MegaWatt Solutions � of �1 8 Training Centre
Electrical Power System - Protection, Automation and Control
The requirement for high voltage power networks in the 21st century is to deliver maximum power, with an extremely small margin for downtime. This achievement exists through the careful implementation of appropriate network components and an applicable protection system, which reacts quickly and selectively to an abnormal power system condition.
www.megawattsolutions.co.za
Modern day power
system technology meet these requirements, but
the challenge moves to the user to implement the technology
to deliver an optimum and trustworthy
performance.
MegaWatt Solutions � of �2 8 Training Centre
Most users face quite a challenge migrating from electromechanical relays to the modern day microprocessor based IED’s.…
The personal of Megawatt Solutions have trained users since 1998 on microprocessor based relays and know which pitfalls to highlight during training.
www.megawattsolutions.co.za
IED Logic
Protection Function Algorithm
Measurement
Communications
The Challenge
Unwanted Power Outages
Loss of Revenue
Unhappy Customers / End Users
Damaged Equipment
The Result…
The Response.
MegaWatt Solutions � of �3 8 Training Centre
The directors current combined experience of over 40 years, executing projects for utilities, counsels, industry and suppliers, as well as our excellent network of colleagues in this industry, will ensure that we offer the best guidance on the training we offer.
We know that training is ongoing and with the current economy this target could to be a challenge. With this in mind we will make sure that you get the best offer.
Cost
Refer to our attach list for available courses and prices.
Travel and Accommodation are added additional for training outside Pretoria area.
Schedule
Training is provided via two arrangements:• Trough scheduled courses. We will notify our customers via mail or you can download the
information from our website.• Training for a technical group in a company. Please contact us directly.
General
If there is something missing please enquire about it.
For any further queries regarding our training solutions, please contact Kobus Theunissen at 0824980161 or send an email to [email protected]
We thank you for your interest and look forward to your response!!
www.megawattsolutions.co.za
MegaWatt Solutions � of �4 8 Training Centre
MegaWatt Solutions Course Library
Course Number Content
MEG101 Industrial power network fundamentals and recommended protection
This course introduce the student to the fundamentals of the power system network up to 44kV
The following topics are discussed:- Safety- Applicable network theory and network topologies- Network components- Fault levels - Recommended protection
Duration: 3 daysRequired Equipment: N/A
MEG102 Power network fundamentals and recommended protection for sub-transmission and transmission applications (45kV - 765kV)
This course introduce the student to the fundamentals of the power system network up to 765kV
The following topics are discussed:- Safety - Applicable network theory and network topologies- Network components - Fault levels and recommended protection
Duration: 3 daysRequired Equipment: N/A
MEG103 Busbar protection
The student will be exposed to the various engineering principles for Busbar Protection for HV and EHV substations
Duration: 1 day Required Equipment: N/A
www.megawattsolutions.co.za
MegaWatt Solutions � of �5 8 Training Centre
MEG104 Motor Protection
The student will be introduced to the various types of electrical faults that can occur on an electrical motor and how the protection detects this.
Duration: 1 Day Required Equipment: N/A
MEG105 Directional O/C and E/F protection
The student will be introduced to the principal of directional overcorrect and earth fault and the various ways to apply this protection.
Duration: 1 DayRequired Equipment: N/A
MEG106 Practicals - Testing of a protection element
The student will have the opportunity to test a protection element or IED in the classroom, for a better understanding of the operation of the IED or metering unit.
Duration: Per day
MEG106 Protecting a Power Transformer
This course introduce the student to the fundamentals of Protection applied to a Power Transformer.
The following topics are discussed:- Applicable transformer theories and components- Fault levels and recommended protection
Duration: 1 Day Required Equipment: N/A
www.megawattsolutions.co.za
MegaWatt Solutions � of �6 8 Training Centre
MegaWatt Solutions Course Library
Course Number Content
ABB Relion - MV Products - Project Related Training
GENERAL - OPERATORS
TRAINING
This course will train the responsible person on the following:- Interpretation of information displayed on IED- Recording / downloading of information from IED- Reset the IED / Energise the power circuit
Duration: 1 DayRequired Equipment: PC if possible. IED’s are provided.
MEG201 REx 605 series - Operators Training
MEG202 REx 610 series - Operators Training
MEG203 REx 615 series - Operators Training
MEG204 REx 620 series - Operators Training
MEG205 REx 630 series - Operators Training
GENERAL - ENGINEERING
TRAINING
This course will train the responsible person on the following:- User interface software - PCM600- Hardware and software options- Engineering of IED
Duration: 2.5 DaysRequired Equipment: PC
MEG206 REx 605 series - Engineering Training
MEG207 REx 610 series - Engineering Training
MEG208 REx 615 series - Engineering Training
MEG209 REx 620 series - Engineering Trainingwww.megawattsolutions.co.za
MegaWatt Solutions � of �7 8 Training Centre
MEG210 REx 630 series - Engineering Training
MEG211 Relion 650 / 670 Operators Training - Please enquire about this training
MEG212 Relion 650 / 670 General Engineering Training - Please enquire about this training.
MEG213 REB500 Operators Training - Please enquire about this training
www.megawattsolutions.co.za
MegaWatt Solutions � of �8 8 Training Centre
MegaWatt Solutions Course Library
Course Number Content
IED’s from SEL
MEG301 Please enquire on which IED model training is required.
IED’s from Siemens
MEG302 Please enquire on which IED model training is required.
IED’s from Alstom
MEG303 Please enquire on which IED model training is required.
IED’s from Schneider - SEPAM
MEG304 Please enquire on which IED model training is required.
www.megawattsolutions.co.za