GENERAL CATALOGUEElectrical Enclosures
®www.ipenclosures.com
2019
Enclosures
®
Dear Valued Customer,
IP Enclosures is a high quality Australian brand of electrical enclosures. We provide steel and stainless steel electrical enclosures for low voltage switchgear and control gear assemblies. Freestanding cabinets, data rack cabinets and telecommunications field cabinets are also available. If you have special requirements, custom enclosures are available to order.
Protection in the toughest conditionsTM
Our enclosures have been designed in Australia and precision manufactured to the highest standards using world-class international manufacturing facilities. Our range complies to IEC62208 and IEC/EN/AS60529 up to IP66 IK10, NEMA 4 and NEMA 4x certified by an independent accredited test laboratory.We look forward to working with you.
Regards,
The Team at IP Enclosures
World Class Electrical Enclosure System
Introduction CONTENTS Page
Wall Mounted Electrical Enclosures Steel RAL7035 Grey S1 Steel Powder-Coated (Single Door) 2-3 S2 Steel Powder-Coated (Double Door) 4-5 S1 & S2 Dimension Table 6-7 Steel RAL2000 Orange S1 Steel Powder-Coated (Single Door) 8-10 Colour Options 11 316 Stainless Steel SS1 316 Stainless Steel (Single Door) 12-13 SS2 316 Stainless Steel (Double Door) 14-15 SS1 & SS2 Dimension Table 16-17 316ss Sloping Roof Enclosures SSSR-1 Stainless Steel (30° Sloping Roof) 18-19
Free Standing Electrical Cabinets MF1S Steel Powder-Coated (Single Door) 20-21 MF1SS 316 Stainless Steel (Single Door) 22-23 MF1S & MF1SS Dimension Table 24-25
IP66 19” Data Racks SD Steel Powder-Coated 26-27 SSD 316 Stainless Steel 28-29
Accessories Inner Doors 30 Rain Hoods 31 Vents & Vent Hoods 32 Sun Shield Kits 33 Thermal Control - Fans, Filters & Heaters 34-35 Mounting Brackets & Stands 36 Earthing Kits 37 19” Data Rack Rail Kits 37 Wiring Plan Pockets 37 LED Lighting Solutions 38 Locking & Security Solutions 39
Custom Enclosures 40
Technical Reference Degree of Protection 41
IP Enclosures is a high quality Australian brand of electrical enclosures.
All IP Enclosures have been designed in Australia and precision manufactured to the highest standards using world-class international manufacturing facilities. Our range of enclosures comply to IEC62208 and IEC/EN/AS60529 up to IP66 IK10, NEMA 4 and NEMA 4x certified by an independent accredited test laboratory. UL508A certification is also available. They are suitable for up to 1000 V AC at frequencies not exceeding 1000 Hz or 1500 V DC.
Incorporating many advanced design features as standard inclusions, IP Enclosures has been chosen by many organisations as their standard enclosure system.
The full range of IP Enclosures are available via a network of distributors with comprehensive sales and technical support. Large quantities of all sizes are held in stock and are available for immediate dispatch via our integrated sales, inventory and logistics systems.
“IP Enclosures is a registered trademark. Aim for high quality and ask for genuine IP Enclosures.”
www.ipenclosures.comPage 1
ipenclosures.com.au
Mounted Electrical EnclosuresSteel | Powder-Coated RAL7035 Grey
SINGLE DOOR | IP66
S1
The IP Enclosures S1 range of powdercoated galvanised steel single door enclosures are designed to house a variety of electrical switch and control equipment. They are suitable for internal and external electrical installations for industrial, infrastructure, commercial and communications applications. All IP Enclosures are built to precision to ensure consistent high quality standards.
www.ipenclosures.comPage 2
S1Features & Specifications
IP Enclosures S Range of steel electrical enclosures are suitable for general industrial applications.
Protection: Complies with IP66 IK10, NEMA 4(Independent accredited test laboratory)
Standard: IEC62208, IEC/EN/AS60529(IEC61439 Compliant, Optional UL508A)
Material:- Body: 1.2mm galvanised steel sheet (up to 700x500x250) 1.5mm galvanised steel sheet (800x600x200 and above)- Gland Plate: 1.5mm galvanised steel sheet- Door: 1.5mm galvanised steel sheet- Device Mounting Plate: 1.5mm galvanised steel sheet- Seal: Polyurethane
Body: The robust monoblock body is fabricated using galvanised steel sheet (1.2mm-1.5mm). Cutting, pressing and full continuous seam welding using precision automated manufacturing equipment to ensure accuracy and consistent high quality. Flat face sealing surfaces are provided to increase seal life. Pre-fitted blind nutserts are incorporated to accommodate mounts and accessory fasteners to eliminate drilling and retain IP rating. Integral device plate mounts and M6 earth stud is provided. A galvanised steel gland plate is incorporated into the bottom face.
Single Door: The robust surface mounted door is fabricated using 1.5mm galvanised steel sheet and incorporates concealed removable hinges with captive pins. The door is designed for a 110° opening. Each door contains integral cable management rails, M6 earth stud and a high quality machine-applied foamed in place (FIP) Polyurethane seal. Two internal cable management rails can be removed to provide additional space for equipment, duct and door mounted control components.
Seal: A high quality machine-applied full perimeter Polyurethane seal foamed in place (FIP) provides excellent sealing over a long life.
Lock: A full range of locking solutions are available upon request.Steel enclosures <1000mm high have 3mm double bit insert quarter turn lock with key.Enclosures >1000mm high have 3 point locking system with key-lock swing handle.
Device Mounting Plate: The device mounting plate is fabricated using 1.5mm galvanised steel sheet, pressed to provide additional strength and supplied pre-fitted into enclosure as standard.
Gland Plate: Gland plates are provided with gaskets and fasteners. The size and quantity vary according to enclosure size. The gland plates are incorporated into the bottom face of the enclosure body, located towards the rear adjacent to the device plate for ease of cable management.
Surface Treatment: UL approved epoxy polyester powder-coated with a textured finish. 80-120 micron average thickness. Colour RAL7035 (Other colours available upon request)
www.ipenclosures.comPage 3
Mounted Electrical EnclosuresSteel | Powder-Coated RAL7035 Grey
DOUBLE DOOR | IP55
S2
The IP Enclosures S2 range of powdercoated galvanised steel double door enclosures are designed to house a variety of electrical switch and control equipment. They are suitable for internal and external electrical installations for industrial, infrastructure, commercial and communications applications. All IP Enclosures are built to precision to ensure consistent high quality standards.
www.ipenclosures.comPage 4
S2Features & Specifications
IP Enclosures S Range of steel electrical enclosures are suitable for general industrial applications.
Protection: Complies with IP55 IK10, NEMA 4(Independent accredited test laboratory)
Standard: IEC62208, IEC/EN/AS60529(IEC61439 Compliant, Optional UL508A)
Material:- Body: 1.5mm galvanised steel sheet- Gland Plate: 1.5mm galvanised steel sheet- Door: 1.5mm galvanised steel sheet- Device Mounting Plate: 1.5mm galvanised steel sheet- Seal: Polyurethane
Body: The robust monoblock body is fabricated using 1.5mm galvanised steel sheet. Cutting, pressing and full continuous seam welding using precision automated manufacturing equipment to ensure accuracy and consistent high quality. Flat face sealing surfaces are provided to increase seal life. Pre-fitted blind nutserts are incorporated to accommodate mounts and accessory fasteners to eliminate drilling and retain IP rating. Integral device plate mounts and M6 earth stud is provided. A gland plate is incorporated into the bottom face.
Double Doors: The robust surface mounted doors are fabricated using 1.5mm galvanised steel sheet and incorporates concealed removable hinges with captive pins. The doors are designed to eliminate the central mullion to improve accessibility into the enclosure. The doors are designed for a 110° opening. Each door contains integral cable management rails, M6 earth stud and a high quality machine-applied foamed in place (FIP) Polyurethane seal. Two internal cable management rails can be removed to provide additional space for equipment, duct and door mounted control components.
Seal: A high quality machine-applied continuous foamed in place (FIP) Polyurethane seal provides excellent sealing over a long life.
Lock: A full range of locking solutions are available upon request. Standard locks are as follows:Steel enclosures <1000mm high have 3mm double bit insert quarter turn lock with key.Enclosures >1000mm high have 3 point locking system with key-lock swing handle.
Device Mounting Plate: The device mounting plate is fabricated using 1.5mm galvanised steel sheet, pressed to provide additional strength and supplied pre-fitted into enclosure as standard.
Gland Plate: Gland plates are provided with gaskets and fasteners. The size and quantity vary according to enclosure size. The gland plates are incorporated into the bottom face of the enclosure body, located towards the rear adjacent to the device plate for ease of cable management.
Surface Treatment: UL approved epoxy polyester powder-coated with a textured finish. 80-120 micron average thickness. Colour RAL7035 (Other colours available upon request)
www.ipenclosures.comPage 5
S1Steel | Powder-Coated RAL7035 Grey
SINGLE DOOR | IP66
Part Number
Usable Depth (With Device
Plate)
Usable Depth (Without
Device Plate)Locks Weight
SKU H W D H1 W1 D1 D2 LxW Qty Qty (kg)
IP-302015 300 x 200 x 150 250 130 114 124 110x56 1 1 3
IP-303015 300 x 300 x 150 250 230 114 124 110x56 1 1 5
IP-303020 300 x 300 x 200 250 230 164 174 214x95 1 1 6
IP-L304020 300 x 400 x 200 250 330 164 174 214x95 1 1 9
IP-403015 400 x 300 x 150 350 230 114 124 110x56 1 1 7
IP-403020 400 x 300 x 200 350 230 164 174 214x95 1 1 9
IP-404020 400 x 400 x 200 350 330 164 174 214x95 1 1 10
IP-L406020 400 x 600 x 200 350 530 164 174 364x95 1 1 14
IP-503015 500 x 300 x 150 450 230 114 124 110x56 1 1 8
IP-503020 500 x 300 x 200 450 230 164 174 214x95 1 1 9
IP-504020 500 x 400 x 200 450 330 164 174 214x95 1 1 12
IP-504025 500 x 400 x 250 450 330 214 224 214x95 1 1 13
IP-505020 500 x 500 x 200 450 430 164 174 364x95 1 1 15
IP-505025 500 x 500 x 250 450 430 214 224 364x95 1 1 16
IP-604020 600 x 400 x 200 550 330 164 174 214x95 1 1 14
IP-604025 600 x 400 x 250 550 330 214 224 214x95 1 1 15
IP-606020 600 x 600 x 200 550 530 164 174 364x95 1 2 20
IP-606030 600 x 600 x 300 550 530 264 274 364x95 1 2 22
IP-606040 600 x 600 x 400 550 530 364 374 364x95 1 2 25
IP-705020 700 x 500 x 200 650 430 164 174 364x95 1 2 17
IP-705025 700 x 500 x 250 650 430 214 224 364x95 1 2 19
IP-806020 800 x 600 x 200 750 530 164 174 364x95 1 2 25
IP-806025 800 x 600 x 250 750 530 214 224 364x95 1 2 26
IP-806030 800 x 600 x 300 750 530 264 274 364x95 1 2 28
IP-808020 800 x 800 x 200 750 730 164 174 214x95 2 2 31
IP-806040 800 x 600 x 400 750 530 364 374 364x95 1 2 33
IP-808030 800 x 800 x 300 750 730 264 274 214x95 2 2 34
IP-808040 800 x 800 x 400 750 730 364 374 214x95 2 2 39
IP-1006025 1000 x 600 x 250 950 530 214 224 364x95 1 2 32
IP-1006030 1000 x 600 x 300 950 530 264 274 364x95 1 2 34
IP-1008030 1000 x 800 x 300 950 730 264 274 214x95 2 2 42
IP-1008040 1000 x 800 x 400 950 730 364 374 214x95 2 2 46
IP-1206030 1200 x 600 x 300 1150 530 264 274 364x95 1 2 40
IP-1208030 1200 x 800 x 300 1150 730 264 274 214x95 2 2 49
IP-1208040 1200 x 800 x 400 1150 730 364 374 214x95 2 2 54
Enclosure Device Plate Gland Plate
www.ipenclosures.comPage 6
S2Steel | Powder-Coated RAL7035 GreyDOUBLE DOOR | IP55
Part Number
Usable Depth (With Device
Plate)
Usable Depth (Without
Device Plate)Locks Weight
SKU H W D H1 W1 D1 D2 LxW Qty Qty (kg)
IP-10010030 1000 x 1000 x 300 950 930 264 274 364x95 2 1 51
IP-10010040 1000 x 1000 x 400 950 930 364 374 364x95 2 1 56
IP-12010030 1200 x 1000 x 300 1150 930 264 274 364x95 2 1 62
IP-12010040 1200 x 1000 x 400 1150 930 364 374 364x95 2 1 67
IP-12012030 1200 x 1200 x 300 1150 1130 264 274 364x95 2 1 72
IP-12012040 1200 x 1200 x 400 1150 1130 364 374 364x95 2 1 78
Enclosure Device Plate Gland Plate
www.ipenclosures.comPage 7
ipenclosures.com.au
Mounted Electrical EnclosuresSteel | Powder-Coated RAL2000 Orange
SINGLE DOOR | IP66
S1
The IP Enclosures S1 range of RAL2000 Orange powdercoated galvanised steel single door enclosures are designed to house a variety of electrical switch and control equipment. They are suitable for internal and external electrical installations for industrial, infrastructure, commercial and communications applications. All IP Enclosures are built to precision to ensure consistent high quality standards.
www.ipenclosures.comPage 8
S1Features & Specifications
IP Enclosures S Range of RAL2000 Orange electrical enclosures are suitable for general industrial applications.
Protection: Complies with IP66 IK10, NEMA 4(Independent accredited test laboratory)
Standard: IEC62208, IEC/EN/AS60529(IEC61439 Compliant, Optional UL508A)
Material:- Body: 1.2mm galvanised steel sheet (up to 700x500x250) 1.5mm galvanised steel sheet (800x600x200 and above)- Gland Plate: 1.5mm galvanised steel sheet- Door: 1.5mm galvanised steel sheet- Device Mounting Plate: 1.5mm galvanised steel sheet- Seal: Polyurethane
Body: The robust monoblock body is fabricated using galvanised steel sheet (1.2mm-1.5mm). Cutting, pressing and full continuous seam welding using precision automated manufacturing equipment to ensure accuracy and consistent high quality. Flat face sealing surfaces are provided to increase seal life. Pre-fitted blind nutserts are incorporated to accommodate mounts and accessory fasteners to eliminate drilling and retain IP rating. Integral device plate mounts and M6 earth stud is provided. A galvanised steel gland plate is incorporated into the bottom face.
Single Door: The robust surface mounted door is fabricated using 1.5mm galvanised steel sheet and incorporates concealed removable hinges with captive pins. The door is designed for a 110° opening. Each door contains integral cable management rails, M6 earth stud and a high quality machine-applied foamed in place (FIP) Polyurethane seal. Two internal cable management rails can be removed to provide additional space for equipment, duct and door mounted control components.
Seal: A high quality machine-applied full perimeter Polyurethane seal foamed in place (FIP) provides excellent sealing over a long life.
Lock: A full range of locking solutions are available upon request.Steel enclosures <1000mm high have 3mm double bit insert quarter turn lock with key.Enclosures >1000mm high have 3 point locking system with key-lock swing handle.
Device Mounting Plate: The device mounting plate is fabricated using 1.5mm galvanised steel sheet, pressed to provide additional strength and supplied pre-fitted into enclosure as standard.
Gland Plate: Gland plates are provided with gaskets and fasteners. The size and quantity vary according to enclosure size. The gland plates are incorporated into the bottom face of the enclosure body, located towards the rear adjacent to the device plate for ease of cable management.
Surface Treatment: UL approved epoxy polyester powder-coated with a textured finish. 80-120 micron average thickness. Colour RAL2000 Orange.
www.ipenclosures.comPage 9
S1Steel | Powder-Coated RAL2000 Orange
SINGLE DOOR | IP66
Part NumberUsable Depth (With Device
Plate)
Usable Depth (Without
Device Plate)Locks Weight
SKU H W D H1 W1 D1 D2 LxW Qty Qty (kg)
IP-OR302015 300 x 200 x 150 250 130 114 124 110x56 1 1 3
IP-OR303015 300 x 300 x 150 250 230 114 124 110x56 1 1 5
IP-OR303020 300 x 300 x 200 250 230 164 174 214x95 1 1 6
IP-OR403015 400 x 300 x 150 350 230 114 124 110x56 1 1 7
IP-OR403020 400 x 300 x 200 350 230 164 174 214x95 1 1 9
IP-OR404020 400 x 400 x 200 350 330 164 174 214x95 1 1 10
IP-OR503015 500 x 300 x 150 450 230 114 124 110x56 1 1 8
IP-OR503020 500 x 300 x 200 450 230 164 174 214x95 1 1 9
IP-OR504020 500 x 400 x 200 450 330 164 174 214x95 1 1 12
IP-OR504025 500 x 400 x 250 450 330 214 224 214x95 1 1 13
IP-OR505020 500 x 500 x 200 450 430 164 174 364x95 1 1 15
IP-OR505025 500 x 500 x 250 450 430 214 224 364x95 1 1 16
IP-OR604020 600 x 400 x 200 550 330 164 174 214x95 1 1 14
IP-OR604025 600 x 400 x 250 550 330 214 224 214x95 1 1 15
IP-OR606020 600 x 600 x 200 550 530 164 174 364x95 1 2 20
IP-OR606030 600 x 600 x 300 550 530 264 274 364x95 1 2 22
IP-OR606040 600 x 600 x 400 550 530 364 374 364x95 1 2 25
IP-OR705020 700 x 500 x 200 650 430 164 174 364x95 1 2 17
IP-OR705025 700 x 500 x 250 650 430 214 224 364x95 1 2 19
IP-OR806020 800 x 600 x 200 750 530 164 174 364x95 1 2 25
IP-OR806025 800 x 600 x 250 750 530 214 224 364x95 1 2 26
IP-OR806030 800 x 600 x 300 750 530 264 274 364x95 1 2 28
IP-OR808020 800 x 800 x 200 750 730 164 174 214x95 2 2 31
IP-OR806040 800 x 600 x 400 750 530 364 374 364x95 1 2 33
IP-OR808030 800 x 800 x 300 750 730 264 274 214x95 2 2 34
IP-OR808040 800 x 800 x 400 750 730 364 374 214x95 2 2 39
IP-OR1006025 1000 x 600 x 250 950 530 214 224 364x95 1 2 32
IP-OR1006030 1000 x 600 x 300 950 530 264 274 364x95 1 2 34
IP-OR1008030 1000 x 800 x 300 950 730 264 274 214x95 2 2 42
IP-OR1008040 1000 x 800 x 400 950 730 364 374 214x95 2 2 46
IP-OR1206030 1200 x 600 x 300 1150 530 264 274 364x95 1 2 40
IP-OR1208030 1200 x 800 x 300 1150 730 264 274 214x95 2 2 49
IP-OR1208040 1200 x 800 x 400 1150 730 364 374 214x95 2 2 54
Enclosure Device Plate Gland Plate
www.ipenclosures.comPage 10
Colour Options
RAL7035 - Standard(Light Grey)
RAL7032(Pebble Grey)
RAL5010(Gentian Blue)
RAL 9005(Jet Black)
RAL6032(Signal Green)
RAL1003(Signal Yellow)
RAL2000(X15 Yellow Orange)
RAL3001(R13 Signal Red)
COLOUR CHART
All enclosures are supplied as RAL7035 unless requested otherwise. RAL7035 and RAL2000 are available ex-stock. WHITE and Colours listed below are made-to-order.
www.ipenclosures.comPage 11
Mounted Electrical EnclosuresStainless Steel Grade 316/316L
SINGLE DOOR | IP66
SS1
The IP Enclosures SS1 range of grade 316/316L stainless steel single door enclosures are designed for extreme duty to house a variety of electrical switch and control equipment. They are suitable for internal and external electrical installations for industrial, infrastructure, commercial, communications, defence, marine, food and beverage applications. All IP Enclosures are built to precision to ensure consistent high quality standards.
www.ipenclosures.comPage 12
SS1Features & Specifications
IP Enclosures SS Range of grade 316/316L Stainless Steel electrical enclosures are suitable for general industrial applications.
Protection: Complies with IP66 IK10, NEMA 4x(Independent accredited test laboratory)
Standard: IEC62208, IEC/EN/AS60529(IEC61439 Compliant, Optional UL508A)
Material:- Body: 1.5mm Grade 316/316L Stainless Steel- Door: 1.5mm Grade 316/316L Stainless Steel- Device Mounting Plate: 1.5mm Galvanised Steel Sheet- Seal: Polyurethane
Surface Finish: 0.4 micron Ra surface brushed finish
Body: The robust monoblock body is fabricated using 1.5mm Grade 316/316L Stainless Steel. Cutting, pressing and full continuous seam welding using precision automated manufacturing equipment to ensure accuracy and consistent high quality. Flat face sealing surfaces are provided to increase seal life. Pre-fitted blind nutserts are incorporated to accommodate mounts and accessory fasteners to eliminate drilling and retain IP rating. Integral device plate mounts and M6 earth stud is provided.
Door: The robust surface mounted door is fabricated using 1.5mm Grade 316/316L Stainless Steel and incorporates concealed removable hinges with captive pins. The door is designed for a 110° opening. Each door contains integral cable management rails, M6 earth stud and a high quality machine-applied foamed in place (FIP) Polyurethane seal. Two internal cable management rails can be removed to provide additional space for equipment, duct and door mounted control components.
Seal: A high quality machine-applied continuous foamed in place (FIP) Polyurethane seal provides excellent sealing over a long life.
Lock: A full range of locking solutions are available upon request. Standard locks are as follows:<1000mm high have 8mm square drive quarter turn lock with key.>1000mm high have 3 point locking system with key-lock swing handle.
Device Mounting Plate: The device mounting plate is fabricated using 1.5mm galvanised steel sheet, pressed to provide additional strength and supplied pre-fitted into enclosure as standard.
Incorporates many advanced features as standard - Fabricated using grade 316 stainless steel - Incorporates flat sealing face to improve seal life - Includes door cable rails - Includes nutserts for mounting brackets and accessories to retain IP rating - Includes mounting points for accessories including inner door escutcheons, rain hoods etc.
www.ipenclosures.comPage 13
Mounted Electrical EnclosuresStainless Steel Grade 316/316L
DOUBLE DOOR | IP55
SS2
The IP Enclosures SS2 range of grade 316/316L stainless steel double door enclosures are designed for extreme duty to house a variety of electrical switch and control equipment. They are suitable for internal and external electrical installations for industrial, infrastructure, commercial, communications, defence, marine, food and beverage applications. All IP Enclosures are built to precision to ensure consistent high quality standards.
www.ipenclosures.comPage 14
SS2Features & Specifications
IP Enclosures SS Range of grade 316 Stainless Steel electrical enclosures are suitable for general industrial applications.
Protection: Complies with IP55 IK10, NEMA 4x(Independent accredited test laboratory)
Standard: IEC62208, IEC/EN/AS60529(IEC61439 Compliant, Optional UL508A)
Material:- Body: 1.5mm Grade 316/316L Stainless Steel- Door: 1.5mm Grade 316/316L Stainless Steel- Device Mounting Plate: 1.5mm Galvanised Steel Sheet- Seal: Polyurethane
Surface Finish: 0.4 micron Ra surface brushed finish
Body: The robust monoblock body is fabricated using 1.5mm Grade 316/316L Stainless Steel. Cutting, pressing and full continuous seam welding using precision automated manufacturing equipment to ensure accuracy and consistent high quality. Flat face sealing surfaces are provided to increase seal life. Pre-fitted blind nutserts are incorporated to accommodate mounts and accessory fasteners to eliminate drilling and retain IP rating. Integral device plate mounts and M6 earth stud is provided.
Double Doors: The robust surface mounted doors are fabricated using 1.5mm Grade 316/316L Stainless Steel and incorporates concealed removable hinges with captive pins. The doors are designed to eliminate the central mullion to improve accessibility into the enclosure. The doors are designed for a 110° opening. Each door contains integral cable management rails, M6 earth stud and a high quality machine-applied foamed in place (FIP) Polyurethane seal. Two internal cable management rails can be removed to provide additional space for equipment, duct and door mounted control components.
Seal: A high quality machine-applied continuous foamed in place (FIP) Polyurethane seal provides excellent sealing over a long life.
Lock: A full range of locking solutions are available upon request. Standard locks are as follows:<1000mm high have 8mm square drive quarter turn lock with key.>1000mm high have 3 point locking system with key-lock swing handle.
Device Mounting Plate: The device mounting plate is fabricated using 1.5mm galvanised steel sheet, pressed to provide additional strength and supplied pre-fitted into enclosure as standard.
Incorporates many advanced features as standard - Fabricated using grade 316 stainless steel - Incorporates flat sealing face to improve seal life - Includes door cable rails - Includes nutserts for mounting brackets and accessories to retain IP rating - Includes mounting points for accessories including inner door escutcheons, rain hoods etc.
www.ipenclosures.comPage 15
SS1Stainless Steel Grade 316/316LSINGLE DOOR | IP66
www.ipenclosures.com
Part NumberUsable Depth (With Device
Plate)
Usable Depth (Without
Device Plate)Locks Weight
SKU H W D H1 W1 D1 D2 Qty (kg)
IP-SS302015 300 x 200 x 150 250 130 114 124 1 5
IP-SS303015 300 x 300 x 150 250 230 114 124 1 6
IP-SSL304020 300 x 400 x 200 250 330 164 174 1 9
IP-SS403015 400 x 300 x 150 350 230 114 124 1 8
IP-SS403020 400 x 300 x 200 350 230 164 174 1 9
IP-SS404020 400 x 400 x 200 350 330 164 174 1 11
IP-SSL406020 400 x 600 x 200 350 530 164 174 1 15
IP-SS504020 500 x 400 x 200 450 330 164 174 1 13
IP-SS504025 500 x 400 x 250 450 330 214 224 1 14
IP-SS505025 500 x 500 x 250 450 430 214 224 1 17
IP-SS604020 600 x 400 x 200 550 330 164 174 1 15
IP-SS604025 600 x 400 x 250 550 330 214 224 1 16
IP-SS606030 600 x 600 x 300 550 530 264 274 2 24
IP-SS606040 600 x 600 x 400 550 530 364 374 2 27
IP-SS705025 700 x 500 x 250 650 430 214 224 2 22
IP-SS806025 800 x 600 x 250 750 530 214 224 2 28
IP-SS806030 800 x 600 x 300 750 530 264 274 2 30
IP-SS806040 800 x 600 x 400 750 530 364 374 2 35
IP-SS808030 800 x 800 x 300 750 730 264 274 2 37
IP-SS1006030 1000 x 600 x 300 950 530 264 274 2 36
IP-SS1008030 1000 x 800 x 300 950 730 264 274 2 45
IP-SS1008040 1000 x 800 x 400 950 730 364 374 2 51
IP-SS1208030 1200 x 800 x 300 1150 730 264 274 2 53
Enclosure Device Plate
Page 16
SS2Stainless Steel Grade 316/316LDOUBLE DOOR | IP55
www.ipenclosures.com
Part NumberUsable Depth (With Device
Plate)
Usable Depth (Without
Device Plate)Locks Weight
SKU H W D H1 W1 D1 D2 Qty (kg)
IP-SS10010030 1000 1000 300 950 930 264 274 1 55
IP-SS10010040 1000 1000 400 950 930 364 374 1 62
IP-SS12010030 1200 1000 300 1150 930 264 274 1 62
IP-SS12010040 1200 1000 400 1150 930 364 374 1 72
IP-SS12012030 1200 1200 300 1150 1130 264 274 1 70
IP-SS12012040 1200 1200 400 1150 1130 364 374 1 82
Enclosure Device Plate
Page 17
The IP Enclosures SSSR range of grade 316/316L stainless steel 30° sloping roof single door enclosures are designed for extreme duty to house a variety of electrical switch and control equipment while preventing build-up of dust, debris and waste material. They are suitable for internal and external electrical installations for industrial, infrastructure, commercial, communications, defence, marine, food and beverage applications. All IP Enclosures are built to precision to ensure consistent high quality standards.
Mounted Electrical EnclosuresStainless Steel Grade 316/316L
30° SLOPING ROOF | SINGLE DOOR | IP66
SSSR-1
www.ipenclosures.comPage 18
SSSR-1Features & Specifications
IP Enclosures SSSR Range of grade 316/316L Stainless Steel 30° Sloping Roof electrical enclosures are designed to house a variety of electrical switch and control equipment while preventing build-up of dust, debris and waste material.
Protection: Complies with IP66 IK10, NEMA 4x
Standard: IEC62208, IEC/EN/AS60529
Material:- Body: 1.5mm Grade 316/316L Stainless Steel- Door: 1.5mm Grade 316/316L Stainless Steel- Device Mounting Plate: 1.5mm Galvanised Steel Sheet- Seal: Polyurethane
Surface Finish: 0.4 micron Ra surface brushed finish
Body: The robust monoblock body with 30° sloping roof is fabricated using 1.5mm Grade 316/316L Stainless Steel. Flat face sealing surfaces are provided to increase seal life. Pre-fitted blind nutserts are incorporated to accommodate mounts and accessory fasteners to eliminate drilling and retain IP rating. The roof consist of a 30° sloped roof design that protrudes past the seal, flush with the front of the door face. Integral device plate mounts and M6 earth stud is provided.
Door: The robust surface mounted door is fabricated using 1.5mm Grade 316/316L Stainless Steel and incorporates concealed removable hinges with captive pins. The door is designed for a 110° opening. Each door contains integral cable management rails, M6 earth stud and a high quality machine-applied foamed in place (FIP) Polyurethane seal.
Seal: A high quality machine-applied continuous foamed in place (FIP) Polyurethane seal provides excellent sealing over a long life.
Lock: 8mm square drive quarter turn lock with key. A full range of locking solutions are available upon request.
Device Mounting Plate: Fabricated using 1.5mm galvanised steel sheet, pressed to provide additional strength and supplied pre-fitted.
www.ipenclosures.com
Part NumberUsable Depth (With Device
Plate)
Usable Depth (Without
Device Plate)Locks Weight
SKU H W D H1 W1 D1 D2 LxW Qty Qty (kg)
IP-SSSR302015 300 x 200 x 150 250 130 114 124 110x56 1 1 6
IP-SSSR303015 300 x 300 x 150 250 230 114 124 110x56 1 1 7
IP-SSSR403020 400 x 300 x 200 350 230 164 174 214x95 1 1 10
IP-SSSR404020 400 x 400 x 200 350 330 164 174 214x95 1 1 12
IP-SSSR504025 500 x 400 x 250 450 330 214 224 214x95 1 1 15
IP-SSSR505025 500 x 500 x 250 450 430 214 224 364x95 1 1 19
IP-SSSR604025 600 x 400 x 250 550 330 214 224 214x95 1 1 18
IP-SSSR606030 600 x 600 x 300 550 530 264 274 364x95 1 2 30
IP-SSSR1007040 1000 x 700 x 400 950 630 364 374 364x95 1 2 45
Enclosure Device Plate Gland Plate
Page 19
Floor Standing Electrical CabinetsSteel | Powder-Coated
SINGLE DOOR | IP55
MF1S
IP Enclosures MF1S Range of powder-coated galvanised steel Floor Standing Electrical Cabinets for low voltage switchgear and controlgear assemblies are suitable for general industrial applications. All IP Enclosures are built to precision to ensure consistent high quality standards.
www.ipenclosures.comPage 20
Features & Specifications
IP Enclosures MF1S Range of powder-coated galvanised steel Floor Standing Electrical Cabinets for low voltage switchgear and controlgear assemblies are suitable for general industrial applications.
Protection: Complies with IP55 IK10(Independent accredited test laboratory)
Standard: IEC62208, AS/EN/IEC60529(IEC61439 Compliant)
Material:- Main Frame: 2.0mm Galvanised Steel W Profile System- Side, Rear & Roof Panels: 1.2mm Powder-Coated Galvanised Steel Sheet- Front Door: 2.0mm Powder-Coated Galvanised Steel Sheet- Mounting Plates: 1.5mm - 2.0mm Galvanised Steel Sheet- Seal: EPDM
Main Frame: The robust modular main structure is fabricated using 2.0mm galvanised steel sheet W Profile system with 20mm hole pattern.
Door: The robust door is fabricated using 2.0mm powder-coated galvanised steel sheet and incorporates four concealed reversible hinges. The door is designed for a 135° opening. Each door contains M5 earth studs and an A4 document pocket.
Side, Rear and Roof Panels: Removable panels are fabricated using 1.2mm powder-coated galvanised steel sheet.
Base: Base is 100mm
Door Seal: High quality EPDM replaceable door seal.
Lock: 4 point locking system with key-lock swing handle.
Device Mounting Plate: The device mounting plate is fabricated using 1.5-2.0mm mm galvanised steel sheet, pressed to provide additional strength.
Earthing: All panels are earthed to provide earthing continuity.
Surface Treatment: UL approved epoxy polyester powder-coated with a textured finish. 80-120 micron average thickness.- Colour: RAL7035- Colour of Base: RAL9005 (Other colours available upon request).
Accessories and Baying Kits: A full range of accessories are available including baying kits. Contact us for more information.
MF1S
www.ipenclosures.comPage 21
Floor Standing Electrical CabinetsStainless Steel Grade 316/316L
SINGLE DOOR | IP55
MF1SS
IP Enclosures MF1SS Range of grade 316 stainless steel Floor Standing Electrical Cabinets for low voltage switchgear and controlgear assemblies are suitable for general industrial applications. All IP Enclosures are built to precision to ensure consistent high quality standards.
www.ipenclosures.comPage 22
Features & Specifications
IP Enclosures MF1SS Range of grade 316 stainless steelFloor Standing Electrical Cabinets for low voltage switchgear and controlgear assemblies are suitable for general industrial applications.
Protection: Complies with IP55(Independent accredited test laboratory)
Standard: IEC62208, AS/EN/IEC60529(IEC61439 Compliant)
Material:- Main Frame: 2.0mm Grade 316/316L Stainless Steel W Profile System- Covers: 1.2mm Grade 316/316L Stainless Steel- Front Door: 2.0mm Grade 316/316L Stainless Steel- Mounting Plates: 1.5mm - 2.0mm Galvanised Steel Sheet- Seal: EPDM
Surface Finish: 0.4 micron Ra surface brushed finish
Main Frame: The robust modular main structure is fabricated using 2.0mm grade 316 stainless steel W Profile system with 20mm hole pattern.
Door: The robust door is fabricated using 2.0mm grade 316 stainless steel and incorporates four concealed reversible hinges. The door is designed for a 135° opening. Each door contains M5 earth studs and an A4 document pocket.
Side, Rear and Roof Panels: Removable panels are fabricated using 1.2mm grade 316 stainless steel.
Base: Base is 100mm
Door Seal: High quality EPDM replaceable door seal.
Lock: 4 point locking system with key-lock swing handle.
Device Mounting Plate: The device mounting plate is fabricated using 1.5-2.0mm mm galvanised steel sheet, pressed to provide additional strength.
Earthing: All panels are earthed to provide earthing continuity.
Accessories and Baying Kits: A full range of accessories are available including baying kits. Contact us for more information.
MF1SS
www.ipenclosures.comPage 23
Steel | Powder-Coated MF1S
www.ipenclosures.com
KIT Assembly Enclosure Side Panel Device Plate Base
SKU H W D SKU SKU SKU SKU
IP-MFS1624040-KIT 1620 x 400 x 400 IP-MFS1624040 IP-MFSP16240 IP-MFSM16240 IP-MFSB4040
IP-MFS1624060-KIT 1620 x 400 x 600 IP-MFS1624060 IP-MFSP16260 IP-MFSM16240 IP-MFSB4060
IP-MFS1624080-KIT 1620 x 400 x 800 IP-MFS1624080 IP-MFSP16280 IP-MFSM16240 IP-MFSB4080
IP-MFS1604040-KIT 1620 x 600 x 400 IP-MFS1604040 IP-MFSP16040 IP-MFSM16040 IP-MFSB6040
IP-MFS1626060-KIT 1620 x 600 x 600 IP-MFS1626060 IP-MFSP16260 IP-MFSM16260 IP-MFSB6060
IP-MFS1626080-KIT 1620 x 600 x 800 IP-MFS1626080 IP-MFSP16280 IP-MFSM16260 IP-MFSB6080
IP-MFS1628040-KIT 1620 x 800 x 400 IP-MFS1628040 IP-MFSP16240 IP-MFSM16280 IP-MFSB8040
IP-MFS1628060-KIT 1620 x 800 x 600 IP-MFS1628060 IP-MFSP16260 IP-MFSM16280 IP-MFSB8060
IP-MFS1628080-KIT 1620 x 800 x 800 IP-MFS1628080 IP-MFSP16280 IP-MFSM16280 IP-MFSB8080
IP-MFS16210060-KIT 1620 x 1000 x 600 IP-MFS16210060 IP-MFSP16260 IP-MFSM162100 IP-MFSB10060
IP-MFS16210080-KIT 1620 x 1000 x 800 IP-MFS16210080 IP-MFSP16280 IP-MFSM162100 IP-MFSB10080
IP-MFS16212060-KIT 1620 x 1200 x 600 IP-MFS16212060 IP-MFSP16260 IP-MFSM162120 IP-MFSB12060
IP-MFS16212080-KIT 1620 x 1200 x 800 IP-MFS16212080 IP-MFSP16280 IP-MFSM162120 IP-MFSB12080
IP-MFS1864040-KIT 1860 x 400 x 400 IP-MFS1864040 IP-MFSP18640 IP-MFSM18640 IP-MFSB4040
IP-MFS1864060-KIT 1860 x 400 x 600 IP-MFS1864060 IP-MFSP18660 IP-MFSM18640 IP-MFSB4060
IP-MFS1864080-KIT 1860 x 400 x 800 IP-MFS1864080 IP-MFSP18680 IP-MFSM18640 IP-MFSB4080
IP-MFS1866040-KIT 1860 x 600 x 400 IP-MFS1866040 IP-MFSP18640 IP-MFSM18660 IP-MFSB6040
IP-MFS1866060-KIT 1860 x 600 x 600 IP-MFS1866060 IP-MFSP18660 IP-MFSM18660 IP-MFSB6060
IP-MFS1866080-KIT 1860 x 600 x 800 IP-MFS1866080 IP-MFSP18680 IP-MFSM18660 IP-MFSB6080
IP-MFS1868040-KIT 1860 x 800 x 400 IP-MFS1868040 IP-MFSP18640 IP-MFSM18680 IP-MFSB8040
IP-MFS1868060-KIT 1860 x 800 x 600 IP-MFS1868060 IP-MFSP18660 IP-MFSM18680 IP-MFSB8060
IP-MFS1868080-KIT 1860 x 800 x 800 IP-MFS1868080 IP-MFSP18680 IP-MFSM18680 IP-MFSB8080
IP-MFS18610060-KIT 1860 x 1000 x 600 IP-MFS18610060 IP-MFSP18660 IP-MFSM186100 IP-MFSB10060
IP-MFS18610080-KIT 1860 x 1000 x 800 IP-MFS18610080 IP-MFSP18680 IP-MFSM186100 IP-MFSB10080
IP-MFS18612060-KIT 1860 x 1200 x 600 IP-MFS18612060 IP-MFSP18660 IP-MFSM186120 IP-MFSB12060
IP-MFS18612080-KIT 1860 x 1200 x 800 IP-MFS18612080 IP-MFSP18680 IP-MFSM186120 IP-MFSB12080
IP-MFS2024040-KIT 2020 x 400 x 400 IP-MFS2024040 IP-MFSP20240 IP-MFSM20240 IP-MFSB4040
IP-MFS2024060-KIT 2020 x 400 x 600 IP-MFS2024060 IP-MFSP20260 IP-MFSM20240 IP-MFSB4060
IP-MFS2024080-KIT 2020 x 400 x 800 IP-MFS2024080 IP-MFSP20280 IP-MFSM20240 IP-MFSB4080
IP-MFS2026040-KIT 2020 x 600 x 400 IP-MFS2026040 IP-MFSP20240 IP-MFSM20260 IP-MFSB6040
IP-MFS2026060-KIT 2020 x 600 x 600 IP-MFS2026060 IP-MFSP20260 IP-MFSM20260 IP-MFSB6060
IP-MFS2026080-KIT 2020 x 600 x 800 IP-MFS2026080 IP-MFSP20280 IP-MFSM20260 IP-MFSB6080
IP-MFS2028040-KIT 2020 x 800 x 400 IP-MFS2028040 IP-MFSP20240 IP-MFSM20280 IP-MFSB8040
IP-MFS2028060-KIT 2020 x 800 x 600 IP-MFS2028060 IP-MFSP20260 IP-MFSM20280 IP-MFSB8060
IP-MFS2028080-KIT 2020 x 800 x 800 IP-MFS2028080 IP-MFSP20280 IP-MFSM20280 IP-MFSB8080
IP-MFS20210060-KIT 2020 x 1000 x 600 IP-MFS20210060 IP-MFSP20260 IP-MFSM202100 IP-MFSB10060
IP-MFS20210080-KIT 2020 x 1000 x 800 IP-MFS20210080 IP-MFSP20280 IP-MFSM202100 IP-MFSB10080
IP-MFS20212060-KIT 2020 x 1200 x 600 IP-MFS20212060 IP-MFSP20260 IP-MFSM202120 IP-MFSB12060
IP-MFS20212080-KIT 2020 x 1200 x 800 IP-MFS20212080 IP-MFSP20280 IP-MFSM202120 IP-MFSB12080
Cabinet Size
*1200 Wide Cabinets = Double Door
*
*
Page 24
Stainless Steel Grade 316/316L MF1SS
www.ipenclosures.com
KIT Assembly Enclosure Side Panel Device Plate Base
SKU H W D SKU SKU SKU SKU
IP-MFSS1624040-KIT 1620 x 400 x 400 IP-MFSS1624040 IP-MFSSP16240 IP-MFSSM16240 IP-MFSSB4040
IP-MFSS1624060-KIT 1620 x 400 x 600 IP-MFSS1624060 IP-MFSSP16260 IP-MFSSM16240 IP-MFSSB4060
IP-MFSS1624080-KIT 1620 x 400 x 800 IP-MFSS1624080 IP-MFSSP16280 IP-MFSSM16240 IP-MFSSB4080
IP-MFSS1624040-KIT 1620 x 600 x 400 IP-MFSS1624040 IP-MFSSP16040 IP-MFSSM16040 IP-MFSSB6040
IP-MFSS1626060-KIT 1620 x 600 x 600 IP-MFSS1626060 IP-MFSSP16260 IP-MFSSM16260 IP-MFSSB6060
IP-MFSS1626080-KIT 1620 x 600 x 800 IP-MFSS1626080 IP-MFSSP16280 IP-MFSSM16260 IP-MFSSB6080
IP-MFSS1628040-KIT 1620 x 800 x 400 IP-MFSS1628040 IP-MFSSP16240 IP-MFSSM16280 IP-MFSSB8040
IP-MFSS1628060-KIT 1620 x 800 x 600 IP-MFSS1628060 IP-MFSSP16260 IP-MFSSM16280 IP-MFSSB8060
IP-MFSS1628080-KIT 1620 x 800 x 800 IP-MFSS1628080 IP-MFSSP16280 IP-MFSSM16280 IP-MFSSB8080
IP-MFSS16210060-KIT 1620 x 1000 x 600 IP-MFSS16210060 IP-MFSSP16260 IP-MFSSM162100 IP-MFSSB10060
IP-MFSS16210080-KIT 1620 x 1000 x 800 IP-MFSS16210080 IP-MFSSP16280 IP-MFSSM162100 IP-MFSSB10080
IP-MFSS16212060-KIT 1620 x 1200 x 600 IP-MFSS16212060 IP-MFSSP16260 IP-MFSSM162120 IP-MFSSB12060
IP-MFSS16212080-KIT 1620 x 1200 x 800 IP-MFSS16212080 IP-MFSSP16280 IP-MFSSM162120 IP-MFSSB12080
IP-MFSS1864040-KIT 1860 x 400 x 400 IP-MFSS1864040 IP-MFSSP18640 IP-MFSSM18640 IP-MFSSB4040
IP-MFSS1864060-KIT 1860 x 400 x 600 IP-MFSS1864060 IP-MFSSP18660 IP-MFSSM18640 IP-MFSSB4060
IP-MFSS1864080-KIT 1860 x 400 x 800 IP-MFSS1864080 IP-MFSSP18680 IP-MFSSM18640 IP-MFSSB4080
IP-MFSS1866040-KIT 1860 x 600 x 400 IP-MFSS1866040 IP-MFSSP18640 IP-MFSSM18660 IP-MFSSB6040
IP-MFSS1866060-KIT 1860 x 600 x 600 IP-MFSS1866060 IP-MFSSP18660 IP-MFSSM18660 IP-MFSSB6060
IP-MFSS1866080-KIT 1860 x 600 x 800 IP-MFSS1866080 IP-MFSSP18680 IP-MFSSM18660 IP-MFSSB6080
IP-MFSS1868040-KIT 1860 x 800 x 400 IP-MFSS1868040 IP-MFSSP18640 IP-MFSSM18680 IP-MFSSB8040
IP-MFSS1868060-KIT 1860 x 800 x 600 IP-MFSS1868060 IP-MFSSP18660 IP-MFSSM18680 IP-MFSSB8060
IP-MFSS1868080-KIT 1860 x 800 x 800 IP-MFSS1868080 IP-MFSSP18680 IP-MFSSM18680 IP-MFSSB8080
IP-MFSS18610060-KIT 1860 x 1000 x 600 IP-MFSS18610060 IP-MFSSP18660 IP-MFSSM186100 IP-MFSSB10060
IP-MFSS18610080-KIT 1860 x 1000 x 800 IP-MFSS18610080 IP-MFSSP18680 IP-MFSSM186100 IP-MFSSB10080
IP-MFSS18612060-KIT 1860 x 1200 x 600 IP-MFSS18612060 IP-MFSSP18660 IP-MFSSM186120 IP-MFSSB12060
IP-MFSS18612080-KIT 1860 x 1200 x 800 IP-MFSS18612080 IP-MFSSP18680 IP-MFSSM186120 IP-MFSSB12080
IP-MFSS2024040-KIT 2020 x 400 x 400 IP-MFSS2024040 IP-MFSSP20240 IP-MFSSM20240 IP-MFSSB4040
IP-MFSS2024060-KIT 2020 x 400 x 600 IP-MFSS2024060 IP-MFSSP20260 IP-MFSSM20240 IP-MFSSB4060
IP-MFSS2024080-KIT 2020 x 400 x 800 IP-MFSS2024080 IP-MFSSP20280 IP-MFSSM20240 IP-MFSSB4080
IP-MFSS2026040-KIT 2020 x 600 x 400 IP-MFSS2026040 IP-MFSSP20240 IP-MFSSM20260 IP-MFSSB6040
IP-MFSS2026060-KIT 2020 x 600 x 600 IP-MFSS2026060 IP-MFSSP20260 IP-MFSSM20260 IP-MFSSB6060
IP-MFSS2026080-KIT 2020 x 600 x 800 IP-MFSS2026080 IP-MFSSP20280 IP-MFSSM20260 IP-MFSSB6080
IP-MFSS2028040-KIT 2020 x 800 x 400 IP-MFSS2028040 IP-MFSSP20240 IP-MFSSM20280 IP-MFSSB8040
IP-MFSS2028060-KIT 2020 x 800 x 600 IP-MFSS2028060 IP-MFSSP20260 IP-MFSSM20280 IP-MFSSB8060
IP-MFSS2028080-KIT 2020 x 800 x 800 IP-MFSS2028080 IP-MFSSP20280 IP-MFSSM20280 IP-MFSSB8080
IP-MFSS20210060-KIT 2020 x 1000 x 600 IP-MFSS20210060 IP-MFSSP20260 IP-MFSSM202100 IP-MFSSB10060
IP-MFSS20210080-KIT 2020 x 1000 x 800 IP-MFSS20210080 IP-MFSSP20280 IP-MFSSM202100 IP-MFSSB10080
IP-MFSS20212060-KIT 2020 x 1200 x 600 IP-MFSS20212060 IP-MFSSP20260 IP-MFSSM202120 IP-MFSSB12060
IP-MFSS20212080-KIT 2020 x 1200 x 800 IP-MFSS20212080 IP-MFSSP20280 IP-MFSSM202120 IP-MFSSB12080
Cabinet Size
*1200 Wide Cabinets = Double Door
*
*
Page 25
IP66 19″ Data RacksSteel | Powder-Coated
SINGLE DOOR | IP66
SD
IP66 19” data racks are designed for heavy duty outdoor applications to house sensitive data network equipment in harsh environments. They are suitable for internal and external installations. All IP Enclosures are built to precision to ensure consistent high quality standards.
www.ipenclosures.comPage 26
Features & Specifications
IP Enclosures SD Range of IP66 19” data racks are designed for heavy duty outdoor applications to house sensitive data network equipment in harsh environments. They are suitable for internal and external installations. All IP Enclosures are built to precision to ensure consistent high quality standards.
Protection: Complies with IP66 IK10
Standard: AS/EN/IEC60529
Material:- Enclosure Body: 1.5mm galvanised steel sheet- Enclosure Door: 1.5mm galvanised steel sheet- 19” Data Rack Rails: 1.5mm galvanised steel sheet- Enclosure Seal: Polyurethane
Body: The robust monoblock body is 1.5mm galvanised steel sheet. Precision automated manufacturing equipment ensures accuracy and consistent high quality. Flat face sealing surfaces increase seal life. A galvanised steel gland plate is also incorporated into the bottom face.
Door: The surface mounted door is 1.5mm galvanised steel sheet. It incorporates concealed removable hinges with captive pins. Doors are also designed for a 110° opening. Each door contains integral cable management rails and a high quality machine-applied foamed in place (FIP) Polyurethane seal.
Door Seal: A high quality full perimeter seal provides excellent sealing over a long life. It is machine applied Polyurethane foamed in place (FIP).
Lock: 3 point locking system with key-lock swing handle. A full range of locking solutions are available upon request.
Gland Plate: Gland plates are incorporated into the bottom face of the enclosure for cable management. They are provided with gaskets and fasteners. The size and quantity vary according to enclosure size.
Surface Treatment: UL approved epoxy polyester powder-coated with a textured finish. 80-120 micron average thickness.- Colour: RAL7035 (Other colours available upon request).
www.ipenclosures.com
SD
Part Number Size No. of U (RU)
SKU 19" U/RU H W D
IP-SD606040 19" 12RU 600 x 600 x 400
IP-SD806040 19" 16RU 800 x 600 x 400
IP-SD806060 19" 16RU 800 x 600 x 600
IP-SD806080 19" 16RU 800 x 600 x 800
IP-SD1206040 19" 24RU 1200 x 600 x 400
IP-SD1206060 19" 24RU 1200 x 600 x 600
IP-SD1206080 19" 24RU 1200 x 600 x 800
IP-SD1606060 19" 32RU 1600 x 600 x 600
IP-SD2006060 19" 42RU 2000 x 600 x 600
IP-SD2006080 19" 42RU 2000 x 600 x 800
Cabinet Size
Page 27
IP66 19″ Data RacksStainless Steel Grade 316/316L
SINGLE DOOR | IP66
SSD
IP66 19” stainless steel data racks are designed for extreme duty to house sensitive data network equipment in harsh environments. They are suitable for internal and external installations.All IP Enclosures are built to precision to ensure consistent high quality standards.
www.ipenclosures.comPage 28
Features & Specifications
IP Enclosures SSD Range of IP66 19” stainless steel data racks are designed for extreme duty to house sensitive data network equipment in harsh environments. They are suitable for internal and external installations.
Protection: Complies with IP66 IK10
Standard: AS/EN/IEC60529
Material:- Enclosure Body: 1.5mm Grade 316/316L Stainless Steel- Enclosure Door: 1.5mm Grade 316/316L Stainless Steel- 19” Data Rack Rails: 1.5mm Grade 316/316L Stainless Steel- Enclosure Seal: Polyurethane
Surface Finish: 0.4 micron Ra surface brushed finish
Body: The robust monoblock body is fabricated using 1.5mm Grade 316/316L Stainless Steel. Cutting, pressing and full continuous seam welding using precision automated manufacturing equipment to ensure accuracy and consistent high quality. Flat face sealing surfaces are provided to increase seal life. A stainless steel gland plate is also incorporated into the bottom face.
Door: The robust surface mounted door is fabricated using 1.5mm Grade 316/316L Stainless Steel and incorporates concealed removable hinges with captive pins. The door is designed for a 110° opening. Each door contains integral cable management rails and a high quality machine-applied foamed in place (FIP) Polyurethane seal.
Door Seal: A high quality machine-applied continuous foamed in place (FIP) Polyurethane seal provides excellent sealing over a long life.
Lock: 3 point locking system with key-lock swing handle. A full range of locking solutions are available upon request.
Gland Plate: Gland plates are incorporated into the bottom face of the enclosure for cable management. They are provided with gaskets and fasteners. The size and quantity vary according to enclosure size.
www.ipenclosures.com
SSD
Part Number Size No. of U (RU)
SKU 19" U/RU H W D
IP-SSD606040 19" 12RU 600 x 600 x 400
IP-SSD806040 19" 16RU 800 x 600 x 400
IP-SSD806060 19" 16RU 800 x 600 x 600
IP-SSD806080 19" 16RU 800 x 600 x 800
IP-SSD1206040 19" 24RU 1200 x 600 x 400
IP-SSD1206060 19" 24RU 1200 x 600 x 600
IP-SSD1206080 19" 24RU 1200 x 600 x 800
IP-SSD1606060 19" 32RU 1600 x 600 x 600
IP-SSD2006060 19" 42RU 2000 x 600 x 600
IP-SSD2006080 19" 42RU 2000 x 600 x 800
Cabinet Size
Page 29
AccessoriesInner Doors
Each inner door kit is provided with a support frame to easily mount inside the enclosure without drilling.
Steel: 1.2-1.5mm galvanised steel sheet, powder-coated RAL7035 finish.
Stainless Steel: Grade 316/316L
Inner Doors Steel
Inner Doors Stainless Steel
H W D SKU SKU
300 x 200 x 150 IP-PSID3020 IP-SSID3020
300 x 300 x 150 IP-PSID3030 IP-SSID3030
300 x 300 x 200 IP-PSID3030 IP-SSID3030
300 x 400 x 200 IP-PSID3040 IP-SSID3040
400 x 300 x 150 IP-PSID4030 IP-SSID4030
400 x 300 x 200 IP-PSID4030 IP-SSID4030
400 x 400 x 200 IP-PSID4040 IP-SSID4040
400 x 600 x 200 IP-PSID4060 IP-SSID4060
500 x 300 x 150 IP-PSID5030 IP-SSID5030
500 x 300 x 200 IP-PSID5030 IP-SSID5030
500 x 400 x 200 IP-PSID5040 IP-SSID5040
500 x 400 x 250 IP-PSID5040 IP-SSID5040
500 x 500 x 200 IP-PSID5050 IP-SSID5050
500 x 500 x 250 IP-PSID5050 IP-SSID5050
600 x 400 x 200 IP-PSID6040 IP-SSID6040
600 x 400 x 250 IP-PSID6040 IP-SSID6040
600 x 600 x 200 IP-PSID6060 IP-SSID6060
600 x 600 x 300 IP-PSID6060 IP-SSID6060
600 x 600 x 400 IP-PSID6060 IP-SSID6060
700 x 500 x 200 IP-PSID7050 IP-SSID7050
700 x 500 x 250 IP-PSID7050 IP-SSID7050
800 x 600 x 200 IP-PSID8060 IP-SSID8060
800 x 600 x 250 IP-PSID8060 IP-SSID8060
800 x 600 x 300 IP-PSID8060 IP-SSID8060
800 x 800 x 200 IP-PSID8080 IP-SSID8080
800 x 600 x 400 IP-PSID8060 IP-SSID8060
800 x 800 x 300 IP-PSID8080 IP-SSID8080
800 x 800 x 400 IP-PSID8080 IP-SSID8080
1000 x 600 x 250 IP-PSID10060 IP-SSID10060
1000 x 600 x 300 IP-PSID10060 IP-SSID10060
1000 x 800 x 300 IP-PSID10080 IP-SSID10080
1000 x 800 x 400 IP-PSID10080 IP-SSID10080
1200 x 600 x 300 IP-PSID12060 IP-SSID12060
1200 x 800 x 300 IP-PSID12080 IP-SSID12080
1200 x 800 x 400 IP-PSID12080 IP-SSID12080
Enclosure
www.ipenclosures.comPage 30
AccessoriesRain Hoods
Rain Hoods Steel
Rain Hoods Stainless Steel
H W D SKU SKU
300 x 200 x 150 IP-PSRH2015 IP-SSRH2015
300 x 300 x 150 IP-PSRH3015 IP-SSRH3015
300 x 300 x 200 IP-PSRH3020 IP-SSRH3020
300 x 400 x 200 IP-PSRH4020 IP-SSRH4020
400 x 300 x 150 IP-PSRH3015 IP-SSRH3015
400 x 300 x 200 IP-PSRH3020 IP-SSRH3020
400 x 400 x 200 IP-PSRH4020 IP-SSRH4020
400 x 600 x 200 IP-PSRH6020 IP-SSRH6020
500 x 300 x 150 IP-PSRH3015 IP-SSRH3015
500 x 300 x 200 IP-PSRH3020 IP-SSRH3020
500 x 400 x 200 IP-PSRH4020 IP-SSRH4020
500 x 400 x 250 IP-PSRH4025 IP-SSRH4025
500 x 500 x 200 IP-PSRH5020 IP-SSRH5020
500 x 500 x 250 IP-PSRH5025 IP-SSRH5025
600 x 400 x 200 IP-PSRH4020 IP-SSRH4020
600 x 400 x 250 IP-PSRH4025 IP-SSRH4025
600 x 600 x 200 IP-PSRH6020 IP-SSRH6020
600 x 600 x 300 IP-PSRH6030 IP-SSRH6030
600 x 600 x 400 IP-PSRH6040 IP-SSRH6040
700 x 500 x 200 IP-PSRH5020 IP-SSRH5020
700 x 500 x 250 IP-PSRH5025 IP-SSRH5025
800 x 600 x 200 IP-PSRH6020 IP-SSRH6020
800 x 600 x 250 IP-PSRH6025 IP-SSRH6025
800 x 600 x 300 IP-PSRH6030 IP-SSRH6030
800 x 800 x 200 IP-PSRH8020 IP-SSRH8020
800 x 600 x 400 IP-PSRH6040 IP-SSRH6040
800 x 800 x 300 IP-PSRH8030 IP-SSRH8030
800 x 800 x 400 IP-PSRH8040 IP-SSRH8040
1000 x 600 x 250 IP-PSRH6025 IP-SSRH6025
1000 x 600 x 300 IP-PSRH6030 IP-SSRH6030
1000 x 800 x 300 IP-PSRH8030 IP-SSRH8030
1000 x 800 x 400 IP-PSRH8040 IP-SSRH8040
1200 x 600 x 300 IP-PSRH6030 IP-SSRH6030
1200 x 800 x 300 IP-PSRH8030 IP-SSRH8030
1200 x 800 x 400 IP-PSRH8040 IP-SSRH8040
Enclosure
www.ipenclosures.com
Rainhoods are often required to prevent settling and building up of liquids, corrosive solids, minerals, dust, dirt and debris on top of an electrical enclosure. If corrosive liquids and solids settle and build up on top of an electrical enclosure, the integrity of the electrical enclosure coating and material may be compromised which may lead to corrosion and ingress of liquids and solids into the enclosure. Without maintenance, this may compromise internal electrical components and could increase risk of electric shock.All IP Enclosures electrical enclosures are manufactured with nutserts to accommodate optional rain hoods without drilling. This ensures that the IP rating is maintained. IP Enclosure Rainhoods are provided with necessary fasteners to ensure fitting onto new or existing electrical enclosures is quick and easy.
Steel: 1.2-1.5mm galvanised steel sheet,powder-coated RAL7035 finish.
Stainless Steel: Grade 316/316L
Page 31
AccessoriesLouvre Vents & Vent Hoods
Vent HoodsFeatures and Benefits
IP Enclosures provide vent hoods to increase protection of vents, vent filters and internal components. The top of vent hoods are inclined to prevent settling and building up of liquids, corrosive solids, minerals, dust, dirt and debris on top of the vent hood. All IP Enclosures electrical enclosure vent hoods are manufactured with nutserts for ease of installation and gaskets to prevent crevice corrosion.
www.ipenclosures.com
Louvre VentsLouvre vents can be supplied loose or fitted to electrical enclosures.
Part Number Description
SKU H x W
IP-PSLV10075 100 x 75 Powder-Coated Louvre Vent
IP-PSLV130130 130 x 130 Powder-Coated Louvre Vent
Part Number Description
SKU H x W
IP-SSLV10075 100 x 75 Stainless Steel Louvre Vent
IP-SSLV130130 130 x 130 Stainless Steel Louvre Vent
Part Number Description
SKU H x W
IP-PSVH3020 300 x 200 x 50 Powder-Coated Vent Hood
IP-PSVH4030 400 x 300 x 50 Powder-Coated Vent Hood
IP-PSVH4737 475 x 375 x 75 Powder-Coated Vent Hood
Part Number Description
SKU H x W
IP-SSVH3020 300 x 200 x 50 Stainless Steel Vent Hood
IP-SSVH4030 400 x 300 x 50 Stainless Steel Vent Hood
IP-SSVH4737 475 x 375 x 75 Stainless Steel Vent Hood
Page 32
AccessoriesSun Shield Kits
IP Enclosures provide sun shields in Steel and Grade 316 Stainless Steel to suit all sizes of electrical enclosures and cabinets.
Features and Benefits
Sun shields (solar shields) are fitted to external surfaces to assist in controlling the internal temperature of the electrical enclosure or electrical cabinet. Generally, the temperature range of the electrical enclosure must maintain an internal temperature below the operating temperature range of internal components.
Materials and Fabrication
Sun shields are fabricated using precision automated manufacturing equipment to ensure accuracy and consistent high quality. Steel sun shields are fabricated using 1.2mm – 1.5mm galvanised steel sheet. UL approved epoxy polyester powder-coated with a textured RAL7035 finish to 80-120 micron average thickness. Coloured sun shields are available if required. Stainless Steel sun shields are fabricated using 1.5mm Grade 316/316L Stainless Steel.
www.ipenclosures.com
Part Number Description
SKU H x W
IP-SUNSS504020 Sun Shield Kit for 500x400x200 Stainless Steel Enclosure
IP-SUNSS606030 Sun Shield Kit for 600x600x300 Stainless Steel Enclosure
IP-SUNSS806030 Sun Shield Kit for 800x600x300 Stainless Steel Enclosure
Part Number Description
SKU H x W
IP-SUN504020 Sun Shield Kit for 500x400x200 Steel Enclosure
IP-SUN606030 Sun Shield Kit for 600x600x300 Steel Enclosure
IP-SUN806030 Sun Shield Kit for 800x600x300 Steel Enclosure
Page 33
AccessoriesFans & Filters
IP Enclosures provide a wide range of ventilation products for electrical enclosures. The new range consists of a modern Italian grill design with minimal external projection and allows for easy filter maintenance due to a front-opening grill. The configuration of the grill, seal gasket and filter mat provide an IP54 protection. All molded parts are made of highly resistant and self-extinguishing ABS. IP Enclosures ventilation products are manufactured to the highest quality in Italy.
FRONT GRILLOPENING
FILTER MAT REPLACEMENT
FILTER MATCLOSING
Part Number Description
SKU IP54 FILTERS
IP-V1000 Filter – 114 x 114 x 27 (mm)
IP-V2000 Filter – 150 x 150 x 37 (mm)
IP-V3000 Filter – 204 x 204 x 37 (mm)
IP-V4000 Filter – 250 x 250 x 38 (mm)
IP-V5000 Filter – 325 x 325 x 42 (mm)
SKU IP54 FAN FILTERS
IP-V1100 Fan Filter – 26m3/hr 114 x 114 x 73 (mm)
IP-V2200 Fan Filter – 58m3/hr 150 x 150 x 86 (mm)
IP-V3200 Fan Filter – 115m3/hr 204 x 204 x 104 (mm)
IP-V4200 Fan Filter – 125m3/hr 250 x 250 x 107 (mm)
IP-V4300 Fan Filter – 255m3/hr 250 x 250 x 128 (mm)
IP-V5400 Fan Filter – 550m3/hr 325 x 325 x 140 (mm)
SKU IP54 ROOF FANS & FILTERS
IP-RV1 Roof Vent (No Fan) – 400 x 350 x 120 (mm)
IP-RFV1 Roof Fan and Vent – 600m³/h 400 x 350 x 102 (mm)
IP-RFV2 Roof Fan and Vent – 860m³/h 400 x 350 x 102 (mm)
IP-RFV3 Roof Fan and Vent – 1000m³/h 400 x 350 x 102 (mm)
SKU 19" RACK FAN TRAYS
IP-RACKFAN2 Two Fan Unit 300m3/hr 240V-50/60Hz
IP-RACKFAN3 Three Fan Unit 300m3/hr 240V-50/60Hz
19” Rack Fan Tray
IP54 Roof Fans & Filters
IP54 Fans Filters
IP54 Filters
www.ipenclosures.com
Replace new filter matRemove old filter mat
Page 34
AccessoriesHeaters & Controllers
www.ipenclosures.com
IP Enclosures provide a wide range of heating products for electrical enclosures. Anti-condensation heaters are required to prevent failures or corrosion caused by low temperatures or high humidity inside the enclosure. This occurs when ambient temperature is low and the equipment does not generate enough heat to maintain the minimum internal temperature. IP Enclosures heating products are manufactured to the highest quality in Italy.
Part Number Description
SKU Compact Heater - H Range
IP-H75 75W Heater 140 x 59 x 61 (mm)
IP-H100 100W Heater 140 x 59 x 61 (mm)
IP-H150 150W Heater 220 x 59 x 61 (mm)
SKU Touch Safe Heater - TSH Range
IP-TSH25 25W Heater 125 x 41 x 41 (mm)
IP-TSH50 50W Heater 125 x 41 x 41 (mm)
IP-TSH75 75W Heater 140 x 63 x 70 (mm)
IP-TSH100 100W Heater 140 x 63 x 70 (mm)
IP-TSH150 150W Heater 220 x 63 x 70 (mm)
SKU Fan Assisted Heater - FH Range
IP-FH250 250W Heater 135 x 112 x 82 (mm)
IP-FH400 400W Heater 165 x 112 x 82 (mm)
IP-FH500 500W Heater 165 x 112 x 82 (mm)
IP-FH750 750W Heater 225 x 112 x 82 (mm)
Fan Assisted Heater - FH Range
Touch Safe Heater - TSH Range
Compact Heater - H Range
SKU Thermostats
IP-THNC1 Thermostat NC -10°/+50°C
IP-THNC2 Thermostat NC 0/+60°C
IP-THNC3 Thermostat NC +20/+80°C 61 x 34 x 35 (mm)
IP-THNO1 Thermostat NO -10/+50°C
IP-THNO2 Thermostat NO 0/+60°C
IP-THNO3 Thermostat NO +20/+80°C
Thermostats
Page 35
AccessoriesMounting Brackets & Stands
IP Enclosures provide a range of electrical enclosure mounting brackets and stands for steel and stainless steel electrical enclosures.
Each electrical enclosure is provided with rivnut nutserts to accomodate wall mounting brackets, eliminating the need for drilling to retain the integrity of the IP rating.
Wall Mounting BracketsIP-WMBKIT - Steel Electrical Enclosure Wall Mounting Bracket Kit with Fasteners.
IP-SSWMBKIT - Grade 316 Stainless Steel Electrical Enclosure Wall Mounting Bracket Kit with Fasteners.
Pole Mounting BracketsIP-PMP1200 - Steel Pole Mount Profile KitIP-PMC60 - Steel Pole Mount Clamp set 60mm ODIP-PMC89 - Steel Pole Mount Clamp set 89mm ODIP-PMC114 - Steel Pole Mount Clamp set 114mm OD
IP-SSPMP1200 - 316 Stainless Steel Pole Mount Profile KitIP-SSPMC60 - 316ss Pole Mount Clamp set 60mm ODIP-SSPMC89 - 316ss Pole Mount Clamp set 89mm ODIP-SSPMC114 - 316ss Pole Mount Clamp set 114mm OD
Floor Mounting StandsIP-STN-250 - 250 height stand painted steel, 4 piecesIP-STN-450 - 450 height stand painted steel, 4 piecesIP-STN-650 - 650 height stand painted steel, 4 piecesIP-STN-850 - 850 height stand painted steel, 4 pieces
IP-SS-STN-250 - 250 height stand 316ss, 4 piecesIP-SS-STN-450 - 450 height stand 316ss, 4 piecesIP-SS-STN-650 - 650 height stand 316ss, 4 piecesIP-SS-STN-850 - 850 height stand 316ss, 4 pieces
Note: Consult with your design engineer before mounting electrical enclosures to ensure structure has been adequately designed to withstand required forces.
www.ipenclosures.comPage 36
AccessoriesEarthing Kit, Data Rack Kit & Wiring Plan Pocket
Earthing KitStandard earthing kits are available.Earthing kits consist of:- Earth wire with 5mm ring connection- 2 x M5 Nuts (to suit electrical enclosure earth connection points)- Earth sticker labels- Instruction diagramEarth kits can be ordered as single units or bulk quantities.
IP-EK-01 KIT - Standard Earthing Kit
19” Data Rack Rail KitEasily convert a standard wall mounted electrical enclosure into an IP66 19″ Data Rack using our 19″ Data Rack Kit. Our standard wall mounted electrical enclosures are provided with mounting points to accommodate these 19″ Data Rack Kits without the need for drilling. Simply fit and tighten four nuts. These kits are designed to fit our 600mm wide IP66 wall mounted electrical enclosures.
Material: Grade 316 Stainless Steel
IP-SS19R600 - 19” 11RU to suit 600 x 600 Electrical EnclosureIP-SS19R800 - 19” 16RU to suit 800 x 600 Electrical Enclosure
Wiring Plan Pocket
IP Enclosures provide wiring plan pockets in plastic, steel and stainless steel to suit all sizes of enclosures.
Wiring plan pockets can be provided to fasten to the inside lower half of each access door to provide space for the storage of site documentation. Wiring plan pockets are sized to shroud unfolded, laminated A4 sized drawings and documents.
Plastic wiring plan pockets are 25mm deep and are provided with high quality self-adhesive foam tape to fasten to the inside of an electrical enclosure or electrical cabinet. Steel wiring plan pockets are 20mm deep and can be provided fitted to the inside of electrical enclosure doors on custom electrical enclosures.
Part Number IP-PCPPA4 – A4 wiring plan pocket.
www.ipenclosures.comPage 37
AccessoriesLED Lighting Solutions
SLIMLINE 24V DC LED Lighting – LF1BThe slimline LF1B 24V DC range of electrical LED lighting strips are super-bright and energy efficient. The slimline profile of 27.5mm wide x 16mm high enables mounting within tight spaces, compact control panels and switchboards. Mounting is achieved with ease using the mounting brackets supplied. Six sizes are available from 134mm long to 1080mm long to suit various sizes of electrical enclosures and switchboards.
STANDARD 12-24V DC LED Lighting – LF2BThe LF2B 24V DC range of electrical LED lighting strips are 40mm wide x 29mm high and are ideal for mounting inside electrical enclosures using the mounting brackets supplied. Three sizes are available from 210mm long to 580mm long. With a long lifespan, with approximately 54% less power consumption compared with fluorescent tube lighting, the LF2B series LED light strips are a bright choice now and in the future.
STANDARD 240V AC LED Lighting – LF2BThe LF2B 240V AC range of electrical LED lighting strips are 40mm wide x 29mm high and are ideal for mounting inside electrical enclosures using the mounting brackets supplied. Five sizes are available from 210mm long to 1080mm long. With an environmental rating of IP65 this unit can also be located externally, above or adjacent to the electrical enclosure or switchboard.
Part Number Operating Voltage Length Illumination DescriptionLF1B-NA3P-2THWW2-3M 24V DC 134mm Cool White 24V Slimline LED Strip 134mm, IP65 Clear cover, 3m CableLF1B-NB3P-2THWW2-3M 24V DC 210mm Cool White 24V Slimline LED Strip 210mm, IP65 Clear cover, 3m CableLF1B-NC3P-2THWW2-3M 24V DC 330mm Cool White 24V Slimline LED Strip 330mm, IP65 Clear cover, 3m CableLF1B-ND3P-2THWW2-3M 24V DC 580mm Cool White 24V Slimline LED Strip 580mm, IP65 Clear cover, 3m CableLF1B-NE3P-2THWW2-3M 24V DC 830mm Cool White 24V Slimline LED Strip 830mm, IP65 Clear cover, 3m CableLF1B-NF3P-2THWW2-3M 24V DC 1080mm Cool White 24V Slimline LED Strip 1080mm, IP65 Clear cover, 3m Cable
Part Number Operating Voltage Length Illumination DescriptionLF2B-B3P-BTHWW2-1M 12-24V DC 210mm Cool White 12-24V LED Strip 210mm, IP65 Clear cover, 1m Cable
Lorem ipsumLF2B-C3P-BTHWW2-1M 12-24V DC 330mm Cool White 12-24V LED Strip 330mm, IP65 Clear cover, 1m CableLF2B-D3P-BTHWW2-1M 12-24V DC 580mm Cool White 12-24V LED Strip 580mm, IP65 Clear cover, 1m Cable
www.ipenclosures.com
Part Number Operating Voltage Length Illumination DescriptionLF2B-B3P-ATHWW2-1M 100-240VAC 210mm Cool White 240V LED Strip 210mm, IP65 Clear cover, 1m CableLF2B-C3P-ATHWW2-1M 100-240VAC 330mm Cool White 240V LED Strip 330mm, IP65 Clear cover, 1m CableLF2B-D3P-ATHWW2-1M 100-240VAC 580mm Cool White 240V LED Strip 580mm, IP65 Clear cover, 1m CableLF2B-E3P-ATHWW2-1M 100-240VAC 830mm Cool White 240V LED Strip 830mm, IP65 Clear cover, 1m CableLF2B-F3P-ATHWW2-1M 100-240VAC 1080mm Cool White 240V LED Strip 1080mm, IP65 Clear cover, 1m Cable
IP Enclosures has partnered with IDEC Corporation to provide LED lighting solutions. IDEC’s LED Lights are brighter, longer-lasting, cost-effective and environmentally-friendly.
DOOR SWITCHLRC5A55 - Limit Switch Compact Adjustable Roller Lever Door Switch.
Page 38
AccessoriesLocking & Security Solutions
www.ipenclosures.com
Our electrical enclosures are supplied fitted with standard locks. However, to provide maximum flexibility, IP Enclosures also provide a full range of Mesan electrical enclosure locks, handles and security solutions. These can be supplied fitted upon request. Contact us for a full list of options.
Electromechanical locks & access control via RFID card, keypad or remote control.
Spare KeysIP-L004 - 3mm Double BitIP-L005 - 8mm Square
Dust CapIP-L003
Key Locakable Wing Knob22.3.25.W/K
Padlockable Wing KnobIP-L043
Padlockable SwinghandleIP-L006
Wing Knob316 Stainless SteelIP-L029
Keyed Wing Knob316 Stainless SteelIP-L028
Padlockable Wing Knob316 Stainless SteelIP-L031
IP69K Hygienic Lock316 Stainless SteelIP-L030
Padlockable Swinghandle316 Stainless SteelIP-L038
Custom Electrical Enclosures
www.ipenclosures.com
Do you buy electrical enclosures and then modify them by drilling, cutting holes or adding accessories? This could be costly. Save time, money and risk by ordering custom enclosures with holes pre-drilled and cut.
IP Enclosures provide an economical alternative for customers who require non-standard ‘custom’ enclosures. IP Enclosures supply custom IP rated enclosures ready for use to enable customers to reduce cost and deliver projects on time.
Simply contact our customer support team and tell us what you need. One of our support team will work with you to determine the best and most economical solution to suit your budget. We provide 2D drawings and 3D Models to refine the design and approve drawings prior to manufacture.
Custom enclosures can be manufactured as once-off prototypes or for large scale production runs.
One of the added benefits is that all modifications are incorporated into the enclosure during manufacturing prior to powder-coating for optimum surface protection.
We are a specialist electrical enclosure brand that specialises in electrical enclosures. You can be confident that your custom enclosure conforms to IEC62208 and IEC/EN/AS60529. We provide custom enclosures up to IP66, Nema 4, Nema 4x. This includes IP55, IP56, IP65 and IP66 rated enclosures.
Custom Enclosure Options- Non-standard shapes and sizes- Holes and cut-outs- Viewing windows- Custom paint or powder-coat colour- Anti-graffiti coating- Locking systems- Ventilation- Internal Shelves & Brackets...etc
Page 40
1
2
3
4
5
6
Degrees Of Protection - IP RatingsAustralian Standard IEC/EN/AS60529-2004 - Degress of protection by enclosures (IP Code)IEC/EN/AS60529 provides definitions for degrees of protection provided by enclosures of electrical equipment, with regard to protection of persons against access to hazardous parts inside the enclosure and protection of the equipment inside the enclosure against ingress of solid foreign objects and harmful effects due to the ingress of water.
IP 6 6IP CodeInternational Protection
First Characteristic NumeralDegrees of protection against access to hazardous parts and against solid foreign objects
Second Characteristic NumeralDegrees of protection against ingress of water
First Numeral Second NumeralProtected against solid objects 50mm in diameter or greater.A large surface of the body, such as a hand (no protection against deliberate access).
Protected against solid objects 12mmin diameter or greater.Fingers or similar objects not exceeding 80mm in length.
Protected against solid objects 2.5mmin diameter or greater.Tools, wires, etc., of diameter or thickness greater than 2.5mm.
Protected against solid objects 1mmin diameter or greater.Wires or other similar solid material of thickness greater than 1mm in diameter.
Dust protected.Dust does not enter in sufficient quantity to interfere with satisfactory operation of equipment.
Dust tight.No ingress of dust.
1
2
3
4
5
6
7
Protected against dripping water.Dripping water (vertically falling drops) shall have no harmful effect.
Protected against dripping water when tilted up to 15°.Vertically dripping water shall have no harmful effect when the enclosure is tilted at an angle up to 15°.
Protected against spraying water up to 60º from the vertical.Water falling as a spray at any angle up to 60° from the vertical shall have no harmful effect.
Protected against water splashing in all directions.Water splashing against the enclosure from any direction shall have no harmful effect.
Protected against water jets from all directions.Water projected by a nozzle against enclosure from any direction shall have no harmful effects.
Protected against heavy seas and water jets from all directions.Water from heavy seas or projected in powerful water jets shall not enter the enclosure in harmful quantities.
Protected against heavy seas and water jets from all directions.Ingress of water in harmful quantity shall not be possible when the enclosure is immersed in water.
www.ipenclosures.comPage 41
TM
www.ipenclosures.com
Protection in the toughest conditionsTM
© IP Enclosures 2019
IP EnclosuresABN 94 168 980 854GLOBAL DISTRIBUTIONHead Office: 8 Conara Rd Kunda Park QLD AUSTRALIA 4556T: + 61 7 5450 1489 | F: + 61 7 5453 [email protected]
®
®
Authorised Distributor: