+ All Categories
Home > Documents > ELECTRIC SCREWDRIVERS · ELECTRIC SCREWDRIVERS CATALOG / FAB & RAF SERIES ANGHD8 (FAB) ANGHD9...

ELECTRIC SCREWDRIVERS · ELECTRIC SCREWDRIVERS CATALOG / FAB & RAF SERIES ANGHD8 (FAB) ANGHD9...

Date post: 15-Mar-2020
Category:
Upload: others
View: 5 times
Download: 0 times
Share this document with a friend
28
ELECTRIC SCREWDRIVERS CATALOG 2014 PRECISION SCREW TIGHTENING THE AFFORDABLE SOLUTION
Transcript
Page 1: ELECTRIC SCREWDRIVERS · ELECTRIC SCREWDRIVERS CATALOG /  FAB & RAF SERIES ANGHD8 (FAB) ANGHD9 (RAF) Model Torque Screw RPM Start Weight L x Ø Style in/lbs size max option lb in

ELECTRICSCREWDRIVERS

CATALOG 2014

PRECISION SCREW TIGHTENINGTHE AFFORDABLE SOLUTION

Page 2: ELECTRIC SCREWDRIVERS · ELECTRIC SCREWDRIVERS CATALOG /  FAB & RAF SERIES ANGHD8 (FAB) ANGHD9 (RAF) Model Torque Screw RPM Start Weight L x Ø Style in/lbs size max option lb in

ELECTR IC SCREWDRIVERS CATALOG / www.ko lverusa . com

F A B & R A F S E R I E S

ANGHD8 (FAB)ANGHD9 (RAF)

Model Torque Screw RPM Start Weight L x Ø Stylein/lbs size max option lb in

FAB03SS/FR 0.4–4.4 M2.5 650 Lever 1.0 8.9x1.3 Inline

FAB10RE/FR 0.4–7.0 M2.5 1000 Lever 1.1 8.9x1.3 Inline

FAB12RE/FR 1.8–10.6 M3 1000 Lever 1.1 8.9x1.3 Inline

FAB12PS/FR 1.8–10.6 M3 1000 Push start 1.1 8.9x1.3 Inline

FAB12PP/FR 1.8–10.6 M3 1000 Trigger 1.2 7.9x5.9x1.3 Pistol grip

FAB12PP/FR/U 1.8–10.6 M3 1000 Trigger 1.2 7.9x5.9x1.3 Pistol grip with top connector

FAB18RE/FR 2.6–16.0 M4 650 Lever 1.1 8.9x1.3 Inline

FAB18PS/FR 2.6–16.0 M4 650 Push start 1.1 8.9x1.3 Inline

FAB18PP/FR 2.6–16.0 M4 650 Trigger 1.2 7.9x5.9x1.3 Pistol grip

FAB18PP/FR/U 2.6–16.0 M4 650 Trigger 1.2 7.9x5.9x1.3 Pistol grip with top connector

RAF32NS/FR 6.2–28.3 M5 1000 Lever 1.4 9.7x1.6 Inline

RAF32PS/FR 6.2–28.3 M5 1000 Push start 1.4 9.7x1.6 Inline

RAF32PP/FR 6.2–28.3 M5 1000 Trigger 1.5 7.9x5.9x1.3 Pistol grip

RAF32PP/FR/U 6.2–28.3 M5 1000 Trigger 1.5 7.9x5.9x1.3 Pistol grip with top connector

RAF38NS/FR 7.9–33.6 M5 650 Lever 1.4 9.7x1.6 Inline

RAF38PS/FR 7.9–33.6 M5 650 Push start 1.4 9.7x1.6 Inline

RAF38PP/FR 7.9–33.6 M5 650 Trigger 1.5 7.9x5.9x1.3 Pistol grip

RAF38PP/FR/U 7.9–33.6 M5 650 Trigger 1.5 7.9x5.9x1.3 Pistol grip with top connector

FAB & RAF ScrewdriversTORQUE UP TO 33.6 in/lbs

FAB series electric screwdrivers are our “best sellers” for the electronic industry. RAF series screwdrivers aredesigned to meet higher torque applications.

Their advanced ergonomic design, ease of use, high accuracy and durability have made these drivers thestandard by which all others are measured. They are lightweight, compact, powerful and come standardwith ESD-safe housing certified to SP method 2472 (Ericsson approved). These screwdrivers are

available in an inline body style with either a lever start or push to start or in a pistol grip witha trigger start (also available with the cord coming out from the top - U option) and different

speeds, for different assembly requirements.

The torque is set externally: an adjusting nut controls output torque by changing the clutch springcompression. A reference scale will indicate the torque setting. The low voltage 30 VDC rareearth motors combine high performances and long life. Replacing carbon brushes andregreasing of reduction gears every 400,000 cycles is all you need for maintenance.

The motor works in combination with a control unit. The electronic control circuit cutsthe power supply to the motor in response to the clutch action, as soon as the pre-settorque has been reached. In addition the controller can be supplied with torquereached signal, lever signal, remote start and reverse (see page of control units for all the details) and with ACE screw counter unit.

All FAB and RAF drivers come standard with ESD-safe body, suspension bail and 8.2 ft connection cable. Spiral cable available on request.

The new heavy duty cables and connectors, developed for robotic applica-tions, are made of dissipative material for safe use in an ESD environment.

Page 3: ELECTRIC SCREWDRIVERS · ELECTRIC SCREWDRIVERS CATALOG /  FAB & RAF SERIES ANGHD8 (FAB) ANGHD9 (RAF) Model Torque Screw RPM Start Weight L x Ø Style in/lbs size max option lb in

www.ko lverusa . com / ELECTR IC SCREWDRIVERS CATALOG 1

F A B & R A F S E R I E S

FAB & RAF Control UnitsAll Kolver screwdrivers work in combination with a control unit acting as an AC to DC transformer andtorque controller. The electronic control circuit cuts the power supply to the motor as soon as thepre-set torque has been reached.

The EDU1FR control units for FAB and RAF screwdrivers feature maintenance free state-of-the-artelectronics, no wearing components, a circuit design suitable to both lever start and push start drivers,and protection against current overload up to 10A. This design results in very low current to the driver’sstart switch and clutch switch to extend their life indefinitely. Additional features:

• Suitable for universal power supply from 90 to 260V ac 50/60 hz.• Slow start (0-2 seconds) and RPM (60% to 100%).• Visual indicators (green-red) for power on/off and clutch action.• Reduced weight (1.3 lbs) and compact size for easy placement.• M12 waterproof connector with silver and gold contacts for perfect conductivity.

The EDU1FR/SG controller features additional circuits wired to one connector in the back panel: output24V for torque reached and lever signals; input start and reverse contacts. A double output connector(DOCK01) is also available for operators using two screwdrivers on the same working area (only FABand RAF series). One end of this device is to be connected to the controller (cable included), the otherend to the drivers. The screwdrivers may not be used at the same time.

Model Features Dimensions Weight Screwdriverin lb

EDU1FR In: 90-260 Vca 5.4x4.6x2.6 1.3 All FAB & RAF

Out: 18-30 Vcc power 120VA

slow start and adjustable speed

EDU1FR/SG Input: start and reverse contacts 5.4x4.6x2.6 1.3 All FAB & RAF

Output: torque reached and lever signal

EDU1FR/ACE EDU1FR/SG with ACE screw counter 5.4x4.6x7.4 2.1 All FAB & RAF

EDU1CL/FR Blank controller 5.4x4.6x2.6 1.3 All FAB & RAF

ACE SCREW COUNTERMODEL # ACE 101/FR

EDU1CL/FRDOUBLE OUTPUT DEVICEWITH CABLEMODEL # DOCK-01

BACK CONNECTOREDU1FR/SG ONLY

TLS POSITIONINGARM

Page 4: ELECTRIC SCREWDRIVERS · ELECTRIC SCREWDRIVERS CATALOG /  FAB & RAF SERIES ANGHD8 (FAB) ANGHD9 (RAF) Model Torque Screw RPM Start Weight L x Ø Style in/lbs size max option lb in

TUBE NUT & CROWS FOOT TORQUE REACTIONSUPPORT HANDLE

OPTIONAL RIGHT ANGLEHEADS–1/4” Hex; 3/8” sq. dr.

PUSH-TO-START DRIVER

ELECTR IC SCREWDRIVERS CATALOG / www.ko lverusa . com2

P L U T O S E R I E S

Model Torque RPM Weight Dimensions Torque Stylein/lbs max lb in AdjustmentEDU2AE

PLUTO3D 2.6–26.0 1200 1.1 8.5x1.6 Current Inline

PLUTO3P 2.6–26.0 1200 1.1 5.9X5.9X1.8 Current Pistol

PLUTO3P/U 2.6–26.0 1200 1.1 5.9X5.9X1.8 Current Pistol/Cord Up

PLUTO3P/S 2.6–26.0 1200 1.3 5.9X5.9X1.8 Current Inline/Push-start

PLUTO3FR 4.4–31.0 1300 1.5 10.7x2.0 Clutch Inline

PLUTO5FR 6.2–44.0 1000 1.5 10.7x2.0 Clutch Inline

PLUTO6D 4.4–53.0 920 1.1 8.5x1.6 Current Inline

PLUTO6P 4.4–53.0 920 1.1 5.9X5.9X1.8 Current Pistol

PLUTO6P/U 4.4–53.0 920 1.1 5.9X5.9X1.8 Current Pistol/Cord Up

PLUTO6P/S 4.4–53.0 920 1.3 5.9X5.9X1.8 Current Inline/Push-start

PLUTO7FR 13.3–62.0 600 1.5 10.7x2.0 Clutch Inline

PLUTO10D/N 18–88.0 600 1.1 8.5x1.6 Current Inline

PLUTO10P/N 18–88.0 600 1.1 5.9X5.9X1.8 Current Pistol

PLUTO10P/U/N 18–88.0 600 1.1 5.9X5.9X1.8 Current Pistol/Cord Up

PLUTO10P/S 18–88.0 600 1.3 5.9X5.9X1.8 Current Pistol/Push-start

PLUTO15D 18–132.0 320 1.1 8.5x1.6 Current Inline

PLUTO15P/N 18–132.0 320 1.1 5.9X5.9X1.8 Current Pistol

PLUTO15P/U/N 18–132.0 320 1.1 5.9X5.9X1.8 Current Pistol/Cord Up

PLUTO15P/S 18–132.0 320 1.1 5.9X5.9X1.8 Current Inline/Push-start

PLUTO Screwdrivers – Current Control & Clutch StyleTORQUE UP TO 310 in/lbs

Kolver’s experience in torque tools has led to the creation of thePluto Screwdrivers, the most versatile and cost effective DC tools

on the market. Pluto Series features an innovative electricmotor with low inertia and minimal friction for extremely long

life, coupled with planetary gearboxes built with long lastingcomposite materials.

Models range in torque from 2.5–310 in/lbs, and are available inpistol or inline styles; lever, trigger, or push-to-start. All models areESD safe.

New this year are our Clutch Series Pluto Drivers (FR models), usingadjustable clutch technology to meet torque required. Clutch unitsfeature increased speed, and increased accuracy when usedon multiple joint configurations.

Page 5: ELECTRIC SCREWDRIVERS · ELECTRIC SCREWDRIVERS CATALOG /  FAB & RAF SERIES ANGHD8 (FAB) ANGHD9 (RAF) Model Torque Screw RPM Start Weight L x Ø Style in/lbs size max option lb in

www.ko lverusa . com / ELECTR IC SCREWDRIVERS CATALOG 3

P L U T O S E R I E S

EDU2AE/TOP/TA

EDU2AE/TOP 8 P-set controller, parts counting, 9.3X4.7X8.2 8.8Torque display, 15 I/O, USB port

EDU2AE/TOP/E 8 P-set controller, parts counting, 9.3X4.7X8.2 8.8Torque display, 15 I/O, Ethernet port

Model Features Dimensions Weightin lb

EDU2AE Programmable with user interface screens 7.7x6.7x4.3 7.5

EDU2AE/HP Programmable with interface screen, torque value 7.7x6.7x4.3 8.2and screw counting

EDU2AE/HP/E EDU2AE with Ethernet connection 7.7x6.7x4.3 8.2

EDU2AE/ACE EDU2AE complete with screw counting device 7.7x6.7x9.5 9.3

PLUTO Control Units – Single, Dual, Multi-TorqueAll Kolver screwdrivers work in combination with a control unit acting as an AC to DC transformerand torque controller. The electronic control circuit cuts the power supply to the motor as soon as thepre-set torque has been reached.

For the Pluto Series, the EDU2AE Series Controllers give you all the advantages of precision torquecontrolled electric tools at a fraction of the price of transducerized tools. Our microprocessor based unitcuts the power to the motor calculating the precise torque level in response to 3 parameters; voltage,frequency, and current.

Features of the EDU2AE:• One controller to handle torque from

2.6 to 308 in/lbs.• Hard or Soft joint setting; Slow start or

Soft stop setting.• Adjustable rundown speed.• Min time – Max time target setting.• Auto reverse, with adjustable speed, and

adjustable torque settings.• Programming in four languages available.• Lever start and torque reached signal outputs,

remote start and reverse contacts.

The EDU2AE/TOP multiple torque system is designed to expand the functionality of the PLUTO screw-driver by enabling multiple torque settings (up to 8) using one controller and one driver.Main features:• One controller for a torque range of 2.6 to 310 in/lbs, depending on driver used.• Easy to program user interface screens.• 8 independent P-sets; with one PLUTO Driver you can replace up to 8 conventional screwdrivers.• Each program can be adjusted: Torque, Speed, Hard/Soft Joint, Number of Screws to be tightened,

Number of Rejects allowed, Minimum screwing time, Maximum screwing time, Ramp (slow start), Auto-reverse, Program sequence, Soft stop.

• Password protected.• Statistics menu with summary of number of screws, and number of assemblies completed.• 15 input and 11 output connectors: all functions can also be controlled remotely.• For retrieval of rundown data; USB Port standard; Optional Ethernet Port available.• Optional Switch Box, Socket/Bit Tray, or Bar Code Scanner for program activation.

Features of the EDU2AE/HP:• All of the EDU2AE settings, plus:• Threadcutting (prevailing torque) capability.• Torque number display on screen.• Min/Max torque setting.• Left or Right hand rotation.• Password Protection.• Self (internal) calibration capability.• Nm or in/lbs setting.• Min/Max Torque window setting.• Screw and batch counting capability.• Serial or Ethernet port for data download

capability.

EDU2AE

EDU2AE/HP

EDU2AE/TOP

BAR CODE SCANNER

DOUBLE OUTPUT DEVICEWITH CABLEMODEL # DOCK-04

SWBX-88/TOP SWITCH BOX

CBS 880/TOP BIT/SOCKET TRAY

Page 6: ELECTRIC SCREWDRIVERS · ELECTRIC SCREWDRIVERS CATALOG /  FAB & RAF SERIES ANGHD8 (FAB) ANGHD9 (RAF) Model Torque Screw RPM Start Weight L x Ø Style in/lbs size max option lb in

ELECTR IC SCREWDRIVERS CATALOG / www.ko lverusa . com4

C A S E R I E S

Model Torque RPM L x Ø Output Controlin/lbs max in unit

PLUTO3CA 2.6–26.5 1200 6.3x1.6 Hex. 1/4” EDU2AE/HP

PLUTO10CA/N 6.3x1.6 Hex. 1/4”

PLUTO15CA/N 6.3x1.6 Hex. 1/4”

PLUTO20CA 22.0–177.0 210 7.8x1.9 Sq. 3/8” EDU2AE/HP

PLUTO35CA 26.5–310.0 140 8.1x2.2 Sq. 3/8” EDU2AE/HP

PLUTO3CA/FN 2.6–26.5 1200 10.1x1.6 Hex. 1/4” EDU2AE/HP

PLUTO10CA/FN 10.1x1.6 Hex. 1/4”

PLUTO15CA/FN 10.1x1.6 Hex. 1/4”

PLUTO20CA/FN 22.0–177.0 210 10.9x1.6 Sq. 3/8” EDU2AE/HP

PLUTO3CA/FN 2.6–26.0 1200 6.3x1.6 Hex. 1/4” EDU2AE/HP

PLUTO6CA 4.4–53.0 920 6.3x1.6 Hex. 1/4” EDU2AE/HP

PLUTO6CA/FN 4.4–53.0 920 6.3x1.6 Hex. 1/4” EDU2AE/HP

PLUTO10CA/N 18–88.0 600 6.3x1.6 Hex. 1/4” EDU2AE/HP

PLUTO15CA/N 18–132.0 320 6.3x1.6 Hex. 1/4” EDU2AE/HP

PLUTO20CA 23–177.0 210 6.3x1.6 Hex. 1/4” EDU2AE/HP

PLUTO35CA/FN 27–310.0 140 6.3x1.6 Sq. 3/8” EDU2AE/HP

KBL04/CA 0.4–4.0 1000 10x1.5 Hex. 1/4” EDU1BL/SG

KBL15/CA 2.6–13.0 1000 10x1.5 Hex. 1/4” EDU1BL/SG

KBL30/CA 6.2–26.0 1000 10x1.7 Hex. 1/4” EDU1BL/SG

PLUTO20CA/SR 23.0–177.0 210 6.3x1.6 Hex. 1/4” EDU2AE/HP

PLUTO35CA/SR 27.0–310.0 140 6.3x1.6 Sq. 3/8” EDU2AE/HP

FAB03CA 0.4–4.4 650 9.0x1.6 Hex. 1/4” EDU1FR/SG

FAB10CA 0.4–7.0 1000 9.0x1.6 Hex. 1/4” EDU1FR/SG

FAB12CA 1.8–10.6 1000 9.0x1.6 Hex. 1/4” EDU1FR/SG

FAB18CA 2.6–16.0 650 9.0x1.6 Hex. 1/4” EDU1FR/SG

RAF32CA 6.2–28.3 1000 9.7x1.6 Hex. 1/4” EDU1FR/SG

RAF38CA 8.0–33.6 650 9.7x1.6 Hex. 1/4” EDU1FR/SG

5.3–35.417.7–88.5

5.3–60.217.7–132.0

EDU2AE/HP

EDU2AE/HP

EDU2AE/HP

EDU2AE/HP

5.3–35.417.7–88.5

5.3–60.217.7–132.0

400600

220320

400600

220320

PLUTO..CA/FNTELESCOPICSPINDLE

CA ScrewdriversThe CA screwdrivers are designed for automated and fixtured applications. Special wiring and dedicated controllers

are equipped with electric signals and contacts for immediate and easy interface. The ideal alternative topneumatic drivers, they feature a long life maintenance free electric motor with a unique electronic torquecontrol system for high accuracy throughout a wide torque range (up to 310 in/lbs); an aluminum body, for

easy and quick clamp, supplied with 8.2 ft cable.

The PLUTO..CA/FN Series incorporates the PLUTO DC-controlled electric screwdriver design, suppliedin an inline aluminum housing for flange mounting applications. The DC motor and solid state

controls of the PLUTO are ideal for automated high volume/high duty applications.

Flange and telescopic spindle available together or separately.

Page 7: ELECTRIC SCREWDRIVERS · ELECTRIC SCREWDRIVERS CATALOG /  FAB & RAF SERIES ANGHD8 (FAB) ANGHD9 (RAF) Model Torque Screw RPM Start Weight L x Ø Style in/lbs size max option lb in

Model Features Dimensions Weight Screwdriverin lb

EDU2AE Programmable with user interface screens 7.7x6.7x4.3 7.5 PLUTO

EDU2AE/HP Programmable with user interface screen, torque value 7.7x6.7x4.3 8.2 PLUTOand screw counting

EDU2AE/HP/E EDU2AE with Ethernet connection 7.7x6.7x4.3 8.2 PLUTO

EDU2AE/TOP 8 P-set controller, parts counting, 9.3x4.7x8.2 8.8 PLUTOTorque display, 15 I/O, USB port

EDU2AE/TOP/E 8 P-set controller, parts counting, 9.3x4.7x8.2 8.8 PLUTOTorque display, 15 I/O, Ethernet port

EDU1BL/SG RPM and slow start adjustment 5.4x4.6x2.6 1.2 KBL

www.ko lverusa . com / ELECTR IC SCREWDRIVERS CATALOG 5

C A S E R I E S

CA Control UnitsAll Kolver Current Controlled screwdrivers work in combination with a control unit acting as an AC toDC transformer, and torque controller. Our exclusively designed circuitry monitors the power supply, andcuts power to the driver motor once the pre-set torque has been reached.

For the Pluto CA Series, the EDU 2AE Series controllers give the precise torque control for all automatedoperations at a fraction of the cost of transducer tools. Our unique design calculates the correct torquein response to three parameters; voltage, frequency, current draw.

Additional features:• One controller only for a torque range from 2.6 to 310 in/lbs.• Easy to progam user interface screens.• Soft or hard joint option.• Slow start, adjustable RPM, Soft stop options.• Autostop on elapsed time, automatic reverse options.• Torque reached signal, and lever start signal.• Remote start and Reverse start contacts.• Optional Serial port or Ethernet port download capabilities.

The EDU1BL/SG and EDU1FR/SG control units are designed to work with our KBL Brushless drivers.These KBL drivers feature a maintenance free brushless motor, and the EDU controllers feature state-of-the-art electronics with zero wearing components.

Controllers come standard with:• Slow start adjustment.• RPM adjustment (60% to 100% of rated speed).• Visual indicators (red-green) for power and torque.• Input: Start and Reverse contacts.• Output: 24 V DC for torque reached and lever signals.

Kolver also features Multi-Spindle units, including Pluto or Brushless controllers, CA spindles, all customfixturing, and master PLC.

Contact Factory for full details and quotations.

EDU2AE

EDU2AE/HP

MULTI SPINDLE

EDU2AE/TOP

Page 8: ELECTRIC SCREWDRIVERS · ELECTRIC SCREWDRIVERS CATALOG /  FAB & RAF SERIES ANGHD8 (FAB) ANGHD9 (RAF) Model Torque Screw RPM Start Weight L x Ø Style in/lbs size max option lb in

ELECTR IC SCREWDRIVERS CATALOG / www.ko lverusa . com6

B R U S H L E S S S E R I E S

AUTOMATIONMODEL

Model Torque RPM Weight L x Ø Controllerin/lbs max lb in

KBL04FR 0.35–3.5 650-1000 1.1 10.0x1.4 EDU1FR or EDU1BL/FR

KBL15FR 3.5–13.2 650-1000 1.1 10.0x1.4 EDU1FR or EDU1BL/FR

KBL30FR 6.2–25.6 650-1000 1.4 10.6x1.6 EDU1FR or EDU1BL/FR

KBL04FR/S 0.35–3.5 650-1000 1.1 10.0x1.4 EDU1BL/SG

KBL15FR/S 3.5–13.2 650-1000 1.1 10.0x1.4 EDU1BL/SG

KBL30FR/S 6.2–25.6 650-1000 1.4 10.6x1.6 EDU1BL/SG

BRUSHLESS ScrewdriversTORQUE 0.35 TO 26.6 in/lbs

KBL Series electric screwdrivers feature state-of-the-art brushless motors and our patented mechanicalclutch for smooth torque operation. This combination is the perfect solution to delicate torque

fastening applications where precise tightening repeatability is critical, and zero emissions ofparticulate into the working environment is allowed.

KBL Series can be used with our new EDU1BL Controller, or our full feature EDU1FR Model,featuring adjustable speed control. SG Style controllers are also available for remote start(automated) applications.

The new KBL Series feature a unique ergonomic inline design, and high quality longlasting Swiss brushless motors. Magnetic start and clutch switches guarantee bettertorque results, and much longer life when compared to other brushless drivers.

All KBL Brushless Drivers come with standard ESD-safe high impact plasticbodies, and 8’ ESD-safe robotic grade cable, and suspension bail. The KBL serieswork in combination with our standard EDU 1FR Series Controllers. Thismeans all existing FAB and RAF customers can replace their existingdrivers with the KBL brushless series without having to replace

the controller.

The KBL “S” Series has the same features as our standard drivers, withincreased capability. The “S” Series has an 8-pin cable, allowing forslow start and RPM adjustment. In conjunction with our Model #EDU1BL/SG Controller, the “S” Series can also be used with our

ACE Screw Counter.

All “S” Series drivers come with standard ESD-safe highimpact plastic bodies, 8’ ESD-safe robotic grade cable,and suspension bail.

Page 9: ELECTRIC SCREWDRIVERS · ELECTRIC SCREWDRIVERS CATALOG /  FAB & RAF SERIES ANGHD8 (FAB) ANGHD9 (RAF) Model Torque Screw RPM Start Weight L x Ø Style in/lbs size max option lb in

www.ko lverusa . com / ELECTR IC SCREWDRIVERS CATALOG 7

B R U S H L E S S S E R I E S

BRUSHLESS Control UnitsAll Kolver screwdrivers work in combination with a control unit acting as an AC to DC transformer andtorque controller. The electronic control circuit cuts the power supply to the motor as soon as thepre-set torque has been reached.

The EDU1BL, EDU1FR, and EDU1BL/SG control units for KBL screwdrivers feature maintenance freestate-of-the-art electronics with no wearing components.

The EDU1BL/SG controller additionally features slow start (0-2 sec), adjustable speed (60% to 100%)and visual indicators (green-yellow-red) for power on/off, torque reached or not reached.

All standard KBL screwdrivers work in combination with either our EDU1FR, or EDU1BL Controllers.

All “S” Series KBL screwdrivers work with our EDU1BL/SG controller. These controllers feature mainte-nance free state-of-the-art electronics, no wearing components, and protection against current overloadup to 10A. The SG model features 4 Input and 3 Output connections, to identify motor start, motor stop,and reverse input. 24V DC Output identifies lever start, and torque reached signals.

Additional features:• Suitable for universal power supply from 90 – 260V ac 50/60 hz.• Slow start (0-2 seconds) and adjustable RPM (60% - 100%). • Visual indicators (green-red) for power off/on and clutch action.• Reduced weight (1.3 lbs) and compact size for each placement. • M12 waterproof connector with silver and gold contacts for perfect conductivity.

ACE SCREW COUNTERMODEL # ACE101/BL

TLS POSITIONINGARM

Model Features Dimensions Weight Screwdriverin lb

EDU1BL In: 90-260 Vca OUT: 36 VDC-120VA-adjustable torque 5.3x7.1x2.6 2.1 KBL04FR, 15FR & 30FR

EDU1BL/SG Slow start and ajustable speed, INPUT: start and reverse 5.3x7.1x2.6 2.1 KBL04FR/S, 15FR/S & 30FR/Scontacts, external stop and L/H torque switchOUTPUT: torque reached & lever & error signals

BACK CONNECTOREDU1BL/SG ONLY

EDU1FR

EDU1BL

EDU1BL/SG“S” Series Drivers Only

EDU1FR In: 90-260 Vca OUT: 18-30 VDC-slow start & adjustable speed 5.4x4.6x2.6 1.3 All KBL Series

Page 10: ELECTRIC SCREWDRIVERS · ELECTRIC SCREWDRIVERS CATALOG /  FAB & RAF SERIES ANGHD8 (FAB) ANGHD9 (RAF) Model Torque Screw RPM Start Weight L x Ø Style in/lbs size max option lb in

ELECTR IC SCREWDRIVERS CATALOG / www.ko lverusa . com8

E L E C T R I C S C R E W D R I V E R S W I T H T & A

Model Torque RPM Componentsin/lbs max

TAA3D/TOP 2.6–26.0 1200 PLUTO3D, EDU2AE/TOP/TA

TAA6D/TOP 4.4–53.0 920 PLUTO6D, EDU2AE/TOP/TA

TAA10D/TOP 18.0–88.0 600 PLUTO10D, EDU2AE/TOP/TA

TAA15D/TOP 18.0–132.0 320 PLUTO15D, EDU2AE/TOP/TA

TAA20CA/TOP 22.0–177.0 210 PLUTO20CA, EDU2AE/TOP/TA

Electric Screwdrivers – with Torque & Angle ControlIndustrial tightening may require different control strategies and solutions. The most common cases are:torque control with angle monitoring and angle control with torque monitoring. Kolver Multi-TorqueTorque & Angle controllers can manage all such strategies, with up to 8 individual P-sets.

The Torque/Angle ControlThe main parameters to be controlled are the tightening torque applied to the screw and the rotationangle of the screw, with priority to the torque value. If the torque and angle values found by the systemare within the programmed settings, the motor stops automatically and the indication of OK cycle(green led turned on) is given, otherwise an error (red led) is generated.

The Angle ControlThe main parameters to be controlled is the rotation angle of the screw. The motor stopsautomatically when the pre-set angle value has been reached and an indication of OK cycle (green ledturned on) is given.

Main features:• Easy to Program User Interface Screens• Password Protected• Torque Value in Nm or In/lbs• Angle Value in degrees• 8 Individual P-sets for custom rundown strategies

including:Min/Max Torque ValueMin/Max Angle ValueRundown SpeedSlow Start/Soft StopHard/Soft /JointMin/Max Rundown TimeMax Torque (Threadcutting) if requiredAuto Reverse if required

• 6 Individual Programming Strategies including:Torque OnlyInput (Remote Start)TorqueLever TorqueAngle OnlyInput (Remote Start) AngleLever Angle

Page 11: ELECTRIC SCREWDRIVERS · ELECTRIC SCREWDRIVERS CATALOG /  FAB & RAF SERIES ANGHD8 (FAB) ANGHD9 (RAF) Model Torque Screw RPM Start Weight L x Ø Style in/lbs size max option lb in

www.ko lverusa . com / ELECTR IC SCREWDRIVERS CATALOG 9

M I T O S E R I E S

TLS POSITIONING ARMOPTIONAL RIGHT ANGLEHEADS –1/4” Hex OPENING

Features of the EDU2AE/TOP/MITO:• Up to eight (8) P-sets available• 1 – 99 Screws per program• Programmable in MITO 15L (ultra low torque)

or 15H (high torque setting)• Adjustable torque• Hard or Soft joint configuration• Adjustable Brake (slow speed) time• Adjustable Ramp (slow start) time• Adjustable speed control (850 – 100 RPM)• Adjustable Minimum rundown time setting• Adjustable Maximum rundown time setting• Auto reverse setting with adjustable speed

and adjustable torque• Prevailing Torque (thread cutting) capability• Programmable left or right rotation

• Unscrew lockout capability• Programmable controller calibration• In/lb or Nm setting• Adjustable Minimum torque setting• Adjustable Maximum torque setting• Barcode programming capability• Programmable sequencing• Six language settings• Password protected

Features of the EDU2AE/TOP/MITO/TA:• All of the above features• Programmable angle detection• Adjustable Minimum angle setting• Adjustable Maximum angle setting

Model Torque RPM Weight Dimensions Torque Stylein/lbs max lb in Adjustment

MITO15D 0.4–12.0 100–850 1.0 8.0x1.7 Current Inline

MITO15D/TA 0.4–12.0 100–850 1.0 8.0x1.7 Current Inline

Model Features Dimensions Weight Screwdriverin lb

EDU2AE/TOP/MITO Programmable Torque (8 P-sets) with user interface screens 7.7x6.7x4.3 7.5 MITO15D

EDU2AE/TOP/MITO/TA Programmable Torque & Angle (8 P-sets) with user interface 7.7x6.7x4.3 7.5 MITO15D/TA

MITO Drivers

MITO Controllers

ACE SCREW COUNTERMODEL # ACE 101/FR

MITO Screwdrivers – Current Control with Torque Only, or Torqueand Angle CapabilityTORQUE UP TO 12 in/lbs

Kolver’s experience with current control technology has led to the creation of the MITO screwdrivers; the firstultra-low torque, truly accurate current controlled torque driver. The MITO features an innovative electric motorcoupled with planetary gearboxes, producing extremely low inertia and minimal friction for long life, and very

accurate torque production. MITO Series is available in torque, or torque and angle models.

Model MITO 15D ranges in torque from 0.4 – 12 in/lbs, and features an ESD-safe housing and cord set,compact ergonomic design. Drivers are inline style, with a lever start actuation. MITO systems areavailable with our 8 P-set programmable controllers for maximum versatility.

EDU2AE/TOP/MITO

EDU2AE/TOP/MITO/TA

Page 12: ELECTRIC SCREWDRIVERS · ELECTRIC SCREWDRIVERS CATALOG /  FAB & RAF SERIES ANGHD8 (FAB) ANGHD9 (RAF) Model Torque Screw RPM Start Weight L x Ø Style in/lbs size max option lb in

MT-1 Red 0.5–16.0 in/oz 1.9 3.1 x 0.7

MT-1SS Stainless 0.5–16.0 in/oz 1.9 3.1 x 0.7

MT-2 Yellow 0.7–32.0 in/oz 2.1 3.6 x 0.7

MT-3 Blue 3.0 in/oz–12.0 in/lb 5.9 4.4 x 1.1

MT-3SS Stainless 3.0 in/oz–12.0 in/lb 5.9 4.4 x 1.1

MT-4 Green 8.0 in/oz–36.0 in/lb 6.5 4.9 x 1.1

ELECTR IC SCREWDRIVERS CATALOG / www.ko lverusa . com10

A C C S E R I E S

3 POSITIONSREVERSE SWITCH

TORQUE ADJUSTINGNUT COVER

Stainless Steel Torque Screwdrivers• 300 Series Stainless Steel components including handle.• Sealed ball bearings fitted to contain all lubricants.• Torque driver exceeds class 100 clean room environments.

M I C R O T O O L S

Products Torque Range Weight DimensionsModel Color in/lbs oz LengthxDiameter

Model Torque Screw RPM Weight L x Ø Voltagein/lbs size max lb in cc

ACC2210 1.7–8.8 M3 950 1.6 10.1x1.4 120 VAC

ACC2220 6.2–17.7 M4 950 1.8 10.1x1.4 120 VAC

ACC2230 8.8–26.5 M5 950 1.9 10.4x1.5 120 VAC

ACC2245 8.8–39.8 M5 450 1.9 10.4x1.5 120 VAC

Micro Tool Torque Limiting ScrewdriversThese manual torque drivers are designed for customers that require a precision, preset,manual torque screwdriver.

• Designed and tested to meet or exceed ISO 6789 specifications.• 1/4” female hexagon bit socket.• Torque driver can be set to a customer specified torque value prior to shipping.• Cam mechanism with suspended adjustable thrust and axial bearings.• Optional soft grip handle.

ACC ScrewdriversACC screwdrivers with shut off torque control through mechanical clutch are direct plug-in

tools with built-in PCB for automatic cut off and AC to DC rectifier. They are ideal for applicationswhere portability is needed to minimize costly set-up time. ACC models have the unique

feature of selectable push to start or push and lever start. To select the work ng modejust slide the switch located by the start lever.

Page 13: ELECTRIC SCREWDRIVERS · ELECTRIC SCREWDRIVERS CATALOG /  FAB & RAF SERIES ANGHD8 (FAB) ANGHD9 (RAF) Model Torque Screw RPM Start Weight L x Ø Style in/lbs size max option lb in

www.ko lverusa . com / ELECTR IC SCREWDRIVERS CATALOG 11

P R E S E N T E R S & A C C E S S O R I E S

Pivoting Arm and Tool BalancerARM PV2 support arm consists of a 4’ vertical upright, and a 2’ horizontal support arm.The horizontal arm moves a full 180°, and has a moveable tool trolley the full 2’ length. Itis equipped with a support base for attaching to the work surface, or an optional C clampfor areas where no drilling is allowed. TEC BA1, TEC BA2, TEC BA3 Tool Balancers, whichare sold separately, have capacities up to 6.6 lbs, and allow screwdrivers to be positionedover the workstation for maximum operator comfort. Additional models with capacity up to397 lbs are available. Consult factory for details.

Light Tower StackWe offer several models of light towers for our EDU2AE, EDU1SL/SG, and EDU1FR/SG controllers. Options include 2 or 3 light stack (Red, Yellow, Green), and with or withoutaudible alarms. Lights, tower, and cable all included.

Vacuum Adaptor Kit Series and PumpVA-250K Vacuum Adaptors are designed to work with our FAB, RAF, and PLUTO Seriesdrivers. The kit consists of a threaded vacuum adaptor assembly with outlet for hose, smallinstallation tool, and a 6’ plastic vacuum hose with fittings. Interchangeable screw finders,machined to customer screw head specifications, are sold separately.

Model #3-0170-0006 is a self-contained vacuum pump, drawing 25” of mercury. Optionaldual port connector is available for powering 2 vacuum units.

ScrewFinder

VacuumAdapter

Screw Presenter NFK Series

Model Max Shank Ø Screw Length min Screw Length maxin in in

NFK 514-I 0.06 0.07 0.4

NFK 517-I 0.07 0.07 0.4

NFK 520-I 0.08 0.10 0.7

NFK 523-I 0.09 0.11 0.7

NFK 526-I 0.10 0.14 0.7

NFK 530-I 0.12 0.16 0.7

NFK 540-I 0.16 0.20 0.7

NFK 550-I 0.20 0.24 0.7

Page 14: ELECTRIC SCREWDRIVERS · ELECTRIC SCREWDRIVERS CATALOG /  FAB & RAF SERIES ANGHD8 (FAB) ANGHD9 (RAF) Model Torque Screw RPM Start Weight L x Ø Style in/lbs size max option lb in

ELECTR IC SCREWDRIVERS CATALOG / www.ko lverusa . com12

S M A R T A R M

Model Load Capacity Torque Reach A B Z Balancelb Nm in in in in

PS2E-0750-0001 0–2.2 30 27.9 15.75 17.75 7.1 Spring

PS2E-0750-1025 2.2–5.5 30 27.9 15.75 17.75 7.1 Spring

PS2E-0900-00001 0–2.2 30 33.1 15.75 23.00 7.2 Spring

PS2E-0900-01025 2.2–5.5 30 33.1 15.75 23.00 7.2 Spring

PS1E-1000-0101 2.2–4.4 70 38.8 22.50 25.00 9.8 Gas Shock

PS1E-1000-0204 4.4–8.8 70 38.8 22.50 25.00 9.8 Gas Shock

PS1E-1000-0405 8.8–11.0 70 38.8 22.50 25.00 9.8 Gas Shock

PS1E-1000-0608 11.0–23.2 70 38.8 22.50 25.00 9.8 Gas Shock

PS1E-1000-0810 23.2–27.6 70 38.8 22.50 25.00 9.8 Gas Shock

PS1E-1200-0102 2.2–4.4 70 45.7 22.50 32.00 9.8 Gas Shock

PS1E-1200-0204 4.4–8.8 70 45.7 22.50 32.00 9.8 Gas Shock

PS1E-1200-0405 8.8–11.0 70 45.7 22.50 32.00 9.8 Gas Shock

PS1E-1200-0608 11.0–13.2 70 45.7 22.50 32.00 9.8 Gas Shock

PS1E-1000-0810 13.2–17.6 70 45.7 22.50 32.00 9.8 Gas Shock

PS150E 22.0 150 56.0 40.00 27.50 12.50 Gas /Air option

Do You Need Error Proofing?

You can upgrade Folding arms, most Rail arms, or create a custom arm with Smart-Control. Smart-Control consists of up to three (3) encoders at the pivot locationsof the Smart arm, linked to a control system that converts the data from theencoders to an X &Y location.

What Is Smart-Control?

Smart-Control upgrade adds positional tracking to your torque arm, based on user-defined locations. Smart-Control knows the X & Y location of your screwdriver.When correct location is reached, the pre-defined torque program (P-set)is automatically selected, and power is activated to the screwdriver.

Smart-Control Features:■ Program 5 separate jobs with forty (40) locations each.■ Add a Bit/Socket tray to confirm the correct applicator is being used.■ Add Smart-Bins to confirm the correct fastener is being used.

A

B

Z

C

C = Custom length upon request

Page 15: ELECTRIC SCREWDRIVERS · ELECTRIC SCREWDRIVERS CATALOG /  FAB & RAF SERIES ANGHD8 (FAB) ANGHD9 (RAF) Model Torque Screw RPM Start Weight L x Ø Style in/lbs size max option lb in

www.ko lverusa . com / ELECTR IC SCREWDRIVERS CATALOG 13

S M A R T A R M

Software:

• Sequence Mode: Smart Arm system controls the location ofthe fastening process in a pre-determined sequence.

• PLC Mode: Smart Arm system controls the location sequence,and PLC or external I/O control system selects recipes and advances sequence forward or back for repair.

• Origin on the Fly: User can correct X/Y or X/Y/Rotation(theta) position for each piece part at start of recipe.

• X/Y Data Output: User can request data string from SmartControl box via USB. Data includes X & Y position, recipe, sequence number, active point and torque program.

• Upload/Download: Software to download recipes fromPC to Smart Control box or upload from Smart Control box todownload to another system.

• Design Studio: PC based software to design the graphicdisplay used in Runtime Studio. Includes importing and scaling product image and assigning target locations for eachsequence step.

• Runtime Studio: PC based GUI for operator duringproduction run. Display guides operator through sequence of steps with cross hairs and target location.

Guided Assembly - Error Proofing

Cable PN# Driver Manufacturer

SA-0040-00008 Kolver

SA-0040-00007 Atlas Copco/Ingersoll Rand

SA-0040-00006 AC Microtorque

SA-0040-00013 Stanley

SA-0040-00017 Acradyne

SA-0040-00018 Rexroth

SA-0040-00019 GSE

Required Driver Cables:

Options:

• Smart Bits: Four socket bit tray with LED illumination toidentify correct bit for current location.

• Smart Bins: Pick to light sensors used to identify the correctbin assigned for the current location. Green indicates correct bin to pick from, red indicates incorrect bin.

• Memory Upgrade: Standard memory is 5 recipes with amaximum of 40 points per recipe. Upgraded memory is a user definable selection, from 10 recipes with 512 points per recipe up to 100 recipes with 138 points per recipe.

• Barcode Recipe Select: Automate the recipe selectionprocess with the use of a Barcode reader, hand held or fixed.

SMART BINBIT TRAY BIN SENSOR

Page 16: ELECTRIC SCREWDRIVERS · ELECTRIC SCREWDRIVERS CATALOG /  FAB & RAF SERIES ANGHD8 (FAB) ANGHD9 (RAF) Model Torque Screw RPM Start Weight L x Ø Style in/lbs size max option lb in

ELECTR IC SCREWDRIVERS CATALOG / www.ko lverusa . com14

T O R Q U E T E S T E R - K S E R I E S

Model Torque Dimensions Weightin/lb in lb

K1 0.4–8.8 7.1x4.1x2.1 2.2

K5 2.6–44.0 7.1x4.1x2.1 2.2

K20 4.4–177.0 7.1x4.1x2.1 2.2

KTE25 17.7–221.0

KTE5 4.4–44.0

TORQUE TESTER - K SeriesThe K Series is a totally new class of analyzers. They feature a built-in transducer and also have the

unique ability to connect to an external transducer. Using a high performance circuitry they collect, store and eventually download torque measures for a complete analysis of the tool

and/or the joint. Priced at a low level, this tester has become popular among thosecompanies wishing to improve their product quality through the precise

control of torque.

• User friendly menu.• Accuracy: =/- 0,5% of the displayed value.• Internal transducer for tests on a joint simulator (supplied with the unit).• Connection for external transducer (transducer not included).• 500 readings memory.

• Selection among Nm, Ncm, Kg.cm, in, lbs.• RS232C output (cable not included).• Indication <=> of the preset values.

• Output signal at preset reached value.• Clockwise and counter-clockwise measurement.

• 3 models of operation: Peak +, Peak -, Track.• Manual or automatic reset.

• 9 V rechargeable battery provide 4 hours of continuous operation. Automatic switch off to reduce batteryconsumption.

• 125% transducer overload protection.• English and Italian menu.

Supplied in a plastic carrying case, with one rechargeable battery, 1 joint simulator (semielastic), instruc-tions manual and certificate of calibration. Additional joint simulators (rundown adapters) for hard joint or fully elastic joint available on request.

CONNECTINGPORTS

KEYPADJOINT SIMULATOR EXTERNAL ROTARYTRANSDUCER

Page 17: ELECTRIC SCREWDRIVERS · ELECTRIC SCREWDRIVERS CATALOG /  FAB & RAF SERIES ANGHD8 (FAB) ANGHD9 (RAF) Model Torque Screw RPM Start Weight L x Ø Style in/lbs size max option lb in

www.ko lverusa . com / ELECTR IC SCREWDRIVERS CATALOG 15

T O R Q U E T E S T E R - M I N I S E R I E S

Controlling torque is vital for companies to ensure their product’s quality. Fasteners that areinsufficiently torqued can vibrate loose and excessive torque can strip threaded fasteners. Using aquality torque analyzer has become increasingly important for many companies to ensure that propertorque is being applied.

TORQUE TESTER - Mini K SeriesMINI K Torque Analyzers feature a built-in transducer. The easy-to-use torque tester is ideal for checkingall power tools up to 20 Nm. The small size and portability of the MINI K makes it ideal for checkingtorque tools on the production floor regularly to ensure the tools are always calibrated.

• Built-in transducer.• Three models with 8.8 in/lb, 44 in/lb and 177 in/lb max torque.• Four digit display.• Manual and auto reset functions to clear displayed values.• Unit may be powered by 9V battery (30 hours of operation) or with our AC adaptor (included).• Automatic shut down to extend battery life.• Torque tester includes a spring washers joint simulator (minik 20) or built-in joint simulator

and case.

Accuracy: ±0.5% of reading from 10% to 100%.Accuracy: ±1% of reading from 1% to 10%.

Model Torque Dimensions Weightin/lb in lb

mini K1 AC 0.4–8.8 5.9x2.8x1.8 1.8

mini K5 AC 2.6–44.0 5.9x2.8x1.8 1.8

mini K20 AC 4.4–177.0 5.9x2.8x1.8 1.8

Model Torque Dimensions Weightin/lb in lb

mini Ke 1 5.9x2.8x1.8

mini Ke 5 5.9x2.8x1.8

mini Ke 5.9x2.8x1.8

mini Ke 25 5.9x2.8x1.8

0.4–8.8external rotary transducer

4.4–44.0external rotary transducer

17.7–221.0external rotary transducer

Up to 4425.0depending on transducer

1.1(without transducer)

1.1(without transducer)

1.1(without transducer)

1.1(without transducer)

TORQUE TESTER - Mini Ke seriesThe Mini Ke system consists of a torque readout and an external rotary transducer. The Rotary TorqueTransducer is the ideal torque-auditing tool for testing the actual torque being applied on the assemblyapplication. By connecting a rotary torque transducer between an electric or pneumatic tool and anassembly application, you can monitor the real torque being applied from the tool to fastener or bolt.

Accuracy: ±0.5% of reading from 10% to 100%.Accuracy: ±1% of reading from 1% to 10%.

Page 18: ELECTRIC SCREWDRIVERS · ELECTRIC SCREWDRIVERS CATALOG /  FAB & RAF SERIES ANGHD8 (FAB) ANGHD9 (RAF) Model Torque Screw RPM Start Weight L x Ø Style in/lbs size max option lb in

ACE Screw CounterThe ACE screw counter is a process control system that monitors the fastening assembly process. It tracks, in real time, the fastening of each screw in an assembly, then notifies the result. It keeps asummary of good and complete assemblies as well as of bad and incomplete ones throughout theproduction day. The ACE is easily programmed with user interface screens through the keypad. Walkthrough a few simple steps to input the parameters for total number of fasteners required in acompleted assembly and the fastening process can begin. The unit gives the operator audible andvisual indications that the assembly has been completed without error and it is safe to move on tothe next process step or if it has been rejected.

Main features:• May be connected to EDU1BR/SG or EDU2AE or to EDU1FR/SG.• ACE includes the screw counter + cable for connection to the control unit.• 8 independent programs.• Up to 99 screws for each program.• Sequence of 4 programs.• Min and max fastening time (accuracy: 0.01 sec).• Separate displays for parameters setting and fasteners count.• OK and Error lights.• Statistics: Total number of correct screws done, wrong screws, cycles done, sequences done.• I/O signals.• Password protected.• Wall mountable.• Remote control of the system (optional).• RS232 port.• Including mounting brackets.

Model Dimensions Weightin lb

ACE 101 5.4x4.5x1.1 1.2

EDU1FR/ACE 5.4x4.5x7.2 2.5

EDU1AE/ACE 7.3x5.0x8.4 8.1

EDU1BL/ACE 5.4x4.5x7.2 3.3

MembraneLCD Display

UP

DOWN

ESC

Screw done

On/OFFNok screwEnd cycle/Program

Screw OK

Reset cycle

OK

ELECTR IC SCREWDRIVERS CATALOG / www.ko lverusa . com16

A C E S C R E W C O U N T E R

Power supply Connector Input/Output Serial portconnector control unit connector

Page 19: ELECTRIC SCREWDRIVERS · ELECTRIC SCREWDRIVERS CATALOG /  FAB & RAF SERIES ANGHD8 (FAB) ANGHD9 (RAF) Model Torque Screw RPM Start Weight L x Ø Style in/lbs size max option lb in

Telescoping Arm SeriesKolver telescoping arms are manufactured to reduce torque reaction forces from fasteningassembly operations. Made of high strength carbon fiber, our CAR Series is easily adjustableto different positions by using a design technology that collapses each segment into itselflike a telescope. These arms may be used with a wide variety of electric or pneumatic tools,including screwdrivers with either inline or pistol style designs. When used with our toolbalancer, the arms become virtually weightless, improving productivity. Our unique slenderdesign insures that harmful torque reaction forces are prevented, especially on high torqueassembly operations. The universal tool holder adapts tightly to most standard electric orpneumatic tools, insuring no movement of the driver being used, which means better torquerepeatability on all assembly jobs. CAR Series in available in two standard capacities, 25Nmand 50Nm. Two standard lengths are available, and all arms contain a universal tool holder.

TLS BOX

Main features:• Telescoping design for improved flexibility• Slender collapsing sections for easy

movement and maximum operator comfort• Eliminates pinch points found on other

arm styles

• Used with standard tool balancer for virtually weightless operation

• Improved productivity and increased accuracy for all screw drivingoperations

www.ko lverusa . com / ELECTR IC SCREWDRIVERS CATALOG 17

T E L E S C O P I N G T O R Q U E R E A C T I O N A R M S E R I E S

T L S P O S I T I O N I N G A R M

Model Min Reach Max Reach Weight Max Torquein in Capacity Nm

CAR25 19.0 37.0 5 25

CAR25L 29.0 66.0 3 25

CAR50 19.0 37.0 5 50

CAR50L 29.0 66.0 3 50

Power supply Connector Input/Output Serial connectorconnector control unit connector to TLS arm

TLS Positioning ArmThe TLS Arm is an “intelligent” system that error-proofs your assembly ensuring that everyscrew is in the correct location at the right torque. Assembly sequences and X-Y coordinatesare easily programmed with user interface screens through the keypad from the intuitivemenu. Torque programs are automatically selected and enabled from the screwdrivercontroller based on the TLS Arm locations and current sequence step. No PC is required.A fixture to hold your work in the same place every time is highly recommended.The TLS Arm consists of a torque reaction arm with an encoder mounted at the pivot pointand with a linear metering resistor. The encoder records the angle and the linear resistorrecords the distance. The TLS Control Box converts the angle counts of the encoder and thedistance detected by the resistor to the precise X-Y position of the screwdriver. X-Y accuracycan be set by the operator according to each application.

TLS includes arm + unit + cable for EDU1BL/SG or EDU2AE or EDU1FR/SG.

Main features:• 3 programmable assembly

pattern• 6 programs per assembly• Up to 93 screws per assembly• Screw position (length/angle)• Programmable tolerance• Statistics• Manual reset• Password protected

• Units of measurement (mm, in)

• Language option• Accuracy: length ±1mm

angle ±1°• Minimum distance between

screw centers at maxextensions: 7mm

• External keyboard andserial port as options

TLS SYSTEM

Page 20: ELECTRIC SCREWDRIVERS · ELECTRIC SCREWDRIVERS CATALOG /  FAB & RAF SERIES ANGHD8 (FAB) ANGHD9 (RAF) Model Torque Screw RPM Start Weight L x Ø Style in/lbs size max option lb in

ELECTR IC SCREWDRIVERS CATALOG / www.ko lverusa . com18

F O L D I N G A R M ( P S 2 )

ADJUSTABLE VERTICAL HOLDER■ ATH-2540-2 Ø = 0.98–1.96 in■ ATH-5060-1 Ø = 1.6–1.96 in

Weight .44 lbs

FIXED VERTICAL HOLDER■ VTH-0036-2 Ø = 1.4 in■ VTH-0038-2 Ø = 1.5 in■ VTH-0046-2 Ø = 1.8 in■ VTH-0056-2 Ø = 2.2 in

Weight 1.54 lbs Torque ≤ 619.5 in/lbs

VERTICAL HOLDER,adjustable in two axis *

■ STH-0036-2 Ø = 1.4 in■ STH-0038-2 Ø = 1.5 in■ STH-0046-2 Ø = 1.8 in■ STH-0056-2 Ø = 2.2 in

Weight .66 lbs

Folding Arm (PS2)The PS2 folding arm has a large effectiveworking area and a wide selection oftool holders for both vertical andhorizontal operations.Common tools and machines that are used withPS2 include pop rivet guns portioning tools,power screwdrivers, adhesive guns and nail guns.

HORIZONTAL HOLDER,rotary and adjustable *

■ CST-0036-2 Ø = 1.4 in■ CST-0038-2 Ø = 1.5 in■ CST-0046-2 Ø = 1.8 in■ CST-0056-2 Ø = 2.2 in

Weight .88 lbs

ROTARY HORIZONTALHOLDER *

■ HTH-0036-2 Ø = 1.4 in■ HTH-0038-2 Ø = 1.5 in■ HTH-0046-2 Ø = 1.8 in■ HTH-0056-2 Ø = 2.2 in

Weight .88 lbs

TABLE STAND■ TST-0100

h = 11.8 in■ TST-0148

h = 18.5 in

TABLE CLAMP■ TCL-2282

PILLAR■ BST-080X040X0800

h = 31.5 in■ BST-080X040X1300

h = 51.2 in

WALL BRACKET■ WBR-P2

Article Number Load Capacity Torque Max reach Min reach

PS2-0750-0001 0–2.2 lbs 177.0 in/lbs 27.9 in 4.3 in

PS2-0750-01025 2.2–5.5 lbs 177.0 in/lbs 27.9 in 4.3 in

PS2-0900-0001 0–2.2 lbs 177.0 in/lbs 33.1 in 7.9 in

PS2-0900-01025 2.2–5.5 lbs 177.0 in/lbs 33.1 in 7.9 in

Page 21: ELECTRIC SCREWDRIVERS · ELECTRIC SCREWDRIVERS CATALOG /  FAB & RAF SERIES ANGHD8 (FAB) ANGHD9 (RAF) Model Torque Screw RPM Start Weight L x Ø Style in/lbs size max option lb in

www.ko lverusa . com / ELECTR IC SCREWDRIVERS CATALOG 19

( P A 2 ) P A R A L L E L A R M

ADJUSTABLE VERTICAL HOLDER■ ATH-2540-2 Ø = 0.98–1.96 in■ ATH-4050-2 Ø = 1.6–1.96 in

Weight .44 lbs

FIXED VERTICAL HOLDER■ VTH-0036-2 Ø = 1.4 in■ VTH-0038-2 Ø = 1.5 in■ VTH-0046-2 Ø = 1.8 in■ VTH-0056-2 Ø = 2.2 in

Weight .44 lbs

VERTICAL HOLDER,adjustable in two axis *

■ STH-0036-2 Ø = 1.4 in■ STH-0038-2 Ø = 1.5 in■ STH-0046-2 Ø = 1.8 in■ STH-0056-2 Ø = 2.2 in

Weight .44 lbs

BLANK STEP DOWNSLEEVE■ ADS-36■ ADS-46■ ADS-56

STEP DOWN SLEEVE■ ADS-36-xx,x■ ADS-46-xx,x■ ADS-56-xx,x

TOOL SPECIFIC STEPDOWN SLEEVE■ ADS-xxxx

Article Number Load Capacity Torque Max reach Min reach Height

PA2-0300-0002 0–4.4 lbs 177.0 in/lbs 25.2 in 17.3 in 13.8 in

PA2-0300-02025 4.4–5.5 lbs 177.0 in/lbs 25.2 in 17.3 in 13.8 in

PA2-0400-0002 0–4.4 lbs 177.0 in/lbs 30.7 in 20.5 in 16.9 in

PA2-0400-02025 4.4–5.5 lbs 177.0 in/lbs 30.7 in 20.5 in 16.9 in

TABLE STAND■ TST-0100

h = 11.8 in■ TST-0148

h = 18.5 in

TABLE CLAMP■ TCL-2282

PILLAR■ BST-080X040X0800

h = 31.5 in■ BST-080X040X1300

h = 51.2 in

WALL BRACKET■ WBR-P2

Parallel Arm (PA2)The PA2 parallel arm is intended forvertical operations and is used primarilywith threading machines and powerscrewdrivers.

Page 22: ELECTRIC SCREWDRIVERS · ELECTRIC SCREWDRIVERS CATALOG /  FAB & RAF SERIES ANGHD8 (FAB) ANGHD9 (RAF) Model Torque Screw RPM Start Weight L x Ø Style in/lbs size max option lb in

ELECTR IC SCREWDRIVERS CATALOG / www.ko lverusa . com20

F O L D I N G A R M ( P S 1 & P S 1 5 0 )

ADJUSTABLE

VERTICAL HOLDER■ ATH-4050-1

Ø = 1.6–1.96 in■ ATH-5060-1

Ø = 1.96–2.4 in

Weight .88 lbs

Torque ≤ 442.5 in/lbs

Folding Arm (PS1 & PS150)PS1 and PS150 are the most powerful folding arms. They are capable ofsupporting a weight of up to 22.0 lbsand a torque of up to 619.5 in/lbs.

Folding arms have a large effective working areaand are suitable for both vertical and horizontaloperations. The weight of the tool is supported bygas springs.

ADJUSTABLE HORIZONTAL

HOLDER■ HTH-4050-1 Ø = 1.6–1.96 in■ HTH-5060-1 Ø = 1.96–2.4 in

Weight 2.65lbs

Torque ≤ 442.5 in/lbs

ROTARY HORIZONTALHOLDER■ HTH-PF-057-1

Weight 3.53 lbs

Torque ≤ 619.5 in/lbs

ROTARY HORIZONTALHOLDER, swiveling tool■ HTH-PS-057-1

Weight 5.3 lbs

Torque ≤ 619.5 in/lbs

WALL BRACKET■ WBR-P1-1

Torque ≤ 442.5 in/lbs

PILLAR■ BST-080X080X0800

h = 31.5 in■ BST-080X080X1300

h = 51.2 in

WALL BRACKET■ WBR-P1-2

Torque ≤ 619.5 in/lbs

TABLE STAND■ TST-0125

Torque ≤ 442.5 in/lbs

Article Number Load Capacity Torque Max reach Min reach

PS1-1000-0102 2.2–4.4 lbs 619.5 in/lbs 38.8 in 11.6 in

PS1-1000-0204 4.4–8.8 lbs 619.5 in/lbs 38.8 in 11.6 in

PS1-1000-0405 8.8–11.0 lbs 619.5 in/lbs 38.8 in 11.6 in

PS1-1000-0506 11.0–13.2 lbs 619.5 in/lbs 38.8 in 11.6 in

PS1-1000-0608 13.2–17.6 lbs 619.5 in/lbs 38.8 in 11.6 in

PS1-1000-0810 17.6–22.0 lbs 619.5 in/lbs 38.8 in 11.6 in

PS1-1200-0102 2.2–4.4 lbs 619.5 in/lbs 45.7 in 15.7 in

PS1-1200-0204 4.4–8.8 lbs 619.5 in/lbs 45.7 in 15.7 in

PS1-1200-0405 8.8–11.0 lbs 619.5 in/lbs 45.7 in 15.7 in

PS1-1200-0506 11.0–13.2 lbs 619.5 in/lbs 45.7 in 15.7 in

PS1-1200-0608 13.2–17.6 lbs 619.5 in/lbs 45.7 in 15.7 in

PS1-1200-0810 17.6–22.0 lbs 619.5 in/lbs 45.7 in 15.7 in

FIXED VERTICAL

HOLDER■ VTH-PF-057-1■ VTH-PF-057-150

Weight 1.54 lbs

Torque ≤ 619.5 in/lbs

VERTICAL HOLDER,swiveling tool■ VTH-PS-057-1■ VTH-PS-057-150

Weight 3.75lbs

Torque ≤ 619.5 in/lbs

PS150-1200-0102 2.2–4.4 lbs 1327.0 in/lbs 47.0 in 20.0 in

PS150-1200-0203 4.4–6.6 lbs 1327.0 in/lbs 47.0 in 20.0 in

PS150-1200-0305 6.6–11.0 lbs 1327.0 in/lbs 47.0 in 20.0 in

PS150-1200-0506 11.0–13.2 lbs 1327.0 in/lbs 47.0 in 20.0 in

PS150-1200-0608 13.2–17.6 lbs 1327.0 in/lbs 47.0 in 20.0 in

PS150-1200-0810 17.6–22.0 lbs 1327.0 in/lbs 47.0 in 20.0 in

Page 23: ELECTRIC SCREWDRIVERS · ELECTRIC SCREWDRIVERS CATALOG /  FAB & RAF SERIES ANGHD8 (FAB) ANGHD9 (RAF) Model Torque Screw RPM Start Weight L x Ø Style in/lbs size max option lb in

www.ko lverusa . com / ELECTR IC SCREWDRIVERS CATALOG 21

( P A 1 & P A 1 5 0 ) P A R A L L E L A R M

ADJUSTABLE VERTICAL HOLDER■ ATH-4050-1 Ø = 1.6–1.96 in■ ATH-5060-1 Ø = 1.96–2.3 in

Weight .88 lbs

Torque ≤ 442.5 in/lbs

FIXED VERTICAL HOLDER■ VTH-PF-057-1■ VTH-PF-057-150

Weight 1.5 lbs

Torque ≤ 619.5 in/lbs

FIXED VERTICAL HOLDER

swiveling tool■ VTH-PS-057-1■ VTH-PS-057-150

Weight 3.3 lbs

Torque ≤ 619.5 in/lbs

PA150-1000-0102 2.2–4.4 lbs 1327.0 in/lbs 41.0 in 28.0 in 25.0 in

PA150-1000-0203 4.4–6.6 lbs 1327.0 in/lbs 41.0 in 28.0 in 25.0 in

PA150-1000-0305 6.6–11.0 lbs 1327.0 in/lbs 41.0 in 28.0 in 25.0 in

PA150-1000-0506 11.0–13.2 lbs 1327.0 in/lbs 41.0 in 28.0 in 25.0 in

PA150-1000-0608 13.2–17.6 lbs 1327.0 in/lbs 41.0 in 28.0 in 25.0 in

PA150-1000-0810 17.6–22.0 lbs 1327.0 in/lbs 41.0 in 28.0 in 25.0 in

Article Number Load Capacity Torque Max reach Min reach Height

PA1-0400-0102 2.2–4.4 lbs 619.5 in/lbs 36.2 in 24.8 in 21.7 in

PA1-0400-0203 4.4–6.6 lbs 619.5 in/lbs 36.2 in 24.8 in 21.7 in

PA1-0400-0304 6.6–8.8 lbs 619.5 in/lbs 36.2 in 24.8 in 21.7 in

PA1-0400-0405 8.8–11.0 lbs 619.5 in/lbs 36.2 in 24.8 in 21.7 in

PA1-0400-0506 11.0–13.2 lbs 619.5 in/lbs 36.2 in 24.8 in 21.7 in

PA1-0400-0608 13.2–17.6 lbs 619.5 in/lbs 36.2 in 24.8 in 21.7 in

PA1-0400-0810 17.6–22.0 lbs 619.5 in/lbs 36.2 in 24.8 in 21.7 in

PA1-0500-0102 2.2–4.4 lbs 619.5 in/lbs 43.3 in 28.7 in 25.6 in

PA1-0500-0203 4.4–6.6 lbs 619.5 in/lbs 43.3 in 28.7 in 25.6 in

PA1-0500-0305 6.6–11.0 lbs 619.5 in/lbs 43.3 in 28.7 in 25.6 in

PA1-0500-0506 11.0–13.2 lbs 619.5 in/lbs 43.3 in 28.7 in 25.6 in

PA1-0500-0608 13.2–17.6 lbs 619.5 in/lbs 43.3 in 28.7 in 25.6 in

PA1-0500-0810 17.6–22.0 lbs 619.5 in/lbs 43.3 in 28.7 in 25.6 in

Parallel Arm (PA1 & PA150)PA1 and PA150 are the most powerful parallel arms. They are capable ofsupporting a weight of up to 22.0 lbsand a torque of up to 619.5 in/lbs. Theyare intended for vertical operations andare especially suitable for fitting screwsand for large threading operations.

The weight of the tool is supported by gas springs.

TABLE STAND■ TST-0125

Torque ≤ 442.5 in/lbs

PILLAR■ BST-080X080X0800

h = 31.5 in■ BST-080X080X1300

h = 51.2 in

WALL BRACKET■ WBR-P1-2

Torque ≤ 619.5 in/lbs

WALL BRACKET■ WBR-P1-1

Torque ≤ 442.5 in/lbs

Page 24: ELECTRIC SCREWDRIVERS · ELECTRIC SCREWDRIVERS CATALOG /  FAB & RAF SERIES ANGHD8 (FAB) ANGHD9 (RAF) Model Torque Screw RPM Start Weight L x Ø Style in/lbs size max option lb in

Article Number Load Capacity Torque Reach

PR1-0500-0102 2.2–4.4 lbs 442.5 in/lbs +/- 19.7 in

PR1-0500-0204 4.4–8.8 lbs 442.5 in/lbs +/- 19.7 in

PR1-0500-0405 8.8–11.0 lbs 442.5 in/lbs +/- 19.7 in

Rail Supported Arm (PR1)The PR1 rail supported arm is the mostpowerful arm of this type and has a veryversatile design.The rails for the PR1 arm and smaller PR2 armare the same. This has the advantage that ifnecessary both sizes of arm can be mounted onthe same rail unit. The extension tube can bemounted at the required height. The weight ofthe tool is supported by gas springs.

PILLAR■ BST-080X080X1300

OFFSET BEAM■ OSB-080X040X0500

RAIL■ BRL-3412

ALUMINUM BEAM■ SBE-080X040

END STOP■ EST-3434

ARRESTING KIT 4 PCS■ AKI-MC6S06X040-1

Rec 1 set/m

END COVER■ ECO-8040

CABLE TROLLEY■ TRO-8040

Rec 1 piece/m

EXTENSION TUBE■ TEX-P1

Weight: 1.1 lbs

ADJUSTABLE VERTICAL HOLDER■ ATH-4050-1 Ø = 15.7–19.7 in■ ATH-5060-1 Ø = 19.7–23.6 in

Weight .88 lbs

Torque ≤ 442.5 in/lbs

FIXED VERTICAL HOLDER■ VTH-PF-057-1

Weight 1.5 lbs

Torque ≤ 619.5 in/lbs

FIXED VERTICAL HOLDER

swiveling tool■ VTH-PS-057-1

Weight 3.3 lbs

Torque ≤ 619.5 in/lbs

ELECTR IC SCREWDRIVERS CATALOG / www.ko lverusa . com22

R A I L S U P P O R T E D A R M ( P R 1 )

Page 25: ELECTRIC SCREWDRIVERS · ELECTRIC SCREWDRIVERS CATALOG /  FAB & RAF SERIES ANGHD8 (FAB) ANGHD9 (RAF) Model Torque Screw RPM Start Weight L x Ø Style in/lbs size max option lb in

23www.ko lverusa . com / ELECTR IC SCREWDRIVERS CATALOG

R A I L S U P P O R T E D A R M ( P R 2 )

ADJUSTABLE VERTICAL HOLDER■ ATH-2540-2 Ø = 0.98–1.96 in■ ATH-4050-2 Ø = 1.6–1.96 in

Weight .44 lbs

FIXED VERTICAL HOLDER■ VTH-0036-2 Ø = 1.4 in■ VTH-0038-2 Ø = 1.5 in■ VTH-0046-2 Ø = 1.8 in■ VTH-0056-2 Ø = 2.2 in

Weight .44 lbs

VERTICAL HOLDER,adjustable in two axis *

■ STH-0036-2 Ø = 1.4 in■ STH-0038-2 Ø = 1.5 in■ STH-0046-2 Ø = 1.8 in■ STH-0056-2 Ø = 2.2 in

Weight .44 lbs

Article Number Load Capacity Torque Reach

PR2-0550-00025 0–5.5 lbs 177.0 in/lbs +/- 18.1 in

PILLAR■ BST-080X040X1300

OFFSET BEAM■ OSB-080X040X0500

RAIL■ BRL-3412

ALUMINUM BEAM■ SBE-080X040

END STOP■ EST-3434

ARRESTING KIT 4 PCS■ AKI-MC6S06x040-1

Rec 1 set/m

END COVER■ ECO-8040

CABLE TROLLEY■ TRO-8040

Rec 1 piece/m

HEIGHT STOP■ TAR-P2

SIDE STOP■ SAR-P2

EXTENSION TUBE

adjustable■ THA-P2

Weight: 1.3 lbs

EXTENSION TUBE■ TEX-P2

Weight: 1.1 lbs

Rail Supported Arm (PR2)The PR2 rail supported arm has a veryflexible design and many practicalaccessories. It is recommended that therail supported arm is fitted with both aside stop and a height stop for maxi-mum control and convenience.The extension tube can be mounted at therequired height. If an adjustable working heightis required, we recommend the adjustableextension tube. It can be adjusted between15.75 and 27.6 in.

Page 26: ELECTRIC SCREWDRIVERS · ELECTRIC SCREWDRIVERS CATALOG /  FAB & RAF SERIES ANGHD8 (FAB) ANGHD9 (RAF) Model Torque Screw RPM Start Weight L x Ø Style in/lbs size max option lb in

ELECTR IC SCREWDRIVERS CATALOG / www.ko lverusa . com24

L I N E A R A R M

The SmartMotion LinearArm Assembly Kits: The Linear Series arms maneuversmoothly as they absorb the torquereaction from the screwdrivers whileproviding ergonomic support for theoperator. The fluid movement increasesprecision and production for a varietyof torque applications.Prevents cross threading and side load. Keepstool perpendicular. Reduces RMI (RepetitiveMotion Injury) and CTS (Carpal Tunnel Syndrome)while boosting production. Extends in horizontaldirection and arm length is adjustable. Maneuverssmoothly as the arm absorbs torque reactionfrom electric pneumatic tools.

TABLE CLAMP■ TCL-2282

ADJUSTABLE VERTICAL HOLDER■ ATH-2540-2 Ø = 0.98–1.96 in■ ATH-4050-2 Ø = 1.6–1.96 in

Weight .44 lbs

FIXED VERTICAL HOLDER■ VTH-0036-2 Ø = 1.4 in■ VTH-0038-2 Ø = 1.5 in■ VTH-0046-2 Ø = 1.8 in■ VTH-0056-2 Ø = 2.2 in

Weight .44 lbs

VERTICAL HOLDER,adjustable in two axis *

■ STH-0036-2 Ø = 1.4 in■ STH-0038-2 Ø = 1.5 in■ STH-0046-2 Ø = 1.8 in■ STH-0056-2 Ø = 2.2 in

Weight .44 lbs

Article Number Torque Max Reach Min Reach

2-0020-00002 Up to 177.0 in/lbs 19.0 in 4.3 in

2-0020-00003 Up to 177.0 in/lbs 19.0 in 4.3 in

2-0020-00002 SmartMotion:Linear Arm with Universal Tool

Adapter Kit Includes:

2-0060-00003 Linear Arm

2-0060-00002 Table Stand

2-0010-00035 Tool Balancer Bracket

TEBCBA3 Tool Balancer

2-0010-00033 Universal Tool Holder

2-0020-00003 SmartMotion:Linear Arm with SmartMotion Tool

Adapter Kit Includes:

2-0060-00003 Linear Arm

2-0060-00002 Table Stand

2-0010-00035 Tool Balancer Bracket

TEBCBA3 Tool Balancer

2-0010-00034 Universal Tool Holder

Optional: availableupon request

Shop a la carte to configure which SmartMotion tool holder you would preferfor the 2-0020-00003 Linear Arm

BLANK STEP DOWNSLEEVE■ ADS-36■ ADS-46■ ADS-56

STEP DOWN SLEEVE■ ADS-36-xx,x■ ADS-46-xx,x■ ADS-56-xx,x

TOOL SPECIFIC STEPDOWN SLEEVE■ ADS-xxxx

Page 27: ELECTRIC SCREWDRIVERS · ELECTRIC SCREWDRIVERS CATALOG /  FAB & RAF SERIES ANGHD8 (FAB) ANGHD9 (RAF) Model Torque Screw RPM Start Weight L x Ø Style in/lbs size max option lb in

www.ko lverusa . com / ELECTR IC SCREWDRIVERS CATALOG

P N E U M A T I C A S S I S T

ADJUSTABLE VERTICAL HOLDER■ ATH-4050-1 Ø = 1.6–1.96 in■ ATH-5060-1 Ø = 1.96–2.4 in

Weight .88 lbs

Torque ≤ 442.5 in/lbs

ADJUSTABLE HORIZONTAL

HOLDER■ HTH-4050-1 Ø = 1.6–1.96 in■ HTH-5060-1 Ø = 1.96–2.4 in

Weight 2.65lbs

Torque ≤ 442.5 in/lbs

ROTARY HORIZONTALHOLDER■ HTH-PF-057-1

Weight 3.53 lbs

Torque ≤ 619.5 in/lbs

ROTARY HORIZONTALHOLDER, swiveling tool■ HTH-PS-057-1

Weight 5.3 lbs

Torque ≤ 619.5 in/lbs

FIXED VERTICAL HOLDER■ VTH-PF-057-1

Weight 1.54 lbs

Torque ≤ 619.5 in/lbs

VERTICAL HOLDER,swiveling tool■ VTH-PS-057-1

Weight 3.75lbs

Torque ≤ 619.5 in/lbs

ADJUSTABLE VERTICAL HOLDER■ ATH-2540-2 Ø = 0.98–1.96 in■ ATH-5060-1 Ø = 1.6–1.96 in

Weight .44 lbs

FIXED VERTICAL HOLDER■ VTH-0036-2 Ø = 1.4 in■ VTH-0038-2 Ø = 1.5 in■ VTH-0046-2 Ø = 1.8 in■ VTH-0056-2 Ø = 2.2 in

Weight 1.54 lbs Torque ≤ 619.5 in/lbs

VERTICAL HOLDER,adjustable in two axis *

■ STH-0036-2 Ø = 1.4 in■ STH-0038-2 Ø = 1.5 in■ STH-0046-2 Ø = 1.8 in■ STH-0056-2 Ø = 2.2 in

Weight .66 lbs

HORIZONTAL HOLDER,rotary and adjustable *

■ CST-0036-2 Ø = 1.4 in■ CST-0038-2 Ø = 1.5 in■ CST-0046-2 Ø = 1.8 in■ CST-0056-2 Ø = 2.2 in

Weight .88 lbs

ROTARY HORIZONTALHOLDER *

■ HTH-0036-2 Ø = 1.4 in■ HTH-0038-2 Ø = 1.5 in■ HTH-0046-2 Ø = 1.8 in■ HTH-0056-2 Ø = 2.2 in

Weight .88 lbs

The PneumaticAssist Arms: This option replaces the standard gasshocks or tension springs supplied withthe PS1 and PS2 torque arms with twoair cylinders. One air cylinder acts as thegas shocks or tension springs withadjustable tension while the other aircylinder provides up to 11 lbs of force.Both the pneumatic and electric assist systemsare activated by applying downward force to thescrewdriver. The incoming air supply and thescrewdriver are connected to a control box. In thepneumatic system the control system monitorsthe air pressure, when a pressure drop occurs,due to the tool starting, the air to the balancingcylinder is shifted to the force cylinder anddownward force is applied to the tool. In theelectric system the control system requires a24 volt signal from the screwdriver when it isstarted, when the 24 volt signal is detected theair to the balancing cylinder is shifted to the forcecylinder and downward force is applied to thetool. In both systems the force is adjustableby a regulator.

Electric Driver SystemsPDP-1-E Compatable with PS1 Series Arms

(Refer to chart on page 20)PDP-2-E Compatable with PS2 Series Arms

(Refer to chart on page 18)

Air Tool SystemsPDP-1-P Compatable with PS1 Series Arms

(Refer to chart on page 20)PDP-2-P Compatable with PS2 Series Arms

(Refer to chart on page 18)

Page 28: ELECTRIC SCREWDRIVERS · ELECTRIC SCREWDRIVERS CATALOG /  FAB & RAF SERIES ANGHD8 (FAB) ANGHD9 (RAF) Model Torque Screw RPM Start Weight L x Ø Style in/lbs size max option lb in

KOLVER USA10 Kidder Road

Unit 4Chelmsford, Massachusetts, 01824

USAphone: 978 455 0672fax: 978 455 0684www.kolverusa.com

CATES-3 5M 913

ONE YEAR LIMITED WARRANTY

Kolver USA, LLC. (“Kolver”) warrants that each product sold by it shall be free from defects in material and workmanshipunder normal application, use and service for a period of one (1) year from the date of shipment by Kolver or itsdistributors to the initial purchaser. Kolver’s sole obligation under this warranty is, in Kolver’s sole discretion, to repairor replace free of charge during the warranty period, any part or parts found to be defective, provided that the product(i) is delivered, postage prepaid, to Kolver USA, LLC. Woodland Park, One Park Drive, Unit 9, Westford, MA 01886;(ii) has not been misused, subjected to unusual stress, modified or services in any manner. THIS WARRANTY IS IN LIEU OFALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, WRITTEN OR ORAL, INCLUDING WITHOUT LIMITATION THE IMPLIEDWARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL KOLVER BELIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL OR OTHER DAMAGES IN EXCESS OF THE REPLACEMENT COSTOF THE DEFECTIVE PART(S). KOLVER’S OBLIGATIONS HEREUNDER SHALL TERMINATE THREE (3) YEARS FROM THE DATEOF THE ORIGINAL SHIPMENT.


Recommended