Date post: | 14-Jun-2015 |
Category: |
Documents |
Upload: | adhenderson |
View: | 355 times |
Download: | 2 times |
ANRGS 12-2-2011
Advanced NRG Solutionsand LVD
Working together saving energy, lighting the world
ANRGS 12-2-2011
Advanced NRG Solutions is a multifaceted independent representative, engineering consulting and business broker firm. Founded in 2008 (actually 2007) to work with past, existing and future partners interested in networking, alternative energy solutions, commodities profits and energy saving products from tank-less water heaters to premium lighting to solar products, bio-fuels and transportation implementing compressed air technology. We facilitate you working directly with manufacturers bringing the best technologies to you without distributor mark up.
LVD™ Founded in 1989, Shanghai Hongyuan is a professional lighting company combining research and development, manufacturing, and sales direct from the manufacturer via our representative.Invented in 2003 with over 100 World Wide Patents, LVD™ is the first company to produce this electrode-less lamp on a large scale and their focusing on promoting this product (and only this product) around the world. In terms of its unique features and advantages, LVD™ Lamps bring the end-users many benefits including better lighting, electricity cost reduction, re-lamping/maintenance cost reduction, air-conditioning cost reduction, safety and security by improved lighting, productivity increases as well as providing better visibility including depth perception.
ANRGS 12-2-2011
Induction Lamps Vs. LED Lamps:
While induction lamp technology has matured in the last few years, it is often overlooked or underutilized in lighting applications since none of the major manufacturers promote induction lamps in any significant way. LED lighting seems to get the most “buzz” in the market as LED’s are promoted as the best alternative to conventional lighting due to their longevity.
Induction lamps have a lifespan of 60,000 to 100,000 hours (depending on type and model), which is much longer than the typical high-power white LED lamp lifespan which is in the 50,000 to 55,000 range.
The major difference between the technologies (other than lifespan) is in conversion efficiency (energy utilization), full spectrum lighting and costs.LED lighting fixtures have conversion efficiencies in the 35 to 60 Lumens/Watt (L/W) range and are improving. Induction lamps have a conversion efficiency ranging from 65 L/W in low wattage (8 ~ 20 W internal inductor types) to >90 L/W in the high wattage (250 ~ 400 W external inductor models) range.
In some applications, advanced energy saving technologies like solar panels incorporated into the fixtures can provide energy savings greater than 75%.
ANRGS 12-2-2011
Advantages of Induction versus LED:
• Longer lasting >100,000 hours; LED spec's are typically rated for the LED and not the supporting circuitry needed to drive the LED’s.• No inconsistency in light; LED's must use array's and the solder joints for the array's have a tendency to fail causing two or three individual LED's not to light which effects the overall light supplied. Ever look close at an LED Stop Light? You will typically see 2 or three black holes... bad solder joint's!• >90 Watts per Lumen output @ the lowest operating power consumption and cost per hour; estimated cost saving's are $.067 per operating hour verses $.25 per operating hour for LED lighting; LED lighting is typically expensive due to the lighting array required to achieve the desired lumens and the heat sinking for the LED driver circuitry. The heat sinks absorbed the wasted energy in the form of heat from the driver circuitry. Color temperatures available up to 6500 Kelvin.• Eco-friendly... uses less than 2mg of mercury which is encapsulated and able to be recycled. No possible lead waste disposal required as associated with LED; some are lead free but you must verify.• Effectively the complete induction lamp is 99.6% recyclable.• Doesn't waste energy in the form of heat; although if heat is needed for melting of snow and or ice, clear flexible heaters could be implemented on the fixtures to address that.• Lower Cost; LED Street light complete fixtures can cost as much as $500 per complete fixture or more where Electromagnetic Induction is less than half that price! • This equates to a faster return on investment.
ANRGS 12-2-2011
Examples of applicationsExamples of applications
Case StudiesCase Studies
Energy Saving’sEnergy Saving’s
Project Design ReferencesProject Design References
`
The following slides are comparisons to the most prevalent technology used in road lighting… High Pressure Sodium.
ANRGS 12-2-20112009-3-23
Typical Case Study
ANRGS 12-2-20112009-3-23
ANRGS 12-2-2011
Examples of street light and tunnel applications; the top two are using solar panels
ANRGS 12-2-2011
Examples of high bay lighting in factory and indoor applications
ANRGS 12-2-2011
( 1 ) Re-lamping ProjectLocation: Caiyuan Road,
Chongqing,China
Before: Bad Color Rendering Index
After: Good Color Rendering Index 200W LVD r
eplaces 400W H
PS
LVD = Electromagnetic Induction lightingHPS = High Pressure Sodium
ANRGS 12-2-2011
主干道
LVD: 200W
1. Road illumination
2. Overall uniformity
3. Vertical uniformity
4. Glare.
>57% Energy reduction vs. HPS system
4 Road Requirements:
ANRGS 12-2-20112009-3-23
Nanpu Bridge: total length – 8346 meters, Center span: 423 meters First steel and concrete composite girdercable-stayed bridge built in China
ANRGS 12-2-2011
Before: 18 lux After: 36 lux
( 2 ) Project LocationNanpu Bridge, Shanghai,China
The lux (symbol: lx) is the SI unit of illuminance and luminous emittance.
It is used in photometry as a measure of the apparent intensity of light hitting or passing through a surface.
One lux is equal to one lumen per square meter, where 4π lumens is the total luminous flux of a light source of one candela of luminous intensity:
1 lx = 1 lm·m-2 = 1 cd·sr·m–2.
ANRGS 12-2-2011
Before After
Lamptype qty type qty
高压钠灯 548 无极灯 548
Electric bill49,320 Rmb/month 28,770 Rmb/month
591,840 Rmb/year 345,240 Rmb/year
Maintenance 38,360 Rmb/year 0 Rmb/year
Total 630,200 Rmb/year 345,2402 Rmb/year
Saving electric bill
284,960.00 RMB/year$41,734.65 USD/year
energy50,005 kWh/month 29,171 kWh/month
600,060 kWh/year 350,052 kWh/year
Saving energy
250,008 kWh/year
Energy Saving analysis
250W HPS 150W LVD
( 2 ) Project LocationNanpu Bridge, Shanghai,China
Rmb = Renminbi, the currency of the People's Republic of China 1 Chinese Yuan Renminbi = 0.14646 US Dollar 1 US Dollar (USD) = 6.82790 Chinese Yuan Renminbi (CNY)
ANRGS 12-2-2011
Meets all utility requirements.
Operates in both cold and hot climate without dramatic degradation of light output <= 5% @ 4,000 Hrs
Uses 30- >60% less energy than High Pressure Sodium.
Reduce the light reflected fromthe road surface.
( 3 ) Project Location:
Meridian Street, Groton, USA
ANRGS 12-2-2011
Left: LVD- 86lux
Right: HPS- 42lux
( 4 ) Project Location: Korea
*A comparison of technologies on the same street; more than double the lux.
ANRGS 12-2-2011
( 5 ) Project Location: West Africa installing a 0639-80W unit.
*Consider using solar panels in conjunction for increased energy efficiency.
ANRGS 12-2-2011
( 6 ( Project Location: Canada using a 0639-80W unit.
HPS
The left and center pictures are the same location; the right shows it across from HPS
ANRGS 12-2-2011
Thank You!
Shanghai Hongyuan Lighting & Electric Equipment Co., Ltd
Original version created 4-5-2009
By Calvin Zhu and modified by Andre D. Henderson, Sr.
For answer’s to your questions, pricing and quotes please contact:
Andre D. Henderson, Sr.Advanced NRG SolutionsPhone: (972) 412-2822Email: [email protected]: http://www.advancednrgsolutions.com/LVD/html