+ All Categories
Home > Education > electric Site visit

electric Site visit

Date post: 15-Jan-2017
Category:
Upload: deepak-sharma
View: 60 times
Download: 0 times
Share this document with a friend
13
Site visit Building Construction and Materials/ Services. Submitted by- B.Arch 3rd Year Invertis University Bareilly. Guided by – AR. Vimal Gupta
Transcript
Page 1: electric Site visit

Site visit

Building Construction and Materials/Services.

Submitted by-B.Arch 3rd Year

Invertis University Bareilly.

Guided by – AR. Vimal

Gupta

Page 2: electric Site visit

SITE VISIT BY 3RD YEAR STUDENT

Page 3: electric Site visit

Site - M.R. F Tyre show room

Location- Rampur

Road,near Agravanshi

Marble, Bareilly. REAR VIEW

Page 4: electric Site visit

Acknowledgement

We would like to express our special thanks of gratitude to our teacher AR. VIMAL GUPTA. And site engineer ER. RAJEEV SAXENA .Who gave us the golden opportunity to this wonderful project on the topic BUILDING SERVICES , which also helped us in doing a lot of research and we came to know about so many new things.We are really thankful to them.

Page 5: electric Site visit

ABOUT SITEThe site is located in Bareilly- Rampur highway side The Area of the site is 3000 sq ft.The site is surrounded by residential and commercial building.On the back of the site their was green belt area.The construction on site is done for the MRF showroom. The construction area on the site was 40% of the total site area(3000sq ft).

Page 6: electric Site visit

JUNCTION BOX AND ITS TYPE

JUNCTION BOX

Page 7: electric Site visit

FAN BOX AND ITS TYPE

FAN BOX

Page 8: electric Site visit

WIRE MESH AND JUNCTION

WIRE MESH

JUNCTION BOX

DISTRUBITION OFCONNECTION

Page 9: electric Site visit

R.C.C.

DIA-10

DIA-6MM

DIA-20MM

Page 10: electric Site visit

WALL ROSE

WALL ROSE

Page 11: electric Site visit

LEARNINGThe purpose of visiting the site was learning

about the building services and the construction.

Connectivity of lighting by using fan box and junction box.

Tamping of concrete by using vibrator . R.C.C. framing of column , beam and slab.Placing of transverse and main bar. Placing of ceiling rose .Arrangement of wiring throughout the slab.Placing of different equipment in slab .i.e.,fan

ceiling lights.

Page 12: electric Site visit

INFERENCES• Electrical services are properly

arranged.• Material used according to need.• Mezzanine floor was used .• Wood is used as a low cost

material.• Wood shuttering .

Page 13: electric Site visit

THANK YOU


Recommended