1
and compact retraction assembly; no separate valve is required. A cam-activated automatic-locking mechanism, SafeLoc TM, and the short-stroke (45 mm/1.75 in.) design of the 3719 help to assure operator safety. The 3719 pro- vides sealed pneumatic dampen- ing for smooth and safe operation and a large reference volume for long electrode life; protects elec- trode sensing surface from break- age; and is suitable for mounting in any orientation. Circle 418 on reader service card MASI,(TNG MADE SIMPLE SPEEDiI~IASK-" UV-Cltrable Masking Resins ~mpi~ yourmasidng process prior to surface preparation and finishing operalio~. Benefices , Apply and Cure in Seconds . Easy to Use = Environmentafly Friendly , Solvent-Free - Acid & Plating Solution Resistant - Can Be Peei~, Washed or Burned Off Leaves No Residue Faster Than Other Masking Methods App|icatiens • Grit Nasting - AcidStripNng = Shot Peening Grinding • P~ating , PlasmaSprayCoating w~-~,cOmpom~t°oom 800-262-7763 Circle 028 on reader information card or go to www.thru.to/webconnect EXTRUSION POWOER ¢OA11NG Walgren Co. www. walgren.com Walgren has introduced a new system for the production powder coating of aluminum extrusions. This horizontal-design, power- and-free system powder coats up to 2,200 lb/hr and extrusions up to 22 ft in length. Typical pre- treatment includes an overhead hoist with bulk handling of parts in baskets and immersion tanks. Ovens are sized smaller than con- ventional systems because racks index through the oven perpendi- cular to the line of travel. Circle 419 on reader service card |LE¢1110~ NICKEl. TECHNOLOGY Sirius Technology www.sirius-tech, com Sirius Technology is pleased to introduce MILLENIUM MS-9, a mirror-bright, ultrastable electro- TURN KEY FINISHING EQUIP Finishing Equipment Systems • Hoist systems for Barrel, or Rack. • Batch and/or random processing capabilities • Split Rail machine, single or double file • Fully customization to meet customer needs npany has acquired UNIFIED EQUIPMENT SYSTEMS (UES) formerly ~.NT CO. and will continue to provide replacement parts for UDYLtTE automauc macmnes including the CYCLEMASTER, SENIOR SPLIT-RAIL and OBLIQUE BARREL machines. Auto Technology Company is the ONLY SUPPLIER able to manufacture this equipment and provide the parts using the original prints, molds and models. Environmental Test Chambers • Cyclic Corrosion Chambers • Salt Fog & Humidity Chambers • Walk-in, Drive-in and Multi Gas test chambers Centrifugal Dryers • 75 to 800 pound capacity, • Choice of 6 sizes • Heating ! Auto Technology Company 20026 Progress Drive, Strongsville, Ohio 44149 Tel: 1-800-433-8336 Fax (440) 572-7800 Circle 018 on reader information card or go to www.thru.to/webconnect less nickel process. Due to its unique blend of complexors and additives, the medium-phosphorus process is ideally suited for less than optimal operating conditions. MILLENIUM MS-9 is simple to operate and maintains consistent brightness and plating speed over the life of the bath. Circle 420 on reader service card June 2004 119 and compact retraction assembly; no separate valve is required. A cam-activated automatic-locking mechanism, SafeLoc TM, and the short-stroke (45 mm/1.75 in.) design of the 3719 help to assure operator safety. The 3719 pro- vides sealed pneumatic dampen- ing for smooth and safe operation and a large reference volume for long electrode life; protects elec- trode sensing surface from break- age; and is suitable for mounting in any orientation. Circle 418 on reader service card MASI,(TNG MADE SIMPLE SPEEDiI~IASK-" UV-Cltrable Masking Resins ~mpi~ yourmasidng process prior to surface preparation and finishing operalio~. Benefices , Apply and Cure in Seconds . Easy to Use = Environmentafly Friendly , Solvent-Free - Acid & Plating Solution Resistant - Can Be Peei~, Washed or Burned Off Leaves No Residue Faster Than Other Masking Methods App|icatiens • Grit Nasting - AcidStripNng = Shot Peening Grinding • P~ating , PlasmaSprayCoating w~-~,cOmpom~t°oom 800-262-7763 Circle 028 on reader information card or go to www.thru.to/webconnect EXTRUSION POWOER ¢OA11NG Walgren Co. www. walgren.com Walgren has introduced a new system for the production powder coating of aluminum extrusions. This horizontal-design, power- and-free system powder coats up to 2,200 lb/hr and extrusions up to 22 ft in length. Typical pre- treatment includes an overhead hoist with bulk handling of parts in baskets and immersion tanks. Ovens are sized smaller than con- ventional systems because racks index through the oven perpendi- cular to the line of travel. Circle 419 on reader service card |LE¢1110~ NICKEl. TECHNOLOGY Sirius Technology www.sirius-tech, com Sirius Technology is pleased to introduce MILLENIUM MS-9, a mirror-bright, ultrastable electro- TURN KEY FINISHING EQUIP Finishing Equipment Systems • Hoist systems for Barrel, or Rack. • Batch and/or random processing capabilities • Split Rail machine, single or double file • Fully customization to meet customer needs npany has acquired UNIFIED EQUIPMENT SYSTEMS (UES) formerly ~.NT CO. and will continue to provide replacement parts for UDYLtTE automauc macmnes including the CYCLEMASTER, SENIOR SPLIT-RAIL and OBLIQUE BARREL machines. Auto Technology Company is the ONLY SUPPLIER able to manufacture this equipment and provide the parts using the original prints, molds and models. Environmental Test Chambers • Cyclic Corrosion Chambers • Salt Fog & Humidity Chambers • Walk-in, Drive-in and Multi Gas test chambers Centrifugal Dryers • 75 to 800 pound capacity, • Choice of 6 sizes • Heating ! Auto Technology Company 20026 Progress Drive, Strongsville, Ohio 44149 Tel: 1-800-433-8336 Fax (440) 572-7800 Circle 018 on reader information card or go to www.thru.to/webconnect less nickel process. Due to its unique blend of complexors and additives, the medium-phosphorus process is ideally suited for less than optimal operating conditions. MILLENIUM MS-9 is simple to operate and maintains consistent brightness and plating speed over the life of the bath. Circle 420 on reader service card June 2004 119
