Printer-friendly format 3M Mining - Mexico Product CatalogueThis Product Catalog has been created to offer a comprehensive view of products sold to our Mexican mining customers.Disclaimer:Not all products in this 3M Mining Mexico products catalog are available in all countries. Interested parties should contact their local 3M country representatives for product availability.
Make a Selection
Electrical SolutionsThis section contains products for the following groups: Cable cleaning products, cable locators, splices, terminations, tapes, heat tracers, jacketing products and lubricants. 3M has the solution for all your electrical needs.
Maintenance SolutionsFix it, Build it, Clean it - 3M Mining provides the abrasives, adhesives, tapes and cleaners to help your maintenance department keep your operations running efficiently.
Mining Specific3M Mining presents solutions specifically tailored to the needs of the mining and metals industry.
Site SafetySite Safety covers a wide range 3M Products, covering Fire Protection, Sorbents, Tapes and Safety-Walk™ products.
Worker SafetyLet 3M Mining help you provide the products required for worker safety at mining and industrial sites.
This section contains products for the following groups: Cable cleaning products, cable locators, splices, terminations, tapes, heat tracers, jacketing products and lubricants. 3M has the solution for all your electrical needs.
Make a Selection
Cable Cleaning System CC-SeriesThis cable cleaning system cleans cable insulation, metal, electrical, and mechanical parts. CC Series solvent is also suitable for use on transformers, generators, motors and metal parts of all sorts.
Electrical SplicesThe following splice solutions can help you reduce the time, labor and cost involved in a variety of electrical cable splicing applications. The product line covers splicing needs from 0-600V to 35kV applications.
Electrical Tape3M invented vinyl electrical tape and sets the industry standard for quality with a tape for nearly every electrical application. Such electrical tape applications include: marking, insulating, and splicing.
Electrical Terminations3M terminations offer easy installation and reliable performance when terminating shielded and non shielded, single and three-conductor, and indoor and outdoor medium voltage cables.
Infrared ThermometersInfrared thermometers are highly accurate and easy-to-use, portable non-contact (infrared) thermometer. It is an invaluable tool for monitoring operating termperatures of mechanical and electrical , plant and production equipment without removing the equipment from service.
Jacketing ProductsProtect and repair damaged electrical cable jacketing with heat shrink cable sleeves, jacket repair kits, and resins.
Lubricant ProductsWire pulling lubricants are designed for specific applications, so you can choose the right lubricant for the job at hand. You can count on 3M reliability through high pulling forces, extreme temperature changes, wet weather and the damaging effects of time.
Fix it, Build it, Clean it - 3M Mining provides the abrasives, adhesives, tapes and cleaners to help your maintenance department keep your operations running efficiently.
Make a Selection
Abrasive Products3M carries a number of premium engineered abrasives and convenient all-purpose abrasive products for all mining and industrial applications.
Adhesive Products3M adhesives provide solutions for bonding, sealing, fastening, and many other needs in the mining and metals industry.
Cleaning ProductsUse 5-Way Penetrant, Citrus Based Cleaner, High Performance Cloths and Silicone Lubricant to keep your operations clean and running efficiently.
Tape Products3M has a large product family of tapes including: Duct, Aluminum, Glass Cloth, Double Coated, Foam, Masking, Film, Sealing, Safety Stripe, Luminous, Vinyl and Electroplating Tapes.
3M Mining presents solutions specifically tailored to the needs of the mining and metals industry.
Make a Selection
BR (Belt Repair) Kit3M BR - Belt Repair Kit can be used to repair small nicks and cuts in many industrial belts.
Glass BubblesGlass bubbles incorporated into emulsion formulations as a sensitizing agent can improve blast efficiency and relizbility. A broad range of densities and strengths are available to match a wide range of slurry and emulsion requirements.
Site Safety covers a wide range 3M Products, covering Fire Protection, Sorbents, Tapes and Safety-Walk™ products.
Make a Selection
Fire Protection ProductsFire protection products help to prevent fire, smoke, toxic fumes and moisture from passing through penetrations in fire-rated walls and floors. These easy-to-install products are suitable for a wide variety of firestop applications, including plastic pipes, metal pipes, HVAC ductwork, cables, construction gaps, grease ducts, wall tops and control joints.
SorbentsSorbent products are available in many shapes and sizes to meet all spill response needs, and can be used in a wide variety of applications ranging from simple maintenance to emergency spills and cleanups.
Traffic Control ProductsThese products are for site traffic safety, control and guidance. From Clean-Walk™ mats to Safety-Walk™ this group of products ensures a safer working environment.
Let 3M Mining help you provide the products required for worker safety at mining and industrial sites.
Make a Selection
Eye ProtectionIncludes: Safety, protective and visitor eyewear.
Hearing Protection3M offers a wide variety of solutions to help reduce noise exposure. A full line of comfortable, easy-to-use hearing protectors, including ear plugs, ear muffs, and banded hearing protectors are available.
Respiratory3M Respirators are lightweight, comfortable and easy to breathe through. Using expertise in filtration technologies and blown microfiber capabilities, 3M offers a family of respirators that meet workers needs for comfort and value.
http://products3.3m.com/catalog/ww/en001/mining/-/node_4...e_ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 10:59:09 AM
Select a Location
English
By Keyword
3M Global Mining : Maintenance Solutions
3M Worldwide : Global : Mining
Product Catalog for 3M Mining
Maintenance Solutions
[click to enlarge]
Fix it, Build it, Clean it - 3M Mining provides the abrasives, adhesives, tapes and cleaners to help your maintenance department keep your operations running efficiently.
Make a Selection
Abrasive Products3M carries a number of premium engineered abrasives and convenient all-purpose abrasive products for all mining and industrial applications.
Adhesive Products3M adhesives provide solutions for bonding, sealing, fastening, and many other needs in the mining and metals industry.
Cleaning ProductsUse 5-Way Penetrant, Citrus Based Cleaner, High Performance Cloths and Silicone Lubricant to keep your operations clean and running efficiently.
Tape Products3M has a large product family of tapes including: Duct, Aluminum, Glass Cloth, Double Coated, Foam, Masking, Film, Sealing, Safety Stripe, Luminous, Vinyl and Electroplating Tapes.
Product Catalog for 3M Mining Maintenance Solutions
Printer-friendly format Abrasive Products
[click to enlarge]
3M carries a number of premium engineered abrasives and convenient all-purpose abrasive products for all mining and industrial applications.
Make a Selection
3M Scotch-Brite Disc CS-RD 115 mm x 22 mm3M Scotch-Brite Disc CS-RD 115 mm x 22 mm
3M™ Belt Pack 518S, 1/2 in x 18 in, 5 per caseConvenient introductory pack of Scotch-Brite™ surface conditioning and 3M™ coated abrasive belts.
3M™ Cloth Belt 761D, 3 in x 24 in P120 Y weight Filmlok, 5 per inner 25 per caseA Cubitron™ abrasive grain cloth belt constructed on a Y weight, strong, durable cloth backing. Resin bonded for heat resistance. Grade: P120. Primary markets: metalworking, woodworking.
3M™ Cloth Sheet 011K, 9 in x 11 in Fine, 50 per inner 250 per caseSheet constructed on a J weight, light and flexible cloth backing. Grade: FINE. Primary markets: metalworking, woodworking.
3M™ Mini Mandrel 935, 2 7/8 in x 1/4 in, 5 per caseUse with 1 inch wide x 1 1/2 inch long sheets of Scotch-Brite™ material to fit into tight area.
3M™ Roloc™ Disc Pack 983S, 3 in, 5 packs per caseConvenient introductory pack includes 3 inch diameter Roloc™ surface conditioning discs, 3M coated abrasive discs and Roloc disc pad. An easy way to evaluate the right product, size and grade for your application.
3M™ Twist-Lok™ Pad Holder 961, 10/caseSpecially designed for use with 3M hand pads to make clean up jobs faster, easier, and safer. Distributes pressure evenly over pad surface for efficient cleaning action and improved pad life.
Abrasive Flap Disc 747DA Cubitron™ abrasive grain abrasive flap disc constructed on a X weight, durable cloth backing. Resin bonded for heat resistance.
Fiber DiscsGeneral purpose discs for a variety of grinding and removal jobs.
http://products3.3m.com/catalog/ww/en001/mining/-/nod...w_globalmining_3_0/command_AbcPageHandler/output_html (1 of 2)22/11/2006 10:59:28 AM
Select a Location
English
By Keyword
3M Global Mining : Abrasive Products
Green Corps™ WheelsWheel is designed to provide high cut rates and long life on most all materials including fiberglass, stainless steel, mild steel and aerospace alloys. Ideal for use on a wide variety of utility type cut-off tools.
Radial Bristle DiscsDurable radial plastic disc for thin coating removal.
Scotch-Brite EXL Deburring WheelHigh performance and durability for deburring and finishing applications.
Scotch-Brite Multi-Flex Abrasive Sheet RollsUltra flexible and conformable for cleaning or fine finishing.
Scotch-Brite™ and Roloc™ Bristle DiscsBristle technology provides a uniform concentration of mineral throughout the flexible abrasive filled bristles.
Scotch-Brite™ Clean and Strip Disc, 6 in x 1/2 in S XCS, 15 per caseAggressive, open-web disc for cleaning welds, removing rust and paint. May be mounted on a straight shaft tool or bench motor. Abrasive mineral: Extra coarse grade silicon carbide. Color: Black MOS: 4000 RPM
Scotch-Brite™ Coating Removal Disc, 4 1/2 in x NH S XCS Bulk, 40 per caseHeavy duty, semi-open web used to clean rust and paint. Contains a backing that mounts to hook and loop pads. Abrasive mineral: Extra Coarse grade silicon carbide. Color: Black MOS: 12000 RPM
Scotch-Brite™ Roloc™ TR Surface Conditioning DiscsA non-woven abrasive product used for cleaning, finishing, blending and deburring applications.
Scotch-Brite™ Surface Conditioning DiscsA non-woven abrasive product used for cleaning, finishing, blending and deburring applications. Contains a backing that mounts to hook and loop pads.
Product Catalog for 3M Mining Maintenance Solutions
Printer-friendly format Adhesive Products
[click to enlarge]
3M adhesives provide solutions for bonding, sealing, fastening, and many other needs in the mining and metals industry.
Make a Selection
3M™ Hi-Tack 76 Classic Spray Adhesive Original Formula, 24 oz, 12 per case, Not for sale or use in CA & other states. Consult local air quality rules before use.Not for sale or use in CA and other states. Consult local air quality rules before use. Quick-tacking, fast strength buildup. Aerosol, for bonding hard to hold materials like polyethylene and polypropylene. SBR rubber, fabric and felt.
3M™ Scotch-Grip™ Industrial Adhesive 4799 Black, 5 oz tube, 36 per caseA black, brushable, heat resistant adhesive that develops strength rapidly and provides good creep resistance and low soak-in on porous surfaces. Bond rubber (including EPDM) and many materials such as canvas and linoleum to metal, wood and concrete.
3M™ Scotch-Grip™ Plastic Adhesive 4475 Clear, 5 oz tube, 36 per caseA clear, general purpose adhesive that dries rapidly. Has excellent resistance to plasticizers, water, detergent , and soap solutions. Can be used to bond many ceramics, glass, leather, cloth and vinyls to themselves and a wide variety of substrates.
3M™ Scotch-Grip™ Rubber And Gasket Adhesive 847 Brown, 1 qt, 12 per caseA premium quality, reddish brown, multi-purpose adhesive. Develops strong flexible bonds very rapidly to a wide variety of substrates, including many plastics and rubbers, gasketing materials and leather. Has exceptional resistance to most fuels and oil.
3M™ Scotch-Grip™ Rubber And Gasket Adhesive 1300 Yellow, 1 qt, 12 per caseA yellow, premium quality, versatile, brushable, heat resistant adhesive that develops strength rapidly. Has excellent adhesion to metal, bake enamel, wood, most plastics, and neoprene, reclaim, SBR, and butyl rubber. NOT for EPDM rubber.
3M™ Scotch-Grip™ Rubber And Gasket Adhesive 1300 Yellow, 5 oz tube, 36 per caseA yellow, premium quality, versatile, brushable, heat resistant adhesive that develops strength rapidly.
3M™ Scotch-Weld™ Acrylic Adhesive DP805 Light Yellow, 1.6 fl oz or 47 ml, 12 per caseTwo-part, high performance, toughened acrylic adhesive. It has a 1:1 mix ratio and exhibits exceptional overlap shear and peel strength to both metallic and plastic surfaces. It also exhibits excellent environmental resistance with a 4 minute worklife.
http://products3.3m.com/catalog/ww/en001/mining/-/nod...w_globalmining_3_0/command_AbcPageHandler/output_html (1 of 2)22/11/2006 10:59:41 AM
Select a Location
English
By Keyword
3M Global Mining : Adhesive Products
3M™ Scotch-Weld™ Epoxy Adhesive DP125 Gray Duo-Pak, 1.7 fl oz, 12 per caseTwo-part epoxy adhesive with a 1:1 mix ratio, 25 minute worklife and exhibits very high peel strength. Cures at room temperature. Use to bond rubber, metal, wood, plastics, and masonry products.
3M™ Scotch-Weld™ EPX™ Mixing Nozzle 9742, 50 mL, 72 per case3M™ Scotch-Weld™ EPX™ Mixing Nozzle 9742 is for the 50 ml EPX applicator. The applicator is used to dispense 3M™ Scotch-Weld™ adhesives in duo-pak cartridges.
Product Catalog for 3M Mining Maintenance Solutions
Printer-friendly format Cleaning Products
[click to enlarge]
Use 5-Way Penetrant, Citrus Based Cleaner, High Performance Cloths and Silicone Lubricant to keep your operations clean and running efficiently.
Make a Selection
3M™ Citrus Base Cleaner, 6 oz, 24 per caseA liquid cleaner/degreaser that can be used to dissolve and remove dirt, grease, tar, and many non-curing type adhesives. It can also be used to degrease substrates for adhesive bonding in place of many chlorinated or petroleum-based solvents.
Scotch-Brite™ High Performance ClothDurable cleaning cloth, lifts and traps dust, grease, oils and fingerprints. Ideal for cleaning instrument gauges, safety glasses and helmet visors.
Product Catalog for 3M Mining Maintenance Solutions
Printer-friendly format Tape Products
[click to enlarge]
3M has a large product family of tapes including: Duct, Aluminum, Glass Cloth, Double Coated, Foam, Masking, Film, Sealing, Safety Stripe, Luminous, Vinyl and Electroplating Tapes.
Make a Selection
3M™ High Temperature Aluminum Foil/Glass Cloth Tape 363 Silver, 2 in x 36 yd 7.3 mil, 24 per case3M™ High Temperature Aluminum Foil/Glass Coth Tape 363 Silver, aluminum foil backing combined with a glass cloth and pressure sensitive silicone adhesive
3M™ Masking Tape 2307 Natural, 18 mm x 55 m, 48 per case BulkA general purpose masking tape for holding, bundling, sealing, paint masking and a vast number of other jobs where a paper masking tape is needed. Tape 2307 is typically used at room temperature but will function up to 200 degrees F ( 93 C ).
3M™ PTFE Glass Cloth Tape 5451 Brown, 2 in x 36 yd 5.3 mil, 6 per case Boxed3M™ PTFE Glass Cloth Tape 5451 Brown, premium performance, glass cloth tape impregnated with PTFE and silicone adhesive. Tape 5451 is a heat seal tape.
3M™ Super Bond Film Tape 396 Transparent, 2 in x 36 yd, 24 per case3M™ Super Bond Film Tape 396, Transparent, 4.1 mil (0.10mm), polyester film tape with a thick layer of rubber adhesive
3M™ UHMW Film Tape 5421 Transparent, 1 in x 18 yd 6.7 mil, 9 per case Boxed3M™ UHMW Polyethylene Tape 5421 Transparent, UHMW polyethylene film with rubber adhesive.
Acrylic Foam TapeHigh strength 3M™ VHB™ tapes are used throughout industry to replace mechanical fastening for permanent assembly in many applications.
Aluminum Foil TapeDead-soft aluminum foil tape. Applications include masking of sensitive components to protect from damage during paint stripping.
Double Coated TapeDouble coated tape that is high-tack, hand-tearable double coated film tape with a pressure sensitive adhesive on each side of the carrier.
Double Coated Urethane Foam TapeOff-white, open-cell urethane foam carrier. Features High shear adhesive with high temperature resistance.
http://products3.3m.com/catalog/ww/en001/mining/-/nod...w_globalmining_3_0/command_AbcPageHandler/output_html (1 of 2)22/11/2006 10:59:59 AM
Select a Location
English
By Keyword
3M Global Mining : Tape Products
Glass Cloth TapeGlass cloth tape with silicone adhesive. High temperature resistance, high adhesion, and a very strong, abrasion resistant backing.
High Performance Double Coated TapeFeatures a meduim-firm acrylic pressure adhesive system, for a combination of high grab and initial adhesion with excellent static shear holding power.
Safety Stripe TapeHighly conformable and resistant to most common solvents. Clear vinyl over colored stripes provides excellent abrasion resistance to the tape's stripped pattern. Ideal for calling speacial attention to overhead hazards, stairs, forklift traffic, and potentially dangerous pinch points on equipment.
http://products3.3m.com/catalog/ww/en001/mining/-/nod...w_globalmining_3_0/command_AbcPageHandler/output_html (2 of 2)22/11/2006 10:59:59 AM
3M Global Mining : Mining Specific
3M Worldwide : Global : Mining
Product Catalog for 3M Mining
Mining Specific
[click to enlarge]
3M Mining presents solutions specifically tailored to the needs of the mining and metals industry.
Make a Selection
BR (Belt Repair) Kit3M BR - Belt Repair Kit can be used to repair small nicks and cuts in many industrial belts.
Glass BubblesGlass bubbles incorporated into emulsion formulations as a sensitizing agent can improve blast efficiency and relizbility. A broad range of densities and strengths are available to match a wide range of slurry and emulsion requirements.
Glass bubbles incorporated into emulsion formulations as a sensitizing agent can improve blast efficiency and relizbility. A broad range of densities and strengths are available to match a wide range of slurry and emulsion requirements.
Make a Selection
K-SeriesThe general purpose K Series glass bubbles are the most economical 3M glass bubbles.
S-SeriesThe S Series glass bubbles have smaller particle sizes than the K Series.
http://products3.3m.com/catalog/ww/en001/mining/-/node_..._ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:00:18 AM
Select a Location
English
By Keyword
3M Global Mining : Site Safety
3M Worldwide : Global : Mining
Product Catalog for 3M Mining
Site Safety
[click to enlarge]
Site Safety covers a wide range 3M Products, covering Fire Protection, Sorbents, Tapes and Safety-Walk™ products.
Make a Selection
Fire Protection ProductsFire protection products help to prevent fire, smoke, toxic fumes and moisture from passing through penetrations in fire-rated walls and floors. These easy-to-install products are suitable for a wide variety of firestop applications, including plastic pipes, metal pipes, HVAC ductwork, cables, construction gaps, grease ducts, wall tops and control joints.
SorbentsSorbent products are available in many shapes and sizes to meet all spill response needs, and can be used in a wide variety of applications ranging from simple maintenance to emergency spills and cleanups.
Traffic Control ProductsThese products are for site traffic safety, control and guidance. From Clean-Walk™ mats to Safety-Walk™ this group of products ensures a safer working environment.
Fire protection products help to prevent fire, smoke, toxic fumes and moisture from passing through penetrations in fire-rated walls and floors. These easy-to-install products are suitable for a wide variety of firestop applications, including plastic pipes, metal pipes, HVAC ductwork, cables, construction gaps, grease ducts, wall tops and control joints.
Make a Selection
3M™ Fire Barrier FS-195+ Wrap/Strip - 2" X 24"One-part, intumescent elastomeric strip with foil on one side. Documented aging properties. Can be cut to fit irregular shapes. Up to 4 hours of Fire Protection.
3M™ Fire Barrier Mortar (44-Pound Bag)Lightweight cementitious firestop with excellent adhesion, bonds to concrete, metals, wood, plastic and cable jacketing. (44 Pound Bag)
3M™ Fire Barrier Plastic Pipe Device PPD6Used to firestop a 6" non-metallic pipe. One piece metal collar assembly encasing 3M's heat expanding FS-195+, used for new and retrofit installations to achieve up to 3 hour fire ratings.
3M™ Fire Barrier Restricting Collar RC-1 - 2"Works in conjunction with 3M FS-195+ wrap/strip or Ultra GS for firestopping penetrations in wall and floor ceiling assemblies.
Sorbent products are available in many shapes and sizes to meet all spill response needs, and can be used in a wide variety of applications ranging from simple maintenance to emergency spills and cleanups.
Make a Selection
3M™ Maintenance Sorbent Drum Cover M-DC22DD, High Capacity 25/CaseThe sorbent drum cover is designed to be used on a 55 gallon drum to catch drips and spills that occur during the dispensing of all types of non-aggressive liquids used in daily operations. Contains 25 covers per case and sorbs 12 gallons/case.
3M™ Maintenance Sorbent Folded M-FL550DD, High Capacity 3 Boxes/Case = 1 EachThis high capacity sorbent has a scrim on one side to increase strength and help eliminate linting. It is dispensed from a carrying/dispenser box in the form of a continuous roll with perforations every 16 inches.
3M™ Maintenance Sorbent Production Pad M-PD720GG, High Capacity 100 Pads/CaseUsed to clean up small spills and wipe down oily tools and equipment. Designed to be placed on machinery to catch leaks at the source. Each case sorbs 31.5 gallons and contains 100 pads (each 7.5 inches by 20.5 inches).
3M™ Maintenance Sorbent Roll M-RL38150DD, High Capacity 1 Roll/CaseDesigned to cover large surfaces and may be easily cut to fit tight corners. Can also be used to cover large spills or as a precaution in areas where large spills may occur. Each roll is 38 inches by 150 feet and sorbs 76 gallons.
3M™ Maintenance Sorbent Rug M-RGC36100E, with Coating 1 Rug/CaseThis rug is designed for use in industrial maintenance applications where foot and vehicle traffic is a concern, and will sorb most non-aggressive liquids . Each rug comes in a roll 36 inches by 100 feet and sorbs 10.5 gallons per roll.
These products are for site traffic safety, control and guidance. From Clean-Walk™ mats to Safety-Walk™ this group of products ensures a safer working environment.
Make a Selection
3M™ Clean-Walk Mat 5802, 24 in x 45 in, 30 per pad, 4 pads per case, RestrictedAn adhesive coated mat that is used in removing dirt from the bottom of shoes, wheels or any passing objects. To expose an adhesive surface, just peel the top sheet back.
3M™ Safety-Walk™ Conformable Tread 19280 Black, 2 in x 60 ft, 2 per caseIdeal for use on diamond grade safety plates., steps and other irregular surfaces. Mineral coated, slip-resistant with aluminum foil backing. Conforms to irregular surfaces and around edges.
Safety-Walk™ General Purpose TreadThis mineral-coated, slip-resistant material features a highly durable surface. Low-profile design reduces trip hazard.
Vinyl Lane Marking TapeVinyl film tape with a rubber adhesive, ideal for safety marking requirements. Available in a variety of sizes and colours.
http://products3.3m.com/catalog/ww/en001/mining/-/node_3...e_ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:00:49 AM
Select a Location
English
By Keyword
3M Global Mining : Worker Safety
3M Worldwide : Global : Mining
Product Catalog for 3M Mining
Worker Safety
[click to enlarge]
Let 3M Mining help you provide the products required for worker safety at mining and industrial sites.
Make a Selection
Eye ProtectionIncludes: Safety, protective and visitor eyewear.
Hearing Protection3M offers a wide variety of solutions to help reduce noise exposure. A full line of comfortable, easy-to-use hearing protectors, including ear plugs, ear muffs, and banded hearing protectors are available.
Respiratory3M Respirators are lightweight, comfortable and easy to breathe through. Using expertise in filtration technologies and blown microfiber capabilities, 3M offers a family of respirators that meet workers needs for comfort and value.
3M™ Protective Eyewear 1731, Blue Frame, Clear Lens 24/CaseStylish wrap around safety glasses. Comfortable fit with 4-position adjustable temple and vinyl nose pad. Shaped to fit facial contours.
3M™ Safety Goggles 1620/37102(AAD), Perforated 288/CaseMulti-purpose safety goggles with polycarbonate lens. Vinyl frames allow for excellent fit. Perforated for added ventilation and comfort. Do not use for protection against splash or dust hazards.
3M™ Visitor Specs 1611/37101(AAD), Clear 300/CaseAn economical alternative for short term eye protection. Can be worn alone or over prescription glasses. Polycarbonate Lens. Usually used by plant visitors.
3M offers a wide variety of solutions to help reduce noise exposure. A full line of comfortable, easy-to-use hearing protectors, including ear plugs, ear muffs, and banded hearing protectors are available.
Make a Selection
3M™ Damping Foil 2552 Silver, 2 in x 36 yd 10.0 mil, 5 per case Bulk3M™ Damping Foil 2552 Silver, aluminum foil constraining layer coated with a pressure-sensitive viscoelastic polymer on a poly-coated paper easy-release liner.
Ear MuffsEasy to use ear muffs are comfortable for extended wear in moderate to high noise situations.
Ear PlugsFoam, banded, reusable and corded ear plugs.
3M Respirators are lightweight, comfortable and easy to breathe through. Using expertise in filtration technologies and blown microfiber capabilities, 3M offers a family of respirators that meet workers needs for comfort and value.
Make a Selection
3M™ Vortex Cooling Assembly V-100/37018(AAD) 1/CaseThis assembly helps regulate the flow and temperature of the supplied air system. It helps keep the worker comfortable by cooling the air by up to 50°F (28°C). Includes the cooling tube, waist belt and holder.
http://products3.3m.com/catalog/ww/en001/mining/-/node_..._ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:01:17 AM
Select a Location
English
By Keyword
3M Global Mining : Electrical Solutions
3M Worldwide : Global : Mining
Product Catalog for 3M Mining
Electrical Solutions
[click to enlarge]
This section contains products for the following groups: Cable cleaning products, cable locators, splices, terminations, tapes, heat tracers, jacketing products and lubricants. 3M has the solution for all your electrical needs.
Make a Selection
Cable Cleaning System CC-SeriesThis cable cleaning system cleans cable insulation, metal, electrical, and mechanical parts. CC Series solvent is also suitable for use on transformers, generators, motors and metal parts of all sorts.
Electrical SplicesThe following splice solutions can help you reduce the time, labor and cost involved in a variety of electrical cable splicing applications. The product line covers splicing needs from 0-600V to 35kV applications.
Electrical Tape3M invented vinyl electrical tape and sets the industry standard for quality with a tape for nearly every electrical application. Such electrical tape applications include: marking, insulating, and splicing.
Electrical Terminations3M terminations offer easy installation and reliable performance when terminating shielded and non shielded, single and three-conductor, and indoor and outdoor medium voltage cables.
Infrared ThermometersInfrared thermometers are highly accurate and easy-to-use, portable non-contact (infrared) thermometer. It is an invaluable tool for monitoring operating termperatures of mechanical and electrical , plant and production equipment without removing the equipment from service.
Jacketing ProductsProtect and repair damaged electrical cable jacketing with heat shrink cable sleeves, jacket repair kits, and resins.
Lubricant ProductsWire pulling lubricants are designed for specific applications, so you can choose the right lubricant for the job at hand. You can count on 3M reliability through high pulling forces, extreme temperature changes, wet weather and the damaging effects of time.
Product Catalog for 3M Mining Electrical Solutions
Printer-friendly format Cable Cleaning System CC-Series
[click to enlarge]
This cable cleaning system cleans cable insulation, metal, electrical, and mechanical parts. CC Series solvent is also suitable for use on transformers, generators, motors and metal parts of all sorts.
Make a Selection
3M™ Cable Preparation Kit CC-2This cable cleaning system cleans cable insulation, metal, electrical, and mechanical parts. It has a case quantity of 10.
3M™ Cable Preparation Kit CC-3These specialized pads clean cable insulation, metal, electrical, and mechanical parts. It comes with three (3) CC-4 saturated pads per kit and has a case quantity of 10.
3M™ Cable Preparation Kit CC-4This cable cleaning solvent cleans cable insulation, metal, electrical, and mechanical parts. It has a case quantity of 4.
http://products3.3m.com/catalog/ww/en001/mining/-/node_..._ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:01:31 AM
Select a Location
English
By Keyword
3M Global Mining : Cable Cleaning System CC-Series
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Electrical Solutions
Cable Cleaning System CC-Series
[click to enlarge]
This cable cleaning system cleans cable insulation, metal, electrical, and mechanical parts. CC Series solvent is also suitable for use on transformers, generators, motors and metal parts of all sorts.
Make a Selection
3M™ Cable Preparation Kit CC-2This cable cleaning system cleans cable insulation, metal, electrical, and mechanical parts. It has a case quantity of 10.
3M™ Cable Preparation Kit CC-3These specialized pads clean cable insulation, metal, electrical, and mechanical parts. It comes with three (3) CC-4 saturated pads per kit and has a case quantity of 10.
3M™ Cable Preparation Kit CC-4This cable cleaning solvent cleans cable insulation, metal, electrical, and mechanical parts. It has a case quantity of 4.
Product Catalog for 3M Mining Electrical Solutions Cable Cleaning System CC-Series
Printer-friendly format 3M™ Cable Preparation Kit CC-3
[click to enlarge]
These specialized pads clean cable insulation, metal, electrical, and mechanical parts. It comes with three (3) CC-4 saturated pads per kit and has a case quantity of 10.
3M Id : 80-6105-9300-8GTIN(UPC/EAN) : 0 00 54007 49564 2
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
KIT IN A CAN CONTAINS CLEANING MATERIALS TO PREPARE A NORMAL SYNTHETIC CABLE FOR SPLICING OR TERMINATING. CC-3 CABLE CLEANING PAD
Product Catalog for 3M Mining Electrical Solutions
Printer-friendly format Electrical Splices
[click to enlarge]
The following splice solutions can help you reduce the time, labor and cost involved in a variety of electrical cable splicing applications. The product line covers splicing needs from 0-600V to 35kV applications.
Make a Selection
Cold Shrink Mine SpliceA complete kit designed for splicing type SHD-GC three-conductor shielded cables up to 15kV, on draglines, power shovels, drills, and type MPF underground power feeder cables and select trailing cables. Each kit contains: Cold Shrink insulation tubes; Scotchcast™ 2130 jacketing compound; cable cleaning and shielding materials. Order connectors separately.
Pigtail Motor Lead Splicing KitsDesigned to splice feeder and motor lead cables, each kit contains 3 splices. Splices can be re-entered, and pigtail may be re-used.
http://products3.3m.com/catalog/ww/en001/mining/-/node_6...e_ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:02:22 AM
Select a Location
English
By Keyword
3M Global Mining : Electrical Splices
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Electrical Solutions
Electrical Splices
[click to enlarge]
The following splice solutions can help you reduce the time, labor and cost involved in a variety of electrical cable splicing applications. The product line covers splicing needs from 0-600V to 35kV applications.
Make a Selection
Cold Shrink Mine SpliceA complete kit designed for splicing type SHD-GC three-conductor shielded cables up to 15kV, on draglines, power shovels, drills, and type MPF underground power feeder cables and select trailing cables. Each kit contains: Cold Shrink insulation tubes; Scotchcast™ 2130 jacketing compound; cable cleaning and shielding materials. Order connectors separately.
Pigtail Motor Lead Splicing KitsDesigned to splice feeder and motor lead cables, each kit contains 3 splices. Splices can be re-entered, and pigtail may be re-used.
Product Catalog for 3M Mining Electrical Solutions Electrical Splices
Printer-friendly format Cold Shrink Mine Splice
[click to enlarge]
A complete kit designed for splicing type SHD-GC three-conductor shielded cables up to 15kV, on draglines, power shovels, drills, and type MPF underground power feeder cables and select trailing cables. Each kit contains: Cold Shrink insulation tubes; Scotchcast™ 2130 jacketing compound; cable cleaning and shielding materials. Order connectors separately.
Product Catalog for 3M Mining Electrical Solutions Electrical Splices
Printer-friendly format Pigtail Motor Lead Splicing Kits
[click to enlarge]
Designed to splice feeder and motor lead cables, each kit contains 3 splices. Splices can be re-entered, and pigtail may be re-used.
Make a Selection
3M™ Motor Lead Pigtail Splice 5300Each kit makes three splices. Lugs not included in kits. Feeder of 14-10 AWG (2,5-4 sq mm), motor lead 16-12 AWG (1,5-2,5 sq mm).
3M™ Motor Lead Pigtail Splice 53015300 Series of kits are designed for splicing motor lead cables to incoming feeder cables
3M™ Motor Lead Pigtail Splice 5302Each kit makes three splices. Lugs not included in kits. Feeder of 2-1/0 AWG (35-50 sq mm), motor lead 4-1/0 AWG (25-50 sq mm).
3M™ Motor Lead Pigtail Splice Kit 5304Each kit makes three splices. Lugs not included in kits. Feeder of 250-500 kcmil (150-240 sq mm), motor lead 16-12 AWG (1,5-2,5 sq mm).
3M™ Motor Lead Splicing Kit 5322, 5KV & 8KV PigtailEach kit makes three splices. Lugs not included in kits. Feeder of 2-1/0 AWG (35-50 sq mm), motor lead 4-1/0 AWG (25-50 sq mm).
3M™ Motor Lead Splicing Kit 5324, 5KV & 8KV PigtailEach kit makes three splices. Lugs not included in kits. Feeder of 250-500 kcmil (150-240 sq mm), motor lead 4/0 AWG-500 kcmil (120-240 sq mm).
Product Catalog for 3M Mining Electrical Solutions
Printer-friendly format Electrical Tape
[click to enlarge]
3M invented vinyl electrical tape and sets the industry standard for quality with a tape for nearly every electrical application. Such electrical tape applications include: marking, insulating, and splicing.
Make a Selection
Scotch™ 23 Rubber Splicing TapeScotch® 23 Rubber Splicing Tape is used in primary electrical insulation for splicing all solid dielectric cables through 69 kV.
Super 88 Scotch™ Vinyl Electrical TapeThis black, 8.5 mil heavy duty, premium grade all-weather vinyl electrical insulating tape maintains conformability for cold weather applications.
http://products3.3m.com/catalog/ww/en001/mining/-/node_..._ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:03:04 AM
Select a Location
English
By Keyword
3M Global Mining : Electrical Tape
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Electrical Solutions
Electrical Tape
[click to enlarge]
3M invented vinyl electrical tape and sets the industry standard for quality with a tape for nearly every electrical application. Such electrical tape applications include: marking, insulating, and splicing.
Make a Selection
Scotch™ 23 Rubber Splicing TapeScotch® 23 Rubber Splicing Tape is used in primary electrical insulation for splicing all solid dielectric cables through 69 kV.
Super 88 Scotch™ Vinyl Electrical TapeThis black, 8.5 mil heavy duty, premium grade all-weather vinyl electrical insulating tape maintains conformability for cold weather applications.
Product Catalog for 3M Mining Electrical Solutions Electrical Tape
Printer-friendly format Scotch™ 23 Rubber Splicing Tape
[click to enlarge]
Scotch® 23 Rubber Splicing Tape is used in primary electrical insulation for splicing all solid dielectric cables through 69 kV.
Make a Selection
Scotch® Rubber Splicing Tape 23-1-1/2x30FT, 1 1/2 in x 30 ft (38 mm x 9,1 m), 50 per caseThis is a highly conformable, self-fusing Ethylene Propylene Rubber (EPR) based high-insulating voltage tape. Packed 1 roll per box with 10 per carton and 50 per case.
Scotch® Rubber Splicing Tape 23-3/4x30FT, 3/4 in x 30 ft (19 mm x 9,1 m), 50 per caseThis is a highly conformable, self-fusing Ethylene Propylene Rubber (EPR) based high-insulating voltage tape. Packed 1 roll per box with 50 per case.
Product Catalog for 3M Mining Electrical Solutions Electrical Tape
Printer-friendly format Super 88 Scotch™ Vinyl Electrical Tape
[click to enlarge]
This black, 8.5 mil heavy duty, premium grade all-weather vinyl electrical insulating tape maintains conformability for cold weather applications.
Make a Selection
Scotch® Premium Vinyl Electrical Tape 88-Super-2x36YD, 2 in x 36 yd (51mm x 32,9 m), 12 per caseThis black, 8.5 mil heavy duty, premium grade all-weather vinyl electrical insulating tape maintains conformability for cold weather applications. Inner pack of 1 per box, 12 per carton.
Scotch® Premium Vinyl Electrical Tape 88-Super-3/4x66FT, 3/4 in x 66 ft (19 mm x 20,1 m), 100 per caseOn a 1 inch core, this black, 8.5 mil heavy duty, premium grade all-weather vinyl electrical insulating tape maintains conformability for cold weather applications. Inner pack of 1 per canister, 10 per carton with 100 rolls per case.
Product Catalog for 3M Mining Electrical Solutions
Printer-friendly format Electrical Terminations
[click to enlarge]
3M terminations offer easy installation and reliable performance when terminating shielded and non shielded, single and three-conductor, and indoor and outdoor medium voltage cables.
Make a Selection
Cold Shrink QT-III Indoor TerminationEasy to install, silicone rubber termination, that requires no grease or silicone tape. Superior track and erosion resistance, with outstanding UV stability. Not heat, flames, or special tools required.
Cold Shrink QT-III Outdoor Skirted TerminationsCold Shrink QT-III Outdoor terminations offer easy installation and reliable performance when terminating outdoor medium voltage cable.
http://products3.3m.com/catalog/ww/en001/mining/-/node_..._ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:03:42 AM
Select a Location
English
By Keyword
3M Global Mining : Electrical Terminations
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Electrical Solutions
Electrical Terminations
[click to enlarge]
3M terminations offer easy installation and reliable performance when terminating shielded and non shielded, single and three-conductor, and indoor and outdoor medium voltage cables.
Make a Selection
Cold Shrink QT-III Indoor TerminationEasy to install, silicone rubber termination, that requires no grease or silicone tape. Superior track and erosion resistance, with outstanding UV stability. Not heat, flames, or special tools required.
Cold Shrink QT-III Outdoor Skirted TerminationsCold Shrink QT-III Outdoor terminations offer easy installation and reliable performance when terminating outdoor medium voltage cable.
Product Catalog for 3M Mining Electrical Solutions Electrical Terminations
Printer-friendly format Cold Shrink QT-III Indoor Termination
[click to enlarge]
Easy to install, silicone rubber termination, that requires no grease or silicone tape. Superior track and erosion resistance, with outstanding UV stability. Not heat, flames, or special tools required.
Make a Selection
3M™ Cold Shrink QT-III Termination Kit 7620-T-95, Non-Skirted, 0.32-0.59 in (8,2-15,0 mm) Cable Insulation O.D.This QT-III has a BIL rating of 95 kV and is suitable for use on 5 and 8.7 kV cables. 3 terminations per kit.
3M™ Cold Shrink QT-III Termination Kit 7621-T-95, Non-Skirted, 0.44-0.89 in (11,2-22,7mm) Cable Insulation O.D.This QT-III has a BIL rating of 95kV and is suitable for use on 5 and 8.7 kV cables. 3 terminations per kit.
3M™ Cold Shrink QT-III Termination Kit 7622-T-110, Non-Skirted, 0.64-1.08 in (16,3-27,4 mm) Cable Insulation O.D.This QT-III has a BIL rating of 110 kV and is suitable for use on 5, 8.7 and 15 kV cables. 3 terminations per kit.
3M™ Cold Shrink QT-III Termination Kit 7624-T-110, Non-Skirted, 0.83-1.53 in (21,1-38,9 mm) Cable Insulation O.D.This QT-III has a BIL rating of 110 kV and is suitable for use on 5, 8.7 and 15 kV cables. 3 terminations per kit.
3M™ Cold Shrink QT-III Termination Kit 7625-T-110, Non-Skirted, 1.05-1.80 in (26,7-45,7 mm) Cable Insulation O.D.This QT-III has a BIL rating of 110 kV and is suitable for use on 5, 8.7 and 15 kV cables. 3 terminations per kit.
3M™ Cold Shrink QT-III Termination Kit 7626-T-110, Non-Skirted, 1.53-2.32 in (38,9-58,9 mm) Cable Insulation O.D.This QT-III has a BIL rating of 110 kV and is suitable for use on 5, 8.7 and 15 kV cables. 3 terminations per kit.
Product Catalog for 3M Mining Electrical Solutions Electrical Terminations
Printer-friendly format Cold Shrink QT-III Outdoor Skirted Terminations
[click to enlarge]
Cold Shrink QT-III Outdoor terminations offer easy installation and reliable performance when terminating outdoor medium voltage cable.
Make a Selection
3M™ Cold Shrink QT-III Outdoor 2 Skirt Termination 7620-S-2, .32-.59 in (8,1-15,0 mm) Cable Insulation O.D.This QT-III has a BIL rating of 200 kV suitable for use on 5, 8.7, 15, 25/28, and 35 kV cables. 3 terminations per kit.
3M™ Cold Shrink QT-III Outdoor 2 Skirt Termination 7621-S-2, 0.44-0.89 in (11,2-22,7 mm) Cable Insulation O.D.This QT-III has a BIL rating of 95 kV and is suitable for use on 5 and 8.7 kV cables. 3 terminations per kit.
3M™ Cold Shrink QT-III Outdoor 2 Skirt Termination 7622-S-2, 0.64-1.08 in (16,3-27,4 mm) Cable Insulation O.D.This QT-III has a BIL rating of 110 kV suitable for use on 5, 8.7 and 15 kV cables. 3 terminations per kit.
3M™ Cold Shrink QT-III Outdoor 4 Skirt Termination 7692-S-4, 0.64-1.08 in (16,3-27,4 mm) Cable Insulation O.D.This QT-III has a BIL rating of 150 kV suitable for use on 5, 8.7, 15 and 25/28 kV cables. 3 terminations per kit.
3M™ Cold Shrink QT-III Outdoor 4 Skirt Termination 7693-S-4, 0.72-1.29 in (18,3-32,8 mm) Cable Insulation O.D.This QT-III has a BIL rating of 150 kV suitable for use on 5, 8.7, 15 and 25/28 kV cables. 3 terminations per kit.
3M™ Cold Shrink QT-III Outdoor 4 Skirt Termination 7694-S-4, 0.83-1.53 in (38,9-58,9 mm) Cable Insulation O.D.This QT-III has a BIL rating of 150 kV suitable for use on 5, 8.7, 15 and 25/28 kV cables. 3 terminations per kit.
3M™ Cold Shrink QT-III Outdoor 4 Skirt Termination 7696-S-4, 1.53-2.32 in (21,1-38,9 mm) Cable Insulation O.D.This QT-III has a BIL rating of 150 kV suitable for use on 5, 8.7, 15 and 25/28 kV cables. 3 terminations per kit..
http://products3.3m.com/catalog/ww/en001/mining/-/nod...w_globalmining_3_0/command_AbcPageHandler/output_html (1 of 2)22/11/2006 11:04:06 AM
Select a Location
English
By Keyword
3M Global Mining : Cold Shrink QT-III Outdoor Skirted Terminations
3M™ Cold Shrink QT-III Outdoor 8 Skirt Termination 7683-S-8, 0.72-1.29 in (18,3-32,8 mm) Cable Insulation O.D., 3 per kitThis QT-III has a BIL rating of 200 kV suitable for use on 5, 8.7, 15, 25/28, and 35 kV cables. 3 terminations per kit.
3M™ Cold Shrink QT-III Outdoor 8 Skirt Termination 7684-S-8, 0.83-1.53 in (38,9-58,9 mm) Cable Insulation O.D., 3 per kitThis QT-III has a BIL rating of 200 kV suitable for use on 5, 8.7, 15, 25/28, and 35 kV cables. 3 terminations per kit.
3M™ Cold Shrink QT-III Outdoor 8 Skirt Termination 7685-S-8, 1.05-1.80 in (26,7-45,7 mm) Cable Insulation O.D.This QT-III has a BIL rating of 200 kV suitable for use on 5, 8.7, 15, 25/28, and 35 kV cables. 3 terminations per kit.
3M™ Cold Shrink QT-III Outdoor 8 Skirt Termination 7686-S-8, 1.84-2.80 in (46,8-71,1 mm) Cable Insulation O.D.This QT-III has a BIL rating of 95 kV and is suitable for use on 5 and 8.7 kV cables. 3 terminations per kit.
Product Catalog for 3M Mining Electrical Solutions
Printer-friendly format Infrared Thermometers
[click to enlarge]
Infrared thermometers are highly accurate and easy-to-use, portable non-contact (infrared) thermometer. It is an invaluable tool for monitoring operating termperatures of mechanical and electrical , plant and production equipment without removing the equipment from service.
Make a Selection
3M™ Infrared Thermometer IR-60EXPL2-1, 110 V, Software, 1 per caseThe IR-60EXP2-1 features 17 point circle laser sighting, a 50:1 distance-to-spot ratio, adjustable emissivity, a temperature range of -25°F (-32°C) to 1600°F (870°C), a Hi-Lo alarm for scanning. It has a 110 volt power supply.
3M™ Infrared Thermometer IR-60L2, 1 per caseThe IR-60L2 features 17 point circle laser sighting, a 60:1 distance-to-spot ratio, adjustable emissivity, a temperature range of -25°F (-32°C) to 1600°F (870°C) and a Hi alarm for scanning.
http://products3.3m.com/catalog/ww/en001/mining/-/node_3...e_ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:04:13 AM
Select a Location
English
By Keyword
3M Global Mining : Infrared Thermometers
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Electrical Solutions
Infrared Thermometers
[click to enlarge]
Infrared thermometers are highly accurate and easy-to-use, portable non-contact (infrared) thermometer. It is an invaluable tool for monitoring operating termperatures of mechanical and electrical , plant and production equipment without removing the equipment from service.
Make a Selection
3M™ Infrared Thermometer IR-60EXPL2-1, 110 V, Software, 1 per caseThe IR-60EXP2-1 features 17 point circle laser sighting, a 50:1 distance-to-spot ratio, adjustable emissivity, a temperature range of -25°F (-32°C) to 1600°F (870°C), a Hi-Lo alarm for scanning. It has a 110 volt power supply.
3M™ Infrared Thermometer IR-60L2, 1 per caseThe IR-60L2 features 17 point circle laser sighting, a 60:1 distance-to-spot ratio, adjustable emissivity, a temperature range of -25°F (-32°C) to 1600°F (870°C) and a Hi alarm for scanning.
Product Catalog for 3M Mining Electrical Solutions Infrared Thermometers
Printer-friendly format 3M™ Infrared Thermometer IR-60EXPL2-1, 110 V, Software, 1 per case
[click to enlarge]
The IR-60EXP2-1 features 17 point circle laser sighting, a 50:1 distance-to-spot ratio, adjustable emissivity, a temperature range of -25°F (-32°C) to 1600°F (870°C), a Hi-Lo alarm for scanning. It has a 110 volt power supply.
3M Id : 80-6109-2822-0GTIN(UPC/EAN) : 0 00 54007 42852 7
Additional Information
Learn More . . .
Packaging Data
3M Infrared Thermometers - Brochure (PDF 672.4 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Additionally, it stores up to 100 data points allowing for easy set-up of preventative maintenance programs. For the ultimate in data logging, the IR-60EXP2-1, adds the versatility of direct computer connection for data downloads or printing. This unit can mount to a tripod, where temperature data can be measured over an extended period of time and output directly to a chart recorder, printer, or
Full Text . . .
Characteristics
Alarm Setting High and LowAverage Temperature Setting YesClass II Laser Sighting YesData Output NoData Storage YesDifferential Temperature Setting YesEmissivity Adjustable 0.10 to 1.00EU RoHS Compliant NoField of View 60:1Height 7.9 Inch LCD Backlight YesLength 6.7 Inch Locking Trigger YesMaximum Battery Life 25 Hour Maximum Battery Life with both Laser and Backlight On. 6 Hour
http://products3.3m.com/catalog/ww/en001/mining/-/nod...w_globalmining_3_0/command_AbcPageHandler/output_html (1 of 2)22/11/2006 11:04:26 AM
Select a Location
English
By Keyword
Email
3M Global Mining : 3M™ Infrared Thermometer IR-60EXPL2-1, 110 V, Software, 1 per case
Maximum Battery Life with Laser On 11 Hour Maximum Temperature Setting YesMinimum Temperature Setting YesPower Source 2 x 1.5V Alkaline Type AAPrimary Trademark Name 3MResponse Time 250 msec (95% response)Storage Temperature -25 to 122 Degree Fahrenheit Weight 1.375 Pound Width 2 Inch
Product Catalog for 3M Mining Electrical Solutions Infrared Thermometers
Printer-friendly format 3M™ Infrared Thermometer IR-60L2, 1 per case
[click to enlarge]
The IR-60L2 features 17 point circle laser sighting, a 60:1 distance-to-spot ratio, adjustable emissivity, a temperature range of -25°F (-32°C) to 1600°F (870°C) and a Hi alarm for scanning.
3M Id : 80-6109-2810-5GTIN(UPC/EAN) : 0 00 54007 42840 4
Additional Information
Learn More . . .
Packaging Data
3M Infrared Thermometers - Brochure (PDF 672.4 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
This unit can mount to a tripod and come standard with a hard plastic case and wrist strap.
Characteristics
Average Temperature Setting NoClass II Laser Sighting YesData Output NoData Storage NoEmissivity Adjustable 0.10 to 1.00EU RoHS Compliant NoField of View 60:1Height 7.9 Inch LCD Backlight YesLength 6.7 Inch Locking Trigger YesMaximum Battery Life 25 Hour Maximum Battery Life with both Laser and Backlight On. 6 Hour
Maximum Battery Life with Laser On 11 Hour Mounting Option Tripod Mount: 1/4 in - 20UNCPower Source 2 x 1.5V Alkaline Type AA
http://products3.3m.com/catalog/ww/en001/mining/-/nod...w_globalmining_3_0/command_AbcPageHandler/output_html (1 of 2)22/11/2006 11:04:34 AM
Select a Location
English
By Keyword
Email
3M Global Mining : 3M™ Infrared Thermometer IR-60L2, 1 per case
Primary Trademark Name 3MResponse Time 250 msec (95% response)Scan Size Indicator Laser YesWeight 1.375 Pound Width 2 Inch
Product Catalog for 3M Mining Electrical Solutions Infrared Thermometers
Printer-friendly format 3M™ IR-750C Heat Tracer Basic Model, Obsolete
[click to enlarge]
3M™ IR-750C Heat Tracer Basic Model
3M Id : 80-6109-8098-1GTIN(UPC/EAN) : 0 00 54007 43111 4
Additional Information
Learn More . . .
PackagingData
The 3M™ IR-750C Infrared Heat Tracer covers the basics of temperature measurement. It is lightweight and constructed of rugged plastic to withstand use in industrial environments. It has a temperature-measurement range of -25°F (-32°C) to 750°F (400°C), which encompasses the normal operation temperature of most industrial motors and equipment. The 3M™ IR-750C heat tracer is user friendly with a
Full Text . . .
Characteristics
Alarm Setting NoneAverage Temperature Setting NoData Output NoData Storage NoDifferential Temperature Setting No
Emissivity Pre-set at 0.95Field of View 8:1Height 7.7 Inch LCD Backlight YesLength 5.4 Inch Locking Trigger YesMaximum Battery Life 33 Hour Maximum Temperature Setting Yes
Power Source 9V Alkaline or NEDA No. 1604 battery
Response Time 500 msec (95% response)Spectral Response 7 to 18 Micrometre (Micron) Storage Temperature -13 to 158 Degree Fahrenheit Temperature Detection Range -25 to 750 Degree Fahrenheit Weight 9.5 Ounce
http://products3.3m.com/catalog/ww/en001/mining/-/nod...w_globalmining_3_0/command_AbcPageHandler/output_html (1 of 2)22/11/2006 11:04:41 AM
Product Catalog for 3M Mining Electrical Solutions Infrared Thermometers
Printer-friendly format 3M™ IR-750CEXL2 Heat Tracer Class II Laser extended performance, Obsolete3M™ IR-750CEXL2 Heat Tracer Class II Laser extended performance
3M Id : 80-6109-8100-5GTIN(UPC/EAN) : 0 00 54007 43113 8
Additional Information
Learn More . . .
PackagingData
The 3M™ IR-750CEXL2 Infrared Heat Tracer covers an increased temperature range of -25°F (-32°C) to 932°F (500°C), and displays the maximum, minimum, differential or average temperature while the trigger is pulled; a selectable high or low alarm, which is adjustable throughout the temperature range of the heat tracers; and adjustable emissivity. The 3M™ IR-750CEXL2 features built-in Class II laser
Full Text . . .
Characteristics
Alarm Setting High and LowAverage Temperature Setting YesClass II Laser Sighting YesData Output NoData Storage NoDifferential Temperature Setting YesEmissivity Adjustable 0.3 to 1.00Field of View 8:1Height 7.7 Inch LCD Backlight YesLength 5.4 Inch Locking Trigger YesMaximum Battery Life 33 Hour Maximum Battery Life with both Laser and Backlight On. 11 Hour
Maximum Battery Life with Laser On 11 Hour Maximum Temperature Setting YesMinimum Temperature Setting Yes
Power Source 9V Alkaline or NEDA No. 1604 battery
Primary Trademark Name 3MResponse Time 500 msec (95% response)Spectral Response 7 to 18 Micrometre (Micron) Storage Temperature -13 to 158 Degree Fahrenheit
http://products3.3m.com/catalog/ww/en001/mining/-/nod...w_globalmining_3_0/command_AbcPageHandler/output_html (1 of 2)22/11/2006 11:04:53 AM
Select a Location
English
By Keyword
3M Global Mining : 3M™ IR-750CEXL2 Heat Tracer Class II Laser extended performance, Obsolete
Product Catalog for 3M Mining Electrical Solutions
Printer-friendly format Jacketing Products
[click to enlarge]
Protect and repair damaged electrical cable jacketing with heat shrink cable sleeves, jacket repair kits, and resins.
Make a Selection
Heat Shrink Wraparound Cable Repair SleeveHDCW Heat Shrink Wraparound cable repair sleeves are designed to quickly repair damaged cable jacketing. They are also used to rejacket in-line splices. Each kit contains 1 adhesive heat-shrink wrap, and 1 stainless steel closure. Both items can be cut to the required length.
Scotchcast™ Resin Compound2130 is a flexible, permanent, flame retardant, urethane resin used for jacket repair or splicing portable cables.
Thick Wall Heat Shrink Cable SleevesHeat shrinkable cable sleeves provide reliable performance for electrical splices, connections and terminations, as well as mechanical and environmental protection. ITCSN heavy-wall cable sleeves are cross-linked polyolefin. They are highly split resistanct and fast shrinking to provide rapid installation. The cut-to-length sleeves come standard with a factory-applied adhesive/sealant.
Thin Wall Heat Shrink Cables Sleeves3M™ FP-301 Heat Shrink Tubing offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial applications. The tubing is typically used as a shrink-fit electrical insulation over cable splices and terminations. It is also used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering.
http://products3.3m.com/catalog/ww/en001/mining/-/node_..._ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:05:01 AM
Select a Location
English
By Keyword
3M Global Mining : Jacketing Products
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Electrical Solutions
Jacketing Products
[click to enlarge]
Protect and repair damaged electrical cable jacketing with heat shrink cable sleeves, jacket repair kits, and resins.
Make a Selection
Heat Shrink Wraparound Cable Repair SleeveHDCW Heat Shrink Wraparound cable repair sleeves are designed to quickly repair damaged cable jacketing. They are also used to rejacket in-line splices. Each kit contains 1 adhesive heat-shrink wrap, and 1 stainless steel closure. Both items can be cut to the required length.
Scotchcast™ Resin Compound2130 is a flexible, permanent, flame retardant, urethane resin used for jacket repair or splicing portable cables.
Thick Wall Heat Shrink Cable SleevesHeat shrinkable cable sleeves provide reliable performance for electrical splices, connections and terminations, as well as mechanical and environmental protection. ITCSN heavy-wall cable sleeves are cross-linked polyolefin. They are highly split resistanct and fast shrinking to provide rapid installation. The cut-to-length sleeves come standard with a factory-applied adhesive/sealant.
Thin Wall Heat Shrink Cables Sleeves3M™ FP-301 Heat Shrink Tubing offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial applications. The tubing is typically used as a shrink-fit electrical insulation over cable splices and terminations. It is also used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering.
Product Catalog for 3M Mining Electrical Solutions Jacketing Products
Printer-friendly format Heat Shrink Wraparound Cable Repair Sleeve
[click to enlarge]
HDCW Heat Shrink Wraparound cable repair sleeves are designed to quickly repair damaged cable jacketing. They are also used to rejacket in-line splices. Each kit contains 1 adhesive heat-shrink wrap, and 1 stainless steel closure. Both items can be cut to the required length.
Make a Selection
3M™ Heat Shrink Cable Repair Wrap Sleeve HDCW-35/10-1000This 39.4" (1000 mm) sleeve are designed to repair damaged cable jacketing with the Max/Min use range of 1.38"- 0.39" (35-10 mm), with sleeve dimensions for expanded diameter of 1.97" (50 mm) and recovered diameter of 0.32" (8 mm). 600/1000V Conductor Size of #8 AWG-2/0 MCM.
3M™ Heat Shrink Cable Repair Wrap Sleeve HDCW-80/25-1200This 47.2" (1200 mm) sleeve is designed to repair damaged cable jacketing with the Max/Min use range of 3.15"- 0.98" (80-25 mm), with sleeve dimensions for expanded diameter of 3.94" (100 mm) and recovered diameter of 0.91" (23 mm). 600/1000V Conductor Size of 500 AWG-1000 MCM.
3M™ Heat Shrink Cable Repair Wrap Sleeve HDCW-110/30-1200This 47.2" (1200 mm) sleeve is designed to repair damaged cable jacketing with the Max/Min use range of 4.33"- 1.18" (110-30 mm), with sleeve dimensions for expanded diameter of 5.20" (132 mm) and recovered diameter of 0.98" (25 mm). 600/1000V Conductor Size of 1000 AWG-2000 MCM.
3M™ Heat Shrink Cable Repair Wrap Sleeve HDCW-140/40-1200This 47.2" (1200 mm) sleeve is designed to repair damaged cable jacketing with the Max/Min use range of 5.39"- 1.38" (137-35 mm), with sleeve dimensions for expanded diameter of 5.71" (145 mm) and recovered diameter of 1.26" (32 mm).
Product Catalog for 3M Mining Electrical Solutions Jacketing Products
Printer-friendly format Scotchcast™ Resin Compound
[click to enlarge]
2130 is a flexible, permanent, flame retardant, urethane resin used for jacket repair or splicing portable cables.
Make a Selection
3M™ Scotchcast™ Flame Retardant Compound 2130B, 7.6 ozThis is a semi-flexible, permanent, urethane resin used for jacket repair or splicing portable cables.
Product Catalog for 3M Mining Electrical Solutions Jacketing Products
Printer-friendly format Thick Wall Heat Shrink Cable Sleeves
[click to enlarge]
Heat shrinkable cable sleeves provide reliable performance for electrical splices, connections and terminations, as well as mechanical and environmental protection. ITCSN heavy-wall cable sleeves are cross-linked polyolefin. They are highly split resistanct and fast shrinking to provide rapid installation. The cut-to-length sleeves come standard with a factory-applied adhesive/sealant.
Make a Selection
3M™ Heat Shrink Heavy-Wall Cable Sleeves for 1kV ITCSN-0800-48-Box, 8-1/0 AWG, Expanded/Recovered I.D. 0.80/0.20 in, 48 in Length, boxed3M™ Heat Shrinkable Cable Sleeves ITCSN provide reliable performance for electrical splices, connections and terminations, as well as mechanical and environmental protection. This cable sleeve comes in a length of 48 inch.
3M™ Heat Shrink Heavy-Wall Cable Sleeves for 1kV ITCSN-1500-48-Box, 3/0 AWG-400 kcmil, Expanded/Recovered I.D. 1.50/0.50 in, 48 in Length, boxed3M™ Heat Shrinkable Cable Sleeves ITCSN provide reliable performance for electrical splices, connections and terminations, as well as mechanical and environmental protection. This cable sleeve comes in a length of 48 inch.
Product Catalog for 3M Mining Electrical Solutions Jacketing Products
Printer-friendly format Thin Wall Heat Shrink Cables Sleeves
[click to enlarge]
3M™ FP-301 Heat Shrink Tubing offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial applications. The tubing is typically used as a shrink-fit electrical insulation over cable splices and terminations. It is also used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering.
Make a Selection
3M™ Heat Shrink Thin-Wall Tubing FP-301-1/16-Black-4'-Box, 1/16 in x 4 ft sticks, 25 per case3M™ Heat Shrink Tubing FP-301 offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications. This tubing comes in 48 inch sticks and in a case quantity of 25.
3M™ Heat Shrink Thin-Wall Tubing FP-301-3/16-Black-4'-Box, 3/16 in X 4 ft sticks, 25 per case3M™ Heat Shrink Tubing FP-301 offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications. This tubing comes in 48 inch sticks and in a case quantity of 25.
Product Catalog for 3M Mining Electrical Solutions
Printer-friendly format Lubricant Products
[click to enlarge]
Wire pulling lubricants are designed for specific applications, so you can choose the right lubricant for the job at hand. You can count on 3M reliability through high pulling forces, extreme temperature changes, wet weather and the damaging effects of time.
Make a Selection
Wire Pulling Lubricant Communication3M™ Wire Pulling Lubricant Communications is a slow drying, water-based liquid lubricant formulated for lightguide cable pulling.
Wire Pulling Lubricant GelThis is a water-soluble, translucent white gel that is easy to handle and apply to wire and cable without runs or drips.
Wire Pulling Lubricant Wax3M™ Wire Pulling Lubricant Wax can be used and stored in temperatures as high as 194°F (90°C), making it the choice for hot weather applications.
Wire Pulling Lubricant Wintergrade3M™ Wire Pulling Lubricant Wintergrade can be used and stored in temperatures as low as 10°F (-12°C), making it the choice for cold weather applications.
http://products3.3m.com/catalog/ww/en001/mining/-/node_5...e_ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:05:58 AM
Select a Location
English
By Keyword
3M Global Mining : Lubricant Products
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Electrical Solutions
Lubricant Products
[click to enlarge]
Wire pulling lubricants are designed for specific applications, so you can choose the right lubricant for the job at hand. You can count on 3M reliability through high pulling forces, extreme temperature changes, wet weather and the damaging effects of time.
Make a Selection
Wire Pulling Lubricant Communication3M™ Wire Pulling Lubricant Communications is a slow drying, water-based liquid lubricant formulated for lightguide cable pulling.
Wire Pulling Lubricant GelThis is a water-soluble, translucent white gel that is easy to handle and apply to wire and cable without runs or drips.
Wire Pulling Lubricant Wax3M™ Wire Pulling Lubricant Wax can be used and stored in temperatures as high as 194°F (90°C), making it the choice for hot weather applications.
Wire Pulling Lubricant Wintergrade3M™ Wire Pulling Lubricant Wintergrade can be used and stored in temperatures as low as 10°F (-12°C), making it the choice for cold weather applications.
Product Catalog for 3M Mining Electrical Solutions Lubricant Products
Printer-friendly format Wire Pulling Lubricant Communication
[click to enlarge]
3M™ Wire Pulling Lubricant Communications is a slow drying, water-based liquid lubricant formulated for lightguide cable pulling.
Make a Selection
3M™ Wire Pulling Lubricant Communication WLC-5, Five Gallons3M™ Wire Pulling Lubricant Communications is a slow drying, water-based liquid lubricant formulated for lightguide cable pulling. Case is 1 container weighing 42 lbs total.
3M™ Wire Pulling Lubricant Communication WLC-QT, One Quart3M™ Wire Pulling Lubricant Communications is a slow drying, water-based liquid lubricant formulated for lightguide cable pulling. Case is 12 containers weighing 28 lbs total.
Product Catalog for 3M Mining Electrical Solutions Lubricant Products
Printer-friendly format Wire Pulling Lubricant Gel
[click to enlarge]
This is a water-soluble, translucent white gel that is easy to handle and apply to wire and cable without runs or drips.
Make a Selection
3M™ Wire Pulling Lubricant Gel WL-1, One GallonThis is a water-soluble, translucent white gel that is easy to handle and apply to wire and cable without runs or drips. The lubricant produces a low coefficient of friction that lessens the chance of wire damage from high pulling forces. 4 per case
3M™ Wire Pulling Lubricant Gel WL-5, Five GallonsThis is a water-soluble, translucent white gel that is easy to handle and apply to wire and cable without runs or drips. The lubricant produces a low coefficient of friction that lessens the chance of wire damage from high pulling forces. Case is 1 container weighing 42 lbs.
3M™ Wire Pulling Lubricant Gel WL-QT, One QuartThis is a water-soluble, translucent white gel that is easy to handle and apply to wire and cable without runs or drips. The lubricant produces a low coefficient of friction that lessens the chance of wire damage from high pulling forces. Case is 12 containers weighing 28 lbs total.
Product Catalog for 3M Mining Electrical Solutions Lubricant Products
Printer-friendly format Wire Pulling Lubricant Wax
[click to enlarge]
3M™ Wire Pulling Lubricant Wax can be used and stored in temperatures as high as 194°F (90°C), making it the choice for hot weather applications.
Make a Selection
3M™ Wire Pulling Lubricant Wax 'WLX-5, Five Gallons3M™ Wire Pulling Lubricant Wax can be used and stored in temperatures as high as 194°F (90°C), making it the choice for hot weather applications. Case is 1 container weighing 42 lbs total.
3M™ Wire Pulling Lubricant Wax WLX-1, One Gallon3M™ Wire Pulling Lubricant Wax can be used and stored in temperatures as high as 194°F (90°C), making it the choice for hot weather applications. Case is 4 containers weighing 35 lbs total.
3M™ Wire Pulling Lubricant Wax WLX-QT, One Quart3M™ Wire Pulling Lubricant Wax can be used and stored in temperatures as high as 194°F (90°C), making it the choice for hot weather applications. Case is 12 containers weighing 28 lbs total.
Product Catalog for 3M Mining Electrical Solutions Lubricant Products
Printer-friendly format Wire Pulling Lubricant Wintergrade
[click to enlarge]
3M™ Wire Pulling Lubricant Wintergrade can be used and stored in temperatures as low as 10°F (-12°C), making it the choice for cold weather applications.
Make a Selection
3M™ Wire Pulling Lubricant Wintergrade WLW-1, One Gallon3M™ Wire Pulling Lubricant Wintergrade can be used and stored in temperatures as low as 10°F (-12°C), making it the choice for cold weather applications. Case is 4 containers weighing 7.4 lbs total.
3M™ Wire Pulling Lubricant Wintergrade WLW-5, 5 Gallons3M™ Wire Pulling Lubricant Wintergrade can be used and stored in temperatures as low as 10°F (-12°C), making it the choice for cold weather applications. Case is 1 container weighing 42 lbs.
3M™ Wire Pulling Lubricant Wintergrade WLW-QT, One Quart3M™ Wire Pulling Lubricant Wintergrade can be used and stored in temperatures as low as 10°F (-12°C), making it the choice for cold weather applications. Case is 12 containers weighing 28 lbs total.
http://products3.3m.com/catalog/ww/en001/mining/-/node_..._ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:06:34 AM
Select a Location
English
By Keyword
3M Global Mining : Abrasive Products
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions
Abrasive Products
[click to enlarge]
3M carries a number of premium engineered abrasives and convenient all-purpose abrasive products for all mining and industrial applications.
Make a Selection
3M Scotch-Brite Disc CS-RD 115 mm x 22 mm3M Scotch-Brite Disc CS-RD 115 mm x 22 mm
3M™ Belt Pack 518S, 1/2 in x 18 in, 5 per caseConvenient introductory pack of Scotch-Brite™ surface conditioning and 3M™ coated abrasive belts.
3M™ Cloth Belt 761D, 3 in x 24 in P120 Y weight Filmlok, 5 per inner 25 per caseA Cubitron™ abrasive grain cloth belt constructed on a Y weight, strong, durable cloth backing. Resin bonded for heat resistance. Grade: P120. Primary markets: metalworking, woodworking.
3M™ Cloth Sheet 011K, 9 in x 11 in Fine, 50 per inner 250 per caseSheet constructed on a J weight, light and flexible cloth backing. Grade: FINE. Primary markets: metalworking, woodworking.
3M™ Mini Mandrel 935, 2 7/8 in x 1/4 in, 5 per caseUse with 1 inch wide x 1 1/2 inch long sheets of Scotch-Brite™ material to fit into tight area.
3M™ Roloc™ Disc Pack 983S, 3 in, 5 packs per caseConvenient introductory pack includes 3 inch diameter Roloc™ surface conditioning discs, 3M coated abrasive discs and Roloc disc pad. An easy way to evaluate the right product, size and grade for your application.
3M™ Twist-Lok™ Pad Holder 961, 10/caseSpecially designed for use with 3M hand pads to make clean up jobs faster, easier, and safer. Distributes pressure evenly over pad surface for efficient cleaning action and improved pad life.
Abrasive Flap Disc 747DA Cubitron™ abrasive grain abrasive flap disc constructed on a X weight, durable cloth backing. Resin bonded for heat resistance.
Fiber DiscsGeneral purpose discs for a variety of grinding and removal jobs.
Green Corps™ WheelsWheel is designed to provide high cut rates and long life on most all materials including fiberglass, stainless steel, mild steel and aerospace alloys. Ideal for use on a wide variety of utility type cut-off tools.
http://products3.3m.com/catalog/ww/en001/mining/-/nod..._globalmining_3_0/command_AbcPageHandler/output_print (1 of 2)22/11/2006 11:06:41 AM
Select a Location
English
3M Global Mining : Abrasive Products
Radial Bristle DiscsDurable radial plastic disc for thin coating removal.
Scotch-Brite EXL Deburring WheelHigh performance and durability for deburring and finishing applications.
Scotch-Brite Multi-Flex Abrasive Sheet RollsUltra flexible and conformable for cleaning or fine finishing.
Scotch-Brite™ and Roloc™ Bristle DiscsBristle technology provides a uniform concentration of mineral throughout the flexible abrasive filled bristles.
Scotch-Brite™ Clean and Strip Disc, 6 in x 1/2 in S XCS, 15 per caseAggressive, open-web disc for cleaning welds, removing rust and paint. May be mounted on a straight shaft tool or bench motor. Abrasive mineral: Extra coarse grade silicon carbide. Color: Black MOS: 4000 RPM
Scotch-Brite™ Coating Removal Disc, 4 1/2 in x NH S XCS Bulk, 40 per caseHeavy duty, semi-open web used to clean rust and paint. Contains a backing that mounts to hook and loop pads. Abrasive mineral: Extra Coarse grade silicon carbide. Color: Black MOS: 12000 RPM
Scotch-Brite™ Roloc™ TR Surface Conditioning DiscsA non-woven abrasive product used for cleaning, finishing, blending and deburring applications.
Scotch-Brite™ Surface Conditioning DiscsA non-woven abrasive product used for cleaning, finishing, blending and deburring applications. Contains a backing that mounts to hook and loop pads.
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products
Printer-friendly format 3M™ Cloth Belt 761D, 3 in x 24 in P120 Y weight Filmlok, 5 per inner 25 per case
[click to enlarge]
A Cubitron™ abrasive grain cloth belt constructed on a Y weight, strong, durable cloth backing. Resin bonded for heat resistance. Grade: P120. Primary markets: metalworking, woodworking.
3M Id : 60-4200-0883-5GTIN(UPC/EAN) : 0 00 51144 81414 5
Additional Information
Learn More . . .
PackagingData
For tough portable belt sanding jobs; features long-lasting, durable 3M™ Cubitron™ abrasive grain on a strong Y-weight backing. The closed coat feature provides a better finish and less aggressive cut than a comparable open coat abrasives of the same grade. The purple* color indicates it's leading edge technology designed to provide the lowest possible manufacturing costs. *The purple color
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products
Printer-friendly format 3M™ Roloc™ Disc Pack 983S, 3 in, 5 packs per case
[click to enlarge]
Convenient introductory pack includes 3 inch diameter Roloc™ surface conditioning discs, 3M coated abrasive discs and Roloc disc pad. An easy way to evaluate the right product, size and grade for your application.
3M Id : 60-9800-1882-8GTIN(UPC/EAN) : 0 00 51144 82900 2
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products
Printer-friendly format 3M™ Twist-Lok™ Pad Holder 961, 10/case
[click to enlarge]
Specially designed for use with 3M hand pads to make clean up jobs faster, easier, and safer. Distributes pressure evenly over pad surface for efficient cleaning action and improved pad life.
3M Id : 61-5000-4615-8GTIN(UPC/EAN) : 5 00 48011 09493 4
Additional Information
Learn More . . .
PackagingData
Characteristics
Color GrayHandle Color GrayHandle Material PlasticHeight 2.5 Inch Length 4.75 Inch Material PlasticPrimary Trademark Name 3M
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products
Printer-friendly format Abrasive Flap Disc 747D
[click to enlarge]
A Cubitron™ abrasive grain abrasive flap disc constructed on a X weight, durable cloth backing. Resin bonded for heat resistance.
Make a Selection
3M™ Abrasive Flap Disc 747D, 4 1/2 in x 7/8 in 36 X weight, 10 per caseA Cubitron™ abrasive grain abrasive flap disc constructed on a X weight, durable cloth backing. Resin bonded for heat resistance. Features grinding aid for cooler grinding. Grade: 36. Primary market: metalworking.
3M™ Abrasive Flap Disc 747D, 4 1/2 in x 7/8 in 50 X weight, 10 per caseA Cubitron™ abrasive grain abrasive flap disc constructed on a X weight, durable cloth backing. Resin bonded for heat resistance. Features grinding aid for cooler grinding. Grade: 50. Primary market: metalworking.
3M™ Abrasive Flap Disc 747D, 4 1/2 in x 7/8 in 60 X weight, 10 per caseA Cubitron™ abrasive grain abrasive flap disc constructed on a X weight, durable cloth backing. Resin bonded for heat resistance. Features grinding aid for cooler grinding. Grade: 60. Primary market: metalworking.
3M™ Abrasive Flap Disc 747D, 7 in x 7/8 in 36 X weight, 5 per caseThe new standard for offhand grinding and finishing of metals. Angled for better surface coverage. Provides a consistent rate of cut for a superior finish and it provides long-life performance that improves quality and lowers cost. MOS: 8600
3M™ Abrasive Flap Disc 747D, 7 in x 7/8 in 50 X weight, 5 per caseThe new standard for off hand grinding and finishing of metals. Angled for better surface coverage. Provides a consistent rate of cut for a superior finish and it provides long-life performance that improves quality and lowers cost.
3M™ Abrasive Flap Disc 747D, 7 in x 7/8 in 80 X weight, 5 per caseThe new standard for off hand grinding and finishing of metals. Angled for better surface coverage. Provides a consistent rate of cut for a superior finish and it provides long-life performance that improves quality and lowers cost.
3M™ Abrasive Flap Disc 747D, 7 in x 7/8 in P120 X weight, 5 per caseThe new standard for off hand grinding and finishing of metals. Angled for better surface coverage. Provides a consistent rate of cut for a superior finish and it provides long-life performance that improves quality and lowers cost.
http://products3.3m.com/catalog/ww/en001/mining/-/nod...w_globalmining_3_0/command_AbcPageHandler/output_html (1 of 2)22/11/2006 11:07:45 AM
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products
Printer-friendly format Fiber Discs
[click to enlarge]
General purpose discs for a variety of grinding and removal jobs.
Make a Selection
3M™ Fibre Disc 381C, 7 in x 7/8 in 60, 25 per inner, 100 per case, ObsoleteAn aluminum oxide disc constructed on a fibre backing. Grade: 60. Primary market: metalworking.
3M™ Fibre Type C Disc 281C, 4 in x 5/8 in Die# 400FF 80, 25 per case BoxedAn aluminum oxide disc constructed on a fibre backing. Grade: 80. Primary market: metalworking.
3M™ Fibre Type C Disc 281C, 5 in x 7/8 in Die# 500P 100, 25 per case Boxed, ObsoleteAn aluminum oxide disc constructed on a fibre backing. Grade: 100. Primary market: metalworking.
3M™ Fibre Type C Disc 281C, 7 in x 7/8 in Die# 700BB 24, 25 per case Boxed, ObsoleteAn aluminum oxide disc constructed on a fibre backing. Grade: 24. Primary market: metalworking.
3M™ Fibre Type C Disc 281C, 7 in x 7/8 in Die# 700BB 36, 25 per case Boxed, ObsoleteAn aluminum oxide disc constructed on a fibre backing. Grade: 36. Primary market: metalworking.
3M™ Fibre Type C Disc 281C, 7 in x 7/8 in Die# 700BB 50, 25 per case Boxed, ObsoleteAn aluminum oxide disc constructed on a fibre backing. Grade: 50. Primary market: metalworking.
3M™ Fibre Type C Disc 281C, 7 in x 7/8 in Die# 700BB 60, 25 per case Boxed, ObsoleteAn aluminum oxide disc constructed on a fibre backing. Grade: 60. Primary market: metalworking.
3M™ Fibre Type C Disc 281C, 7 in x 7/8 in Die# 700BB 80, 25 per case Boxed, ObsoleteAn aluminum oxide disc constructed on a fibre backing. Grade: 80. Primary market: metalworking.
3M™ Fibre Type C Disc 281C, 7 in x 7/8 in Die# 700BB 100, 25 per case Boxed, ObsoleteAn aluminum oxide disc constructed on a fibre backing. Grade: 100. Primary market: metalworking.
http://products3.3m.com/catalog/ww/en001/mining/-/nod...w_globalmining_3_0/command_AbcPageHandler/output_html (1 of 2)22/11/2006 11:07:59 AM
Select a Location
English
By Keyword
3M Global Mining : Fiber Discs
3M™ Fibre Type C Disc 281C, 7 in x 7/8 in Die# 700BB 120, 25 per case Boxed, ObsoleteAn aluminum oxide disc constructed on a fibre backing. Grade: 120. Primary market: metalworking.
3M™ Fibre Type C Type XY Disc 381C, 7 in x 7/8 in Die# 700BB 24, 100 per case Boxed, ObsoleteAn aluminum oxide disc constructed on a fibre backing. Grade: 24. Primary market: metalworking.
3M™ Fibre Type C Type XY Disc 381C, 7 in x 7/8 in Die# 700BB 36, 100 per case Boxed, ObsoleteAn aluminum oxide disc constructed on a fibre backing. Grade: 36. Primary market: metalworking.
3M™ Fibre Type C Type XY Disc 381C, 7 in x 7/8 in Die# 700BB 80, 25 per inner 100 per case Boxed, ObsoleteAn aluminum oxide disc constructed on a fibre backing. Grade: 80. Primary market: metalworking.
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products
Printer-friendly format Green Corps™ Wheels
[click to
enlarge]
Wheel is designed to provide high cut rates and long life on most all materials including fiberglass, stainless steel, mild steel and aerospace alloys. Ideal for use on a wide variety of utility type cut-off tools.
Make a Selection
3M™ Green Corps™ Cut-Off Wheel, 01989, 3 in x 1/32 in x 3/8 in, 5 wheels per pack 10 packs per case3Ms highest performing, longest lasting wheel used for cutting sheet metal, frame rails, clamps and rusted bolts. Constructed with premium grade abrasives, these wheels out-cut and out-last General Purpose wheels.
3M™ Green Corps™ Cut-Off Wheel, 01990, 3 in x 1/16 in x 3/8 in, 5 wheels per pack 10 packs per case3Ms highest performing, longest lasting wheel used for cutting sheet metal, frame rails, clamps and rusted bolts. Constructed with premium grade abrasives, these wheels out-cut and out-last General Purpose wheels.
3M™ Green Corps™ Reinforced Weld Grinding Wheel, 01991, 3 in x 3/16 in x 3/8 in, 5 wheels per pack 10 packs per caseIdeal for cutting spot welds and grinding hard-to-reach places. Best in class construction. DO NOT USE ON TOOL WITHOUT GUARDS.
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products
Printer-friendly format Radial Bristle Discs
[click to
enlarge]
Durable radial plastic disc for thin coating removal.
Make a Selection
Scotch-Brite™ Radial Bristle Disc, 3 in x 3/8 in 50, 40 per caseDurable radial plastic disc for deburring or coating removal. Leaves a coarse satin finish. Gang multiple discs to form a brush. Fits portable hand tool or small bench motor. Abrasive mineral: 50 grade Cubitron™ grain. Color: Green MOS: 25000 RPM
Scotch-Brite™ Radial Bristle Disc, 3 in x 3/8 in 80, 40 per caseDurable radial plastic disc for deburring or coating removal. Leaves a satin finish. Gang multiple discs to form a brush. Fits portable hand tool or small bench motor. Abrasive mineral: 80 grade Cubitron™ grain. Color: Yellow MOS: 25000 RPM
Scotch-Brite™ Radial Bristle Disc, 3 in x 3/8 in 120, 10 per inner 40 per caseDurable radial plastic disc for thin coating removal. Leaves a fine satin finish. Gang multiple discs to form a brush. Fits portable hand tool or small bench motor. Abrasive mineral: 120 grade Cubitron™ grain. Color: White MOS: 25000 RPM
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products
Printer-friendly format Scotch-Brite EXL Deburring Wheel
[click to enlarge]
High performance and durability for deburring and finishing applications.
Make a Selection
Scotch-Brite™ EXL Deburring Wheel, 6 in x 1 in x 1 in 8A MED, 3 per caseHigh performance and durability for deburring and finishing applications. Convolutely wound on a core. Hard, long lasting 8 density. Abrasive mineral: Medium grade aluminum oxide. Color: Gray MOS: 6000 RPM
Scotch-Brite™ EXL Deburring Wheel, 6 in x 1 in x 1 in 9S FIN, 3 per caseHigh performance and durability for deburring and finishing applications. Convolutely wound on a core. Hard, durable 9 density. Abrasive mineral: Fine grade silicon carbide. Color: Gray MOS: 6000 RPM
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products
Printer-friendly format Scotch-Brite Multi-Flex Abrasive Sheet Rolls
[click to enlarge]
Ultra flexible and conformable for cleaning or fine finishing.
Make a Selection
Scotch-Brite™ Multi-Flex Abrasive Sheet Roll, 8 in x 20 ft A VFN, 60 per roll, 4 rolls per caseUltra flexible and conformable for cleaning or fine finishing. Convenient dispenser saves time and eliminates waste. Replaces steel wool to eliminate contamination. Abrasive mineral: Very fine grade aluminum oxide. Color: Maroon
Scotch-Brite™ Multi-Flex Abrasive Sheet Roll, 8 in x 20 ft S ULF, 60 per roll 4 rolls per caseUltra flexible and conformable for cleaning or fine finishing. Convenient dispenser saves time and eliminates waste. Replaces steel wool to eliminate contamination. Abrasive mineral: Ultra fine grade silcon carbide. Color: Gray
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products
Printer-friendly format Scotch-Brite™ and Roloc™ Bristle Discs
[click to enlarge]
Bristle technology provides a uniform concentration of mineral throughout the flexible abrasive filled bristles.
Make a Selection
Scotch-Brite™ Bristle Disc, 4 1/2 in 50, 10 per caseBrush-like bristle disc removes coarse coatings from the large, open areas of a work-piece. Works on right angle tools quickly and easily with little or no pressure.
Scotch-Brite™ Bristle Disc, 4 1/2 in 120, 10 per caseBrush-like bristle disc removes coarse coatings from the large, open areas of a work-piece. Works on right angle tools quickly and easily with little or no pressure.
Scotch-Brite™ Roloc™ Bristle Disc, 2 in x 5/8 Tapered 50, 40 per caseDisc is a molded, abrasive filled bristle disc instead of wire brushes for automotive use on aluminum and metal. Use for deburring, blending, finishing, polishing, cleaning and for coating, defect, scratch and rust removal.
Scotch-Brite™ Roloc™ Bristle Disc, 2 in x 5/8 Tapered 120, 40 per caseDisc is a molded, abrasive filled bristle disc instead of wire brushes for automotive use on aluminum and metal. Use for deburring, blending, finishing, polishing, cleaning and for coating, defect, scratch and rust removal.
Scotch-Brite™ Roloc™ Bristle Disc, 3 in x 5/8 Tapered 50, 40 per caseDisc is a molded, abrasive filled bristle disc instead of wire brushes for automotive use on aluminum and metal. Use for deburring, blending, finishing, polishing, cleaning and for coating, defect, scratch and rust removal.
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products
Printer-friendly format Scotch-Brite™ Clean and Strip Disc, 6 in x 1/2 in S XCS, 15 per case
[click to enlarge]
Aggressive, open-web disc for cleaning welds, removing rust and paint. May be mounted on a straight shaft tool or bench motor. Abrasive mineral: Extra coarse grade silicon carbide. Color: Black MOS: 4000 RPM
3M Id : 61-5001-2072-2GTIN(UPC/EAN) : 0 00 48011 00948 3
Additional Information
Learn More . . .
PackagingData
Stripping paint from metal surfaces ,inspecting welds,removing coatings and preparing surface for recoating
Characteristics
Abrasive Mineral Type Silicon CarbideColor BlackPrimary Trademark Name Scotch-Brite
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products
Printer-friendly format Scotch-Brite™ Coating Removal Disc, 4 1/2 in x NH S XCS Bulk, 40 per case
[click to enlarge]
Heavy duty, semi-open web used to clean rust and paint. Contains a backing that mounts to hook and loop pads. Abrasive mineral: Extra Coarse grade silicon carbide. Color: Black MOS: 12000 RPM
3M Id : 61-5001-2342-9GTIN(UPC/EAN) : 0 00 48011 18482 1
Additional Information
Learn More . . .
PackagingData
Characteristics
Abrasive Mineral Type Silicon CarbidePrimary Trademark Name Scotch-Brite
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products
Printer-friendly format Scotch-Brite™ Roloc™ TR Surface Conditioning Discs
[click to enlarge]
A non-woven abrasive product used for cleaning, finishing, blending and deburring applications.
Make a Selection
Scotch-Brite™ Roloc™ Surface Conditioning Disc TR, 2 in x NH A CRS, 50 per inner 200 per caseA non-woven abrasive product used for cleaning, finishing, blending and deburring applications. A threaded attachment system secures the disc to the holder. Abrasive mineral: Coarse grade aluminum oxide. Color: Brown MOS: 25000 RPM
Scotch-Brite™ Roloc™ Surface Conditioning Disc TR, 2 in x NH A MED, 50 per inner 200 per caseA non-woven abrasive product used for cleaning, finishing, blending and deburring applications. A threaded attachment system secures the disc to the holder. Abrasive mineral: Medium grade aluminum oxide. Color: Maroon MOS: 25000 RPM
Scotch-Brite™ Roloc™ Surface Conditioning Disc TR, 2 in x NH A VFN, 50 per inner 200 per caseA non-woven abrasive product used for cleaning, finishing, blending and deburring applications. A threaded attachment system secures the disc to the holder. Abrasive mineral: Very fine grade aluminum oxide. Color: Blue MOS: 25000 RPM
Scotch-Brite™ Roloc™ Surface Conditioning Disc TR, 3 in x NH A CRS, 25 per inner 100 per caseA non-woven abrasive product used for cleaning, finishing, blending and deburring applications. A threaded attachment system secures the disc to the holder. Abrasive mineral: Coarse grade aluminum oxide. Color: Brown MOS: 18000 RPM
Scotch-Brite™ Roloc™ Surface Conditioning Disc TR, 3 in x NH A MED, 25 per inner 100 per caseA non-woven abrasive product used for cleaning, finishing, blending and deburring applications. A threaded attachment system secures the disc to the holder. Abrasive mineral: Medium grade aluminum oxide. Color: Maroon MOS: 18000 RPM
Scotch-Brite™ Roloc™ Surface Conditioning Disc TR, 3 in x NH A VFN, 25 per inner 100 per caseA non-woven abrasive product used for cleaning, finishing, blending and deburring applications. A threaded attachment system secures the disc to the holder. Abrasive mineral: Very fine grade aluminum oxide. Color: Blue MOS: 18000 RPM
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products
Printer-friendly format Scotch-Brite™ Surface Conditioning Discs
[click to enlarge]
A non-woven abrasive product used for cleaning, finishing, blending and deburring applications. Contains a backing that mounts to hook and loop pads.
Make a Selection
Scotch-Brite™ Surface Conditioning Disc Pack 917S, 7 in, 1 per inner 5 per caseIntroductory pack containing a variety of grades of 7 inch non-woven surface conditioning discs. Used for cleaning, finishing, blending and deburring applications. Also includes 917 disc pad holder. MOS: 6000 RPM
Scotch-Brite™ Surface Conditioning Disc, 2 in x NH A CRS, 200 per caseA non-woven abrasive product used for cleaning, finishing, blending and deburring applications. Contains a backing that mounts to hook and loop pads. Abrasive mineral: Coarse grade aluminum oxide. Color: Brown MOS: 23000 RPM
Scotch-Brite™ Surface Conditioning Disc, 2 in x NH A VFN, 200 per caseA non-woven abrasive product used for cleaning, finishing, blending and deburring applications. Contains a backing that mounts to hook and loop pads. Abrasive mineral: Very fine grade aluminum oxide. Color: Blue MOS: 23000 RPM
Scotch-Brite™ Surface Conditioning Disc, 7 in x NH A MED, 25 per caseA non-woven abrasive product used for cleaning, finishing, blending and deburring applications. Contains a backing that mounts to hook and loop pads. Abrasive mineral: Medium grade aluminum oxide. Color: Maroon MOS: 6000 RPM
Scotch-Brite™ Surface Conditioning Disc, 7 in x NH A VFN, 25 per caseA non-woven abrasive product used for cleaning, finishing, blending and deburring applications. Contains a backing that mounts to hook and loop pads. Abrasive mineral: Very fine grade aluminum oxide. Color: Blue MOS: 6000 RPM
http://products3.3m.com/catalog/ww/en001/mining/-/node_4...e_ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:09:22 AM
Select a Location
English
By Keyword
3M Global Mining : Adhesive Products
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions
Adhesive Products
[click to enlarge]
3M adhesives provide solutions for bonding, sealing, fastening, and many other needs in the mining and metals industry.
Make a Selection
3M™ Hi-Tack 76 Classic Spray Adhesive Original Formula, 24 oz, 12 per case, Not for sale or use in CA & other states. Consult local air quality rules before use.Not for sale or use in CA and other states. Consult local air quality rules before use. Quick-tacking, fast strength buildup. Aerosol, for bonding hard to hold materials like polyethylene and polypropylene. SBR rubber, fabric and felt.
3M™ Scotch-Grip™ Industrial Adhesive 4799 Black, 5 oz tube, 36 per caseA black, brushable, heat resistant adhesive that develops strength rapidly and provides good creep resistance and low soak-in on porous surfaces. Bond rubber (including EPDM) and many materials such as canvas and linoleum to metal, wood and concrete.
3M™ Scotch-Grip™ Plastic Adhesive 4475 Clear, 5 oz tube, 36 per caseA clear, general purpose adhesive that dries rapidly. Has excellent resistance to plasticizers, water, detergent , and soap solutions. Can be used to bond many ceramics, glass, leather, cloth and vinyls to themselves and a wide variety of substrates.
3M™ Scotch-Grip™ Rubber And Gasket Adhesive 847 Brown, 1 qt, 12 per caseA premium quality, reddish brown, multi-purpose adhesive. Develops strong flexible bonds very rapidly to a wide variety of substrates, including many plastics and rubbers, gasketing materials and leather. Has exceptional resistance to most fuels and oil.
3M™ Scotch-Grip™ Rubber And Gasket Adhesive 1300 Yellow, 1 qt, 12 per caseA yellow, premium quality, versatile, brushable, heat resistant adhesive that develops strength rapidly. Has excellent adhesion to metal, bake enamel, wood, most plastics, and neoprene, reclaim, SBR, and butyl rubber. NOT for EPDM rubber.
3M™ Scotch-Grip™ Rubber And Gasket Adhesive 1300 Yellow, 5 oz tube, 36 per caseA yellow, premium quality, versatile, brushable, heat resistant adhesive that develops strength rapidly.
3M™ Scotch-Weld™ Acrylic Adhesive DP805 Light Yellow, 1.6 fl oz or 47 ml, 12 per caseTwo-part, high performance, toughened acrylic adhesive. It has a 1:1 mix ratio and exhibits exceptional overlap shear and peel strength to both metallic and plastic surfaces. It also exhibits excellent environmental resistance with a 4 minute worklife.
3M™ Scotch-Weld™ Epoxy Adhesive DP125 Gray Duo-Pak, 1.7 fl oz, 12 per caseTwo-part epoxy adhesive with a 1:1 mix ratio, 25 minute worklife and exhibits very high peel strength. Cures at room temperature. Use to bond rubber, metal, wood, plastics, and masonry products.
http://products3.3m.com/catalog/ww/en001/mining/-/nod..._globalmining_3_0/command_AbcPageHandler/output_print (1 of 2)22/11/2006 11:09:29 AM
Select a Location
English
3M Global Mining : Adhesive Products
3M™ Scotch-Weld™ EPX™ Mixing Nozzle 9742, 50 mL, 72 per case3M™ Scotch-Weld™ EPX™ Mixing Nozzle 9742 is for the 50 ml EPX applicator. The applicator is used to dispense 3M™ Scotch-Weld™ adhesives in duo-pak cartridges.
http://products3.3m.com/catalog/ww/en001/mining/-/nod..._globalmining_3_0/command_AbcPageHandler/output_print (2 of 2)22/11/2006 11:09:29 AM
3M Global Mining : 3M™ Hi-Tack 76 Classic Spray Adhesive Original Formula,...e or use in CA & other states. Consult local air quality rules before use.
Product Catalog for 3M Mining Maintenance Solutions Adhesive Products
Printer-friendly format 3M™ Hi-Tack 76 Classic Spray Adhesive Original Formula, 24 oz, 12 per case, Not for sale or use in CA & other states. Consult local air quality rules before use.
[click to
enlarge]
Not for sale or use in CA and other states. Consult local air quality rules before use. Quick-tacking, fast strength buildup. Aerosol, for bonding hard to hold materials like polyethylene and polypropylene. SBR rubber, fabric and felt.
3M Id : 62-4677-4930-5GTIN(UPC/EAN) : 0 00 21200 96317 9
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
This product can effectively bond many hard to hold materials such as polyethylene. It can bond rubber, fabric, felt, cardboard, cork, foil, and many plastics to themselves and to wood, metal, glass, and other surfaces.
Product Catalog for 3M Mining Maintenance Solutions Adhesive Products
Printer-friendly format 3M™ Scotch-Grip™ Industrial Adhesive 4799 Black, 5 oz tube, 36 per case
[click to enlarge]
A black, brushable, heat resistant adhesive that develops strength rapidly and provides good creep resistance and low soak-in on porous surfaces. Bond rubber (including EPDM) and many materials such as canvas and linoleum to metal, wood and concrete.
3M Id : 62-4799-2631-3GTIN(UPC/EAN) : 0 00 21200 21354 0
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Scotch-Grip™ Industrial Adhesive 4799 - Data Sheet (PDF 12.8 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
It dries rapidly to a water and heat resistant bond. GALLONS AND LARGER - NOT INTENDED FOR CONSUMER SALE OR USE.
Product Catalog for 3M Mining Maintenance Solutions Adhesive Products
Printer-friendly format 3M™ Scotch-Grip™ Plastic Adhesive 4475 Clear, 5 oz tube, 36 per case
[click to enlarge]
A clear, general purpose adhesive that dries rapidly. Has excellent resistance to plasticizers, water, detergent , and soap solutions. Can be used to bond many ceramics, glass, leather, cloth and vinyls to themselves and a wide variety of substrates.
3M Id : 62-4475-2631-0GTIN(UPC/EAN) : 0 00 21200 21220 8
Product Catalog for 3M Mining Maintenance Solutions Adhesive Products
Printer-friendly format 3M™ Scotch-Grip™ Rubber And Gasket Adhesive 847 Brown, 1 qt, 12 per case
[click to enlarge]
A premium quality, reddish brown, multi-purpose adhesive. Develops strong flexible bonds very rapidly to a wide variety of substrates, including many plastics and rubbers, gasketing materials and leather. Has exceptional resistance to most fuels and oil.
3M Id : 62-0847-6530-4GTIN(UPC/EAN) : 0 00 21200 19721 5
Product Catalog for 3M Mining Maintenance Solutions Adhesive Products
Printer-friendly format 3M™ Scotch-Grip™ Rubber And Gasket Adhesive 1300 Yellow, 1 qt, 12 per case
[click to enlarge]
A yellow, premium quality, versatile, brushable, heat resistant adhesive that develops strength rapidly. Has excellent adhesion to metal, bake enamel, wood, most plastics, and neoprene, reclaim, SBR, and butyl rubber. NOT for EPDM rubber.
3M Id : 62-1300-6530-3GTIN(UPC/EAN) : 0 00 21200 19871 7
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Scotch-Grip ™ Brand 1300-L Rubber and Gasket Adhesive - Data Sheet (PDF 18.3 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Product Catalog for 3M Mining Maintenance Solutions Adhesive Products
Printer-friendly format 3M™ Scotch-Grip™ Rubber And Gasket Adhesive 1300 Yellow, 5 oz tube, 36 per caseA yellow, premium quality, versatile, brushable, heat resistant adhesive that develops strength rapidly.
3M Id : 62-1300-2631-3GTIN(UPC/EAN) : 0 00 21200 19868 7
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Scotch-Grip ™ Brand 1300-L Rubber and Gasket Adhesive - Data Sheet (PDF 18.3 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Characteristics
Bonding Range Up to 12 MinutesColor Dry Film YellowOverlap Shear Strength at 75 Degrees F (24 Degrees C) for Birch Plywood to Birch Plywood 549 Pound-Force Per Square Inch
Overlap Shear Strength at 180 Degrees F (82 Degrees C) for Birch Plywood to Birch Plywood 136 Pound-Force Per Square Inch
Peel Strength at 75 Degrees F (24 Degrees C) for Canvas to Cold Rolled Steel 52 Pound Per Inch (Of Width)
Primary Trademark Name 3MSize 5 oz.Units per Case 36
Product Catalog for 3M Mining Maintenance Solutions Adhesive Products
Printer-friendly format 3M™ Scotch-Weld™ Acrylic Adhesive DP805 Light Yellow, 1.6 fl oz or 47 ml, 12 per case
[click to enlarge]
Two-part, high performance, toughened acrylic adhesive. It has a 1:1 mix ratio and exhibits exceptional overlap shear and peel strength to both metallic and plastic surfaces. It also exhibits excellent environmental resistance with a 4 minute worklife.
3M Id : 62-3288-1435-5GTIN(UPC/EAN) : 0 00 21200 83758 6
Product Catalog for 3M Mining Maintenance Solutions Adhesive Products
Printer-friendly format 3M™ Scotch-Weld™ Epoxy Adhesive DP125 Gray Duo-Pak, 1.7 fl oz, 12 per case
[click to
enlarge]
Two-part epoxy adhesive with a 1:1 mix ratio, 25 minute worklife and exhibits very high peel strength. Cures at room temperature. Use to bond rubber, metal, wood, plastics, and masonry products.
3M Id : 62-3293-1435-5GTIN(UPC/EAN) : 0 00 21200 87215 0
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
3M™ Epoxy and Hot Melt Adhesives for Electronics - Brochure (PDF 1.6 MB)
Product Catalog for 3M Mining Maintenance Solutions Adhesive Products
Printer-friendly format 3M™ Scotch-Weld™ EPX™ Mixing Nozzle 9742, 50 mL, 72 per case
[click to enlarge]
3M™ Scotch-Weld™ EPX™ Mixing Nozzle 9742 is for the 50 ml EPX applicator. The applicator is used to dispense 3M™ Scotch-Weld™ adhesives in duo-pak cartridges.
3M Id : 62-9742-9935-6GTIN(UPC/EAN) : 0 00 21200 21791 3
Additional Information
Learn More . . .
PackagingData
This mixing nozzle is for the 50 ml EPX Applicator. The 50 ml EPX Applicator is used to dispense 3M™ Scotch-Weld™ Adhesives in Duo-Pak Cartridges.
http://products3.3m.com/catalog/ww/en001/mining/-/node_..._ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:10:48 AM
Select a Location
English
By Keyword
3M Global Mining : Cleaning Products
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions
Cleaning Products
[click to enlarge]
Use 5-Way Penetrant, Citrus Based Cleaner, High Performance Cloths and Silicone Lubricant to keep your operations clean and running efficiently.
Make a Selection
3M™ Citrus Base Cleaner, 6 oz, 24 per caseA liquid cleaner/degreaser that can be used to dissolve and remove dirt, grease, tar, and many non-curing type adhesives. It can also be used to degrease substrates for adhesive bonding in place of many chlorinated or petroleum-based solvents.
Scotch-Brite™ High Performance ClothDurable cleaning cloth, lifts and traps dust, grease, oils and fingerprints. Ideal for cleaning instrument gauges, safety glasses and helmet visors.
Product Catalog for 3M Mining Maintenance Solutions Cleaning Products
Printer-friendly format 3M™ Citrus Base Cleaner, 6 oz, 24 per case
[click to
enlarge]
A liquid cleaner/degreaser that can be used to dissolve and remove dirt, grease, tar, and many non-curing type adhesives. It can also be used to degrease substrates for adhesive bonding in place of many chlorinated or petroleum-based solvents.
3M Id : CS-0406-6966-8
Additional InformationIt contains no petroleum distillates. 3M™ Citrus Base Cleaner can be used to clean and degrease metal parts, motors, tools, printing presses, concrete, or almost any dirty or greasy surface.
Product Catalog for 3M Mining Maintenance Solutions Cleaning Products
Printer-friendly format Scotch-Brite™ High Performance Cloth
[click to enlarge]
Durable cleaning cloth, lifts and traps dust, grease, oils and fingerprints. Ideal for cleaning instrument gauges, safety glasses and helmet visors.
Make a Selection
Scotch-Brite™ High Performance Cleaning Cloth 2011 YellowSpecifically designed with a unique combination of bi-component microfibers and knit construction for safe, effective cleaning on the most delicate surfaces. So effective - you can clean without chemicals! 32 cm x 36 cm, 50 per case
Scotch-Brite™ High Performance Cleaning Cloth, 2011, Blue 32 cm x 36 cm 50/csSpecifically designed with a unique combination of bi-component microfibers and knit construction for safe, effective cleaning on the most delicate surfaces. So effective - you can clean without chemicals! 32 cm x 36 cm, 50 per case
Scotch-Brite™ High Performance Cleaning Cloth, 2011, GreenSpecifically designed with a unique combination of bi-component microfibers and knit construction for safe, effective cleaning on the most delicate surfaces. So effective - you can clean without chemicals! 32 cm x 36 cm, 50 per case
Scotch-Brite™ High Performance Cleaning Cloth, 2011, White, 50/caseSpecifically designed with a unique combination of bi-component microfibers and knit construction for safe, effective cleaning on the most delicate surfaces. So effective - you can clean without chemicals! 32 cm x 36 cm, 50 per case
http://products3.3m.com/catalog/ww/en001/mining/-/node_P...e_ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:11:21 AM
Select a Location
English
By Keyword
3M Global Mining : Tape Products
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions
Tape Products
[click to enlarge]
3M has a large product family of tapes including: Duct, Aluminum, Glass Cloth, Double Coated, Foam, Masking, Film, Sealing, Safety Stripe, Luminous, Vinyl and Electroplating Tapes.
Make a Selection
3M™ High Temperature Aluminum Foil/Glass Cloth Tape 363 Silver, 2 in x 36 yd 7.3 mil, 24 per case3M™ High Temperature Aluminum Foil/Glass Coth Tape 363 Silver, aluminum foil backing combined with a glass cloth and pressure sensitive silicone adhesive
3M™ Masking Tape 2307 Natural, 18 mm x 55 m, 48 per case BulkA general purpose masking tape for holding, bundling, sealing, paint masking and a vast number of other jobs where a paper masking tape is needed. Tape 2307 is typically used at room temperature but will function up to 200 degrees F ( 93 C ).
3M™ PTFE Glass Cloth Tape 5451 Brown, 2 in x 36 yd 5.3 mil, 6 per case Boxed3M™ PTFE Glass Cloth Tape 5451 Brown, premium performance, glass cloth tape impregnated with PTFE and silicone adhesive. Tape 5451 is a heat seal tape.
3M™ Super Bond Film Tape 396 Transparent, 2 in x 36 yd, 24 per case3M™ Super Bond Film Tape 396, Transparent, 4.1 mil (0.10mm), polyester film tape with a thick layer of rubber adhesive
3M™ UHMW Film Tape 5421 Transparent, 1 in x 18 yd 6.7 mil, 9 per case Boxed3M™ UHMW Polyethylene Tape 5421 Transparent, UHMW polyethylene film with rubber adhesive.
Acrylic Foam TapeHigh strength 3M™ VHB™ tapes are used throughout industry to replace mechanical fastening for permanent assembly in many applications.
Aluminum Foil TapeDead-soft aluminum foil tape. Applications include masking of sensitive components to protect from damage during paint stripping.
Double Coated TapeDouble coated tape that is high-tack, hand-tearable double coated film tape with a pressure sensitive adhesive on each side of the carrier.
Double Coated Urethane Foam TapeOff-white, open-cell urethane foam carrier. Features High shear adhesive with high temperature resistance.
Glass Cloth TapeGlass cloth tape with silicone adhesive. High temperature resistance, high adhesion, and a very strong, abrasion resistant backing.
http://products3.3m.com/catalog/ww/en001/mining/-/nod..._globalmining_3_0/command_AbcPageHandler/output_print (1 of 2)22/11/2006 11:11:30 AM
Select a Location
English
3M Global Mining : Tape Products
High Performance Double Coated TapeFeatures a meduim-firm acrylic pressure adhesive system, for a combination of high grab and initial adhesion with excellent static shear holding power.
Safety Stripe TapeHighly conformable and resistant to most common solvents. Clear vinyl over colored stripes provides excellent abrasion resistance to the tape's stripped pattern. Ideal for calling speacial attention to overhead hazards, stairs, forklift traffic, and potentially dangerous pinch points on equipment.
Product Catalog for 3M Mining Maintenance Solutions Tape Products
Printer-friendly format 3M™ High Temperature Aluminum Foil/Glass Cloth Tape 363 Silver, 2 in x 36 yd 7.3 mil, 24 per case
[click to enlarge]
3M™ High Temperature Aluminum Foil/Glass Coth Tape 363 Silver, aluminum foil backing combined with a glass cloth and pressure sensitive silicone adhesive
3M Id : 70-0060-6880-6GTIN(UPC/EAN) : 0 00 21200 17295 3
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
3M™ HiTemp Aluminum Foil_Glass Cloth 363 and 363L - Data Sheet (PDF 10.2 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ High Temperature Aluminum Foil/Glass Cloth Tape 363 is a strong, flexible tape that can be used as a high temperature heat reflective, protective wrap for heat sensitive cables and other instruments in many aerospace and industrial applications.
Characteristics
Adhesive Material Silicone
Backing Material Aluminum foil laminated to glass cloth
Product Catalog for 3M Mining Maintenance Solutions Tape Products
Printer-friendly format 3M™ Masking Tape 2307 Natural, 18 mm x 55 m, 48 per case Bulk
[click to enlarge]
A general purpose masking tape for holding, bundling, sealing, paint masking and a vast number of other jobs where a paper masking tape is needed. Tape 2307 is typically used at room temperature but will function up to 200 degrees F ( 93 C ).
3M Id : 70-0061-5951-4GTIN(UPC/EAN) : 0 00 21200 71117 6
Additional Information
Learn More . . .
Packaging Data
3M Maksing Tape 2307 - Data Sheet (PDF 10.1 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Characteristics
Adhesive Material Rubber ResinBacking Material Crepe PaperLength 55 Linear Metre Primary Trademark Name 3M
Product Catalog for 3M Mining Maintenance Solutions Tape Products
Printer-friendly format 3M™ PTFE Glass Cloth Tape 5451 Brown, 2 in x 36 yd 5.3 mil, 6 per case Boxed
[click to enlarge]
3M™ PTFE Glass Cloth Tape 5451 Brown, premium performance, glass cloth tape impregnated with PTFE and silicone adhesive. Tape 5451 is a heat seal tape.
3M Id : 70-0160-5451-5GTIN(UPC/EAN) : 0 00 21200 16154 4
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ PTFE Glass Cloth Tape 5451, premium performance PTFE combined with glass cloth is resistant to most chemicals, provides a slick surface, high tensile strength, puncture resistance and abrasion resistance with low moisture absorption. These products provide long lasting, easy release performance on heat sealing machines and process equipment. You also can use the tapes to keep production
Full Text . . .
Characteristics
Adhesive Material SiliconeBacking Material Glass cloth impregnated w/PTFEColor BrownLength 36 Linear Yard Primary Trademark Name 3M
Product Catalog for 3M Mining Maintenance Solutions Tape Products
Printer-friendly format 3M™ Super Bond Film Tape 396 Transparent, 2 in x 36 yd, 24 per case
[click to enlarge]
3M™ Super Bond Film Tape 396, Transparent, 4.1 mil (0.10mm), polyester film tape with a thick layer of rubber adhesive
3M Id : 70-0060-7663-5GTIN(UPC/EAN) : 0 00 21200 19086 5
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
3M™ Super Bond™ Film Tape 396 - Data Sheet (PDF 14.6 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Super Bond Film Tape 396, the thin caliper and tensile strength of the polyester backing, with extremely high immediate adhesion and holding power of the rubber-resin adhesive allow this tape to work well for a wide variety of applications. Excellent Adhesion to low-energy surfaces such as polyethylene.
Characteristics
Adhesive Material Rubber ResinBacking Material PolyesterColor TransparentLength 36 Linear Yard Primary Trademark Name 3M
3M™ UHMW Polyethylene 5421 and 5423 Tape - Data Sheet (PDF 10.2 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ UHMW Polyethylene Tape 5421 helps protect plastic and metal chutes, guide rails and containers from wear. Low coefficient of friction combined with abrasion resistance make this tape an effective solution for many noise and vibration problems.
Characteristics
Adhesive Material Rubber ResinBacking Material UHMWPLength 18 Linear Yard Primary Trademark Name 3M
Product Catalog for 3M Mining Maintenance Solutions Tape Products
Printer-friendly format Acrylic Foam Tape
[click to enlarge]
High strength 3M™ VHB™ tapes are used throughout industry to replace mechanical fastening for permanent assembly in many applications.
Make a Selection
3M™ VHB™ Acrylic Foam Tape 4950 White,18mm x33m, 12 per case45.0 mil, thick white closed cell acrylic foam carrier with all purpose acrylic adhesive and paper liner. High strength, handling convenience, cushioning, damping and impact resistance. UL listing 746C.
3M™ VHB™ Acrylic Foam Tape 4950 White,24mm x33m, 9 per case45.0 mil, thick white closed cell acrylic foam carrier with all purpose acrylic adhesive and paper liner. High strength, handling convenience, cushioning, damping and impact resistance. UL listing 746C.
Product Catalog for 3M Mining Maintenance Solutions Tape Products
Printer-friendly format Aluminum Foil Tape
[click to enlarge]
Dead-soft aluminum foil tape. Applications include masking of sensitive components to protect from damage during paint stripping.
Make a Selection
3M™ Aluminum Foil Tape 425 Silver, 1 in x 60 yd 4.6 mil, 36 per case Bulk3M™ Aluminum Foil Tape 425 Silver, 4.6 mil (0.12mm), Dead-soft aluminum foil tape with a pressure sensitive acrylic adhesive
3M™ Aluminum Foil Tape 425 Silver, 2 in x 60 yd 4.6 mil, 24 per case Bulk3M™ Aluminum Foil Tape 425 Silver, 4.6 mil (0.12mm), Dead-soft aluminum foil tape with a pressure sensitive acrylic adhesive
3M™ Aluminum Foil Tape 425 Silver, 3 in x 60 yd 4.6 mil, 12 per case Bulk3M™ Aluminum Foil Tape 425 Silver, 4.6 mil (0.12mm), Dead-soft aluminum foil tape with a pressure sensitive acrylic adhesive
Product Catalog for 3M Mining Maintenance Solutions Tape Products
Printer-friendly format Double Coated Tape
[click to enlarge]
Double coated tape that is high-tack, hand-tearable double coated film tape with a pressure sensitive adhesive on each side of the carrier.
Make a Selection
3M™ Double Coated Tape 9579 White, 1 1/2 in x 36 yd 9.0 mil, 24 rolls per case Bulk9.0 mil double coated high density polyethylene with rubber adhesive 760 on a 60 lb white densified kraft liner
3M™ Double Coated Tape 9579 White, 3/4 in x 36 yd 9.0 mil, 48 rolls per case Bulk9.0 mil double coated high density polyethylene with rubber adhesive 760 on a 60 lb white densified kraft liner
Product Catalog for 3M Mining Maintenance Solutions Tape Products
Printer-friendly format Double Coated Urethane Foam Tape
[click to enlarge]
Off-white, open-cell urethane foam carrier. Features High shear adhesive with high temperature resistance.
Make a Selection
3M™ Double Coated Urethane Foam Tape 4026 Off-White, 12mm x 33m, 18 per case1/16 in. Thick off white, Open Cell Urethane Foam Flexible Carrier with High Shear, High Temperature Resistant Acrylic Adhesive. Use to Fill Gaps and Bond Irregular Surfaces. Distributes Stress Uniformly Over Bonded Area. Apply by Hand or with Dispenser.
3M™ Double Coated Urethane Foam Tape 4026 Off-White,18mm x33m, 12 per case1/16 in. Thick off white, Open Cell Urethane Foam Flexible Carrier with High Shear, High Temperature Resistant Acrylic Adhesive. Use to Fill Gaps and Bond Irregular Surfaces. Distributes Stress Uniformly Over Bonded Area. Apply by Hand or with Dispenser.
3M™ Double Coated Urethane Foam Tape 4026 Off-White,24mm x 33m, 9 per caseOpen cell urethane foam flexible carrier with high shear, high temperature resistant acrylic adhesive. Use to fill gaps and bond irregular surfaces. Distributes stress uniformly over bonded area. Apply by hand or with dispenser.
Product Catalog for 3M Mining Maintenance Solutions Tape Products
Printer-friendly format Glass Cloth Tape
[click to enlarge]
Glass cloth tape with silicone adhesive. High temperature resistance, high adhesion, and a very strong, abrasion resistant backing.
Make a Selection
3M™ Glass Cloth Tape 361 White, 1 in x 60 yd 7.5 mil, 36 per case BulkWhite, 7.5 mil (0.14 mm) glass cloth tape with silicone adhesive. Used for many applications requiring high temperature resistance, high adhesion, and a very strong, abrasion resistant backing such as masking protection in thermal spray operations.
3M™ Glass Cloth Tape 361 White, 1/2 in x 60 yd 7.5 mil, 72 per case BulkWhite, 7.5 mil (0.14 mm) glass cloth tape with silicone adhesive. Used for many applications requiring high temperature resistance, high adhesion, and a very strong, abrasion resistant backing such as masking protection in thermal spray operations.
3M™ Glass Cloth Tape 361 White, 2 in x 60 yd 7.5 mil, 24 per case BulkWhite, 7.5 mil (0.14 mm) glass cloth tape with silicone adhesive. Used for many applications requiring high temperature resistance, high adhesion, and a very strong, abrasion resistant backing such as masking protection in thermal spray operations.
Product Catalog for 3M Mining Maintenance Solutions Tape Products
Printer-friendly format High Performance Double Coated Tape
[click to enlarge]
Features a meduim-firm acrylic pressure adhesive system, for a combination of high grab and initial adhesion with excellent static shear holding power.
Make a Selection
3M™ High Performance Double Coated Tape 9573 25mm x 50m 36 rolls per case3M™ HP Double-Coated Tape 9573 25mm x 50m 12/ctn
3M™ High Performance Double Coated Tape 9573 50mm x 50m 18 rolls per case3M™ HP Double-Coated Tape 9573 50mm x 50m 6/ctn
Product Catalog for 3M Mining Maintenance Solutions Tape Products
Printer-friendly format Safety Stripe Tape
[click to enlarge]
Highly conformable and resistant to most common solvents. Clear vinyl over colored stripes provides excellent abrasion resistance to the tape's stripped pattern. Ideal for calling speacial attention to overhead hazards, stairs, forklift traffic, and potentially dangerous pinch points on equipment.
Make a Selection
3M™ Safety Stripe Tape 5702 Black/Yellow, 2 in x 36 yd 5.4 mil, 24 per case Bulk3M™ Safety Stripe Tape 5702 Black/Yellow, 5.4 mil (0.14 mm) vinyl backing with rubber adhesive, resists most common solvents
3M™ Safety Stripe Tape 5702 Black/Yellow, 4 in x 36 yd 5.4 mil, 8 per case Bulk3M™ Safety Stripe Tape 5702 Black/Yellow, 5.4 mil (0.14 mm) vinyl backing with rubber adhesive, resists most common solvents
http://products3.3m.com/catalog/ww/en001/mining/-/node_R..._ww_globalmining_3_0/command_AbcPageHandler/output_print22/11/2006 11:13:45 AM
Select a Location
English
3M Global Mining : Glass Bubbles
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Mining Specific
Glass Bubbles
[click to enlarge]
Glass bubbles incorporated into emulsion formulations as a sensitizing agent can improve blast efficiency and relizbility. A broad range of densities and strengths are available to match a wide range of slurry and emulsion requirements.
Make a Selection
K-SeriesThe general purpose K Series glass bubbles are the most economical 3M glass bubbles.
S-SeriesThe S Series glass bubbles have smaller particle sizes than the K Series.
Product Catalog for 3M Mining Mining Specific Glass Bubbles
Printer-friendly format K-SeriesThe general purpose K Series glass bubbles are the most economical 3M glass bubbles.
Make a Selection
3M™ Glass Bubbles K1, Large box (210 lb, 95.4 kg)K1 glass bubbles have a density of 0.125 g/cc and an isostatic crush strength of 250 psi. The general purpose K Series glass bubbles are the most economical 3M glass bubbles.
3M™ Glass Bubbles K1, Small box (40 lb, 18 kg)K1 glass bubbles have a density of 0.125 g/cc and an isostatic crush strength of 250 psi. The general purpose K Series glass bubbles are the most economical 3M glass bubbles.
3M™ Glass Bubbles K20, Small box (60 lb, 27 kg)K20 glass bubbles have a density of 0.2 g/cc and an isostatic crush strength of 500 psi. The general purpose K Series glass bubbles are the most economical 3M glass bubbles.
3M™ Glass Bubbles K37, Small box (100 lb, 45.4 kg)K37 glass bubbles have a density of 0.37 g/cc and an isostatic crush strength of 3000 psi. The general purpose K Series glass bubbles are the most economical 3M glass bubbles.
Product Catalog for 3M Mining Mining Specific Glass Bubbles
Printer-friendly format S-SeriesThe S Series glass bubbles have smaller particle sizes than the K Series.
Make a Selection
3M™ Glass Bubbles S15, Small box (50 lb, 23 kg)Because of their high strength-to-weight ratio and spherical shape, Scotchlite S15 glass bubbles are used by formulators to increase filler loading, lower viscosity, reduce shrinkage, reduce warping and increase buoyancy.
3M™ Glass Bubbles S22, Small box (60 lb, 27 kg)S22 glass bubbles have a density of 0.22 g/cc and an isostatic crush strength of 400 psi. The S Series glass bubbles have smaller particle sizes than the K Series.
3M™ Glass Bubbles S38, Large box (680 lb, 309 kg)S38 glass bubbles have a density of 0.38 g/cc and an isostatic crush strength of 4000 psi. The S Series glass bubbles have smaller particle sizes than the K Series.
http://products3.3m.com/catalog/ww/en001/mining/-/node_S...e_ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:14:11 AM
Select a Location
English
By Keyword
3M Global Mining : Fire Protection Products
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Site Safety
Fire Protection Products
[click to enlarge]
Fire protection products help to prevent fire, smoke, toxic fumes and moisture from passing through penetrations in fire-rated walls and floors. These easy-to-install products are suitable for a wide variety of firestop applications, including plastic pipes, metal pipes, HVAC ductwork, cables, construction gaps, grease ducts, wall tops and control joints.
Make a Selection
3M™ Fire Barrier FS-195+ Wrap/Strip - 2" X 24"One-part, intumescent elastomeric strip with foil on one side. Documented aging properties. Can be cut to fit irregular shapes. Up to 4 hours of Fire Protection.
3M™ Fire Barrier Mortar (44-Pound Bag)Lightweight cementitious firestop with excellent adhesion, bonds to concrete, metals, wood, plastic and cable jacketing. (44 Pound Bag)
3M™ Fire Barrier Plastic Pipe Device PPD6Used to firestop a 6" non-metallic pipe. One piece metal collar assembly encasing 3M's heat expanding FS-195+, used for new and retrofit installations to achieve up to 3 hour fire ratings.
3M™ Fire Barrier Restricting Collar RC-1 - 2"Works in conjunction with 3M FS-195+ wrap/strip or Ultra GS for firestopping penetrations in wall and floor ceiling assemblies.
Product Catalog for 3M Mining Site Safety Fire Protection Products
Printer-friendly format 3M™ Fire Barrier FS-195+ Wrap/Strip - 2" X 24"
[click to enlarge]
One-part, intumescent elastomeric strip with foil on one side. Documented aging properties. Can be cut to fit irregular shapes. Up to 4 hours of Fire Protection.
3M Id : 98-0400-2222-4GTIN(UPC/EAN) : 0 00 51115 07115 7
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Used to firestop metallic and non metallic pipes, insulated pipes and cable bundles. Can be used with the 3M™ Fire Barrier Restricting Collar RC-1 or with caulk in "in-hole" applications. 24 - inch (609 mm) strips, two inches (50 cm) wide.
Product Catalog for 3M Mining Site Safety Fire Protection Products
Printer-friendly format 3M™ Fire Barrier Mortar (44-Pound Bag)
[click to
enlarge]
Lightweight cementitious firestop with excellent adhesion, bonds to concrete, metals, wood, plastic and cable jacketing. (44 Pound Bag)
3M Id : 98-0400-2646-4GTIN(UPC/EAN) : 0 00 51115 07559 9
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Variable mix ratio permits self-leveling and no-sag application consistencies. Re-enterable no power tools needed. Bonds to itself - proven prior to and during fire testing. Pumpability allows faster installation. Greater resistance to common concrete poisons than PC-bound products. Contains no asbestos.
Product Catalog for 3M Mining Site Safety Fire Protection Products
Printer-friendly format 3M™ Fire Barrier Plastic Pipe Device PPD6
[click to enlarge]
Used to firestop a 6" non-metallic pipe. One piece metal collar assembly encasing 3M's heat expanding FS-195+, used for new and retrofit installations to achieve up to 3 hour fire ratings.
3M Id : 98-0400-2944-3GTIN(UPC/EAN) : 0 00 51115 08253 5
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Product Catalog for 3M Mining Site Safety Fire Protection Products
Printer-friendly format 3M™ Fire Barrier Restricting Collar RC-1 - 2"
[click to enlarge]
Works in conjunction with 3M FS-195+ wrap/strip or Ultra GS for firestopping penetrations in wall and floor ceiling assemblies.
3M Id : 80-0080-0656-3GTIN(UPC/EAN) : 0 00 54007 08324 5
Additional Information
Learn More . . .
PackagingData
The RC-1 Restricing Collar is used with Fire Barrier Wrap/Strip to restrict openings and direct the intumescence of the wrap/strip inward, filling all voids.
Product Catalog for 3M Mining Site Safety Fire Protection Products
Printer-friendly format Fire Barrier Composite Sheet
Make a Selection
3M™ Fire Barrier CS-195+ Composite Sheet - 36" X 24" BoxedA 36" x 24" one-part composite system comprised of four components, used for shielding cable trays and conduit, HVAC ductwork and vital process equipment from radiant heat, flame spread and smoke.
3M™ Fire Barrier CS-195+ Composite Sheet - 36" X 41" BoxedA 36" x 41" one-part composite system comprised of four components, used for shielding cable trays and conduit, HVAC ductwork and vital process equipment from radiant heat, flame spread and smoke.
Product Catalog for 3M Mining Site Safety Fire Protection Products
Printer-friendly format Fire Barrier Pipe Device Hose Clamp Ultra
Make a Selection
3M™ Interam™ Ultra Plastic Pipe Device UPPD2Used to firestop a 2" non-metallic pipe. One piece metal collar assembly encasing 3M's heat expanding Ultra GS, used for new and retrofit installations to achieve up to 3 hour fire ratings.
3M™ Interam™ Ultra Plastic Pipe Device UPPD3Used to firestop a 3" non-metallic pipe. One piece metal collar assembly encasing 3M's heat expanding Ultra GS, used for new and retrofit installations to achieve up to 3 hour fire ratings.
3M™ Interam™ Ultra Plastic Pipe Device UPPD4Used to firestop a 4" non-metallic pipe. One piece metal collar assembly encasing 3M's heat expanding Ultra GS, used for new and retrofit installations to achieve up to 3 hour fire ratings.
http://products3.3m.com/catalog/ww/en001/mining/-/node_F...e_ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:15:09 AM
Select a Location
English
By Keyword
3M Global Mining : Sorbents
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Site Safety
Sorbents
[click to enlarge]
Sorbent products are available in many shapes and sizes to meet all spill response needs, and can be used in a wide variety of applications ranging from simple maintenance to emergency spills and cleanups.
Make a Selection
3M™ Maintenance Sorbent Drum Cover M-DC22DD, High Capacity 25/CaseThe sorbent drum cover is designed to be used on a 55 gallon drum to catch drips and spills that occur during the dispensing of all types of non-aggressive liquids used in daily operations. Contains 25 covers per case and sorbs 12 gallons/case.
3M™ Maintenance Sorbent Folded M-FL550DD, High Capacity 3 Boxes/Case = 1 EachThis high capacity sorbent has a scrim on one side to increase strength and help eliminate linting. It is dispensed from a carrying/dispenser box in the form of a continuous roll with perforations every 16 inches.
3M™ Maintenance Sorbent Production Pad M-PD720GG, High Capacity 100 Pads/CaseUsed to clean up small spills and wipe down oily tools and equipment. Designed to be placed on machinery to catch leaks at the source. Each case sorbs 31.5 gallons and contains 100 pads (each 7.5 inches by 20.5 inches).
3M™ Maintenance Sorbent Roll M-RL38150DD, High Capacity 1 Roll/CaseDesigned to cover large surfaces and may be easily cut to fit tight corners. Can also be used to cover large spills or as a precaution in areas where large spills may occur. Each roll is 38 inches by 150 feet and sorbs 76 gallons.
3M™ Maintenance Sorbent Rug M-RGC36100E, with Coating 1 Rug/CaseThis rug is designed for use in industrial maintenance applications where foot and vehicle traffic is a concern, and will sorb most non-aggressive liquids . Each rug comes in a roll 36 inches by 100 feet and sorbs 10.5 gallons per roll.
Product Catalog for 3M Mining Site Safety Sorbents
Printer-friendly format 3M™ Maintenance Sorbent Drum Cover M-DC22DD, High Capacity 25/Case
[click to enlarge]
The sorbent drum cover is designed to be used on a 55 gallon drum to catch drips and spills that occur during the dispensing of all types of non-aggressive liquids used in daily operations. Contains 25 covers per case and sorbs 12 gallons/case.
3M Id : 70-0704-0591-8GTIN(UPC/EAN) : 5 00 51138 28998 5
Failure to properly handle and dispose of sorbents contaminated by hazardous materials can result in serious physical injury or death and/or environmental harm. For proper handling, consult the Material Safety Data Sheet for the material absorbed. For applicable safety and health standards, contact your supervisor, or call 3M Occupational Health and Environmental Safety Division (OH&ESD) Technical Service at 1-800-243-4630. To reduce the risk of serious physical injury or death, always use respiratory protection and protective clothing appropriate for handling the material to be absorbed. Transportation and disposal of spent sorbents must comply with all applicable federal, state and local laws and regulations. CautionSorbents may become slippery when used on flooring. Do not walk on sorbents or place in high traffic areas.
web-warning-9
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
This drum cover sorbent has a scrim on one side to increase strength and help eliminate linting. With cut-outs for dispensing bungs and a skirt which fits neatly around the base of the drum to catch any drips that would normally end up on the floor.
Product Catalog for 3M Mining Site Safety Sorbents
Printer-friendly format 3M™ Maintenance Sorbent Folded M-FL550DD, High Capacity 3 Boxes/Case = 1 Each
[click to enlarge]
This high capacity sorbent has a scrim on one side to increase strength and help eliminate linting. It is dispensed from a carrying/dispenser box in the form of a continuous roll with perforations every 16 inches.
3M Id : 70-0704-0791-4GTIN(UPC/EAN) : 0 00 51138 29071 9
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
3M Maintenance Sorbent Product Information Sheet - Technical Information (PDF 1.3 MB)
3M Spill Control Catalogue - Brochure (PDF 932.5 K)
Specifications and Ordering Info for Maintenance Sorbent - Folde - Product Selection Guide (PDF 4.7 K)
Specifications and Ordering Info for Maintenance Sorbent - Rugs - Product Selection Guide (PDF 4.9 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Utilizing 3M's folded sorbent technology, it can be used as a pillow, pad, roll or boom. Applications range from maintenance to spill response.
CharacteristicsPrimary Trademark Name 3M
Size 5 in x 50 ftSorption 31.5 gallons/caseUnits per Case 3
Product Catalog for 3M Mining Site Safety Sorbents
Printer-friendly format 3M™ Maintenance Sorbent Production Pad M-PD720GG, High Capacity 100 Pads/Case
[click to enlarge]
Used to clean up small spills and wipe down oily tools and equipment. Designed to be placed on machinery to catch leaks at the source. Each case sorbs 31.5 gallons and contains 100 pads (each 7.5 inches by 20.5 inches).
3M Id : 70-0704-0587-6GTIN(UPC/EAN) : 5 00 51138 28994 7
Failure to properly handle and dispose of sorbents contaminated by hazardous materials can result in serious physical injury or death and/or environmental harm. For proper handling, consult the Material Safety Data Sheet for the material absorbed. For applicable safety and health standards, contact your supervisor, or call 3M Occupational Health and Environmental Safety Division (OH&ESD) Technical Service at 1-800-243-4630. To reduce the risk of serious physical injury or death, always use respiratory protection and protective clothing appropriate for handling the material to be absorbed. Transportation and disposal of spent sorbents must comply with all applicable federal, state and local laws and regulations. CautionSorbents may become slippery when used on flooring. Do not walk on sorbents or place in high traffic areas.
web-warning-9
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
This high capacity sorbent has a scrim on one side to increase strength and help eliminate linting. This conveniently sized pad allows the user to quickly spread sorbent on and in the path of a spill. It can also be used on a work surface in anticipation of a spill or as a wipe.
Product Catalog for 3M Mining Site Safety Sorbents
Printer-friendly format 3M™ Maintenance Sorbent Roll M-RL38150DD, High Capacity 1 Roll/Case
[click to enlarge]
Designed to cover large surfaces and may be easily cut to fit tight corners. Can also be used to cover large spills or as a precaution in areas where large spills may occur. Each roll is 38 inches by 150 feet and sorbs 76 gallons.
3M Id : 70-0704-0590-0GTIN(UPC/EAN) : 0 00 51138 28997 3
Failure to properly handle and dispose of sorbents contaminated by hazardous materials can result in serious physical injury or death and/or environmental harm. For proper handling, consult the Material Safety Data Sheet for the material absorbed. For applicable safety and health standards, contact your supervisor, or call 3M Occupational Health and Environmental Safety Division (OH&ESD) Technical Service at 1-800-243-4630. To reduce the risk of serious physical injury or death, always use respiratory protection and protective clothing appropriate for handling the material to be absorbed. Transportation and disposal of spent sorbents must comply with all applicable federal, state and local laws and regulations. CautionSorbents may become slippery when used on flooring. Do not walk on sorbents or place in high traffic areas.
web-warning-9
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
This sorbent pad has a scrim on one side to increase the strength and help eliminate linting. Available in a convenient width of 38 inches, perfect for lining drawers, covering workbenches, or masking larger areas from mist and overspray. Rolls of sorbent material are used to cover and sorb large spills or in areas where spills may occur. Conveniently packaged so that they may be cut to the
Product Catalog for 3M Mining Site Safety Sorbents
Printer-friendly format 3M™ Maintenance Sorbent Rug M-RGC36100E, with Coating 1 Rug/Case
[click to enlarge]
This rug is designed for use in industrial maintenance applications where foot and vehicle traffic is a concern, and will sorb most non-aggressive liquids . Each rug comes in a roll 36 inches by 100 feet and sorbs 10.5 gallons per roll.
3M Id : 70-0704-0623-9GTIN(UPC/EAN) : 0 00 51138 29003 0
Failure to properly handle and dispose of sorbents contaminated by hazardous materials can result in serious physical injury or death and/or environmental harm. For proper handling, consult the Material Safety Data Sheet for the material absorbed. For applicable safety and health standards, contact your supervisor, or call 3M Occupational Health and Environmental Safety Division (OH&ESD) Technical Service at 1-800-243-4630. To reduce the risk of serious physical injury or death, always use respiratory protection and protective clothing appropriate for handling the material to be absorbed. Transportation and disposal of spent sorbents must comply with all applicable federal, state and local laws and regulations. CautionSorbents may become slippery when used on flooring. Do not walk on sorbents or place in high traffic areas.
web-warning-9
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
This sorbent rug is used in areas where foot and vehicle traffic is an concern. Designed to sorb liquids while enduring the punishment of being tread upon, it is both durable and versatile. The coated rug material can be used on a clean and smooth floor to insure that the material does not slip when walked upon. It may also be used as a barrier to protect the floor or other surface below it from
http://products3.3m.com/catalog/ww/en001/mining/-/nod...w_globalmining_3_0/command_AbcPageHandler/output_html (1 of 2)22/11/2006 11:16:06 AM
Select a Location
English
By Keyword
Email
3M Global Mining : 3M™ Maintenance Sorbent Rug M-RGC36100E, with Coating 1 Rug/Case
http://products3.3m.com/catalog/ww/en001/mining/-/nod...w_globalmining_3_0/command_AbcPageHandler/output_html (2 of 2)22/11/2006 11:16:06 AM
3M Global Mining : Traffic Control Products
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Site Safety
Traffic Control Products
[click to enlarge]
These products are for site traffic safety, control and guidance. From Clean-Walk™ mats to Safety-Walk™ this group of products ensures a safer working environment.
Make a Selection
3M™ Clean-Walk Mat 5802, 24 in x 45 in, 30 per pad, 4 pads per case, RestrictedAn adhesive coated mat that is used in removing dirt from the bottom of shoes, wheels or any passing objects. To expose an adhesive surface, just peel the top sheet back.
3M™ Safety-Walk™ Conformable Tread 19280 Black, 2 in x 60 ft, 2 per caseIdeal for use on diamond grade safety plates., steps and other irregular surfaces. Mineral coated, slip-resistant with aluminum foil backing. Conforms to irregular surfaces and around edges.
Safety-Walk™ General Purpose TreadThis mineral-coated, slip-resistant material features a highly durable surface. Low-profile design reduces trip hazard.
Vinyl Lane Marking TapeVinyl film tape with a rubber adhesive, ideal for safety marking requirements. Available in a variety of sizes and colours.
Product Catalog for 3M Mining Site Safety Traffic Control Products
Printer-friendly format 3M™ Clean-Walk Mat 5802, 24 in x 45 in, 30 per pad, 4 pads per case, Restricted
[click to
enlarge]
An adhesive coated mat that is used in removing dirt from the bottom of shoes, wheels or any passing objects. To expose an adhesive surface, just peel the top sheet back.
3M Id : 70-0061-6265-8GTIN(UPC/EAN) : 0 00 21200 23216 9
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Characteristics
Adhesive Material SyntheticBacking Material PolyethyleneLength 45 Inch Mat Color WhitePrimary Trademark Name 3M
Product Catalog for 3M Mining Site Safety Traffic Control Products
Printer-friendly format 3M™ Safety-Walk™ Conformable Tread 19280 Black, 2 in x 60 ft, 2 per case
[click to enlarge]
Ideal for use on diamond grade safety plates., steps and other irregular surfaces. Mineral coated, slip-resistant with aluminum foil backing. Conforms to irregular surfaces and around edges.
3M Id : 70-0705-4864-2GTIN(UPC/EAN) : 5 00 48011 19280 7
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
High-friction, slip-resistant material has a special aluminum backing that conforms around corners and adheres to irregular surfaces. Applications: diamond grade safety plates, steps and ladder rungs. Heavy equipment and vehicles. Available in custom sizes and with custom adhesives.
Characteristics
Adhesives YesColor BlackLength 60 Linear Foot Primary Trademark Name Safety-Walk
Substrate Material Aluminum FoilSurface Material MineralWidth 2 Inch
Product Catalog for 3M Mining Site Safety Traffic Control Products
Printer-friendly format Safety-Walk™ General Purpose Tread
[click to enlarge]
This mineral-coated, slip-resistant material features a highly durable surface. Low-profile design reduces trip hazard.
Make a Selection
3M™ Safety-Walk™ General Purpose Tread 610, Black Tread, 6 in x 24 in, 50 per caseThis mineral-coated, slip-resistant material featrues a highly durable surface. Low-profile design reduces trip hazard.
3M™ Safety-Walk™ General Purpose Tread Black, 1 in x 60 ft, 4 per caseThis mineral-coated, slip-resistant material featrues a highly durable surface. Low-profile design reduces trip hazard.
3M™ Safety-Walk™ General Purpose Tread Black, 2 in x 60 ft, 2 per caseThis mineral-coated, slip-resistant material featrues a highly durable surface. Low-profile design reduces trip hazard.
Product Catalog for 3M Mining Site Safety Traffic Control Products
Printer-friendly format Vinyl Lane Marking Tape
[click to enlarge]
Vinyl film tape with a rubber adhesive, ideal for safety marking requirements. Available in a variety of sizes and colours.
Make a Selection
3M™ Vinyl Tape 471 Red, 3 in x 36 yd, 12 per case Bulk3M™ Vinyl Tape 471 Red, 5.2 mil (0.13 mm), vinyl backing with a rubber adhesive, maintain color even when exposed to heavy abrasion, conformable, maintain color throughout not printed, dead stretch properties to provide straighter lines, clean removal
3M™ Vinyl Tape 471 White, 1/2 in x 36 yd, 72 per case Bulk3M™ Vinyl Tape 471 White, 5.2 mil (0.13 mm), vinyl backing with a rubber adhesive, maintain color even when exposed to heavy abrasion, conformable, maintain color throughout not printed, dead stretch properties to provide straighter lines, clean remova
3M™ Vinyl Tape 471 Yellow, 1/2 in x 36 yd, 72 per case Bulk3M™ Vinyl Tape 471 Yellow, 5.2 mil (0.13 mm), vinyl backing with a rubber adhesive, maintain color even when exposed to heavy abrasion, conformable, maintain color throughout not printed, dead stretch properties to provide straighter lines, clean remov
http://products3.3m.com/catalog/ww/en001/mining/-/node_8...e_ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:16:48 AM
Select a Location
English
By Keyword
3M Global Mining : Eye Protection
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Worker Safety
Eye Protection
[click to enlarge]
Includes: Safety, protective and visitor eyewear.
Make a Selection
3M™ Protective Eyewear 1731, Blue Frame, Clear Lens 24/CaseStylish wrap around safety glasses. Comfortable fit with 4-position adjustable temple and vinyl nose pad. Shaped to fit facial contours.
3M™ Safety Goggles 1620/37102(AAD), Perforated 288/CaseMulti-purpose safety goggles with polycarbonate lens. Vinyl frames allow for excellent fit. Perforated for added ventilation and comfort. Do not use for protection against splash or dust hazards.
3M™ Visitor Specs 1611/37101(AAD), Clear 300/CaseAn economical alternative for short term eye protection. Can be worn alone or over prescription glasses. Polycarbonate Lens. Usually used by plant visitors.
Product Catalog for 3M Mining Worker Safety Eye Protection
Printer-friendly format 3M™ Protective Eyewear 1731, Blue Frame, Clear Lens 24/CaseStylish wrap around safety glasses. Comfortable fit with 4-position adjustable temple and vinyl nose pad. Shaped to fit facial contours.
3M Id : 70-0708-9176-0GTIN(UPC/EAN) : 5 00 51138 76807 7
PROTECTIVE EYEWEAR
3M™ Protective Eyewear Products help provide limited eye and face protection against flying particles. Misuse or failure to follow warnings and instructions may result in serious personal injury, including blindness, or death. For proper use, see supervisor, read instructions and warnings on the package, or call 3M Occupational Health and Environmental Safety Division (OH&ESD) Technical Service in the U.S.A. at 1-800-243-4630. In Canada, call 1-800-267-4414.
warning-web-10
Additional Information
Learn More . . .
Packaging Data
Eye and Face Protection - Fax on Demand (PDF 47.1 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
They meet the high impact requirements of the Standard for Occupational and Educational Eye and Face Protection ANSI Z87.1-2003.
Product Catalog for 3M Mining Worker Safety Eye Protection
Printer-friendly format 3M™ Safety Goggles 1620/37102(AAD), Perforated 288/Case
[click to enlarge]
Multi-purpose safety goggles with polycarbonate lens. Vinyl frames allow for excellent fit. Perforated for added ventilation and comfort. Do not use for protection against splash or dust hazards.
3M Id : 70-0708-9161-2GTIN(UPC/EAN) : 5 00 51131 37102 1
PROTECTIVE EYEWEAR
3M™ Protective Eyewear Products help provide limited eye and face protection against flying particles. Misuse or failure to follow warnings and instructions may result in serious personal injury, including blindness, or death. For proper use, see supervisor, read instructions and warnings on the package, or call 3M Occupational Health and Environmental Safety Division (OH&ESD) Technical Service in the U.S.A. at 1-800-243-4630. In Canada, call 1-800-267-4414.
warning-web-10
Additional Information
Learn More . . .
Packaging Data
Eye and Face Protection - Fax on Demand (PDF 47.1 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
These high impact safety goggles meet the requirements of the Standard for Occupational and Educational Eye and Face Protection ANSI Z87.1-2003.
Product Catalog for 3M Mining Worker Safety Eye Protection
Printer-friendly format 3M™ Visitor Specs 1611/37101(AAD), Clear 300/Case
[click to enlarge]
An economical alternative for short term eye protection. Can be worn alone or over prescription glasses. Polycarbonate Lens. Usually used by plant visitors.
3M Id : 70-0708-9160-4GTIN(UPC/EAN) : 5 00 51131 37101 4
Additional Information
Learn More . . .
Packaging Data
Eye and Face Protection - Fax on Demand (PDF 47.1 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Meet the requirements of the Standard for Occupational and Educational Eye and Face Protection ANSI Z87.1-2003.
http://products3.3m.com/catalog/ww/en001/mining/-/node_..._ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:17:26 AM
Select a Location
English
By Keyword
Email
3M Global Mining : Hearing Protection
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Worker Safety
Hearing Protection
[click to enlarge]
3M offers a wide variety of solutions to help reduce noise exposure. A full line of comfortable, easy-to-use hearing protectors, including ear plugs, ear muffs, and banded hearing protectors are available.
Make a Selection
3M™ Damping Foil 2552 Silver, 2 in x 36 yd 10.0 mil, 5 per case Bulk3M™ Damping Foil 2552 Silver, aluminum foil constraining layer coated with a pressure-sensitive viscoelastic polymer on a poly-coated paper easy-release liner.
Ear MuffsEasy to use ear muffs are comfortable for extended wear in moderate to high noise situations.
Ear PlugsFoam, banded, reusable and corded ear plugs.
Product Catalog for 3M Mining Worker Safety Hearing Protection
Printer-friendly format 3M™ Damping Foil 2552 Silver, 2 in x 36 yd 10.0 mil, 5 per case Bulk
[click to enlarge]
3M™ Damping Foil 2552 Silver, aluminum foil constraining layer coated with a pressure-sensitive viscoelastic polymer on a poly-coated paper easy-release liner.
3M Id : 70-0062-3078-6GTIN(UPC/EAN) : 0 00 21200 38395 3
Additional Information
Learn More . . .
Packaging Data
3M™ Damping Foil 2552 - Data Sheet (PDF 48.4 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Damping Foil Tape 2552 helps damp vibrations on metal and plastic surfaces vibrating at their natural (resonant) frequency, consists of a pressure-sensitive viscoelastic polymer and aluminum foil constraining layer that effectively converts vibrational energy to negligible heat to reducing irritating noises and decreasing wear and tear on parts. Optimal temperature range from 32°F to 140°F
Full Text . . .
Characteristics
Adhesive Material Viscoelastic polymerBacking Material Aluminum FoilLength 36 Linear Yard Primary Trademark Name 3M
Product Catalog for 3M Mining Worker Safety Hearing Protection
Printer-friendly format Ear Muffs
[click to enlarge]
Easy to use ear muffs are comfortable for extended wear in moderate to high noise situations.
Make a Selection
3M™ Ear Muff 1440 20/CaseLightweight, with a soft padded headband for extra comfort. Sliding tension adjustment system to help maintain a good fit. Recommended for moderately high noise situations (up to 95 dBA TWA).
3M™ General Purpose Ear Muff 1435 20/CaseDurable, lightweight, easy to use ear muffs are comfortable for extended wear. Recommended for moderately high noise situations (up to 95 dBA TWA).
3M™ Hard Hat Mounted Ear Muff 1450 20/CaseThese ear muffs can be attached to a wide variety of hard hats without additional adapters. Combines comfort and convenience. Recommended for moderately high noise situations (up to 95 dBA TWA).
Product Catalog for 3M Mining Worker Safety Hearing Protection
Printer-friendly format Ear Plugs
[click to enlarge]
Foam, banded, reusable and corded ear plugs.
Make a Selection
3M™ Banded Hearing Protector 1310 50/CaseGreat alternative for employees who need intermittent hearing protection.
3M™ Corded Foam Ear Plug 1110, 500/CaseThe comfortable fit of soft foam ear plugs with the convenience of a cord. Recommended for high noise situations (up to 100 dBA TWA).
3M™ Foam Ear Plug 1100, 1000/CaseSoft, comfortable and unobtrusive hearing protection. Recommended for high noise situations (up to 100dBA TWA).
3M™ Reusable Ear Plug 1260 500/CaseSoft, elastic reusable ear plugs that are premolded for easy insertion into the ear without rolling. The multi-flanged design helps keep the ear plug securely in the ear to help provide comfortable and reliable protection.
http://products3.3m.com/catalog/ww/en001/mining/-/node_..._ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:18:03 AM
Select a Location
English
By Keyword
3M Global Mining : Respiratory
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Worker Safety
Respiratory
[click to enlarge]
3M Respirators are lightweight, comfortable and easy to breathe through. Using expertise in filtration technologies and blown microfiber capabilities, 3M offers a family of respirators that meet workers needs for comfort and value.
Make a Selection
3M™ Vortex Cooling Assembly V-100/37018(AAD) 1/CaseThis assembly helps regulate the flow and temperature of the supplied air system. It helps keep the worker comfortable by cooling the air by up to 50°F (28°C). Includes the cooling tube, waist belt and holder.
Product Catalog for 3M Mining Worker Safety Respiratory
Printer-friendly format 3M™ Vortex Cooling Assembly V-100/37018(AAD) 1/Case
[click to enlarge]
This assembly helps regulate the flow and temperature of the supplied air system. It helps keep the worker comfortable by cooling the air by up to 50°F (28°C). Includes the cooling tube, waist belt and holder.
3M Id : 70-0707-9901-3GTIN(UPC/EAN) : 0 00 51131 37018 0
Additional Information
Learn More . . .
Packaging Data
V-Series Air Control Devices User - Instructions/Manual (PDF 135.7 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Acid Gas Cartridge 6002 60/CaseNIOSH approved against certain acid gases. Use with 3M™ Half and Full Facepieces 6000 Series and 3M™ Half and Full Facepieces 7000 Series with bayonet style cartridge holders.
3M™ Ammonia Methylamine Cartridge 6004 60/CaseNIOSH approved against ammonia and methylamine. Use with 3M™ Half and Full Facepieces 6000 Series and 3M™ Half and Full Facepieces 7000 Series with bayonet style cartridge holders.
3M™ Formaldehyde/Organic Vapor Cartridge 6005 60/CaseNIOSH approved against formaldehyde and certain organic vapors. Use with 3M™ Half and Full Facepieces 6000 Series and 3M™ Half and Full Facepieces 7000 Series with bayonet style cartridge holders.
3M™ Multi Gas/Vapor Cartridge 6006 60/CaseNIOSH approved against certain organic vapors, acid gases, ammonia, methylamine or formaldehyde. Use with 3M™ Half and Full Facepieces 6000 Series and 3M™ Half and Full Facepieces 7000 Series with bayonet style cartridge holders.
3M™ Organic Vapor Cartridge 6001 60/CaseNIOSH approved against certain organic vapors. Use with 3M™ Half and Full Facepieces 6000 Series and 3M™ Half and Full Facepieces 7000 Series with bayonet style cartridge holders.
3M™ Organic Vapor Cartridge GVP-401 6/CaseThis cartridge is used with the 3M™ Belt-Mounted and Vehicle-Mounted Powered Air Purifying Respirator (PAPR) Systems. It attaches to the motor blower and filters the air supplied to the headgear.
3M™ Organic Vapor/Acid Gas Cartridge 6003/07047(AAD) 60/CaseNIOSH approved against certain organic vapors or acid gases. Use with 3M™ Half and Full Facepieces 6000 Series and 3M™ Half and Full Facepieces 7000 Series with bayonet style cartridge holders.
3M™ Organic Vapor/Acid Gas Cartridge GVP-403 6/CaseThis cartridge is used with the 3M™ Belt-Mounted and Vehicle-Mounted Powered Air Purifying Respirator (PAPR) Systems. It attaches to the motor blower and filters the air supplied to the headgear.
http://products3.3m.com/catalog/ww/en001/mining/-/nod...w_globalmining_3_0/command_AbcPageHandler/output_html (1 of 2)22/11/2006 11:18:30 AM
Select a Location
English
By Keyword
3M Global Mining : Cartridges
3M™ Organic Vapor/Acid Gas/High Efficiency Cartridge GVP-443 6/CaseThis cartridge is used with the 3M™ Belt-Mounted and Vehicle-Mounted Powered Air Purifying Respirator (PAPR) Systems. It attaches to the motor blower and filters the air supplied to the headgear.
Product Catalog for 3M Mining Worker Safety Respiratory
Printer-friendly format Filters
[click to enlarge]
For use with 6000 and 7000 series respirators. Provides protection from solids, and liquid or oil based particles from sprays.
Make a Selection
3M™ High Efficiency Filter AS-140-5 5/CaseUsed on 3M™ Airstream™ High Efficiency Headgear System to help filter contaminants before the air reaches the workers breathing zone.
3M™ High Efficiency Filter GVP-440 8/CaseThis cartridge is used with the 3M™ Belt-Mounted and Vehicle-Mounted Powered Air Purifying Respirator (PAPR) Systems. It attaches to the motor blower and filters the air supplied to the headgear.
3M™ Particulate Filter 2091/07000(AAD), P100 100/CaseNIOSH approved for environments containing certain oil and non-oil based particles. Use with 3M™ Respirators 5000 Series or Cartridges 6000 Series with 3M™ Adapter 502, 3M™ Facepieces 6000 Series, or 3M™ Facepieces 7000 Series with bayonet filter holder.
3M™ Particulate Filter 2097/07184(AAD), P100, with Nuisance Level Organic Vapor Relief 100/CaseNIOSH approved for environments containing certain oil and non-oil based particles. 3M recommended for relief against of organic vapors and ozone protection up to 10 times OSHA PEL. Not NIOSH certified for use against ozone.
Product Catalog for 3M Mining Worker Safety Respiratory
Printer-friendly format Respirators
[click to enlarge]
Includes: Particulate, half and full facepiece, and PAPR respirators.
Make a Selection
3M™ Airstream™ Headgear-Mounted Powered Air Purifying Respirator (PAPR) System AS-400LBC, Intrinsically Safe 1/CaseThis system is lightweight and comfortable. No breathing tubes or hoses are required. Positive pressure helps keep out particles, and keep the faceshield fog-free.
Full Facpiece RespiratorUse with 3M™ Filters 2000 Series, 3M™ Filter 7093, P100, 3M™ Cartridges 6000 Series, or 3M™ Dual Airline Systems against a variety of gases, vapors and particulate hazards according to NIOSH approvals.
Half Facepiece RespiratorUse with 3M™ Filters 2000 Series, 3M™ Filter 7093, P100, 3M™ Cartridges 6000 Series, or 3M™ Dual Airline Systems against a variety of gases, vapors and particulate hazards according to NIOSH approvals.
Particulate RespiratorsUse 3M respirators to protect from dust and acid/gas particles and organic vapours.
http://products3.3m.com/catalog/ww/en001/mining/-/node_L...e_ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:18:45 AM
Select a Location
English
By Keyword
3M Global Mining : 3M Mining - Mexico Product Catalogue
3M Worldwide : Global : Mining
3M Mining - Mexico Product CatalogueThis Product Catalog has been created to offer a comprehensive view of products sold to our Mexican mining customers.Disclaimer:Not all products in this 3M Mining Mexico products catalog are available in all countries. Interested parties should contact their local 3M country representatives for product availability.
Make a Selection
Electrical SolutionsThis section contains products for the following groups: Cable cleaning products, cable locators, splices, terminations, tapes, heat tracers, jacketing products and lubricants. 3M has the solution for all your electrical needs.
Maintenance SolutionsFix it, Build it, Clean it - 3M Mining provides the abrasives, adhesives, tapes and cleaners to help your maintenance department keep your operations running efficiently.
Mining Specific3M Mining presents solutions specifically tailored to the needs of the mining and metals industry.
Site SafetySite Safety covers a wide range 3M Products, covering Fire Protection, Sorbents, Tapes and Safety-Walk™ products.
Worker SafetyLet 3M Mining help you provide the products required for worker safety at mining and industrial sites.
http://products3.3m.com/catalog/ww/en001/mining/-/node_G...almining_3_0/command_PackagingOutlinkHandler/output_html22/11/2006 11:19:20 AM
Select a Location
English
By Keyword
3M Global Mining : 3M™ Cloth Belt 761D, 3 in x 24 in P120 Y weight Filmlok, 5 per inner 25 per case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products
3M™ Cloth Belt 761D, 3 in x 24 in P120 Y weight Filmlok, 5 per inner 25 per case
[click to enlarge]
A Cubitron™ abrasive grain cloth belt constructed on a Y weight, strong, durable cloth backing. Resin bonded for heat resistance. Grade: P120. Primary markets: metalworking, woodworking.
3M Id : 60-4200-0883-5GTIN(UPC/EAN) : 0 00 51144 81414 5
Additional Information
Learn More . . .
PackagingData
For tough portable belt sanding jobs; features long-lasting, durable 3M™ Cubitron™ abrasive grain on a strong Y-weight backing. The closed coat feature provides a better finish and less aggressive cut than a comparable open coat abrasives of the same grade. The purple* color indicates it's leading edge technology designed to provide the lowest possible manufacturing costs. *The purple color
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products 3M™ Cloth Belt 761D, 3 in x
24 in P120 Y weight Filmlok, 5 per inner 25 per case
3M™ Cloth Belt 761D, 3 in x 24 in P120 Y weight Filmlok, 5 per inner 25 per case
Printer-friendly
format
Additional Information
For tough portable belt sanding jobs; features long-lasting, durable 3M™ Cubitron™ abrasive grain on a strong Y-weight backing. The closed coat feature provides a better finish and less aggressive cut than a comparable open coat abrasives of the same grade. The purple* color indicates it's leading edge technology designed to provide the lowest possible manufacturing costs. *The purple color is a trademark of 3M.
http://products3.3m.com/catalog/ww/en001/mining/-/node_G...almining_3_0/command_PackagingOutlinkHandler/output_html22/11/2006 11:20:16 AM
Select a Location
English
By Keyword
3M Global Mining : 3M™ Roloc™ Disc Pack 983S, 3 in, 5 packs per case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products
3M™ Roloc™ Disc Pack 983S, 3 in, 5 packs per case
[click to enlarge]
Convenient introductory pack includes 3 inch diameter Roloc™ surface conditioning discs, 3M coated abrasive discs and Roloc disc pad. An easy way to evaluate the right product, size and grade for your application.
3M Id : 60-9800-1882-8GTIN(UPC/EAN) : 0 00 51144 82900 2
http://products3.3m.com/catalog/ww/en001/mining/-/node_G...almining_3_0/command_PackagingOutlinkHandler/output_html22/11/2006 11:20:32 AM
Select a Location
English
By Keyword
3M Global Mining : 3M™ Twist-Lok™ Pad Holder 961, 10/case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products
3M™ Twist-Lok™ Pad Holder 961, 10/case
[click to enlarge]
Specially designed for use with 3M hand pads to make clean up jobs faster, easier, and safer. Distributes pressure evenly over pad surface for efficient cleaning action and improved pad life.
3M Id : 61-5000-4615-8GTIN(UPC/EAN) : 5 00 48011 09493 4
Additional Information
Learn More . . .
PackagingData
Characteristics
Color GrayHandle Color GrayHandle Material PlasticHeight 2.5 Inch Length 4.75 Inch Material PlasticPrimary Trademark Name 3M
http://products3.3m.com/catalog/ww/en001/mining/-/node_G...almining_3_0/command_PackagingOutlinkHandler/output_html22/11/2006 11:20:46 AM
Select a Location
English
By Keyword
3M Global Mining : Abrasive Flap Disc 747D
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products
Abrasive Flap Disc 747D
[click to enlarge]
A Cubitron™ abrasive grain abrasive flap disc constructed on a X weight, durable cloth backing. Resin bonded for heat resistance.
Make a Selection
3M™ Abrasive Flap Disc 747D, 4 1/2 in x 7/8 in 36 X weight, 10 per caseA Cubitron™ abrasive grain abrasive flap disc constructed on a X weight, durable cloth backing. Resin bonded for heat resistance. Features grinding aid for cooler grinding. Grade: 36. Primary market: metalworking.
3M™ Abrasive Flap Disc 747D, 4 1/2 in x 7/8 in 50 X weight, 10 per caseA Cubitron™ abrasive grain abrasive flap disc constructed on a X weight, durable cloth backing. Resin bonded for heat resistance. Features grinding aid for cooler grinding. Grade: 50. Primary market: metalworking.
3M™ Abrasive Flap Disc 747D, 4 1/2 in x 7/8 in 60 X weight, 10 per caseA Cubitron™ abrasive grain abrasive flap disc constructed on a X weight, durable cloth backing. Resin bonded for heat resistance. Features grinding aid for cooler grinding. Grade: 60. Primary market: metalworking.
3M™ Abrasive Flap Disc 747D, 7 in x 7/8 in 36 X weight, 5 per caseThe new standard for offhand grinding and finishing of metals. Angled for better surface coverage. Provides a consistent rate of cut for a superior finish and it provides long-life performance that improves quality and lowers cost. MOS: 8600
3M™ Abrasive Flap Disc 747D, 7 in x 7/8 in 50 X weight, 5 per caseThe new standard for off hand grinding and finishing of metals. Angled for better surface coverage. Provides a consistent rate of cut for a superior finish and it provides long-life performance that improves quality and lowers cost.
3M™ Abrasive Flap Disc 747D, 7 in x 7/8 in 80 X weight, 5 per caseThe new standard for off hand grinding and finishing of metals. Angled for better surface coverage. Provides a consistent rate of cut for a superior finish and it provides long-life performance that improves quality and lowers cost.
3M™ Abrasive Flap Disc 747D, 7 in x 7/8 in P120 X weight, 5 per caseThe new standard for off hand grinding and finishing of metals. Angled for better surface coverage. Provides a consistent rate of cut for a superior finish and it provides long-life performance that improves quality and lowers cost.
Printer-friendly format 3M™ Abrasive Flap Disc 747D, 4 1/2 in x 7/8 in 36 X weight, 10 per case
[click to enlarge]
A Cubitron™ abrasive grain abrasive flap disc constructed on a X weight, durable cloth backing. Resin bonded for heat resistance. Features grinding aid for cooler grinding. Grade: 36. Primary market: metalworking.
3M Id : 60-6500-3466-7GTIN(UPC/EAN) : 0 00 51111 49613 8
Additional Information
Learn More . . .
Packaging Data
3M™ Flap Disc Type 27 Illustration Line Art - Illustration/Line Art- (TIFF)
Characteristics
Abrasive Backing Type ClothAbrasive Backing Weight Y Weight
Abrasive Mineral Type Ceramic Aluminum OxidePrimary Trademark Name Cubitron
Printer-friendly format 3M™ Abrasive Flap Disc 747D, 4 1/2 in x 7/8 in 50 X weight, 10 per case
[click to enlarge]
A Cubitron™ abrasive grain abrasive flap disc constructed on a X weight, durable cloth backing. Resin bonded for heat resistance. Features grinding aid for cooler grinding. Grade: 50. Primary market: metalworking.
3M Id : 60-6500-3467-5GTIN(UPC/EAN) : 0 00 51111 49614 5
Additional Information
Learn More . . .
Packaging Data
3M™ Flap Disc Type 27 Illustration Line Art - Illustration/Line Art- (TIFF)
Characteristics
Abrasive Backing Type ClothAbrasive Backing Weight X Weight
Abrasive Mineral Type Ceramic Aluminum OxidePrimary Trademark Name Cubitron
Printer-friendly format 3M™ Abrasive Flap Disc 747D, 4 1/2 in x 7/8 in 60 X weight, 10 per case
[click to enlarge]
A Cubitron™ abrasive grain abrasive flap disc constructed on a X weight, durable cloth backing. Resin bonded for heat resistance. Features grinding aid for cooler grinding. Grade: 60. Primary market: metalworking.
3M Id : 60-6500-3468-3GTIN(UPC/EAN) : 0 00 51111 49615 2
Additional Information
Learn More . . .
Packaging Data
3M™ Flap Disc Type 27 Illustration Line Art - Illustration/Line Art- (TIFF)
Characteristics
Abrasive Backing Type ClothAbrasive Backing Weight X Weight
Abrasive Mineral Type Ceramic Aluminum OxidePrimary Trademark Name Cubitron
Printer-friendly format 3M™ Abrasive Flap Disc 747D, 7 in x 7/8 in 36 X weight, 5 per case
[click to enlarge]
The new standard for offhand grinding and finishing of metals. Angled for better surface coverage. Provides a consistent rate of cut for a superior finish and it provides long-life performance that improves quality and lowers cost. MOS: 8600
3M Id : 60-6500-3346-1GTIN(UPC/EAN) : 0 00 51111 49608 4
Additional Information
Learn More . . .
Packaging Data
3M™ Flap Disc Type 27 Illustration Line Art - Illustration/Line Art- (TIFF)
Characteristics
Abrasive Backing Type ClothAbrasive Backing Weight Y Weight
Abrasive Mineral Type Ceramic Aluminum OxidePrimary Trademark Name Cubitron
Printer-friendly format 3M™ Abrasive Flap Disc 747D, 7 in x 7/8 in 50 X weight, 5 per case
[click to enlarge]
The new standard for off hand grinding and finishing of metals. Angled for better surface coverage. Provides a consistent rate of cut for a superior finish and it provides long-life performance that improves quality and lowers cost.
3M Id : 60-6500-3347-9GTIN(UPC/EAN) : 0 00 51111 49609 1
Additional Information
Learn More . . .
Packaging Data
3M™ Flap Disc Type 27 Illustration Line Art - Illustration/Line Art- (TIFF)
Characteristics
Abrasive Backing Type ClothAbrasive Backing Weight X Weight
Abrasive Mineral Type Ceramic Aluminum OxidePrimary Trademark Name Cubitron
Printer-friendly format 3M™ Abrasive Flap Disc 747D, 7 in x 7/8 in 80 X weight, 5 per case
[click to enlarge]
The new standard for off hand grinding and finishing of metals. Angled for better surface coverage. Provides a consistent rate of cut for a superior finish and it provides long-life performance that improves quality and lowers cost.
3M Id : 60-6500-3349-5GTIN(UPC/EAN) : 0 00 51111 49611 4
Additional Information
Learn More . . .
Packaging Data
3M™ Flap Disc Type 27 Illustration Line Art - Illustration/Line Art- (TIFF)
Characteristics
Abrasive Backing Type ClothAbrasive Backing Weight X Weight
Abrasive Mineral Type Ceramic Aluminum OxidePrimary Trademark Name Cubitron
Printer-friendly format 3M™ Abrasive Flap Disc 747D, 7 in x 7/8 in P120 X weight, 5 per case
[click to enlarge]
The new standard for off hand grinding and finishing of metals. Angled for better surface coverage. Provides a consistent rate of cut for a superior finish and it provides long-life performance that improves quality and lowers cost.
3M Id : 60-6500-3350-3GTIN(UPC/EAN) : 0 00 51111 49612 1
Additional Information
Learn More . . .
Packaging Data
3M™ Flap Disc Type 27 Illustration Line Art - Illustration/Line Art- (TIFF)
Characteristics
Abrasive Backing Type ClothAbrasive Backing Weight X Weight
Abrasive Mineral Type Ceramic Aluminum OxidePrimary Trademark Name Cubitron
http://products3.3m.com/catalog/ww/en001/mining/-/node_..._ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:21:59 AM
Select a Location
English
By Keyword
3M Global Mining : Fiber Discs
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products
Fiber Discs
[click to enlarge]
General purpose discs for a variety of grinding and removal jobs.
Make a Selection
3M™ Fibre Disc 381C, 7 in x 7/8 in 60, 25 per inner, 100 per case, ObsoleteAn aluminum oxide disc constructed on a fibre backing. Grade: 60. Primary market: metalworking.
3M™ Fibre Type C Disc 281C, 4 in x 5/8 in Die# 400FF 80, 25 per case BoxedAn aluminum oxide disc constructed on a fibre backing. Grade: 80. Primary market: metalworking.
3M™ Fibre Type C Disc 281C, 5 in x 7/8 in Die# 500P 100, 25 per case Boxed, ObsoleteAn aluminum oxide disc constructed on a fibre backing. Grade: 100. Primary market: metalworking.
3M™ Fibre Type C Disc 281C, 7 in x 7/8 in Die# 700BB 24, 25 per case Boxed, ObsoleteAn aluminum oxide disc constructed on a fibre backing. Grade: 24. Primary market: metalworking.
3M™ Fibre Type C Disc 281C, 7 in x 7/8 in Die# 700BB 36, 25 per case Boxed, ObsoleteAn aluminum oxide disc constructed on a fibre backing. Grade: 36. Primary market: metalworking.
3M™ Fibre Type C Disc 281C, 7 in x 7/8 in Die# 700BB 50, 25 per case Boxed, ObsoleteAn aluminum oxide disc constructed on a fibre backing. Grade: 50. Primary market: metalworking.
3M™ Fibre Type C Disc 281C, 7 in x 7/8 in Die# 700BB 60, 25 per case Boxed, ObsoleteAn aluminum oxide disc constructed on a fibre backing. Grade: 60. Primary market: metalworking.
3M™ Fibre Type C Disc 281C, 7 in x 7/8 in Die# 700BB 80, 25 per case Boxed, ObsoleteAn aluminum oxide disc constructed on a fibre backing. Grade: 80. Primary market: metalworking.
3M™ Fibre Type C Disc 281C, 7 in x 7/8 in Die# 700BB 100, 25 per case Boxed, ObsoleteAn aluminum oxide disc constructed on a fibre backing. Grade: 100. Primary market: metalworking.
3M™ Fibre Type C Disc 281C, 7 in x 7/8 in Die# 700BB 120, 25 per case Boxed, ObsoleteAn aluminum oxide disc constructed on a fibre backing. Grade: 120. Primary market: metalworking.
http://products3.3m.com/catalog/ww/en001/mining/-/nod..._globalmining_3_0/command_AbcPageHandler/output_print (1 of 2)22/11/2006 11:22:09 AM
Select a Location
English
3M Global Mining : Fiber Discs
3M™ Fibre Type C Type XY Disc 381C, 7 in x 7/8 in Die# 700BB 24, 100 per case Boxed, ObsoleteAn aluminum oxide disc constructed on a fibre backing. Grade: 24. Primary market: metalworking.
3M™ Fibre Type C Type XY Disc 381C, 7 in x 7/8 in Die# 700BB 36, 100 per case Boxed, ObsoleteAn aluminum oxide disc constructed on a fibre backing. Grade: 36. Primary market: metalworking.
3M™ Fibre Type C Type XY Disc 381C, 7 in x 7/8 in Die# 700BB 80, 25 per inner 100 per case Boxed, ObsoleteAn aluminum oxide disc constructed on a fibre backing. Grade: 80. Primary market: metalworking.
Printer-friendly format 3M™ Fibre Disc 381C, 7 in x 7/8 in 60, 25 per inner, 100 per case, ObsoleteAn aluminum oxide disc constructed on a fibre backing. Grade: 60. Primary market: metalworking.
3M Id : 60-6700-0063-1GTIN(UPC/EAN) : 0 00 51144 01741 6
Additional Information
Learn More . . .
PackagingData
Characteristics
Abrasive Backing Type FibreAbrasive Mineral Type Aluminum OxideANSI Grade 60Color RedPrimary Trademark Name 3M
Printer-friendly format 3M™ Fibre Type C Type XY Disc 381C, 7 in x 7/8 in Die# 700BB 24, 100 per case Boxed, ObsoleteAn aluminum oxide disc constructed on a fibre backing. Grade: 24. Primary market: metalworking.
3M Id : 60-6800-0595-0GTIN(UPC/EAN) : 0 00 51144 81370 4
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Characteristics
Abrasive Backing Type FibreAbrasive Mineral Type Aluminum OxideANSI Grade 24Color RedPrimary Trademark Name 3M
Printer-friendly format 3M™ Fibre Type C Type XY Disc 381C, 7 in x 7/8 in Die# 700BB 36, 100 per case Boxed, ObsoleteAn aluminum oxide disc constructed on a fibre backing. Grade: 36. Primary market: metalworking.
3M Id : 60-6800-0598-4GTIN(UPC/EAN) : 0 00 51144 81373 5
Additional Information
Learn More . . .
PackagingData
Characteristics
Abrasive Backing Type FibreAbrasive Mineral Type Aluminum OxideANSI Grade 36Color RedPrimary Trademark Name 3M
Printer-friendly format 3M™ Fibre Type C Type XY Disc 381C, 7 in x 7/8 in Die# 700BB 80, 25 per inner 100 per case Boxed, ObsoleteAn aluminum oxide disc constructed on a fibre backing. Grade: 80. Primary market: metalworking.
3M Id : 60-6700-0068-0GTIN(UPC/EAN) : 0 00 51144 01740 9
Additional Information
Learn More . . .
PackagingData
Characteristics
Abrasive Backing Type FibreAbrasive Mineral Type Aluminum OxideANSI Grade 80Color RedPrimary Trademark Name 3M
http://products3.3m.com/catalog/ww/en001/mining/-/node_..._ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:24:14 AM
Select a Location
English
By Keyword
3M Global Mining : Green Corps™ Wheels
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products
Green Corps™ Wheels
[click to
enlarge]
Wheel is designed to provide high cut rates and long life on most all materials including fiberglass, stainless steel, mild steel and aerospace alloys. Ideal for use on a wide variety of utility type cut-off tools.
Make a Selection
3M™ Green Corps™ Cut-Off Wheel, 01989, 3 in x 1/32 in x 3/8 in, 5 wheels per pack 10 packs per case3Ms highest performing, longest lasting wheel used for cutting sheet metal, frame rails, clamps and rusted bolts. Constructed with premium grade abrasives, these wheels out-cut and out-last General Purpose wheels.
3M™ Green Corps™ Cut-Off Wheel, 01990, 3 in x 1/16 in x 3/8 in, 5 wheels per pack 10 packs per case3Ms highest performing, longest lasting wheel used for cutting sheet metal, frame rails, clamps and rusted bolts. Constructed with premium grade abrasives, these wheels out-cut and out-last General Purpose wheels.
3M™ Green Corps™ Reinforced Weld Grinding Wheel, 01991, 3 in x 3/16 in x 3/8 in, 5 wheels per pack 10 packs per caseIdeal for cutting spot welds and grinding hard-to-reach places. Best in class construction. DO NOT USE ON TOOL WITHOUT GUARDS.
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products Green Corps™ Wheels
Printer-friendly format 3M™ Green Corps™ Cut-Off Wheel, 01989, 3 in x 1/32 in x 3/8 in, 5 wheels per pack 10 packs per case
[click to enlarge]
3Ms highest performing, longest lasting wheel used for cutting sheet metal, frame rails, clamps and rusted bolts. Constructed with premium grade abrasives, these wheels out-cut and out-last General Purpose wheels.
3M Id : 60-9800-2880-1GTIN(UPC/EAN) : 0 00 51131 01989 8
Additional Information
Learn More . . .
PackagingData
Characteristics
Center Hole Diameter 3/8 Inch Color GreenDiameter 3 Inch Primary Trademark Name Green Corps
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products Green Corps™ Wheels
Printer-friendly format 3M™ Green Corps™ Cut-Off Wheel, 01990, 3 in x 1/16 in x 3/8 in, 5 wheels per pack 10 packs per case
[click to enlarge]
3Ms highest performing, longest lasting wheel used for cutting sheet metal, frame rails, clamps and rusted bolts. Constructed with premium grade abrasives, these wheels out-cut and out-last General Purpose wheels.
3M Id : 60-9800-2881-9GTIN(UPC/EAN) : 0 00 51131 01990 4
Additional Information
Learn More . . .
PackagingData
Characteristics
Center Hole Diameter 3/8 Inch Color GreenDiameter 3 Inch Primary Trademark Name Green Corps
http://products3.3m.com/catalog/ww/en001/mining/-/node_..._ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:24:44 AM
Select a Location
English
By Keyword
Email
3M Global Mining : Radial Bristle Discs
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products
Radial Bristle Discs
[click to
enlarge]
Durable radial plastic disc for thin coating removal.
Make a Selection
Scotch-Brite™ Radial Bristle Disc, 3 in x 3/8 in 50, 40 per caseDurable radial plastic disc for deburring or coating removal. Leaves a coarse satin finish. Gang multiple discs to form a brush. Fits portable hand tool or small bench motor. Abrasive mineral: 50 grade Cubitron™ grain. Color: Green MOS: 25000 RPM
Scotch-Brite™ Radial Bristle Disc, 3 in x 3/8 in 80, 40 per caseDurable radial plastic disc for deburring or coating removal. Leaves a satin finish. Gang multiple discs to form a brush. Fits portable hand tool or small bench motor. Abrasive mineral: 80 grade Cubitron™ grain. Color: Yellow MOS: 25000 RPM
Scotch-Brite™ Radial Bristle Disc, 3 in x 3/8 in 120, 10 per inner 40 per caseDurable radial plastic disc for thin coating removal. Leaves a fine satin finish. Gang multiple discs to form a brush. Fits portable hand tool or small bench motor. Abrasive mineral: 120 grade Cubitron™ grain. Color: White MOS: 25000 RPM
Printer-friendly format Scotch-Brite™ Radial Bristle Disc, 3 in x 3/8 in 50, 40 per case
[click to enlarge]
Durable radial plastic disc for deburring or coating removal. Leaves a coarse satin finish. Gang multiple discs to form a brush. Fits portable hand tool or small bench motor. Abrasive mineral: 50 grade Cubitron™ grain. Color: Green MOS: 25000 RPM
3M Id : 61-5001-3939-1GTIN(UPC/EAN) : 0 00 48011 24279 8
Printer-friendly format Scotch-Brite™ Radial Bristle Disc, 3 in x 3/8 in 80, 40 per case
[click to enlarge]
Durable radial plastic disc for deburring or coating removal. Leaves a satin finish. Gang multiple discs to form a brush. Fits portable hand tool or small bench motor. Abrasive mineral: 80 grade Cubitron™ grain. Color: Yellow MOS: 25000 RPM
3M Id : 61-5001-3940-9GTIN(UPC/EAN) : 0 00 48011 24280 4
Printer-friendly format Scotch-Brite™ Radial Bristle Disc, 3 in x 3/8 in 120, 10 per inner 40 per case
[click to enlarge]
Durable radial plastic disc for thin coating removal. Leaves a fine satin finish. Gang multiple discs to form a brush. Fits portable hand tool or small bench motor. Abrasive mineral: 120 grade Cubitron™ grain. Color: White MOS: 25000 RPM
3M Id : 61-5001-3941-7GTIN(UPC/EAN) : 0 00 48011 24281 1
Additional Information
Learn More . . .
PackagingData
Characteristics
ANSI Grade 120Diameter 3 Inch Primary Trademark Name Scotch-Brite
http://products3.3m.com/catalog/ww/en001/mining/-/node_..._ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:25:25 AM
Select a Location
English
By Keyword
3M Global Mining : Scotch-Brite EXL Deburring Wheel
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products
Scotch-Brite EXL Deburring Wheel
[click to enlarge]
High performance and durability for deburring and finishing applications.
Make a Selection
Scotch-Brite™ EXL Deburring Wheel, 6 in x 1 in x 1 in 8A MED, 3 per caseHigh performance and durability for deburring and finishing applications. Convolutely wound on a core. Hard, long lasting 8 density. Abrasive mineral: Medium grade aluminum oxide. Color: Gray MOS: 6000 RPM
Scotch-Brite™ EXL Deburring Wheel, 6 in x 1 in x 1 in 9S FIN, 3 per caseHigh performance and durability for deburring and finishing applications. Convolutely wound on a core. Hard, durable 9 density. Abrasive mineral: Fine grade silicon carbide. Color: Gray MOS: 6000 RPM
Printer-friendly format Scotch-Brite™ EXL Deburring Wheel, 6 in x 1 in x 1 in 8A MED, 3 per case
[click to enlarge]
High performance and durability for deburring and finishing applications. Convolutely wound on a core. Hard, long lasting 8 density. Abrasive mineral: Medium grade aluminum oxide. Color: Gray MOS: 6000 RPM
3M Id : 61-5001-2658-8GTIN(UPC/EAN) : 0 00 48011 13617 2
Printer-friendly format Scotch-Brite™ EXL Deburring Wheel, 6 in x 1 in x 1 in 9S FIN, 3 per case
[click to enlarge]
High performance and durability for deburring and finishing applications. Convolutely wound on a core. Hard, durable 9 density. Abrasive mineral: Fine grade silicon carbide. Color: Gray MOS: 6000 RPM
3M Id : 61-5001-2678-6GTIN(UPC/EAN) : 0 00 48011 05132 1
http://products3.3m.com/catalog/ww/en001/mining/-/node_..._ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:25:50 AM
Select a Location
English
By Keyword
Email
3M Global Mining : Scotch-Brite Multi-Flex Abrasive Sheet Rolls
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products
Scotch-Brite Multi-Flex Abrasive Sheet Rolls
[click to enlarge]
Ultra flexible and conformable for cleaning or fine finishing.
Make a Selection
Scotch-Brite™ Multi-Flex Abrasive Sheet Roll, 8 in x 20 ft A VFN, 60 per roll, 4 rolls per caseUltra flexible and conformable for cleaning or fine finishing. Convenient dispenser saves time and eliminates waste. Replaces steel wool to eliminate contamination. Abrasive mineral: Very fine grade aluminum oxide. Color: Maroon
Scotch-Brite™ Multi-Flex Abrasive Sheet Roll, 8 in x 20 ft S ULF, 60 per roll 4 rolls per caseUltra flexible and conformable for cleaning or fine finishing. Convenient dispenser saves time and eliminates waste. Replaces steel wool to eliminate contamination. Abrasive mineral: Ultra fine grade silcon carbide. Color: Gray
Printer-friendly format Scotch-Brite™ Multi-Flex Abrasive Sheet Roll, 8 in x 20 ft A VFN, 60 per roll, 4 rolls per case
[click to enlarge]
Ultra flexible and conformable for cleaning or fine finishing. Convenient dispenser saves time and eliminates waste. Replaces steel wool to eliminate contamination. Abrasive mineral: Very fine grade aluminum oxide. Color: Maroon
3M Id : 61-5001-2924-4GTIN(UPC/EAN) : 0 00 51131 07521 4
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Scotch-Brite™ Multiflex sheets work quickly and economically in sealer sanding, denibbing, defuzzing, highlighting and top coat finishing applications (both solvent- and water-based). Extremely ""scrunchable."" Can be folded, stacked, or rolled to accommodate application needs. For very fine finish applications.
Characteristics
Abrasive Mineral Type Aluminum OxideColor MaroonPrimary Trademark Name Scotch-Brite
Printer-friendly format Scotch-Brite™ Multi-Flex Abrasive Sheet Roll, 8 in x 20 ft S ULF, 60 per roll 4 rolls per case
[click to enlarge]
Ultra flexible and conformable for cleaning or fine finishing. Convenient dispenser saves time and eliminates waste. Replaces steel wool to eliminate contamination. Abrasive mineral: Ultra fine grade silcon carbide. Color: Gray
3M Id : 61-5001-3442-6GTIN(UPC/EAN) : 0 00 51131 07522 1
Additional Information
Learn More . . .
PackagingData
Scotch-Brite™ Multiflex sheets work quickly and economically in sealer sanding, denibbing, defuzzing, highlighting and top coat finishing applications (both solvent- and water-based). Extremely ""scrunchable."" Can be folded, stacked, or rolled to accommodate application needs. For ultra fine finish applications.
Characteristics
Abrasive Mineral Type Silicon CarbidePrimary Trademark Name Scotch-Brite
http://products3.3m.com/catalog/ww/en001/mining/-/node_..._ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:26:15 AM
Select a Location
English
By Keyword
3M Global Mining : Scotch-Brite™ and Roloc™ Bristle Discs
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products
Scotch-Brite™ and Roloc™ Bristle Discs
[click to enlarge]
Bristle technology provides a uniform concentration of mineral throughout the flexible abrasive filled bristles.
Make a Selection
Scotch-Brite™ Bristle Disc, 4 1/2 in 50, 10 per caseBrush-like bristle disc removes coarse coatings from the large, open areas of a work-piece. Works on right angle tools quickly and easily with little or no pressure.
Scotch-Brite™ Bristle Disc, 4 1/2 in 120, 10 per caseBrush-like bristle disc removes coarse coatings from the large, open areas of a work-piece. Works on right angle tools quickly and easily with little or no pressure.
Scotch-Brite™ Roloc™ Bristle Disc, 2 in x 5/8 Tapered 50, 40 per caseDisc is a molded, abrasive filled bristle disc instead of wire brushes for automotive use on aluminum and metal. Use for deburring, blending, finishing, polishing, cleaning and for coating, defect, scratch and rust removal.
Scotch-Brite™ Roloc™ Bristle Disc, 2 in x 5/8 Tapered 120, 40 per caseDisc is a molded, abrasive filled bristle disc instead of wire brushes for automotive use on aluminum and metal. Use for deburring, blending, finishing, polishing, cleaning and for coating, defect, scratch and rust removal.
Scotch-Brite™ Roloc™ Bristle Disc, 3 in x 5/8 Tapered 50, 40 per caseDisc is a molded, abrasive filled bristle disc instead of wire brushes for automotive use on aluminum and metal. Use for deburring, blending, finishing, polishing, cleaning and for coating, defect, scratch and rust removal.
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products Scotch-Brite™ and Roloc™
Bristle Discs
Printer-friendly format Scotch-Brite™ Bristle Disc, 4 1/2 in 50, 10 per case
[click to enlarge]
Brush-like bristle disc removes coarse coatings from the large, open areas of a work-piece. Works on right angle tools quickly and easily with little or no pressure.
3M Id : 61-5001-3901-1GTIN(UPC/EAN) : 0 00 48011 24241 5
Additional Information
Learn More . . .
PackagingData
Characteristics
Boxes per Case 2Color GreenMaximum Operating Speed 12000
Mineral Grade 50Primary Trademark Name Scotch-BriteSize 4-1/2 in.Units per Box 5
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products Scotch-Brite™ and Roloc™
Bristle Discs
Printer-friendly format Scotch-Brite™ Bristle Disc, 4 1/2 in 120, 10 per case
[click to enlarge]
Brush-like bristle disc removes coarse coatings from the large, open areas of a work-piece. Works on right angle tools quickly and easily with little or no pressure.
3M Id : 61-5001-3903-7GTIN(UPC/EAN) : 0 00 48011 24243 9
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products Scotch-Brite™ and Roloc™
Bristle Discs
Printer-friendly format Scotch-Brite™ Roloc™ Bristle Disc, 2 in x 5/8 Tapered 50, 40 per case
[click to enlarge]
Disc is a molded, abrasive filled bristle disc instead of wire brushes for automotive use on aluminum and metal. Use for deburring, blending, finishing, polishing, cleaning and for coating, defect, scratch and rust removal.
3M Id : 61-5001-3215-6GTIN(UPC/EAN) : 0 00 48011 18730 3
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products Scotch-Brite™ and Roloc™
Bristle Discs
Printer-friendly format Scotch-Brite™ Roloc™ Bristle Disc, 2 in x 5/8 Tapered 120, 40 per case
[click to enlarge]
Disc is a molded, abrasive filled bristle disc instead of wire brushes for automotive use on aluminum and metal. Use for deburring, blending, finishing, polishing, cleaning and for coating, defect, scratch and rust removal.
3M Id : 61-5001-3218-0GTIN(UPC/EAN) : 0 00 48011 18733 4
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products Scotch-Brite™ and Roloc™
Bristle Discs
Printer-friendly format Scotch-Brite™ Roloc™ Bristle Disc, 3 in x 5/8 Tapered 50, 40 per case
[click to enlarge]
Disc is a molded, abrasive filled bristle disc instead of wire brushes for automotive use on aluminum and metal. Use for deburring, blending, finishing, polishing, cleaning and for coating, defect, scratch and rust removal.
3M Id : 61-5001-3219-8GTIN(UPC/EAN) : 0 00 48011 18734 1
http://products3.3m.com/catalog/ww/en001/mining/-/node_..._ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:27:03 AM
Select a Location
English
By Keyword
Email
Email
3M Global Mining : Scotch-Brite™ Clean and Strip Disc, 6 in x 1/2 in S XCS, 15 per case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products
Scotch-Brite™ Clean and Strip Disc, 6 in x 1/2 in S XCS, 15 per case
[click to enlarge]
Aggressive, open-web disc for cleaning welds, removing rust and paint. May be mounted on a straight shaft tool or bench motor. Abrasive mineral: Extra coarse grade silicon carbide. Color: Black MOS: 4000 RPM
3M Id : 61-5001-2072-2GTIN(UPC/EAN) : 0 00 48011 00948 3
Additional Information
Learn More . . .
PackagingData
Stripping paint from metal surfaces ,inspecting welds,removing coatings and preparing surface for recoating
Characteristics
Abrasive Mineral Type Silicon CarbideColor BlackPrimary Trademark Name Scotch-Brite
http://products3.3m.com/catalog/ww/en001/mining/-/node_G...almining_3_0/command_PackagingOutlinkHandler/output_html22/11/2006 11:27:22 AM
Select a Location
English
By Keyword
3M Global Mining : Scotch-Brite™ Coating Removal Disc, 4 1/2 in x NH S XCS Bulk, 40 per case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products
Scotch-Brite™ Coating Removal Disc, 4 1/2 in x NH S XCS Bulk, 40 per case
[click to enlarge]
Heavy duty, semi-open web used to clean rust and paint. Contains a backing that mounts to hook and loop pads. Abrasive mineral: Extra Coarse grade silicon carbide. Color: Black MOS: 12000 RPM
3M Id : 61-5001-2342-9GTIN(UPC/EAN) : 0 00 48011 18482 1
Additional Information
Learn More . . .
PackagingData
Characteristics
Abrasive Mineral Type Silicon CarbidePrimary Trademark Name Scotch-Brite
A non-woven abrasive product used for cleaning, finishing, blending and deburring applications.
Make a Selection
Scotch-Brite™ Roloc™ Surface Conditioning Disc TR, 2 in x NH A CRS, 50 per inner 200 per caseA non-woven abrasive product used for cleaning, finishing, blending and deburring applications. A threaded attachment system secures the disc to the holder. Abrasive mineral: Coarse grade aluminum oxide. Color: Brown MOS: 25000 RPM
Scotch-Brite™ Roloc™ Surface Conditioning Disc TR, 2 in x NH A MED, 50 per inner 200 per caseA non-woven abrasive product used for cleaning, finishing, blending and deburring applications. A threaded attachment system secures the disc to the holder. Abrasive mineral: Medium grade aluminum oxide. Color: Maroon MOS: 25000 RPM
Scotch-Brite™ Roloc™ Surface Conditioning Disc TR, 2 in x NH A VFN, 50 per inner 200 per caseA non-woven abrasive product used for cleaning, finishing, blending and deburring applications. A threaded attachment system secures the disc to the holder. Abrasive mineral: Very fine grade aluminum oxide. Color: Blue MOS: 25000 RPM
Scotch-Brite™ Roloc™ Surface Conditioning Disc TR, 3 in x NH A CRS, 25 per inner 100 per caseA non-woven abrasive product used for cleaning, finishing, blending and deburring applications. A threaded attachment system secures the disc to the holder. Abrasive mineral: Coarse grade aluminum oxide. Color: Brown MOS: 18000 RPM
Scotch-Brite™ Roloc™ Surface Conditioning Disc TR, 3 in x NH A MED, 25 per inner 100 per caseA non-woven abrasive product used for cleaning, finishing, blending and deburring applications. A threaded attachment system secures the disc to the holder. Abrasive mineral: Medium grade aluminum oxide. Color: Maroon MOS: 18000 RPM
Scotch-Brite™ Roloc™ Surface Conditioning Disc TR, 3 in x NH A VFN, 25 per inner 100 per caseA non-woven abrasive product used for cleaning, finishing, blending and deburring applications. A threaded attachment system secures the disc to the holder. Abrasive mineral: Very fine grade aluminum oxide. Color: Blue MOS: 18000 RPM
Printer-friendly format Scotch-Brite™ Roloc™ Surface Conditioning Disc TR, 2 in x NH A CRS, 50 per inner 200 per case
[click to enlarge]
A non-woven abrasive product used for cleaning, finishing, blending and deburring applications. A threaded attachment system secures the disc to the holder. Abrasive mineral: Coarse grade aluminum oxide. Color: Brown MOS: 25000 RPM
3M Id : 61-5001-4173-6GTIN(UPC/EAN) : 0 00 48011 05528 2
Printer-friendly format Scotch-Brite™ Roloc™ Surface Conditioning Disc TR, 2 in x NH A MED, 50 per inner 200 per case
[click to enlarge]
A non-woven abrasive product used for cleaning, finishing, blending and deburring applications. A threaded attachment system secures the disc to the holder. Abrasive mineral: Medium grade aluminum oxide. Color: Maroon MOS: 25000 RPM
3M Id : 61-5001-4172-8GTIN(UPC/EAN) : 0 00 48011 05527 5
Printer-friendly format Scotch-Brite™ Roloc™ Surface Conditioning Disc TR, 2 in x NH A VFN, 50 per inner 200 per case
[click to enlarge]
A non-woven abrasive product used for cleaning, finishing, blending and deburring applications. A threaded attachment system secures the disc to the holder. Abrasive mineral: Very fine grade aluminum oxide. Color: Blue MOS: 25000 RPM
3M Id : 61-5001-4171-0GTIN(UPC/EAN) : 0 00 48011 05523 7
Printer-friendly format Scotch-Brite™ Roloc™ Surface Conditioning Disc TR, 3 in x NH A CRS, 25 per inner 100 per case
[click to enlarge]
A non-woven abrasive product used for cleaning, finishing, blending and deburring applications. A threaded attachment system secures the disc to the holder. Abrasive mineral: Coarse grade aluminum oxide. Color: Brown MOS: 18000 RPM
3M Id : 61-5001-4180-1GTIN(UPC/EAN) : 0 00 48011 05532 9
Printer-friendly format Scotch-Brite™ Roloc™ Surface Conditioning Disc TR, 3 in x NH A MED, 25 per inner 100 per case
[click to enlarge]
A non-woven abrasive product used for cleaning, finishing, blending and deburring applications. A threaded attachment system secures the disc to the holder. Abrasive mineral: Medium grade aluminum oxide. Color: Maroon MOS: 18000 RPM
3M Id : 61-5001-4179-3GTIN(UPC/EAN) : 0 00 48011 05531 2
Printer-friendly format Scotch-Brite™ Roloc™ Surface Conditioning Disc TR, 3 in x NH A VFN, 25 per inner 100 per case
[click to enlarge]
A non-woven abrasive product used for cleaning, finishing, blending and deburring applications. A threaded attachment system secures the disc to the holder. Abrasive mineral: Very fine grade aluminum oxide. Color: Blue MOS: 18000 RPM
3M Id : 61-5001-4178-5GTIN(UPC/EAN) : 0 00 48011 05530 5
http://products3.3m.com/catalog/ww/en001/mining/-/node_..._ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:28:39 AM
Select a Location
English
By Keyword
3M Global Mining : Scotch-Brite™ Surface Conditioning Discs
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products
Scotch-Brite™ Surface Conditioning Discs
[click to enlarge]
A non-woven abrasive product used for cleaning, finishing, blending and deburring applications. Contains a backing that mounts to hook and loop pads.
Make a Selection
Scotch-Brite™ Surface Conditioning Disc Pack 917S, 7 in, 1 per inner 5 per caseIntroductory pack containing a variety of grades of 7 inch non-woven surface conditioning discs. Used for cleaning, finishing, blending and deburring applications. Also includes 917 disc pad holder. MOS: 6000 RPM
Scotch-Brite™ Surface Conditioning Disc, 2 in x NH A CRS, 200 per caseA non-woven abrasive product used for cleaning, finishing, blending and deburring applications. Contains a backing that mounts to hook and loop pads. Abrasive mineral: Coarse grade aluminum oxide. Color: Brown MOS: 23000 RPM
Scotch-Brite™ Surface Conditioning Disc, 2 in x NH A VFN, 200 per caseA non-woven abrasive product used for cleaning, finishing, blending and deburring applications. Contains a backing that mounts to hook and loop pads. Abrasive mineral: Very fine grade aluminum oxide. Color: Blue MOS: 23000 RPM
Scotch-Brite™ Surface Conditioning Disc, 7 in x NH A MED, 25 per caseA non-woven abrasive product used for cleaning, finishing, blending and deburring applications. Contains a backing that mounts to hook and loop pads. Abrasive mineral: Medium grade aluminum oxide. Color: Maroon MOS: 6000 RPM
Scotch-Brite™ Surface Conditioning Disc, 7 in x NH A VFN, 25 per caseA non-woven abrasive product used for cleaning, finishing, blending and deburring applications. Contains a backing that mounts to hook and loop pads. Abrasive mineral: Very fine grade aluminum oxide. Color: Blue MOS: 6000 RPM
Printer-friendly format Scotch-Brite™ Surface Conditioning Disc Pack 917S, 7 in, 1 per inner 5 per case
[click to enlarge]
Introductory pack containing a variety of grades of 7 inch non-woven surface conditioning discs. Used for cleaning, finishing, blending and deburring applications. Also includes 917 disc pad holder. MOS: 6000 RPM
3M Id : 61-5001-1760-3GTIN(UPC/EAN) : 0 00 48011 04270 1
Printer-friendly format Scotch-Brite™ Surface Conditioning Disc, 2 in x NH A CRS, 200 per case
[click to enlarge]
A non-woven abrasive product used for cleaning, finishing, blending and deburring applications. Contains a backing that mounts to hook and loop pads. Abrasive mineral: Coarse grade aluminum oxide. Color: Brown MOS: 23000 RPM
3M Id : 61-5000-1303-4GTIN(UPC/EAN) : 0 00 48011 07458 0
Additional Information
Learn More . . .
PackagingData
Characteristics
Abrasive Mineral Type Aluminum OxideColor BrownPrimary Trademark Name Scotch-Brite
Printer-friendly format Scotch-Brite™ Surface Conditioning Disc, 2 in x NH A VFN, 200 per case
[click to enlarge]
A non-woven abrasive product used for cleaning, finishing, blending and deburring applications. Contains a backing that mounts to hook and loop pads. Abrasive mineral: Very fine grade aluminum oxide. Color: Blue MOS: 23000 RPM
3M Id : 61-5000-1597-1GTIN(UPC/EAN) : 0 00 48011 04276 3
Additional Information
Learn More . . .
PackagingData
Characteristics
Abrasive Mineral Type Aluminum OxideColor BluePrimary Trademark Name Scotch-Brite
Printer-friendly format Scotch-Brite™ Surface Conditioning Disc, 7 in x NH A MED, 25 per case
[click to enlarge]
A non-woven abrasive product used for cleaning, finishing, blending and deburring applications. Contains a backing that mounts to hook and loop pads. Abrasive mineral: Medium grade aluminum oxide. Color: Maroon MOS: 6000 RPM
3M Id : 61-5001-2106-8GTIN(UPC/EAN) : 0 00 48011 00645 1
Additional Information
Learn More . . .
PackagingData
Characteristics
Abrasive Mineral Type Aluminum OxideColor MaroonPrimary Trademark Name Scotch-Brite
Printer-friendly format Scotch-Brite™ Surface Conditioning Disc, 7 in x NH A VFN, 25 per case
[click to enlarge]
A non-woven abrasive product used for cleaning, finishing, blending and deburring applications. Contains a backing that mounts to hook and loop pads. Abrasive mineral: Very fine grade aluminum oxide. Color: Blue MOS: 6000 RPM
3M Id : 61-5001-2116-7GTIN(UPC/EAN) : 0 00 48011 04305 0
Additional Information
Learn More . . .
PackagingData
Characteristics
Abrasive Mineral Type Aluminum OxideColor BluePrimary Trademark Name Scotch-Brite
http://products3.3m.com/catalog/ww/en001/mining/-/node_..._ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:29:40 AM
Select a Location
English
By Keyword
3M Global Mining : 3M™ Hi-Tack 76 Classic Spray Adhesive Original Formula,...e or use in CA & other states. Consult local air quality rules before use.
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Adhesive Products
3M™ Hi-Tack 76 Classic Spray Adhesive Original Formula, 24 oz, 12 per case, Not for sale or use in CA & other states. Consult local air quality rules before use.
[click to
enlarge]
Not for sale or use in CA and other states. Consult local air quality rules before use. Quick-tacking, fast strength buildup. Aerosol, for bonding hard to hold materials like polyethylene and polypropylene. SBR rubber, fabric and felt.
3M Id : 62-4677-4930-5GTIN(UPC/EAN) : 0 00 21200 96317 9
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
This product can effectively bond many hard to hold materials such as polyethylene. It can bond rubber, fabric, felt, cardboard, cork, foil, and many plastics to themselves and to wood, metal, glass, and other surfaces.
http://products3.3m.com/catalog/ww/en001/mining/-/node_G..._ww_globalmining_3_0/command_AbcPageHandler/output_print22/11/2006 11:29:50 AM
Select a Location
English
Email
3M Global Mining : 3M™ Hi-Tack 76 Classic Spray Adhesive Original Formula,...e or use in CA & other states. Consult local air quality rules before use.
Product Catalog for 3M Mining Maintenance Solutions Adhesive Products 3M™ Hi-Tack 76 Classic Spray Adhesive Original Formula, 24 oz, 12 per case, Not for sale or use in CA & other states. Consult local
air quality rules before use.
3M™ Hi-Tack 76 Classic Spray Adhesive Original Formula, 24 oz, 12 per case, Not for sale or use in CA & other states. Consult local air quality rules before use.
http://products3.3m.com/catalog/ww/en001/mining/-/node_G...almining_3_0/command_PackagingOutlinkHandler/output_html22/11/2006 11:29:59 AM
Select a Location
English
By Keyword
3M Global Mining : 3M™ Scotch-Grip™ Industrial Adhesive 4799 Black, 5 oz tube, 36 per case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Adhesive Products
3M™ Scotch-Grip™ Industrial Adhesive 4799 Black, 5 oz tube, 36 per case
[click to enlarge]
A black, brushable, heat resistant adhesive that develops strength rapidly and provides good creep resistance and low soak-in on porous surfaces. Bond rubber (including EPDM) and many materials such as canvas and linoleum to metal, wood and concrete.
3M Id : 62-4799-2631-3GTIN(UPC/EAN) : 0 00 21200 21354 0
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Scotch-Grip™ Industrial Adhesive 4799 - Data Sheet (PDF 12.8 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
It dries rapidly to a water and heat resistant bond. GALLONS AND LARGER - NOT INTENDED FOR CONSUMER SALE OR USE.
http://products3.3m.com/catalog/ww/en001/mining/-/node_G...almining_3_0/command_PackagingOutlinkHandler/output_html22/11/2006 11:30:12 AM
Select a Location
English
By Keyword
3M Global Mining : 3M™ Scotch-Grip™ Plastic Adhesive 4475 Clear, 5 oz tube, 36 per case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Adhesive Products
3M™ Scotch-Grip™ Plastic Adhesive 4475 Clear, 5 oz tube, 36 per case
[click to enlarge]
A clear, general purpose adhesive that dries rapidly. Has excellent resistance to plasticizers, water, detergent , and soap solutions. Can be used to bond many ceramics, glass, leather, cloth and vinyls to themselves and a wide variety of substrates.
3M Id : 62-4475-2631-0GTIN(UPC/EAN) : 0 00 21200 21220 8
http://products3.3m.com/catalog/ww/en001/mining/-/node_G...almining_3_0/command_PackagingOutlinkHandler/output_html22/11/2006 11:30:26 AM
Select a Location
English
By Keyword
3M Global Mining : 3M™ Scotch-Grip™ Rubber And Gasket Adhesive 847 Brown, 1 qt, 12 per case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Adhesive Products
3M™ Scotch-Grip™ Rubber And Gasket Adhesive 847 Brown, 1 qt, 12 per case
[click to enlarge]
A premium quality, reddish brown, multi-purpose adhesive. Develops strong flexible bonds very rapidly to a wide variety of substrates, including many plastics and rubbers, gasketing materials and leather. Has exceptional resistance to most fuels and oil.
3M Id : 62-0847-6530-4GTIN(UPC/EAN) : 0 00 21200 19721 5
http://products3.3m.com/catalog/ww/en001/mining/-/node_G..._0/command_ImageOutlinkHandler/output_html/imageid_5558722/11/2006 11:30:49 AM
Select a Location
English
By Keyword
3M Global Mining : 3M™ Scotch-Grip™ Rubber And Gasket Adhesive 1300 Yellow, 1 qt, 12 per case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Adhesive Products
3M™ Scotch-Grip™ Rubber And Gasket Adhesive 1300 Yellow, 1 qt, 12 per case
[click to enlarge]
A yellow, premium quality, versatile, brushable, heat resistant adhesive that develops strength rapidly. Has excellent adhesion to metal, bake enamel, wood, most plastics, and neoprene, reclaim, SBR, and butyl rubber. NOT for EPDM rubber.
3M Id : 62-1300-6530-3GTIN(UPC/EAN) : 0 00 21200 19871 7
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Scotch-Grip ™ Brand 1300-L Rubber and Gasket Adhesive - Data Sheet (PDF 18.3 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
http://products3.3m.com/catalog/ww/en001/mining/-/node_G...almining_3_0/command_PackagingOutlinkHandler/output_html22/11/2006 11:31:04 AM
Select a Location
English
By Keyword
3M Global Mining : 3M™ Scotch-Grip™ Rubber And Gasket Adhesive 1300 Yellow, 5 oz tube, 36 per case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Adhesive Products
3M™ Scotch-Grip™ Rubber And Gasket Adhesive 1300 Yellow, 5 oz tube, 36 per caseA yellow, premium quality, versatile, brushable, heat resistant adhesive that develops strength rapidly.
3M Id : 62-1300-2631-3GTIN(UPC/EAN) : 0 00 21200 19868 7
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Scotch-Grip ™ Brand 1300-L Rubber and Gasket Adhesive - Data Sheet (PDF 18.3 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Characteristics
Bonding Range Up to 12 MinutesColor Dry Film YellowOverlap Shear Strength at 75 Degrees F (24 Degrees C) for Birch Plywood to Birch Plywood 549 Pound-Force Per Square Inch
Overlap Shear Strength at 180 Degrees F (82 Degrees C) for Birch Plywood to Birch Plywood 136 Pound-Force Per Square Inch
Peel Strength at 75 Degrees F (24 Degrees C) for Canvas to Cold Rolled Steel 52 Pound Per Inch (Of Width) Primary Trademark Name 3MSize 5 oz.Units per Case 36
http://products3.3m.com/catalog/ww/en001/mining/-/node_G...almining_3_0/command_PackagingOutlinkHandler/output_html22/11/2006 11:31:20 AM
Select a Location
English
By Keyword
3M Global Mining : 3M™ Scotch-Weld™ Acrylic Adhesive DP805 Light Yellow, 1.6 fl oz or 47 ml, 12 per case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Adhesive Products
3M™ Scotch-Weld™ Acrylic Adhesive DP805 Light Yellow, 1.6 fl oz or 47 ml, 12 per case
[click to enlarge]
Two-part, high performance, toughened acrylic adhesive. It has a 1:1 mix ratio and exhibits exceptional overlap shear and peel strength to both metallic and plastic surfaces. It also exhibits excellent environmental resistance with a 4 minute worklife.
3M Id : 62-3288-1435-5GTIN(UPC/EAN) : 0 00 21200 83758 6
http://products3.3m.com/catalog/ww/en001/mining/-/node_G...almining_3_0/command_PackagingOutlinkHandler/output_html22/11/2006 11:31:33 AM
Select a Location
English
By Keyword
3M Global Mining : 3M™ Scotch-Weld™ Epoxy Adhesive DP125 Gray Duo-Pak, 1.7 fl oz, 12 per case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Adhesive Products
3M™ Scotch-Weld™ Epoxy Adhesive DP125 Gray Duo-Pak, 1.7 fl oz, 12 per case
[click to
enlarge]
Two-part epoxy adhesive with a 1:1 mix ratio, 25 minute worklife and exhibits very high peel strength. Cures at room temperature. Use to bond rubber, metal, wood, plastics, and masonry products.
3M Id : 62-3293-1435-5GTIN(UPC/EAN) : 0 00 21200 87215 0
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
3M™ Epoxy and Hot Melt Adhesives for Electronics - Brochure (PDF 1.6 MB)
http://products3.3m.com/catalog/ww/en001/mining/-/node_G...almining_3_0/command_PackagingOutlinkHandler/output_html22/11/2006 11:31:46 AM
Select a Location
English
By Keyword
3M Global Mining : 3M™ Scotch-Weld™ EPX™ Mixing Nozzle 9742, 50 mL, 72 per case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Adhesive Products
3M™ Scotch-Weld™ EPX™ Mixing Nozzle 9742, 50 mL, 72 per case
[click to enlarge]
3M™ Scotch-Weld™ EPX™ Mixing Nozzle 9742 is for the 50 ml EPX applicator. The applicator is used to dispense 3M™ Scotch-Weld™ adhesives in duo-pak cartridges.
3M Id : 62-9742-9935-6GTIN(UPC/EAN) : 0 00 21200 21791 3
Additional Information
Learn More . . .
PackagingData
This mixing nozzle is for the 50 ml EPX Applicator. The 50 ml EPX Applicator is used to dispense 3M™ Scotch-Weld™ Adhesives in Duo-Pak Cartridges.
http://products3.3m.com/catalog/ww/en001/mining/-/node_G...almining_3_0/command_PackagingOutlinkHandler/output_html22/11/2006 11:32:01 AM
Select a Location
English
By Keyword
3M Global Mining : 3M™ Citrus Base Cleaner, 6 oz, 24 per case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Cleaning Products
3M™ Citrus Base Cleaner, 6 oz, 24 per case
[click to
enlarge]
A liquid cleaner/degreaser that can be used to dissolve and remove dirt, grease, tar, and many non-curing type adhesives. It can also be used to degrease substrates for adhesive bonding in place of many chlorinated or petroleum-based solvents.
3M Id : CS-0406-6966-8
Additional InformationIt contains no petroleum distillates. 3M™ Citrus Base Cleaner can be used to clean and degrease metal parts, motors, tools, printing presses, concrete, or almost any dirty or greasy surface.
http://products3.3m.com/catalog/ww/en001/mining/-/node_J..._ww_globalmining_3_0/command_AbcPageHandler/output_print22/11/2006 11:32:10 AM
Select a Location
English
3M Global Mining : Scotch-Brite™ High Performance Cloth
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Cleaning Products
Scotch-Brite™ High Performance Cloth
[click to enlarge]
Durable cleaning cloth, lifts and traps dust, grease, oils and fingerprints. Ideal for cleaning instrument gauges, safety glasses and helmet visors.
Make a Selection
Scotch-Brite™ High Performance Cleaning Cloth 2011 YellowSpecifically designed with a unique combination of bi-component microfibers and knit construction for safe, effective cleaning on the most delicate surfaces. So effective - you can clean without chemicals! 32 cm x 36 cm, 50 per case
Scotch-Brite™ High Performance Cleaning Cloth, 2011, Blue 32 cm x 36 cm 50/csSpecifically designed with a unique combination of bi-component microfibers and knit construction for safe, effective cleaning on the most delicate surfaces. So effective - you can clean without chemicals! 32 cm x 36 cm, 50 per case
Scotch-Brite™ High Performance Cleaning Cloth, 2011, GreenSpecifically designed with a unique combination of bi-component microfibers and knit construction for safe, effective cleaning on the most delicate surfaces. So effective - you can clean without chemicals! 32 cm x 36 cm, 50 per case
Scotch-Brite™ High Performance Cleaning Cloth, 2011, White, 50/caseSpecifically designed with a unique combination of bi-component microfibers and knit construction for safe, effective cleaning on the most delicate surfaces. So effective - you can clean without chemicals! 32 cm x 36 cm, 50 per case
Product Catalog for 3M Mining Maintenance Solutions Cleaning Products Scotch-Brite™ High
Performance Cloth
Printer-friendly format Scotch-Brite™ High Performance Cleaning Cloth 2011 Yellow
[click to enlarge]
Specifically designed with a unique combination of bi-component microfibers and knit construction for safe, effective cleaning on the most delicate surfaces. So effective - you can clean without chemicals! 32 cm x 36 cm, 50 per case
3M Id : 70-0708-3377-0GTIN(UPC/EAN) : 5 00 48011 23651 8
Additional Information
Learn More . . .
Packaging Data
Scotch-Brite™ High Performance Cloth, No. 2011 - Data Sheet (PDF 101.2 K)
Scotch-Brite™ High Performance Cloth- Chemical Resistance - Data Sheet (PDF 87.0 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
The microfibers and unique knit construction allows for pick up of dust, oil, water and dirt in one pass. The versatility provides a wide range of uses in the manufacturing process and maintenance of such surfaces as stainless steel, chrome, enamel, painted surfaces, plastics, glass, mirrors, windows, computer monitors, wood and marble.
Characteristics
Color YellowLength 36 Linear Centimetre Material Polyester/NylonPrimary Trademark Name Scotch-Brite
Product Catalog for 3M Mining Maintenance Solutions Cleaning Products Scotch-Brite™ High
Performance Cloth
Printer-friendly format Scotch-Brite™ High Performance Cleaning Cloth, 2011, Blue 32 cm x 36 cm 50/cs
[click to enlarge]
Specifically designed with a unique combination of bi-component microfibers and knit construction for safe, effective cleaning on the most delicate surfaces. So effective - you can clean without chemicals! 32 cm x 36 cm, 50 per case
3M Id : 70-0708-3198-0GTIN(UPC/EAN) : 5 00 48011 23589 4
Additional Information
Learn More . . .
Packaging Data
Scotch-Brite™ High Performance Cloth, No. 2011 - Data Sheet (PDF 101.2 K)
Scotch-Brite™ High Performance Cloth- Chemical Resistance - Data Sheet (PDF 87.0 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
The microfibers and unique knit construction allows for pick up of dust, oil, water and dirt in one pass. The versatility provides a wide range of uses in the manufacturing process and maintenance of such surfaces as stainless steel, chrome, enamel, painted surfaces, plastics, glass, mirrors, windows, computer monitors, wood and marble.
Characteristics
Color BlueLength 36 Linear Centimetre Material Polyester/NylonPrimary Trademark Name Scotch-Brite
Product Catalog for 3M Mining Maintenance Solutions Cleaning Products Scotch-Brite™ High
Performance Cloth
Printer-friendly format Scotch-Brite™ High Performance Cleaning Cloth, 2011, Green
[click to enlarge]
Specifically designed with a unique combination of bi-component microfibers and knit construction for safe, effective cleaning on the most delicate surfaces. So effective - you can clean without chemicals! 32 cm x 36 cm, 50 per case
3M Id : 70-0708-3376-2GTIN(UPC/EAN) : 5 00 48011 23650 1
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Scotch-Brite™ High Performance Cloth, No. 2011 - Data Sheet (PDF 101.2 K)
Scotch-Brite™ High Performance Cloth- Chemical Resistance - Data Sheet (PDF 87.0 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
The microfibers and unique knit construction allows for pick up of dust, oil, water and dirt in one pass. The versatility provides a wide range of uses in the manufacturing process and maintenance of such surfaces as stainless steel, chrome, enamel, painted surfaces, plastics, glass, mirrors, windows, computer monitors, wood and marble.
Characteristics
Color GreenLength 36 Linear Centimetre Material Polyester/NylonPrimary Trademark Name Scotch-Brite
Product Catalog for 3M Mining Maintenance Solutions Cleaning Products Scotch-Brite™ High
Performance Cloth
Printer-friendly format Scotch-Brite™ High Performance Cleaning Cloth, 2011, White, 50/case
[click to enlarge]
Specifically designed with a unique combination of bi-component microfibers and knit construction for safe, effective cleaning on the most delicate surfaces. So effective - you can clean without chemicals! 32 cm x 36 cm, 50 per case
3M Id : 70-0708-3375-4GTIN(UPC/EAN) : 5 00 48011 23649 5
Additional Information
Learn More . . .
Packaging Data
High Performance Cloth (Hand) - Product/Application Image- (TIFF)
Scotch-Brite™ High Performance Cloth - Product/Application Image- (TIFF)
Scotch-Brite™ High Performance Cloth, No. 2011 - Data Sheet (PDF 101.2 K)
Scotch-Brite™ High Performance Cloth- Chemical Resistance - Data Sheet (PDF 87.0 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
The microfibers and unique knit construction allows for pick up of dust, oil, water and dirt in one pass. The versatility provides a wide range of uses in the manufacturing process and maintenance of such surfaces as stainless steel, chrome, enamel, painted surfaces, plastics, glass, mirrors, windows, computer monitors, wood and marble.
Characteristics
Color WhiteLength 36 Linear Centimetre Material Polyester/NylonPrimary Trademark Name Scotch-Brite
http://products3.3m.com/catalog/ww/en001/mining/-/nod...w_globalmining_3_0/command_AbcPageHandler/output_html (1 of 2)22/11/2006 11:33:04 AM
Select a Location
English
By Keyword
Email
Email
3M Global Mining : Scotch-Brite™ High Performance Cleaning Cloth, 2011, White, 50/case
http://products3.3m.com/catalog/ww/en001/mining/-/nod...w_globalmining_3_0/command_AbcPageHandler/output_html (2 of 2)22/11/2006 11:33:04 AM
3M Global Mining : 3M™ High Temperature Aluminum Foil/Glass Cloth Tape 363 Silver, 2 in x 36 yd 7.3 mil, 24 per case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Tape Products
3M™ High Temperature Aluminum Foil/Glass Cloth Tape 363 Silver, 2 in x 36 yd 7.3 mil, 24 per case
[click to enlarge]
3M™ High Temperature Aluminum Foil/Glass Coth Tape 363 Silver, aluminum foil backing combined with a glass cloth and pressure sensitive silicone adhesive
3M Id : 70-0060-6880-6GTIN(UPC/EAN) : 0 00 21200 17295 3
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
3M™ HiTemp Aluminum Foil_Glass Cloth 363 and 363L - Data Sheet (PDF 10.2 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ High Temperature Aluminum Foil/Glass Cloth Tape 363 is a strong, flexible tape that can be used as a high temperature heat reflective, protective wrap for heat sensitive cables and other instruments in many aerospace and industrial applications.
Characteristics
Adhesive Material Silicone
Backing Material Aluminum foil laminated to glass cloth
http://products3.3m.com/catalog/ww/en001/mining/-/node_G...almining_3_0/command_PackagingOutlinkHandler/output_html22/11/2006 11:33:21 AM
Select a Location
English
By Keyword
3M Global Mining : 3M™ Masking Tape 2307 Natural, 18 mm x 55 m, 48 per case Bulk
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Tape Products
3M™ Masking Tape 2307 Natural, 18 mm x 55 m, 48 per case Bulk
[click to enlarge]
A general purpose masking tape for holding, bundling, sealing, paint masking and a vast number of other jobs where a paper masking tape is needed. Tape 2307 is typically used at room temperature but will function up to 200 degrees F ( 93 C ).
3M Id : 70-0061-5951-4GTIN(UPC/EAN) : 0 00 21200 71117 6
Additional Information
Learn More . . .
Packaging Data
3M Maksing Tape 2307 - Data Sheet (PDF 10.1 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Characteristics
Adhesive Material Rubber ResinBacking Material Crepe PaperLength 55 Linear Metre Primary Trademark Name 3M
http://products3.3m.com/catalog/ww/en001/mining/-/node_G...almining_3_0/command_PackagingOutlinkHandler/output_html22/11/2006 11:33:38 AM
Select a Location
English
By Keyword
3M Global Mining : 3M™ PTFE Glass Cloth Tape 5451 Brown, 2 in x 36 yd 5.3 mil, 6 per case Boxed
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Tape Products
3M™ PTFE Glass Cloth Tape 5451 Brown, 2 in x 36 yd 5.3 mil, 6 per case Boxed
[click to enlarge]
3M™ PTFE Glass Cloth Tape 5451 Brown, premium performance, glass cloth tape impregnated with PTFE and silicone adhesive. Tape 5451 is a heat seal tape.
3M Id : 70-0160-5451-5GTIN(UPC/EAN) : 0 00 21200 16154 4
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ PTFE Glass Cloth Tape 5451, premium performance PTFE combined with glass cloth is resistant to most chemicals, provides a slick surface, high tensile strength, puncture resistance and abrasion resistance with low moisture absorption. These products provide long lasting, easy release performance on heat sealing machines and process equipment. You also can use the tapes to keep production
Full Text . . .
Characteristics
Adhesive Material SiliconeBacking Material Glass cloth impregnated w/PTFEColor BrownLength 36 Linear Yard Primary Trademark Name 3M
3M™ PTFE Glass Cloth Tape 5451 Brown, 2 in x 36 yd 5.3 mil, 6 per case Boxed
Printer-friendly
format
Additional Information
3M™ PTFE Glass Cloth Tape 5451, premium performance PTFE combined with glass cloth is resistant to most chemicals, provides a slick surface, high tensile strength, puncture resistance and abrasion resistance with low moisture absorption. These products provide long lasting, easy release performance on heat sealing machines and process equipment. You also can use the tapes to keep production moving smoothly through conveying chutes, troughs and ducts.provides a high temperature release surface for protection and insulation such as the bar underneath where the hot wire seals plastic film.
http://products3.3m.com/catalog/ww/en001/mining/-/node_G...balmining_3_0/command_LongDescOutlinkHandler/output_html22/11/2006 11:34:09 AM
Select a Location
English
By Keyword
3M Global Mining : 3M™ Super Bond Film Tape 396 Transparent, 2 in x 36 yd, 24 per case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Tape Products
3M™ Super Bond Film Tape 396 Transparent, 2 in x 36 yd, 24 per case
[click to enlarge]
3M™ Super Bond Film Tape 396, Transparent, 4.1 mil (0.10mm), polyester film tape with a thick layer of rubber adhesive
3M Id : 70-0060-7663-5GTIN(UPC/EAN) : 0 00 21200 19086 5
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
3M™ Super Bond™ Film Tape 396 - Data Sheet (PDF 14.6 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Super Bond Film Tape 396, the thin caliper and tensile strength of the polyester backing, with extremely high immediate adhesion and holding power of the rubber-resin adhesive allow this tape to work well for a wide variety of applications. Excellent Adhesion to low-energy surfaces such as polyethylene.
Characteristics
Adhesive Material Rubber ResinBacking Material PolyesterColor TransparentLength 36 Linear Yard Primary Trademark Name 3M
3M™ UHMW Polyethylene 5421 and 5423 Tape - Data Sheet (PDF 10.2 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ UHMW Polyethylene Tape 5421 helps protect plastic and metal chutes, guide rails and containers from wear. Low coefficient of friction combined with abrasion resistance make this tape an effective solution for many noise and vibration problems.
Characteristics
Adhesive Material Rubber ResinBacking Material UHMWPLength 18 Linear Yard Primary Trademark Name 3M
http://products3.3m.com/catalog/ww/en001/mining/-/node_G...almining_3_0/command_PackagingOutlinkHandler/output_html22/11/2006 11:34:41 AM
Select a Location
English
By Keyword
3M Global Mining : Acrylic Foam Tape
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Tape Products
Acrylic Foam Tape
[click to enlarge]
High strength 3M™ VHB™ tapes are used throughout industry to replace mechanical fastening for permanent assembly in many applications.
Make a Selection
3M™ VHB™ Acrylic Foam Tape 4950 White,18mm x33m, 12 per case45.0 mil, thick white closed cell acrylic foam carrier with all purpose acrylic adhesive and paper liner. High strength, handling convenience, cushioning, damping and impact resistance. UL listing 746C.
3M™ VHB™ Acrylic Foam Tape 4950 White,24mm x33m, 9 per case45.0 mil, thick white closed cell acrylic foam carrier with all purpose acrylic adhesive and paper liner. High strength, handling convenience, cushioning, damping and impact resistance. UL listing 746C.
Printer-friendly format 3M™ VHB™ Acrylic Foam Tape 4950 White,18mm x33m, 12 per case45.0 mil, thick white closed cell acrylic foam carrier with all purpose acrylic adhesive and paper liner. High strength, handling convenience, cushioning, damping and impact resistance. UL listing 746C.
3M Id : CT-0607-2998-6
Additional InformationApplication ideas include attaching stiffeners in air conditioners, office furniture and telecommunications equipment. Also, to bond aluminum skin to steel support of truck, vans ambulances. Bond architectural signs to frames.
Printer-friendly format 3M™ VHB™ Acrylic Foam Tape 4950 White,24mm x33m, 9 per case45.0 mil, thick white closed cell acrylic foam carrier with all purpose acrylic adhesive and paper liner. High strength, handling convenience, cushioning, damping and impact resistance. UL listing 746C.
3M Id : CT-0607-2999-4
Additional InformationApplication ideas include attaching stiffeners in air conditioners, office furniture and telecommunications equipment. Also, to bond aluminum skin to steel support of truck, vans ambulances. Bond architectural signs to frames.
http://products3.3m.com/catalog/ww/en001/mining/-/node_..._ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:35:00 AM
Select a Location
English
By Keyword
3M Global Mining : Aluminum Foil Tape
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Tape Products
Aluminum Foil Tape
[click to enlarge]
Dead-soft aluminum foil tape. Applications include masking of sensitive components to protect from damage during paint stripping.
Make a Selection
3M™ Aluminum Foil Tape 425 Silver, 1 in x 60 yd 4.6 mil, 36 per case Bulk3M™ Aluminum Foil Tape 425 Silver, 4.6 mil (0.12mm), Dead-soft aluminum foil tape with a pressure sensitive acrylic adhesive
3M™ Aluminum Foil Tape 425 Silver, 2 in x 60 yd 4.6 mil, 24 per case Bulk3M™ Aluminum Foil Tape 425 Silver, 4.6 mil (0.12mm), Dead-soft aluminum foil tape with a pressure sensitive acrylic adhesive
3M™ Aluminum Foil Tape 425 Silver, 3 in x 60 yd 4.6 mil, 12 per case Bulk3M™ Aluminum Foil Tape 425 Silver, 4.6 mil (0.12mm), Dead-soft aluminum foil tape with a pressure sensitive acrylic adhesive
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Aluminum Foil Tape 425, dead-soft aluminum foil backing, excellent heat and light reflection to protect against high temperatures and U.V. degradation. The foil also serves as an excellent barrier against moisture, dust, flame, and certain chemicals as used in aircraft paint stripping masking. Acrylic adhesive supplies superior temperature, U.V. and solvent resistance. It provides excellent
Full Text . . .
Characteristics
Adhesive Material AcrylicBacking Material Aluminum FoilLength 60 Linear Yard Primary Trademark Name 3M
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Aluminum Foil Tape 425, dead-soft aluminum foil backing, excellent heat and light reflection to protect against high temperatures and U.V. degradation. The foil also serves as an excellent barrier against moisture, dust, flame, and certain chemicals as used in aircraft paint stripping masking. Acrylic adhesive supplies superior temperature, U.V. and solvent resistance. It provides excellent
Full Text . . .
Characteristics
Adhesive Material AcrylicBacking Material Aluminum FoilLength 60 Linear Yard Primary Trademark Name 3M
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Aluminum Foil Tape 425, dead-soft aluminum foil backing, excellent heat and light reflection to protect against high temperatures and U.V. degradation. The foil also serves as an excellent barrier against moisture, dust, flame, and certain chemicals as used in aircraft paint stripping masking. Acrylic adhesive supplies superior temperature, U.V. and solvent resistance. It provides excellent
Full Text . . .
Characteristics
Adhesive Material AcrylicBacking Material Aluminum FoilLength 60 Linear Yard Primary Trademark Name 3M
http://products3.3m.com/catalog/ww/en001/mining/-/node_..._ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:35:36 AM
Select a Location
English
By Keyword
Email
Email
3M Global Mining : Double Coated Tape
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Tape Products
Double Coated Tape
[click to enlarge]
Double coated tape that is high-tack, hand-tearable double coated film tape with a pressure sensitive adhesive on each side of the carrier.
Make a Selection
3M™ Double Coated Tape 9579 White, 1 1/2 in x 36 yd 9.0 mil, 24 rolls per case Bulk9.0 mil double coated high density polyethylene with rubber adhesive 760 on a 60 lb white densified kraft liner
3M™ Double Coated Tape 9579 White, 3/4 in x 36 yd 9.0 mil, 48 rolls per case Bulk9.0 mil double coated high density polyethylene with rubber adhesive 760 on a 60 lb white densified kraft liner
Printer-friendly format 3M™ Double Coated Tape 9579 White, 1 1/2 in x 36 yd 9.0 mil, 24 rolls per case Bulk9.0 mil double coated high density polyethylene with rubber adhesive 760 on a 60 lb white densified kraft liner
3M Id : 70-0061-5194-1GTIN(UPC/EAN) : 0 00 21200 65870 9
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
3M™ Double Coated Tape 9579 data page - Data Sheet (PDF 14.3 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
*Aggressive rubber adhesive with high initial adhesion *Used for general purpose joining, mounting and splicing *Quick and easy tacking of carpet edges *Hand tearable
Printer-friendly format 3M™ Double Coated Tape 9579 White, 3/4 in x 36 yd 9.0 mil, 48 rolls per case Bulk9.0 mil double coated high density polyethylene with rubber adhesive 760 on a 60 lb white densified kraft liner
3M Id : 70-0061-5196-6GTIN(UPC/EAN) : 0 00 21200 65872 3
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
3M™ Double Coated Tape 9579 data page - Data Sheet (PDF 14.3 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ High Density Silicone Foam Tape S8300T-125A, designed for use as gaskets, seals cushions and thermal and acoustic insulation in demanding conditions.
http://products3.3m.com/catalog/ww/en001/mining/-/node_..._ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:36:03 AM
Select a Location
English
By Keyword
Email
Email
3M Global Mining : Double Coated Urethane Foam Tape
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Tape Products
Double Coated Urethane Foam Tape
[click to enlarge]
Off-white, open-cell urethane foam carrier. Features High shear adhesive with high temperature resistance.
Make a Selection
3M™ Double Coated Urethane Foam Tape 4026 Off-White, 12mm x 33m, 18 per case1/16 in. Thick off white, Open Cell Urethane Foam Flexible Carrier with High Shear, High Temperature Resistant Acrylic Adhesive. Use to Fill Gaps and Bond Irregular Surfaces. Distributes Stress Uniformly Over Bonded Area. Apply by Hand or with Dispenser.
3M™ Double Coated Urethane Foam Tape 4026 Off-White,18mm x33m, 12 per case1/16 in. Thick off white, Open Cell Urethane Foam Flexible Carrier with High Shear, High Temperature Resistant Acrylic Adhesive. Use to Fill Gaps and Bond Irregular Surfaces. Distributes Stress Uniformly Over Bonded Area. Apply by Hand or with Dispenser.
3M™ Double Coated Urethane Foam Tape 4026 Off-White,24mm x 33m, 9 per caseOpen cell urethane foam flexible carrier with high shear, high temperature resistant acrylic adhesive. Use to fill gaps and bond irregular surfaces. Distributes stress uniformly over bonded area. Apply by hand or with dispenser.
Printer-friendly format 3M™ Double Coated Urethane Foam Tape 4026 Off-White, 12mm x 33m, 18 per case1/16 in. Thick off white, Open Cell Urethane Foam Flexible Carrier with High Shear, High Temperature Resistant Acrylic Adhesive. Use to Fill Gaps and Bond Irregular Surfaces. Distributes Stress Uniformly Over Bonded Area. Apply by Hand or with Dispenser.
Printer-friendly format 3M™ Double Coated Urethane Foam Tape 4026 Off-White,18mm x33m, 12 per case1/16 in. Thick off white, Open Cell Urethane Foam Flexible Carrier with High Shear, High Temperature Resistant Acrylic Adhesive. Use to Fill Gaps and Bond Irregular Surfaces. Distributes Stress Uniformly Over Bonded Area. Apply by Hand or with Dispenser.
Printer-friendly format 3M™ Double Coated Urethane Foam Tape 4026 Off-White,24mm x 33m, 9 per caseOpen cell urethane foam flexible carrier with high shear, high temperature resistant acrylic adhesive. Use to fill gaps and bond irregular surfaces. Distributes stress uniformly over bonded area. Apply by hand or with dispenser.
http://products3.3m.com/catalog/ww/en001/mining/-/node_..._ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:36:43 AM
Select a Location
English
By Keyword
3M Global Mining : Glass Cloth Tape
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Tape Products
Glass Cloth Tape
[click to enlarge]
Glass cloth tape with silicone adhesive. High temperature resistance, high adhesion, and a very strong, abrasion resistant backing.
Make a Selection
3M™ Glass Cloth Tape 361 White, 1 in x 60 yd 7.5 mil, 36 per case BulkWhite, 7.5 mil (0.14 mm) glass cloth tape with silicone adhesive. Used for many applications requiring high temperature resistance, high adhesion, and a very strong, abrasion resistant backing such as masking protection in thermal spray operations.
3M™ Glass Cloth Tape 361 White, 1/2 in x 60 yd 7.5 mil, 72 per case BulkWhite, 7.5 mil (0.14 mm) glass cloth tape with silicone adhesive. Used for many applications requiring high temperature resistance, high adhesion, and a very strong, abrasion resistant backing such as masking protection in thermal spray operations.
3M™ Glass Cloth Tape 361 White, 2 in x 60 yd 7.5 mil, 24 per case BulkWhite, 7.5 mil (0.14 mm) glass cloth tape with silicone adhesive. Used for many applications requiring high temperature resistance, high adhesion, and a very strong, abrasion resistant backing such as masking protection in thermal spray operations.
Printer-friendly format 3M™ Glass Cloth Tape 361 White, 1 in x 60 yd 7.5 mil, 36 per case Bulk
[click to enlarge]
White, 7.5 mil (0.14 mm) glass cloth tape with silicone adhesive. Used for many applications requiring high temperature resistance, high adhesion, and a very strong, abrasion resistant backing such as masking protection in thermal spray operations.
3M Id : 70-0023-0613-5GTIN(UPC/EAN) : 0 00 21200 03017 8
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
3M™ Glass Cloth Tape 361 - Data Sheet (PDF 9.8 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
361 tape can be certified to meet F.A.R. 25.853, flame resistant specification.
Characteristics
Adhesive Material SiliconeBacking Material Glass clothColor WhiteLength 60 Linear Yard Primary Trademark Name 3M
Printer-friendly format 3M™ Glass Cloth Tape 361 White, 1/2 in x 60 yd 7.5 mil, 72 per case Bulk
[click to enlarge]
White, 7.5 mil (0.14 mm) glass cloth tape with silicone adhesive. Used for many applications requiring high temperature resistance, high adhesion, and a very strong, abrasion resistant backing such as masking protection in thermal spray operations.
3M Id : 70-0060-3206-7GTIN(UPC/EAN) : 0 00 21200 04993 4
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
3M™ Glass Cloth Tape 361 - Data Sheet (PDF 9.8 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
361 tape can be certified to meet F.A.R. 25.853, flame resistant specification.
Characteristics
Adhesive Material SiliconeBacking Material Glass clothColor WhiteLength 60 Linear Yard Primary Trademark Name 3M
Printer-friendly format 3M™ Glass Cloth Tape 361 White, 2 in x 60 yd 7.5 mil, 24 per case Bulk
[click to enlarge]
White, 7.5 mil (0.14 mm) glass cloth tape with silicone adhesive. Used for many applications requiring high temperature resistance, high adhesion, and a very strong, abrasion resistant backing such as masking protection in thermal spray operations.
3M Id : 70-0060-2019-5GTIN(UPC/EAN) : 0 00 21200 04275 1
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
3M™ Glass Cloth Tape 361 - Data Sheet (PDF 9.8 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
361 tape can be certified to meet F.A.R. 25.853, flame resistant specification.
Characteristics
Adhesive Material SiliconeBacking Material Glass clothColor WhiteLength 60 Linear Yard Primary Trademark Name 3M
http://products3.3m.com/catalog/ww/en001/mining/-/node_..._ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:37:19 AM
Select a Location
English
By Keyword
Email
Email
3M Global Mining : High Performance Double Coated Tape
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Tape Products
High Performance Double Coated Tape
[click to enlarge]
Features a meduim-firm acrylic pressure adhesive system, for a combination of high grab and initial adhesion with excellent static shear holding power.
Make a Selection
3M™ High Performance Double Coated Tape 9573 25mm x 50m 36 rolls per case3M™ HP Double-Coated Tape 9573 25mm x 50m 12/ctn
3M™ High Performance Double Coated Tape 9573 50mm x 50m 18 rolls per case3M™ HP Double-Coated Tape 9573 50mm x 50m 6/ctn
http://products3.3m.com/catalog/ww/en001/mining/-/node_T...e_ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:37:45 AM
Select a Location
English
By Keyword
3M Global Mining : Safety Stripe Tape
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Tape Products
Safety Stripe Tape
[click to enlarge]
Highly conformable and resistant to most common solvents. Clear vinyl over colored stripes provides excellent abrasion resistance to the tape's stripped pattern. Ideal for calling speacial attention to overhead hazards, stairs, forklift traffic, and potentially dangerous pinch points on equipment.
Make a Selection
3M™ Safety Stripe Tape 5702 Black/Yellow, 2 in x 36 yd 5.4 mil, 24 per case Bulk3M™ Safety Stripe Tape 5702 Black/Yellow, 5.4 mil (0.14 mm) vinyl backing with rubber adhesive, resists most common solvents
3M™ Safety Stripe Tape 5702 Black/Yellow, 4 in x 36 yd 5.4 mil, 8 per case Bulk3M™ Safety Stripe Tape 5702 Black/Yellow, 5.4 mil (0.14 mm) vinyl backing with rubber adhesive, resists most common solvents
Printer-friendly format 3M™ Safety Stripe Tape 5702 Black/Yellow, 2 in x 36 yd 5.4 mil, 24 per case Bulk
[click to enlarge]
3M™ Safety Stripe Tape 5702 Black/Yellow, 5.4 mil (0.14 mm) vinyl backing with rubber adhesive, resists most common solvents
3M Id : 70-0060-2605-1GTIN(UPC/EAN) : 0 00 21200 04585 1
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Safety Stripe Tape 5700_5702 - Data Sheet (PDF 12.7 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Safety Stripe Tape 5702, used to identify and mark traffic areas and physical hazards
CharacteristicsAdhesion to Steel oz/in (N/100 mm) 19 (21)
Adhesive Material Rubber ResinBacking Material VinylColor Black/YellowLength 36 Linear Yard Primary Trademark Name 3MSize 2 in x 36 ydTape Color Black/YellowTensile Strength lb/in (N/100 mm) 15 (260)Thickness 5.4 Milli-inch (Mil) Units per Case 24Width 2 Inch
http://products3.3m.com/catalog/ww/en001/mining/-/nod...w_globalmining_3_0/command_AbcPageHandler/output_html (1 of 2)22/11/2006 11:38:01 AM
Select a Location
English
By Keyword
Email
Email
3M Global Mining : 3M™ Safety Stripe Tape 5702 Black/Yellow, 2 in x 36 yd 5.4 mil, 24 per case Bulk
http://products3.3m.com/catalog/ww/en001/mining/-/node_..._ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:38:10 AM
Select a Location
English
By Keyword
Email
Email
3M Global Mining : K-Series
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Mining Specific Glass Bubbles
K-SeriesThe general purpose K Series glass bubbles are the most economical 3M glass bubbles.
Make a Selection
3M™ Glass Bubbles K1, Large box (210 lb, 95.4 kg)K1 glass bubbles have a density of 0.125 g/cc and an isostatic crush strength of 250 psi. The general purpose K Series glass bubbles are the most economical 3M glass bubbles.
3M™ Glass Bubbles K1, Small box (40 lb, 18 kg)K1 glass bubbles have a density of 0.125 g/cc and an isostatic crush strength of 250 psi. The general purpose K Series glass bubbles are the most economical 3M glass bubbles.
3M™ Glass Bubbles K20, Small box (60 lb, 27 kg)K20 glass bubbles have a density of 0.2 g/cc and an isostatic crush strength of 500 psi. The general purpose K Series glass bubbles are the most economical 3M glass bubbles.
3M™ Glass Bubbles K37, Small box (100 lb, 45.4 kg)K37 glass bubbles have a density of 0.37 g/cc and an isostatic crush strength of 3000 psi. The general purpose K Series glass bubbles are the most economical 3M glass bubbles.
Product Catalog for 3M Mining Mining Specific Glass Bubbles K-Series
Printer-friendly format 3M™ Glass Bubbles K1, Large box (210 lb, 95.4 kg)K1 glass bubbles have a density of 0.125 g/cc and an isostatic crush strength of 250 psi. The general purpose K Series glass bubbles are the most economical 3M glass bubbles.
3M Id : 70-0701-8213-7GTIN(UPC/EAN) : 0 00 21200 67338 2
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Product Catalog for 3M Mining Mining Specific Glass Bubbles K-Series
Printer-friendly format 3M™ Glass Bubbles K1, Small box (40 lb, 18 kg)K1 glass bubbles have a density of 0.125 g/cc and an isostatic crush strength of 250 psi. The general purpose K Series glass bubbles are the most economical 3M glass bubbles.
3M Id : 70-0701-9423-1GTIN(UPC/EAN) : 0 00 21200 67432 7
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Product Catalog for 3M Mining Mining Specific Glass Bubbles K-Series
Printer-friendly format 3M™ Glass Bubbles K20, Small box (60 lb, 27 kg)K20 glass bubbles have a density of 0.2 g/cc and an isostatic crush strength of 500 psi. The general purpose K Series glass bubbles are the most economical 3M glass bubbles.
3M Id : 70-0704-2956-1GTIN(UPC/EAN) : 0 00 21200 86423 0
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Product Catalog for 3M Mining Mining Specific Glass Bubbles K-Series
Printer-friendly format 3M™ Glass Bubbles K37, Small box (100 lb, 45.4 kg)K37 glass bubbles have a density of 0.37 g/cc and an isostatic crush strength of 3000 psi. The general purpose K Series glass bubbles are the most economical 3M glass bubbles.
3M Id : 70-0704-5811-5GTIN(UPC/EAN) : 0 00 21200 87320 1
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
http://products3.3m.com/catalog/ww/en001/mining/-/node_9...e_ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:39:01 AM
Select a Location
English
By Keyword
Email
3M Global Mining : S-Series
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Mining Specific Glass Bubbles
S-SeriesThe S Series glass bubbles have smaller particle sizes than the K Series.
Make a Selection
3M™ Glass Bubbles S15, Small box (50 lb, 23 kg)Because of their high strength-to-weight ratio and spherical shape, Scotchlite S15 glass bubbles are used by formulators to increase filler loading, lower viscosity, reduce shrinkage, reduce warping and increase buoyancy.
3M™ Glass Bubbles S22, Small box (60 lb, 27 kg)S22 glass bubbles have a density of 0.22 g/cc and an isostatic crush strength of 400 psi. The S Series glass bubbles have smaller particle sizes than the K Series.
3M™ Glass Bubbles S38, Large box (680 lb, 309 kg)S38 glass bubbles have a density of 0.38 g/cc and an isostatic crush strength of 4000 psi. The S Series glass bubbles have smaller particle sizes than the K Series.
Product Catalog for 3M Mining Mining Specific Glass Bubbles S-Series
Printer-friendly format 3M™ Glass Bubbles S15, Small box (50 lb, 23 kg)Because of their high strength-to-weight ratio and spherical shape, Scotchlite S15 glass bubbles are used by formulators to increase filler loading, lower viscosity, reduce shrinkage, reduce warping and increase buoyancy.
3M Id : 70-0703-2737-7GTIN(UPC/EAN) : 0 00 21200 83893 4
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Product Catalog for 3M Mining Mining Specific Glass Bubbles S-Series
Printer-friendly format 3M™ Glass Bubbles S22, Small box (60 lb, 27 kg)S22 glass bubbles have a density of 0.22 g/cc and an isostatic crush strength of 400 psi. The S Series glass bubbles have smaller particle sizes than the K Series.
3M Id : 70-0704-5823-0GTIN(UPC/EAN) : 0 00 21200 87332 4
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Product Catalog for 3M Mining Mining Specific Glass Bubbles S-Series
Printer-friendly format 3M™ Glass Bubbles S38, Large box (680 lb, 309 kg)S38 glass bubbles have a density of 0.38 g/cc and an isostatic crush strength of 4000 psi. The S Series glass bubbles have smaller particle sizes than the K Series.
3M Id : 70-0704-2970-2GTIN(UPC/EAN) : 0 00 21200 86437 7
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
http://products3.3m.com/catalog/ww/en001/mining/-/node_..._ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:39:37 AM
Select a Location
English
By Keyword
Email
3M Global Mining : 3M™ Fire Barrier FS-195+ Wrap/Strip - 2" X 24"
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Site Safety Fire Protection Products
3M™ Fire Barrier FS-195+ Wrap/Strip - 2" X 24"
[click to enlarge]
One-part, intumescent elastomeric strip with foil on one side. Documented aging properties. Can be cut to fit irregular shapes. Up to 4 hours of Fire Protection.
3M Id : 98-0400-2222-4GTIN(UPC/EAN) : 0 00 51115 07115 7
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Used to firestop metallic and non metallic pipes, insulated pipes and cable bundles. Can be used with the 3M™ Fire Barrier Restricting Collar RC-1 or with caulk in "in-hole" applications. 24 - inch (609 mm) strips, two inches (50 cm) wide.
http://products3.3m.com/catalog/ww/en001/mining/-/node_G...almining_3_0/command_PackagingOutlinkHandler/output_html22/11/2006 11:39:54 AM
Select a Location
English
By Keyword
3M Global Mining : 3M™ Fire Barrier Mortar (44-Pound Bag)
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Site Safety Fire Protection Products
3M™ Fire Barrier Mortar (44-Pound Bag)
[click to
enlarge]
Lightweight cementitious firestop with excellent adhesion, bonds to concrete, metals, wood, plastic and cable jacketing. (44 Pound Bag)
3M Id : 98-0400-2646-4GTIN(UPC/EAN) : 0 00 51115 07559 9
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Variable mix ratio permits self-leveling and no-sag application consistencies. Re-enterable no power tools needed. Bonds to itself - proven prior to and during fire testing. Pumpability allows faster installation. Greater resistance to common concrete poisons than PC-bound products. Contains no asbestos.
http://products3.3m.com/catalog/ww/en001/mining/-/node_G...almining_3_0/command_PackagingOutlinkHandler/output_html22/11/2006 11:40:13 AM
Select a Location
English
By Keyword
3M Global Mining : 3M™ Fire Barrier Plastic Pipe Device PPD6
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Site Safety Fire Protection Products
3M™ Fire Barrier Plastic Pipe Device PPD6
[click to enlarge]
Used to firestop a 6" non-metallic pipe. One piece metal collar assembly encasing 3M's heat expanding FS-195+, used for new and retrofit installations to achieve up to 3 hour fire ratings.
3M Id : 98-0400-2944-3GTIN(UPC/EAN) : 0 00 51115 08253 5
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
http://products3.3m.com/catalog/ww/en001/mining/-/node_G...almining_3_0/command_PackagingOutlinkHandler/output_html22/11/2006 11:40:29 AM
Select a Location
English
By Keyword
3M Global Mining : 3M™ Fire Barrier Restricting Collar RC-1 - 2"
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Site Safety Fire Protection Products
3M™ Fire Barrier Restricting Collar RC-1 - 2"
[click to enlarge]
Works in conjunction with 3M FS-195+ wrap/strip or Ultra GS for firestopping penetrations in wall and floor ceiling assemblies.
3M Id : 80-0080-0656-3GTIN(UPC/EAN) : 0 00 54007 08324 5
Additional Information
Learn More . . .
PackagingData
The RC-1 Restricing Collar is used with Fire Barrier Wrap/Strip to restrict openings and direct the intumescence of the wrap/strip inward, filling all voids.
http://products3.3m.com/catalog/ww/en001/mining/-/node_G...almining_3_0/command_PackagingOutlinkHandler/output_html22/11/2006 11:40:46 AM
Select a Location
English
By Keyword
3M Global Mining : Fire Barrier Composite Sheet
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Site Safety Fire Protection Products
Fire Barrier Composite Sheet
Make a Selection
3M™ Fire Barrier CS-195+ Composite Sheet - 36" X 24" BoxedA 36" x 24" one-part composite system comprised of four components, used for shielding cable trays and conduit, HVAC ductwork and vital process equipment from radiant heat, flame spread and smoke.
3M™ Fire Barrier CS-195+ Composite Sheet - 36" X 41" BoxedA 36" x 41" one-part composite system comprised of four components, used for shielding cable trays and conduit, HVAC ductwork and vital process equipment from radiant heat, flame spread and smoke.
Product Catalog for 3M Mining Site Safety Fire Protection Products Fire Barrier Composite Sheet
Printer-friendly format 3M™ Fire Barrier CS-195+ Composite Sheet - 36" X 24" Boxed
[click to enlarge]
A 36" x 24" one-part composite system comprised of four components, used for shielding cable trays and conduit, HVAC ductwork and vital process equipment from radiant heat, flame spread and smoke.
3M Id : 98-0400-2407-1GTIN(UPC/EAN) : 0 00 51115 07220 8
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
CompositeSheet CS195 + pdf - Data Sheet (PDF 382.6 K)
InteramTapeT49 + pdf - Data Sheet (PDF 15.0 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Ideal for fire-stopping blank openings and through-penetrations of multiple cable, pipe ducts, buss ducts and cable trays. Intumescent. Lightweight and easy to handle - just cut and form to fit. Easy to install using common trade tools. Easy to fasten - bolt punch or drill through and use selftapping screws or anchor bolts. Bottom-of-floor applications available. No mixing or damming required.
Product Catalog for 3M Mining Site Safety Fire Protection Products Fire Barrier Composite Sheet
Printer-friendly format 3M™ Fire Barrier CS-195+ Composite Sheet - 36" X 41" Boxed
[click to enlarge]
A 36" x 41" one-part composite system comprised of four components, used for shielding cable trays and conduit, HVAC ductwork and vital process equipment from radiant heat, flame spread and smoke.
3M Id : 98-0400-2409-7GTIN(UPC/EAN) : 0 00 51115 07224 6
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Ideal for fire-stopping blank openings and through-penetrations of multiple cable, pipe ducts, buss ducts and cable trays. Intumescent. Lightweight and easy to handle - just cut and form to fit. Easy to install using common trade tools. Easy to fasten - bolt punch or drill through and use selftapping screws or anchor bolts. Bottom-of-floor applications available. No mixing or damming required.
http://products3.3m.com/catalog/ww/en001/mining/-/node_..._ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:41:11 AM
Select a Location
English
By Keyword
Email
3M Global Mining : Fire Barrier Pipe Device Hose Clamp Ultra
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Site Safety Fire Protection Products
Fire Barrier Pipe Device Hose Clamp Ultra
Make a Selection
3M™ Interam™ Ultra Plastic Pipe Device UPPD2Used to firestop a 2" non-metallic pipe. One piece metal collar assembly encasing 3M's heat expanding Ultra GS, used for new and retrofit installations to achieve up to 3 hour fire ratings.
3M™ Interam™ Ultra Plastic Pipe Device UPPD3Used to firestop a 3" non-metallic pipe. One piece metal collar assembly encasing 3M's heat expanding Ultra GS, used for new and retrofit installations to achieve up to 3 hour fire ratings.
3M™ Interam™ Ultra Plastic Pipe Device UPPD4Used to firestop a 4" non-metallic pipe. One piece metal collar assembly encasing 3M's heat expanding Ultra GS, used for new and retrofit installations to achieve up to 3 hour fire ratings.
Product Catalog for 3M Mining Site Safety Fire Protection Products Fire Barrier Pipe Device Hose Clamp
Ultra
Printer-friendly format 3M™ Interam™ Ultra Plastic Pipe Device UPPD2
[click to enlarge]
Used to firestop a 2" non-metallic pipe. One piece metal collar assembly encasing 3M's heat expanding Ultra GS, used for new and retrofit installations to achieve up to 3 hour fire ratings.
3M Id : 98-0400-5261-9GTIN(UPC/EAN) : 0 00 51115 08379 2
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Product Catalog for 3M Mining Site Safety Fire Protection Products Fire Barrier Pipe Device Hose Clamp
Ultra
Printer-friendly format 3M™ Interam™ Ultra Plastic Pipe Device UPPD3
[click to enlarge]
Used to firestop a 3" non-metallic pipe. One piece metal collar assembly encasing 3M's heat expanding Ultra GS, used for new and retrofit installations to achieve up to 3 hour fire ratings.
3M Id : 98-0400-5262-7GTIN(UPC/EAN) : 0 00 51115 08380 8
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Product Catalog for 3M Mining Site Safety Fire Protection Products Fire Barrier Pipe Device Hose Clamp
Ultra
Printer-friendly format 3M™ Interam™ Ultra Plastic Pipe Device UPPD4
[click to enlarge]
Used to firestop a 4" non-metallic pipe. One piece metal collar assembly encasing 3M's heat expanding Ultra GS, used for new and retrofit installations to achieve up to 3 hour fire ratings.
3M Id : 98-0400-5263-5GTIN(UPC/EAN) : 0 00 51115 08381 5
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
http://products3.3m.com/catalog/ww/en001/mining/-/node_..._ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:41:41 AM
Select a Location
English
By Keyword
Email
3M Global Mining : 3M™ Maintenance Sorbent Drum Cover M-DC22DD, High Capacity 25/Case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Site Safety Sorbents
3M™ Maintenance Sorbent Drum Cover M-DC22DD, High Capacity 25/Case
[click to enlarge]
The sorbent drum cover is designed to be used on a 55 gallon drum to catch drips and spills that occur during the dispensing of all types of non-aggressive liquids used in daily operations. Contains 25 covers per case and sorbs 12 gallons/case.
3M Id : 70-0704-0591-8GTIN(UPC/EAN) : 5 00 51138 28998 5
Failure to properly handle and dispose of sorbents contaminated by hazardous materials can result in serious physical injury or death and/or environmental harm. For proper handling, consult the Material Safety Data Sheet for the material absorbed. For applicable safety and health standards, contact your supervisor, or call 3M Occupational Health and Environmental Safety Division (OH&ESD) Technical Service at 1-800-243-4630. To reduce the risk of serious physical injury or death, always use respiratory protection and protective clothing appropriate for handling the material to be absorbed. Transportation and disposal of spent sorbents must comply with all applicable federal, state and local laws and regulations. CautionSorbents may become slippery when used on flooring. Do not walk on sorbents or place in high traffic areas.
web-warning-9
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
This drum cover sorbent has a scrim on one side to increase strength and help eliminate linting. With cut-outs for dispensing bungs and a skirt which fits neatly around the base of the drum to catch any drips that would normally end up on the floor.
http://products3.3m.com/catalog/ww/en001/mining/-/node_G...almining_3_0/command_PackagingOutlinkHandler/output_html22/11/2006 11:41:56 AM
Select a Location
English
By Keyword
3M Global Mining : 3M™ Maintenance Sorbent Folded M-FL550DD, High Capacity 3 Boxes/Case = 1 Each
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Site Safety Sorbents
3M™ Maintenance Sorbent Folded M-FL550DD, High Capacity 3 Boxes/Case = 1 Each
[click to enlarge]
This high capacity sorbent has a scrim on one side to increase strength and help eliminate linting. It is dispensed from a carrying/dispenser box in the form of a continuous roll with perforations every 16 inches.
3M Id : 70-0704-0791-4GTIN(UPC/EAN) : 0 00 51138 29071 9
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
3M Maintenance Sorbent Product Information Sheet - Technical Information (PDF 1.3 MB)
3M Spill Control Catalogue - Brochure (PDF 932.5 K)
Specifications and Ordering Info for Maintenance Sorbent - Folde - Product Selection Guide (PDF 4.7 K)
Specifications and Ordering Info for Maintenance Sorbent - Rugs - Product Selection Guide (PDF 4.9 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Utilizing 3M's folded sorbent technology, it can be used as a pillow, pad, roll or boom. Applications range from maintenance to spill response.
CharacteristicsPrimary Trademark Name 3M
Size 5 in x 50 ftSorption 31.5 gallons/caseUnits per Case 3
http://products3.3m.com/catalog/ww/en001/mining/-/node_G...almining_3_0/command_PackagingOutlinkHandler/output_html22/11/2006 11:42:14 AM
Select a Location
English
By Keyword
3M Global Mining : 3M™ Maintenance Sorbent Production Pad M-PD720GG, High Capacity 100 Pads/Case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Site Safety Sorbents
3M™ Maintenance Sorbent Production Pad M-PD720GG, High Capacity 100 Pads/Case
[click to enlarge]
Used to clean up small spills and wipe down oily tools and equipment. Designed to be placed on machinery to catch leaks at the source. Each case sorbs 31.5 gallons and contains 100 pads (each 7.5 inches by 20.5 inches).
3M Id : 70-0704-0587-6GTIN(UPC/EAN) : 5 00 51138 28994 7
Failure to properly handle and dispose of sorbents contaminated by hazardous materials can result in serious physical injury or death and/or environmental harm. For proper handling, consult the Material Safety Data Sheet for the material absorbed. For applicable safety and health standards, contact your supervisor, or call 3M Occupational Health and Environmental Safety Division (OH&ESD) Technical Service at 1-800-243-4630. To reduce the risk of serious physical injury or death, always use respiratory protection and protective clothing appropriate for handling the material to be absorbed. Transportation and disposal of spent sorbents must comply with all applicable federal, state and local laws and regulations. CautionSorbents may become slippery when used on flooring. Do not walk on sorbents or place in high traffic areas.
web-warning-9
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
This high capacity sorbent has a scrim on one side to increase strength and help eliminate linting. This conveniently sized pad allows the user to quickly spread sorbent on and in the path of a spill. It can also be used on a work surface in anticipation of a spill or as a wipe.
http://products3.3m.com/catalog/ww/en001/mining/-/node_G...almining_3_0/command_PackagingOutlinkHandler/output_html22/11/2006 11:42:32 AM
Select a Location
English
By Keyword
3M Global Mining : 3M™ Maintenance Sorbent Roll M-RL38150DD, High Capacity 1 Roll/Case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Site Safety Sorbents
3M™ Maintenance Sorbent Roll M-RL38150DD, High Capacity 1 Roll/Case
[click to enlarge]
Designed to cover large surfaces and may be easily cut to fit tight corners. Can also be used to cover large spills or as a precaution in areas where large spills may occur. Each roll is 38 inches by 150 feet and sorbs 76 gallons.
3M Id : 70-0704-0590-0GTIN(UPC/EAN) : 0 00 51138 28997 3
Failure to properly handle and dispose of sorbents contaminated by hazardous materials can result in serious physical injury or death and/or environmental harm. For proper handling, consult the Material Safety Data Sheet for the material absorbed. For applicable safety and health standards, contact your supervisor, or call 3M Occupational Health and Environmental Safety Division (OH&ESD) Technical Service at 1-800-243-4630. To reduce the risk of serious physical injury or death, always use respiratory protection and protective clothing appropriate for handling the material to be absorbed. Transportation and disposal of spent sorbents must comply with all applicable federal, state and local laws and regulations. CautionSorbents may become slippery when used on flooring. Do not walk on sorbents or place in high traffic areas.
web-warning-9
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
This sorbent pad has a scrim on one side to increase the strength and help eliminate linting. Available in a convenient width of 38 inches, perfect for lining drawers, covering workbenches, or masking larger areas from mist and overspray. Rolls of sorbent material are used to cover and sorb large spills or in areas where spills may occur. Conveniently packaged so that they may be cut to the
Product Catalog for 3M Mining Site Safety Sorbents 3M™ Maintenance Sorbent Roll M-RL38150DD,
High Capacity 1 Roll/Case
3M™ Maintenance Sorbent Roll M-RL38150DD, High Capacity 1 Roll/Case
Printer-friendly
format
Additional Information
This sorbent pad has a scrim on one side to increase the strength and help eliminate linting. Available in a convenient width of 38 inches, perfect for lining drawers, covering workbenches, or masking larger areas from mist and overspray. Rolls of sorbent material are used to cover and sorb large spills or in areas where spills may occur. Conveniently packaged so that they may be cut to the desired length.
http://products3.3m.com/catalog/ww/en001/mining/-/node_G...balmining_3_0/command_LongDescOutlinkHandler/output_html22/11/2006 11:43:03 AM
Select a Location
English
By Keyword
3M Global Mining : 3M™ Maintenance Sorbent Rug M-RGC36100E, with Coating 1 Rug/Case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Site Safety Sorbents
3M™ Maintenance Sorbent Rug M-RGC36100E, with Coating 1 Rug/Case
[click to enlarge]
This rug is designed for use in industrial maintenance applications where foot and vehicle traffic is a concern, and will sorb most non-aggressive liquids . Each rug comes in a roll 36 inches by 100 feet and sorbs 10.5 gallons per roll.
3M Id : 70-0704-0623-9GTIN(UPC/EAN) : 0 00 51138 29003 0
Failure to properly handle and dispose of sorbents contaminated by hazardous materials can result in serious physical injury or death and/or environmental harm. For proper handling, consult the Material Safety Data Sheet for the material absorbed. For applicable safety and health standards, contact your supervisor, or call 3M Occupational Health and Environmental Safety Division (OH&ESD) Technical Service at 1-800-243-4630. To reduce the risk of serious physical injury or death, always use respiratory protection and protective clothing appropriate for handling the material to be absorbed. Transportation and disposal of spent sorbents must comply with all applicable federal, state and local laws and regulations. CautionSorbents may become slippery when used on flooring. Do not walk on sorbents or place in high traffic areas.
web-warning-9
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
This sorbent rug is used in areas where foot and vehicle traffic is an concern. Designed to sorb liquids while enduring the punishment of being tread upon, it is both durable and versatile. The coated rug material can be used on a clean and smooth floor to insure that the material does not slip when walked upon. It may also be used as a barrier to protect the floor or other surface below it from
Product Catalog for 3M Mining Site Safety Sorbents 3M™ Maintenance Sorbent Rug M-RGC36100E,
with Coating 1 Rug/Case
3M™ Maintenance Sorbent Rug M-RGC36100E, with Coating 1 Rug/Case
Printer-friendly
format
Additional Information
This sorbent rug is used in areas where foot and vehicle traffic is an concern. Designed to sorb liquids while enduring the punishment of being tread upon, it is both durable and versatile. The coated rug material can be used on a clean and smooth floor to insure that the material does not slip when walked upon. It may also be used as a barrier to protect the floor or other surface below it from liquids leaking through.
http://products3.3m.com/catalog/ww/en001/mining/-/node_G...balmining_3_0/command_LongDescOutlinkHandler/output_html22/11/2006 11:43:28 AM
Select a Location
English
By Keyword
3M Global Mining : 3M™ Clean-Walk Mat 5802, 24 in x 45 in, 30 per pad, 4 pads per case, Restricted
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Site Safety Traffic Control Products
3M™ Clean-Walk Mat 5802, 24 in x 45 in, 30 per pad, 4 pads per case, Restricted
[click to
enlarge]
An adhesive coated mat that is used in removing dirt from the bottom of shoes, wheels or any passing objects. To expose an adhesive surface, just peel the top sheet back.
3M Id : 70-0061-6265-8GTIN(UPC/EAN) : 0 00 21200 23216 9
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Characteristics
Adhesive Material SyntheticBacking Material PolyethyleneLength 45 Inch Mat Color WhitePrimary Trademark Name 3M
http://products3.3m.com/catalog/ww/en001/mining/-/node_G...almining_3_0/command_PackagingOutlinkHandler/output_html22/11/2006 11:43:47 AM
Select a Location
English
By Keyword
3M Global Mining : 3M™ Safety-Walk™ Conformable Tread 19280 Black, 2 in x 60 ft, 2 per case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Site Safety Traffic Control Products
3M™ Safety-Walk™ Conformable Tread 19280 Black, 2 in x 60 ft, 2 per case
[click to enlarge]
Ideal for use on diamond grade safety plates., steps and other irregular surfaces. Mineral coated, slip-resistant with aluminum foil backing. Conforms to irregular surfaces and around edges.
3M Id : 70-0705-4864-2GTIN(UPC/EAN) : 5 00 48011 19280 7
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
High-friction, slip-resistant material has a special aluminum backing that conforms around corners and adheres to irregular surfaces. Applications: diamond grade safety plates, steps and ladder rungs. Heavy equipment and vehicles. Available in custom sizes and with custom adhesives.
Characteristics
Adhesives YesColor BlackLength 60 Linear Foot Primary Trademark Name Safety-Walk
Substrate Material Aluminum FoilSurface Material MineralWidth 2 Inch
http://products3.3m.com/catalog/ww/en001/mining/-/node_G...almining_3_0/command_PackagingOutlinkHandler/output_html22/11/2006 11:44:03 AM
Select a Location
English
By Keyword
3M Global Mining : Safety-Walk™ General Purpose Tread
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Site Safety Traffic Control Products
Safety-Walk™ General Purpose Tread
[click to enlarge]
This mineral-coated, slip-resistant material features a highly durable surface. Low-profile design reduces trip hazard.
Make a Selection
3M™ Safety-Walk™ General Purpose Tread 610, Black Tread, 6 in x 24 in, 50 per caseThis mineral-coated, slip-resistant material featrues a highly durable surface. Low-profile design reduces trip hazard.
3M™ Safety-Walk™ General Purpose Tread Black, 1 in x 60 ft, 4 per caseThis mineral-coated, slip-resistant material featrues a highly durable surface. Low-profile design reduces trip hazard.
3M™ Safety-Walk™ General Purpose Tread Black, 2 in x 60 ft, 2 per caseThis mineral-coated, slip-resistant material featrues a highly durable surface. Low-profile design reduces trip hazard.
Product Catalog for 3M Mining Site Safety Traffic Control Products Safety-Walk™ General Purpose
Tread
Printer-friendly format 3M™ Safety-Walk™ General Purpose Tread Black, 1 in x 60 ft, 4 per caseThis mineral-coated, slip-resistant material featrues a highly durable surface. Low-profile design reduces trip hazard.
3M Id : 70-0705-4351-0GTIN(UPC/EAN) : 5 00 48011 19220 3
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
For use on smooth, flat surfaces. Pressure sensitive adhesive, covered by a removable protective liner. Easy to apply.
Characteristics
Adhesives YesColor BlackLength 60 Linear Foot Primary Trademark Name 3M
Substrate Material Plastic FilmSurface Material MineralWidth 1 Inch
http://products3.3m.com/catalog/ww/en001/mining/-/node_..._ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:44:37 AM
Select a Location
English
By Keyword
Email
3M Global Mining : Vinyl Lane Marking Tape
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Site Safety Traffic Control Products
Vinyl Lane Marking Tape
[click to enlarge]
Vinyl film tape with a rubber adhesive, ideal for safety marking requirements. Available in a variety of sizes and colours.
Make a Selection
3M™ Vinyl Tape 471 Red, 3 in x 36 yd, 12 per case Bulk3M™ Vinyl Tape 471 Red, 5.2 mil (0.13 mm), vinyl backing with a rubber adhesive, maintain color even when exposed to heavy abrasion, conformable, maintain color throughout not printed, dead stretch properties to provide straighter lines, clean removal
3M™ Vinyl Tape 471 White, 1/2 in x 36 yd, 72 per case Bulk3M™ Vinyl Tape 471 White, 5.2 mil (0.13 mm), vinyl backing with a rubber adhesive, maintain color even when exposed to heavy abrasion, conformable, maintain color throughout not printed, dead stretch properties to provide straighter lines, clean remova
3M™ Vinyl Tape 471 Yellow, 1/2 in x 36 yd, 72 per case Bulk3M™ Vinyl Tape 471 Yellow, 5.2 mil (0.13 mm), vinyl backing with a rubber adhesive, maintain color even when exposed to heavy abrasion, conformable, maintain color throughout not printed, dead stretch properties to provide straighter lines, clean remov
Product Catalog for 3M Mining Site Safety Traffic Control Products Vinyl Lane Marking Tape
Printer-friendly format 3M™ Vinyl Tape 471 Red, 3 in x 36 yd, 12 per case Bulk
[click to enlarge]
3M™ Vinyl Tape 471 Red, 5.2 mil (0.13 mm), vinyl backing with a rubber adhesive, maintain color even when exposed to heavy abrasion, conformable, maintain color throughout not printed, dead stretch properties to provide straighter lines, clean removal
3M Id : 70-0024-0927-7GTIN(UPC/EAN) : 0 00 21200 06469 2
Additional Information
Learn More . . .
Packaging Data
Vinyl Tape 471 and 4712 - Data Sheet (PDF 11.6 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Vinyl Tape 471, ideal for masking, wrapping or sealing many curved or irregular surfaces, excellent for many lane and safety marking applications, ideal for color coding, abrasion protection, decoration and splicing applications
Characteristics
Adhesive Material Rubber ResinBacking Material Pigmented vinyl plasticColor RedLength 36 Linear Yard Primary Trademark Name 3M
Product Catalog for 3M Mining Site Safety Traffic Control Products Vinyl Lane Marking Tape
Printer-friendly format 3M™ Vinyl Tape 471 White, 1/2 in x 36 yd, 72 per case Bulk
[click to enlarge]
3M™ Vinyl Tape 471 White, 5.2 mil (0.13 mm), vinyl backing with a rubber adhesive, maintain color even when exposed to heavy abrasion, conformable, maintain color throughout not printed, dead stretch properties to provide straighter lines, clean remova
3M Id : 70-0024-1403-8GTIN(UPC/EAN) : 0 00 21200 03134 2
Additional Information
Learn More . . .
Packaging Data
Vinyl Tape 471 and 4712 - Data Sheet (PDF 11.6 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Vinyl Tape 471, ideal for masking, wrapping or sealing many curved or irregular surfaces, excellent for many lane and safety marking applications, ideal for color coding, abrasion protection, decoration and splicing applications
Characteristics
Adhesive Material Rubber ResinBacking Material Pigmented vinyl plasticLength 36 Linear Yard Primary Trademark Name 3M
Product Catalog for 3M Mining Site Safety Traffic Control Products Vinyl Lane Marking Tape
Printer-friendly format 3M™ Vinyl Tape 471 Yellow, 1/2 in x 36 yd, 72 per case Bulk
[click to enlarge]
3M™ Vinyl Tape 471 Yellow, 5.2 mil (0.13 mm), vinyl backing with a rubber adhesive, maintain color even when exposed to heavy abrasion, conformable, maintain color throughout not printed, dead stretch properties to provide straighter lines, clean remov
3M Id : 70-0024-1303-0GTIN(UPC/EAN) : 0 00 21200 03126 7
Additional Information
Learn More . . .
Packaging Data
Vinyl Tape 471 and 4712 - Data Sheet (PDF 11.6 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Vinyl Tape 471, ideal for masking, wrapping or sealing many curved or irregular surfaces, excellent for many lane and safety marking applications, ideal for color coding, abrasion protection, decoration and splicing applications
Characteristics
Adhesive Material Rubber ResinBacking Material Pigmented vinyl plasticLength 36 Linear Yard Primary Trademark Name 3M
http://products3.3m.com/catalog/ww/en001/mining/-/node_..._ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:45:11 AM
Select a Location
English
By Keyword
Email
3M Global Mining : 3M™ Protective Eyewear 1731, Blue Frame, Clear Lens 24/Case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Worker Safety Eye Protection
3M™ Protective Eyewear 1731, Blue Frame, Clear Lens 24/CaseStylish wrap around safety glasses. Comfortable fit with 4-position adjustable temple and vinyl nose pad. Shaped to fit facial contours.
3M Id : 70-0708-9176-0GTIN(UPC/EAN) : 5 00 51138 76807 7
PROTECTIVE EYEWEAR
3M™ Protective Eyewear Products help provide limited eye and face protection against flying particles. Misuse or failure to follow warnings and instructions may result in serious personal injury, including blindness, or death. For proper use, see supervisor, read instructions and warnings on the package, or call 3M Occupational Health and Environmental Safety Division (OH&ESD) Technical Service in the U.S.A. at 1-800-243-4630. In Canada, call 1-800-267-4414.
warning-web-10
Additional Information
Learn More . . .
Packaging Data
Eye and Face Protection - Fax on Demand (PDF 47.1 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
They meet the high impact requirements of the Standard for Occupational and Educational Eye and Face Protection ANSI Z87.1-2003.
Multi-purpose safety goggles with polycarbonate lens. Vinyl frames allow for excellent fit. Perforated for added ventilation and comfort. Do not use for protection against splash or dust hazards.
3M Id : 70-0708-9161-2GTIN(UPC/EAN) : 5 00 51131 37102 1
PROTECTIVE EYEWEAR
3M™ Protective Eyewear Products help provide limited eye and face protection against flying particles. Misuse or failure to follow warnings and instructions may result in serious personal injury, including blindness, or death. For proper use, see supervisor, read instructions and warnings on the package, or call 3M Occupational Health and Environmental Safety Division (OH&ESD) Technical Service in the U.S.A. at 1-800-243-4630. In Canada, call 1-800-267-4414.
warning-web-10
Additional Information
Learn More . . .
Packaging Data
Eye and Face Protection - Fax on Demand (PDF 47.1 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
These high impact safety goggles meet the requirements of the Standard for Occupational and Educational Eye and Face Protection ANSI Z87.1-2003.
http://products3.3m.com/catalog/ww/en001/mining/-/node_G...almining_3_0/command_PackagingOutlinkHandler/output_html22/11/2006 11:45:46 AM
Select a Location
English
By Keyword
3M Global Mining : 3M™ Visitor Specs 1611/37101(AAD), Clear 300/Case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Worker Safety Eye Protection
3M™ Visitor Specs 1611/37101(AAD), Clear 300/Case
[click to enlarge]
An economical alternative for short term eye protection. Can be worn alone or over prescription glasses. Polycarbonate Lens. Usually used by plant visitors.
3M Id : 70-0708-9160-4GTIN(UPC/EAN) : 5 00 51131 37101 4
Additional Information
Learn More . . .
Packaging Data
Eye and Face Protection - Fax on Demand (PDF 47.1 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Meet the requirements of the Standard for Occupational and Educational Eye and Face Protection ANSI Z87.1-2003.
http://products3.3m.com/catalog/ww/en001/mining/-/node_G...almining_3_0/command_PackagingOutlinkHandler/output_html22/11/2006 11:46:03 AM
Select a Location
English
By Keyword
3M Global Mining : 3M™ Damping Foil 2552 Silver, 2 in x 36 yd 10.0 mil, 5 per case Bulk
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Worker Safety Hearing Protection
3M™ Damping Foil 2552 Silver, 2 in x 36 yd 10.0 mil, 5 per case Bulk
[click to enlarge]
3M™ Damping Foil 2552 Silver, aluminum foil constraining layer coated with a pressure-sensitive viscoelastic polymer on a poly-coated paper easy-release liner.
3M Id : 70-0062-3078-6GTIN(UPC/EAN) : 0 00 21200 38395 3
Additional Information
Learn More . . .
Packaging Data
3M™ Damping Foil 2552 - Data Sheet (PDF 48.4 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Damping Foil Tape 2552 helps damp vibrations on metal and plastic surfaces vibrating at their natural (resonant) frequency, consists of a pressure-sensitive viscoelastic polymer and aluminum foil constraining layer that effectively converts vibrational energy to negligible heat to reducing irritating noises and decreasing wear and tear on parts. Optimal temperature range from 32°F to 140°F
Full Text . . .
Characteristics
Adhesive Material Viscoelastic polymerBacking Material Aluminum FoilLength 36 Linear Yard Primary Trademark Name 3M
Product Catalog for 3M Mining Worker Safety Hearing Protection 3M™ Damping Foil 2552 Silver, 2 in x
36 yd 10.0 mil, 5 per case Bulk
3M™ Damping Foil 2552 Silver, 2 in x 36 yd 10.0 mil, 5 per case Bulk
Printer-friendly
format
Additional Information
3M™ Damping Foil Tape 2552 helps damp vibrations on metal and plastic surfaces vibrating at their natural (resonant) frequency, consists of a pressure-sensitive viscoelastic polymer and aluminum foil constraining layer that effectively converts vibrational energy to negligible heat to reducing irritating noises and decreasing wear and tear on parts. Optimal temperature range from 32°F to 140°F (0°C to 60°C).
http://products3.3m.com/catalog/ww/en001/mining/-/node_G...balmining_3_0/command_LongDescOutlinkHandler/output_html22/11/2006 11:46:30 AM
Select a Location
English
By Keyword
3M Global Mining : Ear Muffs
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Worker Safety Hearing Protection
Ear Muffs
[click to enlarge]
Easy to use ear muffs are comfortable for extended wear in moderate to high noise situations.
Make a Selection
3M™ Ear Muff 1440 20/CaseLightweight, with a soft padded headband for extra comfort. Sliding tension adjustment system to help maintain a good fit. Recommended for moderately high noise situations (up to 95 dBA TWA).
3M™ General Purpose Ear Muff 1435 20/CaseDurable, lightweight, easy to use ear muffs are comfortable for extended wear. Recommended for moderately high noise situations (up to 95 dBA TWA).
3M™ Hard Hat Mounted Ear Muff 1450 20/CaseThese ear muffs can be attached to a wide variety of hard hats without additional adapters. Combines comfort and convenience. Recommended for moderately high noise situations (up to 95 dBA TWA).
Lightweight, with a soft padded headband for extra comfort. Sliding tension adjustment system to help maintain a good fit. Recommended for moderately high noise situations (up to 95 dBA TWA).
3M Id : 70-0705-1763-9GTIN(UPC/EAN) : 5 00 51138 29334 0
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Attenuation Tables - Data Sheet (PDF 85.4 K)
Hearing Protection Products - Fax on Demand (PDF 125.2 K)
How to Use the Noise Reduction Rating (NRR) - Data Sheet (PDF 22.4 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Lightweight, with a soft padded headband for extra comfort, these padded ear muffs feature multi-position ear cups, contoured ear cushions and a sliding headband tension adjustment system. Recommended for moderately high noise situations (up to 95 dBA TWA). Noise reduction rating 24 dB. *Must see the Learn More Section - How to Use the NRR
Benefits
● Slim, durable plastic ear cups● Soft, foam-filled cushions stay soft after extensive use● Contoured ear cushions to enhance fit● Unique molded inserts provide large inner space for the ear and good fit● Wide padded headband for secure fit and comfort● 2-point mounting headband for low evenly distributed pressure and easy
handling● Unique tension adjustment system for exceptional individual fit and comfort● Lightweight (8 ounces)● Replacement cushions and inserts available (replacement parts kit 1442)
CharacteristicsPrimary Trademark Name 3M
http://products3.3m.com/catalog/ww/en001/mining/-/nod...w_globalmining_3_0/command_AbcPageHandler/output_html (1 of 2)22/11/2006 11:46:47 AM
Printer-friendly format 3M™ General Purpose Ear Muff 1435 20/Case
[click to enlarge]
Durable, lightweight, easy to use ear muffs are comfortable for extended wear. Recommended for moderately high noise situations (up to 95 dBA TWA).
3M Id : 70-0705-1762-1GTIN(UPC/EAN) : 5 00 51138 29333 3
HEARING PROTECTION PRODUCTS
These hearing protection products help prevent hearing loss against certain noises. To provide proper protection, the hearing protector should be (1) suitable for the job, (2) fitted properly in/on the ear, (3) worn during all times of exposure to noise, and (4) replaced when damaged or otherwise necessary. Failure to fit and use hearing protectors according to these instructions will reduce their effectiveness. Failure to wear hearing protectors 100% of the time that you are exposed to hazardous noise may dramatically increase your risk of developing hearing loss. Keep ear plugs away from infants and small children. They may get caught in a child’s windpipe.
warning-web-13
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Attenuation Tables - Data Sheet (PDF 85.4 K)
Hearing Protection Products - Fax on Demand (PDF 125.2 K)
How to Use the Noise Reduction Rating (NRR) - Data Sheet (PDF 22.4 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Durable, lightweight, easy to use general purpose ear muffs feature multi-position ear cups mounted on a wide, forked headband for comfort and a secure fit. Roomy, durable ear cups help provide a reliable fit. Soft sealing cushions provide a consistent ear cup seal. Recommended for moderately high noise situations (up to 95 dBA TWA). Noise reduction rating 23 dB. *Must see the Learn More
Full Text . . .
http://products3.3m.com/catalog/ww/en001/mining/-/nod...w_globalmining_3_0/command_AbcPageHandler/output_html (1 of 2)22/11/2006 11:46:59 AM
Select a Location
English
By Keyword
Email
Email
Email
Email
3M Global Mining : 3M™ General Purpose Ear Muff 1435 20/Case
Benefits
● Slim, durable plastic ear cups● Soft, foam-filled cushions stay soft after extensive use● Unique molded inserts provide large inner space for the ear and good fit● Wide headband for low pressure and comfortable, secure fit● 2-point mounting headband for low evenly distributed pressure and easy
handling● Lightweight (7.5 ounces)● Replacement cushions and inserts available (replacement parts kit 1437)
Printer-friendly format 3M™ Hard Hat Mounted Ear Muff 1450 20/Case
[click to enlarge]
These ear muffs can be attached to a wide variety of hard hats without additional adapters. Combines comfort and convenience. Recommended for moderately high noise situations (up to 95 dBA TWA).
3M Id : 70-0705-1764-7GTIN(UPC/EAN) : 5 00 51138 29335 7
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Hearing Protection Products - Fax on Demand (PDF 125.2 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Ear muffs for hard hats feature lightweight ear cups that attach to a variety of hard hats without additional adapters. The multi-position ear cups are beveled to fit comfortably under the hard hat. Ear cups flip up and lock in place when not in use. Contoured ear cushion for improved fit and comfort. Soft sealing cushions and molded foam ear cup inserts are easily replaceable. Noise
http://products3.3m.com/catalog/ww/en001/mining/-/node_..._ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:47:08 AM
Select a Location
English
By Keyword
Email
Email
3M Global Mining : Ear Plugs
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Worker Safety Hearing Protection
Ear Plugs
[click to enlarge]
Foam, banded, reusable and corded ear plugs.
Make a Selection
3M™ Banded Hearing Protector 1310 50/CaseGreat alternative for employees who need intermittent hearing protection.
3M™ Corded Foam Ear Plug 1110, 500/CaseThe comfortable fit of soft foam ear plugs with the convenience of a cord. Recommended for high noise situations (up to 100 dBA TWA).
3M™ Foam Ear Plug 1100, 1000/CaseSoft, comfortable and unobtrusive hearing protection. Recommended for high noise situations (up to 100dBA TWA).
3M™ Reusable Ear Plug 1260 500/CaseSoft, elastic reusable ear plugs that are premolded for easy insertion into the ear without rolling. The multi-flanged design helps keep the ear plug securely in the ear to help provide comfortable and reliable protection.
Printer-friendly format 3M™ Banded Hearing Protector 1310 50/Case
[click to enlarge]
Great alternative for employees who need intermittent hearing protection.
3M Id : 70-0707-5895-1GTIN(UPC/EAN) : 5 00 51138 66003 6
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Banded Hearing Protector 1310 features foam ear pads attached to a lightweight band. The unique flexible band maintains low pressure over a wide range of head sizes. Convenient for people who take hearing protectors off and on many times each day. Noise Reduction Rating: 21 dB (band worn behind head) and 20 dB (band worn under chin) *Must see the Learn More Section - How to Use the NRR
Benefits
● Unique, flexible band makes fitting easy and maintains low pressure over a wide range of head sizes
● Soft foam pads close the ear canal opening without being inserted into the ear● Can be worn with band under-the-chin or behind-the-head● Band can be reused many times for less waste● Comfortable alternative to ear muffs and ear plugs● 3M™ Replacement Pads 1311(sold separately) are cost-effective and easy to
Printer-friendly format 3M™ Corded Foam Ear Plug 1110, 500/Case
[click to enlarge]
The comfortable fit of soft foam ear plugs with the convenience of a cord. Recommended for high noise situations (up to 100 dBA TWA).
3M Id : 70-0704-0631-2GTIN(UPC/EAN) : 5 00 51138 29009 7
HEARING PROTECTION PRODUCTS
These hearing protection products help prevent hearing loss against certain noises. To provide proper protection, the hearing protector should be (1) suitable for the job, (2) fitted properly in/on the ear, (3) worn during all times of exposure to noise, and (4) replaced when damaged or otherwise necessary. Failure to fit and use hearing protectors according to these instructions will reduce their effectiveness. Failure to wear hearing protectors 100% of the time that you are exposed to hazardous noise may dramatically increase your risk of developing hearing loss. Keep ear plugs away from infants and small children. They may get caught in a child’s windpipe.
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Soft, corded foam ear plugs that conform to the unique shape of each ear for excellent hearing protection and comfort. Features a cord for convenience and to prevent loss of ear plugs. Recommended for high noise situations (up to 100 dBA TWA). Noise Reduction Rating: 29 dB. *Must see the Learn More Section - How to Use the NRR
Benefits
● Tapered shape to fit the ear canal comfortably● Soft foam seals the ear comfortably● Smooth, dirt resistant surface for hygiene● Comfortable for a wide range of ear sizes● Hypo-allergenic material● Bright orange color for visibility● Can be combined with ear muffs for additional protection● Can be used with other personal protection equipment
http://products3.3m.com/catalog/ww/en001/mining/-/nod...w_globalmining_3_0/command_AbcPageHandler/output_html (1 of 2)22/11/2006 11:47:39 AM
Printer-friendly format 3M™ Foam Ear Plug 1100, 1000/Case
[click to enlarge]
Soft, comfortable and unobtrusive hearing protection. Recommended for high noise situations (up to 100dBA TWA).
3M Id : 70-0704-0630-4GTIN(UPC/EAN) : 5 00 51138 29008 0
*The NRR may overestimate the protection provided during typical use. 3M recommends reducing the NRR by 50% for estimating the amount of noise reduction provided.
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Soft, comfortable ear plugs that conform to the unique shape of each ear for excellent hearing protection and comfort. Tapered to comfortably fit the ear canal. Recommended for high noise situations (up to 100dBA TWA). Noise Reduction Rating: 29 dB. *Must see the Learn More Section - How to Use the NRR
Benefits
● Tapered shape to fit the ear canal comfortably● Soft foam seals the ear comfortably● Smooth, dirt resistant surface for hygiene● Comfortable for a wide range of ear sizes● Hypo-allergenic material● Bright orange color for visibility● Can be combined with ear muffs for additional protection● Can be used with other personal protection equipment
Characteristics
Boxes per Case 5Primary Trademark Name 3M
http://products3.3m.com/catalog/ww/en001/mining/-/nod...w_globalmining_3_0/command_AbcPageHandler/output_html (1 of 2)22/11/2006 11:47:50 AM
Select a Location
English
By Keyword
Email
Email
3M Global Mining : 3M™ Foam Ear Plug 1100, 1000/Case
Printer-friendly format 3M™ Reusable Ear Plug 1260 500/Case
[click to enlarge]
Soft, elastic reusable ear plugs that are premolded for easy insertion into the ear without rolling. The multi-flanged design helps keep the ear plug securely in the ear to help provide comfortable and reliable protection.
3M Id : 70-0708-4300-1GTIN(UPC/EAN) : 5 00 51138 66226 9
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Attenuation Tables - Data Sheet (PDF 85.4 K)
How to Use the Noise Reduction Rating (NRR) - Data Sheet (PDF 22.4 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Recommended for moderately high noise situations (up to 95 dBA TWA). Noise Reduction Rating: 25 dB* *Must see the Learn More Section - How to Use the NRR
Benefits
● Multi-flanged plugs fit securely into ear canal● Soft, elastic material conforms to a wide range of ear sizes comfortably● No need to roll plugs down before inserting● Ideal for dusty, dirty situations● Can be washed and reused many times for less waste
This assembly helps regulate the flow and temperature of the supplied air system. It helps keep the worker comfortable by cooling the air by up to 50°F (28°C). Includes the cooling tube, waist belt and holder.
3M Id : 70-0707-9901-3GTIN(UPC/EAN) : 0 00 51131 37018 0
Additional Information
Learn More . . .
Packaging Data
V-Series Air Control Devices User - Instructions/Manual (PDF 135.7 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Acid Gas Cartridge 6002 60/CaseNIOSH approved against certain acid gases. Use with 3M™ Half and Full Facepieces 6000 Series and 3M™ Half and Full Facepieces 7000 Series with bayonet style cartridge holders.
3M™ Ammonia Methylamine Cartridge 6004 60/CaseNIOSH approved against ammonia and methylamine. Use with 3M™ Half and Full Facepieces 6000 Series and 3M™ Half and Full Facepieces 7000 Series with bayonet style cartridge holders.
3M™ Formaldehyde/Organic Vapor Cartridge 6005 60/CaseNIOSH approved against formaldehyde and certain organic vapors. Use with 3M™ Half and Full Facepieces 6000 Series and 3M™ Half and Full Facepieces 7000 Series with bayonet style cartridge holders.
3M™ Multi Gas/Vapor Cartridge 6006 60/CaseNIOSH approved against certain organic vapors, acid gases, ammonia, methylamine or formaldehyde. Use with 3M™ Half and Full Facepieces 6000 Series and 3M™ Half and Full Facepieces 7000 Series with bayonet style cartridge holders.
3M™ Organic Vapor Cartridge 6001 60/CaseNIOSH approved against certain organic vapors. Use with 3M™ Half and Full Facepieces 6000 Series and 3M™ Half and Full Facepieces 7000 Series with bayonet style cartridge holders.
3M™ Organic Vapor Cartridge GVP-401 6/CaseThis cartridge is used with the 3M™ Belt-Mounted and Vehicle-Mounted Powered Air Purifying Respirator (PAPR) Systems. It attaches to the motor blower and filters the air supplied to the headgear.
3M™ Organic Vapor/Acid Gas Cartridge 6003/07047(AAD) 60/CaseNIOSH approved against certain organic vapors or acid gases. Use with 3M™ Half and Full Facepieces 6000 Series and 3M™ Half and Full Facepieces 7000 Series with bayonet style cartridge holders.
3M™ Organic Vapor/Acid Gas Cartridge GVP-403 6/CaseThis cartridge is used with the 3M™ Belt-Mounted and Vehicle-Mounted Powered Air Purifying Respirator (PAPR) Systems. It attaches to the motor blower and filters the air supplied to the headgear.
3M™ Organic Vapor/Acid Gas/High Efficiency Cartridge GVP-443 6/CaseThis cartridge is used with the 3M™ Belt-Mounted and Vehicle-Mounted Powered Air Purifying Respirator (PAPR) Systems. It attaches to the motor blower and filters the air supplied to the headgear.
http://products3.3m.com/catalog/ww/en001/mining/-/nod..._globalmining_3_0/command_AbcPageHandler/output_print (1 of 2)22/11/2006 11:48:29 AM
Product Catalog for 3M Mining Worker Safety Respiratory Cartridges
Printer-friendly format 3M™ Acid Gas Cartridge 6002 60/Case
[click to enlarge]
NIOSH approved against certain acid gases. Use with 3M™ Half and Full Facepieces 6000 Series and 3M™ Half and Full Facepieces 7000 Series with bayonet style cartridge holders.
3M Id : 70-0703-1676-8GTIN(UPC/EAN) : 5 00 51138 28880 3
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Warning - 5000, 6000, 7000 Series Cartridges - Info (PDF 19.0 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Use in a variety of applications including chemical manufacturing, glass etching, pulp and paper, and laboratories. When properly fitted, helps provide respiratory protection from chlorine, hydrogen chloride, sulfur dioxide, or chlorine dioxide, or hydrogen sulfide (escape only) at concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full
Product Catalog for 3M Mining Worker Safety Respiratory Cartridges
Printer-friendly format 3M™ Ammonia Methylamine Cartridge 6004 60/Case
[click to enlarge]
NIOSH approved against ammonia and methylamine. Use with 3M™ Half and Full Facepieces 6000 Series and 3M™ Half and Full Facepieces 7000 Series with bayonet style cartridge holders.
3M Id : 70-0703-1674-3GTIN(UPC/EAN) : 5 00 51138 28882 7
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
6004 Ammonia, Methylamine Cartridge User - Instructions/Manual (PDF 41.3 K)
Warning - 5000, 6000, 7000 Series Cartridges - Info (PDF 19.0 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Use in a variety of applications including agriculture, chemical manufacturing, laboratories and the food industry. When properly fitted, helps provide respiratory protection from ammonia and methylamine at concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim
Product Catalog for 3M Mining Worker Safety Respiratory Cartridges
Printer-friendly format 3M™ Formaldehyde/Organic Vapor Cartridge 6005 60/Case
[click to enlarge]
NIOSH approved against formaldehyde and certain organic vapors. Use with 3M™ Half and Full Facepieces 6000 Series and 3M™ Half and Full Facepieces 7000 Series with bayonet style cartridge holders.
3M Id : 70-0703-1673-5GTIN(UPC/EAN) : 5 00 51138 28883 4
Warning - 5000, 6000, 7000 Series Cartridges - Info (PDF 19.0 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Use in a variety of applications, including laboratories, wood processing, carpet manufacturing, and primary metals manufacturing. When properly fitted, helps provide respiratory protection from formaldehyde and certain organic vapors at concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be
Product Catalog for 3M Mining Worker Safety Respiratory Cartridges
Printer-friendly format 3M™ Multi Gas/Vapor Cartridge 6006 60/Case
[click to enlarge]
NIOSH approved against certain organic vapors, acid gases, ammonia, methylamine or formaldehyde. Use with 3M™ Half and Full Facepieces 6000 Series and 3M™ Half and Full Facepieces 7000 Series with bayonet style cartridge holders.
3M Id : 70-0707-0947-5GTIN(UPC/EAN) : 5 00 51138 54186 1
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
6006 Multi Gas, Vapor Cartridge User - Instructions/Manual (PDF 35.8 K)
Multi Gas and Vapor Cartridges - Fax on Demand (PDF 83.1 K)
Warning - 5000, 6000, 7000 Series Cartridges - Info (PDF 19.0 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Use in a variety of applications, including petrochemical and chemical processing, utilities, pharmaceuticals, mining and primary metals. When properly fitted, helps provide respiratory protection from certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide (escape only), ammonia, methylamine, formaldehyde or hydrogen fluoride at concentrations up
Product Catalog for 3M Mining Worker Safety Respiratory Cartridges
Printer-friendly format 3M™ Organic Vapor Cartridge 6001 60/Case
[click to enlarge]
NIOSH approved against certain organic vapors. Use with 3M™ Half and Full Facepieces 6000 Series and 3M™ Half and Full Facepieces 7000 Series with bayonet style cartridge holders.
3M Id : 70-0703-1677-6GTIN(UPC/EAN) : 5 00 51138 21674 5
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Warning - 5000, 6000, 7000 Series Cartridges - Info (PDF 19.0 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Use in a variety of workplace applications, including petrochemical, chemical manufacturing, construction, transportation and electronics. When properly fitted, helps provide respiratory protection from certain organic vapors at concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit
Product Catalog for 3M Mining Worker Safety Respiratory Cartridges
Printer-friendly format 3M™ Organic Vapor Cartridge GVP-401 6/Case
[click to enlarge]
This cartridge is used with the 3M™ Belt-Mounted and Vehicle-Mounted Powered Air Purifying Respirator (PAPR) Systems. It attaches to the motor blower and filters the air supplied to the headgear.
3M Id : 70-0705-1565-8GTIN(UPC/EAN) : 5 00 51138 29216 9
Product Catalog for 3M Mining Worker Safety Respiratory Cartridges
Printer-friendly format 3M™ Organic Vapor/Acid Gas Cartridge 6003/07047(AAD) 60/Case
[click to enlarge]
NIOSH approved against certain organic vapors or acid gases. Use with 3M™ Half and Full Facepieces 6000 Series and 3M™ Half and Full Facepieces 7000 Series with bayonet style cartridge holders.
3M Id : 70-0703-1675-0GTIN(UPC/EAN) : 5 00 51131 07047 4
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Warning - 5000, 6000, 7000 Series Cartridges - Info (PDF 19.0 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Use in a variety of applications, including pharmaceutical, petrochemical, utilities, aluminum reduction, chemical manufacturing, laboratories, and pulp and paper. When properly fitted, helps provide respiratory protection from certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, or hydrogen sulfide (escape only) or hydrogen fluoride at concentrations up to 10 times the
Product Catalog for 3M Mining Worker Safety Respiratory Cartridges
Printer-friendly format 3M™ Organic Vapor/Acid Gas Cartridge GVP-403 6/Case
[click to enlarge]
This cartridge is used with the 3M™ Belt-Mounted and Vehicle-Mounted Powered Air Purifying Respirator (PAPR) Systems. It attaches to the motor blower and filters the air supplied to the headgear.
3M Id : 70-0705-1567-4GTIN(UPC/EAN) : 5 00 51138 29218 3
Product Catalog for 3M Mining Worker Safety Respiratory Cartridges
Printer-friendly format 3M™ Organic Vapor/Acid Gas/High Efficiency Cartridge GVP-443 6/Case
[click to enlarge]
This cartridge is used with the 3M™ Belt-Mounted and Vehicle-Mounted Powered Air Purifying Respirator (PAPR) Systems. It attaches to the motor blower and filters the air supplied to the headgear.
3M Id : 70-0705-1571-6GTIN(UPC/EAN) : 5 00 51138 29222 0
Additional Information
Learn More . . .
Packaging Data
GVP-443 OV Cart Filter Line Art - Illustration/Line Art
http://products3.3m.com/catalog/ww/en001/mining/-/node_..._ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:49:44 AM
Select a Location
English
By Keyword
3M Global Mining : Filters
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Worker Safety Respiratory
Filters
[click to enlarge]
For use with 6000 and 7000 series respirators. Provides protection from solids, and liquid or oil based particles from sprays.
Make a Selection
3M™ High Efficiency Filter AS-140-5 5/CaseUsed on 3M™ Airstream™ High Efficiency Headgear System to help filter contaminants before the air reaches the workers breathing zone.
3M™ High Efficiency Filter GVP-440 8/CaseThis cartridge is used with the 3M™ Belt-Mounted and Vehicle-Mounted Powered Air Purifying Respirator (PAPR) Systems. It attaches to the motor blower and filters the air supplied to the headgear.
3M™ Particulate Filter 2091/07000(AAD), P100 100/CaseNIOSH approved for environments containing certain oil and non-oil based particles. Use with 3M™ Respirators 5000 Series or Cartridges 6000 Series with 3M™ Adapter 502, 3M™ Facepieces 6000 Series, or 3M™ Facepieces 7000 Series with bayonet filter holder.
3M™ Particulate Filter 2097/07184(AAD), P100, with Nuisance Level Organic Vapor Relief 100/CaseNIOSH approved for environments containing certain oil and non-oil based particles. 3M recommended for relief against of organic vapors and ozone protection up to 10 times OSHA PEL. Not NIOSH certified for use against ozone.
Product Catalog for 3M Mining Worker Safety Respiratory Filters
Printer-friendly format 3M™ High Efficiency Filter GVP-440 8/Case
[click to enlarge]
This cartridge is used with the 3M™ Belt-Mounted and Vehicle-Mounted Powered Air Purifying Respirator (PAPR) Systems. It attaches to the motor blower and filters the air supplied to the headgear.
3M Id : 70-0705-1568-2GTIN(UPC/EAN) : 5 00 51138 29219 0
Product Catalog for 3M Mining Worker Safety Respiratory Filters
Printer-friendly format 3M™ Particulate Filter 2091/07000(AAD), P100 100/Case
[click to enlarge]
NIOSH approved for environments containing certain oil and non-oil based particles. Use with 3M™ Respirators 5000 Series or Cartridges 6000 Series with 3M™ Adapter 502, 3M™ Facepieces 6000 Series, or 3M™ Facepieces 7000 Series with bayonet filter holder.
3M Id : 70-0706-1441-0GTIN(UPC/EAN) : 5 00 51131 07000 9
Particulate Filter 2091 or 07000, P100 - Fax on Demand (PDF 120.0 K)
Warning - 5000, 6000 Series Filters - Info (PDF 18.6 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
When properly fitted, use in a variety of applications including welding, brazing, torch cutting, metal pouring, soldering, and exposure to lead, asbestos, cadmium, arsenic, and MDA for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor
Product Catalog for 3M Mining Worker Safety Respiratory Filters
Printer-friendly format 3M™ Particulate Filter 2097/07184(AAD), P100, with Nuisance Level Organic Vapor Relief 100/Case
[click to enlarge]
NIOSH approved for environments containing certain oil and non-oil based particles. 3M recommended for relief against of organic vapors and ozone protection up to 10 times OSHA PEL. Not NIOSH certified for use against ozone.
3M Id : 70-0707-1094-5GTIN(UPC/EAN) : 5 00 51131 07184 6
Warning - 5000, 6000 Series Filters - Info (PDF 18.6 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Use with 3M™ Respirators 5000 Series or 3M™ Cartridge 6000 Series with 3M™ Adapter 502, 3M™ Facepieces 6000 Series or 3M™ Facepieces 7000 Series with bayonet filter holders. When properly fitted, use in a variety of applications including welding, brazing, torch cutting, metal pouring, soldering, and exposure to lead, asbestos, cadmium, arsenic, and MDA for concentrations up to 10 times the
http://products3.3m.com/catalog/ww/en001/mining/-/node_..._ww_globalmining_3_0/command_AbcPageHandler/output_html22/11/2006 11:50:24 AM
Select a Location
English
By Keyword
Email
Email
Email
Email
3M Global Mining : Respirators
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Worker Safety Respiratory
Respirators
[click to enlarge]
Includes: Particulate, half and full facepiece, and PAPR respirators.
Make a Selection
3M™ Airstream™ Headgear-Mounted Powered Air Purifying Respirator (PAPR) System AS-400LBC, Intrinsically Safe 1/CaseThis system is lightweight and comfortable. No breathing tubes or hoses are required. Positive pressure helps keep out particles, and keep the faceshield fog-free.
Full Facpiece RespiratorUse with 3M™ Filters 2000 Series, 3M™ Filter 7093, P100, 3M™ Cartridges 6000 Series, or 3M™ Dual Airline Systems against a variety of gases, vapors and particulate hazards according to NIOSH approvals.
Half Facepiece RespiratorUse with 3M™ Filters 2000 Series, 3M™ Filter 7093, P100, 3M™ Cartridges 6000 Series, or 3M™ Dual Airline Systems against a variety of gases, vapors and particulate hazards according to NIOSH approvals.
Particulate RespiratorsUse 3M respirators to protect from dust and acid/gas particles and organic vapours.
Product Catalog for 3M Mining Worker Safety Respiratory Respirators
Printer-friendly format 3M™ Airstream™ Headgear-Mounted Powered Air Purifying Respirator (PAPR) System AS-400LBC, Intrinsically Safe 1/Case
[click to enlarge]
This system is lightweight and comfortable. No breathing tubes or hoses are required. Positive pressure helps keep out particles, and keep the faceshield fog-free.
3M Id : 70-0708-4591-5GTIN(UPC/EAN) : 0 00 51138 76559 0
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
061-44-01R01 Airflow Indicator User - Instructions/Manual (PDF 17.4 K)
Product Catalog for 3M Mining Worker Safety Respiratory Respirators
Printer-friendly format Full Facpiece Respirator
[click to enlarge]
Use with 3M™ Filters 2000 Series, 3M™ Filter 7093, P100, 3M™ Cartridges 6000 Series, or 3M™ Dual Airline Systems against a variety of gases, vapors and particulate hazards according to NIOSH approvals.
Make a Selection
3M™ Full Facepiece 6700, Small 4/CaseUse with 3M™ Filters 2000 Series, 3M™ Filter 7093 P100, 3M™ Cartridges 6000 Series, or 3M™ Dual Airline Systems against a variety of gases, vapors and particulate hazards according to NIOSH approvals.
3M™ Full Facepiece 6800, Medium 4/CaseUse with 3M™ Filters 2000 Series, 3M™ Filter 7093, P100, 3M™ Cartridges 6000 Series, or 3M™ Dual Airline Systems against a variety of gases, vapors and particulate hazards according to NIOSH approvals.
3M™ Full Facepiece 6900, Large 4/CaseUse with3M™ Filters 2000 Series, 3M™ Filter 7093, P100, 3M™ Cartridges 6000 Series, or 3M™ Dual Airline Systems against a variety of gases, vapors and particulate hazards according to NIOSH approvals.
Product Catalog for 3M Mining Worker Safety Respiratory Respirators
Printer-friendly format Half Facepiece Respirator
[click to enlarge]
Use with 3M™ Filters 2000 Series, 3M™ Filter 7093, P100, 3M™ Cartridges 6000 Series, or 3M™ Dual Airline Systems against a variety of gases, vapors and particulate hazards according to NIOSH approvals.
Make a Selection
3M™ Half Facepiece 6100/07024(AAD), Small 24/CaseUse with 3M™ Filters 2000 Series, 3M™ Filter 7093, P100, 3M™ Cartridges 6000 Series, or 3M™ Dual Airline Systems against a variety of gases, vapors and particulate hazards according to NIOSH approvals.
3M™ Half Facepiece 6200/07025(AAD), Medium 24/CaseUse with 3M™ Filters 2000 Series, 3M™ Filter 7093, P100, 3M™ Cartridges 6000 Series, or 3M™ Dual Airline Systems against a variety of gases, vapors and particulate hazards according to NIOSH approvals.
3M™ Half Facepiece 6300/07026(AAD), Large 24/CaseUse with 3M™ Filters 2000 Series, 3M™ Filter 7093, P100, 3M™ Cartridges 6000 Series, or 3M™ Dual Airline Systems against a variety of gases, vapors and particulate hazards according to NIOSH approvals.
Product Catalog for 3M Mining Worker Safety Respiratory Respirators
Printer-friendly format Particulate Respirators
[click to enlarge]
Use 3M respirators to protect from dust and acid/gas particles and organic vapours.
Make a Selection
3M™ Particulate Respirator 8210, N95 160/CaseIs designed to help provide comfortable, reliable worker protection against certain non-oil based particles. Its lightweight construction helps promote greater worker acceptance and comfort and increased wear time.
3M™ Particulate Respirator 8214, N95, with Faceseal and Nuisance Level Organic Vapor Relief 80/CaseIs designed for applications such as welding, soldering and other operations where metal fumes may be present including those with ozone* and nuisance level** organic vapors.
3M™ Particulate Respirator 8233, N100 20/CaseIs well suited for those who want NIOSHs highest rated filtration efficiency in a maintenance free respirator. It provides a minimum filter efficiency of 99.97% against non-oil based particles.
3M™ Particulate Respirator 8246, R95, with Nuisance Level Acid Gas Relief 120/CaseHelps provide protection against certain oil and non-oil based aerosol particles including those present with nuisance levels of acid gases such as sulphur dioxide, hydrogen fluoride, and/or chlorine.
3M™ Particulate Respirator 8514, N95, with Nuisance Level Organic Vapor Relief 80/CaseDesigned for applications such as welding, soldering and other operations where metal fumes are present including those with ozone and nuisance level organic vapors.
3M™ Particulate Respirator 8576, P95, with Nuisance Level Acid Gas Relief 80/CaseDesigned to provide comfortable, reliable worker protection against certain oil and non-oil based aerosol particles including those present with nuisance levels of acid gases such as sulphur dioxide, hydrogen fluoride, and/or chlorine.
3M™ Particulate Welding Respirator 8212, N95, with Faceseal 80/CaseIs designed for applications such as welding, soldering and other operations where metal fumes may be present.
3M™ Particulate Welding Respirator 8512, N95 80/CaseIs designed for applications such as welding, soldering and other operations where metal fumes are present.
http://products3.3m.com/catalog/ww/en001/mining/-/nod...w_globalmining_3_0/command_AbcPageHandler/output_html (1 of 2)22/11/2006 11:51:09 AM
http://products3.3m.com/catalog/ww/en001/mining/-/node_GS...almining_3_0/command_PackagingOutlinkHandler/output_print22/11/2006 11:51:38 AM
Select a Location
English
3M Global Mining : 3M™ Cable Preparation Kit CC-3
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Electrical Solutions Cable Cleaning System CC-Series
3M™ Cable Preparation Kit CC-3
[click to enlarge]
These specialized pads clean cable insulation, metal, electrical, and mechanical parts. It comes with three (3) CC-4 saturated pads per kit and has a case quantity of 10.
3M Id : 80-6105-9300-8GTIN(UPC/EAN) : 0 00 54007 49564 2
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
KIT IN A CAN CONTAINS CLEANING MATERIALS TO PREPARE A NORMAL SYNTHETIC CABLE FOR SPLICING OR TERMINATING. CC-3 CABLE CLEANING PAD
http://products3.3m.com/catalog/ww/en001/mining/-/node_GS...almining_3_0/command_PackagingOutlinkHandler/output_print22/11/2006 11:52:27 AM
Select a Location
English
3M Global Mining : Cold Shrink Mine Splice
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Electrical Solutions Electrical Splices
Cold Shrink Mine Splice
[click to enlarge]
A complete kit designed for splicing type SHD-GC three-conductor shielded cables up to 15kV, on draglines, power shovels, drills, and type MPF underground power feeder cables and select trailing cables. Each kit contains: Cold Shrink insulation tubes; Scotchcast™ 2130 jacketing compound; cable cleaning and shielding materials. Order connectors separately.
http://products3.3m.com/catalog/ww/en001/mining/-/node_G...almining_3_0/command_PackagingOutlinkHandler/output_html22/11/2006 11:54:22 AM
Select a Location
English
By Keyword
3M Global Mining : Pigtail Motor Lead Splicing Kits
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Electrical Solutions Electrical Splices
Pigtail Motor Lead Splicing Kits
[click to enlarge]
Designed to splice feeder and motor lead cables, each kit contains 3 splices. Splices can be re-entered, and pigtail may be re-used.
Make a Selection
3M™ Motor Lead Pigtail Splice 5300Each kit makes three splices. Lugs not included in kits. Feeder of 14-10 AWG (2,5-4 sq mm), motor lead 16-12 AWG (1,5-2,5 sq mm).
3M™ Motor Lead Pigtail Splice 53015300 Series of kits are designed for splicing motor lead cables to incoming feeder cables
3M™ Motor Lead Pigtail Splice 5302Each kit makes three splices. Lugs not included in kits. Feeder of 2-1/0 AWG (35-50 sq mm), motor lead 4-1/0 AWG (25-50 sq mm).
3M™ Motor Lead Pigtail Splice Kit 5304Each kit makes three splices. Lugs not included in kits. Feeder of 250-500 kcmil (150-240 sq mm), motor lead 16-12 AWG (1,5-2,5 sq mm).
3M™ Motor Lead Splicing Kit 5322, 5KV & 8KV PigtailEach kit makes three splices. Lugs not included in kits. Feeder of 2-1/0 AWG (35-50 sq mm), motor lead 4-1/0 AWG (25-50 sq mm).
3M™ Motor Lead Splicing Kit 5324, 5KV & 8KV PigtailEach kit makes three splices. Lugs not included in kits. Feeder of 250-500 kcmil (150-240 sq mm), motor lead 4/0 AWG-500 kcmil (120-240 sq mm).
http://products3.3m.com/catalog/ww/en001/mining/-/node_G...almining_3_0/command_PackagingOutlinkHandler/output_html22/11/2006 11:57:20 AM
Select a Location
English
By Keyword
3M Global Mining : Scotch™ 23 Rubber Splicing Tape
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Electrical Solutions Electrical Tape
Scotch™ 23 Rubber Splicing Tape
[click to enlarge]
Scotch® 23 Rubber Splicing Tape is used in primary electrical insulation for splicing all solid dielectric cables through 69 kV.
Make a Selection
Scotch® Rubber Splicing Tape 23-1-1/2x30FT, 1 1/2 in x 30 ft (38 mm x 9,1 m), 50 per caseThis is a highly conformable, self-fusing Ethylene Propylene Rubber (EPR) based high-insulating voltage tape. Packed 1 roll per box with 10 per carton and 50 per case.
Scotch® Rubber Splicing Tape 23-3/4x30FT, 3/4 in x 30 ft (19 mm x 9,1 m), 50 per caseThis is a highly conformable, self-fusing Ethylene Propylene Rubber (EPR) based high-insulating voltage tape. Packed 1 roll per box with 50 per case.
Printer-friendly format Scotch® Rubber Splicing Tape 23-1-1/2x30FT, 1 1/2 in x 30 ft (38 mm x 9,1 m), 50 per case
[click to enlarge]
This is a highly conformable, self-fusing Ethylene Propylene Rubber (EPR) based high-insulating voltage tape. Packed 1 roll per box with 10 per carton and 50 per case.
3M Id : VE-0000-2832-8GTIN(UPC/EAN) : 0 00 54007 11214 3
Scotch® Rubber Splicing Tape 23-1-1/2x30FT, 1 1/2 in x 30 ft (38 mm x 9,1 m), 50 per case
[click to enlarge]
This is a highly conformable, self-fusing Ethylene Propylene Rubber (EPR) based high-insulating voltage tape. Packed 1 roll per box with 10 per carton and 50 per case.
3M Id : VE-0000-2832-8GTIN(UPC/EAN) : 0 00 54007 11214 3
http://products3.3m.com/catalog/ww/en001/mining/-/node_G..._0/command_ImageOutlinkHandler/output_html/imageid_5550022/11/2006 11:58:58 AM
Select a Location
English
By Keyword
3M Global Mining : Super 88 Scotch™ Vinyl Electrical Tape
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Electrical Solutions Electrical Tape
Super 88 Scotch™ Vinyl Electrical Tape
[click to enlarge]
This black, 8.5 mil heavy duty, premium grade all-weather vinyl electrical insulating tape maintains conformability for cold weather applications.
Make a Selection
Scotch® Premium Vinyl Electrical Tape 88-Super-2x36YD, 2 in x 36 yd (51mm x 32,9 m), 12 per caseThis black, 8.5 mil heavy duty, premium grade all-weather vinyl electrical insulating tape maintains conformability for cold weather applications. Inner pack of 1 per box, 12 per carton.
Scotch® Premium Vinyl Electrical Tape 88-Super-3/4x66FT, 3/4 in x 66 ft (19 mm x 20,1 m), 100 per caseOn a 1 inch core, this black, 8.5 mil heavy duty, premium grade all-weather vinyl electrical insulating tape maintains conformability for cold weather applications. Inner pack of 1 per canister, 10 per carton with 100 rolls per case.
Product Catalog for 3M Mining Electrical Solutions Electrical Tape Super 88 Scotch™ Vinyl Electrical
Tape
Printer-friendly format Scotch® Premium Vinyl Electrical Tape 88-Super-2x36YD, 2 in x 36 yd (51mm x 32,9 m), 12 per case
[click to enlarge]
This black, 8.5 mil heavy duty, premium grade all-weather vinyl electrical insulating tape maintains conformability for cold weather applications. Inner pack of 1 per box, 12 per carton.
3M Id : 80-6108-3388-3GTIN(UPC/EAN) : 0 00 54007 10356 1
Additional Information
Learn More . . .
Packaging Data
3M™ Scotch® Super 88 Vinyl Electrical Tape - Data Sheet (PDF 14.6 K)
Ordering Information for Scotch Super 88 Vinyl Electrical Tape - Product Selection Guide (HTML 4.4 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Scotch® Premium Vinyl Electrical Tape Super 88 offers better mechanical/abrasion resistance, and is thicker for quicker build-up. For professional use, this tape combines the flexibility of a PVC backing with excellent electrical insulating properties to provide primary electrical insulation for splices up to 600V and protective jacketing. UL Listed and CSA Certified. Excellent resistance to UV
http://products3.3m.com/catalog/ww/en001/mining/-/nod...w_globalmining_3_0/command_AbcPageHandler/output_html (1 of 2)22/11/2006 11:59:22 AM
Select a Location
English
By Keyword
Email
Email
Email
3M Global Mining : Scotch® Premium Vinyl Electrical Tape 88-Super-2x36YD, 2 in x 36 yd (51mm x 32,9 m), 12 per case
http://products3.3m.com/catalog/ww/en001/mining/-/nod...w_globalmining_3_0/command_AbcPageHandler/output_html (2 of 2)22/11/2006 11:59:22 AM
3M Global Mining : Scotch® Premium Vinyl Electrical Tape 88-Super-2x36YD, 2 in x 36 yd (51mm x 32,9 m), 12 per case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Electrical Solutions Electrical Tape Super 88 Scotch™ Vinyl Electrical
Tape
Scotch® Premium Vinyl Electrical Tape 88-Super-2x36YD, 2 in x 36 yd (51mm x 32,9 m), 12 per case
[click to enlarge]
This black, 8.5 mil heavy duty, premium grade all-weather vinyl electrical insulating tape maintains conformability for cold weather applications. Inner pack of 1 per box, 12 per carton.
3M Id : 80-6108-3388-3GTIN(UPC/EAN) : 0 00 54007 10356 1
Additional Information
Learn More . . .
Packaging Data
3M™ Scotch® Super 88 Vinyl Electrical Tape - Data Sheet (PDF 14.6 K)
Ordering Information for Scotch Super 88 Vinyl Electrical Tape - Product Selection Guide (HTML 4.4 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Scotch® Premium Vinyl Electrical Tape Super 88 offers better mechanical/abrasion resistance, and is thicker for quicker build-up. For professional use, this tape combines the flexibility of a PVC backing with excellent electrical insulating properties to provide primary electrical insulation for splices up to 600V and protective jacketing. UL Listed and CSA Certified. Excellent resistance to UV
Product Catalog for 3M Mining Electrical Solutions Electrical Tape Super 88 Scotch™ Vinyl Electrical
Tape Scotch® Premium Vinyl Electrical Tape 88-Super-2x36YD, 2 in x 36 yd (51mm x 32,9 m), 12 per
case
Scotch® Premium Vinyl Electrical Tape 88-Super-2x36YD, 2 in x 36 yd (51mm x 32,9 m), 12 per case
Printer-friendly
format
Additional Information
Scotch® Premium Vinyl Electrical Tape Super 88 offers better mechanical/abrasion resistance, and is thicker for quicker build-up. For professional use, this tape combines the flexibility of a PVC backing with excellent electrical insulating properties to provide primary electrical insulation for splices up to 600V and protective jacketing. UL Listed and CSA Certified. Excellent resistance to UV rays, abrasion, moisture, copper corrosion, alkalis and acids. Excellent all-weather performance in cold to 0°F (-18°C) or hot to 220°F (105°C)
Product Catalog for 3M Mining Electrical Solutions Electrical Tape Super 88 Scotch™ Vinyl Electrical
Tape
Printer-friendly format Scotch® Premium Vinyl Electrical Tape 88-Super-3/4x66FT, 3/4 in x 66 ft (19 mm x 20,1 m), 100 per case
[click to enlarge]
On a 1 inch core, this black, 8.5 mil heavy duty, premium grade all-weather vinyl electrical insulating tape maintains conformability for cold weather applications. Inner pack of 1 per canister, 10 per carton with 100 rolls per case.
3M Id : 80-6108-3386-7GTIN(UPC/EAN) : 0 00 54007 06143 4
Additional Information
Learn More . . .
Packaging Data
3M™ Scotch® Super 88 Vinyl Electrical Tape - Data Sheet (PDF 14.6 K)
Ordering Information for Scotch Super 88 Vinyl Electrical Tape - Product Selection Guide (HTML 4.4 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Scotch® Premium Vinyl Electrical Tape Super 88 offers better mechanical/abrasion resistance, and is thicker for quicker build-up. For professional use, this tape combines the flexibility of a PVC backing with excellent electrical insulating properties to provide primary electrical insulation for splices up to 600V and protective jacketing. UL Listed and CSA Certified. Excellent resistance to UV
Full Text . . .
Characteristics
Color BlackLength 66 Linear Foot Primary Trademark Name Scotch
Thickness 8.5 Milli-inch (Mil) Width 3/4 Inch
http://products3.3m.com/catalog/ww/en001/mining/-/nod...w_globalmining_3_0/command_AbcPageHandler/output_html (1 of 2)22/11/2006 12:00:32 PM
Select a Location
English
By Keyword
Email
Email
Email
3M Global Mining : Scotch® Premium Vinyl Electrical Tape 88-Super-3/4x66FT, 3/4 in x 66 ft (19 mm x 20,1 m), 100 per case
http://products3.3m.com/catalog/ww/en001/mining/-/nod...w_globalmining_3_0/command_AbcPageHandler/output_html (2 of 2)22/11/2006 12:00:32 PM
3M Global Mining : Scotch® Premium Vinyl Electrical Tape 88-Super-3/4x66FT, 3/4 in x 66 ft (19 mm x 20,1 m), 100 per case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Electrical Solutions Electrical Tape Super 88 Scotch™ Vinyl Electrical
Tape
Scotch® Premium Vinyl Electrical Tape 88-Super-3/4x66FT, 3/4 in x 66 ft (19 mm x 20,1 m), 100 per case
[click to enlarge]
On a 1 inch core, this black, 8.5 mil heavy duty, premium grade all-weather vinyl electrical insulating tape maintains conformability for cold weather applications. Inner pack of 1 per canister, 10 per carton with 100 rolls per case.
3M Id : 80-6108-3386-7GTIN(UPC/EAN) : 0 00 54007 06143 4
Additional Information
Learn More . . .
Packaging Data
3M™ Scotch® Super 88 Vinyl Electrical Tape - Data Sheet (PDF 14.6 K)
Ordering Information for Scotch Super 88 Vinyl Electrical Tape - Product Selection Guide (HTML 4.4 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Scotch® Premium Vinyl Electrical Tape Super 88 offers better mechanical/abrasion resistance, and is thicker for quicker build-up. For professional use, this tape combines the flexibility of a PVC backing with excellent electrical insulating properties to provide primary electrical insulation for splices up to 600V and protective jacketing. UL Listed and CSA Certified. Excellent resistance to UV
Full Text . . .
Characteristics
Color BlackLength 66 Linear Foot Primary Trademark Name Scotch
Thickness 8.5 Milli-inch (Mil) Width 3/4 Inch
http://products3.3m.com/catalog/ww/en001/mining/-/nod..._globalmining_3_0/command_AbcPageHandler/output_print (1 of 2)22/11/2006 12:00:41 PM
Select a Location
English
Email
Email
Email
3M Global Mining : Scotch® Premium Vinyl Electrical Tape 88-Super-3/4x66FT, 3/4 in x 66 ft (19 mm x 20,1 m), 100 per case
Product Catalog for 3M Mining Electrical Solutions Electrical Tape Super 88 Scotch™ Vinyl Electrical
Tape Scotch® Premium Vinyl Electrical Tape 88-Super-3/4x66FT, 3/4 in x 66 ft (19 mm x 20,1 m), 100
per case
Scotch® Premium Vinyl Electrical Tape 88-Super-3/4x66FT, 3/4 in x 66 ft (19 mm x 20,1 m), 100 per case
Printer-friendly
format
Additional Information
Scotch® Premium Vinyl Electrical Tape Super 88 offers better mechanical/abrasion resistance, and is thicker for quicker build-up. For professional use, this tape combines the flexibility of a PVC backing with excellent electrical insulating properties to provide primary electrical insulation for splices up to 600V and protective jacketing. UL Listed and CSA Certified. Excellent resistance to UV rays, abrasion, moisture, copper corrosion, alkalis and acids. Excellent all-weather performance in cold to 0°F (-18°C) or hot to 220°F (105°C)
3M Global Mining : Cold Shrink QT-III Indoor Termination
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Electrical Solutions Electrical Terminations
Cold Shrink QT-III Indoor Termination
[click to enlarge]
Easy to install, silicone rubber termination, that requires no grease or silicone tape. Superior track and erosion resistance, with outstanding UV stability. Not heat, flames, or special tools required.
Make a Selection
3M™ Cold Shrink QT-III Termination Kit 7620-T-95, Non-Skirted, 0.32-0.59 in (8,2-15,0 mm) Cable Insulation O.D.This QT-III has a BIL rating of 95 kV and is suitable for use on 5 and 8.7 kV cables. 3 terminations per kit.
3M™ Cold Shrink QT-III Termination Kit 7621-T-95, Non-Skirted, 0.44-0.89 in (11,2-22,7mm) Cable Insulation O.D.This QT-III has a BIL rating of 95kV and is suitable for use on 5 and 8.7 kV cables. 3 terminations per kit.
3M™ Cold Shrink QT-III Termination Kit 7622-T-110, Non-Skirted, 0.64-1.08 in (16,3-27,4 mm) Cable Insulation O.D.This QT-III has a BIL rating of 110 kV and is suitable for use on 5, 8.7 and 15 kV cables. 3 terminations per kit.
3M™ Cold Shrink QT-III Termination Kit 7624-T-110, Non-Skirted, 0.83-1.53 in (21,1-38,9 mm) Cable Insulation O.D.This QT-III has a BIL rating of 110 kV and is suitable for use on 5, 8.7 and 15 kV cables. 3 terminations per kit.
3M™ Cold Shrink QT-III Termination Kit 7625-T-110, Non-Skirted, 1.05-1.80 in (26,7-45,7 mm) Cable Insulation O.D.This QT-III has a BIL rating of 110 kV and is suitable for use on 5, 8.7 and 15 kV cables. 3 terminations per kit.
3M™ Cold Shrink QT-III Termination Kit 7626-T-110, Non-Skirted, 1.53-2.32 in (38,9-58,9 mm) Cable Insulation O.D.This QT-III has a BIL rating of 110 kV and is suitable for use on 5, 8.7 and 15 kV cables. 3 terminations per kit.
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Cold Shrink QT-III terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design delivers
Full Text . . .
CharacteristicsPrimary Trademark Name 3M
http://products3.3m.com/catalog/ww/en001/mining/-/nod...w_globalmining_3_0/command_AbcPageHandler/output_html (1 of 2)22/11/2006 12:01:39 PM
Select a Location
English
By Keyword
Email
Email
Email
Email
Email
3M Global Mining : 3M™ Cold Shrink QT-III Termination Kit 7620-T-95, Non-Skirted, 0.32-0.59 in (8,2-15,0 mm) Cable Insulation O.D.
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Cold Shrink QT-III terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design delivers
Full Text . . .
CharacteristicsPrimary Trademark Name 3M
http://products3.3m.com/catalog/ww/en001/mining/-/nod..._globalmining_3_0/command_AbcPageHandler/output_print (1 of 2)22/11/2006 12:01:46 PM
Select a Location
English
Email
Email
Email
Email
Email
3M Global Mining : 3M™ Cold Shrink QT-III Termination Kit 7620-T-95, Non-Skirted, 0.32-0.59 in (8,2-15,0 mm) Cable Insulation O.D.
3M™ Cold Shrink QT-III terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design delivers excellent BIL performance and lower surface stress resulting in a more compact termination. Through superior engineering, 3M™ Cold Shrink QT-III terminations deliver maximum performance.
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Cold Shrink QT-III terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design delivers
Full Text . . .
CharacteristicsPrimary Trademark Name 3M
http://products3.3m.com/catalog/ww/en001/mining/-/nod...w_globalmining_3_0/command_AbcPageHandler/output_html (1 of 2)22/11/2006 12:02:13 PM
Select a Location
English
By Keyword
Email
Email
Email
Email
Email
3M Global Mining : 3M™ Cold Shrink QT-III Termination Kit 7621-T-95, Non-Skirted, 0.44-0.89 in (11,2-22,7mm) Cable Insulation O.D.
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Cold Shrink QT-III terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design delivers
Full Text . . .
CharacteristicsPrimary Trademark Name 3M
http://products3.3m.com/catalog/ww/en001/mining/-/nod..._globalmining_3_0/command_AbcPageHandler/output_print (1 of 2)22/11/2006 12:02:21 PM
Select a Location
English
Email
Email
Email
Email
Email
3M Global Mining : 3M™ Cold Shrink QT-III Termination Kit 7621-T-95, Non-Skirted, 0.44-0.89 in (11,2-22,7mm) Cable Insulation O.D.
3M™ Cold Shrink QT-III terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design delivers excellent BIL performance and lower surface stress resulting in a more compact termination. Through superior engineering, 3M™ Cold Shrink QT-III terminations deliver maximum performance.
QT-III 7620-T-110 Series Kits - Instructions/Manual (PDF 283.3 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Cold Shrink QT-III terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design delivers
Full Text . . .
CharacteristicsPrimary Trademark Name 3M
http://products3.3m.com/catalog/ww/en001/mining/-/nod...w_globalmining_3_0/command_AbcPageHandler/output_html (1 of 2)22/11/2006 12:02:49 PM
Select a Location
English
By Keyword
Email
Email
Email
Email
Email
Email
3M Global Mining : 3M™ Cold Shrink QT-III Termination Kit 7622-T-110, Non-Skirted, 0.64-1.08 in (16,3-27,4 mm) Cable Insulation O.D.
QT-III 7620-T-110 Series Kits - Instructions/Manual (PDF 283.3 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Cold Shrink QT-III terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design delivers
Full Text . . .
CharacteristicsPrimary Trademark Name 3M
http://products3.3m.com/catalog/ww/en001/mining/-/nod..._globalmining_3_0/command_AbcPageHandler/output_print (1 of 2)22/11/2006 12:02:58 PM
Select a Location
English
Email
Email
Email
Email
Email
Email
3M Global Mining : 3M™ Cold Shrink QT-III Termination Kit 7622-T-110, Non-Skirted, 0.64-1.08 in (16,3-27,4 mm) Cable Insulation O.D.
3M™ Cold Shrink QT-III terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design delivers excellent BIL performance and lower surface stress resulting in a more compact termination. Through superior engineering, 3M™ Cold Shrink QT-III terminations deliver maximum performance.
QT-III 7620-T-110 Series Kits - Instructions/Manual (PDF 283.3 K)
QT-III 7640-T-110 Series Kits - Instruction Sheet (PDF 167.8 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Cold Shrink QT-III terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design delivers
Full Text . . .
CharacteristicsPrimary Trademark Name 3M
http://products3.3m.com/catalog/ww/en001/mining/-/nod...w_globalmining_3_0/command_AbcPageHandler/output_html (1 of 2)22/11/2006 12:03:23 PM
Select a Location
English
By Keyword
Email
Email
Email
Email
Email
Email
3M Global Mining : 3M™ Cold Shrink QT-III Termination Kit 7624-T-110, Non-Skirted, 0.83-1.53 in (21,1-38,9 mm) Cable Insulation O.D.
QT-III 7620-T-110 Series Kits - Instructions/Manual (PDF 283.3 K)
QT-III 7640-T-110 Series Kits - Instruction Sheet (PDF 167.8 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Cold Shrink QT-III terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design delivers
Full Text . . .
CharacteristicsPrimary Trademark Name 3M
http://products3.3m.com/catalog/ww/en001/mining/-/nod..._globalmining_3_0/command_AbcPageHandler/output_print (1 of 2)22/11/2006 12:03:34 PM
Select a Location
English
Email
Email
Email
Email
Email
Email
3M Global Mining : 3M™ Cold Shrink QT-III Termination Kit 7624-T-110, Non-Skirted, 0.83-1.53 in (21,1-38,9 mm) Cable Insulation O.D.
3M™ Cold Shrink QT-III terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design delivers excellent BIL performance and lower surface stress resulting in a more compact termination. Through superior engineering, 3M™ Cold Shrink QT-III terminations deliver maximum performance.
QT-III 7620-T-110 Series Kits - Instructions/Manual (PDF 283.3 K)
QT-III 7640-T-110 Series Kits - Instruction Sheet (PDF 167.8 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Cold Shrink QT-III terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design delivers
Full Text . . .
CharacteristicsPrimary Trademark Name 3M
http://products3.3m.com/catalog/ww/en001/mining/-/nod...w_globalmining_3_0/command_AbcPageHandler/output_html (1 of 2)22/11/2006 12:04:06 PM
Select a Location
English
By Keyword
Email
Email
Email
Email
Email
Email
3M Global Mining : 3M™ Cold Shrink QT-III Termination Kit 7625-T-110, Non-Skirted, 1.05-1.80 in (26,7-45,7 mm) Cable Insulation O.D.
QT-III 7620-T-110 Series Kits - Instructions/Manual (PDF 283.3 K)
QT-III 7640-T-110 Series Kits - Instruction Sheet (PDF 167.8 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Cold Shrink QT-III terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design delivers
Full Text . . .
CharacteristicsPrimary Trademark Name 3M
http://products3.3m.com/catalog/ww/en001/mining/-/nod..._globalmining_3_0/command_AbcPageHandler/output_print (1 of 2)22/11/2006 12:04:16 PM
Select a Location
English
Email
Email
Email
Email
Email
Email
3M Global Mining : 3M™ Cold Shrink QT-III Termination Kit 7625-T-110, Non-Skirted, 1.05-1.80 in (26,7-45,7 mm) Cable Insulation O.D.
3M™ Cold Shrink QT-III terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design delivers excellent BIL performance and lower surface stress resulting in a more compact termination. Through superior engineering, 3M™ Cold Shrink QT-III terminations deliver maximum performance.
QT-III 7620-T-110 Series Kits - Instructions/Manual (PDF 283.3 K)
QT-III 7650-T-HSG-150 Series - Instruction Sheet (PDF 236.6 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Cold Shrink QT-III terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design delivers
Full Text . . .
CharacteristicsPrimary Trademark Name 3M
http://products3.3m.com/catalog/ww/en001/mining/-/nod...w_globalmining_3_0/command_AbcPageHandler/output_html (1 of 2)22/11/2006 12:04:42 PM
Select a Location
English
By Keyword
Email
Email
Email
Email
Email
Email
3M Global Mining : 3M™ Cold Shrink QT-III Termination Kit 7626-T-110, Non-Skirted, 1.53-2.32 in (38,9-58,9 mm) Cable Insulation O.D.
QT-III 7620-T-110 Series Kits - Instructions/Manual (PDF 283.3 K)
QT-III 7650-T-HSG-150 Series - Instruction Sheet (PDF 236.6 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Cold Shrink QT-III terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design delivers
Full Text . . .
CharacteristicsPrimary Trademark Name 3M
http://products3.3m.com/catalog/ww/en001/mining/-/nod..._globalmining_3_0/command_AbcPageHandler/output_print (1 of 2)22/11/2006 12:04:51 PM
Select a Location
English
Email
Email
Email
Email
Email
Email
3M Global Mining : 3M™ Cold Shrink QT-III Termination Kit 7626-T-110, Non-Skirted, 1.53-2.32 in (38,9-58,9 mm) Cable Insulation O.D.
3M™ Cold Shrink QT-III terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design delivers excellent BIL performance and lower surface stress resulting in a more compact termination. Through superior engineering, 3M™ Cold Shrink QT-III terminations deliver maximum performance.
3M Global Mining : Cold Shrink QT-III Outdoor Skirted Terminations
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Electrical Solutions Electrical Terminations
Cold Shrink QT-III Outdoor Skirted Terminations
[click to enlarge]
Cold Shrink QT-III Outdoor terminations offer easy installation and reliable performance when terminating outdoor medium voltage cable.
Make a Selection
3M™ Cold Shrink QT-III Outdoor 2 Skirt Termination 7620-S-2, .32-.59 in (8,1-15,0 mm) Cable Insulation O.D.This QT-III has a BIL rating of 200 kV suitable for use on 5, 8.7, 15, 25/28, and 35 kV cables. 3 terminations per kit.
3M™ Cold Shrink QT-III Outdoor 2 Skirt Termination 7621-S-2, 0.44-0.89 in (11,2-22,7 mm) Cable Insulation O.D.This QT-III has a BIL rating of 95 kV and is suitable for use on 5 and 8.7 kV cables. 3 terminations per kit.
3M™ Cold Shrink QT-III Outdoor 2 Skirt Termination 7622-S-2, 0.64-1.08 in (16,3-27,4 mm) Cable Insulation O.D.This QT-III has a BIL rating of 110 kV suitable for use on 5, 8.7 and 15 kV cables. 3 terminations per kit.
3M™ Cold Shrink QT-III Outdoor 4 Skirt Termination 7692-S-4, 0.64-1.08 in (16,3-27,4 mm) Cable Insulation O.D.This QT-III has a BIL rating of 150 kV suitable for use on 5, 8.7, 15 and 25/28 kV cables. 3 terminations per kit.
3M™ Cold Shrink QT-III Outdoor 4 Skirt Termination 7693-S-4, 0.72-1.29 in (18,3-32,8 mm) Cable Insulation O.D.This QT-III has a BIL rating of 150 kV suitable for use on 5, 8.7, 15 and 25/28 kV cables. 3 terminations per kit.
3M™ Cold Shrink QT-III Outdoor 4 Skirt Termination 7694-S-4, 0.83-1.53 in (38,9-58,9 mm) Cable Insulation O.D.This QT-III has a BIL rating of 150 kV suitable for use on 5, 8.7, 15 and 25/28 kV cables. 3 terminations per kit.
3M™ Cold Shrink QT-III Outdoor 4 Skirt Termination 7696-S-4, 1.53-2.32 in (21,1-38,9 mm) Cable Insulation O.D.This QT-III has a BIL rating of 150 kV suitable for use on 5, 8.7, 15 and 25/28 kV cables. 3 terminations per kit..
3M™ Cold Shrink QT-III Outdoor 8 Skirt Termination 7683-S-8, 0.72-1.29 in (18,3-32,8 mm) Cable Insulation O.D., 3 per kitThis QT-III has a BIL rating of 200 kV suitable for use on 5, 8.7, 15, 25/28, and 35 kV cables. 3 terminations per kit.
http://products3.3m.com/catalog/ww/en001/mining/-/nod..._globalmining_3_0/command_AbcPageHandler/output_print (1 of 2)22/11/2006 12:05:22 PM
Select a Location
English
3M Global Mining : Cold Shrink QT-III Outdoor Skirted Terminations
3M™ Cold Shrink QT-III Outdoor 8 Skirt Termination 7684-S-8, 0.83-1.53 in (38,9-58,9 mm) Cable Insulation O.D., 3 per kitThis QT-III has a BIL rating of 200 kV suitable for use on 5, 8.7, 15, 25/28, and 35 kV cables. 3 terminations per kit.
3M™ Cold Shrink QT-III Outdoor 8 Skirt Termination 7685-S-8, 1.05-1.80 in (26,7-45,7 mm) Cable Insulation O.D.This QT-III has a BIL rating of 200 kV suitable for use on 5, 8.7, 15, 25/28, and 35 kV cables. 3 terminations per kit.
3M™ Cold Shrink QT-III Outdoor 8 Skirt Termination 7686-S-8, 1.84-2.80 in (46,8-71,1 mm) Cable Insulation O.D.This QT-III has a BIL rating of 95 kV and is suitable for use on 5 and 8.7 kV cables. 3 terminations per kit.
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Cold Shrink QT-III Outdoor terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Cold Shrink QT-III Outdoor terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design
3M™ Cold Shrink QT-III Outdoor terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design delivers excellent BIL performance and lower surface stress resulting in a more compact termination. Through superior engineering, 3M™ Cold Shrink QT-III Outdoor terminations deliver maximum performance.
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Cold Shrink QT-III Outdoor terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Cold Shrink QT-III Outdoor terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design
3M™ Cold Shrink QT-III Outdoor terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design delivers excellent BIL performance and lower surface stress resulting in a more compact termination. Through superior engineering, 3M™ Cold Shrink QT-III Outdoor terminations deliver maximum performance.
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Cold Shrink QT-III Outdoor terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Cold Shrink QT-III Outdoor terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design
3M™ Cold Shrink QT-III Outdoor terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design delivers excellent BIL performance and lower surface stress resulting in a more compact termination. Through superior engineering, 3M™ Cold Shrink QT-III Outdoor terminations deliver maximum performance.
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Cold Shrink QT-III Outdoor terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Cold Shrink QT-III Outdoor terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design
3M™ Cold Shrink QT-III Outdoor terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design delivers excellent BIL performance and lower surface stress resulting in a more compact termination. Through superior engineering, 3M™ Cold Shrink QT-III Outdoor terminations deliver maximum performance.
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Cold Shrink QT-III Outdoor terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Cold Shrink QT-III Outdoor terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design
3M™ Cold Shrink QT-III Outdoor terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design delivers excellent BIL performance and lower surface stress resulting in a more compact termination. Through superior engineering, 3M™ Cold Shrink QT-III Outdoor terminations deliver maximum performance.
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Cold Shrink QT-III Outdoor terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Cold Shrink QT-III Outdoor terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design
3M™ Cold Shrink QT-III Outdoor terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design delivers excellent BIL performance and lower surface stress resulting in a more compact termination. Through superior engineering, 3M™ Cold Shrink QT-III Outdoor terminations deliver maximum performance.
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Cold Shrink QT-III Outdoor terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Cold Shrink QT-III Outdoor terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design
3M™ Cold Shrink QT-III Outdoor terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design delivers excellent BIL performance and lower surface stress resulting in a more compact termination. Through superior engineering, 3M™ Cold Shrink QT-III Outdoor terminations deliver maximum performance.
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Cold Shrink QT-III Outdoor terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Cold Shrink QT-III Outdoor terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design
3M™ Cold Shrink QT-III Outdoor 8 Skirt Termination 7683-S-8, 0.72-1.29 in (18,3-32,8 mm) Cable Insulation O.D., 3 per kit
Printer-friendly
format
Additional Information
3M™ Cold Shrink QT-III Outdoor terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design delivers excellent BIL performance and lower surface stress resulting in a more compact termination. Through superior engineering, 3M™ Cold Shrink QT-III Outdoor terminations deliver maximum performance.
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Cold Shrink QT-III Outdoor terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Cold Shrink QT-III Outdoor terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design
3M™ Cold Shrink QT-III Outdoor 8 Skirt Termination 7684-S-8, 0.83-1.53 in (38,9-58,9 mm) Cable Insulation O.D., 3 per kit
Printer-friendly
format
Additional Information
3M™ Cold Shrink QT-III Outdoor terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design delivers excellent BIL performance and lower surface stress resulting in a more compact termination. Through superior engineering, 3M™ Cold Shrink QT-III Outdoor terminations deliver maximum performance.
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Cold Shrink QT-III Outdoor terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Cold Shrink QT-III Outdoor terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design
3M™ Cold Shrink QT-III Outdoor terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design delivers excellent BIL performance and lower surface stress resulting in a more compact termination. Through superior engineering, 3M™ Cold Shrink QT-III Outdoor terminations deliver maximum performance.
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Cold Shrink QT-III Outdoor terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Cold Shrink QT-III Outdoor terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design
3M™ Cold Shrink QT-III Outdoor terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. It has UV stability and track and erosion resistance. Plus its Hi-K stress control design delivers excellent BIL performance and lower surface stress resulting in a more compact termination. Through superior engineering, 3M™ Cold Shrink QT-III Outdoor terminations deliver maximum performance.
3M Global Mining : 3M™ Infrared Thermometer IR-60EXPL2-1, 110 V, Software, 1 per case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Electrical Solutions Infrared Thermometers
3M™ Infrared Thermometer IR-60EXPL2-1, 110 V, Software, 1 per case
[click to enlarge]
The IR-60EXP2-1 features 17 point circle laser sighting, a 50:1 distance-to-spot ratio, adjustable emissivity, a temperature range of -25°F (-32°C) to 1600°F (870°C), a Hi-Lo alarm for scanning. It has a 110 volt power supply.
3M Id : 80-6109-2822-0GTIN(UPC/EAN) : 0 00 54007 42852 7
Additional Information
Learn More . . .
Packaging Data
3M Infrared Thermometers - Brochure (PDF 672.4 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Additionally, it stores up to 100 data points allowing for easy set-up of preventative maintenance programs. For the ultimate in data logging, the IR-60EXP2-1, adds the versatility of direct computer connection for data downloads or printing. This unit can mount to a tripod, where temperature data can be measured over an extended period of time and output directly to a chart recorder, printer, or
Full Text . . .
Characteristics
Alarm Setting High and LowAverage Temperature Setting YesClass II Laser Sighting YesData Output NoData Storage YesDifferential Temperature Setting YesEmissivity Adjustable 0.10 to 1.00EU RoHS Compliant NoField of View 60:1Height 7.9 Inch LCD Backlight YesLength 6.7 Inch Locking Trigger YesMaximum Battery Life 25 Hour Maximum Battery Life with both Laser and Backlight On. 6 Hour
http://products3.3m.com/catalog/ww/en001/mining/-/nod..._globalmining_3_0/command_AbcPageHandler/output_print (1 of 2)22/11/2006 12:12:15 PM
Select a Location
English
Email
3M Global Mining : 3M™ Infrared Thermometer IR-60EXPL2-1, 110 V, Software, 1 per case
Maximum Battery Life with Laser On 11 Hour Maximum Temperature Setting YesMinimum Temperature Setting YesPower Source 2 x 1.5V Alkaline Type AAPrimary Trademark Name 3MResponse Time 250 msec (95% response)Storage Temperature -25 to 122 Degree Fahrenheit Weight 1.375 Pound Width 2 Inch
3M™ Infrared Thermometer IR-60EXPL2-1, 110 V, Software, 1 per case
Printer-friendly
format
Additional Information
Additionally, it stores up to 100 data points allowing for easy set-up of preventative maintenance programs. For the ultimate in data logging, the IR-60EXP2-1, adds the versatility of direct computer connection for data downloads or printing. This unit can mount to a tripod, where temperature data can be measured over an extended period of time and output directly to a chart recorder, printer, or PC. This 3M™ Infrared Thermometer comes standard with an RS232 cable, Windows-based software, power supply, hard plastic case, wrist strap and contact probe.
3M™ Infrared Thermometer IR-60EXPL2-1, 110 V, Software, 1 per case
Additional Information
Additionally, it stores up to 100 data points allowing for easy set-up of preventative maintenance programs. For the ultimate in data logging, the IR-60EXP2-1, adds the versatility of direct computer connection for data downloads or printing. This unit can mount to a tripod, where temperature data can be measured over an extended period of time and output directly to a chart recorder, printer, or PC. This 3M™ Infrared Thermometer comes standard with an RS232 cable, Windows-based software, power supply, hard plastic case, wrist strap and contact probe.
3M Global Mining : 3M™ Infrared Thermometer IR-60L2, 1 per case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Electrical Solutions Infrared Thermometers
3M™ Infrared Thermometer IR-60L2, 1 per case
[click to enlarge]
The IR-60L2 features 17 point circle laser sighting, a 60:1 distance-to-spot ratio, adjustable emissivity, a temperature range of -25°F (-32°C) to 1600°F (870°C) and a Hi alarm for scanning.
3M Id : 80-6109-2810-5GTIN(UPC/EAN) : 0 00 54007 42840 4
Additional Information
Learn More . . .
Packaging Data
3M Infrared Thermometers - Brochure (PDF 672.4 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
This unit can mount to a tripod and come standard with a hard plastic case and wrist strap.
Characteristics
Average Temperature Setting NoClass II Laser Sighting YesData Output NoData Storage NoEmissivity Adjustable 0.10 to 1.00EU RoHS Compliant NoField of View 60:1Height 7.9 Inch LCD Backlight YesLength 6.7 Inch Locking Trigger YesMaximum Battery Life 25 Hour Maximum Battery Life with both Laser and Backlight On. 6 Hour
Maximum Battery Life with Laser On 11 Hour Mounting Option Tripod Mount: 1/4 in - 20UNCPower Source 2 x 1.5V Alkaline Type AA
http://products3.3m.com/catalog/ww/en001/mining/-/nod..._globalmining_3_0/command_AbcPageHandler/output_print (1 of 2)22/11/2006 12:12:44 PM
Select a Location
English
Email
3M Global Mining : 3M™ Infrared Thermometer IR-60L2, 1 per case
Primary Trademark Name 3MResponse Time 250 msec (95% response)Scan Size Indicator Laser YesWeight 1.375 Pound Width 2 Inch
Product Catalog for 3M Mining Electrical Solutions Infrared Thermometers
3M™ IR-750C Heat Tracer Basic Model, Obsolete
[click to enlarge]
3M™ IR-750C Heat Tracer Basic Model
3M Id : 80-6109-8098-1GTIN(UPC/EAN) : 0 00 54007 43111 4
Additional Information
Learn More . . .
PackagingData
The 3M™ IR-750C Infrared Heat Tracer covers the basics of temperature measurement. It is lightweight and constructed of rugged plastic to withstand use in industrial environments. It has a temperature-measurement range of -25°F (-32°C) to 750°F (400°C), which encompasses the normal operation temperature of most industrial motors and equipment. The 3M™ IR-750C heat tracer is user friendly with a
Full Text . . .
Characteristics
Alarm Setting NoneAverage Temperature Setting NoData Output NoData Storage NoDifferential Temperature Setting No
Emissivity Pre-set at 0.95Field of View 8:1Height 7.7 Inch LCD Backlight YesLength 5.4 Inch Locking Trigger YesMaximum Battery Life 33 Hour Maximum Temperature Setting Yes
Power Source 9V Alkaline or NEDA No. 1604 battery
Response Time 500 msec (95% response)Spectral Response 7 to 18 Micrometre (Micron) Storage Temperature -13 to 158 Degree Fahrenheit Temperature Detection Range -25 to 750 Degree Fahrenheit Weight 9.5 Ounce
http://products3.3m.com/catalog/ww/en001/mining/-/nod..._globalmining_3_0/command_AbcPageHandler/output_print (1 of 2)22/11/2006 12:13:09 PM
The 3M™ IR-750C Infrared Heat Tracer covers the basics of temperature measurement. It is lightweight and constructed of rugged plastic to withstand use in industrial environments. It has a temperature-measurement range of -25°F (-32°C) to 750°F (400°C), which encompasses the normal operation temperature of most industrial motors and equipment. The 3M™ IR-750C heat tracer is user friendly with a back-lit LCD display and point-and-shoot operation. It has a dual display that shows the actual and maximum temperature. A minimum amount of training is required, making it a versatile tool.
The 3M™ IR-750C Infrared Heat Tracer covers the basics of temperature measurement. It is lightweight and constructed of rugged plastic to withstand use in industrial environments. It has a temperature-measurement range of -25°F (-32°C) to 750°F (400°C), which encompasses the normal operation temperature of most industrial motors and equipment. The 3M™ IR-750C heat tracer is user friendly with a back-lit LCD display and point-and-shoot operation. It has a dual display that shows the actual and maximum temperature. A minimum amount of training is required, making it a versatile tool.
3M Global Mining : 3M™ IR-750CEXL2 Heat Tracer Class II Laser extended performance, Obsolete
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Electrical Solutions Infrared Thermometers
3M™ IR-750CEXL2 Heat Tracer Class II Laser extended performance, Obsolete3M™ IR-750CEXL2 Heat Tracer Class II Laser extended performance
3M Id : 80-6109-8100-5GTIN(UPC/EAN) : 0 00 54007 43113 8
Additional Information
Learn More . . .
PackagingData
The 3M™ IR-750CEXL2 Infrared Heat Tracer covers an increased temperature range of -25°F (-32°C) to 932°F (500°C), and displays the maximum, minimum, differential or average temperature while the trigger is pulled; a selectable high or low alarm, which is adjustable throughout the temperature range of the heat tracers; and adjustable emissivity. The 3M™ IR-750CEXL2 features built-in Class II laser
Full Text . . .
Characteristics
Alarm Setting High and LowAverage Temperature Setting YesClass II Laser Sighting YesData Output NoData Storage NoDifferential Temperature Setting YesEmissivity Adjustable 0.3 to 1.00Field of View 8:1Height 7.7 Inch LCD Backlight YesLength 5.4 Inch Locking Trigger YesMaximum Battery Life 33 Hour Maximum Battery Life with both Laser and Backlight On. 11 Hour
Maximum Battery Life with Laser On 11 Hour Maximum Temperature Setting YesMinimum Temperature Setting Yes
Power Source 9V Alkaline or NEDA No. 1604 battery
Primary Trademark Name 3MResponse Time 500 msec (95% response)Spectral Response 7 to 18 Micrometre (Micron) Storage Temperature -13 to 158 Degree Fahrenheit
http://products3.3m.com/catalog/ww/en001/mining/-/nod..._globalmining_3_0/command_AbcPageHandler/output_print (1 of 2)22/11/2006 12:14:00 PM
Select a Location
English
3M Global Mining : 3M™ IR-750CEXL2 Heat Tracer Class II Laser extended performance, Obsolete
Tracer Class II Laser extended performance, Obsolete
3M™ IR-750CEXL2 Heat Tracer Class II Laser extended performance, Obsolete
Printer-friendly
format
Additional Information
The 3M™ IR-750CEXL2 Infrared Heat Tracer covers an increased temperature range of -25°F (-32°C) to 932°F (500°C), and displays the maximum, minimum, differential or average temperature while the trigger is pulled; a selectable high or low alarm, which is adjustable throughout the temperature range of the heat tracers; and adjustable emissivity. The 3M™ IR-750CEXL2 features built-in Class II laser sighting.
Tracer Class II Laser extended performance, Obsolete
3M™ IR-750CEXL2 Heat Tracer Class II Laser extended performance, Obsolete
Additional Information
The 3M™ IR-750CEXL2 Infrared Heat Tracer covers an increased temperature range of -25°F (-32°C) to 932°F (500°C), and displays the maximum, minimum, differential or average temperature while the trigger is pulled; a selectable high or low alarm, which is adjustable throughout the temperature range of the heat tracers; and adjustable emissivity. The 3M™ IR-750CEXL2 features built-in Class II laser sighting.
3M Global Mining : Heat Shrink Wraparound Cable Repair Sleeve
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Electrical Solutions Jacketing Products
Heat Shrink Wraparound Cable Repair Sleeve
[click to enlarge]
HDCW Heat Shrink Wraparound cable repair sleeves are designed to quickly repair damaged cable jacketing. They are also used to rejacket in-line splices. Each kit contains 1 adhesive heat-shrink wrap, and 1 stainless steel closure. Both items can be cut to the required length.
Make a Selection
3M™ Heat Shrink Cable Repair Wrap Sleeve HDCW-35/10-1000This 39.4" (1000 mm) sleeve are designed to repair damaged cable jacketing with the Max/Min use range of 1.38"- 0.39" (35-10 mm), with sleeve dimensions for expanded diameter of 1.97" (50 mm) and recovered diameter of 0.32" (8 mm). 600/1000V Conductor Size of #8 AWG-2/0 MCM.
3M™ Heat Shrink Cable Repair Wrap Sleeve HDCW-80/25-1200This 47.2" (1200 mm) sleeve is designed to repair damaged cable jacketing with the Max/Min use range of 3.15"- 0.98" (80-25 mm), with sleeve dimensions for expanded diameter of 3.94" (100 mm) and recovered diameter of 0.91" (23 mm). 600/1000V Conductor Size of 500 AWG-1000 MCM.
3M™ Heat Shrink Cable Repair Wrap Sleeve HDCW-110/30-1200This 47.2" (1200 mm) sleeve is designed to repair damaged cable jacketing with the Max/Min use range of 4.33"- 1.18" (110-30 mm), with sleeve dimensions for expanded diameter of 5.20" (132 mm) and recovered diameter of 0.98" (25 mm). 600/1000V Conductor Size of 1000 AWG-2000 MCM.
3M™ Heat Shrink Cable Repair Wrap Sleeve HDCW-140/40-1200This 47.2" (1200 mm) sleeve is designed to repair damaged cable jacketing with the Max/Min use range of 5.39"- 1.38" (137-35 mm), with sleeve dimensions for expanded diameter of 5.71" (145 mm) and recovered diameter of 1.26" (32 mm).
Printer-friendly format 3M™ Heat Shrink Cable Repair Wrap Sleeve HDCW-35/10-1000
[click to enlarge]
This 39.4" (1000 mm) sleeve are designed to repair damaged cable jacketing with the Max/Min use range of 1.38"- 0.39" (35-10 mm), with sleeve dimensions for expanded diameter of 1.97" (50 mm) and recovered diameter of 0.32" (8 mm). 600/1000V Conductor Size of #8 AWG-2/0 MCM.
3M Id : DE-9999-6534-1GTIN(UPC/EAN) : 0 00 51138 48419 4
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
This 39.4" (1000 mm) sleeve are designed to repair damaged cable jacketing with the Max/Min use range of 1.38"- 0.39" (35-10 mm), with sleeve dimensions for expanded diameter of 1.97" (50 mm) and recovered diameter of 0.32" (8 mm). 600/1000V Conductor Size of #8 AWG-2/0 MCM.
3M Id : DE-9999-6534-1GTIN(UPC/EAN) : 0 00 51138 48419 4
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Printer-friendly format 3M™ Heat Shrink Cable Repair Wrap Sleeve HDCW-80/25-1200
[click to enlarge]
This 47.2" (1200 mm) sleeve is designed to repair damaged cable jacketing with the Max/Min use range of 3.15"- 0.98" (80-25 mm), with sleeve dimensions for expanded diameter of 3.94" (100 mm) and recovered diameter of 0.91" (23 mm). 600/1000V Conductor Size of 500 AWG-1000 MCM.
3M Id : DE-9999-6565-5GTIN(UPC/EAN) : 0 00 51138 48438 5
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
This 47.2" (1200 mm) sleeve is designed to repair damaged cable jacketing with the Max/Min use range of 3.15"- 0.98" (80-25 mm), with sleeve dimensions for expanded diameter of 3.94" (100 mm) and recovered diameter of 0.91" (23 mm). 600/1000V Conductor Size of 500 AWG-1000 MCM.
3M Id : DE-9999-6565-5GTIN(UPC/EAN) : 0 00 51138 48438 5
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Printer-friendly format 3M™ Heat Shrink Cable Repair Wrap Sleeve HDCW-110/30-1200
[click to enlarge]
This 47.2" (1200 mm) sleeve is designed to repair damaged cable jacketing with the Max/Min use range of 4.33"- 1.18" (110-30 mm), with sleeve dimensions for expanded diameter of 5.20" (132 mm) and recovered diameter of 0.98" (25 mm). 600/1000V Conductor Size of 1000 AWG-2000 MCM.
3M Id : DE-9999-6570-5GTIN(UPC/EAN) : 0 00 51138 48439 2
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
This 47.2" (1200 mm) sleeve is designed to repair damaged cable jacketing with the Max/Min use range of 4.33"- 1.18" (110-30 mm), with sleeve dimensions for expanded diameter of 5.20" (132 mm) and recovered diameter of 0.98" (25 mm). 600/1000V Conductor Size of 1000 AWG-2000 MCM.
3M Id : DE-9999-6570-5GTIN(UPC/EAN) : 0 00 51138 48439 2
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Printer-friendly format 3M™ Heat Shrink Cable Repair Wrap Sleeve HDCW-140/40-1200
[click to enlarge]
This 47.2" (1200 mm) sleeve is designed to repair damaged cable jacketing with the Max/Min use range of 5.39"- 1.38" (137-35 mm), with sleeve dimensions for expanded diameter of 5.71" (145 mm) and recovered diameter of 1.26" (32 mm).
3M Id : DE-9999-6575-4GTIN(UPC/EAN) : 0 00 51138 48440 8
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
This 47.2" (1200 mm) sleeve is designed to repair damaged cable jacketing with the Max/Min use range of 5.39"- 1.38" (137-35 mm), with sleeve dimensions for expanded diameter of 5.71" (145 mm) and recovered diameter of 1.26" (32 mm).
3M Id : DE-9999-6575-4GTIN(UPC/EAN) : 0 00 51138 48440 8
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Product Catalog for 3M Mining Electrical Solutions Jacketing Products
Scotchcast™ Resin Compound
[click to enlarge]
2130 is a flexible, permanent, flame retardant, urethane resin used for jacket repair or splicing portable cables.
Make a Selection
3M™ Scotchcast™ Flame Retardant Compound 2130B, 7.6 ozThis is a semi-flexible, permanent, urethane resin used for jacket repair or splicing portable cables.
Product Info for Scotchcast 2130 Flame Retardant Compound - Product Selection Guide (PDF 7.0 K)
Scotchcast Electrical Resin 2130 - Data Sheet (PDF 34.2 K)
Specifications and Ordering Info for Scotchcast 2130 Flame Retar - Product Selection Guide (PDF 4.9 K)
Specifications and Ordering Info Scotchcast 2130 Flame Retardant - Product Selection Guide (PDF 4.9 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
It is flame retardant and has MSHA approval number P-142-5 when used with 82-F1 or 82-F2 Splice kits.
Characteristics
Color BlackEU RoHS Compliant NoFlame Retardant YesGel Time 15 Minutes at 73°F (23°C)Hardness 80 Shore AMaterial PolyurethanePrimary Trademark Name Scotchcast
http://products3.3m.com/catalog/ww/en001/mining/-/nod..._globalmining_3_0/command_AbcPageHandler/output_print (1 of 2)22/11/2006 12:16:54 PM
Select a Location
English
Email
Email
Email
Email
Email
Email
3M Global Mining : 3M™ Scotchcast™ Flame Retardant Compound 2130B, 7.6 oz
3M Global Mining : Thick Wall Heat Shrink Cable Sleeves
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Electrical Solutions Jacketing Products
Thick Wall Heat Shrink Cable Sleeves
[click to enlarge]
Heat shrinkable cable sleeves provide reliable performance for electrical splices, connections and terminations, as well as mechanical and environmental protection. ITCSN heavy-wall cable sleeves are cross-linked polyolefin. They are highly split resistanct and fast shrinking to provide rapid installation. The cut-to-length sleeves come standard with a factory-applied adhesive/sealant.
Make a Selection
3M™ Heat Shrink Heavy-Wall Cable Sleeves for 1kV ITCSN-0800-48-Box, 8-1/0 AWG, Expanded/Recovered I.D. 0.80/0.20 in, 48 in Length, boxed3M™ Heat Shrinkable Cable Sleeves ITCSN provide reliable performance for electrical splices, connections and terminations, as well as mechanical and environmental protection. This cable sleeve comes in a length of 48 inch.
3M™ Heat Shrink Heavy-Wall Cable Sleeves for 1kV ITCSN-1500-48-Box, 3/0 AWG-400 kcmil, Expanded/Recovered I.D. 1.50/0.50 in, 48 in Length, boxed3M™ Heat Shrinkable Cable Sleeves ITCSN provide reliable performance for electrical splices, connections and terminations, as well as mechanical and environmental protection. This cable sleeve comes in a length of 48 inch.
Printer-friendly format 3M™ Heat Shrink Heavy-Wall Cable Sleeves for 1kV ITCSN-0800-48-Box, 8-1/0 AWG, Expanded/Recovered I.D. 0.80/0.20 in, 48 in Length, boxed
[click to enlarge]
3M™ Heat Shrinkable Cable Sleeves ITCSN provide reliable performance for electrical splices, connections and terminations, as well as mechanical and environmental protection. This cable sleeve comes in a length of 48 inch.
3M Id : 80-6102-2962-9GTIN(UPC/EAN) : 0 00 54007 08903 2
Additional Information
Learn More . . .
Packaging Data
ITCSN Heavy Wall Tubing - Data Sheet (PDF 25.9 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Heat Shrinkable Heavy-wall Cable Sleeves ITCSN are cross-linked polyolefin. They are highly split resistant and fast shrinking to provide rapid installation. The cut-to-length sleeves come standard with a factory-applied adhesive/sealant. Order any of several packaging choices or look for the counter merchandiser assortment at a 3M authorized distributor. Rated to 1 kV, UL Listed 486 D for
3M™ Heat Shrink Heavy-Wall Cable Sleeves for 1kV ITCSN-0800-48-Box, 8-1/0 AWG, Expanded/Recovered I.D. 0.80/0.20 in, 48 in Length, boxed
[click to enlarge]
3M™ Heat Shrinkable Cable Sleeves ITCSN provide reliable performance for electrical splices, connections and terminations, as well as mechanical and environmental protection. This cable sleeve comes in a length of 48 inch.
3M Id : 80-6102-2962-9GTIN(UPC/EAN) : 0 00 54007 08903 2
Additional Information
Learn More . . .
Packaging Data
ITCSN Heavy Wall Tubing - Data Sheet (PDF 25.9 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Heat Shrinkable Heavy-wall Cable Sleeves ITCSN are cross-linked polyolefin. They are highly split resistant and fast shrinking to provide rapid installation. The cut-to-length sleeves come standard with a factory-applied adhesive/sealant. Order any of several packaging choices or look for the counter merchandiser assortment at a 3M authorized distributor. Rated to 1 kV, UL Listed 486 D for
3M™ Heat Shrink Heavy-Wall Cable Sleeves for 1kV ITCSN-0800-48-Box, 8-1/0 AWG, Expanded/Recovered I.D. 0.80/0.20 in, 48 in Length, boxed
Printer-friendly
format
Additional Information
3M™ Heat Shrinkable Heavy-wall Cable Sleeves ITCSN are cross-linked polyolefin. They are highly split resistant and fast shrinking to provide rapid installation. The cut-to-length sleeves come standard with a factory-applied adhesive/sealant. Order any of several packaging choices or look for the counter merchandiser assortment at a 3M authorized distributor. Rated to 1 kV, UL Listed 486 D for 600V. File Number E102356. CSA Rating. When ordering, please specify boxed, bulk, tamper evident bag or merchandising display to assure proper pricing.
Printer-friendly format 3M™ Heat Shrink Heavy-Wall Cable Sleeves for 1kV ITCSN-1500-48-Box, 3/0 AWG-400 kcmil, Expanded/Recovered I.D. 1.50/0.50 in, 48 in Length, boxed
[click to enlarge]
3M™ Heat Shrinkable Cable Sleeves ITCSN provide reliable performance for electrical splices, connections and terminations, as well as mechanical and environmental protection. This cable sleeve comes in a length of 48 inch.
3M Id : 80-6102-2964-5GTIN(UPC/EAN) : 0 00 54007 08905 6
Additional Information
Learn More . . .
Packaging Data
ITCSN Heavy Wall Tubing - Data Sheet (PDF 25.9 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Heat Shrinkable Heavy-wall Cable Sleeves ITCSN are cross-linked polyolefin. They are highly split resistant and fast shrinking to provide rapid installation. The cut-to-length sleeves come standard with a factory-applied adhesive/sealant. Order any of several packaging choices or look for the counter merchandiser assortment at a 3M authorized distributor. Rated to 1 kV, UL Listed 486 D for
3M™ Heat Shrink Heavy-Wall Cable Sleeves for 1kV ITCSN-1500-48-Box, 3/0 AWG-400 kcmil, Expanded/Recovered I.D. 1.50/0.50 in, 48 in Length, boxed
[click to enlarge]
3M™ Heat Shrinkable Cable Sleeves ITCSN provide reliable performance for electrical splices, connections and terminations, as well as mechanical and environmental protection. This cable sleeve comes in a length of 48 inch.
3M Id : 80-6102-2964-5GTIN(UPC/EAN) : 0 00 54007 08905 6
Additional Information
Learn More . . .
Packaging Data
ITCSN Heavy Wall Tubing - Data Sheet (PDF 25.9 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Heat Shrinkable Heavy-wall Cable Sleeves ITCSN are cross-linked polyolefin. They are highly split resistant and fast shrinking to provide rapid installation. The cut-to-length sleeves come standard with a factory-applied adhesive/sealant. Order any of several packaging choices or look for the counter merchandiser assortment at a 3M authorized distributor. Rated to 1 kV, UL Listed 486 D for
Expanded/Recovered I.D. 1.50/0.50 in, 48 in Length, boxed
3M™ Heat Shrink Heavy-Wall Cable Sleeves for 1kV ITCSN-1500-48-Box, 3/0 AWG-400 kcmil, Expanded/Recovered I.D. 1.50/0.50 in, 48 in Length, boxed
Printer-friendly
format
Additional Information
3M™ Heat Shrinkable Heavy-wall Cable Sleeves ITCSN are cross-linked polyolefin. They are highly split resistant and fast shrinking to provide rapid installation. The cut-to-length sleeves come standard with a factory-applied adhesive/sealant. Order any of several packaging choices or look for the counter merchandiser assortment at a 3M authorized distributor. Rated to 1 kV, UL Listed 486 D for 600V. File Number E102356. CSA Rating. When ordering, please specify boxed, bulk, tamper evident bag or merchandising display to assure proper pricing.
3M Global Mining : Thin Wall Heat Shrink Cables Sleeves
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Electrical Solutions Jacketing Products
Thin Wall Heat Shrink Cables Sleeves
[click to enlarge]
3M™ FP-301 Heat Shrink Tubing offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial applications. The tubing is typically used as a shrink-fit electrical insulation over cable splices and terminations. It is also used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering.
Make a Selection
3M™ Heat Shrink Thin-Wall Tubing FP-301-1/16-Black-4'-Box, 1/16 in x 4 ft sticks, 25 per case3M™ Heat Shrink Tubing FP-301 offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications. This tubing comes in 48 inch sticks and in a case quantity of 25.
3M™ Heat Shrink Thin-Wall Tubing FP-301-3/16-Black-4'-Box, 3/16 in X 4 ft sticks, 25 per case3M™ Heat Shrink Tubing FP-301 offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications. This tubing comes in 48 inch sticks and in a case quantity of 25.
Printer-friendly format 3M™ Heat Shrink Thin-Wall Tubing FP-301-1/16-Black-4'-Box, 1/16 in x 4 ft sticks, 25 per case
[click to enlarge]
3M™ Heat Shrink Tubing FP-301 offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications. This tubing comes in 48 inch sticks and in a case quantity of 25.
3M Id : 80-6107-8551-3GTIN(UPC/EAN) : 0 00 51135 36650 9
Additional Information
Learn More . . .
Packaging Data
FP-301 Tubing - Data Sheet (PDF 9.3 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Thin Wall Tubing FP-301 is a heat shrinkable flexible polyolefin tubing that offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications. Rated for 275°F(135°C) continuous operation. FP-301 tubing is typically used as a shrink-fit electrical insulation over cable splices and terminations. It is also used for
3M™ Heat Shrink Thin-Wall Tubing FP-301-1/16-Black-4'-Box, 1/16 in x 4 ft sticks, 25 per case
[click to enlarge]
3M™ Heat Shrink Tubing FP-301 offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications. This tubing comes in 48 inch sticks and in a case quantity of 25.
3M Id : 80-6107-8551-3GTIN(UPC/EAN) : 0 00 51135 36650 9
Additional Information
Learn More . . .
Packaging Data
FP-301 Tubing - Data Sheet (PDF 9.3 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Thin Wall Tubing FP-301 is a heat shrinkable flexible polyolefin tubing that offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications. Rated for 275°F(135°C) continuous operation. FP-301 tubing is typically used as a shrink-fit electrical insulation over cable splices and terminations. It is also used for
Sleeves 3M™ Heat Shrink Thin-Wall Tubing FP-301-1/16-Black-4'-Box, 1/16 in x 4 ft sticks, 25 per case
3M™ Heat Shrink Thin-Wall Tubing FP-301-1/16-Black-4'-Box, 1/16 in x 4 ft sticks, 25 per case
Printer-friendly
format
Additional Information
3M™ Thin Wall Tubing FP-301 is a heat shrinkable flexible polyolefin tubing that offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications. Rated for 275°F(135°C) continuous operation. FP-301 tubing is typically used as a shrink-fit electrical insulation over cable splices and terminations. It is also used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering. FP-301 clear tubing provides excellent visibility for component packing. All FP-301 tubing is split resistant, mechanically tough, easily marked and resists cold flow. FP-301 is available in black, white, red, blue, yellow and clear in the standard lengths of 6-inch (15,2 cm) cut pieces, 48-inch (1,21 m) and small (8.5-inch core diameter) spools of 50 (15,24 m) and 100 (30,48 m) feet. Four-foot lengths of green tubing are available in sizes 1/16 inch to 1/2 inch. The Assorted Color Kit has a total of 133 pieces and contains seven colors: black, red, white, yellow, blue, green and clear. The Black Kit contains 102 pieces, all 6" (512,4 mm) lengths (see chart below.)Additional sizes, colors and put-ups are available -please contact your 3M Electrical Products Sales Representative. Application Specifications: UL Recognized and CSA Certified at 600 volts at 257°F(125°C); UL File No. E-39100 and CSA No. 38227. MIL-I-23053/5, Class 1,2. AMS 3636 (Type I) and AMS 3637 (Type II). To Order: Reference specific product size, color and description on the following pages. Example: FP-301-1/4, white 6" (15,2 cm) pieces.
Printer-friendly format 3M™ Heat Shrink Thin-Wall Tubing FP-301-3/16-Black-4'-Box, 3/16 in X 4 ft sticks, 25 per case
[click to enlarge]
3M™ Heat Shrink Tubing FP-301 offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications. This tubing comes in 48 inch sticks and in a case quantity of 25.
3M Id : 80-6107-8588-5GTIN(UPC/EAN) : 0 00 51135 36687 5
Additional Information
Learn More . . .
Packaging Data
FP-301 Tubing - Data Sheet (PDF 9.3 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Thin Wall Tubing FP-301 is a heat shrinkable flexible polyolefin tubing that offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications. Rated for 275°F(135°C) continuous operation. FP-301 tubing is typically used as a shrink-fit electrical insulation over cable splices and terminations. It is also used for
3M™ Heat Shrink Thin-Wall Tubing FP-301-3/16-Black-4'-Box, 3/16 in X 4 ft sticks, 25 per case
[click to enlarge]
3M™ Heat Shrink Tubing FP-301 offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications. This tubing comes in 48 inch sticks and in a case quantity of 25.
3M Id : 80-6107-8588-5GTIN(UPC/EAN) : 0 00 51135 36687 5
Additional Information
Learn More . . .
Packaging Data
FP-301 Tubing - Data Sheet (PDF 9.3 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Thin Wall Tubing FP-301 is a heat shrinkable flexible polyolefin tubing that offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications. Rated for 275°F(135°C) continuous operation. FP-301 tubing is typically used as a shrink-fit electrical insulation over cable splices and terminations. It is also used for
Sleeves 3M™ Heat Shrink Thin-Wall Tubing FP-301-3/16-Black-4'-Box, 3/16 in X 4 ft sticks, 25 per case
3M™ Heat Shrink Thin-Wall Tubing FP-301-3/16-Black-4'-Box, 3/16 in X 4 ft sticks, 25 per case
Printer-friendly
format
Additional Information
3M™ Thin Wall Tubing FP-301 is a heat shrinkable flexible polyolefin tubing that offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications. Rated for 275°F(135°C) continuous operation. FP-301 tubing is typically used as a shrink-fit electrical insulation over cable splices and terminations. It is also used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering. FP-301 clear tubing provides excellent visibility for component packing. All FP-301 tubing is split resistant, mechanically tough, easily marked and resists cold flow. FP-301 is available in black, white, red, blue, yellow and clear in the standard lengths of 6-inch (15,2 cm) cut pieces, 48-inch (1,21 m) and small (8.5-inch core diameter) spools of 50 (15,24 m) and 100 (30,48 m) feet. Four-foot lengths of green tubing are available in sizes 1/16 inch to 1/2 inch. The Assorted Color Kit has a total of 133 pieces and contains seven colors: black, red, white, yellow, blue, green and clear. The Black Kit contains 102 pieces, all 6" (512,4 mm) lengths (see chart below.)Additional sizes, colors and put-ups are available -please contact your 3M Electrical Products Sales Representative. Application Specifications: UL Recognized and CSA Certified at 600 volts at 257°F(125°C); UL File No. E-39100 and CSA No. 38227. MIL-I-23053/5, Class 1,2. AMS 3636 (Type I) and AMS 3637 (Type II). To Order: Reference specific product size, color and description on the following pages. Example: FP-301-1/4, white 6" (15,2 cm) pieces.
3M Global Mining : Wire Pulling Lubricant Communication
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Electrical Solutions Lubricant Products
Wire Pulling Lubricant Communication
[click to enlarge]
3M™ Wire Pulling Lubricant Communications is a slow drying, water-based liquid lubricant formulated for lightguide cable pulling.
Make a Selection
3M™ Wire Pulling Lubricant Communication WLC-5, Five Gallons3M™ Wire Pulling Lubricant Communications is a slow drying, water-based liquid lubricant formulated for lightguide cable pulling. Case is 1 container weighing 42 lbs total.
3M™ Wire Pulling Lubricant Communication WLC-QT, One Quart3M™ Wire Pulling Lubricant Communications is a slow drying, water-based liquid lubricant formulated for lightguide cable pulling. Case is 12 containers weighing 28 lbs total.
Printer-friendly format 3M™ Wire Pulling Lubricant Communication WLC-5, Five Gallons
[click to enlarge]
3M™ Wire Pulling Lubricant Communications is a slow drying, water-based liquid lubricant formulated for lightguide cable pulling. Case is 1 container weighing 42 lbs total.
3M Id : 80-6108-3434-5GTIN(UPC/EAN) : 0 00 54007 41785 9
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Specifications and Ordering Info for 3M™ Wire Pulling Lubrica - Product Selection Guide (PDF 4.9 K)
Wire Pulling Lubricant Communications Features Advantages Benefi - Features and Benefits (PDF 8.6 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
The lubricant produces a low coefficient of friction that lessens the chance of lightguide cable damage from high pulling forces. Wire Pulling Lubricant Communications provides maximum tension reduction for long fiber optic pulls, multiple bend pulls and pulls in hot environments. It will not stress crack low-density polyethylene and is compatible with a broad range of cable jackets.
Characteristics
Container Type 5-Gallon PailContainer Volume 5 Gallon (US) EU RoHS Compliant YesPrimary Trademark Name Scotch
3M™ Wire Pulling Lubricant Communication WLC-5, Five Gallons
[click to enlarge]
3M™ Wire Pulling Lubricant Communications is a slow drying, water-based liquid lubricant formulated for lightguide cable pulling. Case is 1 container weighing 42 lbs total.
3M Id : 80-6108-3434-5GTIN(UPC/EAN) : 0 00 54007 41785 9
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Specifications and Ordering Info for 3M™ Wire Pulling Lubrica - Product Selection Guide (PDF 4.9 K)
Wire Pulling Lubricant Communications Features Advantages Benefi - Features and Benefits (PDF 8.6 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
The lubricant produces a low coefficient of friction that lessens the chance of lightguide cable damage from high pulling forces. Wire Pulling Lubricant Communications provides maximum tension reduction for long fiber optic pulls, multiple bend pulls and pulls in hot environments. It will not stress crack low-density polyethylene and is compatible with a broad range of cable jackets.
Characteristics
Container Type 5-Gallon PailContainer Volume 5 Gallon (US) EU RoHS Compliant YesPrimary Trademark Name Scotch
Printer-friendly format 3M™ Wire Pulling Lubricant Communication WLC-QT, One Quart
[click to enlarge]
3M™ Wire Pulling Lubricant Communications is a slow drying, water-based liquid lubricant formulated for lightguide cable pulling. Case is 12 containers weighing 28 lbs total.
3M Id : 80-6108-3432-9GTIN(UPC/EAN) : 0 00 54007 41783 5
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Specifications and Ordering Info for 3M™ Wire Pulling Lubrica - Product Selection Guide (PDF 4.9 K)
Wire Pulling Lubricant Communications Features Advantages Benefi - Features and Benefits (PDF 8.6 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
The lubricant produces a low coefficient of friction that lessens the chance of lightguide cable damage from high pulling forces. Wire Pulling Lubricant Communications provides maximum tension reduction for long fiber optic pulls, multiple bend pulls and pulls in hot environments. It will not stress crack low-density polyethylene and is compatible with a broad range of cable jackets.
Characteristics
Container Type 1-Quart BottleContainer Volume .25 Gallon (US) EU RoHS Compliant YesPrimary Trademark Name Scotch
3M™ Wire Pulling Lubricant Communication WLC-QT, One Quart
[click to enlarge]
3M™ Wire Pulling Lubricant Communications is a slow drying, water-based liquid lubricant formulated for lightguide cable pulling. Case is 12 containers weighing 28 lbs total.
3M Id : 80-6108-3432-9GTIN(UPC/EAN) : 0 00 54007 41783 5
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Specifications and Ordering Info for 3M™ Wire Pulling Lubrica - Product Selection Guide (PDF 4.9 K)
Wire Pulling Lubricant Communications Features Advantages Benefi - Features and Benefits (PDF 8.6 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
The lubricant produces a low coefficient of friction that lessens the chance of lightguide cable damage from high pulling forces. Wire Pulling Lubricant Communications provides maximum tension reduction for long fiber optic pulls, multiple bend pulls and pulls in hot environments. It will not stress crack low-density polyethylene and is compatible with a broad range of cable jackets.
Characteristics
Container Type 1-Quart BottleContainer Volume .25 Gallon (US) EU RoHS Compliant YesPrimary Trademark Name Scotch
Product Catalog for 3M Mining Electrical Solutions Lubricant Products
Wire Pulling Lubricant Gel
[click to enlarge]
This is a water-soluble, translucent white gel that is easy to handle and apply to wire and cable without runs or drips.
Make a Selection
3M™ Wire Pulling Lubricant Gel WL-1, One GallonThis is a water-soluble, translucent white gel that is easy to handle and apply to wire and cable without runs or drips. The lubricant produces a low coefficient of friction that lessens the chance of wire damage from high pulling forces. 4 per case
3M™ Wire Pulling Lubricant Gel WL-5, Five GallonsThis is a water-soluble, translucent white gel that is easy to handle and apply to wire and cable without runs or drips. The lubricant produces a low coefficient of friction that lessens the chance of wire damage from high pulling forces. Case is 1 container weighing 42 lbs.
3M™ Wire Pulling Lubricant Gel WL-QT, One QuartThis is a water-soluble, translucent white gel that is easy to handle and apply to wire and cable without runs or drips. The lubricant produces a low coefficient of friction that lessens the chance of wire damage from high pulling forces. Case is 12 containers weighing 28 lbs total.
Product Catalog for 3M Mining Electrical Solutions Lubricant Products Wire Pulling Lubricant Gel
Printer-friendly format 3M™ Wire Pulling Lubricant Gel WL-1, One Gallon
[click to enlarge]
This is a water-soluble, translucent white gel that is easy to handle and apply to wire and cable without runs or drips. The lubricant produces a low coefficient of friction that lessens the chance of wire damage from high pulling forces. 4 per case
3M Id : 80-6107-3663-1GTIN(UPC/EAN) : 0 00 54007 50623 2
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
WL Wire Pulling Lubricant - Data Sheet (PDF 74.4 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Not only does 3M™ Wire Pulling Lubricant Gel make wire pulling jobs smoother and safer, it also wipes off the cable quickly and cleanly before terminating or splicing. The consistent gel does not liquefy, or separate with hot or cold aging. It stays thick, smooth and ready to apply. Temperatue use range is 20°F to 110°F.
Characteristics
Container Type 1-Gallon PailContainer Volume 1 Gallon (US) EU RoHS Compliant YesPrimary Trademark Name 3M
3M Global Mining : 3M™ Wire Pulling Lubricant Gel WL-1, One Gallon
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Electrical Solutions Lubricant Products Wire Pulling Lubricant Gel
3M™ Wire Pulling Lubricant Gel WL-1, One Gallon
[click to enlarge]
This is a water-soluble, translucent white gel that is easy to handle and apply to wire and cable without runs or drips. The lubricant produces a low coefficient of friction that lessens the chance of wire damage from high pulling forces. 4 per case
3M Id : 80-6107-3663-1GTIN(UPC/EAN) : 0 00 54007 50623 2
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
WL Wire Pulling Lubricant - Data Sheet (PDF 74.4 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Not only does 3M™ Wire Pulling Lubricant Gel make wire pulling jobs smoother and safer, it also wipes off the cable quickly and cleanly before terminating or splicing. The consistent gel does not liquefy, or separate with hot or cold aging. It stays thick, smooth and ready to apply. Temperatue use range is 20°F to 110°F.
Characteristics
Container Type 1-Gallon PailContainer Volume 1 Gallon (US) EU RoHS Compliant YesPrimary Trademark Name 3M
Product Catalog for 3M Mining Electrical Solutions Lubricant Products Wire Pulling Lubricant Gel
Printer-friendly format 3M™ Wire Pulling Lubricant Gel WL-5, Five Gallons
[click to enlarge]
This is a water-soluble, translucent white gel that is easy to handle and apply to wire and cable without runs or drips. The lubricant produces a low coefficient of friction that lessens the chance of wire damage from high pulling forces. Case is 1 container weighing 42 lbs.
3M Id : 80-6107-3664-9GTIN(UPC/EAN) : 0 00 54007 50624 9
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
WL Wire Pulling Lubricant - Data Sheet (PDF 74.4 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Not only does 3M™ Wire Pulling Lubricant Gel make wire pulling jobs smoother and safer, it also wipes off the cable quickly and cleanly before terminating or splicing. The consistent gel does not liquefy, or separate with hot or cold aging. It stays thick, smooth and ready to apply. Temperatue use range is 20°F to 110°F.
Characteristics
Container Type 5-Gallon PailContainer Volume 5 Gallon (US) EU RoHS Compliant YesPrimary Trademark Name 3M
3M Global Mining : 3M™ Wire Pulling Lubricant Gel WL-5, Five Gallons
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Electrical Solutions Lubricant Products Wire Pulling Lubricant Gel
3M™ Wire Pulling Lubricant Gel WL-5, Five Gallons
[click to enlarge]
This is a water-soluble, translucent white gel that is easy to handle and apply to wire and cable without runs or drips. The lubricant produces a low coefficient of friction that lessens the chance of wire damage from high pulling forces. Case is 1 container weighing 42 lbs.
3M Id : 80-6107-3664-9GTIN(UPC/EAN) : 0 00 54007 50624 9
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
WL Wire Pulling Lubricant - Data Sheet (PDF 74.4 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Not only does 3M™ Wire Pulling Lubricant Gel make wire pulling jobs smoother and safer, it also wipes off the cable quickly and cleanly before terminating or splicing. The consistent gel does not liquefy, or separate with hot or cold aging. It stays thick, smooth and ready to apply. Temperatue use range is 20°F to 110°F.
Characteristics
Container Type 5-Gallon PailContainer Volume 5 Gallon (US) EU RoHS Compliant YesPrimary Trademark Name 3M
Product Catalog for 3M Mining Electrical Solutions Lubricant Products Wire Pulling Lubricant Gel
Printer-friendly format 3M™ Wire Pulling Lubricant Gel WL-QT, One Quart
[click to enlarge]
This is a water-soluble, translucent white gel that is easy to handle and apply to wire and cable without runs or drips. The lubricant produces a low coefficient of friction that lessens the chance of wire damage from high pulling forces. Case is 12 containers weighing 28 lbs total.
3M Id : 80-6107-3662-3GTIN(UPC/EAN) : 0 00 54007 50622 5
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
WL Wire Pulling Lubricant - Data Sheet (PDF 74.4 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Not only does 3M™ Wire Pulling Lubricant Gel make wire pulling jobs smoother and safer, it also wipes off the cable quickly and cleanly before terminating or splicing. The consistent gel does not liquefy, or separate with hot or cold aging. It stays thick, smooth and ready to apply. Temperatue use range is 20°F to 110°F.
Characteristics
Container Type 1-Quart BottleContainer Volume .25 Gallon (US) EU RoHS Compliant YesPrimary Trademark Name 3M
3M Global Mining : 3M™ Wire Pulling Lubricant Gel WL-QT, One Quart
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Electrical Solutions Lubricant Products Wire Pulling Lubricant Gel
3M™ Wire Pulling Lubricant Gel WL-QT, One Quart
[click to enlarge]
This is a water-soluble, translucent white gel that is easy to handle and apply to wire and cable without runs or drips. The lubricant produces a low coefficient of friction that lessens the chance of wire damage from high pulling forces. Case is 12 containers weighing 28 lbs total.
3M Id : 80-6107-3662-3GTIN(UPC/EAN) : 0 00 54007 50622 5
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
WL Wire Pulling Lubricant - Data Sheet (PDF 74.4 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Not only does 3M™ Wire Pulling Lubricant Gel make wire pulling jobs smoother and safer, it also wipes off the cable quickly and cleanly before terminating or splicing. The consistent gel does not liquefy, or separate with hot or cold aging. It stays thick, smooth and ready to apply. Temperatue use range is 20°F to 110°F.
Characteristics
Container Type 1-Quart BottleContainer Volume .25 Gallon (US) EU RoHS Compliant YesPrimary Trademark Name 3M
Product Catalog for 3M Mining Electrical Solutions Lubricant Products
Wire Pulling Lubricant Wax
[click to enlarge]
3M™ Wire Pulling Lubricant Wax can be used and stored in temperatures as high as 194°F (90°C), making it the choice for hot weather applications.
Make a Selection
3M™ Wire Pulling Lubricant Wax 'WLX-5, Five Gallons3M™ Wire Pulling Lubricant Wax can be used and stored in temperatures as high as 194°F (90°C), making it the choice for hot weather applications. Case is 1 container weighing 42 lbs total.
3M™ Wire Pulling Lubricant Wax WLX-1, One Gallon3M™ Wire Pulling Lubricant Wax can be used and stored in temperatures as high as 194°F (90°C), making it the choice for hot weather applications. Case is 4 containers weighing 35 lbs total.
3M™ Wire Pulling Lubricant Wax WLX-QT, One Quart3M™ Wire Pulling Lubricant Wax can be used and stored in temperatures as high as 194°F (90°C), making it the choice for hot weather applications. Case is 12 containers weighing 28 lbs total.
Printer-friendly format 3M™ Wire Pulling Lubricant Wax 'WLX-5, Five Gallons
[click to enlarge]
3M™ Wire Pulling Lubricant Wax can be used and stored in temperatures as high as 194°F (90°C), making it the choice for hot weather applications. Case is 1 container weighing 42 lbs total.
3M Id : 80-6108-3366-9GTIN(UPC/EAN) : 0 00 54007 41744 6
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
The thick, consistent lubricant does not liquefy or separate with hot aging; it scoops and applies easily to wire and cable without runs or drips in hot temperatures; and it will not evaporate too soon after pulls. The lubricant`s low friction coefficient lessens the chance of wire damage from high pulling forces, wipes off the cable quickly and cleanly and leaves less residue in the conduit to
Full Text . . .
Characteristics
Container Type 5-Gallon PailContainer Volume 5 Gallon (US) EU RoHS Compliant YesPrimary Trademark Name Scotch
3M™ Wire Pulling Lubricant Wax 'WLX-5, Five Gallons
[click to enlarge]
3M™ Wire Pulling Lubricant Wax can be used and stored in temperatures as high as 194°F (90°C), making it the choice for hot weather applications. Case is 1 container weighing 42 lbs total.
3M Id : 80-6108-3366-9GTIN(UPC/EAN) : 0 00 54007 41744 6
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
The thick, consistent lubricant does not liquefy or separate with hot aging; it scoops and applies easily to wire and cable without runs or drips in hot temperatures; and it will not evaporate too soon after pulls. The lubricant`s low friction coefficient lessens the chance of wire damage from high pulling forces, wipes off the cable quickly and cleanly and leaves less residue in the conduit to
Full Text . . .
Characteristics
Container Type 5-Gallon PailContainer Volume 5 Gallon (US) EU RoHS Compliant YesPrimary Trademark Name Scotch
3M™ Wire Pulling Lubricant Wax 'WLX-5, Five Gallons
3M™ Wire Pulling Lubricant Wax 'WLX-5, Five Gallons
Printer-friendly
format
Additional Information
The thick, consistent lubricant does not liquefy or separate with hot aging; it scoops and applies easily to wire and cable without runs or drips in hot temperatures; and it will not evaporate too soon after pulls. The lubricant`s low friction coefficient lessens the chance of wire damage from high pulling forces, wipes off the cable quickly and cleanly and leaves less residue in the conduit to block future pulls or prevent removal. Because Wire Pulling Lubricant Wax can be immersed in water for 30 minutes with minimal weight loss, it is also the choice for wet weather applications.
Printer-friendly format 3M™ Wire Pulling Lubricant Wax WLX-1, One Gallon
[click to enlarge]
3M™ Wire Pulling Lubricant Wax can be used and stored in temperatures as high as 194°F (90°C), making it the choice for hot weather applications. Case is 4 containers weighing 35 lbs total.
3M Id : 80-6108-3365-1GTIN(UPC/EAN) : 0 00 54007 41743 9
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
The thick, consistent lubricant does not liquefy or separate with hot aging; it scoops and applies easily to wire and cable without runs or drips in hot temperatures; and it will not evaporate too soon after pulls. The lubricant's low friction coefficient lessens the chance of wire damage from high pulling forces, wipes off the cable quickly and cleanly and leaves less residue in the conduit to
Full Text . . .
Characteristics
Container Type 1-Gallon PailContainer Volume 1 Gallon (US) EU RoHS Compliant YesPrimary Trademark Name Scotch
3M™ Wire Pulling Lubricant Wax can be used and stored in temperatures as high as 194°F (90°C), making it the choice for hot weather applications. Case is 4 containers weighing 35 lbs total.
3M Id : 80-6108-3365-1GTIN(UPC/EAN) : 0 00 54007 41743 9
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
The thick, consistent lubricant does not liquefy or separate with hot aging; it scoops and applies easily to wire and cable without runs or drips in hot temperatures; and it will not evaporate too soon after pulls. The lubricant's low friction coefficient lessens the chance of wire damage from high pulling forces, wipes off the cable quickly and cleanly and leaves less residue in the conduit to
Full Text . . .
Characteristics
Container Type 1-Gallon PailContainer Volume 1 Gallon (US) EU RoHS Compliant YesPrimary Trademark Name Scotch
3M™ Wire Pulling Lubricant Wax WLX-1, One Gallon Printer-friendly
format
Additional Information
The thick, consistent lubricant does not liquefy or separate with hot aging; it scoops and applies easily to wire and cable without runs or drips in hot temperatures; and it will not evaporate too soon after pulls. The lubricant's low friction coefficient lessens the chance of wire damage from high pulling forces, wipes off the cable quickly and cleanly and leaves less residue in the conduit to block future pulls or prevent removal. Because Wire Pulling Lubricant Wax can be immersed in water for 30 minutes with minimal weight loss, it is also the choice for wet weather applications.
Printer-friendly format 3M™ Wire Pulling Lubricant Wax WLX-QT, One Quart
[click to enlarge]
3M™ Wire Pulling Lubricant Wax can be used and stored in temperatures as high as 194°F (90°C), making it the choice for hot weather applications. Case is 12 containers weighing 28 lbs total.
3M Id : 80-6108-3364-4GTIN(UPC/EAN) : 0 00 54007 41742 2
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
The thick, consistent lubricant does not liquefy or separate with hot aging; it scoops and applies easily to wire and cable without runs or drips in hot temperatures; and it will not evaporate too soon after pulls. The lubricant`s low friction coefficient lessens the chance of wire damage from high pulling forces, wipes off the cable quickly and cleanly and leaves less residue in the conduit to
Full Text . . .
Characteristics
Container Type 1-Quart BottleContainer Volume .25 Gallon (US) EU RoHS Compliant YesPrimary Trademark Name Scotch
3M™ Wire Pulling Lubricant Wax can be used and stored in temperatures as high as 194°F (90°C), making it the choice for hot weather applications. Case is 12 containers weighing 28 lbs total.
3M Id : 80-6108-3364-4GTIN(UPC/EAN) : 0 00 54007 41742 2
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
The thick, consistent lubricant does not liquefy or separate with hot aging; it scoops and applies easily to wire and cable without runs or drips in hot temperatures; and it will not evaporate too soon after pulls. The lubricant`s low friction coefficient lessens the chance of wire damage from high pulling forces, wipes off the cable quickly and cleanly and leaves less residue in the conduit to
Full Text . . .
Characteristics
Container Type 1-Quart BottleContainer Volume .25 Gallon (US) EU RoHS Compliant YesPrimary Trademark Name Scotch
3M™ Wire Pulling Lubricant Wax WLX-QT, One Quart Printer-friendly
format
Additional Information
The thick, consistent lubricant does not liquefy or separate with hot aging; it scoops and applies easily to wire and cable without runs or drips in hot temperatures; and it will not evaporate too soon after pulls. The lubricant`s low friction coefficient lessens the chance of wire damage from high pulling forces, wipes off the cable quickly and cleanly and leaves less residue in the conduit to block future pulls or prevent removal. Because Wire Pulling Lubricant Wax can be immersed in water for 30 minutes with minimal weight loss, it is also the choice for wet weather applications.
3M Global Mining : Wire Pulling Lubricant Wintergrade
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Electrical Solutions Lubricant Products
Wire Pulling Lubricant Wintergrade
[click to enlarge]
3M™ Wire Pulling Lubricant Wintergrade can be used and stored in temperatures as low as 10°F (-12°C), making it the choice for cold weather applications.
Make a Selection
3M™ Wire Pulling Lubricant Wintergrade WLW-1, One Gallon3M™ Wire Pulling Lubricant Wintergrade can be used and stored in temperatures as low as 10°F (-12°C), making it the choice for cold weather applications. Case is 4 containers weighing 7.4 lbs total.
3M™ Wire Pulling Lubricant Wintergrade WLW-5, 5 Gallons3M™ Wire Pulling Lubricant Wintergrade can be used and stored in temperatures as low as 10°F (-12°C), making it the choice for cold weather applications. Case is 1 container weighing 42 lbs.
3M™ Wire Pulling Lubricant Wintergrade WLW-QT, One Quart3M™ Wire Pulling Lubricant Wintergrade can be used and stored in temperatures as low as 10°F (-12°C), making it the choice for cold weather applications. Case is 12 containers weighing 28 lbs total.
Printer-friendly format 3M™ Wire Pulling Lubricant Wintergrade WLW-1, One Gallon
[click to enlarge]
3M™ Wire Pulling Lubricant Wintergrade can be used and stored in temperatures as low as 10°F (-12°C), making it the choice for cold weather applications. Case is 4 containers weighing 7.4 lbs total.
3M Id : 80-6108-3369-3GTIN(UPC/EAN) : 0 00 54007 41747 7
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Specifications and Ordering Info for 3M™ Wire Pulling Lubrica - Product Selection Guide (PDF 4.9 K)
Wire Pulling Lubricant Wintergrade Features Advantages Benefits - Features and Benefits (PDF 10.2 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
The thick lubricant remains easy to scoop and apply to wire and cable without runs, or drips in both warm, and cold temperatures. The lubricant produces a low coefficient of friction that lessens the chance of wire damage from high pulling forces. It wipes off the cable quickly and cleanly before terminating, or splicing common wire and cable jackets.
Characteristics
Container Type 1-Gallon PailContainer Volume 1 Gallon (US) EU RoHS Compliant YesPrimary Trademark Name Scotch
3M™ Wire Pulling Lubricant Wintergrade WLW-1, One Gallon
[click to enlarge]
3M™ Wire Pulling Lubricant Wintergrade can be used and stored in temperatures as low as 10°F (-12°C), making it the choice for cold weather applications. Case is 4 containers weighing 7.4 lbs total.
3M Id : 80-6108-3369-3GTIN(UPC/EAN) : 0 00 54007 41747 7
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Specifications and Ordering Info for 3M™ Wire Pulling Lubrica - Product Selection Guide (PDF 4.9 K)
Wire Pulling Lubricant Wintergrade Features Advantages Benefits - Features and Benefits (PDF 10.2 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
The thick lubricant remains easy to scoop and apply to wire and cable without runs, or drips in both warm, and cold temperatures. The lubricant produces a low coefficient of friction that lessens the chance of wire damage from high pulling forces. It wipes off the cable quickly and cleanly before terminating, or splicing common wire and cable jackets.
Characteristics
Container Type 1-Gallon PailContainer Volume 1 Gallon (US) EU RoHS Compliant YesPrimary Trademark Name Scotch
Printer-friendly format 3M™ Wire Pulling Lubricant Wintergrade WLW-5, 5 Gallons
[click to enlarge]
3M™ Wire Pulling Lubricant Wintergrade can be used and stored in temperatures as low as 10°F (-12°C), making it the choice for cold weather applications. Case is 1 container weighing 42 lbs.
3M Id : 80-6108-3370-1GTIN(UPC/EAN) : 0 00 54007 41748 4
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Specifications and Ordering Info for 3M™ Wire Pulling Lubrica - Product Selection Guide (PDF 4.9 K)
Wire Pulling Lubricant Wintergrade Features Advantages Benefits - Features and Benefits (PDF 10.2 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
The thick lubricant remains easy to scoop and apply to wire and cable without runs, or drips in both warm, and cold temperatures. The lubricant produces a low coefficient of friction that lessens the chance of wire damage from high pulling forces. It wipes off the cable quickly and cleanly before terminating, or splicing common wire and cable jackets.
Characteristics
Container Type 5-Gallon PailContainer Volume 5 Gallon (US) EU RoHS Compliant YesPrimary Trademark Name Scotch
3M™ Wire Pulling Lubricant Wintergrade can be used and stored in temperatures as low as 10°F (-12°C), making it the choice for cold weather applications. Case is 1 container weighing 42 lbs.
3M Id : 80-6108-3370-1GTIN(UPC/EAN) : 0 00 54007 41748 4
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Specifications and Ordering Info for 3M™ Wire Pulling Lubrica - Product Selection Guide (PDF 4.9 K)
Wire Pulling Lubricant Wintergrade Features Advantages Benefits - Features and Benefits (PDF 10.2 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
The thick lubricant remains easy to scoop and apply to wire and cable without runs, or drips in both warm, and cold temperatures. The lubricant produces a low coefficient of friction that lessens the chance of wire damage from high pulling forces. It wipes off the cable quickly and cleanly before terminating, or splicing common wire and cable jackets.
Characteristics
Container Type 5-Gallon PailContainer Volume 5 Gallon (US) EU RoHS Compliant YesPrimary Trademark Name Scotch
Printer-friendly format 3M™ Wire Pulling Lubricant Wintergrade WLW-QT, One Quart
[click to enlarge]
3M™ Wire Pulling Lubricant Wintergrade can be used and stored in temperatures as low as 10°F (-12°C), making it the choice for cold weather applications. Case is 12 containers weighing 28 lbs total.
3M Id : 80-6108-3368-5GTIN(UPC/EAN) : 0 00 54007 41746 0
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Specifications and Ordering Info for 3M™ Wire Pulling Lubrica - Product Selection Guide (PDF 4.9 K)
Wire Pulling Lubricant Wintergrade Features Advantages Benefits - Features and Benefits (PDF 10.2 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
The thick lubricant remains easy to scoop and apply to wire and cable without runs, or drips in both warm, and cold temperatures. The lubricant produces a low coefficient of friction that lessens the chance of wire damage from high pulling forces. It wipes off the cable quickly and cleanly before terminating, or splicing common wire and cable jackets.
Characteristics
Container Type 1-Quart BottleContainer Volume .25 Gallon (US) EU RoHS Compliant YesPrimary Trademark Name Scotch
3M™ Wire Pulling Lubricant Wintergrade WLW-QT, One Quart
[click to enlarge]
3M™ Wire Pulling Lubricant Wintergrade can be used and stored in temperatures as low as 10°F (-12°C), making it the choice for cold weather applications. Case is 12 containers weighing 28 lbs total.
3M Id : 80-6108-3368-5GTIN(UPC/EAN) : 0 00 54007 41746 0
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Specifications and Ordering Info for 3M™ Wire Pulling Lubrica - Product Selection Guide (PDF 4.9 K)
Wire Pulling Lubricant Wintergrade Features Advantages Benefits - Features and Benefits (PDF 10.2 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
The thick lubricant remains easy to scoop and apply to wire and cable without runs, or drips in both warm, and cold temperatures. The lubricant produces a low coefficient of friction that lessens the chance of wire damage from high pulling forces. It wipes off the cable quickly and cleanly before terminating, or splicing common wire and cable jackets.
Characteristics
Container Type 1-Quart BottleContainer Volume .25 Gallon (US) EU RoHS Compliant YesPrimary Trademark Name Scotch
3M Global Mining : 3M™ Cloth Belt 761D, 3 in x 24 in P120 Y weight Filmlok, 5 per inner 25 per case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products 3M™ Cloth Belt 761D, 3 in x
24 in P120 Y weight Filmlok, 5 per inner 25 per case
3M™ Cloth Belt 761D, 3 in x 24 in P120 Y weight Filmlok, 5 per inner 25 per case
Additional Information
For tough portable belt sanding jobs; features long-lasting, durable 3M™ Cubitron™ abrasive grain on a strong Y-weight backing. The closed coat feature provides a better finish and less aggressive cut than a comparable open coat abrasives of the same grade. The purple* color indicates it's leading edge technology designed to provide the lowest possible manufacturing costs. *The purple color is a trademark of 3M.
3M™ Abrasive Flap Disc 747D, 4 1/2 in x 7/8 in 36 X weight, 10 per case
[click to enlarge]
A Cubitron™ abrasive grain abrasive flap disc constructed on a X weight, durable cloth backing. Resin bonded for heat resistance. Features grinding aid for cooler grinding. Grade: 36. Primary market: metalworking.
3M Id : 60-6500-3466-7GTIN(UPC/EAN) : 0 00 51111 49613 8
Additional Information
Learn More . . .
Packaging Data
3M™ Flap Disc Type 27 Illustration Line Art - Illustration/Line Art- (TIFF)
Characteristics
Abrasive Backing Type ClothAbrasive Backing Weight Y Weight
Abrasive Mineral Type Ceramic Aluminum OxidePrimary Trademark Name Cubitron
3M™ Abrasive Flap Disc 747D, 4 1/2 in x 7/8 in 50 X weight, 10 per case
[click to enlarge]
A Cubitron™ abrasive grain abrasive flap disc constructed on a X weight, durable cloth backing. Resin bonded for heat resistance. Features grinding aid for cooler grinding. Grade: 50. Primary market: metalworking.
3M Id : 60-6500-3467-5GTIN(UPC/EAN) : 0 00 51111 49614 5
Additional Information
Learn More . . .
Packaging Data
3M™ Flap Disc Type 27 Illustration Line Art - Illustration/Line Art- (TIFF)
Characteristics
Abrasive Backing Type ClothAbrasive Backing Weight X Weight
Abrasive Mineral Type Ceramic Aluminum OxidePrimary Trademark Name Cubitron
3M™ Abrasive Flap Disc 747D, 4 1/2 in x 7/8 in 60 X weight, 10 per case
[click to enlarge]
A Cubitron™ abrasive grain abrasive flap disc constructed on a X weight, durable cloth backing. Resin bonded for heat resistance. Features grinding aid for cooler grinding. Grade: 60. Primary market: metalworking.
3M Id : 60-6500-3468-3GTIN(UPC/EAN) : 0 00 51111 49615 2
Additional Information
Learn More . . .
Packaging Data
3M™ Flap Disc Type 27 Illustration Line Art - Illustration/Line Art- (TIFF)
Characteristics
Abrasive Backing Type ClothAbrasive Backing Weight X Weight
Abrasive Mineral Type Ceramic Aluminum OxidePrimary Trademark Name Cubitron
3M™ Abrasive Flap Disc 747D, 7 in x 7/8 in 36 X weight, 5 per case
[click to enlarge]
The new standard for offhand grinding and finishing of metals. Angled for better surface coverage. Provides a consistent rate of cut for a superior finish and it provides long-life performance that improves quality and lowers cost. MOS: 8600
3M Id : 60-6500-3346-1GTIN(UPC/EAN) : 0 00 51111 49608 4
Additional Information
Learn More . . .
Packaging Data
3M™ Flap Disc Type 27 Illustration Line Art - Illustration/Line Art- (TIFF)
Characteristics
Abrasive Backing Type ClothAbrasive Backing Weight Y Weight
Abrasive Mineral Type Ceramic Aluminum OxidePrimary Trademark Name Cubitron
3M™ Abrasive Flap Disc 747D, 7 in x 7/8 in 50 X weight, 5 per case
[click to enlarge]
The new standard for off hand grinding and finishing of metals. Angled for better surface coverage. Provides a consistent rate of cut for a superior finish and it provides long-life performance that improves quality and lowers cost.
3M Id : 60-6500-3347-9GTIN(UPC/EAN) : 0 00 51111 49609 1
Additional Information
Learn More . . .
Packaging Data
3M™ Flap Disc Type 27 Illustration Line Art - Illustration/Line Art- (TIFF)
Characteristics
Abrasive Backing Type ClothAbrasive Backing Weight X Weight
Abrasive Mineral Type Ceramic Aluminum OxidePrimary Trademark Name Cubitron
3M™ Abrasive Flap Disc 747D, 7 in x 7/8 in 80 X weight, 5 per case
[click to enlarge]
The new standard for off hand grinding and finishing of metals. Angled for better surface coverage. Provides a consistent rate of cut for a superior finish and it provides long-life performance that improves quality and lowers cost.
3M Id : 60-6500-3349-5GTIN(UPC/EAN) : 0 00 51111 49611 4
Additional Information
Learn More . . .
Packaging Data
3M™ Flap Disc Type 27 Illustration Line Art - Illustration/Line Art- (TIFF)
Characteristics
Abrasive Backing Type ClothAbrasive Backing Weight X Weight
Abrasive Mineral Type Ceramic Aluminum OxidePrimary Trademark Name Cubitron
3M™ Abrasive Flap Disc 747D, 7 in x 7/8 in P120 X weight, 5 per case
[click to enlarge]
The new standard for off hand grinding and finishing of metals. Angled for better surface coverage. Provides a consistent rate of cut for a superior finish and it provides long-life performance that improves quality and lowers cost.
3M Id : 60-6500-3350-3GTIN(UPC/EAN) : 0 00 51111 49612 1
Additional Information
Learn More . . .
Packaging Data
3M™ Flap Disc Type 27 Illustration Line Art - Illustration/Line Art- (TIFF)
Characteristics
Abrasive Backing Type ClothAbrasive Backing Weight X Weight
Abrasive Mineral Type Ceramic Aluminum OxidePrimary Trademark Name Cubitron
3M™ Fibre Disc 381C, 7 in x 7/8 in 60, 25 per inner, 100 per case, ObsoleteAn aluminum oxide disc constructed on a fibre backing. Grade: 60. Primary market: metalworking.
3M Id : 60-6700-0063-1GTIN(UPC/EAN) : 0 00 51144 01741 6
Additional Information
Learn More . . .
PackagingData
Characteristics
Abrasive Backing Type FibreAbrasive Mineral Type Aluminum OxideANSI Grade 60Color RedPrimary Trademark Name 3M
3M™ Fibre Type C Type XY Disc 381C, 7 in x 7/8 in Die# 700BB 24, 100 per case Boxed, ObsoleteAn aluminum oxide disc constructed on a fibre backing. Grade: 24. Primary market: metalworking.
3M Id : 60-6800-0595-0GTIN(UPC/EAN) : 0 00 51144 81370 4
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Characteristics
Abrasive Backing Type FibreAbrasive Mineral Type Aluminum OxideANSI Grade 24Color RedPrimary Trademark Name 3M
3M™ Fibre Type C Type XY Disc 381C, 7 in x 7/8 in Die# 700BB 36, 100 per case Boxed, ObsoleteAn aluminum oxide disc constructed on a fibre backing. Grade: 36. Primary market: metalworking.
3M Id : 60-6800-0598-4GTIN(UPC/EAN) : 0 00 51144 81373 5
Additional Information
Learn More . . .
PackagingData
Characteristics
Abrasive Backing Type FibreAbrasive Mineral Type Aluminum OxideANSI Grade 36Color RedPrimary Trademark Name 3M
3M™ Fibre Type C Type XY Disc 381C, 7 in x 7/8 in Die# 700BB 80, 25 per inner 100 per case Boxed, ObsoleteAn aluminum oxide disc constructed on a fibre backing. Grade: 80. Primary market: metalworking.
3M Id : 60-6700-0068-0GTIN(UPC/EAN) : 0 00 51144 01740 9
Additional Information
Learn More . . .
PackagingData
Characteristics
Abrasive Backing Type FibreAbrasive Mineral Type Aluminum OxideANSI Grade 80Color RedPrimary Trademark Name 3M
3M Global Mining : 3M™ Green Corps™ Cut-Off Wheel, 01989, 3 in x 1/32 in x 3/8 in, 5 wheels per pack 10 packs per case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products Green Corps™ Wheels
3M™ Green Corps™ Cut-Off Wheel, 01989, 3 in x 1/32 in x 3/8 in, 5 wheels per pack 10 packs per case
[click to enlarge]
3Ms highest performing, longest lasting wheel used for cutting sheet metal, frame rails, clamps and rusted bolts. Constructed with premium grade abrasives, these wheels out-cut and out-last General Purpose wheels.
3M Id : 60-9800-2880-1GTIN(UPC/EAN) : 0 00 51131 01989 8
Additional Information
Learn More . . .
PackagingData
Characteristics
Center Hole Diameter 3/8 Inch Color GreenDiameter 3 Inch Primary Trademark Name Green Corps
3M Global Mining : 3M™ Green Corps™ Cut-Off Wheel, 01990, 3 in x 1/16 in x 3/8 in, 5 wheels per pack 10 packs per case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products Green Corps™ Wheels
3M™ Green Corps™ Cut-Off Wheel, 01990, 3 in x 1/16 in x 3/8 in, 5 wheels per pack 10 packs per case
[click to enlarge]
3Ms highest performing, longest lasting wheel used for cutting sheet metal, frame rails, clamps and rusted bolts. Constructed with premium grade abrasives, these wheels out-cut and out-last General Purpose wheels.
3M Id : 60-9800-2881-9GTIN(UPC/EAN) : 0 00 51131 01990 4
Additional Information
Learn More . . .
PackagingData
Characteristics
Center Hole Diameter 3/8 Inch Color GreenDiameter 3 Inch Primary Trademark Name Green Corps
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products Green Corps™ Wheels 3M™Green Corps™ Reinforced Weld Grinding Wheel, 01991, 3 in x 3/16 in x 3/8 in, 5 wheels per pack 10 packs
per case
3M™ Green Corps™ Reinforced Weld Grinding Wheel, 01991, 3 in x 3/16 in x 3/8 in, 5 wheels per pack 10 packs per case
Scotch-Brite™ Radial Bristle Disc, 3 in x 3/8 in 50, 40 per case
[click to enlarge]
Durable radial plastic disc for deburring or coating removal. Leaves a coarse satin finish. Gang multiple discs to form a brush. Fits portable hand tool or small bench motor. Abrasive mineral: 50 grade Cubitron™ grain. Color: Green MOS: 25000 RPM
3M Id : 61-5001-3939-1GTIN(UPC/EAN) : 0 00 48011 24279 8
Scotch-Brite™ Radial Bristle Disc, 3 in x 3/8 in 80, 40 per case
[click to enlarge]
Durable radial plastic disc for deburring or coating removal. Leaves a satin finish. Gang multiple discs to form a brush. Fits portable hand tool or small bench motor. Abrasive mineral: 80 grade Cubitron™ grain. Color: Yellow MOS: 25000 RPM
3M Id : 61-5001-3940-9GTIN(UPC/EAN) : 0 00 48011 24280 4
Scotch-Brite™ Radial Bristle Disc, 3 in x 3/8 in 120, 10 per inner 40 per case
[click to enlarge]
Durable radial plastic disc for thin coating removal. Leaves a fine satin finish. Gang multiple discs to form a brush. Fits portable hand tool or small bench motor. Abrasive mineral: 120 grade Cubitron™ grain. Color: White MOS: 25000 RPM
3M Id : 61-5001-3941-7GTIN(UPC/EAN) : 0 00 48011 24281 1
Additional Information
Learn More . . .
PackagingData
Characteristics
ANSI Grade 120Diameter 3 Inch Primary Trademark Name Scotch-Brite
Scotch-Brite™ EXL Deburring Wheel, 6 in x 1 in x 1 in 8A MED, 3 per case
[click to enlarge]
High performance and durability for deburring and finishing applications. Convolutely wound on a core. Hard, long lasting 8 density. Abrasive mineral: Medium grade aluminum oxide. Color: Gray MOS: 6000 RPM
3M Id : 61-5001-2658-8GTIN(UPC/EAN) : 0 00 48011 13617 2
Scotch-Brite™ EXL Deburring Wheel, 6 in x 1 in x 1 in 9S FIN, 3 per case
[click to enlarge]
High performance and durability for deburring and finishing applications. Convolutely wound on a core. Hard, durable 9 density. Abrasive mineral: Fine grade silicon carbide. Color: Gray MOS: 6000 RPM
3M Id : 61-5001-2678-6GTIN(UPC/EAN) : 0 00 48011 05132 1
Scotch-Brite™ Multi-Flex Abrasive Sheet Roll, 8 in x 20 ft A VFN, 60 per roll, 4 rolls per case
[click to enlarge]
Ultra flexible and conformable for cleaning or fine finishing. Convenient dispenser saves time and eliminates waste. Replaces steel wool to eliminate contamination. Abrasive mineral: Very fine grade aluminum oxide. Color: Maroon
3M Id : 61-5001-2924-4GTIN(UPC/EAN) : 0 00 51131 07521 4
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Scotch-Brite™ Multiflex sheets work quickly and economically in sealer sanding, denibbing, defuzzing, highlighting and top coat finishing applications (both solvent- and water-based). Extremely ""scrunchable."" Can be folded, stacked, or rolled to accommodate application needs. For very fine finish applications.
Characteristics
Abrasive Mineral Type Aluminum OxideColor MaroonPrimary Trademark Name Scotch-Brite
Scotch-Brite™ Multi-Flex Abrasive Sheet Roll, 8 in x 20 ft S ULF, 60 per roll 4 rolls per case
[click to enlarge]
Ultra flexible and conformable for cleaning or fine finishing. Convenient dispenser saves time and eliminates waste. Replaces steel wool to eliminate contamination. Abrasive mineral: Ultra fine grade silcon carbide. Color: Gray
3M Id : 61-5001-3442-6GTIN(UPC/EAN) : 0 00 51131 07522 1
Additional Information
Learn More . . .
PackagingData
Scotch-Brite™ Multiflex sheets work quickly and economically in sealer sanding, denibbing, defuzzing, highlighting and top coat finishing applications (both solvent- and water-based). Extremely ""scrunchable."" Can be folded, stacked, or rolled to accommodate application needs. For ultra fine finish applications.
Characteristics
Abrasive Mineral Type Silicon CarbidePrimary Trademark Name Scotch-Brite
3M Global Mining : Scotch-Brite™ Bristle Disc, 4 1/2 in 50, 10 per case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products Scotch-Brite™ and Roloc™
Bristle Discs
Scotch-Brite™ Bristle Disc, 4 1/2 in 50, 10 per case
[click to enlarge]
Brush-like bristle disc removes coarse coatings from the large, open areas of a work-piece. Works on right angle tools quickly and easily with little or no pressure.
3M Id : 61-5001-3901-1GTIN(UPC/EAN) : 0 00 48011 24241 5
Additional Information
Learn More . . .
PackagingData
Characteristics
Boxes per Case 2Color GreenMaximum Operating Speed 12000
Mineral Grade 50Primary Trademark Name Scotch-BriteSize 4-1/2 in.Units per Box 5
3M Global Mining : Scotch-Brite™ Bristle Disc, 4 1/2 in 120, 10 per case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products Scotch-Brite™ and Roloc™
Bristle Discs
Scotch-Brite™ Bristle Disc, 4 1/2 in 120, 10 per case
[click to enlarge]
Brush-like bristle disc removes coarse coatings from the large, open areas of a work-piece. Works on right angle tools quickly and easily with little or no pressure.
3M Id : 61-5001-3903-7GTIN(UPC/EAN) : 0 00 48011 24243 9
3M Global Mining : Scotch-Brite™ Roloc™ Bristle Disc, 2 in x 5/8 Tapered 50, 40 per case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products Scotch-Brite™ and Roloc™
Bristle Discs
Scotch-Brite™ Roloc™ Bristle Disc, 2 in x 5/8 Tapered 50, 40 per case
[click to enlarge]
Disc is a molded, abrasive filled bristle disc instead of wire brushes for automotive use on aluminum and metal. Use for deburring, blending, finishing, polishing, cleaning and for coating, defect, scratch and rust removal.
3M Id : 61-5001-3215-6GTIN(UPC/EAN) : 0 00 48011 18730 3
3M Global Mining : Scotch-Brite™ Roloc™ Bristle Disc, 2 in x 5/8 Tapered 120, 40 per case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products Scotch-Brite™ and Roloc™
Bristle Discs
Scotch-Brite™ Roloc™ Bristle Disc, 2 in x 5/8 Tapered 120, 40 per case
[click to enlarge]
Disc is a molded, abrasive filled bristle disc instead of wire brushes for automotive use on aluminum and metal. Use for deburring, blending, finishing, polishing, cleaning and for coating, defect, scratch and rust removal.
3M Id : 61-5001-3218-0GTIN(UPC/EAN) : 0 00 48011 18733 4
3M Global Mining : Scotch-Brite™ Roloc™ Bristle Disc, 3 in x 5/8 Tapered 50, 40 per case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Abrasive Products Scotch-Brite™ and Roloc™
Bristle Discs
Scotch-Brite™ Roloc™ Bristle Disc, 3 in x 5/8 Tapered 50, 40 per case
[click to enlarge]
Disc is a molded, abrasive filled bristle disc instead of wire brushes for automotive use on aluminum and metal. Use for deburring, blending, finishing, polishing, cleaning and for coating, defect, scratch and rust removal.
3M Id : 61-5001-3219-8GTIN(UPC/EAN) : 0 00 48011 18734 1
Scotch-Brite™ Roloc™ Surface Conditioning Disc TR, 2 in x NH A CRS, 50 per inner 200 per case
[click to enlarge]
A non-woven abrasive product used for cleaning, finishing, blending and deburring applications. A threaded attachment system secures the disc to the holder. Abrasive mineral: Coarse grade aluminum oxide. Color: Brown MOS: 25000 RPM
3M Id : 61-5001-4173-6GTIN(UPC/EAN) : 0 00 48011 05528 2
Scotch-Brite™ Roloc™ Surface Conditioning Disc TR, 2 in x NH A MED, 50 per inner 200 per case
[click to enlarge]
A non-woven abrasive product used for cleaning, finishing, blending and deburring applications. A threaded attachment system secures the disc to the holder. Abrasive mineral: Medium grade aluminum oxide. Color: Maroon MOS: 25000 RPM
3M Id : 61-5001-4172-8GTIN(UPC/EAN) : 0 00 48011 05527 5
Scotch-Brite™ Roloc™ Surface Conditioning Disc TR, 2 in x NH A VFN, 50 per inner 200 per case
[click to enlarge]
A non-woven abrasive product used for cleaning, finishing, blending and deburring applications. A threaded attachment system secures the disc to the holder. Abrasive mineral: Very fine grade aluminum oxide. Color: Blue MOS: 25000 RPM
3M Id : 61-5001-4171-0GTIN(UPC/EAN) : 0 00 48011 05523 7
Scotch-Brite™ Roloc™ Surface Conditioning Disc TR, 3 in x NH A CRS, 25 per inner 100 per case
[click to enlarge]
A non-woven abrasive product used for cleaning, finishing, blending and deburring applications. A threaded attachment system secures the disc to the holder. Abrasive mineral: Coarse grade aluminum oxide. Color: Brown MOS: 18000 RPM
3M Id : 61-5001-4180-1GTIN(UPC/EAN) : 0 00 48011 05532 9
Scotch-Brite™ Roloc™ Surface Conditioning Disc TR, 3 in x NH A MED, 25 per inner 100 per case
[click to enlarge]
A non-woven abrasive product used for cleaning, finishing, blending and deburring applications. A threaded attachment system secures the disc to the holder. Abrasive mineral: Medium grade aluminum oxide. Color: Maroon MOS: 18000 RPM
3M Id : 61-5001-4179-3GTIN(UPC/EAN) : 0 00 48011 05531 2
Scotch-Brite™ Roloc™ Surface Conditioning Disc TR, 3 in x NH A VFN, 25 per inner 100 per case
[click to enlarge]
A non-woven abrasive product used for cleaning, finishing, blending and deburring applications. A threaded attachment system secures the disc to the holder. Abrasive mineral: Very fine grade aluminum oxide. Color: Blue MOS: 18000 RPM
3M Id : 61-5001-4178-5GTIN(UPC/EAN) : 0 00 48011 05530 5
Scotch-Brite™ Surface Conditioning Disc Pack 917S, 7 in, 1 per inner 5 per case
[click to enlarge]
Introductory pack containing a variety of grades of 7 inch non-woven surface conditioning discs. Used for cleaning, finishing, blending and deburring applications. Also includes 917 disc pad holder. MOS: 6000 RPM
3M Id : 61-5001-1760-3GTIN(UPC/EAN) : 0 00 48011 04270 1
Scotch-Brite™ Surface Conditioning Disc, 2 in x NH A CRS, 200 per case
[click to enlarge]
A non-woven abrasive product used for cleaning, finishing, blending and deburring applications. Contains a backing that mounts to hook and loop pads. Abrasive mineral: Coarse grade aluminum oxide. Color: Brown MOS: 23000 RPM
3M Id : 61-5000-1303-4GTIN(UPC/EAN) : 0 00 48011 07458 0
Additional Information
Learn More . . .
PackagingData
Characteristics
Abrasive Mineral Type Aluminum OxideColor BrownPrimary Trademark Name Scotch-Brite
Scotch-Brite™ Surface Conditioning Disc, 2 in x NH A VFN, 200 per case
[click to enlarge]
A non-woven abrasive product used for cleaning, finishing, blending and deburring applications. Contains a backing that mounts to hook and loop pads. Abrasive mineral: Very fine grade aluminum oxide. Color: Blue MOS: 23000 RPM
3M Id : 61-5000-1597-1GTIN(UPC/EAN) : 0 00 48011 04276 3
Additional Information
Learn More . . .
PackagingData
Characteristics
Abrasive Mineral Type Aluminum OxideColor BluePrimary Trademark Name Scotch-Brite
Scotch-Brite™ Surface Conditioning Disc, 7 in x NH A MED, 25 per case
[click to enlarge]
A non-woven abrasive product used for cleaning, finishing, blending and deburring applications. Contains a backing that mounts to hook and loop pads. Abrasive mineral: Medium grade aluminum oxide. Color: Maroon MOS: 6000 RPM
3M Id : 61-5001-2106-8GTIN(UPC/EAN) : 0 00 48011 00645 1
Additional Information
Learn More . . .
PackagingData
Characteristics
Abrasive Mineral Type Aluminum OxideColor MaroonPrimary Trademark Name Scotch-Brite
Scotch-Brite™ Surface Conditioning Disc, 7 in x NH A VFN, 25 per case
[click to enlarge]
A non-woven abrasive product used for cleaning, finishing, blending and deburring applications. Contains a backing that mounts to hook and loop pads. Abrasive mineral: Very fine grade aluminum oxide. Color: Blue MOS: 6000 RPM
3M Id : 61-5001-2116-7GTIN(UPC/EAN) : 0 00 48011 04305 0
Additional Information
Learn More . . .
PackagingData
Characteristics
Abrasive Mineral Type Aluminum OxideColor BluePrimary Trademark Name Scotch-Brite
3M Global Mining : 3M™ Hi-Tack 76 Classic Spray Adhesive Original Formula,...e or use in CA & other states. Consult local air quality rules before use.
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Adhesive Products 3M™ Hi-Tack 76 Classic Spray Adhesive Original Formula, 24 oz, 12 per case, Not for sale or use in CA & other states. Consult local
air quality rules before use.
3M™ Hi-Tack 76 Classic Spray Adhesive Original Formula, 24 oz, 12 per case, Not for sale or use in CA & other states. Consult local air quality rules before use.Packaging
3M Global Mining : Scotch-Brite™ High Performance Cleaning Cloth 2011 Yellow
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Cleaning Products Scotch-Brite™ High
Performance Cloth
Scotch-Brite™ High Performance Cleaning Cloth 2011 Yellow
[click to enlarge]
Specifically designed with a unique combination of bi-component microfibers and knit construction for safe, effective cleaning on the most delicate surfaces. So effective - you can clean without chemicals! 32 cm x 36 cm, 50 per case
3M Id : 70-0708-3377-0GTIN(UPC/EAN) : 5 00 48011 23651 8
Additional Information
Learn More . . .
Packaging Data
Scotch-Brite™ High Performance Cloth, No. 2011 - Data Sheet (PDF 101.2 K)
Scotch-Brite™ High Performance Cloth- Chemical Resistance - Data Sheet (PDF 87.0 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
The microfibers and unique knit construction allows for pick up of dust, oil, water and dirt in one pass. The versatility provides a wide range of uses in the manufacturing process and maintenance of such surfaces as stainless steel, chrome, enamel, painted surfaces, plastics, glass, mirrors, windows, computer monitors, wood and marble.
Characteristics
Color YellowLength 36 Linear Centimetre Material Polyester/NylonPrimary Trademark Name Scotch-Brite
3M Global Mining : Scotch-Brite™ High Performance Cleaning Cloth, 2011, Blue 32 cm x 36 cm 50/cs
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Cleaning Products Scotch-Brite™ High
Performance Cloth
Scotch-Brite™ High Performance Cleaning Cloth, 2011, Blue 32 cm x 36 cm 50/cs
[click to enlarge]
Specifically designed with a unique combination of bi-component microfibers and knit construction for safe, effective cleaning on the most delicate surfaces. So effective - you can clean without chemicals! 32 cm x 36 cm, 50 per case
3M Id : 70-0708-3198-0GTIN(UPC/EAN) : 5 00 48011 23589 4
Additional Information
Learn More . . .
Packaging Data
Scotch-Brite™ High Performance Cloth, No. 2011 - Data Sheet (PDF 101.2 K)
Scotch-Brite™ High Performance Cloth- Chemical Resistance - Data Sheet (PDF 87.0 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
The microfibers and unique knit construction allows for pick up of dust, oil, water and dirt in one pass. The versatility provides a wide range of uses in the manufacturing process and maintenance of such surfaces as stainless steel, chrome, enamel, painted surfaces, plastics, glass, mirrors, windows, computer monitors, wood and marble.
Characteristics
Color BlueLength 36 Linear Centimetre Material Polyester/NylonPrimary Trademark Name Scotch-Brite
3M Global Mining : Scotch-Brite™ High Performance Cleaning Cloth, 2011, Green
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Cleaning Products Scotch-Brite™ High
Performance Cloth
Scotch-Brite™ High Performance Cleaning Cloth, 2011, Green
[click to enlarge]
Specifically designed with a unique combination of bi-component microfibers and knit construction for safe, effective cleaning on the most delicate surfaces. So effective - you can clean without chemicals! 32 cm x 36 cm, 50 per case
3M Id : 70-0708-3376-2GTIN(UPC/EAN) : 5 00 48011 23650 1
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Scotch-Brite™ High Performance Cloth, No. 2011 - Data Sheet (PDF 101.2 K)
Scotch-Brite™ High Performance Cloth- Chemical Resistance - Data Sheet (PDF 87.0 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
The microfibers and unique knit construction allows for pick up of dust, oil, water and dirt in one pass. The versatility provides a wide range of uses in the manufacturing process and maintenance of such surfaces as stainless steel, chrome, enamel, painted surfaces, plastics, glass, mirrors, windows, computer monitors, wood and marble.
Characteristics
Color GreenLength 36 Linear Centimetre Material Polyester/NylonPrimary Trademark Name Scotch-Brite
3M Global Mining : Scotch-Brite™ High Performance Cleaning Cloth, 2011, White, 50/case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Maintenance Solutions Cleaning Products Scotch-Brite™ High
Performance Cloth
Scotch-Brite™ High Performance Cleaning Cloth, 2011, White, 50/case
[click to enlarge]
Specifically designed with a unique combination of bi-component microfibers and knit construction for safe, effective cleaning on the most delicate surfaces. So effective - you can clean without chemicals! 32 cm x 36 cm, 50 per case
3M Id : 70-0708-3375-4GTIN(UPC/EAN) : 5 00 48011 23649 5
Additional Information
Learn More . . .
Packaging Data
High Performance Cloth (Hand) - Product/Application Image- (TIFF)
Scotch-Brite™ High Performance Cloth - Product/Application Image- (TIFF)
Scotch-Brite™ High Performance Cloth, No. 2011 - Data Sheet (PDF 101.2 K)
Scotch-Brite™ High Performance Cloth- Chemical Resistance - Data Sheet (PDF 87.0 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
The microfibers and unique knit construction allows for pick up of dust, oil, water and dirt in one pass. The versatility provides a wide range of uses in the manufacturing process and maintenance of such surfaces as stainless steel, chrome, enamel, painted surfaces, plastics, glass, mirrors, windows, computer monitors, wood and marble.
Characteristics
Color WhiteLength 36 Linear Centimetre Material Polyester/NylonPrimary Trademark Name Scotch-Brite
3M™ PTFE Glass Cloth Tape 5451 Brown, 2 in x 36 yd 5.3 mil, 6 per case Boxed
Additional Information
3M™ PTFE Glass Cloth Tape 5451, premium performance PTFE combined with glass cloth is resistant to most chemicals, provides a slick surface, high tensile strength, puncture resistance and abrasion resistance with low moisture absorption. These products provide long lasting, easy release performance on heat sealing machines and process equipment. You also can use the tapes to keep production moving smoothly through conveying chutes, troughs and ducts.provides a high temperature release surface for protection and insulation such as the bar underneath where the hot wire seals plastic film.
3M™ VHB™ Acrylic Foam Tape 4950 White,18mm x33m, 12 per case45.0 mil, thick white closed cell acrylic foam carrier with all purpose acrylic adhesive and paper liner. High strength, handling convenience, cushioning, damping and impact resistance. UL listing 746C.
3M Id : CT-0607-2998-6
Additional InformationApplication ideas include attaching stiffeners in air conditioners, office furniture and telecommunications equipment. Also, to bond aluminum skin to steel support of truck, vans ambulances. Bond architectural signs to frames.
3M™ VHB™ Acrylic Foam Tape 4950 White,24mm x33m, 9 per case45.0 mil, thick white closed cell acrylic foam carrier with all purpose acrylic adhesive and paper liner. High strength, handling convenience, cushioning, damping and impact resistance. UL listing 746C.
3M Id : CT-0607-2999-4
Additional InformationApplication ideas include attaching stiffeners in air conditioners, office furniture and telecommunications equipment. Also, to bond aluminum skin to steel support of truck, vans ambulances. Bond architectural signs to frames.
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Aluminum Foil Tape 425, dead-soft aluminum foil backing, excellent heat and light reflection to protect against high temperatures and U.V. degradation. The foil also serves as an excellent barrier against moisture, dust, flame, and certain chemicals as used in aircraft paint stripping masking. Acrylic adhesive supplies superior temperature, U.V. and solvent resistance. It provides excellent
Full Text . . .
Characteristics
Adhesive Material AcrylicBacking Material Aluminum FoilLength 60 Linear Yard Primary Trademark Name 3M
Aluminum Foil Tape 425 Silver, 1 in x 60 yd 4.6 mil, 36 per case Bulk
3M™ Aluminum Foil Tape 425 Silver, 1 in x 60 yd 4.6 mil, 36 per case Bulk
Printer-friendly
format
Additional Information
3M™ Aluminum Foil Tape 425, dead-soft aluminum foil backing, excellent heat and light reflection to protect against high temperatures and U.V. degradation. The foil also serves as an excellent barrier against moisture, dust, flame, and certain chemicals as used in aircraft paint stripping masking. Acrylic adhesive supplies superior temperature, U.V. and solvent resistance. It provides excellent age life and is ideal for harsh, long-term outdoor environments. Meets F.A.R 25.853(a), O447
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Aluminum Foil Tape 425, dead-soft aluminum foil backing, excellent heat and light reflection to protect against high temperatures and U.V. degradation. The foil also serves as an excellent barrier against moisture, dust, flame, and certain chemicals as used in aircraft paint stripping masking. Acrylic adhesive supplies superior temperature, U.V. and solvent resistance. It provides excellent
Full Text . . .
Characteristics
Adhesive Material AcrylicBacking Material Aluminum FoilLength 60 Linear Yard Primary Trademark Name 3M
Aluminum Foil Tape 425 Silver, 2 in x 60 yd 4.6 mil, 24 per case Bulk
3M™ Aluminum Foil Tape 425 Silver, 2 in x 60 yd 4.6 mil, 24 per case Bulk
Printer-friendly
format
Additional Information
3M™ Aluminum Foil Tape 425, dead-soft aluminum foil backing, excellent heat and light reflection to protect against high temperatures and U.V. degradation. The foil also serves as an excellent barrier against moisture, dust, flame, and certain chemicals as used in aircraft paint stripping masking. Acrylic adhesive supplies superior temperature, U.V. and solvent resistance. It provides excellent age life and is ideal for harsh, long-term outdoor environments. Meets F.A.R 25.853(a), O447
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Aluminum Foil Tape 425, dead-soft aluminum foil backing, excellent heat and light reflection to protect against high temperatures and U.V. degradation. The foil also serves as an excellent barrier against moisture, dust, flame, and certain chemicals as used in aircraft paint stripping masking. Acrylic adhesive supplies superior temperature, U.V. and solvent resistance. It provides excellent
Full Text . . .
Characteristics
Adhesive Material AcrylicBacking Material Aluminum FoilLength 60 Linear Yard Primary Trademark Name 3M
Aluminum Foil Tape 425 Silver, 3 in x 60 yd 4.6 mil, 12 per case Bulk
3M™ Aluminum Foil Tape 425 Silver, 3 in x 60 yd 4.6 mil, 12 per case Bulk
Printer-friendly
format
Additional Information
3M™ Aluminum Foil Tape 425, dead-soft aluminum foil backing, excellent heat and light reflection to protect against high temperatures and U.V. degradation. The foil also serves as an excellent barrier against moisture, dust, flame, and certain chemicals as used in aircraft paint stripping masking. Acrylic adhesive supplies superior temperature, U.V. and solvent resistance. It provides excellent age life and is ideal for harsh, long-term outdoor environments. Meets F.A.R 25.853(a), O447
3M™ Double Coated Tape 9579 White, 1 1/2 in x 36 yd 9.0 mil, 24 rolls per case Bulk9.0 mil double coated high density polyethylene with rubber adhesive 760 on a 60 lb white densified kraft liner
3M Id : 70-0061-5194-1GTIN(UPC/EAN) : 0 00 21200 65870 9
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
3M™ Double Coated Tape 9579 data page - Data Sheet (PDF 14.3 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
*Aggressive rubber adhesive with high initial adhesion *Used for general purpose joining, mounting and splicing *Quick and easy tacking of carpet edges *Hand tearable
3M™ Double Coated Tape 9579 White, 3/4 in x 36 yd 9.0 mil, 48 rolls per case Bulk9.0 mil double coated high density polyethylene with rubber adhesive 760 on a 60 lb white densified kraft liner
3M Id : 70-0061-5196-6GTIN(UPC/EAN) : 0 00 21200 65872 3
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
3M™ Double Coated Tape 9579 data page - Data Sheet (PDF 14.3 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ High Density Silicone Foam Tape S8300T-125A, designed for use as gaskets, seals cushions and thermal and acoustic insulation in demanding conditions.
3M™ Double Coated Urethane Foam Tape 4026 Off-White, 12mm x 33m, 18 per case1/16 in. Thick off white, Open Cell Urethane Foam Flexible Carrier with High Shear, High Temperature Resistant Acrylic Adhesive. Use to Fill Gaps and Bond Irregular Surfaces. Distributes Stress Uniformly Over Bonded Area. Apply by Hand or with Dispenser.
3M™ Double Coated Urethane Foam Tape 4026 Off-White,18mm x33m, 12 per case1/16 in. Thick off white, Open Cell Urethane Foam Flexible Carrier with High Shear, High Temperature Resistant Acrylic Adhesive. Use to Fill Gaps and Bond Irregular Surfaces. Distributes Stress Uniformly Over Bonded Area. Apply by Hand or with Dispenser.
3M™ Double Coated Urethane Foam Tape 4026 Off-White,24mm x 33m, 9 per caseOpen cell urethane foam flexible carrier with high shear, high temperature resistant acrylic adhesive. Use to fill gaps and bond irregular surfaces. Distributes stress uniformly over bonded area. Apply by hand or with dispenser.
3M™ Glass Cloth Tape 361 White, 1 in x 60 yd 7.5 mil, 36 per case Bulk
[click to enlarge]
White, 7.5 mil (0.14 mm) glass cloth tape with silicone adhesive. Used for many applications requiring high temperature resistance, high adhesion, and a very strong, abrasion resistant backing such as masking protection in thermal spray operations.
3M Id : 70-0023-0613-5GTIN(UPC/EAN) : 0 00 21200 03017 8
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
3M™ Glass Cloth Tape 361 - Data Sheet (PDF 9.8 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
361 tape can be certified to meet F.A.R. 25.853, flame resistant specification.
Characteristics
Adhesive Material SiliconeBacking Material Glass clothColor WhiteLength 60 Linear Yard Primary Trademark Name 3M
3M™ Glass Cloth Tape 361 White, 1/2 in x 60 yd 7.5 mil, 72 per case Bulk
[click to enlarge]
White, 7.5 mil (0.14 mm) glass cloth tape with silicone adhesive. Used for many applications requiring high temperature resistance, high adhesion, and a very strong, abrasion resistant backing such as masking protection in thermal spray operations.
3M Id : 70-0060-3206-7GTIN(UPC/EAN) : 0 00 21200 04993 4
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
3M™ Glass Cloth Tape 361 - Data Sheet (PDF 9.8 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
361 tape can be certified to meet F.A.R. 25.853, flame resistant specification.
Characteristics
Adhesive Material SiliconeBacking Material Glass clothColor WhiteLength 60 Linear Yard Primary Trademark Name 3M
3M™ Glass Cloth Tape 361 White, 2 in x 60 yd 7.5 mil, 24 per case Bulk
[click to enlarge]
White, 7.5 mil (0.14 mm) glass cloth tape with silicone adhesive. Used for many applications requiring high temperature resistance, high adhesion, and a very strong, abrasion resistant backing such as masking protection in thermal spray operations.
3M Id : 70-0060-2019-5GTIN(UPC/EAN) : 0 00 21200 04275 1
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
3M™ Glass Cloth Tape 361 - Data Sheet (PDF 9.8 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
361 tape can be certified to meet F.A.R. 25.853, flame resistant specification.
Characteristics
Adhesive Material SiliconeBacking Material Glass clothColor WhiteLength 60 Linear Yard Primary Trademark Name 3M
3M™ Safety Stripe Tape 5702 Black/Yellow, 2 in x 36 yd 5.4 mil, 24 per case Bulk
[click to enlarge]
3M™ Safety Stripe Tape 5702 Black/Yellow, 5.4 mil (0.14 mm) vinyl backing with rubber adhesive, resists most common solvents
3M Id : 70-0060-2605-1GTIN(UPC/EAN) : 0 00 21200 04585 1
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Safety Stripe Tape 5700_5702 - Data Sheet (PDF 12.7 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Safety Stripe Tape 5702, used to identify and mark traffic areas and physical hazards
CharacteristicsAdhesion to Steel oz/in (N/100 mm) 19 (21)
Adhesive Material Rubber ResinBacking Material VinylColor Black/YellowLength 36 Linear Yard Primary Trademark Name 3MSize 2 in x 36 ydTape Color Black/YellowTensile Strength lb/in (N/100 mm) 15 (260)Thickness 5.4 Milli-inch (Mil) Units per Case 24Width 2 Inch
http://products3.3m.com/catalog/ww/en001/mining/-/nod..._globalmining_3_0/command_AbcPageHandler/output_print (1 of 2)22/11/2006 12:47:18 PM
Select a Location
English
Email
Email
3M Global Mining : 3M™ Safety Stripe Tape 5702 Black/Yellow, 2 in x 36 yd 5.4 mil, 24 per case Bulk
3M Global Mining : 3M™ Glass Bubbles K1, Large box (210 lb, 95.4 kg)
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Mining Specific Glass Bubbles K-Series
3M™ Glass Bubbles K1, Large box (210 lb, 95.4 kg)K1 glass bubbles have a density of 0.125 g/cc and an isostatic crush strength of 250 psi. The general purpose K Series glass bubbles are the most economical 3M glass bubbles.
3M Id : 70-0701-8213-7GTIN(UPC/EAN) : 0 00 21200 67338 2
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M Global Mining : 3M™ Glass Bubbles K1, Small box (40 lb, 18 kg)
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Mining Specific Glass Bubbles K-Series
3M™ Glass Bubbles K1, Small box (40 lb, 18 kg)K1 glass bubbles have a density of 0.125 g/cc and an isostatic crush strength of 250 psi. The general purpose K Series glass bubbles are the most economical 3M glass bubbles.
3M Id : 70-0701-9423-1GTIN(UPC/EAN) : 0 00 21200 67432 7
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M Global Mining : 3M™ Glass Bubbles K20, Small box (60 lb, 27 kg)
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Mining Specific Glass Bubbles K-Series
3M™ Glass Bubbles K20, Small box (60 lb, 27 kg)K20 glass bubbles have a density of 0.2 g/cc and an isostatic crush strength of 500 psi. The general purpose K Series glass bubbles are the most economical 3M glass bubbles.
3M Id : 70-0704-2956-1GTIN(UPC/EAN) : 0 00 21200 86423 0
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M Global Mining : 3M™ Glass Bubbles K37, Small box (100 lb, 45.4 kg)
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Mining Specific Glass Bubbles K-Series
3M™ Glass Bubbles K37, Small box (100 lb, 45.4 kg)K37 glass bubbles have a density of 0.37 g/cc and an isostatic crush strength of 3000 psi. The general purpose K Series glass bubbles are the most economical 3M glass bubbles.
3M Id : 70-0704-5811-5GTIN(UPC/EAN) : 0 00 21200 87320 1
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M Global Mining : 3M™ Glass Bubbles S15, Small box (50 lb, 23 kg)
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Mining Specific Glass Bubbles S-Series
3M™ Glass Bubbles S15, Small box (50 lb, 23 kg)Because of their high strength-to-weight ratio and spherical shape, Scotchlite S15 glass bubbles are used by formulators to increase filler loading, lower viscosity, reduce shrinkage, reduce warping and increase buoyancy.
3M Id : 70-0703-2737-7GTIN(UPC/EAN) : 0 00 21200 83893 4
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M Global Mining : 3M™ Glass Bubbles S22, Small box (60 lb, 27 kg)
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Mining Specific Glass Bubbles S-Series
3M™ Glass Bubbles S22, Small box (60 lb, 27 kg)S22 glass bubbles have a density of 0.22 g/cc and an isostatic crush strength of 400 psi. The S Series glass bubbles have smaller particle sizes than the K Series.
3M Id : 70-0704-5823-0GTIN(UPC/EAN) : 0 00 21200 87332 4
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M Global Mining : 3M™ Glass Bubbles S38, Large box (680 lb, 309 kg)
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Mining Specific Glass Bubbles S-Series
3M™ Glass Bubbles S38, Large box (680 lb, 309 kg)S38 glass bubbles have a density of 0.38 g/cc and an isostatic crush strength of 4000 psi. The S Series glass bubbles have smaller particle sizes than the K Series.
3M Id : 70-0704-2970-2GTIN(UPC/EAN) : 0 00 21200 86437 7
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M Global Mining : 3M™ Fire Barrier CS-195+ Composite Sheet - 36" X 24" Boxed
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Site Safety Fire Protection Products Fire Barrier Composite Sheet
3M™ Fire Barrier CS-195+ Composite Sheet - 36" X 24" Boxed
[click to enlarge]
A 36" x 24" one-part composite system comprised of four components, used for shielding cable trays and conduit, HVAC ductwork and vital process equipment from radiant heat, flame spread and smoke.
3M Id : 98-0400-2407-1GTIN(UPC/EAN) : 0 00 51115 07220 8
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
CompositeSheet CS195 + pdf - Data Sheet (PDF 382.6 K)
InteramTapeT49 + pdf - Data Sheet (PDF 15.0 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Ideal for fire-stopping blank openings and through-penetrations of multiple cable, pipe ducts, buss ducts and cable trays. Intumescent. Lightweight and easy to handle - just cut and form to fit. Easy to install using common trade tools. Easy to fasten - bolt punch or drill through and use selftapping screws or anchor bolts. Bottom-of-floor applications available. No mixing or damming required.
Product Catalog for 3M Mining Site Safety Fire Protection Products Fire Barrier Composite Sheet
3M™ Fire Barrier CS-195+ Composite Sheet - 36" X 24" Boxed
3M™ Fire Barrier CS-195+ Composite Sheet - 36" X 24" Boxed
Printer-friendly
format
Additional Information
Ideal for fire-stopping blank openings and through-penetrations of multiple cable, pipe ducts, buss ducts and cable trays. Intumescent. Lightweight and easy to handle - just cut and form to fit. Easy to install using common trade tools. Easy to fasten - bolt punch or drill through and use selftapping screws or anchor bolts. Bottom-of-floor applications available. No mixing or damming required. Re-enterable. Documented aging properties.
3M Global Mining : 3M™ Fire Barrier CS-195+ Composite Sheet - 36" X 41" Boxed
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Site Safety Fire Protection Products Fire Barrier Composite Sheet
3M™ Fire Barrier CS-195+ Composite Sheet - 36" X 41" Boxed
[click to enlarge]
A 36" x 41" one-part composite system comprised of four components, used for shielding cable trays and conduit, HVAC ductwork and vital process equipment from radiant heat, flame spread and smoke.
3M Id : 98-0400-2409-7GTIN(UPC/EAN) : 0 00 51115 07224 6
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Ideal for fire-stopping blank openings and through-penetrations of multiple cable, pipe ducts, buss ducts and cable trays. Intumescent. Lightweight and easy to handle - just cut and form to fit. Easy to install using common trade tools. Easy to fasten - bolt punch or drill through and use selftapping screws or anchor bolts. Bottom-of-floor applications available. No mixing or damming required.
Product Catalog for 3M Mining Site Safety Fire Protection Products Fire Barrier Composite Sheet
3M™ Fire Barrier CS-195+ Composite Sheet - 36" X 41" Boxed
3M™ Fire Barrier CS-195+ Composite Sheet - 36" X 41" Boxed
Printer-friendly
format
Additional Information
Ideal for fire-stopping blank openings and through-penetrations of multiple cable, pipe ducts, buss ducts and cable trays. Intumescent. Lightweight and easy to handle - just cut and form to fit. Easy to install using common trade tools. Easy to fasten - bolt punch or drill through and use selftapping screws or anchor bolts. Bottom-of-floor applications available. No mixing or damming required. Re-enterable. Documented aging properties.
Product Catalog for 3M Mining Site Safety Fire Protection Products Fire Barrier Pipe Device Hose Clamp
Ultra
3M™ Interam™ Ultra Plastic Pipe Device UPPD2
[click to enlarge]
Used to firestop a 2" non-metallic pipe. One piece metal collar assembly encasing 3M's heat expanding Ultra GS, used for new and retrofit installations to achieve up to 3 hour fire ratings.
3M Id : 98-0400-5261-9GTIN(UPC/EAN) : 0 00 51115 08379 2
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Product Catalog for 3M Mining Site Safety Fire Protection Products Fire Barrier Pipe Device Hose Clamp
Ultra
3M™ Interam™ Ultra Plastic Pipe Device UPPD3
[click to enlarge]
Used to firestop a 3" non-metallic pipe. One piece metal collar assembly encasing 3M's heat expanding Ultra GS, used for new and retrofit installations to achieve up to 3 hour fire ratings.
3M Id : 98-0400-5262-7GTIN(UPC/EAN) : 0 00 51115 08380 8
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Product Catalog for 3M Mining Site Safety Fire Protection Products Fire Barrier Pipe Device Hose Clamp
Ultra
3M™ Interam™ Ultra Plastic Pipe Device UPPD4
[click to enlarge]
Used to firestop a 4" non-metallic pipe. One piece metal collar assembly encasing 3M's heat expanding Ultra GS, used for new and retrofit installations to achieve up to 3 hour fire ratings.
3M Id : 98-0400-5263-5GTIN(UPC/EAN) : 0 00 51115 08381 5
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M Global Mining : 3M™ Maintenance Sorbent Roll M-RL38150DD, High Capacity 1 Roll/Case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Site Safety Sorbents 3M™ Maintenance Sorbent Roll M-RL38150DD,
High Capacity 1 Roll/Case
3M™ Maintenance Sorbent Roll M-RL38150DD, High Capacity 1 Roll/Case
Additional Information
This sorbent pad has a scrim on one side to increase the strength and help eliminate linting. Available in a convenient width of 38 inches, perfect for lining drawers, covering workbenches, or masking larger areas from mist and overspray. Rolls of sorbent material are used to cover and sorb large spills or in areas where spills may occur. Conveniently packaged so that they may be cut to the desired length.
3M Global Mining : 3M™ Maintenance Sorbent Rug M-RGC36100E, with Coating 1 Rug/Case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Site Safety Sorbents 3M™ Maintenance Sorbent Rug M-RGC36100E,
with Coating 1 Rug/Case
3M™ Maintenance Sorbent Rug M-RGC36100E, with Coating 1 Rug/Case
Additional Information
This sorbent rug is used in areas where foot and vehicle traffic is an concern. Designed to sorb liquids while enduring the punishment of being tread upon, it is both durable and versatile. The coated rug material can be used on a clean and smooth floor to insure that the material does not slip when walked upon. It may also be used as a barrier to protect the floor or other surface below it from liquids leaking through.
3M Global Mining : 3M™ Safety-Walk™ General Purpose Tread Black, 1 in x 60 ft, 4 per case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Site Safety Traffic Control Products Safety-Walk™ General Purpose
Tread
3M™ Safety-Walk™ General Purpose Tread Black, 1 in x 60 ft, 4 per caseThis mineral-coated, slip-resistant material featrues a highly durable surface. Low-profile design reduces trip hazard.
3M Id : 70-0705-4351-0GTIN(UPC/EAN) : 5 00 48011 19220 3
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
For use on smooth, flat surfaces. Pressure sensitive adhesive, covered by a removable protective liner. Easy to apply.
Characteristics
Adhesives YesColor BlackLength 60 Linear Foot Primary Trademark Name 3M
Substrate Material Plastic FilmSurface Material MineralWidth 1 Inch
3M Global Mining : 3M™ Vinyl Tape 471 Red, 3 in x 36 yd, 12 per case Bulk
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Site Safety Traffic Control Products Vinyl Lane Marking Tape
3M™ Vinyl Tape 471 Red, 3 in x 36 yd, 12 per case Bulk
[click to enlarge]
3M™ Vinyl Tape 471 Red, 5.2 mil (0.13 mm), vinyl backing with a rubber adhesive, maintain color even when exposed to heavy abrasion, conformable, maintain color throughout not printed, dead stretch properties to provide straighter lines, clean removal
3M Id : 70-0024-0927-7GTIN(UPC/EAN) : 0 00 21200 06469 2
Additional Information
Learn More . . .
Packaging Data
Vinyl Tape 471 and 4712 - Data Sheet (PDF 11.6 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Vinyl Tape 471, ideal for masking, wrapping or sealing many curved or irregular surfaces, excellent for many lane and safety marking applications, ideal for color coding, abrasion protection, decoration and splicing applications
Characteristics
Adhesive Material Rubber ResinBacking Material Pigmented vinyl plasticColor RedLength 36 Linear Yard Primary Trademark Name 3M
3M Global Mining : 3M™ Vinyl Tape 471 White, 1/2 in x 36 yd, 72 per case Bulk
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Site Safety Traffic Control Products Vinyl Lane Marking Tape
3M™ Vinyl Tape 471 White, 1/2 in x 36 yd, 72 per case Bulk
[click to enlarge]
3M™ Vinyl Tape 471 White, 5.2 mil (0.13 mm), vinyl backing with a rubber adhesive, maintain color even when exposed to heavy abrasion, conformable, maintain color throughout not printed, dead stretch properties to provide straighter lines, clean remova
3M Id : 70-0024-1403-8GTIN(UPC/EAN) : 0 00 21200 03134 2
Additional Information
Learn More . . .
Packaging Data
Vinyl Tape 471 and 4712 - Data Sheet (PDF 11.6 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Vinyl Tape 471, ideal for masking, wrapping or sealing many curved or irregular surfaces, excellent for many lane and safety marking applications, ideal for color coding, abrasion protection, decoration and splicing applications
Characteristics
Adhesive Material Rubber ResinBacking Material Pigmented vinyl plasticLength 36 Linear Yard Primary Trademark Name 3M
3M Global Mining : 3M™ Vinyl Tape 471 Yellow, 1/2 in x 36 yd, 72 per case Bulk
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Site Safety Traffic Control Products Vinyl Lane Marking Tape
3M™ Vinyl Tape 471 Yellow, 1/2 in x 36 yd, 72 per case Bulk
[click to enlarge]
3M™ Vinyl Tape 471 Yellow, 5.2 mil (0.13 mm), vinyl backing with a rubber adhesive, maintain color even when exposed to heavy abrasion, conformable, maintain color throughout not printed, dead stretch properties to provide straighter lines, clean remov
3M Id : 70-0024-1303-0GTIN(UPC/EAN) : 0 00 21200 03126 7
Additional Information
Learn More . . .
Packaging Data
Vinyl Tape 471 and 4712 - Data Sheet (PDF 11.6 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Vinyl Tape 471, ideal for masking, wrapping or sealing many curved or irregular surfaces, excellent for many lane and safety marking applications, ideal for color coding, abrasion protection, decoration and splicing applications
Characteristics
Adhesive Material Rubber ResinBacking Material Pigmented vinyl plasticLength 36 Linear Yard Primary Trademark Name 3M
3M Global Mining : 3M™ Damping Foil 2552 Silver, 2 in x 36 yd 10.0 mil, 5 per case Bulk
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Worker Safety Hearing Protection 3M™ Damping Foil 2552 Silver, 2 in x
36 yd 10.0 mil, 5 per case Bulk
3M™ Damping Foil 2552 Silver, 2 in x 36 yd 10.0 mil, 5 per case Bulk
Additional Information
3M™ Damping Foil Tape 2552 helps damp vibrations on metal and plastic surfaces vibrating at their natural (resonant) frequency, consists of a pressure-sensitive viscoelastic polymer and aluminum foil constraining layer that effectively converts vibrational energy to negligible heat to reducing irritating noises and decreasing wear and tear on parts. Optimal temperature range from 32°F to 140°F (0°C to 60°C).
Lightweight, with a soft padded headband for extra comfort. Sliding tension adjustment system to help maintain a good fit. Recommended for moderately high noise situations (up to 95 dBA TWA).
3M Id : 70-0705-1763-9GTIN(UPC/EAN) : 5 00 51138 29334 0
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Attenuation Tables - Data Sheet (PDF 85.4 K)
Hearing Protection Products - Fax on Demand (PDF 125.2 K)
How to Use the Noise Reduction Rating (NRR) - Data Sheet (PDF 22.4 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Lightweight, with a soft padded headband for extra comfort, these padded ear muffs feature multi-position ear cups, contoured ear cushions and a sliding headband tension adjustment system. Recommended for moderately high noise situations (up to 95 dBA TWA). Noise reduction rating 24 dB. *Must see the Learn More Section - How to Use the NRR
Benefits
● Slim, durable plastic ear cups● Soft, foam-filled cushions stay soft after extensive use● Contoured ear cushions to enhance fit● Unique molded inserts provide large inner space for the ear and good fit● Wide padded headband for secure fit and comfort● 2-point mounting headband for low evenly distributed pressure and easy
handling● Unique tension adjustment system for exceptional individual fit and comfort● Lightweight (8 ounces)● Replacement cushions and inserts available (replacement parts kit 1442)
CharacteristicsPrimary Trademark Name 3M
http://products3.3m.com/catalog/ww/en001/mining/-/nod..._globalmining_3_0/command_AbcPageHandler/output_print (1 of 2)22/11/2006 12:55:41 PM
Durable, lightweight, easy to use ear muffs are comfortable for extended wear. Recommended for moderately high noise situations (up to 95 dBA TWA).
3M Id : 70-0705-1762-1GTIN(UPC/EAN) : 5 00 51138 29333 3
HEARING PROTECTION PRODUCTS
These hearing protection products help prevent hearing loss against certain noises. To provide proper protection, the hearing protector should be (1) suitable for the job, (2) fitted properly in/on the ear, (3) worn during all times of exposure to noise, and (4) replaced when damaged or otherwise necessary. Failure to fit and use hearing protectors according to these instructions will reduce their effectiveness. Failure to wear hearing protectors 100% of the time that you are exposed to hazardous noise may dramatically increase your risk of developing hearing loss. Keep ear plugs away from infants and small children. They may get caught in a child’s windpipe.
warning-web-13
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Attenuation Tables - Data Sheet (PDF 85.4 K)
Hearing Protection Products - Fax on Demand (PDF 125.2 K)
How to Use the Noise Reduction Rating (NRR) - Data Sheet (PDF 22.4 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Durable, lightweight, easy to use general purpose ear muffs feature multi-position ear cups mounted on a wide, forked headband for comfort and a secure fit. Roomy, durable ear cups help provide a reliable fit. Soft sealing cushions provide a consistent ear cup seal. Recommended for moderately high noise situations (up to 95 dBA TWA). Noise reduction rating 23 dB. *Must see the Learn More
Full Text . . .
http://products3.3m.com/catalog/ww/en001/mining/-/nod..._globalmining_3_0/command_AbcPageHandler/output_print (1 of 2)22/11/2006 12:55:59 PM
Select a Location
English
Email
Email
Email
Email
3M Global Mining : 3M™ General Purpose Ear Muff 1435 20/Case
Benefits
● Slim, durable plastic ear cups● Soft, foam-filled cushions stay soft after extensive use● Unique molded inserts provide large inner space for the ear and good fit● Wide headband for low pressure and comfortable, secure fit● 2-point mounting headband for low evenly distributed pressure and easy
handling● Lightweight (7.5 ounces)● Replacement cushions and inserts available (replacement parts kit 1437)
Product Catalog for 3M Mining Worker Safety Hearing Protection Ear Muffs 3M™ General Purpose
Ear Muff 1435 20/Case
3M™ General Purpose Ear Muff 1435 20/Case Printer-friendly
format
Additional Information
Durable, lightweight, easy to use general purpose ear muffs feature multi-position ear cups mounted on a wide, forked headband for comfort and a secure fit. Roomy, durable ear cups help provide a reliable fit. Soft sealing cushions provide a consistent ear cup seal. Recommended for moderately high noise situations (up to 95 dBA TWA). Noise reduction rating 23 dB. *Must see the Learn More Section - How to Use the NRR
These ear muffs can be attached to a wide variety of hard hats without additional adapters. Combines comfort and convenience. Recommended for moderately high noise situations (up to 95 dBA TWA).
3M Id : 70-0705-1764-7GTIN(UPC/EAN) : 5 00 51138 29335 7
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Hearing Protection Products - Fax on Demand (PDF 125.2 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Ear muffs for hard hats feature lightweight ear cups that attach to a variety of hard hats without additional adapters. The multi-position ear cups are beveled to fit comfortably under the hard hat. Ear cups flip up and lock in place when not in use. Contoured ear cushion for improved fit and comfort. Soft sealing cushions and molded foam ear cup inserts are easily replaceable. Noise
Product Catalog for 3M Mining Worker Safety Hearing Protection Ear Muffs 3M™ Hard Hat Mounted
Ear Muff 1450 20/Case
3M™ Hard Hat Mounted Ear Muff 1450 20/Case Printer-friendly
format
Additional Information
Ear muffs for hard hats feature lightweight ear cups that attach to a variety of hard hats without additional adapters. The multi-position ear cups are beveled to fit comfortably under the hard hat. Ear cups flip up and lock in place when not in use. Contoured ear cushion for improved fit and comfort. Soft sealing cushions and molded foam ear cup inserts are easily replaceable. Noise Reduction Rating: 23 dB. *Must see the Learn More Section - How to Use the NRR
Great alternative for employees who need intermittent hearing protection.
3M Id : 70-0707-5895-1GTIN(UPC/EAN) : 5 00 51138 66003 6
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
3M™ Banded Hearing Protector 1310 features foam ear pads attached to a lightweight band. The unique flexible band maintains low pressure over a wide range of head sizes. Convenient for people who take hearing protectors off and on many times each day. Noise Reduction Rating: 21 dB (band worn behind head) and 20 dB (band worn under chin) *Must see the Learn More Section - How to Use the NRR
Benefits
● Unique, flexible band makes fitting easy and maintains low pressure over a wide range of head sizes
● Soft foam pads close the ear canal opening without being inserted into the ear● Can be worn with band under-the-chin or behind-the-head● Band can be reused many times for less waste● Comfortable alternative to ear muffs and ear plugs● 3M™ Replacement Pads 1311(sold separately) are cost-effective and easy to
The comfortable fit of soft foam ear plugs with the convenience of a cord. Recommended for high noise situations (up to 100 dBA TWA).
3M Id : 70-0704-0631-2GTIN(UPC/EAN) : 5 00 51138 29009 7
HEARING PROTECTION PRODUCTS
These hearing protection products help prevent hearing loss against certain noises. To provide proper protection, the hearing protector should be (1) suitable for the job, (2) fitted properly in/on the ear, (3) worn during all times of exposure to noise, and (4) replaced when damaged or otherwise necessary. Failure to fit and use hearing protectors according to these instructions will reduce their effectiveness. Failure to wear hearing protectors 100% of the time that you are exposed to hazardous noise may dramatically increase your risk of developing hearing loss. Keep ear plugs away from infants and small children. They may get caught in a child’s windpipe.
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Soft, corded foam ear plugs that conform to the unique shape of each ear for excellent hearing protection and comfort. Features a cord for convenience and to prevent loss of ear plugs. Recommended for high noise situations (up to 100 dBA TWA). Noise Reduction Rating: 29 dB. *Must see the Learn More Section - How to Use the NRR
Benefits
● Tapered shape to fit the ear canal comfortably● Soft foam seals the ear comfortably● Smooth, dirt resistant surface for hygiene● Comfortable for a wide range of ear sizes● Hypo-allergenic material● Bright orange color for visibility● Can be combined with ear muffs for additional protection● Can be used with other personal protection equipment
http://products3.3m.com/catalog/ww/en001/mining/-/nod..._globalmining_3_0/command_AbcPageHandler/output_print (1 of 2)22/11/2006 12:57:13 PM
Soft, comfortable and unobtrusive hearing protection. Recommended for high noise situations (up to 100dBA TWA).
3M Id : 70-0704-0630-4GTIN(UPC/EAN) : 5 00 51138 29008 0
*The NRR may overestimate the protection provided during typical use. 3M recommends reducing the NRR by 50% for estimating the amount of noise reduction provided.
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Soft, comfortable ear plugs that conform to the unique shape of each ear for excellent hearing protection and comfort. Tapered to comfortably fit the ear canal. Recommended for high noise situations (up to 100dBA TWA). Noise Reduction Rating: 29 dB. *Must see the Learn More Section - How to Use the NRR
Benefits
● Tapered shape to fit the ear canal comfortably● Soft foam seals the ear comfortably● Smooth, dirt resistant surface for hygiene● Comfortable for a wide range of ear sizes● Hypo-allergenic material● Bright orange color for visibility● Can be combined with ear muffs for additional protection● Can be used with other personal protection equipment
Characteristics
Boxes per Case 5Primary Trademark Name 3M
http://products3.3m.com/catalog/ww/en001/mining/-/nod..._globalmining_3_0/command_AbcPageHandler/output_print (1 of 2)22/11/2006 12:57:32 PM
Select a Location
English
Email
Email
3M Global Mining : 3M™ Foam Ear Plug 1100, 1000/Case
Soft, elastic reusable ear plugs that are premolded for easy insertion into the ear without rolling. The multi-flanged design helps keep the ear plug securely in the ear to help provide comfortable and reliable protection.
3M Id : 70-0708-4300-1GTIN(UPC/EAN) : 5 00 51138 66226 9
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Attenuation Tables - Data Sheet (PDF 85.4 K)
How to Use the Noise Reduction Rating (NRR) - Data Sheet (PDF 22.4 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Recommended for moderately high noise situations (up to 95 dBA TWA). Noise Reduction Rating: 25 dB* *Must see the Learn More Section - How to Use the NRR
Benefits
● Multi-flanged plugs fit securely into ear canal● Soft, elastic material conforms to a wide range of ear sizes comfortably● No need to roll plugs down before inserting● Ideal for dusty, dirty situations● Can be washed and reused many times for less waste
3M Global Mining : 3M™ Acid Gas Cartridge 6002 60/Case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Worker Safety Respiratory Cartridges
3M™ Acid Gas Cartridge 6002 60/Case
[click to enlarge]
NIOSH approved against certain acid gases. Use with 3M™ Half and Full Facepieces 6000 Series and 3M™ Half and Full Facepieces 7000 Series with bayonet style cartridge holders.
3M Id : 70-0703-1676-8GTIN(UPC/EAN) : 5 00 51138 28880 3
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Warning - 5000, 6000, 7000 Series Cartridges - Info (PDF 19.0 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Use in a variety of applications including chemical manufacturing, glass etching, pulp and paper, and laboratories. When properly fitted, helps provide respiratory protection from chlorine, hydrogen chloride, sulfur dioxide, or chlorine dioxide, or hydrogen sulfide (escape only) at concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full
Product Catalog for 3M Mining Worker Safety Respiratory Cartridges 3M™ Acid Gas Cartridge 6002
60/Case
3M™ Acid Gas Cartridge 6002 60/Case Printer-friendly
format
Additional Information
Use in a variety of applications including chemical manufacturing, glass etching, pulp and paper, and laboratories. When properly fitted, helps provide respiratory protection from chlorine, hydrogen chloride, sulfur dioxide, or chlorine dioxide, or hydrogen sulfide (escape only) at concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Not for use in environments that are immediately dangerous to life or health (IDLH).
3M Global Mining : 3M™ Ammonia Methylamine Cartridge 6004 60/Case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Worker Safety Respiratory Cartridges
3M™ Ammonia Methylamine Cartridge 6004 60/Case
[click to enlarge]
NIOSH approved against ammonia and methylamine. Use with 3M™ Half and Full Facepieces 6000 Series and 3M™ Half and Full Facepieces 7000 Series with bayonet style cartridge holders.
3M Id : 70-0703-1674-3GTIN(UPC/EAN) : 5 00 51138 28882 7
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
6004 Ammonia, Methylamine Cartridge User - Instructions/Manual (PDF 41.3 K)
Warning - 5000, 6000, 7000 Series Cartridges - Info (PDF 19.0 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Use in a variety of applications including agriculture, chemical manufacturing, laboratories and the food industry. When properly fitted, helps provide respiratory protection from ammonia and methylamine at concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim
Use in a variety of applications including agriculture, chemical manufacturing, laboratories and the food industry. When properly fitted, helps provide respiratory protection from ammonia and methylamine at concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Not for use in environments that are immediately dangerous to life or health (IDLH).
NIOSH approved against formaldehyde and certain organic vapors. Use with 3M™ Half and Full Facepieces 6000 Series and 3M™ Half and Full Facepieces 7000 Series with bayonet style cartridge holders.
3M Id : 70-0703-1673-5GTIN(UPC/EAN) : 5 00 51138 28883 4
Warning - 5000, 6000, 7000 Series Cartridges - Info (PDF 19.0 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Use in a variety of applications, including laboratories, wood processing, carpet manufacturing, and primary metals manufacturing. When properly fitted, helps provide respiratory protection from formaldehyde and certain organic vapors at concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be
Use in a variety of applications, including laboratories, wood processing, carpet manufacturing, and primary metals manufacturing. When properly fitted, helps provide respiratory protection from formaldehyde and certain organic vapors at concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Not for use in environments that are immediately dangerous to life or health (IDLH). OSHA requires that gas-proof goggles be worn with half facepiece respirators when used against formaldehyde.
3M Global Mining : 3M™ Multi Gas/Vapor Cartridge 6006 60/Case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Worker Safety Respiratory Cartridges
3M™ Multi Gas/Vapor Cartridge 6006 60/Case
[click to enlarge]
NIOSH approved against certain organic vapors, acid gases, ammonia, methylamine or formaldehyde. Use with 3M™ Half and Full Facepieces 6000 Series and 3M™ Half and Full Facepieces 7000 Series with bayonet style cartridge holders.
3M Id : 70-0707-0947-5GTIN(UPC/EAN) : 5 00 51138 54186 1
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
6006 Multi Gas, Vapor Cartridge User - Instructions/Manual (PDF 35.8 K)
Multi Gas and Vapor Cartridges - Fax on Demand (PDF 83.1 K)
Warning - 5000, 6000, 7000 Series Cartridges - Info (PDF 19.0 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Use in a variety of applications, including petrochemical and chemical processing, utilities, pharmaceuticals, mining and primary metals. When properly fitted, helps provide respiratory protection from certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide (escape only), ammonia, methylamine, formaldehyde or hydrogen fluoride at concentrations up
Product Catalog for 3M Mining Worker Safety Respiratory Cartridges 3M™ Multi Gas/Vapor Cartridge
6006 60/Case
3M™ Multi Gas/Vapor Cartridge 6006 60/Case Printer-friendly
format
Additional Information
Use in a variety of applications, including petrochemical and chemical processing, utilities, pharmaceuticals, mining and primary metals. When properly fitted, helps provide respiratory protection from certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide (escape only), ammonia, methylamine, formaldehyde or hydrogen fluoride at concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Not for use in environments that are immediately dangerous to life or health (IDLH). OSHA requires that gas-proof goggles be worn with half facepiece respirators when used against formaldehyde.
3M Global Mining : 3M™ Organic Vapor Cartridge 6001 60/Case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Worker Safety Respiratory Cartridges
3M™ Organic Vapor Cartridge 6001 60/Case
[click to enlarge]
NIOSH approved against certain organic vapors. Use with 3M™ Half and Full Facepieces 6000 Series and 3M™ Half and Full Facepieces 7000 Series with bayonet style cartridge holders.
3M Id : 70-0703-1677-6GTIN(UPC/EAN) : 5 00 51138 21674 5
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Warning - 5000, 6000, 7000 Series Cartridges - Info (PDF 19.0 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Use in a variety of workplace applications, including petrochemical, chemical manufacturing, construction, transportation and electronics. When properly fitted, helps provide respiratory protection from certain organic vapors at concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit
Use in a variety of workplace applications, including petrochemical, chemical manufacturing, construction, transportation and electronics. When properly fitted, helps provide respiratory protection from certain organic vapors at concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Not for use in environments that are immediately dangerous to life or health (IDLH).
3M Global Mining : 3M™ Organic Vapor Cartridge GVP-401 6/Case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Worker Safety Respiratory Cartridges
3M™ Organic Vapor Cartridge GVP-401 6/Case
[click to enlarge]
This cartridge is used with the 3M™ Belt-Mounted and Vehicle-Mounted Powered Air Purifying Respirator (PAPR) Systems. It attaches to the motor blower and filters the air supplied to the headgear.
3M Id : 70-0705-1565-8GTIN(UPC/EAN) : 5 00 51138 29216 9
3M Global Mining : 3M™ Organic Vapor/Acid Gas Cartridge 6003/07047(AAD) 60/Case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Worker Safety Respiratory Cartridges
3M™ Organic Vapor/Acid Gas Cartridge 6003/07047(AAD) 60/Case
[click to enlarge]
NIOSH approved against certain organic vapors or acid gases. Use with 3M™ Half and Full Facepieces 6000 Series and 3M™ Half and Full Facepieces 7000 Series with bayonet style cartridge holders.
3M Id : 70-0703-1675-0GTIN(UPC/EAN) : 5 00 51131 07047 4
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
Warning - 5000, 6000, 7000 Series Cartridges - Info (PDF 19.0 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Use in a variety of applications, including pharmaceutical, petrochemical, utilities, aluminum reduction, chemical manufacturing, laboratories, and pulp and paper. When properly fitted, helps provide respiratory protection from certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, or hydrogen sulfide (escape only) or hydrogen fluoride at concentrations up to 10 times the
Product Catalog for 3M Mining Worker Safety Respiratory Cartridges 3M™ Organic Vapor/Acid Gas
Cartridge 6003/07047(AAD) 60/Case
3M™ Organic Vapor/Acid Gas Cartridge 6003/07047(AAD) 60/Case
Printer-friendly
format
Additional Information
Use in a variety of applications, including pharmaceutical, petrochemical, utilities, aluminum reduction, chemical manufacturing, laboratories, and pulp and paper. When properly fitted, helps provide respiratory protection from certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, or hydrogen sulfide (escape only) or hydrogen fluoride at concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Not for use in environments that are immediately dangerous to life or health (IDLH).
3M Global Mining : 3M™ Organic Vapor/Acid Gas Cartridge GVP-403 6/Case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Worker Safety Respiratory Cartridges
3M™ Organic Vapor/Acid Gas Cartridge GVP-403 6/Case
[click to enlarge]
This cartridge is used with the 3M™ Belt-Mounted and Vehicle-Mounted Powered Air Purifying Respirator (PAPR) Systems. It attaches to the motor blower and filters the air supplied to the headgear.
3M Id : 70-0705-1567-4GTIN(UPC/EAN) : 5 00 51138 29218 3
This cartridge is used with the 3M™ Belt-Mounted and Vehicle-Mounted Powered Air Purifying Respirator (PAPR) Systems. It attaches to the motor blower and filters the air supplied to the headgear.
3M Id : 70-0705-1571-6GTIN(UPC/EAN) : 5 00 51138 29222 0
Additional Information
Learn More . . .
Packaging Data
GVP-443 OV Cart Filter Line Art - Illustration/Line Art
3M Global Mining : 3M™ High Efficiency Filter GVP-440 8/Case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Worker Safety Respiratory Filters
3M™ High Efficiency Filter GVP-440 8/Case
[click to enlarge]
This cartridge is used with the 3M™ Belt-Mounted and Vehicle-Mounted Powered Air Purifying Respirator (PAPR) Systems. It attaches to the motor blower and filters the air supplied to the headgear.
3M Id : 70-0705-1568-2GTIN(UPC/EAN) : 5 00 51138 29219 0
NIOSH approved for environments containing certain oil and non-oil based particles. Use with 3M™ Respirators 5000 Series or Cartridges 6000 Series with 3M™ Adapter 502, 3M™ Facepieces 6000 Series, or 3M™ Facepieces 7000 Series with bayonet filter holder.
3M Id : 70-0706-1441-0GTIN(UPC/EAN) : 5 00 51131 07000 9
Particulate Filter 2091 or 07000, P100 - Fax on Demand (PDF 120.0 K)
Warning - 5000, 6000 Series Filters - Info (PDF 18.6 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
When properly fitted, use in a variety of applications including welding, brazing, torch cutting, metal pouring, soldering, and exposure to lead, asbestos, cadmium, arsenic, and MDA for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor
When properly fitted, use in a variety of applications including welding, brazing, torch cutting, metal pouring, soldering, and exposure to lead, asbestos, cadmium, arsenic, and MDA for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Do not use in environments that are immediately dangerous to life or health (IDLH).
NIOSH approved for environments containing certain oil and non-oil based particles. 3M recommended for relief against of organic vapors and ozone protection up to 10 times OSHA PEL. Not NIOSH certified for use against ozone.
3M Id : 70-0707-1094-5GTIN(UPC/EAN) : 5 00 51131 07184 6
Warning - 5000, 6000 Series Filters - Info (PDF 18.6 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Use with 3M™ Respirators 5000 Series or 3M™ Cartridge 6000 Series with 3M™ Adapter 502, 3M™ Facepieces 6000 Series or 3M™ Facepieces 7000 Series with bayonet filter holders. When properly fitted, use in a variety of applications including welding, brazing, torch cutting, metal pouring, soldering, and exposure to lead, asbestos, cadmium, arsenic, and MDA for concentrations up to 10 times the
Use with 3M™ Respirators 5000 Series or 3M™ Cartridge 6000 Series with 3M™ Adapter 502, 3M™ Facepieces 6000 Series or 3M™ Facepieces 7000 Series with bayonet filter holders. When properly fitted, use in a variety of applications including welding, brazing, torch cutting, metal pouring, soldering, and exposure to lead, asbestos, cadmium, arsenic, and MDA for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Also offers nuisance level relief from organic vapors that are below the PEL. *Nuisance level refers to concentrations not exceeding OSHA PEL or other applicable government occupational exposure limits, whichever is lower. Do not use for respiratory protection against acid gases or in environments that are immediately dangerous to life or health (IDLH).
3M Global Mining : 3M™ Airstream™ Headgear-Mounted Powered Air Purifying Respirator (PAPR) System AS-400LBC, Intrinsically Safe 1/Case
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Worker Safety Respiratory Respirators
3M™ Airstream™ Headgear-Mounted Powered Air Purifying Respirator (PAPR) System AS-400LBC, Intrinsically Safe 1/Case
[click to enlarge]
This system is lightweight and comfortable. No breathing tubes or hoses are required. Positive pressure helps keep out particles, and keep the faceshield fog-free.
3M Id : 70-0708-4591-5GTIN(UPC/EAN) : 0 00 51138 76559 0
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
061-44-01R01 Airflow Indicator User - Instructions/Manual (PDF 17.4 K)
Product Catalog for 3M Mining Worker Safety Respiratory Respirators
Full Facpiece Respirator
[click to enlarge]
Use with 3M™ Filters 2000 Series, 3M™ Filter 7093, P100, 3M™ Cartridges 6000 Series, or 3M™ Dual Airline Systems against a variety of gases, vapors and particulate hazards according to NIOSH approvals.
Make a Selection
3M™ Full Facepiece 6700, Small 4/CaseUse with 3M™ Filters 2000 Series, 3M™ Filter 7093 P100, 3M™ Cartridges 6000 Series, or 3M™ Dual Airline Systems against a variety of gases, vapors and particulate hazards according to NIOSH approvals.
3M™ Full Facepiece 6800, Medium 4/CaseUse with 3M™ Filters 2000 Series, 3M™ Filter 7093, P100, 3M™ Cartridges 6000 Series, or 3M™ Dual Airline Systems against a variety of gases, vapors and particulate hazards according to NIOSH approvals.
3M™ Full Facepiece 6900, Large 4/CaseUse with3M™ Filters 2000 Series, 3M™ Filter 7093, P100, 3M™ Cartridges 6000 Series, or 3M™ Dual Airline Systems against a variety of gases, vapors and particulate hazards according to NIOSH approvals.
Product Catalog for 3M Mining Worker Safety Respiratory Respirators Full Facpiece Respirator
Printer-friendly format 3M™ Full Facepiece 6700, Small 4/Case
[click to enlarge]
Use with 3M™ Filters 2000 Series, 3M™ Filter 7093 P100, 3M™ Cartridges 6000 Series, or 3M™ Dual Airline Systems against a variety of gases, vapors and particulate hazards according to NIOSH approvals.
3M Id : 70-0707-0904-6GTIN(UPC/EAN) : 5 00 51138 54145 8
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
6878 Spectacle Kit User - Instructions/Manual (PDF 66.5 K)
6885 Lens Cover User - Instructions/Manual (PDF 49.9 K)
6894 Nose Cup Assembly Replacement - Instructions/Manual (PDF 65.1 K)
Product Catalog for 3M Mining Worker Safety Respiratory Respirators Full Facpiece Respirator
Printer-friendly format 3M™ Full Facepiece 6800, Medium 4/Case
[click to enlarge]
Use with 3M™ Filters 2000 Series, 3M™ Filter 7093, P100, 3M™ Cartridges 6000 Series, or 3M™ Dual Airline Systems against a variety of gases, vapors and particulate hazards according to NIOSH approvals.
3M Id : 70-0707-0905-3GTIN(UPC/EAN) : 5 00 51138 54146 5
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
6878 Spectacle Kit User - Instructions/Manual (PDF 66.5 K)
6885 Lens Cover User - Instructions/Manual (PDF 49.9 K)
6894 Nose Cup Assembly Replacement - Instructions/Manual (PDF 65.1 K)
Product Catalog for 3M Mining Worker Safety Respiratory Respirators Full Facpiece Respirator
Printer-friendly format 3M™ Full Facepiece 6900, Large 4/Case
[click to enlarge]
Use with3M™ Filters 2000 Series, 3M™ Filter 7093, P100, 3M™ Cartridges 6000 Series, or 3M™ Dual Airline Systems against a variety of gases, vapors and particulate hazards according to NIOSH approvals.
3M Id : 70-0707-0918-6GTIN(UPC/EAN) : 5 00 51138 54159 5
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
6878 Spectacle Kit User - Instructions/Manual (PDF 66.5 K)
6885 Lens Cover User - Instructions/Manual (PDF 49.9 K)
6894 Nose Cup Assembly Replacement - Instructions/Manual (PDF 65.1 K)
http://products3.3m.com/catalog/ww/en001/mining/-/nod...w_globalmining_3_0/command_AbcPageHandler/output_html (2 of 2)22/11/2006 1:04:13 PM
3M Global Mining : Half Facepiece Respirator
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Worker Safety Respiratory Respirators
Half Facepiece Respirator
[click to enlarge]
Use with 3M™ Filters 2000 Series, 3M™ Filter 7093, P100, 3M™ Cartridges 6000 Series, or 3M™ Dual Airline Systems against a variety of gases, vapors and particulate hazards according to NIOSH approvals.
Make a Selection
3M™ Half Facepiece 6100/07024(AAD), Small 24/CaseUse with 3M™ Filters 2000 Series, 3M™ Filter 7093, P100, 3M™ Cartridges 6000 Series, or 3M™ Dual Airline Systems against a variety of gases, vapors and particulate hazards according to NIOSH approvals.
3M™ Half Facepiece 6200/07025(AAD), Medium 24/CaseUse with 3M™ Filters 2000 Series, 3M™ Filter 7093, P100, 3M™ Cartridges 6000 Series, or 3M™ Dual Airline Systems against a variety of gases, vapors and particulate hazards according to NIOSH approvals.
3M™ Half Facepiece 6300/07026(AAD), Large 24/CaseUse with 3M™ Filters 2000 Series, 3M™ Filter 7093, P100, 3M™ Cartridges 6000 Series, or 3M™ Dual Airline Systems against a variety of gases, vapors and particulate hazards according to NIOSH approvals.
Printer-friendly format 3M™ Half Facepiece 6100/07024(AAD), Small 24/Case
[click to enlarge]
Use with 3M™ Filters 2000 Series, 3M™ Filter 7093, P100, 3M™ Cartridges 6000 Series, or 3M™ Dual Airline Systems against a variety of gases, vapors and particulate hazards according to NIOSH approvals.
3M Id : 70-0703-1553-9GTIN(UPC/EAN) : 5 00 51131 07024 5
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
6000 Series Half Facepiece Family - 6100, 6200, 6300 - Product/Group Image- (TIFF)
6000 Series Half Facepiece User - Instructions/Manual (PDF 213.9 K)
Half and Full Facepiece Respirators 6000 Series Reusable - Fax on Demand (PDF 319.5 K)
Printer-friendly format 3M™ Half Facepiece 6200/07025(AAD), Medium 24/Case
[click to enlarge]
Use with 3M™ Filters 2000 Series, 3M™ Filter 7093, P100, 3M™ Cartridges 6000 Series, or 3M™ Dual Airline Systems against a variety of gases, vapors and particulate hazards according to NIOSH approvals.
3M Id : 70-0703-1554-7GTIN(UPC/EAN) : 5 00 51131 07025 2
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
6000 Series Half Facepiece Family - 6100, 6200, 6300 - Product/Group Image- (TIFF)
6000 Series Half Facepiece User - Instructions/Manual (PDF 213.9 K)
Half and Full Facepiece Respirators 6000 Series Reusable - Fax on Demand (PDF 319.5 K)
Printer-friendly format 3M™ Half Facepiece 6300/07026(AAD), Large 24/Case
[click to enlarge]
Use with 3M™ Filters 2000 Series, 3M™ Filter 7093, P100, 3M™ Cartridges 6000 Series, or 3M™ Dual Airline Systems against a variety of gases, vapors and particulate hazards according to NIOSH approvals.
3M Id : 70-0703-1555-4GTIN(UPC/EAN) : 5 00 51131 07026 9
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
6000 Series Half Facepiece Family - 6100, 6200, 6300 - Product/Group Image- (TIFF)
6000 Series Half Facepiece User - Instructions/Manual (PDF 213.9 K)
Half and Full Facepiece Respirators 6000 Series Reusable - Fax on Demand (PDF 319.5 K)
http://products3.3m.com/catalog/ww/en001/mining/-/nod...w_globalmining_3_0/command_AbcPageHandler/output_html (2 of 2)22/11/2006 1:04:52 PM
3M Global Mining : Particulate Respirators
3M Worldwide : Global : Mining
Product Catalog for 3M Mining Worker Safety Respiratory Respirators
Particulate Respirators
[click to enlarge]
Use 3M respirators to protect from dust and acid/gas particles and organic vapours.
Make a Selection
3M™ Particulate Respirator 8210, N95 160/CaseIs designed to help provide comfortable, reliable worker protection against certain non-oil based particles. Its lightweight construction helps promote greater worker acceptance and comfort and increased wear time.
3M™ Particulate Respirator 8214, N95, with Faceseal and Nuisance Level Organic Vapor Relief 80/CaseIs designed for applications such as welding, soldering and other operations where metal fumes may be present including those with ozone* and nuisance level** organic vapors.
3M™ Particulate Respirator 8233, N100 20/CaseIs well suited for those who want NIOSHs highest rated filtration efficiency in a maintenance free respirator. It provides a minimum filter efficiency of 99.97% against non-oil based particles.
3M™ Particulate Respirator 8246, R95, with Nuisance Level Acid Gas Relief 120/CaseHelps provide protection against certain oil and non-oil based aerosol particles including those present with nuisance levels of acid gases such as sulphur dioxide, hydrogen fluoride, and/or chlorine.
3M™ Particulate Respirator 8514, N95, with Nuisance Level Organic Vapor Relief 80/CaseDesigned for applications such as welding, soldering and other operations where metal fumes are present including those with ozone and nuisance level organic vapors.
3M™ Particulate Respirator 8576, P95, with Nuisance Level Acid Gas Relief 80/CaseDesigned to provide comfortable, reliable worker protection against certain oil and non-oil based aerosol particles including those present with nuisance levels of acid gases such as sulphur dioxide, hydrogen fluoride, and/or chlorine.
3M™ Particulate Welding Respirator 8212, N95, with Faceseal 80/CaseIs designed for applications such as welding, soldering and other operations where metal fumes may be present.
3M™ Particulate Welding Respirator 8512, N95 80/CaseIs designed for applications such as welding, soldering and other operations where metal fumes are present.
Printer-friendly format 3M™ Particulate Respirator 8210, N95 160/Case
[click to enlarge]
Is designed to help provide comfortable, reliable worker protection against certain non-oil based particles. Its lightweight construction helps promote greater worker acceptance and comfort and increased wear time.
3M Id : 70-0706-1439-4GTIN(UPC/EAN) : 5 00 51138 46457 3
Particulate Respirators 8210 and 8110S, N95 - Fax on Demand (PDF 102.7 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Workplace applications include grinding, sanding, sweeping, bagging and other dusty operations. This respirator features 3M's Advanced Electret Media (AEM), welded strap attachment, soft nose foam and adjustable noseclip to help provide a custom fit and secure seal.
Printer-friendly format 3M™ Particulate Respirator 8214, N95, with Faceseal and Nuisance Level Organic Vapor Relief 80/Case
[click to enlarge]
Is designed for applications such as welding, soldering and other operations where metal fumes may be present including those with ozone* and nuisance level** organic vapors.
3M Id : 70-0707-9953-4GTIN(UPC/EAN) : 5 00 51138 66192 7
* 3M recommended for ozone protection up to 10 times the OSHA PEL or applicable government occupational exposure limits, whichever is lower. Not NIOSH approved for use against ozone.
** 3M recommended for relief against nuisance levels of organic vapors. Nuisance level refers to concentrations not exceeding OSHA PEL or applicable government occupational exposure limits, whichever is lower.
Particulate Respirators 8214 and 8514, N95 - Fax on Demand (PDF 192.4 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
This respirator is designed for applications such as welding, soldering and other operations in which metal fumes may be present, including those present with ozone* and nuisance levels** of organic vapors. It can also be used in grinding, sanding, sweeping, bagging and other dusty/hot operations. It is especially well-suited for foundry operations, lab settings, undercoating and petrochemical
Full Text . . .
CharacteristicsPrimary Trademark Name 3M
http://products3.3m.com/catalog/ww/en001/mining/-/nod...w_globalmining_3_0/command_AbcPageHandler/output_html (1 of 2)22/11/2006 1:05:23 PM
Select a Location
English
By Keyword
Email
Email
Email
Email
Email
3M Global Mining : 3M™ Particulate Respirator 8214, N95, with Faceseal and Nuisance Level Organic Vapor Relief 80/Case
Printer-friendly format 3M™ Particulate Respirator 8233, N100 20/Case
[click to enlarge]
Is well suited for those who want NIOSHs highest rated filtration efficiency in a maintenance free respirator. It provides a minimum filter efficiency of 99.97% against non-oil based particles.
3M Id : 70-0707-0901-2GTIN(UPC/EAN) : 5 00 51138 54143 4
Particulate Respirator 8233, N100 User - Instructions/Manual (PDF 286.6 K)
Particulate Respirators 8233 and 8293, N100 - Fax on Demand (PDF 150.2 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
This respirator is an excellent choice for lead abatement, pharmaceutical manufacturing, welding, metal pouring and work involving OSHA substance specific particle exposures in concentrations up to 10 x the OSHA PEL, excluding asbestos. It features the 3M™ Cool Flow™ Exhalation Valve, comfortable foam faceseal, adjustable straps, and lightweight construction. Respirators are individually
Printer-friendly format 3M™ Particulate Respirator 8246, R95, with Nuisance Level Acid Gas Relief 120/Case
[click to enlarge]
Helps provide protection against certain oil and non-oil based aerosol particles including those present with nuisance levels of acid gases such as sulphur dioxide, hydrogen fluoride, and/or chlorine.
3M Id : 70-0707-5771-4GTIN(UPC/EAN) : 5 00 51138 54357 5
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
8246 R95 Particulate Resp User - Instructions/Manual (PDF 268.7 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Suggested applications include glass etching, chemical processing, paper processing, aluminum smelting and brewing operations. Its lightweight construction promotes greater worker comfort and contributes to increased wear time.
Printer-friendly format 3M™ Particulate Respirator 8514, N95, with Nuisance Level Organic Vapor Relief 80/Case
[click to enlarge]
Designed for applications such as welding, soldering and other operations where metal fumes are present including those with ozone and nuisance level organic vapors.
3M Id : 70-0708-4388-6GTIN(UPC/EAN) : 5 00 51138 66299 3
Particulate Respirators 8214 and 8514, N95 - Fax on Demand (PDF 192.4 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
This respirator is designed for applications such as welding, soldering and other operations in which metal fumes are present, including those present with ozone (3M recommended for 10 x OSHA PEL) and nuisance levels of organic vapors (below OSHA PEL). It can also be used in grinding, sanding, sweeping, bagging and other dusty/hot operations. It is especially well-suited for foundry operations,
Printer-friendly format 3M™ Particulate Respirator 8576, P95, with Nuisance Level Acid Gas Relief 80/Case
[click to enlarge]
Designed to provide comfortable, reliable worker protection against certain oil and non-oil based aerosol particles including those present with nuisance levels of acid gases such as sulphur dioxide, hydrogen fluoride, and/or chlorine.
3M Id : 70-0707-5793-8GTIN(UPC/EAN) : 5 00 51138 54370 4
Additional Information
Learn More . . .
Packaging Data
MSDS (United States)
8576 P95 Particulate Resp User - Instructions/Manual (PDF 118.0 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
An excellent choice for work settings that involve heat, humidity and long wear periods. Suggested applications include glass etching, chemical processing, paper processing, aluminum smelting and brewing operations. Its lightweight construction promotes greater worker comfort and contributes to increased wear time.
Particulate Respirators 8212 and 8512, N95 - Fax on Demand (PDF 163.4 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Workplace applications include welding, brazing, soldering, torch cutting, and metal pouring, as well as grinding, sanding, sweeping, bagging and other dusty/hot operations. It features the 3M™ Cool Flow™ Exhalation Valve, cake-resistant filter media, a comfortable foam faceseal and fully adjustable straps.
Particulate Respirators 8212 and 8512, N95 - Fax on Demand (PDF 163.4 K)
Please Note:Adobe® Acrobat® Reader is required to view PDF documents.
Workplace applications include welding, brazing, soldering, torch cutting, and metal pouring, as well as grinding, sanding, sweeping, bagging and other dusty/hot operations. It features the 3M™ Cool Flow™ Exhalation Valve, cake-resistant filter media, nose foam, and fully adjustable noseclip and straps.
