+ All Categories
Home > Technology > Electric pallet truck weighing scales

Electric pallet truck weighing scales

Date post: 14-Dec-2014
Category:
Upload: tedjurca
View: 46 times
Download: 1 times
Share this document with a friend
Description:
World' best selling retrofit weighing scale for electric pallet trucks. Weighing accuracy from 0.1 % to 0.5 % of vehicle lifting capacity
2
ED2-EPT SkidWeigh Series Hydraulic Pressure Transducer Load Weight Measurement A RANGE OF SOLUTIONS TO SUIT YOUR MATERIAL HANDLING OPERATIONAL NEEDS The ED2-EPT SkidWeigh Series system is general application, heavy duty fully automatic electronic device that measures accurately the load weight on any type, model, lifting capacity or forks lenght of the electric pallet trucks. Automatic lift cycle of the load lift motion control and measured increase of hydraulic pressure in the lifting cylinder will activate the specific “weighing cycle” algorithm* at sample rate of 16000 readings. The final calculation of the readings taken during the measurement cycle will be converted into a load weight measurement that is visually presented to the operator via six digit large LED display. * Patent Pending Electric Pallet Truck On-board Weighing Systems
Transcript
Page 1: Electric pallet truck weighing scales

ED2-EPT SkidWeigh SeriesHydraulic Pressure Transducer Load Weight Measurement

A RANGE OF SOLUTIONS TO SUIT YOUR MATERIAL HANDLING OPERATIONAL NEEDS

The ED2-EPT SkidWeigh Series system is general application, heavy duty fully automatic electronic device that measures accurately the load weight on any type, model, lifting capacity or forks lenght of the electric pallet trucks.Automatic lift cycle of the load lift motion control and measured increase of hydraulic pressure in the lifting cylinder will activate the specific “weighing cycle” algorithm* at sample rate of 16000 readings. The final calculation of the readings taken during the measurement cycle will be converted into a load weight measurement that is visually presented to the operator via six digit large LED display.* Patent Pending

Electric Pallet Truck On-board Weighing Systems

Page 2: Electric pallet truck weighing scales

COMPACT SIZE & HEAVY DUTY - DESIGNED FOR MATERIAL HANDLING VEHICLE

Pressure Transducer

MATERIAL HANDLING DEALER

ED2-EPT-V2-2012

Clear cover, impact resistant

Compact PC board

Liquid tight fitting for

external cable

Universal power supply input from

12 to 55 V DC

Front cover with seamless foam-in-place gasket

assures watertight and dust-tight seal

Large bright six LED digits display

Technical Data

- Voltage from 12 to 55 V DC- Operating current 60mA- Technology, micro controller- RS-232 port- Readout type, large six LED digits- Weighing range up to 5000 kg or lb- Bright red display intensity- Enclosure ABS, 120 x 80 x 55 mm- Weight, 0.6kg- Operating temperature -40 C to + 70C- Accuracy +/- 01% to 0.5 % of vehicle lifting capacity

Pressure Transducer (Swiss Made)- Port connection, male 1/4”-18 NPT- Built in pressure snubber- NEMA 4X protection- Reverse polarity protection- Over voltage protection- Short circuit protection- Housing material, Stainless steel AISI

303- Weight 95 grams- Installation, unrestricted

- Single weighing channel- Lift-n-weigh load weighing procedure- Graduation, standard 5

Optional Features- Total accumulative load weight- On-board printer RS232- Onboard label printer RS232 - Bluetooth connectivity- Overload warning- Automatic zero weight re-calibration- Main On /OFF powere switch

Order Number:ED2-EPT

Hydraulic cylinder lift motion control


Recommended