reluctance Motor
Dmitrievskii V., Ural Federal University, Yekaterinburg (
Control of synchronous-reluctance-motors withoutencoder for industrial applications
Weigel T., Siemens AG (
Session : Room London
Contacting Technologies
Quantification of the influence of varying electrodeshapes and materials on the thermo-crimping process
Spreng S., University of Erlangen-Nuremberg (
Contribution announced
Hagn P., AMADA MIYACHI Europe GmbH (DE)
Automated Quantification of Tool Wearing Conditionsusing Predictive Analytics
University of Erlangen-Nuremberg (
Session : Room
Production Optimization with Methods of Industry 4.0
Towards an inline quick reaction system foractuator manufacturing using data mining
Sand C., Robert Bosch GmbH (
Prediction of electric motor performance byin-line testing of permanent excited rotors
Abersfelder S., Bosch Rexroth GmbH (DE)BLDC-motor Production Process surveillance basedon Parameter Identification Method
Dr. Hillenbrand F., imc Messsysteme GmbH (
Session 10: Room London
Further Considerations of Production Planning
Guidelines for the production planning processunder uncertainty regarding the degree of automation
J.,
Robust Design Optimization of Electrical Machines andDrive Systems for High Quality Mass Production
Prof. Jianguo Z., University of Technology Sydney (AUS)
-
Session 9: Room
New Designs for Pemanent Magnet Drives
Design and Construction of a permanent magnetexcited Flux-Switching-Machine
M., Technical University of Darmstadt ( )
A., ( )
TIME SCHEDULE
7
Opening Session: Room Paris 9:30
Coffee Break in 11:00
Session Room Amsterdam
Power Electronics for Electric Drives
11:30
12:00
12:30
Lunch Break & Postersession in 1:00
Session 8 : Room Amsterdam
E|TEV
Enrichment and Analytics of Charing Transaction Data
von Hoffen M., (DE)
2:30
Single-Seater Vehicle Prototype Experiment Poweredby High Frequency Electric Field on anAsphalt-Paved Roadway
N.,
3:00
High Power three-phased Wireless Battery Charger withlow Stray Field fed by a single-phased Inverter
Dr. Turki F., Paul Vahle GmbH & Co. KG ( )
3:30
Coffee Break in 4:00
Session Room Amsterdam
Magnetic Quality Control
4:45
5:15
5:45
7:30Evening Reception
Flexible Printed Circuits: The wide range ofsmart connection
eefeldt S., GmbH ( )
Heraeus Deutschland GmbH & Co KG (DE)
Dr. Vijayakumar K., Malaviya National Institute of Technology (IN)
A Modified Power Electronic Converter Topologyfor Stand-Alone Photovoltaic Power Generation System
Innovative Material Packaging Solutions for superiorPower Electronics Devices; Example: Development of“Die Top System” for significant increase of efficiency
The blue timeslots are marking the application-oriented presentations by industrial authors.
Session 3: Room
Potentials of Additive Manufacturing (AM)
Laser Beam Melting Of NdFeB For The ProductionOf Rare-Earth Magnets
Urban N., University of Erlangen-Nuremberg ( )
Additive Manufacturing of a Lightweight Rotor for aPermanent Magnet Synchronous Machine
S., ( )
Additive Manufacturing of Electric Drives -Challenge, Chance or Trap?
Tremel J., Robert Bosch GmbH (DE)
Winding Technologies for Series Production
Multi Functional Winding Machine forExtreme Low Volume High Mix Environment
Kiefer D., MARSILLI (DE)
Innovative Needle Winding Approches fordistributed Stator Windings
Sell-Le Blanc F., Aumann GmbH (DE)
Versatile <<ALL IN ONE>> Winding Machine
., SMZ Wickel- und Montagetechnik AG (CH)
Session 7: Room Zürich
Winding Technologies for Series Production
Benefits of an universal winding machine
A.,
Simulation of the Assembly Process of theInsert Technique for Distributed Windings
Hofmann J., Karlsruhe Institute of Technology (
Session 11: Room
Stator Winding Technologies
Sensitivity Analysis on Tolerance InducedTorque Fluctuation of a Synchronous Machine
Neidig N., Daimler AG (
Methods for hyst losses determinations at non-standardring core geometries equ to Epstein measurements
A., thyssenkrupp Steel Europe AG (
-
Session 13: Room Paris Session 14: Room London
Production Impacts on Soft Magnetic Materials
9:00 Influences of separation and joining processes onsingle tooth laminated stacks
A.,
9:30 Numerical homogenization and simulationof a lamination stack
Baloglu M., University of Erlangen-Nuremberg (
10:00 Influence of Axial Mechanical Stress on theMagnetic Properties of Non-Oriented Electrical Steel
RWTH Aachen University (DE)
10:30 Coffee Break in
Session 16: Room Paris
Session 20: Room London
Innovative Production Methods for Laminations
11:15
11:45
Straightener Effects on Steel Magnetic Propertiesduring the Lamination Stamping Process
., Tempel Steel Co. (US)
12:15
Segmentation with Backlack
Stauble T., SWD AG (CH)
12:45 Lunch Break & Postersession in
Session 17: Room London
Loss Mechanisms in Laminations
2:15
Influence of cutting edge on core loss induced throughvarious manufacturing parameters
Schneider M., University of Erlangen-Nuremberg (
2:45
Eddy current loss analysis of coated permanent magnetsin synchronous machines
Gerlach T., Technische Hochschule Nuremberg (DE)
Improved Calculation of Iron Losses inLarge Salient-pole Synchronous Hydro-generators
Jacobs S., ArcelorMittal (LU)
4:
4: 0
Closing Words: Prof. Franke J., University of Erlangen- ( )
Best Paper Award:Prof. Feldmann K., University of Erlangen- ( )
Buehler Mechatronic Award: Muhr P., Buehler Motor GmbH, Nuremberg ( )
TIME SCHEDULE
8
The blue timeslots are marking the application-oriented presentations by industrial authors.
Innovations in Insulating Technologies
Insulation Technologies for Mass Production
Thin-walled injection molding for slot insulationof long stator sheet stacks
Kleine Büning M., RWTH Aachen University (DE)
Theoretical benefits of powder coatings regardingcopper fill factor of electric machines
Hoffmann B., University of Erlangen-Nuremberg ( )
Contribution Announced
Rasp R., CopperIng (DE)
Advanced insulation systems for cost-effective,high power density e-motors
., Victrex Technology (DE)
Impregnation of Hybrid and Electric Motors.Temperature process and quality effect formassive production
Motta C., bdtronic GmbH ( )
Kuschnerus M., ELANTAS Beck GmbH (DE)
Potentials of innovative flexible sheet insulationin rotating electric machines
Session 19: Room
New Approaches for Rotor Production
Increasing the energy efficiency of themagnetization process
Meyer A., University of Erlangen-Nuremberg (
In-Line strategies and methods to reducebalancing efforts within rotor productionfor electric drives
M., University of Erlangen-Nuremberg (
3:15 Coffee Break in
Closing Session: Room
TIME SCHEDULE
9
Session OTIVE : Room Amsterdam
Approaches towards Market Analysis andCommercialization of Electric In-wheel Motorsfor Light Vehicles
C., ( )
9:00
Interests and attitudes on the subject ofelectric mobility
Heß J., Chemnitz (DE)
9:30
10:00
Coffee Break in 10:30
: Room Amsterdam
11:15
11:45
12:15
12:45
Session 21: Room Zürich : Room Amsterdam
Innovative Measurement Technologies
Comparison analysis of the magnetic field and themagnetic force inside of an electromagnetic actuatorwith the use of an anchor measuring sensor
Heyder A., Robert Bosch GmbH (
2:15
2:45
Non-standard measurements and new technology forsoft magnetic material testing usingdigital feedback control
Siebert S., Dr. Brockhaus Messtechnik GmbH & Co. KG (DE)
4:
4:
5:00
Electric Powertrain for Helicopter Tail Rotor
Castellini L., (IT)
Buehler Mechatronic Award: Muhr P., Buehler Motor GmbH, Nuremberg ( )
Best Paper Award:Prof. Feldmann K., University of Erlangen- ( )
Closing Words: Prof. Franke J., University of Erlangen- ( )
Closing Key Note:
The blue timeslots are marking the application-oriented presentations by industrial authors.
Roadmap DC Fastcharging
Lautensack D., ABB Automation Products GmbH (DE)
Copper Diecast Rotors forHigh Efficiency Applications
Szilagyi P., Breuckmann GmbH & Co. KG (DE)
Future Aspects of Public Transportation –Solutions for E-Mobility for City Buses
Dr. Klett S., ZIEHL-ABEGG Automotive GmbH (DE)
Temperature Prediction of DC-Link Film CapacitorApplied in the Electrical Driving System ofElectric Vehicle
Wu C.,
Session 15: Room
Substitution of Rare Earth Materials in Electric Drives
Permanent magnets as critical materials inadvanced electric drives
Dr. ow A., Fraunhofer ISC IWKS (DE)
Experimental and calculational analysis of themodal behavior of squirrel cage rotors
J.,
Optimized electromagnetic and manufacturing designfor a BLDC-Motor substituting rare-earth magnets
A.,
Session 18: Room
Quality Assurance of Permanent Magnets
Model-based characterization of permanentmagnets with a 3D Hall-Sensor array
Cichon D., Fraunhofer IIS (DE)
From simple magnets to magnetic rotors – fast andprecise measurements for your production environment
Holzhey R., Innovent e.V. ( )
Quality control of permanent magnets used formotor control
Spasic S., SENIS AG (CH)
Components for Electromobility
Further Considerations for Electromobility
Control Methods for Electromobility
Efficient and compact electric drive systems withSiC-based power-electronics
Hofmann M., Fraunhofer IISB(
Coffee Break in 3:15
Closing Session: Room
and , 1 , 2016
The Organizing Committee sincerely thanks the following and companies for sponsoring
10
www.ieee.org
Technical Co-Sponsor
Effect of stress relief annealing condition on themicrostructure and magnetic properties ofnon-oriented electrical steel
-S.,
Holistic production analysis for actuatormanufacturing using data mining
Sand C., Robert Bosch GmbH (DE)
The Least Energy Demand Method as unique tool toevaluate and rate the energy efficiencyof the Electric Drives Production
Dr. Kreitlein S., University of Erlangen-Nuremberg (
Concept for a Virtual Process Data Linkage ofAssembly Stations and a Dynamic Envelope Curve forProcess Monitoring
Sand C., Robert Bosch GmbH (DE)
High Speed Flux Reversal Motor For Power Tool
.,
Magnetic Stray Field Measurementof Magnetic Specimen
., Robert Bosch GmbH (DE)
Rotary cutting of Electrical Steel Strip Rotary cutting ofElectrical Steel Strip in Stamp and Die Arrangement
., University of Erlangen-Nuremberg (
Floor Plan
Exhibition Centre Nuremberg
EElectric Drives Production
11
I &
Entrance
Info
Level 0
n
T s a
n
hr
Level 2
d
Level 1
rs
E| 2016 will take place at the NürnbergConventionCenter ( )West of NuernbergMesse.
The subway station is located at theentry of Nuremberg Exhibition.
You will find the
� Conference esk located n level 0�
� Conference in level 2
Table Top Exhibition
LIST OF EXHIBITORSE| 201
Marsilli & Co. S.p.AVia per Ripalta Arpina 1426012 Castelleone, Italywww.marsilli.it
Schlaeger M-Tech GmbHRitter-von-Eitzenberger-Str. 1095448 Bayreuth, Germanywww.schlaeger.com
MACHmotors GmbHFriedrichstr. 1091207 Lauf an der Pegnitz, Germanywww.hme-lauf.de
Quarzwerke GmbH HPF The Mineral EngineersKaskadenweg 4050226 Frechen, Germanywww.hpfminerals.com
CADFEM GmbHLeinfelder Straße 6070771 Leinfelden-Echterdingen, Germanywww.cadfem.de
Gebauer & Griller Metallwerk GesmbHMuthgasse 361194 Wien, Austriawww.griller.at
Universität Erlangen-Nürnberg - Lehrstuhl FAPSFürther Straße 246b90429 Nuremberg, Germanywww.faps.uni-erlangen.de
Stiefelmayer-Lasertechnik GmbH & Co. KGRechbergstr. 4273770 Denkendorf, Germanywww.stiefelmayer.de
Victrex Europa GmbHLanggasse 1665719 Hofheim am Taunus, Germanywww.
Breuckmann GmbH & Co. KGDieselstraße 26-2842579 Heiligenhaus, Germanywww.breuckmann.de
thyssenkrupp System Engineering GmbHRichard-Taylor-Str. 8928777 Bremen, Germanywww.thyssenkrupp.com
Wieland-Werke AGGraf-Arco-Str. 3689079 Ulm, Germanywww.wieland.de
bdtronic GmbHAhornweg 497990 Weikersheim, Germanywww.bdtronic.de
Matesy GmbHOtto-Schott-Straße 1307745 Jena, Germanywww.matesy.de
Magcam NVRomeinse Straat 18 Research Park Haasrode3001 Leuven, Belgiumwww.magcam.com
Senis AGNeuhofstraße 5a6340 Baar, Switzerlandwww.senis.ch
Scheugenpflug AGGewerbepark 2393333 Neustadt, Germanywww.scheugenpflug.de
imc Test & Measurement GmbHMax-Planck-Str. 22b61381 Friedrichsdorf, Germanywww.imc-frankfurt.de
C.E.I.A. SpaZona Ind. Viciomaggio 5452021 Arezzo, Italywww.
12
13
of the Evening Reception
07:30 :
Opening of the buffet
08:30 :
A regional buffet will be prepared and served.
Coypright City of Nuremberg
Bildrechte Stadt Nürnberg
The E| 201 vening is an official stand-upreception. Detailed technical discussions are guaranteedaccompanied by a carried franconian buffet.
Coypright City of Nuremberg
Nuremberg Convention and Tourist OfficeFrauentorgraben 390443 Nuremberg
Tel.: +49 (911) 2336 0http://www.tourismus.nuernberg.de/
For hotel recommendation please contact thetourist office Nuremberg:
Tel.: +49 (911) 2336 121http://www.hotel.nuernberg.de
or your accommodation several hotels are booked all over the city.For prices and reservation, please use the reservation form on ourwebsite www.edpc.eu.
Nürnberger Christkindlesmarkt
The famous Nürnberger Christkindlesmarkt will take place fromNovember 25A visit during E|DPC 2016 will be possible.
Copyright : City of Nuremberg
Copyright :Copyright :
Copyright Bilder: City of Nuremberg
14
, Nuremberg
, Nuremberg
PPROACH TO THE EVENING RECEPTIONTo reach the evening reception from :
- Take subway No. 1 in direction„Fürth Harthöhe“- Leave train at station„Bärenschanze“- Follow Sielstraße about 200 m in direction North-East
Approach by an all-electric bus will also be offered directlyfrom NCC West. Please follow the signs on site.
|
You may reach E| via car from
- A9: 52 Fischbach- A6: Take exit 59 - Langwasser- A73: Take exit 34 - ZollhausYour navigation system will find NuernbergMesse if you enter„Karl-S c h o e n l e b e n - S t r a s s e “ a s a d d r e s s o r M e s s e z e n t r u mas a special destination.
|
reach E| from
- Take subway no. 1 or 11 in direction “Langwasser“- Take Messe
reach E| from
- Take subway no. 2 in direction Roethenbach“- Take Main Station- Take subway no. 1 or 11 in direction “Langwasser“- Take s esse”
Information website vgn.de
Copyright Nuremberg Convention Center
|
|
U11U1
U2
Airport
Main Station
ConventionCenter
Lorenzkirche
Downtown
15
Munich
A9A3
A6
A73
Berlin
Wien
Frankfurt
Nuremberg
E|HomeSymposium
30. November - 01. Dezember 2016
Messe Nürnberg
Mit dem 1. E|Home-Symposium präsentiert das bayerische Technologiezentrum für privates Wohnen
(E|Home-Center) erstmals umfassend seinevom 30. Dezember 2016November bis 01.
Forschungsergebnisse. Diese entstammen einem interdisziplinären Forschungsverbund aus 13
Hochschulpartnern und mehr als 20 Unternehmen, der Fragestellungen rund um das Themenfeld des
ressourcenschonenden, selbstbestimmten und intelligenten Wohnens adressiert. Die Veranstaltung findet
im Rahmen des 3. Green Factory Bavaria Kolloquiums auf der statt.Messe Nürnberg
IntelligenteHeimvernetzung
InnovativeHeizsysteme
Ambient AssistedLiving
Usabilityim Smart Home
EnergieeffizientesWohnen
VERANSTALTUNG
THEMENSPEKTRUM
Komfort & Sicherheit
Energiemanagement Infotainment
© m
ark
us d
ehlz
eit -
Foto
lia.c
om
16
17
Green FactoryKolloquium
30. November - 01. Dezember 2016
Messe Nürnberg
Copyright: Mühlhäußer
Auf dem 3. Green Factory Bavaria Kolloquium präsentieren vom über 4030. November bis 01. Dezember 2016
Forschungsprojekte, getragen von Forschungsinstituten an 13 bayerischen Standorten in Zusammenarbeit mit
über 80 Industriepartnern, die Ergebnisse aus dem Forschungsverbund Green Factory Bavaria zum Thema
Energie- und Ressourceneffizienz in der Produktion. Die Veranstaltung findet statt.an der Messe Nürnberg
Am 30. November 2016 findet die Abendveranstaltung in Kooperation mit der E| 2016 statt, zu der alleDPC
Teilnehmer herzlich eingeladen sind.
Energieeffizienz inder Umformtechnik
Lösungen zurEffizienz-steigerung
Energieeffizienz imElektromaschinenbau
Energieeffizienz inder Kunststofftechnik
EnergieeffizienteSchweiß- und
NachhaltigeProduktions-
EffizienteAnlagentechnik zur
Energieeffizienzdurch Planung- und
Effiziente Prozess-und
Energieeffizienz inder
EffizienteFabrikplanung und
Einsatz effizienterAn-triebe und
30.09.
30.11.
01.12.
VERANSTALTUNG
PROGRAMMAbendveranstaltung
am 30.11.2016
Anmeldung unter:
www.greenfactorybavaria.de
| :
Fürther Straße 246 Tel: +49 ( )D - 90429 Nürnberg Fax: +49 (91 )service@edpc.
Are you interested in supporting the E|DPC conference and presenting your company or institute as asponsor? With the following packages the E|DPC is the ideal platform for the individual advertising of yourinnovative products and services:
ALUMINUM PACKAGE
1. You are listed as an officialAluminum Sponsor of theE|DP Conference 2016 withyour logo� on the E|DP Conference
homepage with a link toyour own homepage,
� the proceedings,� the program booklet,� the conference posters
presented on billboards atthe venue,
� on all organizational slidesshown at the conference,and
� all printed conferencerelated matters (call forpapers, invitation,conference program, etc.)which are distributedelectronically by email, onpaper by standard mail orat the conference.
Your company will be enabledto sponsor specific congressitems or give-aways; your logowill be printed on them, e.g.� congress bags� batch lanyards� writing pads� ball pens or pencils� others on request
COPPER PACKAGE
1. You are listed as an officialCo p p e r S p o n s o r o f t h eE|DP Conference 2016 withyour logo (see aluminiumpackage)
2. Your company will be enabledto sponsor specific congressitems or give-aways (seealuminium package).
3. Your company will be allowedto enclose companybrochures in the congress bag.
4. P a r t i c i p a t i o n f e e s f o remployees of your companyare reduced by 10 %.
5. Participation fees for guestswho are invited by you andwhich are paid by you arereduced by 10 %.
6. You may print oneadvertisement (color)� in the printed conference
proceedings and� in the program booklet
7. Your company will be enabledto sponsor specific congressevents, e.g.� coffee breaks� lunch breaks� congress dinner� others on request
GOLD PACKAGE
1. You are listed as an officialG o l d S p o n s o r o f t h eE|DP Conference 2016 withyour logo (see aluminiumpackage)
2. Your company will be enabledto sponsor specific congressitems or give-aways (seealuminium package).
3. Your company will be allowedto enclose companybrochures in the congress bag.
4. P a r t i c i p a t i o n f e e s f o remployees of your companyare reduced by 20 %.
5. Participation fees for guestswho are invited by you andwhich are paid by you arereduced by 20 %.
6. You may print oneadvertisement (color)� in the printed conference
proceedings and� in the program booklet
7. Your company will be enabledto sponsor specific congressevents (see copper package).
8. Your company will be enabledto present products andservices within the Table TopExhibition with a reduced feeof 20% (see exhibition fullservice package).
SPONSORING PACKAGESthe 6 e
Electric Drives Production- , 201 , Nuremberg, Germany
E|DPC-2016
Electric Drives Production
Conference and Exhibition
€ 2.000
€ 3.000
€ 5.000
18
VENUE
NürnbergMesse GmbH - WestMessezentrum, 90471 Nuremberg
Conference Co
phone: +49fax: +49
email: [email protected]: www.edpc.eu
E| 201 will take place at the Nuernberg Convention Center ( )For your accommodation several hotels are booked
all over the city. For prices and reservation, please use the reservation form on our websitewww.edpc.eu. Nuremberg boasts a unique mixture of tradition and modern times. Both peopleborn here and people who moved here appreciate its extraordinary quality of life. At the sametime, Nuremberg is a modern city with 500,000 inhabitants, and the centre of a prosperingEuropean metropolitan region with 2.5 million inhabitants. Its almost thousand years of historyare still obvious in its cityscape. Please find more information at www.nuernberg.de.
E| 201 will be completed by a xhibition. Companies, researchinstitutes and other organizations will be offered the opportunity to present their products andservices to all participants. For any further questions regarding E|please contact ( )
Are you interested in supporting E| 201 and presenting your company or organizationas a sponsor? E| 201 is the ideal platform for the individual advertising of yourinnovative products and services. For further information, please visit our websitewww.edpc.eu/sponsoring-partners
CONFERENCE FEE
Includes access to all conference sessions, access to the exhibition,participation at the evening reception, coffee and lunch breaks,conference proceedings (printed and electronic).
S o 8tandard Fee 9 0,- € plus VATReduced Fee* 580,- € pluso VAT
Voucher code: _______________
I also register for
o Evening includedReception ( )
* Reduced fee for International Program Committee members,speakers and university members. All prices plus .VAT
Copyright City of Nuremberg
Copyright Mesago Messe Frankfurt GmbH
By registering to the E| onference you agree to store,administrate and use your personal data for the generationof your invoice and for informing you continuously aboutthe latest research results and technology transfer activitiesof the Institute for Factory Automation and ProductionSystems ( ) of the University of Erlangen-Nuremberg
With the registration you also agree that photographs ofyour person be taken during the E| on . TheUniversity of Erlangen-Nuremberg shall have the non-exclusive, transferable, worldwide right in perpetuity toexploit such photographs in any and all forms, including, butnot limited to reporting on the aforementioned con .
Cancellations received in writing prior to , 201will be refunded less a 100 administration fee.After , 201 the fee will be fully charged.
By fax: +49 ( ) Online: www.edpc.euBy email: [email protected]
For the fax registration please use the following registration form:
Salutation ___________________ Title __________________________
First Name _________________________________________________
Last Name _________________________________________________
Company Name _____________________________________________
Department ________________________________________________
Street/Unit number __________________________________________
Postal Code ____________ City ________________________________
Country ___________________________________________________
Phone ____________________________________________________
Fax ______________________ Mobile phone _____________________
_
Conference Organizer:E| office, c/o - GmbHFuerther Straße 246b, D-90429 Nuremberg