Electrical Heating and CoolingElectrical Heating and Cooling

Solutions for the IndustrySolutions for the IndustryEN-C2000 revO

2

A European LeaderA European Leader

30 000 Customers in 100 countries

65 M€ Turnover

8 Plants

500 Employees

Key FiguresKey Figures

3

OEMs

EngineeringProjects

One-off Requests

Served MarketsServed Markets

4

Heating of Solids and of static or circulating Fluids (Liquids, Air, Gas)

• Heating Elements

• Cartridge Heaters, Band Heaters, Strip Heaters, Heating Plates, PTC Resistors, Bolt Heaters, Silicone Heating Panels, Heating Tapes, Cables with mineral Insulation, …

• Infrared Generators

• Industrial Radiators, Finned Strip Heaters, Duct Heaters, Fan Heaters, Hot Air Generators, ...

• Screw Plug Immersion Heaters, Ceramic Core Elements, Flexible Heating Hoses, Heating Belts, ...

• Flange Immersion Heaters, In-line Flow Heaters, …

Our Offer…Our Offer…

5

Process Temperature Control Systems andIndustrial Air Conditioning

Measurement and Temperature Control

• Thermostats, Temperature Probes PT, Thermocouples, Transmitters

• Displays, Measurement Converters, Communication Systems (Profibus, Device-net, Hart, Ethernet, Modbus, ...), PID controllers, ...

• Power supplies, Power units, Cabinets with integrated control and power units,...

• Process Temperature Control Systems to achieve: heating, heating/cooling, heating/cooling with a frigorific unit, ...

• Air Conditioners for Electrical Cabinets, Air/Water Heat Exchangers, Water Coolers, ...

Our OfferOur Offer

A unique global Offer

6

• Fuel gas conditioning for boiler start-up and gas turbines auxiliaries systems• TEG, MEG Dehydration• Natural gas heating to prevent from freezing before pressure reduction (compression and metering stations)• Liquefied natural gas heating and vaporizing• Gas Sweetening / Amine Gas treatment• Molecular Sieve Regeneration• Air/Gas separation processes

Oil Fractioning and Polymerization - Gas Treatment

Main offshore & onshore applications:Main offshore & onshore applications:

• Wellhead Crude oil heating for viscosity

• Suction line heating for storage tank

Oil Conditioning

• Continuous Catalyst Regeneration • Reactor catalyst beds temperature control

. Hydrotreating

. Hydrocraking• Isomerization• KO/Flare Drum Vapour/Liquid separator

• Fuel oil forwarding for boiler/turbine

• Waste Oil Heating

Engineering Projects

Oil & GasOil & Gas

7

• Onshore field oil heater 4 x ND 12“• 420 kW / 230°C - 40 bar• PED 97/23/EC Cat IV• Design : ASME VIII div 1

• H2/N2 heater ND 24“• 680 kW / 450°C - 25 bar• Design : AD 2000

• Offshore fuel gas heater• ND 24 “ - 1480 kW - 49 bar• ATEX Certification : II 3 G IIA T3

Heater : II 2 G Ex de IIC T3

Junction Box: II 2 G Ex e II T3

• Flange heater ND 700 for large storage tank• 680 kW

• Offshore Compression gas pre-heater• ND 12 “ – 230 kW - 30 bar• ATEX Certification : II 2 G Ex e II T3

• Power panel 1100 A• 100% thyristors• Remote control cabinet

• 4 x ND 8“ - 380 kW - 300°C• Design : CODAP• PED 97/23/EC - Cat IV• Self certified assembly : II 3 G IIC T390°C

--

-

• Power and PID temperature control panel• 675 A/400 V 3 ph• 4 power stages• 100% thyristors

Onshore LNG Vaporiser

Engineering Projects

Some customized SolutionsSome customized Solutions

. 18-points individual flexible dual K-type thermocouple assembly for catalyst bed temperature measurement.. Design: 105 bar/ 445°C. ATEX certified II 2 G Ex d IIC T3

. 12-points individual flexible dual K-type thermocouple assembly for CCR unit. Wall-mount remote enclosure, Intrinsic safety Ex"ia" protection mode . ATEX certified II 1 G Ex ia IIC T3

8

Some Customers Some Customers references:references:

Engineering companies & Integrators End Users

AKER PROCESS SYSTEMS (Europe)AIR LIQUIDE (Europe + China)AIR PRODUCTS (Europe)ALFA LAVAL (Europe)AXENS (Europe)BHPV (India)CHINA FIRST HEAVY INDUSTRIES (China)DSME (Korea)EIED (Iran)ENGINEERS INDIA LIMITED (India)FOSTER WHEELER (Europe)GEA (Europe)GS E&CORPORATION (Korea)JAPAN STEEL WORKS (Japan)KBR (USA)KOBELCO (Japan)LARSEN & TOUBRO (India)LINDE (Europe)MESSER (Europe)SEI (China)LURGI (Europe)PROSERNAT (Europe)PUNJ LLOYD (India)SAIPEM (Europe)TECHNICAS REUNIDAS (Europe)TECHNIP (Europe + India)UHDE (Europe + India)PETROFAC (Russia)

ARAMCO (Saudi Arabia)AROMATICS OMAN (Sultanate of Oman)ARAK Petrochemical (Iran)BAYEROIL (Europe + Qatar)BP (Europe)CPCL/ INDIANOIL (India)ENOC PROCESSING (Dubai)EXXON MOBIL(Europe)HPCL MITTAL ENERGY (India)IFP (Europe)IOCL (India)NIOC (Iran)PETROBAS (Brazil)PETROCHINA /CNPC (China)PETRONAS (Malaysia)QAPCO (Qatar)SINOPEC ( China)GRT GAZ/ STORENGY (Europe)SHELL (Europe + Qatar) STATOIL (Europe)IRANIAN OFFSHORE (Iran)LUKOIL (Russia)PDVSA (Venezuela) SASOL (South Africa)TOTAL (Worldwide)

Engineering Projects

Oil & GasOil & Gas

9

• ND 20 up to ND 600• 1 up to 61 heating rods• Heating power up to 2500 kW

An unique advanced technologyAn unique advanced technology

• Material: SS 316L or INCONEL 600• Load: 0,5 up to 80 W/cm2• Available ATEX certification: Ex d IIC T1..T6• PED 97/23/EC CompliancePED 97/23/EC Compliance

• • Low inertiaLow inertia• • CompactCompact• • ReactiveReactive

The solution for high pressure and high temperature applicationsThe solution for high pressure and high temperature applications

« High Load » heating rods« High Load » heating rods

Engineering Projects

Compatherm HeatersCompatherm Heaters

10

• Available sizes : ND 100 up to ND 1000.• Material: painted steel or stainless steel.

• Thermocouples J or K type, RTD probes, Thermostats.• Temperature transmitters with Hart, Profibus PA, FieldBus communication protocols.• Ex d flameproof enclosures or Ex ia intrinsically safety protection.

“ “ Ex d” Flameproof enclosuresEx d” Flameproof enclosures

““Ex e” Increased safety enclosuresEx e” Increased safety enclosures

““Ex de” Flameproof & Increased safetyEx de” Flameproof & Increased safetyenclosuresenclosures

Available temperature control devicesAvailable temperature control devices

• Available sizes : ND 40 up to ND 500.• Material: Cast iron, painted steel or stainless steel.

• Available sizes : ND 40 up to ND 700.• Material : painted aluminium, steel or stainless steel

Engineering Projects

Explosion protection typesExplosion protection types

11

• ISO 9001 v 2008• 97/23/EC PED up to category IV • 94/9/EC ATEX• IECEx • GOST• VDE• UL• GL• CCOE

Highly Integrated State-of-the-Art Industrial MeansHighly Integrated State-of-the-Art Industrial Means

Design:Design:

Integrated Manufacturing:Integrated Manufacturing:

Certifications:Certifications:

Tests:Tests:

• Heating elements manufacturing.• Machining (drilling, turning, grinding) of   mechanical components.• Printed circuit board assembling.• Mechanical and hydraulical assembling.• Welding .• Wiring. • Sheet metal working and painting.• Bench testing.

• Non destructive: liquid penetrant, X-ray, ultrasonic, Positive Material Identification...• Hydrostatic.• Helium leakage.• Electrical isolation and dielectrical rigidity in cold and/or hot conditions.• Harmonic and temperature rise of thyristors• Functional.

Dedicated Projects Teams:Dedicated Projects Teams:

• Advise• Sizing• Project follow-up

• Commissioning & Start-up assistance• Final documentation• After sales service

• Thermal :   with homemade softwares• Mechanical : • Calculation notes according to:    - AD - Merkblatt.   - ASME VIII div 1.    - CODAP.    - STOOMWEZEN. • 3D CAD (Solidworks).• Hydraulical.• Electrical.• Electronical:   - Hardware.    - Software.

Engineering Projects

Vulcanic’s ExpertiseVulcanic’s Expertise

A competitive Differentiation forA competitive Differentiation for

YOURYOURElectrical Heating and Cooling SolutionElectrical Heating and Cooling Solution