ElecWorks SORs

SCHEDULE OF RATES ELECTRICAL WORKS AND MAINTENANCE OF

LIGHTING TO CARPARKS AND AMENITIES

C O N T E N T S

SECTION DESCRIPTION SOR PAGE

GENERAL PREAMBLE GP 1 - GP 2

A LIGHTING AND FAN POINT 1 - 3

B RISING MAIN/SUBMAIN/CIRCUIT WIRING AND CABLE 3 - 6

C CABLE GLAND & LUG 7 – 8

D CONDUIT, TRUNKING AND CABLE TRAY 8 – 11

E SWITCH, SOCKET OUTLET AND CONSUMER UNIT 11 – 13

F CONNECTOR, CUT-OUT, FUSE, TAP-OFF UNIT AND CIRCUIT BREAKER

13 – 17

G SWITCHBOARD, DISTRIBUTION BOARD AND SWITCHROOM ACCESSORIES

17 – 20

H INDOOR LUMINAIRE/LIGHT FITTING 20 – 50

I FAN 51 – 52

J LAMP, BULB, TUBE AND BALLAST 52 – 58

K LANTERNS 59 – 94

L LIGHTING COLUMN 94 – 100

M BOLLARD LIGHTING 100 – 105

N FLOODLIGHT/SPOTLIGHT/STEPLIGHT/BURIED LIGHT 106 – 117

P WEATHERPROOF BOX AND METAL ENCLOSURE 117 – 118

Q LIGHTNING PROTECTION SYSTEM 118 – 120

R LABOUR ONLY ITEM 120 – 124

S MISCELLANEOUS 124 – 125

T EXCAVATION AND TRENCHING 126 – 127

U DAYWORK 127 – 128

V OTHERS 129 - 130

W NEW LED LUMINAIRES 131

KMC/may/Elect-Preamble (FY12).doc (1) (12-01-2012) (CD 2012 Edition)

GP 1

SCHEDULE OF RATES

ELECTRICAL WORKS AND MAINTENANCE

OF LIGHTING TO CARPARKS AND AMENITIES

GENERAL PREAMBLES 1. The clauses in the General Preambles shall apply to all work items contained in the

Standard Schedule of Rates. 2. All rates include the allowance for complying with the General Preambles and

Specifications. 3. All rates contained in the Standard Schedule of Rates are exclusive of any Goods and

Service Tax. Any such Goods and Service Tax shall be borne by the Town Council as and when the same becomes due and payable.

4. All works, materials and goods described in this Schedule of Rates shall be of the

respective kinds described in the Contract and shall conform to the Specifications, Public Utilities Board, Energy Market Authority and other relevant Statutory Requirements and to be approved by the Superintending Officer.

5. The description given for each item shall unless otherwise stated, be held to include the use

of materials, labour, transport, equipment, tools, mobile lifting work platform, boom lift, hacking, supply of fuel and all idle time, conveyance, delivery, unloading, storing, hoisting, stools/ladders, all labour for setting, fitting, fixing in position, connection, all cutting and waste, return of packings, establishment charges, overheads, profit and all forms of claim for loss and expenses, labour for preparing surface to receive work, dismantling, protecting materials and work, making good all affected works and disposal of fittings including checking, tracing and clearing of fault (if any) before installation and testing after installation.

6. All rates in the Schedule (only applicable for street/garden lights) shall include boomlift, fuel

and driver where mean of access can be used. If mean of access cannot be used, any height above 6 metres shall be paid according to Clause 7 of the General Preambles.

7. No scaffold (other than a tower scaffold and trestle scaffold) exceeding 4 metres shall be

erected, installed, re-positioned, altered or dismantled except by an approved Scaffold Contractor. An approved Scaffold Contractor shall engage a qualified Scaffolding Supervisor to ensure that the scaffold is erected, installed, re-positioned, altered or dismantled in accordance with the Regulations. The 4 metres height is defined as the distance between the ground level where scaffold rests and the level of the highest working platform. The Schedule of Rates have taken into consideration of the scaffolding cost for height not exceeding 4 metres. The Contractor shall be paid separately for the scaffolding if its height exceeds 4 metres.

8. All rates in the Schedule shall be applicable for new and replacement works unless

otherwise stated. The rate for each item for the installation/fixing of parts/fittings shall unless otherwise stated, deemed to include all staples, clips, screws bolts, PVC connectors, rawl plug ramset brackets and other fixing accessories necessary for the satisfactory completion of the installation works.

8. Unless otherwise stated, all works shall be measured nett as fixed in its place. 9. If there is any disagreement between the Town Council and the Term Contractor on any of

the items, the Town Council’s assessment shall be taken as final. 10. The term "as specified" means as specified in all Specifications, Works Order and/or

drawings.

ID: KMC/iy/Elect-Preamble (FY11).doc (2) (19.10.10) (May/147-3)

GP 2

SCHEDULE OF RATES

ELECTRICAL WORKS AND MAINTENANCE

OF LIGHTING TO CARPARKS AND AMENITIES

GENERAL PREAMBLES 11. The following abbreviations are used for the units :- m - Linear metre m² - Square metre m³ - Cubic metre no. - Number pt - Point set - Complete set job - Per job pole - Per lighting column test - Per test tube - Per tube hr - Per Hour box - Per box 12. Where brand, trade names or catalogue numbers are given in the description, they are

solely intended for fixing the rates of the items. The products and materials to be used in the Contract shall be governed by the specifications, drawings, other documents forming the contract and/or subject to the approval of the Superintending Officer.

13. Daywork’s Schedule of Rates for LABOUR and PLANTS (Items U001 to U010) is inclusive

of 15% Establishment Charges and Profit. The contract percentages adjustment shall also apply.

14. For computation of ‘STAR’ rate using Daywork’s Schedule of Rates, the contract

percentages adjustment shall NOT apply to the ‘STAR’ rates computation. 15. In the case of claim under dayworks, the Contractor shall keep proper records of the

names, occupations and working hours of all workmen employed for such work and the quantities and descriptions of all materials and plant employed. Such records, receipts or vouchers must be verified by the Superintending Officer's Representative before payment can be effected. Provided always if the Superintending Officer's Representative shall consider that for any reason the keeping of such records, receipts and vouchers by the Contractor as required was impracticable, he shall nevertheless be entitled to authorise payment for such work either as daywork (on being satisfied as to the time employed and plant and materials used on such work) or at such value thereof as he shall consider fair and reasonable.

ID: KMC/iy/Elect-Preamble (FY11).doc (3) (19.10.10) (May/147-3)

SOR Page 1

SECTION CODE PICTURE DESCRIPTION UNIT RATE ($)

A. LIGHTING AND FAN POINT

LIGHTING/FAN POINT'S WIRING IN PVC

TRUNKING

* Surface wiring of 2.5 mm2 PVC sheathed

cables and 2.5mm2 PVC earth cable in

PVC trunking including surface mounted

white plate switch with PVC mounting box

but excluding batten lamp-holder, ceiling

rose, fitting, fan regulator and

fan *(001 007)

A 001 NA One lighting or fan point controlled by a No. 18.35 E A 1

1-gang switch (trunking run not exceeding

8m)


1-gang switch (trunking run exceeding 8m

but not exceeding 12m)

A 003 NA Two lighting or fan points controlled by a No. 36.50 E A 3

2-gang switch (trunking run not exceeding

12m)

A 004 NA Three lighting or fan points controlled by No. 58.65 E A 4

a 3-gang switch (trunking run not

exceeding 18m)

A 005 NA Each additional lighting or fan point in No. 11.20 E A 5

one loop switch circuit to items A1 to

A4 (trunking run not exceeding 5m)


one looping circuit to items A1 to

A4 (trunking run exceeding 5m but not

exceeding 10m)

A 007 NA One lighting point or fan point controlled No. 31.80 E A 7

by a two 2-way switch (trunking run not

exceeding 12m)

LIGHT/FAN POINT'S WIRING IN METAL

CONDUIT

* Surface wiring of 2 x 2.5mm2 PVC

sheathed cables and 2.5mm2 PVC earth

cable in 20mm diameter galvanised

steel conduit including surface

mounted metal clad plate switch with

mounting box but excluding batten

lampholder, ceiling rose, fitting, fan

regulator and fan *(008 014)


1-gang switch (conduit run not exceeding

8m)


1-gang switch (conduit run exceeding 8m

but not exceeding 12m)

A 010 NA Two lighting or fan points controlled by a No. 64.60 E A 10

2-gang switch (conduit run not exceeding

12m)

EM's CODE

ID : KMC/iy/ElecWorks (FY2012).xls (1) (21.10.2011) (May/147-3)

SOR Page 2

SECTION CODE PICTURE DESCRIPTION UNIT RATE ($) EM's CODE

A 011 NA Three lighting or fan points controlled No. 98.05 E A 11

by a 3-gang switch (conduit run not

exceeding 18m)

A 012 NA Each additional lighting point or fan No. 22.30 E A 12

point in one looping circuit to items

A8 to A11 (conduit run not exceeding 5m)

A 013 NA Each additional lighting or fan point No. 42.50 E A 13

in one looping circuit to items A8 to

A11 (conduit run exceeding 5m but not

exceeding 10m)

A 014 NA One lighting or fan point controlled by No. 71.45 E A 14

two 2-way switch (conduit run not

exceeding 12m)

LIGHTING/FAN POINTS WIRING IN PVC

CONDUIT

* Surface wiring of 2 x 2.5mm2 PVC

sheathed cables and 2.5mm2 PVC earth

cable in 20mm diameter PVC conduit

including surface mounted metal clad plate

switch with mounting box but excluding

batten lampholder,ceiling rose, fitting, fan

regulator and fan *(015 021)

A 015 NA One lighting or fan point controlled No. 25.40 E A 15


exceeding 8m)

A 016 NA One lighting or fan point controlled No. 32.70 E A 16

by a 1-gang switch (conduit run exceeding

8m but not exceeding 12m)

A 017 NA Two lighting or fan points controlled by No. 40.50 E A 17

a 2-gang switch (conduit run not exceeding

12m)

A 018 NA Three lighting or fan points controlled No. 63.30 E A 18


exceeding 18m)

A 019 NA Each additional lighting point in one No. 9.50 E A 19

looping circuit to items 015 to 018

(conduit run not exceeding 5m)


one looping circuit to items 015 to

018 (conduit run exceeding 5m but not

exceeding 10m)

A 021 NA One lighting or fan point controlled by No. 52.70 E A 21

two 2-way switch (conduit run not

exceeding 12m)


SOR Page 3


PUBLIC LIGHTING POINT'S WIRING IN

PVC TRUNKING

Items 022 to 027 are for the

installation of new public lighting points.

The application of any combination of

items 022 to 027 in a single works order

shall not exceed a total of 30 nos.

per building block. Lighting point

exceeding 30 nos. per building block shall

be built-up from other sections of this

Schedule of Rates

* Surface wiring for one public lighting

point comprising 3 x 2.5mm2 PVC

attached cables in PVC trunking of the

following trunking run (ceiling rose,

mounting block and wiring in pipe conduit

to be measured separately) *(022 027)

A 022 NA Not exceeding 10m per point (applicable No. 21.55 E A 22

for not more than 5 nos. of lighting point

per block)


for between 6 to 10 nos. of lighting point

per block)


for between 11 to 30 nos. of lighting point

per block)

A 025 NA Exceeding 10m but not exceeding 16m No. 34.00 E A 25

per point (applicable for not more than 5

nos. of lighting point per block)


per point (applicable for between 6 to

10 nos. of lighting point per block)


per point (applicable for between 11 to

30 nos. of lighting point per block)

B. RISING MAIN, SUBMAIN, CIRCUIT

WIRING AND CABLE

RISING MAIN

* Rising main of 600/1000 volts PVC/PVC

sheathed cable of the following size

(metal trunking/tray to be measured

separately) :- *(001 009)

B 001 NA 4 x 150 mm2 with 70mm2 PVC sheathed m 88.90 E B 1

earth cable


earth cable


earth cable


SOR Page 4



earth cable


earth cable


earth cable


earth cable


earth cable


earth cable

SUBMAIN/CIRCUIT WIRING

* Submain/circuit wiring of 600/1000 volts

PVC/PVC sheathed cable of the following

size (PVC trunking/conduit to be

measured separately) :- *(010 014)


earth cable


earth cable


earth cable


earth cable


earth cable

CIRCUIT WIRING

* Circuit wiring/wiring of 600/1000 volts

PVC/PVC sheathed cable of the following

size (PVC trunking/conduit to be

measured separately) *(015 016)

B 015 NA 2 x 2.5 mm2 with 2.5mm2 PVC sheathed m 2.60 E B 15

earth cable


earth cable


SOR Page 5


* Circuit wiring/wiring of 600/1000 volts

PVC sheathed cable of the following size

(PVC trunking/conduit to be measured

separately) *(017 019)


earth cable


earth cable


earth cable

EARTH WIRING

* Single PVC sheathed green & yellow

colour earth wire of the following

size:- *(020 027)

B 020 NA 2.5 mm2 to 4mm2 m 1.30 E B 20

B 021 NA 6 mm2 m 1.60 E B 21

B 022 NA 10 mm2 m 2.10 E B 22

B 023 NA 16 mm2 m 2.90 E B 23

B 024 NA 25 mm2 m 4.20 E B 24

B 025 NA 35 mm2 m 5.00 E B 25

B 026 NA 50 mm2 m 6.60 E B 26

B 027 NA 70 mm2 m 8.10 E B 27

FIRE RESISTANT CABLE

(S'pore Cable Manufacturer, Fujikuca,

Enamelled Wire & Cable, Sigma, Tai Sin,

Nexan)

* 600/1000 volts PE or EPR fire resistant

wiring/cable with PVC sheath of the

following size (cables trunking/tray to be


B 028 NA 2 x 2.5mm2 m 6.80 E B 28

B 029 NA 4 x 16 mm2 m 20.00 E B 29

B 030 NA 4 x 25 mm2 m 24.00 E B 30

UNDERGROUND CABLE

(S'pore Cable Manufacturer, Sigma,

Enamelled Wire & Cable, Tai Sin, Wilson)

* 600/1000 Volts PVC/SWA/PVC

underground cable of the following size

including laying in trench but excluding

excavation:- *(031 044)

B 031 NA 4mm2 3-core m 4.00 E B 31

B 032 NA 6mm2 2-core m 4.80 E B 32


SOR Page 6


B 033 NA 6mm2 3-core m 5.90 E B 33

B 034 NA 10mm2 2-core m 7.40 E B 34

B 035 NA 10mm2 3-core m 8.40 E B 35

B 036 NA 16mm2 2-core m 9.00 E B 36

B 037 NA 25mm2 2-core m 10.10 E B 37

B 038 NA 50mm2 2-core m 15.70 E B 38

B 039 NA 6mm2 4-core m 6.80 E B 39

B 040 NA 10mm2 4-core m 9.00 E B 40

B 041 NA 16mm2 4-core m 22.80 E B 41

B 042 NA 25mm2 4-core m 28.80 E B 42

B 043 NA 35mm2 4-core m 32.80 E B 43

B 044 NA 50mm2 4-core m 37.80 E B 44

SURFACE WIRING IN GALVANISED

STEEL CONDUIT/METAL TRUNKING

* PVC/PVC sheathed interconnecting

cable including bracket terminations, lugs

and conduit/metal trunking etc. of the

following size (between main switchboard

and lighting distribution board) *(045 051)

B 045 NA 2 x 6 mm2 with 6mm2 PVC earth cable m 10.40 E B 45

B 046 NA 2 x 10 mm2 with 10mm2 PVC earth m 11.05 E B 46

cable


cable


cable


cable

B 050 NA 4 x 10 mm2 with 10mm2 PVC earth cable m 12.90 E B 50


cable

UNDERGROUND CABLE JOINT

B 052 NA Underground straight cable joint for No 40.85 E B 52

2 x 6/10/16 mm2 or for 4 x 6/10/16 mm2

PVC/SWA/PVC cables

B 053 NA Underground straight cable joint for No 57.80 E B 53

2 x 25/50 mm2 or for 4 x 25/50 mm2

PVC/SWA/PVC cables

B 054 NA Underground Tee-joint for 2 core x 6mm2 No 52.40 E B 54

to 2 core x 25mm2 PVC/SWA/PVC cables


SOR Page 7


FLEXIBLE CABLE

B 055 NA 3 core 1.5mm2 PVC/PVC flexible cable m 1.50 E B 55

B 056 NA 3 core 2.5mm2 PVC/PVC flexible cable m 2.10 E B 56

BUS BAR

B 057 NA Tinned copper busbar including fixing kg 18.40 E B 57

accessories and connection

C. CABLE GLAND & LUG

CABLE GLAND

* Brass compression gland (Type BW)

including brass locknut, earth tag,

shroud, connection to cable and mounting

bracket for the following cable :- *(001 010)

C 001 NA 6mm2 2 or 3 core PVC/SWA/PVC No 9.40 E C 1





C 006 NA 6mm2 4 core PVC/SWA/PVC No 10.20 E C 6





CABLE LUG

* Supply and fix cable lug of the following

size *(011 020)

C 011 NA 4mm2, 6mm2 or 10mm2 No. 1.30 E C 11

C 012 NA 16mm2 or 25mm2 No. 1.50 E C 12

C 013 NA 35mm2 No. 1.80 E C 13

C 014 NA 50mm2 No. 2.40 E C 14

C 015 NA 70mm2 No. 2.70 E C 15

C 016 NA 95mm2 No. 3.00 E C 16

C 017 NA 120mm2 No. 3.60 E C 17

C 018 NA 150mm2 No. 4.20 E C 18

C 019 NA 185mm2 No. 4.45 E C 19

C 020 NA 240mm2 No. 6.60 E C 20


SOR Page 8


CABLE LINK

Cable link shall only be used in cases

where the existing cables are damaged

due to fire, theft or vandalism and need

urgent replacement or when the length

of cable required for the work is more

than the maximum length available

in the market. Prior approval of the

Superintending Officer shall be obtain

if the links are to be used in situations

other than those described above

* Supply and fix cable link of the

following sizes : *(021 033)

C 021 NA 1.5mm2 and 2.5mm2 No. 0.25 E C 21

C 022 NA 4mm2 and 6mm2 No. 0.50 E C 22

C 023 NA 10mm2 No. 0.70 E C 23

C 024 NA 16mm2 No. 0.90 E C 24

C 025 NA 25mm2 No. 1.30 E C 25

C 026 NA 35mm2 No. 1.60 E C 26

C 027 NA 50mm2 No. 2.10 E C 27

C 028 NA 70mm2 No. 2.60 E C 28

C 029 NA 95mm2 No. 2.80 E C 29

C 030 NA 120mm2 No. 3.30 E C 30

C 031 NA 150mm2 No. 3.70 E C 31

C 032 NA 185mm2 No. 4.20 E C 32

C 033 NA 240mm2 No. 5.10 E C 33

EARTH WIRE TAP

C 034 NA 25mm2/35mm2 earth wire tap No. 1.80 E C 34

C 035 NA 50mm2/70mm2 earth wire tap No. 2.80 E C 35

D. CONDUIT, TRUNKING & CABLE

TRAY

CONDUIT

(Barton, Maruchi, Walsall, Burns)

* Galvanised steel conduit of the following

diameter fixed to wall, or ceiling

complete with spacer bar, saddle,

inspection box/junction/bend/tee,

elbow and joint accessories *(001 003)

D 001 NA 20mm m 3.40 E D 1

D 002 NA 25mm m 4.00 E D 2

D 003 NA 32mm m 5.90 E D 3


SOR Page 9


* Super high impact heavy gauge PVC

conduit of the following diameter fixed to

wall or ceiling complete with

spacer bar, saddle, inspection box,

junction/bend/tee, elbow and joint

accessories *(004 007)

D 004 NA 20mm m 1.50 E D 4

D 005 NA 25mm m 1.70 E D 5

D 006 NA 32mm m 2.40 E D 6

D 007 NA 38mm m 4.80 E D 7

PVC TRUNKING

(Waller, Litaflex, Chung Shan)

* Approved PVC trunking of the following

size *(008 013)

D 008 NA 25mm x 12.5mm single compartment m 1.80 E D 8

D 009 NA 32mm x 16mm single compartment m 1.90 E D 9

D 010 NA 40mm x 20mm single compartment m 2.10 E D 10

D 011 NA 60mm x 20mm two compartments m 3.00 E D 11

D 012 NA 80mm x 32mm two compartments m 4.80 E D 12

D 013 NA 100mm x 40mm three compartments m 8.00 E D 13

METAL TRUNKING

(Ekko, Sakiya, Li-Soon, Ega, EM

Industries)

* Electrogalvanised metal trunking finished

in epoxy paint complete with coupling,

detachable cover, screws and joint

accessories including fixing to walls

or ceilings of the following size :- *(014 034)

D 014 NA 1.2mm thick 50mm x 50 mm m 8.50 E D 14










SOR Page 10














METAL TRUNKING COVER

* Electro galvanised steel detachable

trunking cover finished with epoxy coating

and fixed to existing trunking of the

following size:- *(035 042)

D 035 NA 1.2mm thick, 50 x 25mm or 50 x 50mm m 3.40 E D 35

D 036 NA 1.2mm thick, 75 x 50mm or 75 x 75mm m 3.90 E D 36

D 037 NA 1.2mm thick, 100 x 25mm to 100mm m 4.55 E D 37

D 038 NA 1.2mm thick, 125 x 50mm m 5.35 E D 38

D 039 NA 1.2mm thick, 150 x 25mm to 150mm m 6.10 E D 39




CABLE TRAY

* Hot dipped galvanised perforated mild

steel cable tray of the following size

including hanger, support and

fixing *(043 047)

D 043 NA 150mm width, 1.0mm thick m 14.00 E D 43






SOR Page 11


CONDUIT PIPE FOR ROAD CROSSING

* UPVC class "C" pipe of the following

diameter for road crossing laid in trench

(trench measured separately) *(048 051)

D 048 NA 50mm m 1.70 E D 48

D 049 NA 80mm m 2.90 E D 49

D 050 NA 100mm m 4.50 E D 50

D 051 NA 150mm m 7.20 E D 51

PVC FLEXIBLE CONDUIT

* PVC flexible conduit of the following

diameter *(052 054)

D 052 NA 20mm m 2.20 E D 52

D 053 NA 25mm m 2.80 E D 53

D 054 NA 32mm m 3.70 E D 54

E. SWITCH, SOCKET OUTLET AND

CONSUMER UNIT

SWITCH

E 001 NA PVC mounting box for switch or socket No. 0.95 E E 1

outlet (1 gang or 2 gang)

E 002 NA Metal mounting box for switch or socket No. 1.45 E E 2

outlet (1 gang or 2 gang)

* 5 to 10 Amp white rocker plate switch

for the following :-

(MK, Delta, Crabtree, Tenby, Clipsal,

Hager) *(003 006)

E 003 NA 1-way or 2-way switch No. 5.40 E E 3

E 004 NA 2 gang switch No. 6.70 E E 4



E 007 NA 5 to 10 Amp metal clad switch 1 gang No. 10.30 E E 7

(MK, Delta, Clipsal, PDL, Hager)

E 008 NA 5 to 10 Amp metal clad switch 2 gang No. 13.20 E E 8

or 4 gang (MK, Delta, Clipsal, PDL, Hager)

E 009 NA 20 Amp DP water heater switch with pilot No. 15.50 E E 9

lamp

E 010 NA 20 Amp DP switch No. 12.80 E E 10

E 011 NA 5 - 10 Amp weatherproof (IP66) No. 58.00 E E 40

I-gang switch


SOR Page 12


ISOLATOR

* Metal Clad and/or weatherproof Isolator

Switch of the following rating :

(MEM, SMB, S-Team, Clipsil, ABB and

Hager) *(012 015)

E 012 NA 20 to 40 Amp DP No. 64.00 E E 11

E 013 NA 63 Amp DP No. 80.00 E E 12

E 014 NA 20 to 40 Amp TPN No. 73.30 E E 13

E 015 NA 63 to 100 Amp TPN No. 145.20 E E 14

E 016 NA 20 Amp to 63 Amp DP non-weather proof No. 60.00 E E 15

and non-metal clad isolator switch

E 017 NA 125A 4Pole Auto Transfer Switch, No. 1,955.00 E E 39

Socomec, S-Team or other approved c/w

control wire at existing MSB

SOCKET OUTLET

* Switch socket-outlet of the following

type : (MK, Tenby, Delta, Crabtree,

Clipsal) *(018 025)

E 018 NA 13 Amp No. 6.50 E E 16

E 019 NA 13 Amp, 2 gang No. 12.30 E E 17

E 020 NA 13 Amp metal clad No. 8.90 E E 18

E 021 NA 13 Amp metal clad, 2 gang No. 15.60 E E 19

E 022 NA 13 Amp weatherproof No. 75.00 E E 20

E 023 NA 15 Amp weatherproof No. 86.00 E E 21

E 024 NA 15 Amp No. 11.50 E E 22

E 025 NA 15 Amp, metal clad No. 12.20 E E 23

FUSED PLUG

E 026 NA 13 Amp 3 pin plug No. 4.30 E E 24

E 027 NA 15 Amp 3 pin plug No. 7.20 E E 25

E 028 NA 15 Amp 3 pin weatherproof plug No. 33.95 E E 26

CONSUMER CONTROL UNIT

* Insulated consumer control unit complete

with 40 or 63 Amp RCCB (30 to 100 mA),

32 Amp DP or 63 Amp DP isolator

including:- (ABB, Mem, Sunlight, SMB,

Syntech, S-Team) *(029 033)


SOR Page 13


E 029 NA 4 x 5 to 20Amp 6KA MCB No. 140.90 E E 27





* Metal clad consumer control unit

complete with 40 or 63Amp RCCB

(30 to 100 mA), 32 Amp DP or 63 Amp

DP isolator including :-

(ABB, Mem, Sunlight, F & G, SMB, Syntech,

S-Team) *(034 038)






E 039 NA Metal clad split load consumer unit with No. 166.20 E E 37

32 or 63A Amp DP isolator, 2 x 20A SP

MCB, with 40 or 63Amp DP RCCB (30 to

100 mA) and 6 x 5/20 Amp 6KA SP

MCB (ABB Mem, Sunlight, SMB,

S-Team)

E 040 NA Metal clad split-load consumer No. 232.80 E E 38

control unit with 32 or 60 Amp DP isolator,

3 x 20A sp MCB, 40 or 63 Amp DP RCCB

(30 to 100 mA) and 7 x 5/20A 6KA SP

MCB (ABB, Mem, Sunlight, SMB, Syntech,

S-Team)

F. CONNECTOR, CUT-OUT, FUSE,

TAP-OFF UNIT AND CIRCUIT BREAKER

B.I. CONNECTOR

* B.I. Connector of the following circuit

rating :- (Lucy, Quintela or other

approved) *(001 005)

F 001 NA 30 Amp to 40 Amp No. 5.80 E F 1

F 002 NA 60 Amp No. 6.80 E F 2

F 003 NA 100 Amp (1 in 1 out to 1 in 4 out) No. 13.60 E F 3




SOR Page 14


LINE TAP

* Line tap with hexagon screws and felt

of the following size :- *(006 010)

F 006 NA 18 mm2 No. 6.90 E F 6

F 007 NA 30 mm2 No. 8.65 E F 7

F 008 NA 50 mm2 No. 14.55 E F 8

F 009 NA 75 mm2 No. 20.85 E F 9

F 010 NA 90 to 120 mm2 No. 43.65 E F 10

FUSE LINK

* HRC cartridge fuse link only of the

following current rating :-

(MEM, English Electric, Legrand) *(011 015)

F 011 NA 5 to 15 Amp No. 2.40 E F 11

F 012 NA 16 to 24 Amp No. 2.80 E F 12

F 013 NA 25 to 40 Amp No. 3.20 E F 13

F 014 NA 60 Amp / 63 Amp No. 6.00 E F 14

F 015 NA 100 Amp No. 12.10 E F 15

* HRC cartridge fuse link of the following

current rating with carrier and base

(MEM, English, Electra,

Legrand) *(016 020)

F 016 NA 5 to 15 Amp No. 9.70 E F 16

F 017 NA 16 to 24 Amp No. 10.55 E F 17

F 018 NA 25 to 40 Amp No. 11.20 E F 18

F 019 NA 60 Amp / 63 Amp No. 18.60 E F 19

F 020 NA 100 Amp No. 25.30 E F 20

* Bolted type HRC fuse link of the

following current rating :-

(MEM, English Electric,

Legrand) *(021 027)

F 021 NA 20 to 40 Amp No. 3.40 E F 21

F 022 NA 63 Amp No. 5.80 E F 22

F 023 NA 100 Amp No. 11.95 E F 23

F 024 NA 160 Amp No. 14.15 E F 24


SOR Page 15


F 025 NA 200 Amp No. 15.50 E F 25

F 026 NA 300 Amp No. 22.30 E F 26

F 027 NA 400 Amp to 600 Amp No. 49.95 E F 27

TAP-OFF UNIT

(ABB, Sunlight, SMB, S-Team, syntech)

F 028 Single phase tap-off box with 60 Amp to No. 220.00 E F 28

80 Amp 25 KA 240V DP MCCB, 2 x

95mm2 line-tap connectors, BI connector,

earth connector and earthing terminal

F 029 Single phase tap-off box with 2 x 60 Amp No. 280.00 E F 29

25KA 240V DP MCCB, 2 x 95mm2 line-

tap connectors, BI connectors, earth

connectors and earthing terminal

F 030 NA Three phase fused tap-off box with 4 x No. 339.50 E F 30

95 mm2 line-tap connectors, BI connectors

25KA 150 Amp TP MCCB and earth link

F 031 Three phase fused tap-off box with 4 x No. 310.40 E F 31

95 mm2 line tap connectors, BI connectors

25KA 60A or 100A TP MCCB and earth link

F 032 NA Three phase 60 Amp to 100 Amp unfused No. 131.00 E F 32

tap-off unit with 50 mm2 line-tap

connector, neutral connector and earth link

MINIATURE CIRCUIT BREAKER (MCB)

F 033 NA Mounting box for RCCB or MCB No. 9.70 E F 33

* MCB type B or C with short circuit of the

following rating (ABB, Merlin Gerin,

Mitsubishi, Hager, GEWISS) *(034 037)

F 034 NA Minimum 6 KA or 10 KA interrupting No. 16.60 E F 34

capacity 6 - 40 Amp SP 240V

F 035 NA Minimum 10 KA interrupting capacity No. 55.65 E F 35

50 - 63 Amp DP 240V

F 036 NA Minimum 10 KA interrupting capacity No. 62.30 E F 36

10 - 63 Amp TP 400V

F 037 NA Minimum 6KA or 10KA interrupting No. 27.15 E F 37

capacity 6 - 40 Amp DP 240V

MOULDED CASE CIRCUIT BREAKER

(MCCB)

* MCCB of the following rating (Hitachi,

ABB Merlin Gerin, Terasaki,

Mitsubishi) *(038 044)

F 038 NA Minimum 25 KA short circuit interrupting No. 150.00 E F 38

capacity, 15 - 100 Amp 240V DP


SOR Page 16


F 039 NA Minimum 25 KA short circuit interrupting No. 211.00 E F 39

capacity, 15 - 100 Amp 415V TP

F 040 NA Minimum 36 - 50 KA short circuit No. 351.30 E F 40

interrupting capacity, 125 - 225 Amp

415V TP

F 041 NA Minimum 36 - 50 KA short circuit No. 515.40 E F 41

interrupting capacity, 250 - 400Amp

415V TP

F 042 NA 50 KA short-circuit interrupting No. 974.70 E F 42

capacity 450 - 600Amp 415V TP

F 043 NA 50 KA short-circuit interrupting No. 1,681.10 E F 43


F 044 NA 50 KA short-circuit interrupting No. 1,800.00 E F 44


AIR CIRCUIT BREAKER (ACB)

F 045 NA Remove existing ACB including No. 53.35 E F 45

reinstatement and disposal off site (New

ACB to be measured separately)

* ACB with overload and short circuit

protection control unit, drawout type of

the following rating including necessary

connecting wirings (Removal of existing

ACB to be measured


F 046 NA Minimum 50 KA 3 capacity 1000A to No. 4,607.00 E F 46

1600A 415V TP

F 047 NA Minimum 50 KA 3 capacity above 1600A No. 7,459.00 E F 47

up to 3200A 415V TP

RESIDUE CURRENT CIRCUIT BREAKER

* Residue Current Circuit Breaker (RCCB)

with built-in anti-nuisance tripping

device and trip indication of the

following rating (MG, Hager, F & G,

ABB) *(048 050)

F 048 NA 40A 2P 30mA to 300mA No. 47.00 E F 48

F 049 NA 63A 2P 30mA to 300mA No. 68.10 E F 49

F 050 NA 40A or 63A 4P 30mA to 300mA No. 118.70 E F 50

STREET LIGHTING CUT-OUT

F 051 NA Street lighting cut-outs 25 Amps, 240 No 34.90 E F 51

Volts (1 or 2 tag type)


SOR Page 17


F 052 NA `BICC' Cat No. G72522-03 or other No 33.45 E F 52

approved cable with glandplate and

wormdrive clips for attaching to street

lighting cutout

F 053 NA `BICC' Cat No. G72569-02 or other No 37.35 E F 53

approved 3 phase adaptor with bottom

plate for attaching to street lighting cutout

G. SWITCHBOARD, DISTRIBUTION

BOARD AND SWITCHROOM

ACCESSORIES

METER

G 001 NA Ammeter - current transformer operated No. 21.50 E G 1

(0 to 100A or up to 1600A)

(Bilt, Nitech, Rudolf)

G 002 NA Voltmeter - rotary wafer type (0 to 500V) No. 22.90 E G 2

(Celsa, Crompton, Rudolf)

G 003 NA Voltmeter & ammeter selector switch No. 16.60 E G 3

(K & N, Blueline, Selko, Telux)

G 004 NA Maximum demand ammeter (0 to 100A No. 94.50 E G 4

or up to 1600A, excluding current

transformers) (Celsa, Crompton)

INDICATOR BULB

G 005 NA Indicator bulb with built-in No. 10.60 E G 5

transformer (Ideelzumi or other approved)

G 006 NA LED indicator bulb (LED) with built-in No. 27.15 E G 6

transformer

G 007 NA 6V, 3W indicator bulb for main No. 1.95 E G 7

switchboard (Ozon, Splendour, Sylvania)

G 008 NA 6V, LED indicator bulb for main No. 13.60 E G 8

switchboard (Ideelzumi or other approved)

RELAY

G 009 NA Earth fault relay with built-in timer No. 186.80 E G 9

(excluding injection test on site

and current transformer) (Kasuga, Rudolf

or other approved)

G 010 NA Earth leakage Relay (ELR) with sensitivity No. 160.00 E G 10

adjustment of 0.03A to 20A, time delay

0.0 to 0.5 second without current

transformer

G 011 NA Earth leakage relay (ELR) with sensitivity No. 240.00 E G 11

adjustment of 0.03A to 20A, time delay

0.0 to 0.5 sec complete with

current transformer

G 012 NA DTL over current relay with built-in timer No. 324.80 E G 12

(excluding injection test on site and

current transformer) (Kasuga, Rudolf,

Mun Hean, Socomec or other approved)


SOR Page 18


G 013 NA IDMTL digital overcurrent relay No. 1,500.00 E G 13

including panel and wiring modification

(excluding injection test on site and

current tranformer) (Rudolf, Kasuga,

Mun Hean, Socomec or other approved)

TRANSFORMER

* Protective Transformer Class 5P10

(Nitech, Bilt, Rudolf) *(014 020)

G 014 NA CT Ratio 100/5 No. 48.50 E G 14

G 015 NA CT Ratio 200/5 to 300/5 No. 63.90 E G 15

G 016 NA CT Ratio 400/5 No. 66.15 E G 16



G 019 NA CT Ratio 1600/5 No. 82.85 E G 19

G 020 NA CT for earth Leakage Relay No. 80.00 E G 20

* Metering current transformer Class 1

(Nitech, Bilt, Rudolf) *(021 025)

G 021 NA CT Ratio 100/5 No. 25.30 E G 21




G 025 NA CT Ratio 1600/5 No. 37.80 E G 25

CONTACTOR

* Contactor of the following ratings :-

(Blueline, Hitachi, Mistsubishi, Hager,

Stromberg) *(026 029)

G 026 NA 20 to 40 Amp DP No. 58.50 E G 26

G 027 NA 20 to 40 Amp 4P No. 67.70 E G 27

G 028 NA 63 Amp DP No. 116.40 E G 28

G 029 NA 60 Amp 4P No. 145.50 E G 29

NEUTRAL LINK

* Supply and fix Neural link of the

following rating:- *(030 032)

G 030 NA 30A to 60A No. 10.65 E G 30

G 031 NA 100A to 200A No. 14.15 E G 31

G 032 NA 250A to 800A No. 36.85 E G 32


SOR Page 19


DISTRIBUTION BOARD / METERBOX

G 033 Indoor Service Electrical Distribution Set 1,400.00 E G 33

Panels (OG Box) complete with :

4 Nos. 630A Strip Fuse Way

6 Nos. 630A Solid Link

3 Nos. 200A HRC Fuse Link

2 Nos. Cast Resin Insulator

3 Nos. 70mm2 Earth braid with lugs

3 Nos. 70mm2 cable clip

1 No. 1720mm x 610mm x 350mm Metal

Enclosure with Panel Lock (Sunlight,

SMB, S-team, Spanners)

G 034 Lighting distribution board with metal Set 560.00 E G 34

enlosure complete with :-

1 no. LTA's approved Omron 'Zen' or

Siemen "LOGO" 4-output digital time

switch 4 no. 1 to 20 Amp MCB (6 to

10KA) 1 no. 30A DP MCCB (25KA) and

1 no. 100MA to 300MA 40A DP RCCB

1 no. 30A TP Contactor

1 no. 30/60A DP`by-pass' switch and all

internal wiring and connection

(ABB, Sunlight, SMB, S-Team, Syntech)

G 035 Electrical meter box complete with :- No. 220.00 E G 35

1 No. 32A/40A DP MCB type C 10KA

1 No. 32A/40A DP MCB type B 10 KA

2 Nos. 3 way connector

1 set 2 x 10mm2 PVC cable

1 No. insulated enclosure (IP40)

with UV stabilised and water tight

viewing lens (ABB, Sunlight, SMB, Syntech

S-team)

G 036 NA Replace cover for electrical meter box No. 70.00 E G 36

with UV stabilised and water tight viewing

lens including dismantling, modify the lock to

suit the existing. Complete with colour

labelling for the unit no. and disposal of the

old cover

G 037 NA Provide 2 Nos. BI connectors at the No. 45.00

meterboard c/w site modification to suit the

existing

G 038 NA 2mm thick transparent fibre board to m2 213.40 E G 37

main switch board/distribution board with

laminated surface on one side complete

with necessary label and cutting of slot

and opening for electrical devices

TIMESWITCH

G 039 NA Electromechanical time switch with No. 80.00 E G 38

miniumum 72 to 150 hours battery reserve

(Hager, Horstmann, Legrand, Theben)

G 040 NA Digital time switch with 24 hours or No. 116.00 E G 39

7 days programming (Hager, Legrand,

Theben, Merlin Gerlin, ABB)


SOR Page 20


G 041 NA 32A to 63A By-pass switch DP or TP No. 48.50 E G 40

(Blueline, Hitachi, Mitsubishi, Stromberg)

G 042 LTA's approved 4-output digital time No. 156.00 E G 41

switch (Omron 'Zen-10C' or Siemen

"LOGO")

PHOTO SENSOR/PHOTO CUM MOTION

SENSOR

G 043 NA Legrand 91686 photo cum motion sensor No. 350.00

c/w adjustable switch between 0.5 and 2000 lux, supplied with cable gland and fixing

bracket, IP55

G 044 NA PDL 360SP indoor PIR sensor for recessed No. 250.00

or suface mount

G 045 NA PDL WDL10 sunset switch c/w adjustable No. 350.00

20 to 100 Lux, IP56

TIMBER TEAK BOARD

G 046 NA 25mm thick timber teak board including m2 130.00 E G 42

mounting to wall and fixing screws and

finished with 3 coats of varnish

EARTH TERMINAL

G 047 NA 2 way earth terminal No 1.65 E G 43



SAFETY RUBBER MAT

G 050 NA 6.5mm thick safety rubber mat laid on m2 38.00 E G 46

floor of switchroom

JUMPER CABLE

* PVC/PVC jumper cable of the following

size between main switchboard and

underground cable's termination *(051 055)

G 051 NA 2 x 6mm2 with 6mm2 PVC Earth Cable m 4.45 E G 47





H. INDOOR LUMINAIRE/LIGHT FITTING

REMOVAL OF EXISTING LUMINAIRE

H 001 NA Remove existing ceiling, column or wall No. 5.00 E H 1

mounted luminaire including reinstatement

and disposal off site (New luminaire to be

measured separately)


SOR Page 21


MOUNTING CHANNEL FLUORESCENT

LUMINAIRE

(Removal of existing luminaire to be

measured seperately)

* The following mounting channel

fluorescent luminaire in powder coated

finish complete with low-loss ballast

(max 6.5W loss), capacitor

and warmwhite or daylight tube

(Davis, Simlite, Philips, Eurotec) *(002 016)

H 002 NA 1 x 18W or 1 x 36W No. 18.20 E H 2

H 003 NA 1 x 18W or 1 x 36W with EMA approved No. 35.45 E H 3

electronic ballast (Osram, Vossloh

Schwabe, Tridonic-Atco, Philips, Helvar)

in-lieu of low loss ballast and capacitor

H 004 NA 2 x 18W No. 30.00 E H 4

H 005 NA 2 x 36W No. 33.10 E H 5

H 006 NA 1 x 18W with clear acrylic prismatic No. 26.00 E H 6

diffuser


diffuser


diffuser


diffuser

H 010 NA 1 x 18W with metal reflector No. 26.50 E H 10



H 013 NA 1 x 18W or 1 x 36W with wire guard No. 34.90 E H 13

H 014 NA 1 x 18W or 1 x 36W with internal metal No. 29.70 E H 14

reflector, clear acrylic prismatic diffuser

and ABS end cap

H 015 NA 1 x 18W with internal metal reflector, No. 42.00 E H 15

clear acrylic prismatic diffuser, ABS

end cap and approved electronic

ballast (Osram, Vossloh Schwabe,

Triolonic Atco, Philips, Helvar) in-lieu of the

low lost ballast)

H 016 NA 1 x 36W with internal metal reflector, No. 46.00 E H 16

clear acrylic prismatic diffuser, ABS

end cap and approved electronic

ballast (Osram, Vossloh Schwabe,

Triolonic Atco, Ultro, Helvar) in-lieu of the

low lost ballast


SOR Page 22


* The following surface mounted

fluorescent luminaire with diffuser, low

loss ballast, warm white or day light tube

(ITT-Reiss, Siemens 5LG225, Disalens

602, Thorlux Jubilee, Thorn Diffuserpack,

Philips GBS314/TCS114) *(017 020)

H 017 NA 1 x 18W No. 40.00 E H 17

H 018 NA 2 x 18W No. 58.00 E H 18

H 019 NA 1 x 36W No. 45.00 E H 19

H 020 NA 2 x 36W No. 70.00 E H 20

WEATHERPROOF FLUORESCENT

LIGHT



* The following weatherproof IP65

fluorescent luminaire with low-loss ballast

(max 6.5W loss), capacitor, polycarbonate

diffuser, warmwhite or daylight tube and

plastic or stainless steel clip for the

following :-

(Thorlux, Simlite, Philips, Woolite,

Eurolite) *(021 023)

H 021 NA 1 x 18W No. 51.40 E H 21

H 022 NA 1 x 36W No. 60.30 E H 22

H 023 NA 2 x 36W No. 89.30 E H 23

* The following weatherproof fluorescent

fitting IP65, with low-loss ballast (max

6.5W loss), warm white or daylight tube

(Thorn LUES, ITT-Reiss, Disano Hydro

971) *(024 027)

H 024 1 x 18W No. 90.00 E H 24

H 025 NA 2 x 18W No. 120.00 E H 25

H 026 NA 1 x 36W No. 110.00 E H 26

H 027 NA 2 x 36W No. 135.00 E H 27


SOR Page 23


RECESSED LIGHT


measured sperately)

* Recessed T-bar mounted hinged frame

fluorescent fitting with K12 / K15

prismatics diffuser or glossy mirror louvre

matt ripped cross blade, double parabolic

glossy mirror louvre, with low-lost ballast

(max 6.5W loss), capacitor and

warmwhite/daylight tube

(Simlite, Trimex, Davis, Woolite) *(028 036)

H 028 NA 1 x 36W (300mm x 1200mm) No. 83.20 E H 28

H 029 NA 2 x 36W (300mm x 1200mm) No. 94.20 E H 29

H 030 NA 2 x 18W (300mm x 600mm) No. 79.50 E H 30

H 031 NA 2 x 18W (600mm x 600mm) No. 82.50 E H 31

H 032 NA 3 x 18W (600mm x 600mm) No. 99.50 E H 32

H 033 NA 4 x 18W (600mm x 600mm) No. 115.20 E H 33

H 034 NA 2 x 36W (600mm x 1200mm) No. 118.50 E H 34

H 035 NA 3 x 36W (600mm x 1200mm) No. 137.20 E H 35

H 036 NA 4 x 36W (600mm x 1200mm) No. 158.80 E H 36

H 037 "THORLUX" RADIANCE 2 x 36W Cat 1 No. 380.00 E H 37

recessed mounted fluorescent luminaire

H 038 "THORLUX" RADIANCE 4 x 18W Cat 1 No. 390.00 E H 38

recessed mounted fluorescent luminaire

H 039 NA Extra over item H28 to H38 for using No. 16.00 E H 39

each no. of electronic ballast in-lieu

of low-loss ballast (Osram, Vossloh-

Schwabe, Tridonic-Atco, Helvar, Ultro or

other approved)

H 040 "ARCLUCE" ORION 240, 2990-10, No. 98.00 E H 40

recessed downlight with 4mm frosted

glass protector and 18W lamp


SOR Page 24


H 041 NA "DIL-CIKO" 17 recessed downlight ring No. 105.75 E H 41

diameter 185mm with 13W PLC lamp

H 042 NA "DUTCH-LITE" KL 7943 recessed No. 137.75 E H 42

downlight with 2 x 13W PL lamps ring

diameter 225mm & reflector

H 043 NA "EUROTEC" RAPID 214-83NO 2 x 18W No. 65.00 E H 43

PLC recessed downlight with metallized

polycarbonate reflector, fresnel lens and

polycarbonate diffuser IP44

H 044 ILLIS IL-15001D recessed downlight c/w die No. 98.00 E H 264

cast frame with aluminium reflector, diffuser

glass, 1 x PLC 18W compact fluorescent

lamp, control gear and all accessories

H 045 "ILLUMA" D80 recessed downlight with No. 140.00 E H 44

D842 fresnel lens, 50W lamp and remote

transformer

H 046 "INDALUX" IZS-A/S floodlight with 70W/ No. 480.00 E H 289

150W metal halide lamp (IP66)

H 047 Liedo OD-3712 square recessed No. 290.00 E H 290

downlight c/w integral gear &

1x18W/26W compact fluorescent lamp.

Made of quality sheet steel, stove-

enamelled in white (IP20)

H 048 "INTERLUX" SS87213 recessed downlight No. 75.00 E H 47

silver reflector and protection glass

with 2 x PLC 13W lamp


SOR Page 25


H 049 NA "MARCIO" (37226 & 00642) recessed No. 200.00 E H 48

downlight with die-cast aluminium ring,

polished aluminium reflector, sand-blasted

glass diffuser and 2 x 18W PLC lamps

H 050 "MAXRAY" MD2668-01 recessed wall No. 130.00 E H 49

washer downlight with aluminium reflector

and 18W PLC lamp

H 051 "MAXRAY" MX8282-01 recessed No. 95.00 E H 50

downlight with anti-glare white cone with

18W PLC lamp

H 052 NA Recessed round or square flush mounted/ No. 45.00 E H 51

eyeball halogen downlight in white, black

or brass finish with remote transformer

and lamp

H 053 "Thorn" CDHL218S 130mm high x 240mm No. 138.00 E H 265

diameter compact 4L 18W twin lamp

fluorescent recessd downlight c/w specular

polish silver anodised aluminium reflector &

metal body

H 054 Arcluce Mira 165 2663 1xPLC18W No. 130.00 E H 276

recessed downlight c/w die cast

aluminium body, polished aluminium

reflector, integral magnetci control gear

and PLC18W tube IP43

H 055 DELETED

H 056 Arcluce Mira 165 2668 2xPLC18W No. 160.00 E H 277

recessed downlight c/w die cast

aluminium body, polished aluminium

reflector, integral magnetci control gear

and PLC18W tube IP43

H 057 LUMENAX MAX-1S surface mounted No. 85.00 E H 286

downlight c/w anodized aluminium

reflector and integral control gear and

1 x PLC 13W / 1 x PLC 18W lamp (IP20)


SOR Page 26


H 058 LUMENAX MAX BLISS-2 recessed No. 78.00 E H 287

mounted downlight, white trim,

diamond faceted and orange peel

patterned anodized aluminium

reflector, integral control gear and

2 x PLC 13W / 2 x PLC 18W lamp

H 059 LUMENAX DEEP 11 recessed downlight No. 68.00 E H 288

c.w pressed steel ceiling trim with UV

tolerance off-white powder coated, sand

blasted aluminium reflector, integral

control gear and 1 x PLC 13W /

1 x PLC 18W lamp

H 060 "Lucent" HS6182H recessed downlight with No. 55.00 E H 312

silver aluminium frosted reflector and

1 X 18W/2 X 13W PLC lamp, ballast and

mounting accessories.

H 061 "Lucent" HS6182H SQ recessed downlight No. 55.00 E H 313

with silver aluminium frosted reflector and

1 X 18W/2 X 13W PLC lamp, ballast and

mounting accessories.

H 062 "Lucent" DL915a recessed downlight with No. 40.00 E H 314

silver aluminium reflector and 1 X 18W

PLC lamp, ballast and mounting

accessories

H 063 "Lampesia" DLL113 recessed downlight No. 45.00 E H 315

with silver aluminium reflector and 1 X 13W

PLC lamp, ballast and mounting

accessories

H 064 "Lampesia" DLL60526 recessed downlight No. 85.00 E H 316

with silver aluminium diamond reflector and

2 X 26W PLC lamp, ballast and mounting

accessories

H 065 "Lucent" HS8671 recessed downlight in No. 120.00 E H 317

cast aluminium with PMMA diffuser and

silver reflector c/w 3 X 1W high output

LED lamp with driver and safety pin,

mounting accessories

EMERGENCY / EXIT LIGHT



EXIT LIGHT

* Emergency "Exit" light, recessed, wall or

ceiling mounted including Nickel Cadmium

battery pack and PSB Batch Test Sticker

(Maxspid, PNE, Denko, Simlite,

Econlite) *(066 068)

H 066 Single or Double-sided box type with 8W No. 83.30 E H 52

fluorescent tube


SOR Page 27


H 067 NA LED Emergency "Exit" light No. 130.00 E H 53

Double-sided slim type

H 068 LED Emergency "Exit" light No. 115.00 E H 54

Single-sided slim type

EMERGENCY BULKHEAD LIGHT

* Emergency bulkhead light fitting

(weatherproof of non-weatherproof) with

2-hour nickel cadmium battery pack

(Simlite, Econlite, Maxspid, PNE,

Samcom) *(069 071)

H 069 NA 1 x 8W tube No. 101.80 E H 55

H 070 NA 2 x 8W tube No. 116.40 E H 56

H 071 NA 1 x 10W tube No. 110.00 E H 57

EMERGENCY BATTEN LIGHT

* Emergency fluorescent batten light fitting

(weatherproof or non-weatherproof)

complete with low-loss ballast and nickel

cadmium power pack module

(Simlite, Econlite, Maxspid) *(072 073)

H 072 NA 1 x 18W No. 109.90 E H 58

H 073 NA 1 x 36W No. 114.90 E H 59

SECURITY LIGHT

H 074 Recessed self contained UFO emergency No. 116.40 E H 60

lighting with 1 x 10W halogen lamp and 2

hour battery pack

(Maxspid, Simlite, Econlite, PNE)

H 075 NA "PHILIPS" FGC Security lighting including No. 129.60 E H 61

PL 9W/11W lamp

POWER PACK FOR EMERGENCY /

EXIT LIGHT

H 076 2-hour nickel cadmium power pack No. 71.80 E H 62

for 1 x 8W or 2 x 8W or 1 x 10W

emergency bulkhead/exit light


Samcom)

H 077 NA Nickel cadmium power pack for 18W to No. 92.15 E H 63

36W fluorescent fitting

H 078 NA 2-hour nickel cadmium power pack for No. 72.60 E H 64

PL/PLC lamp


SOR Page 28


H 079 NA Nickel cadmium battery 2.4v 4.5AH No. 15.00 E H 65

(2 cells) for power pack

H 080 NA Nickel cadmium battery 6v 4AH No. 37.50 E H 66

(5 cells) for power pack

H 081 NA Control gear (charger) for power pack No. 45.00 E H 67


Samcom)

H 082 NA 2-hour 5W Halogen Emergency Battery No. 75.20 E H 266

pack c/w Ni-cad battery

AIRCRAFT NAVIGATION/OBSTRUCTION

LIGHTS



H 083 "BTI" L860 Series low Intensity red LEDs No. 1,800.00 E H 68

Obstruction Light

H 084 "FABRIKANT" 8003 twin obstruction light, Set 1,164.00 E H 69

lighting control box and change over relay

with bracket and 42mm dia. hot dipped

galvanised steel pipe mounted on roof

deck and secured by 3 Nos. stainless

steel cable support

H 085 "HONEYWELL" H&P OB20 Single No. 320.00 E H 70

Obstruction Light with red lens cover

and lamp

H 086 NA "HONEYWELL" H&P OB22 Twin No. 880.00 E H 71

Obstruction Lights with change over

relay and lamps

H 087 NA "HUBBELL" navigation obstruction light No. 700.35 E H 72

cat no. BYMB-36002-AHQ with 2 x

7AP53-R, red frenel lens, transfer relay,

2 x 100W lamp and mounted on

navigation obstruction lightmast

H 088 "THORN" F21 Single Obstruction Light No. 280.00 E H 73

with red lens cover and lamp

H 089 "THORN" F22 Twin Obstruction Light with No. 780.00 E H 74

change over relay and lamps

H 090 "THORN" OBSTA STI Omni-directional No. 1,050.00 E H 75

red low intensity obstruction light with

neon discharge tube (Photometry : more

than 10cd)

H 091 "THORN" OBSTA HI-STI Omni-directional No. 1,800.00 E H 76

red low intensity obstruction light with

neon discharge tube (Photometry : more

than 32 cd)


SOR Page 29


H 092 NA "WE-EF" 308-E2-100 Twin obstruction Set 1,344.00 E H 77

light with 8000hr Claude Krypton lamps,

lighting control box, change over relay,

brackets and 42mm dia. hot dipped

galvanised steel pipe mounted on roof

deck and secured by 3 nos. stainless

steel cable support

HIGH AND LOW BAY LIGHTS



* Highbay light fitting - recessed,

suspended or ceiling mounted (Removal

of existing luminaire to be measured

seperately) (Thorn Hipak 2, Philips SDK/

HDK, Thorlux Combo, Siemens HS50,

Siteco Stylo) *(093 098)

H 093 NA 250 - 400W Mercury, Open No. 305.00 E H 78

H 094 NA 250 - 400W Mercury, Enclosed IP54 No. 380.00 E H 79

H 095 NA 250 - 400W Mercury, Prismatic No. 426.00 E H 80

H 096 NA 250 - 400W SON/MBI, Open No. 315.00 E H 81

H 097 NA 250 - 400W SON/MBI, Enclosed IP54 No. 410.00 E H 82

H 098 250 - 400W SON/MBI, Prismatic No. 438.00 E H 83

* Lowbay light fitting - recessed,

suspended or ceiling mounted (Thorn

Hipak 2, Thorlux Compact 3, Compact 65,

Siteco or other approved) *(099 102)

H 099 NA 250 - 400W Mercury, Open No. 280.00 E H 84

H 100 NA 250 - 400W Mercury, lens, louvre or wire No. 380.00 E H 85

guard

H 101 NA 250 - 400W SON/MBI, Open No. 420.00 E H 86

H 102 NA 250 - 400W SON/MBI, lens, louvre or wire No. 480.00 E H 87

guard

BRANDED LUMINAIRE



* The following luminaire including

control gear, low loss ballast, connecting

wiring, mounting bracket and other

accessories *(103 308)

H 103 NA "AEC" 2502/BK/118 wall mounted light No. 172.50 E H 267

fitting IP54 c/w PLC18W EC Ballast, G24D

PLC lamholder & etc


SOR Page 30


H 104 "AEROLITE" GAMMA 1 x 18W fluorescent No. 68.70 E H 88

luminaire with HF Electronic ballast and

daylight/warm white tube

H 105 "AEROLITE" GAMMA 1 x 36W fluorescent No. 80.20 E H 89

luminaire with HF Electronic ballast and


H 106 "ARCLUCE" MONOS ceiling mounted No. 100.90 E H 90

luminaire with 18W fluorescent tube,

body in extruded aluminium and reeded

clear high impact acrylic diffuser

H 107 "ARCLUCE" MONOS ceiling mounted No. 134.00 E H 91

luminaire with 36W fluorescent tube,

body in extruded aluminium and reeded

clear high impact acrylic diffuser

H 108 "ARCLUCE" MONOS 1021 with 36W No. 135.80 E H 92

fluorescent tube (IP40) oval-shaped

extruded aluminium subular system and

reeded prismatic diffuser

H 109 Arcluce Square 3532 1x70/50 wall No. 820.00 E H 278

mounted fitting c/w die cast aluminium

body, temper glass diffuser, extruded

aluminium control gear box with Vossloh

Schwabe Control gear

and Nav-T 70W super sodium lamp IP55

H 110 Arcluce Square 3532 1x70/50 wall No. 770.00 E H 304

mounted fitting c/w die cast aluminium

body, temper glass diffuser, extruded

aluminium control gear box with

vossloh schwabe control gear and

60W/65W spiral cool white/daylight

compact fluorescent lamp

H 111 NA "ARIES" CLASSIC MOD 683 wall No. 93.85 E H 93

mounted luminaire with 13W PLC/18W

PLC lamp, die cast aluminium body and

acrylic diffuser

H 112 NA "ARIES" CLASSIC MOD 684 wall No. 85.85 E H 94

mounted luminaire with die-cast

aluminium structure and polyester powder

coated paint and 13W/18W PLC/SC 18W

lamp

H 113 "ASTRIUM" TV210 decorative semi- No. 280.00 E H 95

recessed wall luminaire in cast aluminium

with frosted polycarbonate diffuser and

2 x 10W or 2 x 7W PLC lamps

H 114 NA "BEGA" 2489 wall mounted luminaire with No. 221.40 E H 96

13W PLC lamp and die-cast aluminium

body

H 115 NA "BEGA" 2926 recessed wall mounted No. 221.40 E H 97

luminaire with 183W PLC lamp, aluminium

alloy and stainless steel body

H 116 NA "BEGA" 2491 wall light (IP45) with 26W No. 368.00 E H 98

PLC lamp


SOR Page 31


H 117 NA "BERGNER & WEISER" art no. No. 141.10 E H 99

7151.1(W) wall/ceiling mounted luminaire

wtih die-cast aluminium body,

polycarbonate diffuser and 13W TC-D lamp

H 118 NA "BERGNER & WEISER" art no. No. 168.15 E H 100

7151.1M(W) wall/ceiling mounted

luminaire with die-cast aluminium body,

polycarbonate diffuser and 13W TC-D

lamp

H 119 "BOLUCE" ASTRA 9323, wall mounted No. 146.45 E H 101

luminaire with 2 x 9W PL lamps

H 120 "BOLUCE" GAMMA 1093, recessed wall No. 134.85 E H 102

mounted luminaire with grille and 9W PL

lamp

H 121 "COSMO" C 0380/218 cast aluminium No. 160.05 E H 103

ceiling mounted luminaire with opal

polycarbonate diffuser with 2 x PLC

18W lamps

H 122 "DAIKO" DWP 18642 updown wall light in No. 260.00 E H 104

cast aluminium with diffuser with 18W

PLC lamp

H 123 "DAIKO" DWP-18651 wall light in cast No. 295.00 E H 105

aluminium with diffuser with 13W PLC

lamp

H 124 "Lucent" 8077 surface mounted downlight in No. 450.00 E H 318

cast aluminium with frosted safety glass

diffuser and silver aluminium reflector, 2 X

18W PLC lamp and ballast

"Lucent" 8098 surface mounted downlight in No. 520.00 E H 319

H 125 cast aluminium with frosted safety glass

diffuser and silver aluminium reflector, 70W

metal halide lamp and integral control gear

H 126 NA "DEFA" NEPTUNE 003AS 121201 No. 162.90 E H 106

wall/ceiling mounted luminaire with 26W

PLC lamp and polycarbonate diffuser

H 127 NA "DAIKO" diffuser luminaire (WSLD No. 35.80 E H 107

Series) with prismatic diffuser, end caps

and 36W tube


SOR Page 32


H 128 NA "DIL" ROLLER 85 ceiling-mounted No. 220.00 E H 110

separate tubular luminaire comprising

extruded aluminium tubular body with

36W fluorescent lamp, polycarbonate

diffuser, ceiling bracket, terminal flange

and flat plug

H 129 "Ingo" Aste decorative wall light in aluminium No. 1,025.00 E H 324

with frosted tempered glass diffuser and 80W

mercury super deluxe lamp and integral control gear

H 130 NA "DISANO" Model 2100 KENDO No. 152.30 E H 111

fluorescent luminaire with 36W

fluorescent lamp and end cap

H 131 NA "DISANO" Model 2100 KENDO No. 135.80 E H 112

fluorescent luminaire with 18W

fluorescent lamp and cap

H 132 DOMKNICO NERI 1002.000+GP30 No. 285.00 E H 268

decorative pedestral luminaire in cast iron

with opal PMMA globe c/w ELN 15W

energy saving lamp and all accessories

(Grey)

H 133 NA "DUTCH-LITE" 6301 decorative wall No. 630.00 E H 113

luminaire in cast aluminium with vandal

resistant glass diffuser and 125W metal

halide mercury lamp

H 134 NA "EUROTEC" 220 561 1 x 150W metal No. 550.00 E H 114

halide down wall light body made of

compact and sturdy corrosion resistant

die-cast light alloy, safety tempered

glass lens, with up-throw narrow beam

and asymmetrical wide beam

down-throw, IP 65

H 135 NA "EUROTEC" BLOCK 1 x 18W PLC No. 150.00 E H 115

recessed wall light with die-cast

aluminium housing, stainless steel front

panel, and UV stabilized opal

polycarbonate diffuser, IP55

H 136 NA "EUROTEC" CIN-ECO/FL26 1 x 26W PLC No. 185.00 E H 116

wall mounted up/down light with UV-

stabilized polycarbonate prismatic diffuser,

super pure aluminium reflector & integral

magnetic ballast

H 137 NA "EUROTEC" CING/MINISOSIA Opal 1 x No. 485.00 E H 117

150W metal halide suspended light

die-cast alloy anodised extruded

aluminium housing with extruded

aluminium reflector, opal polycarbonate

diffuser with colour filter attachment

H 138 NA DELETED E H 118


SOR Page 33


H 139 NA "EUROTEC" T0560S 2 x 18W PLC No. 165.00 E H 119

surface mounted with white pressed

steel housing, vacuum metallized silver

anodized reflector & integral

electromagnetic ballast

H 140 "FABRIKANT" 1014 recessed wall mounted No. 177.00 E H 120

luminaire (IP54) with 18W PLC Lamp

H 141 NA "FISCHER" SAPPHIRE wall/ceiling No. 130.00 E H 121

mounted luminaire with 2 x 18W PLC

lamps

H 142 T5 surface mounted fluorescent fitting No. 77.00 E H 122

complete with 1 x 14W T5 warm white/

coolwhite/daylight fluorescent tube

and electronic ballast (OSRAM, Philip, Helvar,

Vossoloh Schwabe) (Simlite, MIE, Product

Design, Davis)

H 143 T5 surface mounted fluorescent fitting No. 94.00 E H 123

complete with 1 x 28W T5

coolwhite/daylight fluorescent tube

and electronic ballast (OSRAM, Philip, Helvar,

Vossoloh Schwabe) (Simlite, MIE, Product

Design, Davis)

H 144 "GHIDINI" OVALLA Cat. No. BL 1101.1 No. 92.15 E H 124

wall mounted luminaire with 2 x 9W or

2 x 11W PL lamps

H 145 "GHIDINI" OVALLA 1103 wall mounted No. 101.85 E H 125

luminaire with die-cast aluminium body

and opal diffuser, side mounting and

2 x 9W or 2 x 11W PL lamps

H 146 "GHIDINI" OVALLA 1104 wall mounted No. 103.90 E H 126

luminaire with die-cast aluminium body

opal diffuser, end mounting and 2 x 9W

or 2 x 11W PL lamps

H 147 NA "GOCCIA" 2898 wall light with 2 x 9W or No. 87.30 E H 127

2 x 11W PL lamps


SOR Page 34


H 148 "GOCCIA" ILLUMINAZIONE TRIANGOLO No. 156.05 E H 128

wall mounted luminaire with 70W SON

or 70W CDM coolwhite or 70W metal

halide lamp polycarbonate

body and vandal proof diffuser

H 149 "GOCCIA" ILLUMINAZIONE TRIANGOLO No. 106.05 E H 311

wall mounted luminaire with 60W or

65W coolwhite/daylight spiral compact

flourescent lamp polycarbonate body and

vandal proof diffuser

H 150 "GOCCIA" TRIANGOLO 4322 wall/ceiling No. 135.40 E H 129

luminaire with 2 x 11W PL lamps and

vandal-proof acrylic diffuser


luminaire with 2 x 18W PL lamps and

vandal-proof acrylic diffuser


luminaire with 70W CDM cool white or 70W

metal halide lamp


luminaire with 60W or 65W cool white /

daylight spiral compact fluorescent lamp

H 154 NA "IGUZZINI GRID" 7058 (IP66) surface No. 140.00 E H 132

mounted fitting in die cast aluminium

frame and frosted polycarbonate diffuser

with 2 x 11W or 2 x 18W PLC lamps

H 155 "ILMAS" STUDIO LINE 1 x 18W No. 63.50 E H 133

fluorescent luminaire with HF Electronic

ballast and daylight / warm white tube

H 156 "ILMAS" STUDIO LINE 1 x 36W No. 75.00 E H 134

fluorescent luminaire with HF Electronic

ballast and daylight / warm white tube

H 157 "REISS" Square light SQL 300/211 No. 106.70 E H 140

ceiling mounted luminaires with 2 x 11W

PL lamps and polycarbonate diffuser

H 158 "JASLITE" AL666046 surface mounted No. 291.00 E H 141

outdoor luminaire, IP43, vandal and

corrosion resistant die-cast aluminium

powder coated body, polycarbonate

diffuser and 18W compact

fluorescent energy saving lamp


SOR Page 35


H 159 "KL LICHT" 6156SO.118 1 x 18W PLC, No. 480.00 E H 142

wall mounted luminaire in die-cast

aluminium body, with clear, frosted or

opal UV stabilised polycarbonate

diffuser and polycarbonate reflector,

IP44

H 160 "KL LICHT KEGEL-HALB" 1121, PLC wall No. 276.00 E H 143

mounted fitting with 18W PLC lamp

H 161 "KL LICHT RADIUS" 1341, PL wall No. 253.00 E H 144

mounted mounted fitting with 11W PL

lamp

H 162 "KL LICHT" ZYLINDER-QUADRO 1581 No. 980.00 E H 145

wall mounted luminaire with 70W

SON or 70W CDM cool white or 70W

metal halide lamp, body in cast aluminium

and cylindrical opal UV- stabilized

polycarbonate diffuser

H 163 "KL LICHT" ZYLINDER-QUADRO 1581 No. 930.00 E H 306

wall mounted luminaire with 60/65W

cool white/daylight spiral compact

fluoresent lamp, body in cast aluminium

and cylindrical opal UV- stabilized


H 164 "KL LICHT" ZYLINDER-QUADRO 1583 No. 1,080.00 E H 146

wall mounted luminaire with 70W

SON or 70W CDM cool white or 70W

metal halide lamp, body in cast aluminium

with anti-glare louvres and built in cylindrical

clear UV-stabilized polycarbonate diffuser

H 165 "KL LICHT" ZYLINDER-QUADRO 1583 No. 1,030.00 E H 307

wall mounted luminaire with 60W/65W

coolwhite/daylight spiral compact

flourescent lamp, body in cast aluminium

with anti-glare louvres and built in cylindrical

clear UV-stabilized polycarbonate diffuser

H 166 "KL LICHT" TRAPEZ 5007 wall mounted No. 687.75 E H 147

luminaire with 70W SON or 70W CDM cool

white or 70W metal halide lamp, body in

cast aluminium and frosted UV-stabilized


H 167 "KL LICHT" TRAPEZ 5007 wall mounted No. 637.00 E H 308

luminaire with 60W /65W coolwhite/daylight

spiral compact fluorescent lamp, body in

cast aluminium and frosted UV-stabilized


H 168 NA "LIGHTCRAFT" AGT 146/P3-2 Telescopic Set 533.50 E H 148

with 2 lanterns and 26W PLC lamps


SOR Page 36



with 1 lantern with 26W PLC lamp


lantern with 26W PLC lamp

H 171 LITE'Z Rounders 2x11 surface mounted No. 110.00 E H 279

fitting c/w die cast aluminium body,

polycarbonate diffuser, intergal magnetic

control gear and 11W tube

H 172 LITE'Z Square illum 2 x 11W PL surface No. 120.00 E H 303

mounted fitting c/w cast aluminium

alloy base and frame, PMMA diffuser,

integral magnetic control gears

H 173 LIGMAN 30252 surface mounted wall No. 225.00 E H 280

light c/w vandal and corrosion resistant

die cast aluminium alloy body, UV

stabilized opal white polycarbonate

diffuser and 1 x PLC 18W 1 x PLC 25W

lamp (IP55)


lgiht c/w vandal and corrosion resistant



diffuser and 1 x PLC 18W / 1 x PLC 26W

lamp (IP55)


light c/w vandal and corrosion resistant




lamp (IP55)

LIGMAN 30074 surface mounted wall No. 225.00 E H 283

H 176 light c/w vandal and corrosion resistant




lamp (IP55)

H 177 "Lucent" 6568 surface mounted light No. 70.00 E H 325

with polycarbonate diffuser with 9W PLlamp

H 178 LUMENAX 8001 1 x 18W surface No. 83.00 E H 284

mounted wall / ceiling luminaire in

corrosion resistant extruded aluminium

housing, aluminium reflector, reeded

prismatic diffuser, gasketed end caps

with counter sunk securing screws c/w

approved HF electronic ballast and

warm shite tube (IP52)

H 179 LUMENAX 8001 1 x 36W surface No. 95.00 E H 285

mounted wall / ceiling luminaire in


housing, aluminium reflector, reeded

prismatic diffuser, gasketed end caps

with counter sunk securing screws c/w

approved HF electronic ballast and

warm white tube (IP52)


SOR Page 37


H 180 NA "LK" SKOT MAXI wall/ceiling mounted No. 360.00 E H 151

luminaire with 70W SON, 70W CDM

coolwhite or 70W metal halide lamp,

polycarbonate diffuser and die-cast

aluminium body

H 181 NA "LOCADI" ARTE STRIPE S2018 wall/ No. 103.90 E H 152

ceiling mounted luminaire with 18W

PLC or 26W PLC or 2 x 9W PL lamps,

die cast aluminium housing and UV

stabilised vandal proof diffuser


ceiling mounted luminaire with 10W PL

or 13W PLC lamp, die cast aluminium

housing and UV stabilised vandal proof

diffuser

H 183 NA "LOCADI" ARTE GRID L1018 wall/ceiling No. 103.90 E H 154

mounted luminaire with 18W PLC or 26W

PLC or 2 x 9W PL lamp, die cast

aluminium housing and UV stabilised

vandal proof diffuser


ceiling mounted luminaire with 10W PL or

13W PLC lamp, die cast aluminium

houseing and UV stabilised vandal proof

diffuser

H 185 NA "LOTHUS" WAGNER 106 wall mounted No. 174.15 E H 156

luminaire with 18W PLC lamp and UV

resistant polycarbonate glazing and cast

aluminium body

H 186 "LUCERNE" 502 wall mounted luminaire No. 100.95 E H 157

with 2 x 11W PL lamps, body in die-cast

aluminium and frosted UV-stabilized


H 187 "LUCERNE" 502 wall mounted luminaire No. 108.95 E H 158

with 2 x 13W or 2 x 18W PLC lamps,

body in die-cast aluminium and frosted

UV-stabilized polycarbonate diffuser

H 188 NA "LUCERNE" 270-G surface mounted wall No. 87.30 E H 159

light (IP54) with 2 x 9W PL lamps

H 189 NA "LUXLITE" wall cylinder WC 150 with No. 236.40 E H 160

2 x 13W PLC lamps


SOR Page 38


H 190 DELETED E H 161

H 191 "LUMENAX WAVE" 9002 or SIMLITE No. 60.00 E H 162

NBS 220 HFS 2 X 18W surface

mounted fluorescent luminaire with

white powder coated steel or aluminium

reflector, reeded ABS or metal end-cap

and cover, and daylight/warm white tube

H 192 DELETED E H 163

H 193 "LUMENAX WAVE" 9004 or SIMLITE No. 78.00 E H 164

NBS 240) 2 x 36W surface mounted

fluorescent luminaire with white powder

coated steel or aluminium, reflector,

reeded ABS or metal end-cap and

end-cover, and daylight/warm white tube

H 194 "LUMENAX WAVE" 9001 1 x 18W surface No. 44.00 E H 165

mounted fluorescent luminaire with white

powder coated steel or aluminium back


and end-cover, and daylight/warm white

tube





and cover, removable gear tray, male &

female connector, electronic ballast

(Philips, Osram, Helvar) and daylight/

warm white tube





and end-cover, and daylight/warm white

tube


SOR Page 39






and cover, removable gear tray, male &


(Philips, Osram, Helvar) and daylight/

warm white tube

H 198 Liedo OD-6930 surface luminaire c/w No. 320.00 E H 291

integral gear & 1x28W/35W T5 linear

fluorescent lamp. Corrosion resistant

extruded aluminium profiles with laser-

cut headers. Stove enamelled I white

(IP20)

H 199 Liedo OD-6260 surace lauminaire c/w No. 315.00 E H 292


fluorescent lamps. Corrosion resistant

extruded aluminium profiles and 3mm

thick headers. Stove enamelled in

white (IP20)

H 200 Liedo OD-6253 surace lauminaire c/w No. 269.00 E H 293


fluorescent lamps. Corrosion resistant

extruded aluminium profiles and 3mm

thick headers. Stove enamelled in

white (IP20)

H 201 Moonlight Vigor pro 1 x 18W compact No. 280.00 E H 294

fluorescent wall mounted luminaire c/w


profile, acrylic UV stabilized diffuser

IP44

H 202 Moonlight 5343 Surface mounted No. 212.00 E H 295

luminaire c/w inegral gear and 1x18W

compact lamp. Corrosion resistant die-

cast aluminium body with stainless steel

screws, durable silicone rubber gaskets

and U.V polycarbonate diffuser (P54)




cast aluminium body with stainless steel screws, durable silicone rubber gaskets









SOR Page 40




















H 208 NA "MATSUSHITA" HS 1002 Opal diffuser No. 129.00 E H 173

with 2 x PL 9W lamps

H 209 NA "MERZ" horizontal downlight with 18W No. 68.85 E H 174

PLC lamp

H 210 NA "MEYER" 16222 wall/ceiling mounted No. 104.75 E H 175

luminaire with opalescent polycarbonate

diffuser, reflector and 13W or 18W PLC

lamp

H 211 NA "MEYER" 16322 wall mounted luminaire No. 86.00 E H 176

in black/white finishing, opalescent

polycarbonate diffuser, die-cast aluminium

housing, ballast, capacitor, mounting

bracket & 18W PLC energy saving lamp

H 212 NA "MEYER" wall mounted luminaire 16322 No. 97.85 E H 177

with opalescent white/transparent

polycarbonate diffuser, reflector

and 13W or 18W PLC lamps

H 213 NA "MODUS PET" 330 Code PN 112.9006 No. 126.10 E H 178

ceiling mounted luminaire with 2 x 11W

compact fluorescent lamps, die-cast

aluminium base and ring with epoxy

powder coating, hammered aluminium

reflector and sand-blasted polycarbonate

diffuser.


SOR Page 41


H 214 NA "NIBA" QUASAR ceiling mounted No. 114.45 E H 179

luminaire Cat No. 3688 with opal diffuser,

frame in orange-Red, pc white base in self

extinguishing thermoplastic & external

stainless steel screws with 2D 28W

warm-white lamp

H 215 NA "NORAL" EXPO IVA wall mounted No. 494.70 E H 180

luminaire with 26W PLC lamp or 50W/

80W mercury super deluxe lamp, bracket

and acrylic diffuser

H 216 NA "NORAL" MARBELLA wall mounted No. 98.95 E H 181

luminaire with 11W PL or 13W PLC or

18W PLC or 2D 16W lamp and


H 217 NA "NORAL" NORA 111F wall mounted No. 577.15 E H 182

luminaire with 13W or 18W PLC lamp or

50W mercury super deluxe lamp and


H 218 NA "NORAL" PORTO wall mounted No. 98.95 E H 183

luminaire with 9W PL or 13W PLC or 18W

PLC or 2D 16W lamp and polycarbonate

diffuser

H 219 NA "NORAL" ROULETTE II A/F wall mounted No. 254.15 E H 184

luminaire in standard black or white finish

with smoke lens made of UV-stabilised

polycarbonate and 13W SL lamp

H 220 NA "NORAL" SAINT TROPEZ wall/ceiling No. 98.95 E H 185

mounted luminaire with 11W PL or 13W

PLC or 18W PLC or 2D 16W lamp and


H 221 NA "NORAL" SANTA CRUZ/MILANO wall/ No. 119.30 E H 186

ceiling mounted luminaire with frosted

polycarbonate diffuser, silver reflector and

38W warmwhite or daylight Lamp

H 222 NA "NORAL" SEVILLA A/F wall mounted No. 342.40 E H 187

luminaire with 13W or 18W or 26W PLC

lamp and polycarbonate diffuser

H 223 NA "NORAL" TORINO A/F wall mounted No. 254.15 E H 188

luminaire in standard black or white finish

with smoke lens made of UV-stabilised

polycarbonate and 9W SL lamp

H 224 NA "NORAL" TRUMPET F wall mounted No. 244.45 E H 189

luminaire with 9W PL lamp, bracket

and polycarbonate diffuser


SOR Page 42


H 225 "NOVALUX" Type 5514 decorative No. 103.90 E H 190

wall mounted luminaire of thermosetting

body with frosted diffuser and 18W PLC

lamp



body with frosted diffuser and 2 x 11W PL

lamps



body with frosted diffuser and 2 x 18W

PLC lamp

H 228 NA "OSRAM" Softlite 18W luminaires lamp No. 180.00 E H 193

H 229 NA "PHILIPS" TCS 058/118 fluorescent No. 69.85 E H 194

luminaire with 18W TLD lamp, in HPF

switch start circuitry and opal diffuser

H 230 NA "PHILIPS" TCS 058/236 fluorescent No. 120.30 E H 195

luminaire with 2 x 36W TLD lamp HPF

switch start circuitry and opal diffuser

H 231 NA "PHILIPS" KOMBI PLB 211 wall mounted No. 148.40 E H 196

vandal-resistant luminaire with 2 x 11W

PL lamps

H 232 NA "PLANET COSMO" CO380/213 decorative No. 90.00 E H 197

ceiling /wall mounted luminaire in cast

aluminium with opal diffuser and 2 x

13W PLC lamp

H 233 NA "PLATEK" LEIPZIG O5 wall mounted light No. 577.15 E H 198

fitting, body made of phosph-chromate

aluminium coated with polyester paint,

UV-stabilised polycarbonate lens and

11W PL or 13/18W lamp

H 234 NA "PLEAID" 175-76122 recessed downlight No. 165.00 E H 199

with matt aluminium reflector and

decorative glass with 18W PLC lamp

(without cone)

H 235 NA "POLOMITI" Square ceiling luminaire with No. 110.60 E H 200

2 x 9W PL or 2 x 11W PL lamps

H 236 "PRISMA" PIUS OVALE 350 spilt wall No. 204.30 E H 201

mounted luminaire with die-cast aluminium

housing and UV stabilized polycarbonate

diffuser


SOR Page 43


H 237 NA "PROLUX" 1080.20 wall mounted fitting No. 104.75 E H 202

with 15W ELN compact fluorescent lamp,

200mm clear globe and wall bracket

H 238 NA "PROLUX" TX118 surface mounted tubular No. 160.05 E H 203

light fittings with 18W fluorescent

lamp and prismatic diffuser

H 239 PULSAR 62030 ceiling mounted luminaire No. 98.00 E H 204

with die cast body 2 x 11W PL lamps

H 240 NA "RAAK" recessed downlight R14-0003 No. 276.45 E H 205

ring diameter 190mm with 18W or 21W

PLC lamp

H 241 "REISS" KK118HF, 1 x 18W weatherproof No. 70.50 E H 269

mounting channel fluorescent fitting IP65

with Osram QTP elctronic ballast, plug-in

connector and Osram L18/31-830 warm

white tube

H 242 "REISS" KK136HF, 1 x 36W weatherproof No. 75.10 E H 270

mounting channel fluorescent fitting IP65

with Osram QTP elctronic ballast, plug-in

connector and Osram L36/31-830 warm

white tube

H 243 NA "ROYCE THOMSON" RTE/PS/KT No. 73.70 E H 206

photocell Kit

H 244 Royal Botania Luce-Fer wall mounted No. 390.00 E H 301

lantern c/w 1x7-11W compact

fluorescent lamp. Body is made of

superior natural materials : zinc alloyt

cast solid brass (IP55)

H 245 Royal Botania Omega wall mounted No. 300.00 E H 302

up-down luminaire c/w 1x20W/35W

Halogen lamp. Body is made of

superior natural material : stainless

steel (IP55)

H 246 NA "SELUX" SX 432-17-2 wall mounted No. 1,010.00 E H 207

luminaire with 50W/80W/125W mercury

super deluxe lamp/26W PLC lamp and



SOR Page 44


H 247 NA "SELUX" Sx 472-20-2 Wall Mounted No. 1,388.00 E H 208

Luminaire in Black FInishing with clear

cylindrical polycarbonate diffuser clear

mirror louvre, cast aluminium filter &

80W HME mecury super deluxe lamp

H 248 "SIEMENS" MONSUN Damp-proof surface No. 68.00 E H 211

mounted luminaire with 36W lamp

H 249 "SIEMENS" MONSUN Damp-proof surface No. 95.00 E H 212

mounted luminaire with 2 x 36W lamp

H 250 "SIEMENS HQL" Super Delux wall No. 250.00 E H 213

mounted fitting custodian with GRP body

injection moulded UV-stabilised

polycarbonate prismatic diffuser, white

sheet steel reflector and 70W CDM cool

white or 70W metal halide lamp

H 251 "SIEMENS HQL" Super Delux wall No. 200.00 E H 309

mounted fitting custodian with GRP body

injection moulded UV-stablised

polycarbonate prismatic diffuser, white

sheet steel reflector and 60W/65W


fluorescent lamp

H 252 "SIMES" Model S6005 ceiling mounted No. 114.45 E H 214

luminaire with 2 x 11W PL lamps

H 253 "SIMES" Model S6008 ceiling mounted No. 119.30 E H 215

luminaire with 2D 38W lamp

H 254 "SIMES" #245 decorative weatherproof No. 85.10 E H 216

surface mounted luminaire of IP54 class 1

protection with body in die cast aluminium

and 13W PLC lamp

H 255 "SIMES" VEDO OVAL Art 6709 wall/ No. 117.95 E H 217

ceiling mounted luminaire with 18W PLC

lamp and sand-blasted polycarbonate

diffuser


SOR Page 45





diffuser




diffuser

H 258 "Tucano" 1312 surface mounted luminaire in No. 140.00 E H 321

cast aluminium with polycarbonate shock-resistant diffuser and PLC 18W lamp

H 259 NA "SIMLITE" BS120 1 x 18W surface No. 44.00 E H 220


powder coated white waveform reflector

or aluminium reflector, reeded ABS or

metal end-cap and cover, removable gear

tray, male & female connector, and


H 260 "SIMLITE" BS120E or LUMENAX WAVE No. 60.00 E H 221

9001 1 x 18W surface mounted

fluorescent luminaire with powder coated

white waveform reflector or aluminium


and cover removable gear tray, male &


(Philips, Osram, VS, Helvar) and daylight/

coolwhite/warm white tube

H 261 NA "SIMLITE" BS136 1 x 36W surface No. 62.00 E H 222


powder coated white waveform reflector,

or aluminium reflector, reeded ABS

or metal end-cap and cover removable

gear tray, male & female connector, and

daylight/coolwhite/warm white tube

H 262 "SIMLITE" BS140E or LUMENAX 9003 No. 80.50 E H 223

1 x 36W surface mounted fluorescent

luminaire with powder coated white

waveform reflector, or aluminium reflector,

reeded ABS or metal and end-cap and

cover removable gear tray, male &


(Philips, Osram, VS, Helvar) warm

white tube


SOR Page 46


H 263 NA "SIMLITE" SB114 T5 1 x 14W non- No. 122.25 E H 271

weatherproof batten c/w DALI T5 high

frequency ballast and Osram T5 warm

white lamp, IP20

H 264 NA "SIMLITE" SB128 T5 1 x 28W non- No. 133.75 E H 272

weatherproof batten c/w DALI T5 high

frequency ballast and Osram T5 warm

white lamp, IP20

H 265 NA "SIMLITE" SB136/M 1 x 36W mounting No. 122.25 E H 273

channel fluorescent fitting with low lost

ballast, two way plug-in connector, Osram

L36/21-840 cool white lamp and two hours

duration simlite emergency power pack

H 266 NA "SIMLITE" WP136 1 x 36W weatherproof No. 54.40 E H 274

fluorescent fitting with low lost ballast, two

way plug-in connector and Osram L36/21-

840 cool white lamp

H 267 "SUPERCLUB" CLUB/DIAMOND or No. 77.60 E H 224

LUMENAX 9003 light fitting with 2D 28

or 38W lamp & accessories

H 268 "SUPER DELTA" OVALE/G (Prisma 1702) No. 70.80 E H 225

light fitting with 2 x 9W PL lamps

H 269 NA "TERMO-LYRA" TL-MO445/11 decorative No. 110.60 E H 226

ceiling light with 11W PL Lamp

H 270 NA "TERMO" 0250/219 ceiling luminaire with No. 110.60 E H 227

diffuser with 2 x PL 9W lamps

H 271 "THORLUX" Cat No. PS 7952S No. 165.85 E H 228

Prismalette bulkheed luminaire

with 2D 38W or 28W lamp or 2 x

PL 11W lamp

H 272 "THORLUX" MERCIAN with 70W high No. 420.00 E H 229

pressure sodium lamp (MER9953) or

70W metal halide lamp (MER9954) or

high power coolwhite/daylight 60/65W



SOR Page 47


H 273 "THORLUX" PASSLIGHT with glass cover No. 415.00 E H 230

70W high pressure sodium lamp

/or 70W metal halide lamp

H 274 "THORLUX" PASSLIGHT with glass cover No. 390.00 E H 326

and 60/65W high power coolwhite/

daylight compact fluorescent lamp

H 275 "THORLUX" PRISMATIC with glass cover No. 250.00 E H 231

and 50W mercury lamp (PR3049)

H 276 "THORLUX" PRISMALUX with glass cover No. 380.00 E H 232

and 80 or 125W mercury lamp or 50 or

70W High Pressure Soidum lamp or

70W metal halide lamp

H 277 Litz plaza mini we60 die cast aluminium pc 450.00 E H 320

wall light mount with frosted hard glass

diffuser, glossy aluminium reflector and

60W/65W high power coolwhite/daylight

compact fluorescent lamp (IP45)

H 278 "THORLUX" HU-STYLE COM indirect No. 820.00 E H 233

lighting system 2 x 55W with electronic

control gear and lamps

H 279 "Tucano" YA136-2 surface mounted wall light No. 250.00 E H 322

in cast aluminium with borax glass diffuserand reflector, 70W/ 150W Son/ metal halide lamp, 80W/ 125W mercury super deluxe lamp lamp

H 280 "Tucano" N14043 surface mounted wall light No. 250.00 E H 323

in polycarbonate with polycarbonate diffuserand reflector, 70W Son/ metal halide lamp,80W mercury super deluxe lamp and gear

H 281 "THORN" FRAS 218 2 x 18W fluorescent No. 156.15 E H 234

luminaires with FRV 236 louvres

H 282 "THORN" BERGAME 100W Halogen wall No. 120.30 E H 235

mounted luminaire


SOR Page 48


H 283 "THORN" CONCEPT A mounted luminaire No. 226.00 E H 236

with 26W PLC lamp

H 284 "THORN" DIAMOND DM 28/38 with No. 130.00 E H 237

separate lamp and gear compartment

and 2D 28W or 38W lamp

H 285 NA "TX" 18W tubular fitting with 75mm No. 149.40 E H 238

diameter low loss ballast starter,

capacitor and L18/31 tube

H 286 "VINIC" 18405/18305 surface mounted No. 180.00 E H 239

wall/ceiling luminaire die cast aluminium

and opal diffuser with 26W PLC lamp and

wall bracket

H 287 "VINIC" 17907/17909 wall mounted No. 335.00 E H 240

luminaire die cast aluminium with 70W

SON/metal halide lamp (IP55)

H 288 "VINIC" 15602 surface mounted luminaire No. 157.00 E H 241

die cast body with white polycarbonate

diffuser and 2 x PLC 18W lamps

H 289 "VINIC" 18004/18007 wall mounted No. 430.00 E H 242

luminaire die cast aluminium with 70W

SON/metal halide lamp (IP55)

H 290 "VINIC" 14101/14102/14103 surface No. 243.70 E H 243

mounted ceiling/wall luminaire similar to

WE-EF' DLB 259-DD-26(I) with

13/18/26W PL-C lamp

H 291 "VINIC" 14503 surface mounted ceiling/ No. 240.00 E H 244

wall luminaire similar to 'WE-EF'

DLG 259-DD-26 with 26W PL-C lamp


SOR Page 49


H 292 NA "WE-EF" QRL-309-E-50/70NI wall No. 600.00 E H 249

mounted luminaire with 50 or 70 SON

lamp and UV stabilised polycarbonate lens

H 293 "WE-EF" DRB259-DD-13(I) recessed wall No. 234.00 E H 250

luminaire, corrosion resistant die-

cast aluminium alloy body and frame,

finish in RAL polyester powder coat,

polycarbonate UV-stabilized and vandal

resistant diffuser, weatherproof IP55 and

durable silicone gasket and 13W PLC

lamp








lamp








lamp

H 296 "WE-EF" DLB259-DD-13(I) surface wall No. 223.60 E H 253







lamp








lamp







durable silicone gasket similar to 'Vinic'

14101/14102/14103 and 13/18/26W PLC

lamp


SOR Page 50


H 299 "WE-EF" DLG 259-DD-26 surface No. 240.00 E H 256

mounted ceiling/wall luminaire similar to

VINIC' 14503 with 26W PL-C Lamp

H 300 "WE-EF" LIGHTSPIKE LSA 050-E-50/80 No. 820.00 E H 257

wall mounted luminaire with

50 or 80W mercury super deluxe lamp, die

cast aluminium body and UV stabilised

polycarbonate lens

H 301 "WE-EF" LIGHTSPIKE LSA 050-E-70H No. 850.00 E H 258


70W metal halide lamp, die cast aluminium

body and UV stabilised polycarbonate lens

H 302 "WE-EF" LIGHTSPIKE LSA 050-E-50/70NI No. 830.00 E H 259


50 or 70W SON lamp, die cast aluminium

body and UV stabilised polycarbonate lens

H 303 NA "ZUMTOBELL" Cat No. HS1002 with 2 x No. 129.00 E H 260

11W PL lamps

H 304 "ZYMI" 3923 decorative wall light with No. 180.00 E H 261

opal diffuser and 18W PLC lamp

H 305 "3E AMANDINE" 1580 decorative wall No. 180.00 E H 262

luminaire in cast aluminium with frosted

diffuser and 18W PLC lamp

H 306 3EI AMANDINE 1601 decorative wall No. 450.00 E H 275

luminaire in aluminium with frosted

methacrylaic diffuser and top round plate

with clear diffuser c/w 70W SON lamp, or

70W CDM cool white or 70W metal

halide lamp integral control gear

and all accessories

H 307 3EI AMANDINE 1601 decorative wall No. 420.00 E H 310

luminaire in aluminium with frosted

methacrylaic diffuser diffuser and top round

plate with clear diffuser c/w 60W/65W


fluorescent lamp integral control gear

and all accessories

H 308 "3EI" 025 decorative updown wall light in No. 285.00 E H 263

cast aluminium lens with 13W PLC and

18W PLC lamp


SOR Page 51


I. FAN

REMOVAL OF EXISTING FAN

I 001 NA Remove existing exhaust, ceiling or wall No. 9.70 E I 1

mounted fans including regulator if any

including reinstatement and disposal off

site (New fan to be measured separately)

EXHAUST FAN

* Supply and install new exhaust fan of the

following size : (Removal of existing fan

to be measured seperately) *(002 004)

I 002 NA Exhaust fan 300mm (KDK, National, No. 97.00 E I 2

Mitsubishi)

I 003 NA Exhaust fan 450mm High Pressure No. 368.60 E I 3

(Industrial Type) (1400 RPM) (KDK,

National, Mitsubishi)

I 004 NA Exhaust fan 600mm High Pressure No. 776.00 E I 4

(Industrial Type)

(920 RPM) (KDK, National, Mitsubishi)

WALL AND CEILING FAN

* Supply and install the following ceiling/

wall fan (Removal of existing fan to be


I 005 NA 400mm diameter auto-rotating ceiling fan No. 158.10 E I 5

(KDK, National, Mitsubishi)

I 006 NA 400mm diameter wall bracket fan with No. 135.80 E I 6

pull cord regulator and switch


I 007 NA 500mm diameter wall bracket fan with No. 280.80 E I 7

pull cord regulator and switch


I 008 NA 508mm diameter wall fan 240V, 1400 rpm No. 240.55 E I 8

50Hz (Wing-Ton Model 303, Imasu/Tornado

Model DF 500-TW)

I 009 NA 635mm (25") diameter wall fan 240V, 1400 No. 250.00 E I 9

rpm 50 Hz (Wing-Ton Model 303, Imasu/

Tornado Model DF 650-TW)

I 010 NA 635mm diameter "KOUKYU" wall fan 240V, No. 230.00 E I 10

1400 rpm 50 Hz Model 303 (MG)

I 011 NA 1.5m diameter sweep ceiling fan No. 72.70 E I 11

regulator and teak board



SOR Page 52


FAN PARTS AND ACCESSORIES

I 012 NA Hook for ceiling fan installed to No. 5.80 E I 12

existing concrete ceiling including cutting

mortice in concrete

I 013 NA Regulator for ceiling fan No. 15.50 E I 13

I 014 NA Fan condenser for 400mm or 500mm No. 12.60 E I 14

diameter wall bracket fan in replacement

I 015 NA Fan gear for industrial wall fan in No. 72.75 E I 15

replacement

FAN REPAIR/INSTALLATION

I 016 NA Repair/rewind of fan motor coil for 400mm No. 38.80 E I 16

or 500mm diameter wall bracket fan

I 017 NA Take delivery from any store, transport, No. 31.20 E I 17

cut stem as required and fix fan and

regulator (hook not included)

J. LAMP, BULB, TUBE & BALLAST

BULB

J 001 NA Tungsten incandescent lamp bulbs 15W No. 1.70 E J 1

to 100W

J 002 NA 60W to 150W Par 38 lamp E27 No. 11.65 E J 2

(Philip, Thorn, Splendour, Sylvania, Osram)

J 003 NA 100W bulb for roof top aviation light No. 2.50 E J 3

J 004 NA 100 watts GLS coiled tungsten No. 4.35 E J 4

incandescent bulb with ES caps

for aircraft warning light

J 005 NA 60-100W 16,000 hrs bulb for aircraft No. 15.00 E J 5

warning light

J 006 NA Par 56 300W 12V or 230V spot or flood No. 50.00 E J 6

J 007 NA Par 64 100-300W GX16D or screw No. 100.00 E J 7

terminal

FLUORESCENT TUBE

* T8 fluorescent tube (26mm dia) (Philips,

Hitachi, GE, Osram, National) *(008 014)

J 008 NA DELETED E J 8

J 009 900mm-30W (daylight) No. 3.10 E J 9

NA

J 010 DELETED E J 10


SOR Page 53


J 011 NA 1500mm-58W (daylight) of 230V No. 3.80 E J 11

J 012 NA 600mm-18W (warm or cool white or No. 3.50 E J 12

daylight) (Philips colour 83/84, GE,

Osram Lumilux 31, Sylvania)

J 013 NA 900mm-30W (warm or cool white) No. 3.75 E J 13

(Philips colour 83/84, GE, Osram Lumilux

31, Sylvania)

J 014 NA 1200mm-36W (warm or cool white or) No. 4.00 E J 14

daylight) (Philips colour 83,

Osram Lumilux 31/21, Sylvania)

* T5 fluorescent tube (15 to 17mm diameter)

(Philips, Osram, GE, Sylvania) *(015 017)

J 015 NA 600mm-14W (daylight, cool white or warm No. 6.00 E J 15

white)


white)


white)

CIRCULAR FLUORESCENT TUBE

* Circular fluorescent tube

(Philips, Osram, GE, Sylvania) *(018 020)

J 018 NA 20-32W daylight / warm white/coolwhite No. 6.00 E J 19

J 019 NA 40W daylight / warm white/coolwhite No. 6.50 E J 20

J 020 NA Osram Circolux-EL 28-32W E27 No. 40.00 E J 23

PARTS & ACCESSORIES FOR

FLUORESCENT FITTING

J 021 NA Lampholder for fluorescent lamp (all tube Pair 1.95 E J 24

diameter and sizes)

J 022 NA Starter for fluorescent lamp No. 1.27 E J 25

(Philips, Osram, Megaman)

J 023 NA Fluorescent starter holder No. 1.25 E J 26

J 024 NA Capacitor 3.25/5/8 mfd for fluorescent No. 2.80 E J 27

lamp

J 025 NA Fused terminal with 2A fuse (BG) No. 6.00 E J 28


SOR Page 54


J 026 NA Moulded prismatic/reeded/opal/frosted No. 12.00 E J 29

diffuser for 1 x 18W or 1 x 36W mounted

channel fluorescent luminaries (for

Aerolite, Eurotec, Ilmas, Lumenax,

Simlite, Thorlux, Philips, ITT-Reiss,

Siemens, Thorn)

J 027 NA Moulded prismatic/reeded/opal/frosted No. 15.00 E J 30

diffuser for 2 x 18W or 2 x 36W mounted

channel fluorescent luminaries (for

Aerolite, Eurotec, Ilmas, Lumenax,

Simlite, Thorlux, Philips, ITT-Reiss,

Siemens, Thorn)

J 028 NA Flat prismatic/reeded/opal/frosted No. 32.00 E J 31

diffuser only for recessed light (Simlite,

Davis, Trimex, Woolite)

J 029 NA End cap or decorative cap of ABS No. 4.00 E J 32

materials for 1 x 18W / 36W fluorescent

luminaires

COMPACT FLUORESCENT LAMP/TUBE

* Compact Fluorescent/Energy Saving

bulb-daylight, warmwhite or coolwhite

(Osram, Philips, Sylanvia, GE) *(030 045)

J 030 NA 5-11W 2 pin (GE Biax-S, Osram Dulux-S, No. 2.63 E J 33

Philips PLS, Sylvania Lynx-S)

J 031 NA 5-11W 4 pin (GE Biax-S/E, Osram No. 7.80 E J 34

Dulux-SE, Philips PLS, Sylvania Lynx-SE)

J 032 NA 10-26W 2 pin (GE Biax-D, Osram Dulux-D, No. 5.20 E J 35

Philips PLC, Sylvania Lynx-D)

J 033 NA 10-26W 4 pin (GE Biax-D/E, Osram No. 12.00 E J 36

Dulux-DE, Philips PLC, Sylvania Lynx-DE)

J 034 NA 13-26W 2 pin (GE Biax-T, Osram No. 12.50 E J 37

Dulux-T or T/IN, Philips PLT, Sylvania

Lynx-T)

J 035 NA 32W 2 pin (Osram Dulux-T or other No. 15.00 E J 38

approved)

J 036 NA 13-26W 4 pin (GE Biax-T/E, Osram No. 17.80 E J 39

Dulux-T/E or T/E/IN, Philips PLT, Sylvania

Lynx-TE)

J 037 NA 32-42W 4 pin (GE Biax-T/E, Osram No. 27.00 E J 40

Dulux-T or T/E/IN, Philips PLT, Sylvania

Lynx-TE)


SOR Page 55


J 038 NA 18-36W 2 pin or 4 pin (GE Biax-L, Osram No. 17.50 E J 41

Dulux-L, Philips PLL, Sylvania Lynx-L-LE)

J 039 NA 40-55W 2 pin or 4 pin (GE Biax-L, Osram No. 19.00 E J 42

Dulux-L, Philips PLL, Sylvania Lynex-L-LE)

J 040 NA 18-36W 4 pin (Osram Dulux F or other No. 27.00 E J 43

approved)

J 041 NA 7-11W (GE Electronic Biax D or M, Osram No. 16.80 E J 44

Dulux-EL, Philips PLEU, Sylvania Mini

Lynx)

J 042 NA 15-25W (GE Electronic Biax T, Osram No. 18.50 E J 45

Dulux-EL, Philips PLET)

J 043 NA 18-25W (Osram Dulux-EL, Eco/Philips SL No. 17.20 E J 46

or other approved)

J 044 NA 10W to 40W 2D warm white or daylight No. 15.50 E J 47

fluorescent lamp 2 or 4 pin

(GE, Thorn)

J 045 60W or 65W self ballasted high power No. 34.00 E J 107

compact fluorescent lamp (coolwhite/

daylight) (Energy and ecobulb)

TUBE FOR EMERGENCY LIGHT / EXIT

SIGN (Philips, Osram, GE, Sylvania)

J 046 NA 8W Fluorescent tube for emergency No. 3.80 E J 48

lights / exit signs

J 047 NA 10W Fluorescent tube for emergency No. 4.00 E J 49

lights / exit signs

COMPACT LAMP ACCESSORY

J 048 NA 2 pin or 4 pin type compact fluorescent No. 2.00 E J 50

tube/2D fluorescent's lamp holder

J 049 NA Screw mounting type compact fluorescent No. 5.25 E J 51

tube's holder

HALOGEN BULB/LAMP/TUBE

J 050 NA 35mm Halogen lamp 12V 20W-50W No. 3.90 E J 52

(Osram, Philip, Thorn)

J 051 NA 51mm Halogen lamp 12V 20W-50W No. 4.20 E J 53

(Osram, Philip, Thorlux)

* Halogen tube double-ended (Philip,

Osram, GE, Sylvania) *(052 054)

J 052 NA 100-250W 77mm R7S tube No. 9.50 E J 54




SOR Page 56


* Halogen tube single-ended (Osram, GE

Sylvania, Halolux, Philips) *(055 056)

J 055 NA 60-250W B15D 230V clear or frosted No. 36.00 E J 57

J 056 NA 60-250W E27 230V clear or frosted No. 32.00 E J 58

* Halogen par E27 230V (Philips, Osram,

Sylvania, GE) *(057 058)

J 057 NA Par 20 50W Spot or flood No. 22.00 E J 59

J 058 NA Par 30 75-100W Spot or flood No. 28.00 E J 60

* Halogen Capsule 12V (Osram, Philips,

GE, Sylvania) *(059 061)

J 059 NA 6V 10W G4 No. 3.00 E J 61

J 060 NA 12V 10-20W G4 No. 3.20 E J 62

J 061 NA 12V 35-100W G6.35 No. 3.50 E J 63

HALOGEN LAMP ACCESSORIES

J 062 NA Ceramic holder for 50W/20W halogen No. 2.00 E J 64

bulb/lamp

J 063 NA 12V transformer 50VA to 75VA for halogen No. 10.50 E J 65

lamp (Vossloh-Schwabe, Optima, TCI)

LAMP FOR GARDEN/STREET LIGHTS

* High Pressure Sodium Vapour SON lamp

with E27/E40 base (Osram, Philips, GE,

Sylvania) *(064 068)

J 064 NA 50-70W E27 (Elliptical or tubular, No. 34.00 E J 66

including built-in Ignitor lamp)

J 065 NA 70-150W Rx7S double-ended No. 90.00 E J 67

J 066 NA 100-150W E40 (Elliptical or tubular) No. 45.10 E J 68

J 067 NA 250W E40 (Elliptical or tubular) No. 55.00 E J 69


* Mercury Lamp with E27/E40 base

(Osram, Philips, GE) *(069 075)

J 069 NA 160W BC or ES Blended/self-ballasted No. 12.90 E J 71

230V

J 070 NA 250W E40 Blended/self-ballasted 230V No. 17.50 E J 72

J 071 NA 50-125W No. 12.90 E J 73

J 072 NA 250W E40 No. 26.00 E J 74


SOR Page 57


J 073 NA 400W E40 No. 32.00 E J 75

J 074 NA Super De-Luxe 50-125W No. 35.00 E J 76

J 075 NA 400W HPI Bus high pressure metal halide No. 96.80 E J 77

gas discharge lamp with E40 base,

"PHILIPS" or other approved type

* Metal Halide Lamp with E40 base (Osram

HQI, Philips HPI/MHN-TD) *(076 081)

J 076 NA 70-150W double-ended Rx7s base No. 78.00 E J 78

(warmwhite, coolwhite, daylight)

J 077 NA 250W double-ended FC2 base (warmwhite, No. 130.00 E J 79

coolwhite, daylight)

J 078 NA 400W double-ended FC2 base (warmwhite, No. 160.00 E J 80

coolwhite, daylight)

J 079 NA 70-150W E27 clear or frosted (warmwhite, No. 95.00 E J 81

coolwhite)



J 082 NA 400W MBIF high pressure metal halide No. 165.85 E J 84

lamp G53455 ignitor & E40, porcelain

lampholder, "THORN" or other approved

type

J 083 NA 250W MBIF metal halide lamp No. 145.50 E J 85

& E40 base "THORH" or other

approved type

J 084 NA 250W SON-T tubular high pressure No. 62.30 E J 86

sodium vapour discharge lamp with E40

base, "PHILIPS" or other approved type

J 085 NA 200 watts E/27 Rough Device lamp bulb No. 14.55 E J 87

J 086 NA 150W "GE" G12 2 pin Metal Halide Lamp No. 75.00 E J 107

BALLAST AND LAMP ACCESSORIES

J 087 NA 1000W metal halide lamp c/w ignitor, No. 442.75 E J 109

ballast and capacitor

J 088 NA Low-loss ballast 18W to 36W for No. 9.40 E J 88

fluorescent and 2-D lamp or 9W to 26W for

compact fluorescent lamp (ATCO, Helvar,

Vossloh Schwabe)

* Non-Dimmable electronic ballast, PSB

tested for the following :- (Osram,

Schwabe, Helvar Tritronic) *(089 093)

J 089 NA 1 x 18W or 36W for T8 26mm diameter No. 35.00 E J 89

fluoresent lamp

J 090 NA 2 x 18W or 36W for T8 26mm diameter No. 55.00 E J 90

fluoresent lamp


SOR Page 58


J 091 NA Multi-watt 14W to 35W for T5 No. 38.00 E J 91

fluorescent lamp

J 092 NA QT 18 - 26W for compact Fluorescent lamp No. 85.00 E J 92

J 093 NA QT 36 - 40W for Dulux-L or PL-L lamp No. 98.00 E J 93

* Dimmable electronic ballast for

fluorescent lamp PSB tested for the

following :- (Osram, Helvar, Schwabe,

Tritronic) *(094 096)




* Ballast for H.I.D lamp (Vossloh-Schwabe,

Atco, Parmar, Helvar) *(097 101)

J 097 NA Mercury 50-125W No. 27.80 E J 96

J 098 NA Mercury 250-400W No. 45.00 E J 97

J 099 NA HPSV (SON) & Metal Halide 70W No. 22.10 E J 98

J 100 NA HPSV (SON) & Metal Halide 100W to No. 39.30 E J 99

150W

J 101 NA HPSV (SON) & Metal Halide 250W to No. 56.60 E J 100

400W

J 102 NA "Dluces" DLS-50W-EDL Electrodeless No. 316.00 E J 110

Discharge Lamp c/w high efficiency

transformer and control gear

J 103 NA "Dluces" DLS-85W-EDL Electrodeless No. 348.00 E J 111

Discharge Lamp c/w high efficiency

transformer and control gear

OTHER LAMP ACCESSORIES

J 104 NA Superimposed ignitor for 70W to 400W No. 38.00 E J 101

high pressure sodium or metal halide lamp

(Philips, Parmer, Bag Turgi, Thorn)

J 105 NA E27 Porcelain lampholder for discharge No. 13.85 E J 102

lamp

J 106 NA E40 Porcelain lampholder for discharge No. 16.50 E J 103

lamp

J 107 NA White moulded insulated bayonet-type No. 4.45 E J 104

batten lampholder, 5 Amp with skirt, 3

terminals and loop-in earth terminal similar

to Delta Cat No. 1031 or other approved

J 108 NA White ceiling rose three terminals 5 Amp No. 4.85 E J 105

similar to Delta Cat No. 1200 or other

approved

J 109 NA Adaptors to lamp holders No. 2.40 E J 106


SOR Page 59


K. LANTERNS

REMOVAL OF EXISTING LANTERN

K 001 NA Remove existing lantern No. 13.60 E K 1

and disposal off site (New fitting to be


LANDSCAPE/GARDEN/CARPARK

LANTERN

* Supply, deliver to site and install the

following including integral control gear,

connecting wiring, mounting brackets,

screws, connections and other accessories

(Removal of existing lantern to be


K 002 "AAL" SLFHW22 with 70W CDM No. 930.00 E K 2

coolwhite or 70W metal halide lamp,

polycarbonate / methacrylate diffuser

K 003 "AAL" SLFHW22 with 60W/65W No. 880.00 E K 205

coolwhite/daylight self ballasted

high power compact fluorescent lamp,

polycarbonate/methacrylate diffuser

K 004 "AAL" Cat no. ALR205 with 70W high No. 905.00 E K 3

pressure sodium or 70W CDM coolwhite

or 70W metal halide lamp and acrylic

diffuser

K 005 "AAL" Cat no. ALR205 with 60W/65W No. 855.00 E K 206


high power compact fluorescent lamp


K 006 'AAL' SLVT LARGENT of one piece cast No. 1,100.00 E K 4

aluminium construction for body with

frosted diffuser, powder coated finish,

performance reflector and 70W SON or

70W CDM coolwhite or 70W metal halide

lamp

K 007 'AAL' SLVT LARGENT of one piece cast No. 1,050.00 E K 207

aluminium construction for body with

frosted diffuser, powder coated finish,

performance reflector and 60W/65W



K 008 "AEC" LUNOID VPC (Flat Lens)/PL (Plain No. 484.50 E K 5

Lens)/CP (reeded Lens) with 70W SON

lamp/70W CDM coolwhite or 70W

metal halide lamp

K 009 "AEC" LUNOID VPC (Flat Lens)/PL (Plain No. 434.50 E K 208

Lens)/CP (reeded Lens) with 60W/65W



K 010 NA "AEG" STRADALUX 470 with 70W SON / No. 760.00 E K 6


lamp and clear/ripped PMMA diffuser


SOR Page 60


K 011 NA "AEG" STRADALUX 470 with 60W/65W No. 710.00 E K 209



K 012 NA "AEG" TRIANGEL TYPE-A1 with 70W No. 1,000.00 E K 7

SON / 70W CDM coolwhite or 70W metal

halide lamp, clear safety glass diffuser

K 013 NA "AEG" TRIANGEL TYPE-A1 with 60W/65W No. 950.00 E K 210


fluorescent lamp, clear safety glass diffuser

K 014 NA "AEC" VISTA 70505/70506/70510 wall No. 733.00 E K 8

mounted luminaire with arcylic diffuser,

louvre and 70W SON or 70W CDM

coolwhite or 70W metal halide lamp

K 015 NA "AEC" VISTA 70505/70506/70510 wall No. 683.00 E K 211

mounted luminaire with arcylic diffuser,

louvre and 60W/65W coolwhite/

daylight self ballasted high power


K 016 NA "AEG" RONDO 1400.006 with reflector, No. 836.10 E K 9

I-shaped galvanised steel

bracket and 70W SON or 70W CDM


K 017 NA "AEG" RONDO 1400.006 with reflector, No. 786.10 E K 9

I-shaped galvanised steel

bracket and 60W/65W coolwhite/



K 018 NA "AEG" RONDO with reflector, I-shapped No. 1,490.00 E K 10

galvanised steel bracket and 2 x 70W SON,

2 x 70W CDM coolwhite or 2 x 70W metal

halide lamp

K 019 NA "AEG" RONDO with reflector, I-shapped No. 1,440.00 E K 212

galvanised steel bracket and 60W/65W

coolwhite/daylight self ballasted high

power compact fluorescent lamp


SOR Page 61


K 020 NA "A+G" QUARTIER 7435/7438 with No. 1,151.00 E K 11

914/011/025 bracket, polycarbonate

diffuser and 70W SON or 70W CDM


K 021 NA "A+G" QUARTIER 7435/7438 with No. 1,101.00 E K 213

914/011/025 bracket, polycarbonate

diffuser and 60W/65W coolwhite/daylight

self ballasted high power compact

fluorescent lamp

K 022 NA "A+G" ZOB 1060 wtih 70W high pressure No. 1,040.20 E K 12

sodium lamp or 70W CDM coolwhite or

70W metal halide lamp and polycarbonate

diffuser

K 023 NA "A+G" ZOB 1060 wtih 60W/65W No. 990.20 E K 214


fluoresent lamp and polycarbonate diffuser

K 024 NA "A+G" FUTURA 1950 with polycarbonate No. 908.90 E K 13



K 025 NA "A+G" FUTURA 1950 with 60W/65W No. 858.90 E K 215



K 026 NA "A+G" KUGEL 7407 with 011 or 023 No. 778.90 E K 14

bracket, polycarbonate diffuser and 70W

SON or 70W CDM coolwhite or 70W metal

halide lamp

K 027 NA "A+G" KUGEL 7407 with 60W/65W No. 728.90 E K 216


fluoresent lamp

K 028 NA "A+G" ALTER WEG 7468 with 70W high No. 1,209.60 E K 15

pressure sodium lamp or 70W CDM

coolwhite or 70W metal haldie


K 029 NA "A+G" ALTER WEG 7468 with 60W/65W No. 1,159.60 E K 217



K 030 NA "A+G" NEUMARKT 7650 with 70W high No. 1,202.80 E K 16

pressure sodium lamp or 70W CDM

coolwhite or 70W metal haldie


K 031 NA "A+G" NEUMARKT 7650 with 60W/65W No. 1,152.80 E K 217



K 032 NA "A+G" WING 1720.022 post top luminaire No. 1,315.00 E K 185

c/w 1 x 70W E27 HSE high pressure

sodium/mercury lamp, die-cast aluminium

housing, polycarbonate diffuser and integral

control gear

K 033 NA "ALCATEL" FG cut off/CL with 70W SON No. 325.00 E K 17

lamp or 70W CDM coolwhite or 70W and

metal halide lamp, and

clear polycarbonate diffuser


SOR Page 62


K 034 NA "ALCATEL" FG cut off/CL with 60W/65W No. 275.00 E K 218



K 035 NA "ALCATEL" URBIS 2000 single post top/ No. 605.20 E K 18

side mounting luminaire with 70W SON or


lamp and clear flat tempered glass/clear

bowl diffuser

K 036 NA "ALCATEL" URBIS 2000 single post top/ No. 605.20 E K 247

side mounting luminaire with 60W/65W



K 037 "ALL" (AL-01-B/1/400MH-240-TCP- No. 810.00 E K 19

BK-PCC) post top mounting luminaire

with 400W metal halide lamp, aluminium

housing, clear tempered glass diffuser

K 038 "ATP" ALAMEDA/EUROPA VIAL with No. 509.00 E K 20

70W SON or 70W CDM coolwhite or 70W

metal halide lamp, body frame in corrosion

resistant glass reinforced polymer and

clear/opal UV-stabilised polycarbonate

diffuser

K 039 "ATP" ALAMEDA/EUROPA VIAL with No. 459.00 E K 219

60W/65W coolwhite/daylight spiral

compact fluorescent lamp, body frame

in corrosion consistant glass reinforced

polymer and clear/opal UV-stabilised



SOR Page 63


K 040 "ARCHITECTURAL" landscape lighting No. 770.00 E K 21

luminaire Cat No. AL-02-R1-125MV-240/50

A-GR with 125W metal halide lamp,

forward throw optical system, heavy gauge

aluminium housing, clear tempered glass

lens and mounting bracket

K 041 "ARCHITECTURAL" landscape lighting No. 850.00 E K 22

luminaire Cat No. AL-02-R1-400MH-240/

50-A-GR with 400W metal halide lamp,

forward threw optical cystem, heavy gauge

aluminium housing, clear tempered glass

lens and mounting bracket

K 042 Arcluce Avenue 7203 1x70/50 post top No. 550.00 E H 189

fitting c/w reinforced technopolymer

cover, polycarbonate diffuser, Vossloh

Schwabe ballast and Osram NAV-E 4Y

70W super sodium lamp IP65


fitting c/w reinforced technopolymer cover,

polycarbonate diffuser, and 60W/65W





cover, polycarbonate diffuser, control

gear and 70W CDM coolwhite or 70W

metal halide lamp


fitting c/w reinforced technopolymer cover,

polycarbonate diffuser, control gear and

60W/65W coolwhite/daylight


fluorescent lamp

K 046 Arcluce Street 7233 1x70/50 post top No. 530.00 E K 191


cover, polycarbonate diffuser, anode

polish & oxidated aluminium reflector,

Vossloh Schwabe ballast and

Osram NAV-E 4Y

70W super sodium lamp IP65



cover, polycarbonate diffuser, anode polish

& oxidated aluminium reflector, and



fluorescent lamp





control gear and 70W CDM coolwhite or



SOR Page 64






control gear and 60W/65W coolwhite/



K 050 ATP LV ref 42.1.76.11.03 1x70W post top No. 950.00 E K 193

fitting c/w polyamide reinforce with fibre

glass body, temper glass diffuser,

polycarbonate cover , 31.2.41.25.03

adapter, integral Vossloh Schwabe

ballast and Osram Nav-T 70W

super sodium lamp IP69

K 051 ATP LV ref 42.1.76.11.03 1x60/65 post No. 900.00 E K 224

top fitting c/w polyamide reinforce with fibre

glass body, temper glass diffuser,

polycarbonate cover, 31.2.41.25.03 adapter,

and 60W/65W coolwhite/daylight


fluorescent lamp

K 052 "BEGA" CAT No. 8071/8074 with 70W No. 999.00 E K 23

SON/70W CDM coolwhite or 70W

metal halide lamp and safety glass diffuser

K 053 "BEGA" CAT No. 8071/8074 with No. 949.00 E K 23



fluorescent lamp and safety glass diffuser

K 054 "BEGA" Cat No. 8081 with symmetrical No. 1,041.00 E K 24

light distribution 70W SON Lamp or


K 055 "BEGA" Cat No. 8081 with symmetrical No. 991.00 E K 225

light distribution 60W/65W coolwhite/




SOR Page 65


K 056 "BEGA" Cat no. 8085 with 70W CDM No. 741.10 E K 25


and symmetrical mirror reflector

K 057 "BEGA" Cat no. 8085 with 60W/65W No. 691.00 E K 226



and symmetrical mirror reflector

K 058 "BEGA" Cat no. 8141 surface washers No. 815.80 E K 26

with 70W SON lamp

K 059 "BEGA" Cat no. 8141 surface washers No. 765.80 E K 227

with 60W/65W coolwhite/daylight

spiral compact fluorescent lamp

K 060 "BEGA" Cat no. 9998 with 80W/125W No. 1,087.00 E K 27

mercury super deluxe lamp and safety

glass diffuser

K 061 NA "BERGNER & WEISER" ELEGANT No. 814.00 E K 28

10212/10215 with out and inside structured

glass cover, cast aluminium, chromatized

and powder coated housing, pure anodized

aluminium mirror reflector and 70W SON

/70W CDM coolwhite or 70W metal halide

lamp

K 062 NA "BERGNER & WEISER" ELEGANT No. 764.00 E K 229

10212/10215 with out and inside structured

glass cover, cast aluminium, chromatized

and powder coated housing, pure anodized

aluminium mirror reflector and 60W/65W


fluorescent lamp


SOR Page 66


K 063 "ARCLUCE" ARES ASIMMETRICO 8154-12, No. 1,380.00 E K 29

with 400W metal halide lamp

K 064 NA "BTI" ARMATUUR KFK Serie 5130 with No. 580.00 E K 30

70W High Pressure Sodium lamp

K 065 NA "DELTA" Cat No. F-24125-M/F-24070-S No. 973.00 E K 31

with 125W metal halide lamp/70W SON

lamp, UV-rays stabilized clear/frosted/

opal polycarbonate diffuser and die-cast

aluminium body

K 066 "DW WINDSOR YORK NEWPORT/YORK No. 963.00 E K 32

WATERFORD/YORK HENLY/DOVER/

HATFIELD" with die-cast aluminium base,

spun aluminium canopy, clear or reeded

polycarbonate diffuser, base cone

reflector, diamond optic variable refelctor

system and 70W SON or 70W CDM


K 067 "DW WINDSOR YORK NEWPORT/YORK No. 913.00 E K 230

WATERFORD/YORK HENLY/DOVER/

HATFIELD" with die-cast aluminium base,

spun aluminium canopy, clear or reeded

polycarbonate diffuser, base cone

reflector, diamond optic variable refelctor

system and 60W/65W coolwhite/



K 068 "ELENCO VEGA" post-top fitting complete No. 810.00 E K 33


K 069 NA "ELTE" CHINESE HAT I 6710/6711 with No. 1,128.00 E K 34

70W SON or 70W CDM coolwhite

or 70W metal halide fixture in

corrosion free aluminium with

inner optical louvred reflector built in

cylindrical clear, frosted or opal UV-

stabilized polycarbonate diffuser

K 070 NA "ELTE" CHINESE HAT I 6710/6711 with No. 1,078.00 E K 232

60W/65W coolwhite/daylight spiral

compact fluorescent lamp in corrosion free

aluminium with inner optical louvred

reflector built in cylindrical clear,

frosted or opal UV-stabilized polycarbonate

diffuser


SOR Page 67


K 071 "ERNST" 381006/370104 with 125W metal No. 861.00 E K 35

halide lamp

K 072 "ERNST" 379004 with 125W metal halide No. 977.50 E K 36

lamp

K 073 NA "EUROTEC" VENEZIA-150 1 x 150W SON No. 425.00 E K 37

or metal halide die-cast corrosion resistant

light alloy, field adjust Asymmetrical/

Symmetrical optic decorative pole light

with colour filter IP54

K 074 "EWO" DR 1001-A Decorative weather No. 719.00 E K 38

proof post top lantern with section

tampered and epoxy powdered coated,

ELN 23W electronic energy saving lamp

K 075 NA "EWO" PYRUS LF with 70W metal halide/ No. 477.20 E K 39

70W SON lamp or 70W CDM coolwhite

and clear or opal diffuser

K 076 NA "EWO" PYRUS LF c/w 60W/65W No. 427.20 E K 233



and clear or opal diffuser

K 077 "FABRIKANT" 4114/4115/4116 400mm dia. No. 330.00 E K 40

spherical opal polyethylene luminaire with


alloy base, heat shield, 70W metal halide,

70W SON or 70W CDM coolwhite lamp




alloy base, heat shield, 60W/65W






alloy base, heat shield, 70W metal halide,

70W SON lamp or 70W CDM coolwhite

lamp




alloy base, heat shield, 60W/65W



K 081 "FABRIKANT" 4034 with corrosion No. 708.00 E K 42

resistant die-cast aluminium alloy body

and canopy, diffuser of UV stabilised and

vandal resistant polycarbonate, anolised

high purity aluminium reflector and 70W

SON or 70W CDM coolwhite lamp


SOR Page 68


K 082 "FABRIKANT" 4034 with corrosion No. 658.00 E K 236


and canopy, diffuser of UV stabilised and

vandal resistant polycarbonate, anolised

high purity aluminium reflector and 60W/

65W coolwhite/daylight self ballasted


K 083 "FABRIKANT" 4120/4121 500mm dia No. 475.00 E K 43

decorative spherical opal polyethylene

luminaire with die-cast aluminium base,

decorative black enamelled aluminium

"BASKET" and 70W SON or 70W CDM

coolwhite or 70W metal halide

K 084 "FABRIKANT" 4120/4121 500mm dia No. 425.00 E K 237

decorative spherical opal polyethylene

luminaire with die-cast aluminium base,

decorative black enamelled aluminium

"BASKET" and 60W/65W coolwhite/



K 085 NA "FIVEP" ALICONE 1 with 70W SON or No. 504.00 E K 45


K 086 NA "FIVEP" ALICONE 1 with 60W/65W No. 454.00 E K 238


fluorescent lamp

K 087 "FUMAGALLI" TOBIA Lantern post-top No. 680.00 E K 46

luminaire with clear or opal diffuser,

and 70W SON, 70W CDM coolwhite or

70W metal halide

K 088 "FUMAGALLI" TOBIA Lantern post-top No. 630.00 E K 239



self ballasted high power


K 089 "FUMAGALLI" NOEMI Lantern post-top No. 680.00 E K 47


and 70W SON, 70W CDM coolwhite or

70W metal halide

K 090 "FUMAGALLI" NOEMI Lantern post-top No. 630.00 E K 240





K 091 "GREISFSWALD" with 125W metal halide No. 1,290.00 E K 48


SOR Page 69


K 092 GGE801 1x150/100 street lantern c/w die No. 588.00 E K 194

cast aluminium body, temper glass

diffuser, Vossloh Schwabe power

reduction ballast Nav-T 150W super

sodium lamp

K 093 Greifswald 1x70W/80W post top fitting No. 1,800.00 E K 195

c/w aluminium body and struts,

galvanized sheel steel canpony, PMMA

diffuser, integral control gear and 70W

sodium and 80W super deluxe mercury

lamp IP54

K 094 Greifswald 1x70W/80W post top fitting No. 1,750.00 E K 241

c/w aluminium body and struts,

galvanized sheel steel canpony, PMMA

diffuser, integral control gear and




K 095 "HELLUX" 034/035 with 70W high pressure No. 930.00 E K 49

sodium / 70W CDM coolwhite or 70W

metal halide lamp and acrylic diffuser

K 096 "HELLUX" 034/035 with 60W/65W No. 880.00 E K 242





SOR Page 70


K 097 "HELLUX" 401-4 with 70W high pressure No. 667.40 E K 50



K 098 "HELLUX" 401-4 with 60/65W coolwhite/ No. 617.40 E K 248

daylight spiral compact fluorescent

lamp and acrylic diffuser

K 099 "HELLUX" 115 with 70W high pressure No. 1,142.70 E K 51



K 100 "HELLUX" 115 with 60/65W coolwhite/ No. 1,092.70 E K 249

daylight spiral compact fluorescent

lamp and acrylic diffuser

K 101 "HOFFMEISTER" BASKETTE Cat No. No. 1,003.00 E K 52

1.2280.1.49.721/1.2280.3.57.721/

1.2273.1.49.721/1.2273.3.57.721/

1.2274.1.49.721/1.2274.3.57.721 of cast

aluminium housing, silver anodized

aluminium reflector and clear acrylic

diffuser with 70W SON or 70W CDM


K 102 "HOFFMEISTER" BASKETTE Cat No. No. 953.00 E K 250

1.2280.1.49.721/1.2280.3.57.721/

1.2273.1.49.721/1.2273.3.57.721/

1.2274.1.49.721/1.2274.3.57.721 of cast

aluminium housing, silver anodized

aluminium reflector and clear acrylic

diffuser with 60/65W coolwhite/daylight


fluorescent lamp

K 103 "HUBBELL"-DUAL Cat No. DSS-A-70S- No. 300.00 E K 53

IPE-3/DSS-A-125C-IPE-3 with 70W high

pressure sodium lamp/70W CDM coolwhite

or 70W metal halide lamp

K 104 "HUBBELL"-DUAL Cat No. DSS-A-70S- No. 250.00 E K 251

IPE-3/DSS-A-125C-IPE-3 with 60/65W


fluorescent lamp

K 105 "INDALUX" QUEBEC 150-IQC/IQV with No. 556.00 E K 54

aluminium canopy, flat glass/frosted

polycarbonate diffuser and 70W SON or


lamp


SOR Page 71


K 106 "INDALUX" QUEBEC 150-IQC/IQV with No. 506.00 E K 252

aluminium canopy, flat glass/frosted

polycarbonate diffuser and 60/65W


fluorescent lamp

K 107 "INDALUX" 150-IJP post top luminaire, No. 662.00 E K 55

L-3071 aluminium spun cover, gravity-cast

L-2520 aluminium alloy attachement, spun

aluminium control gear embellser,

troncopyramidal specular and hammered

aluminium lateral reflector, hemispherical

clear thermoformed UV stabilized

polycarbonate diffuser with 70W SON or


lamp

K 108 "INDALUX" 150-IJP post top luminaire, No. 612.00 E K 253

L-3071 aluminium spun cover, gravity-cast

L-2520 aluminium alloy attachement, spun

aluminium control gear embellser,

troncopyramidal specular and hammered

aluminium lateral reflector, hemispherical

clear thermoformed UV stabilized

polycarbonate diffuser with 60/60W



K 109 INDALUX 150-IQC-M post top luminaire, No. 622.00 E K 56

die-cast aluminium body finished textured

black, reflector of hydro-formed anodised

aluminium with a textured finish lenticular

polycarbonate diffuser with 1 x 70W SON

or 70W CDM coolwhite or 70W metal halide

lamp (IP55)

K 110 INDALUX 150-IQC-M post top luminaire, No. 572.00 E K 254

die-cast aluminium body finished textured

black, reflector of hydro-formed anodised

aluminium with a textured finish lenticular

polycarbonate diffuser with 60/65W



K 111 "INDALUX" IJM post top classical No. 827.00 E K 57

luminaire, gravity-cast L-2520 aluminium

body in a single piece, identical hinged

aluminium alloy upper cover hydro-formed

anodised aluminium reflector, 4mm

tempered sodium-calcium glass bowl

and 70W SON or 70W CDM coolwhite

or 70W metal halide lamp

K 112 "INDALUX" IJM post top classical No. 777.00 E K 255

luminaire, gravity-cast L-2520 aluminium

body in a single piece, identical hinged

aluminium alloy upper cover hydro-formed

anodised aluminium reflector, 4mm

tempered sodium-calcium glass bowl

and 60/65W coolwhite/daylight


fluorescent lamp


SOR Page 72


K 113 "INDALUX" 250-IJB-PK with clear No. 498.00 E K 58

polycarbonate/methacrylate diffuser and

70W SON or 70W CDM coolwhite or


K 114 "INDALUX" 250-IJB-PK with clear No. 448.00 E K 256

polycarbonate/methacrylate diffuser and

60/65W coolwhite/daylight


fluorescent lamp

K 115 INDALUX DOMUS IJX-SMT decorative No. 605.00 E K 188

post top lantern, high impact injected

methacrylate inner prismatic diffuser,

hydroformed and anodized 99.85% pure

aluminium facetted reflector, injected

aluminium attachment c/w integral

control gear and 70W CDM coolwhite or


K 116 INDALUX DOMUS IJX-SMT decorative No. 555.00 E K 257

post top lantern, high impact injected

methacrylate inner prismatic diffuser,

hydroformed and anodized 99.85% pure

aluminium facetted reflector, injected

aluminium attachment c/w integral

control gear and 60/65W coolwhite/



K 117 "I-SUPPREME" with die cast aluminium No. 341.00 E K 62

support, internal aluminium reflector,

impact resistant acrylic conical prismatic

diffuser and spinned aluminium top

canopy, 1 x 70W sodium or 70W CDM


K 118 "I-SUPPREME" with die cast aluminium No. 291.00 E K 258

support, internal aluminium reflector,

impact resistant acrylic conical prismatic

diffuser and spinned aluminium top

canopy, 60/65W coolwhite/daylight



K 119 "KL LICHT" TRAPEZ 5017 with 70W No. 690.00 E K 63

SON or 70W CDM coolwhite or 70W metal

halide lamp, body in cast aluminium and

clear, frosted or opal UV stabilized


50-60 dia.

530

405

60

50-60 dia.

530

405

60


SOR Page 73


K 120 "KL LICHT" TRAPEZ 5017 with 60/65W No. 640.00 E K 259


power compact fluorescent lamp,

body in cast aluminium and clear,

frosted or opal UV stabilized


K 121 "KL LIGHT" TRAPEZ 5042 with 80W metal No. 775.00 E K 64

halide lamp

K 122 "KL LICHT" TRAPEZ 5082 with 70W No. 977.80 E K 65

SON or 70W CDM coolwhite or 70W

metal halide lamp, body in cast

aluminium and clear, frosted

or opal UV-stabilized polycarbonate

diffuser

K 123 "KL LICHT" TRAPEZ 5082 with 60/65W No. 927.80 E K 260


power compact fluorescent lamp,

body in cast aluminium and clear,

frosted or opal UV-stabilized


K 124 "KL LICHT" MODUL 6110/6113, No. 1,019.20 E K 66

ZYLINDER-QUADRO 1716.125/1718.125

with 70W SON or 70W CDM coolwhite or

70W metal halide lamp, body and top cover

in cast aluminium and clear/ frosted/

cylindrical/opal UV-stabilized polycarbonate

diffuser

K 125 "KL LICHT" MODUL 6110/6113, No. 969.20 E K 261

ZYLINDER-QUADRO 1716.125/1718.125

with 60/65W coolwhite/daylight spiral

compact fluorescent lamp, body and top

cover in cast aluminium and clear/ frosted/

cylindrical/opal UV-stabilized polycarbonate

diffuser

K 126 NA "LASCON" SKYLINE 3N with clear or opal No. 530.00 E K 67



K 127 NA "LASCON" SKYLINE 3N with clear or opal No. 480.00 E K 262

diffuser and 60/65W coolwhite/daylight


K 128 NA "LOUIS POULSEN" KIPP-5747-298-811 No. 981.00 E K 68

with 70W SON or 70W CDM coolwhite or


K 129 NA "LOUIS POULSEN" KIPP-5747-298-811 No. 930.00 E K 263

with 60/65W coolwhite/daylight spiral


K 130 NA "LOUIS POULSEN" ORBITER POLE MINI No. 1,201.80 E K 69

5747902437 with 70W SON or 70W CDM



SOR Page 74


K 131 NA "LOUIS POULSEN" ORBITER POLE MINI No. 1,151.80 E K 264

5747902437 with 60/65W coolwhite/daylight


fluorescent lamp

K 132 NA "LOTHUS" CHOPIN 022 with polycarbonate No. 1,171.80 E K 70



K 133 NA "LOTHUS" CHOPIN 022 with polycarbonate No. 1,121.80 E K 265



fluorescent lamp

K 134 NA "LUMEC" Cat no. L80 with 70W high No. 1,111.60 E K 71

pressure sodium/70W CDM coolwhite or

70W metal halide lamp and polycarbonate

diffuser

K 135 NA "LUMEC" Cat no. L80 with 60/65W No. 1,061.60 E K 266


fluorescent lamp and polycarbonate

diffuser

K 136 LIGMAN 20581 indirect light post top No. 980.00 E K 189

luminaire c/w die cast aluminium

housing with high corrosion resistance,

white painted aluminium reflector on

the top luminaire, stainless steel

screws, anodized high purity

aluminium reflector, remote control

gear and 1 x 70W SON or 70W CDM


K 137 LIGMAN 20581 indirect light post top No. 930.00 E K 267

luminaire c/w die cast aluminium


white painted aluminium reflector on

the top luminaire, stainless steel

screws, anodized high purity

aluminium reflector, remote control

gear and 60/65W coolwhite/daylight


fluorescent lamp

K 138 NA "MARLIN" SKYLINE SKYC 7012N with No. 685.00 E K 72

70W SON or 70W coolwhite or 70W metal

halide lamp high temperature

plastic diffuser and stainless steel louvre

K 139 NA "MARLIN" SKYLINE SKYC 7012N with No. 635.00 E K 268



fluorescent lamp high temperature

plastic diffuser and stainless steel louvre

K 140 NA "NORAL" CONSUL/DSLD/EXPO IV with No. 685.60 E K 76

70W SON or 70W CDM coolwhite or 70W

metal halide lamp and clear/opalescent

acrylic/polycarbonate diffuser and

asymmetrical/symmetrical reflector

K 141 NA "NORAL" CONSUL/DSLD/EXPO IV with No. 635.60 E K 269



fluorescent lamp and clear/opalescent

acrylic/polycarbonate diffuser and

asymmetrical/symmetrical reflector


SOR Page 75


K 142 Moonlight Diva post top lantern c/w No. 810.00 E K 190

integral gear & 70W SON or 70W CDM

coolwhite, 70W metal halide lamp,

60/65W self ballasted high power

compact fluorescent lamp.

Corrosion resistant die-

cast aluminium optical housing with

stainless steel screws, durable silicone

rubber gaskets and tempered safety

glass (IP65)

K 143 Moonlight Nova post top lantern c/w No. 870.00 E K 191

integral gear 70W SON or 70W CDM

coolwhite, 70W metal halide lamp,

60/65W spiral compact fluorescent

lamp.

Corrosion resistant die-cast

aluminium optical housing with

stainless steel screws, durable silicon


glass (IP65)

K 144 Moonlight Olympic post top lantern c/w No. 950.00 E K 192

integral gear 1x70 metal halide, or 70W

SON or CDM coolwhite lamp, 60W/65W


fluorescent lamp.





glass (IP65)

K 145 Moonlight Santa post top lantern c/w No. 700.00 E K 193

integral gear 1x70 metal halide, 70W

CDM coolwhite 60W/65W self ballasted

high power compact fluorescent lamp.




rubber gaskets and clear acrylic diffuser

(IP54). High efficiency optical system in

vertical lamp. Aluminium lourve system

providing glare control

K 146 Moonlight Terra post top lantern c/w No. 600.00 E K 194


CDM coolwhite 60W/65W self ballasted

high power compact fluorescent lamp.





(IP54). High efficiency optical system in

vertical lamp. Aluminium lourve system

providing glare control

K 147 Moonlight Ultra post top lantern c/w No. 1,680.00 E K 195


SON or, 70W CDM coolwhite lamp,

60W/65W self ballasted high power

compact fluorescent lamp.





(IP65)


SOR Page 76


K 148 Moonlight Elegant indirect post top No. 1,350.00 E K 196

lantern c/w integral gear 1x150W metal

halide lamp. Corrosion resistant die-




glass (IP65)

K 149 Moonlight Futura indirect post top No. 1,500.00 E K 197






glass (IP65)

K 150 Moonlight Merlot indirect post top No. 1,500.00 E K 198






glass (IP65)

K 151 Moonlight Metropolian indirect post top No. 1,800.00 E K 199






glass (IP65)

K 152 Moonlight Tecna indirect post top No. 1,450.00 E K 200






glass (IP65)

K 153 Moonlight digna 1 x 36W 726 lamp c/w No. 850.00 E K 201


profile. Direct lighting system with two

sided light output IP54


SOR Page 77


K 154 Moonlight aura mega 1 x 70W HIT lamp No. 1,400.00 E K 202

c/w corrosion resistant extruded

aluminium profile. Direct lighting

system with three sided light output

IP44

K 155 Moonlight era 1 x 70W HIT lamp c/w No. 1,300.00 E K 203


profile. Direct lighting system with four


K 156 Moonlight Lana 2 x 18W T26 lamp c/w No. 1,200.00 E K 204


profile. Direct lighting system with two


K 157 NA "PGL" CARANDINI DQM-400/DQF-400 No. 297.00 E K 77

polycarbonate opal/clear/smoke diffuser,

400mm dia. spherical lantern with 70W

metal halide or 70W CDM coolwhite

K 158 NA "PGL" CARANDINI DQM-400/DQF-400 No. 247.00 E K 243

polycarbonate opal/clear/smoke diffuser,

400mm dia. spherical lantern with 60W/

65W self ballasted high power compact

fluorescent lamp

K 159 NA "PGL" CARANDINI ML-250/TS 650 x No. 369.00 E K 78

590mm/332 x 588mm cylinder clear

lantern aluminium plate top canopy with


70W metal halide

K 160 NA "PGL" CARANDINI ML-250/TS 650 x No. 319.00 E K 244

590mm/332 x 588mm cylinder clear

lantern aluminium plate top canopy with



K 161 NA "PHILIPS" Cat No. SPP 133/HPP No. 352.00 E K 79

133/SPP 133 PCT with opal-white/frosted

polycarbonate sphere and 70W

SON or 70W CDM coolwhite or 70W

metal halide

K 162 NA "PHILIPS" Cat No. SPP 133/HPP No. 302.00 E K 245

133/SPP 133 PCT with opal-white/frosted

polycarbonate sphere and 60W/65W


fluorescent lamp

K 163 NA "PILOTINE" with 70W SON or 70W CDM No. 378.30 E K 80

coolwhite or 70W metal halide

K 164 NA "PILOTINE" with 60W/65W self ballasted No. 328.30 E K 246



SOR Page 78


K 165 "PRISMA" KONOS PARK 38 with 70W No. 608.20 E K 81

metal halide/70W SON lamp and

ice-etched high impact acrylic diffuser

K 166 NA "RAAK" ELIPSE cat no. S-2389.1321 with No. 562.60 E K 82

70W SON lamp

K 167 NA "RAAK" KOSMOS 430mm diameter No. 697.00 E K 83

lantern Cat No. S2280.8000/S2280.7000

with 80W metal halide/70W SON lamp

K 168 NA "RAAK" OCTAHEDRON S-2387.1321 with No. 898.20 E K 84

70W SON/70W metal halide lamp

K 169 "RAGNI" RAMATUELLE 38 with 70W CDM No. 795.00 E K 85

coolwhite or 70W metal halide lamp c/w

methacrylate diffuser

K 170 "RAGNI" THAIS Cat No. PR0550 with No. 599.00 E K 86


70W metal halide and

clear/frosted polycarbonater/


K 171 "RAGNI" THAIS Cat No. PR0550 with No. 549.00 E K 270

60/65W coolwhite/daylight self ballasted


and clear/frosted polycarbonater/


K 172 NA "ROGER PRADIER" PV4 with body of No. 509.00 E K 87

aluminium with special treatment against

corrosion, opal or smoked makrolon

diffuser and 70 SON or 70W CDM coolwhite

or 70W metal halide

K 173 NA "ROGER PRADIER" PV4 with body of No. 459.00 E K 271

aluminium with special treatment against

corrosion, opal or smoked makrolon



fluorescent lamp

K 174 NA "SEDONA" 22A 10 FIN post top double No. 2,110.00 E K 88

lantern housing of extruded aluminium with

tempered glass lens, double arm bracket

and 2 x 125W metal halide lamp

K 175 NA "SELUX" Cat No. SX 616-10-2/SX 616-11-2 No. 1,077.00 E K 89

with clear polycarbonate diffuser,

asymmetrical/symmetrical reflector and

70W - 150W SON/CDM coolwhite or metal

halide lamp


SOR Page 79


K 176 NA "SELUX" Cat No. SX 616-10-2/SX 616-11-2 No. 1,027.00 E K 272

with clear polycarbonate diffuser,

asymmetrical/symmetrical reflector and

60/65W coolwhite/daylight self ballasted


K 177 NA "SELUX" Cat no. SX480-11-2/SX480-12-2/ No. 1,009.80 E K 90

SX480-19-2/SX480-14-2/SX-15-2/

SX480-20-2/SX480-17-2/SX480-18-2/

SX480-21-2 with clear cylindrical

diffuser, white/mirror louvre/MRT 150

reflector with 70W SON or 70W CDM


K 178 NA "SELUX" Cat no. SX480-11-2/SX480-12-2/ No. 959.80 E K 273

SX480-19-2/SX480-14-2/SX-15-2/

SX480-20-2/SX480-17-2/SX480-18-2/

SX480-21-2 with clear cylindrical

diffuser, white/mirror louvre/MRT 150

reflector with 60/65W coolwhite/daylight


fluorescent lamp

K 179 NA "SELUX" HISTO Cat no. SX635-10-2/ No. 1,009.80 E K 91

SX635-11-2/SX635-12-2 with sand-blasted

polycarbonate diffuser, white/mirror

louvre/MTR 150 refractor and curved steel

bracket with 70W SON/2 x 70W

metal halide lamp

K 180 NA "SELUX" SX 470-20-2 post top single unit No. 1,086.00 E K 92

luminaire in black finishing with clear

cylindrical polycarbonate diffuser clear

mirror louvre, cast aluminium filter,

1 x 125W metal halide lamp


SOR Page 80


K 181 "SIEMENS" AURIS post-top luminaire with No. 620.00 E K 93

PMMA housing, screwed-on aluminium

canopy (5NA 485 2-1AA1),

70W metal halide or 70W

CDM coolwhite lamp

K 182 "SIEMENS" AURIS post-top luminaire with No. 570.00 E K 283

PMMA housing, screwed-on aluminium

canopy (5NA 485 2-1AA1), 60W/65W


fluorescent lamp

K 183 "SIEMENS" CITYLIGHT PLUS cat no. No. 1,092.20 E K 94

5NA-5262-1C of die-cast cast aluminium

housing, pagoda specular reflector system

and acrylic diffuser with 70W metal halide

or 70W CDM coonwhite lamp

K 184 "SIEMENS" CITYLIGHT PLUS cat no. No. 1,042.20 E K 284

5NA-5262-1C of die-cast cast aluminium

housing, pagoda specular reflector system

and acrylic diffuser with 60W/65W


fluorescent lamp

K 185 "SIEMENS" CITYLIGHT CLASSIC with No. 1,212.50 E K 95

sturdy glass enclosures, cast iron post-

top section cover by an elegant plastic

flange shape collar 70W SON/70W

metal halide lamp

K 186 "SIEMENS" CITYLIGHT ELEGANCE with No. 1,212.50 E K 96



flange shape collar 70W SON or 70W

metal halide or 70W CDM coolwhite lamp

K 187 "SIEMENS" CITYLIGHT ELEGANCE with No. 1,162.50 E K 285



flange shape collar 60W/65W


fluorescent lamp

K 188 NA "SIEMENS" Cat 5NA 7482-ICKO/ No. 619.00 E K 97

7482-3UKO with built in 70W metal

halide or 70W CDM coolwhite lamp

K 189 NA "SIEMENS" Cat 5NA 7482-ICKO/ No. 569.00 E K 286

7482-3UKO with built in 60W/65W


fluorescent lamp


SOR Page 81


K 190 "STERNER" FRANKLYN III Cat No. No. 940.00 E K 98

FK20-10-3-N of extruded aluminium

construction with clear tempered lens,

performance aluminium reflector and

70W SON or 70W metal halide or

70W CDM coolwhite lamp

K 191 "STERNER" FRANKLYN III Cat No. No. 890.00 E K 287

FK20-10-3-N of extruded aluminium

construction with clear tempered lens,

performance aluminium reflector and



K 192 "STERNER" SEDONA Cat No. No. 996.00 E K 99

SED22-10FT with 70W metal haldie or


K 193 "STERNER" SEDONA Cat No. No. 946.00 E K 288

SED22-10FT with 60W/65W



K 194 "STERNER" MANCHESTER of aluminium No. 952.00 E K 100

extrusion construction with powder coat

finish, clear lens, IES type II

performance reflector, straight arm and

70W SON or 70W metal halide or 70W

CDM coolwhite lamp

K 195 "STERNER" MANCHESTER of aluminium No. 902.00 E K 289


finish, clear lens, IES type II




K 196 "STERNER" MARQUETTE of No. 991.30 E K 101

aluminium extrusion construction, with

powder coat finish, clear lens,

IES Type II performance reflector,

straight arm and 70W SON or

or 70W metal halide or 70W

CDM coolwhite lamp

K 197 "STERNER" MARQUETTE of No. 941.30 E K 290

aluminium extrusion construction, with

powder coat finish, clear lens,

IES Type II performance reflector,

straight arm and 60W/65W




SOR Page 82


K 198 "STERNER" SIERRA of aluminium No. 991.30 E K 102


finish, clear lens, IES Type II Horz


70W SON or 70W metal halide or 70W

CDM coolwhite lamp

K 199 "STERNER" SIERRA of aluminium No. 941.30 E K 291


finish, clear lens, IES Type II Horz




K 200 "THORN" LEMNIS CITY SCAPE QGH No. 685.00 E K 103

decorative post top lantern with 70W

SON or 70W metal halide or 70W

CDM coolwhite lamp

K 201 "THORN" LEMNIS CITY SCAPE QGH No. 635.00 E K 292

decorative post top lantern with



K 202 "THORN" JOHANNA QGJ 1070-4/7351 No. 454.00 E K 104

with 50W - 70W SON or 70W metal halide

or 70W CDM coolwhite lamp

K 203 "THORN" JOHANNA QGJ 1070-4/7351 No. 404.00 E K 293

with 60W/65W self ballasted high power


K 204 "THORN" EUROPHANE Cat No. LEMNIS No. 668.00 E K 106

RIS 701 with 70W SON or 70W metal


K 205 "THORN" EUROPHANE Cat No. LEMNIS No. 618.00 E K 294

RIS 701 with 60W/65W self ballasted


K 206 "THORN" EUROPHANE twin luminaire No. 1,271.70 E K 107

with polycarbonate/methcrylate diffuser

and 70W metal halide or 70W CDM

coolwhite lamp

K 207 "THORN" EUROPHANE twin luminaire No. 1,221.70 E K 295

with polycarbonate/methcrylate diffuser

and 60W/65W self ballasted



SOR Page 83


K 208 "THORN" AVENUE XL with 70W SON No. 1,011.70 E K 108

or 70W metal halide or 70W CDM

coolwhite lamp

K 209 "THORN" AVENUE XL with 60W/65W No. 961.70 E K 296


K 210 "VINIC" 41305/41405 decorative post top No. 820.00 E K 109

luminaire, vandal and corrsion resistant

die cast aluminium alloy body, U.V.

stabilized opal/clear polycarbonate

diffuser, anodised high purity aluminium

reflector and 70W SON or 70W metal


K 211 "VINIC" 41305/41405 decorative post top No. 770.00 E K 297

luminaire, vandal and corrsion resistant

die cast aluminium alloy body, U.V.

stabilized opal/clear polycarbonate

diffuser, anodised high purity aluminium

reflector and 60W/65W self ballasted


K 212 "VINIC" 42006 decorative post top No. 820.00 E K 110

luminaire, corrosion resistant die cast

auminium alloy body, U.V. stabilized high

impact acrylic diffuser, white powder

coated aluminium stepped reflector with

70W SON or 70W metal halide or


K 213 "VINIC" 42006 decorative post top No. 770.00 E K 298

luminaire, corrosion resistant die cast

auminium alloy body, U.V. stabilized high

impact acrylic diffuser, white powder

coated aluminium stepped reflector with



K 214 "JASLITE" D37 Post Top Lantern, IP55, No. 370.00 E K 274

dustproof and jetproof. Die-cast aluminium

body and canopy. Acrylic Diffuser. Durable

and weathproof rubber gasket.

Powdercoated in black RAL9004 or any

other standard RAL colour. (Anodized high

purity aluminium reflector, chemically

brightened, c/w 70W SON/125 mercury

lamp)


SOR Page 84


K 215 NA "VULKAN" Cat No. 8466 with 70W SON No. 1,064.00 E K 111

or 70W metal halide or 70W CDM

coolwhite lamp

K 216 NA "VULKAN" Cat No. 8466 with 60W/65W No. 1,014.00 E K 299


K 217 "Ingo" BT170 decorative post top in cast No. 585.00 E K 275

aluminium with prismatic diffuser and

1 X 70W high pressure sodium lamp/ 125W

mercury super deluxe lamp and integral

control gear

K 218 "WE-EF" SK409-E-80/125 MV(K), No. 330.00 E K 112

SK409-E-70/NI(K) 400mm dia spherical

opal polyethylene luminaire with


alloy base, heat shield and 70W

metal halide or 70W CDM coolwhite lamp

K 219 "WE-EF" SK409-E-80/125 MV(K), No. 280.00 E K 300

SK409-E-70/NI(K) 400mm dia spherical

opal polyethylene luminaire with


alloy base, heat shield and 60W/65W


fluorescent lamp

K 220 "Ingo" LPH8402 decorative post top in cast No. 450.00 E K 276

aluminium with tempered glass diffuser and

1 X 70W high pressure sodium lamp/ 125W

mercury super deluxe lamp and integral

control gear

K 221 "Ingo" YS/FYZT8430 decorative post top in No. 440.00 E K 277

cast aluminium with tempered glass diffuser

and 1 X 70W high pressure sodium lamp/

125W mercury super deluxe lamp and

integral control gear


SOR Page 85


K 222 NA "WE-EF" SK459-E-80/125MV(K), No. 360.00 E K 113

SK459-E-70/N1(K) 450mm dia spherical

opal polyethylene luminaire with corrosion

resistant die-cast aluminium alloy base,

heat shield and 70W metal halide or


K 223 NA "WE-EF" SK459-E-80/125MV(K), No. 310.00 E K 301

SK459-E-70/N1(K) 450mm dia spherical

opal polyethylene luminaire with corrosion

resistant die-cast aluminium alloy base,

heat shield and 60W/65W self ballasted


K 224 "WE-EF" SKF450-E-80/125MV(K), No. 501.80 E K 114

SKF450-E-70/N1(K) 450mm dia. frosted

or clear polycarbonate spherical luminaine

with corrosion resistant die-cast aluminium

alloy base, heat shield and 70W metal


K 225 "WE-EF" SKF450-E-80/125MV(K), No. 451.80 E K 302

SKF450-E-70/N1(K) 450mm dia. frosted

or clear polycarbonate spherical luminaine

with corrosion resistant die-cast aluminium

alloy base, heat shield and 60W/65W


fluorescent lamp

K 226 "WE-EF" SKL400-E-80/125MV(K), No. 487.00 E K 115

SKL400-E-70/N1(K) 400mm dia. spherical

clear polycarbonate luminaire with


alloy base, anodized high purity

aluminium reflector and 70W metal


K 227 "WE-EF" SKL400-E-80/125MV(K), No. 437.00 E K 303

SKL400-E-70/N1(K) 400mm dia. spherical

clear polycarbonate luminaire with


alloy base, anodized high purity

aluminium reflector and 60W/65W


fluorescent lamp


SOR Page 86


K 228 "WE-EF" ZA600-E-70/N1(K) or No. 900.00 E K 116

500-E-70/N1(K) with corrosion resistant

die-cast aluminium alloy body and

canopy, diffuser or UV stabilized and

vandal resistant polycarbonate, anodized

high purity aluminium reflector and

70W sodium lamp

K 229 "WE-EF" ASP 504-E-70/NI [K] pendent No. 837.00 E K 117

mounted lantern with corrosion resistant

die-cast aluminium alloy body, diffuser

of UV stabilized and Polycarbonate Clear-

Patterned equipped with glare restriction

and light control reflectors and 70W

sodium lamp and pole bracket

K 230 "WE-EF" ZA600-E-80/125(K) with No. 920.30 E K 118


alloy body and canopy, UV stabilized and

vandal resistant polycarbonate diffuser

and anodized high purity aluminium

reflector and 70W metal halide or 70W

CDM coolwhite lamp

K 231 "WE-EF" ZA600-E-80/125(K) with No. 850.00 E K 304


alloy body and canopy, UV stabilized and

vandal resistant polycarbonate diffuser

and anodized high purity aluminium

reflector and 60W/65W self ballasted


K 232 "WE-EF" 01.ALY359-DT-18/26(I) with No. 534.20 E K 119

corrosion resistant aluminium alloy body,

bracket and post, polycarbonate UV

stabilized and vandal resistant diffuser

and 18W/26W PLC lamp and finish in RAL

polyester power coat


SOR Page 87


K 233 "WE-EF" LSA050-E-50/80 No. 716.00 E K 120

IP55/LSA050-E-70/H IP55/

LSA050-E-50/70/NI IP55 lightspike

dustproof and jetproof conforming to DIN,

VDE, IEC.Class1. Corrosion resistant

die-cast aluminium and vandal resistant.

Weatherproof and durable silicone rubber

gasket. Anodized high purity aluminium

reflector and 50W - 70W sodium lamp/

70W CDM coolwhite or 70W

metal halide

K 234 "WE-EF ASP509-E-80/125/ASP509-E-70 No. 1,100.00 E K 121

decorative posttop Intern IP55, in


alloy body. Diffuser made from UV

stabilized and vandal resistant

polycarbonate, anodized high purity

aluminium reflector and 70W SON,

70W CDM coolwhite or 70W metal halide.

Finish in RAL black power coat polyester

paint and 12A1500/76 mounting bracket

only

K 235 "WE-EF" CA504-E-80/125(K) or No. 569.40 E K 122

50/70/NI(K) with corrosion resistant

aluminium alloy body, polycarbonate

diffuser and vandal resistant, anodized

high purify aluminium reflector,

chemically brightened, complete with 70W

SON, 70W CDM coolwhite or 70W metal

halide and KC1.76 adapter, BA1/720.76

bracket and finish in RAI polyester

powder coat

K 236 "WE-EF" BSP704/504-E-80/125(K) or No. 1,074.80 E K 123

50/70/ N1(K) with corrosion resistant

aluminium alloy body and canopy,

UV stabilized and vandal resistant

polycarbonate diffuser, anodized high

purity aluminium reflector and 70W SON,


and BA1/420.76 or 580.76 bracket and

finish in RAL polyester powder coat


SOR Page 88


K 237 "WE-EF" area light luminaire No. 489.40 E K 124

SBL100-E-50/70/NI(K) or

SBL100-E-80/125(K) with corrosion

rsistant aluminium alloy body, thermal

shock resistant safety glass in a hinged

aluminium frame and stainless steel

fasteners, anodized high purity chemically

brightened aluminium refelctor and 70W


halide and KS1.76 adaptor and finish in RAL

polyester powder coat

K 238 NA "2K KEMPE & KLAUS" SCHWABENI No. 1,166.90 E K 125

Cat No. 6803021 or SERIE SCHWABEN

II PE 6803320 with 70W SON, 70W CDM

coolwhite or 70W metal halide and UV

stabilized clear polycarbonate diffuser

K 239 NA "2K KEMPE & KLAUS" SERIE No. 1,208.60 E K 126

SCHWABEN II PE 6803320 with 70W SON,


and UV stabilize clear polycarbonate

diffuser

K 240 NA "2K KEMPE & KLAUS" SERIE No. 1,249.40 E K 127

SCHWABEN II PE 6803320 with 70W SON,



diffuser

K 241 NA "2K KEMPE & KLAUS" PARK Cat No. No. 969.00 E K 128

6800600 with 70W SON, 70W CDM

coolwhite or 70 W metal halide


diffuser

K 242 NA "2K KEMPE & KLAUS" GMBH SERIE No. 1,750.00 E K 129

REICHENBACH code 6805101 single

arm mounted luminaire with 70W high

pressure sodium lamp and clear

polycarbonate diffuser IP54


REICHENBACH code 6805101 single

arm mounted laminaire with 70W SON,


and clear polycarbonate diffuser IP54


REICHENBACH code 6805101 twin arm

mounted luminaire with 2 (1 x 125W) metal

halide lamp and clear polycarbonate

diffuser IP54

K 245 "3E" AMANDINE D500 MRL/D700MRL/ No. 800.70 E K 132

MRV with 70W SON, 70W CDM coolwhite

or 70W metal halide and clear/pearl/opal

methacrylate diffuser and single arm

bracket


SOR Page 89


K 246 "3E AMANDINE" D700 (ORCHIDEE) No. 850.00 E K 133

decorative post top luminaire with clear

diffuser and 70W SON lamp

K 247 "3E" AMANDINE D500 MRL/D700 MRL No. 861.40 E K 134

with 70W SON, 70W CDM coolwhite or

70W metal halide and clear/pearl/opal

methacrylate diffuser and single arm bracket

K 248 "3E" AMANDINE MRV with 70W SON, No. 881.70 E K 135

70W CDM coolwhite or 70W metal

clear/pearl/opal methacrylate diffuser

and single arm bracket

K 249 "3E" COBRA FDL-D2/VP/VB/VM/VG with No. 1,152.40 E K 136

clear/pearl/opal methacrylate diffuser, 70W


halide and separate ignitor and

single arm mounting bracekt

K 250 "3E" COMPASS Cat no. FDL-D2-VP with No. 1,206.70 E K 137

70W high pressure sodium/70W CDM

coolwhite or 70W metal halide, clear/pearl/

opal methacrylate diffuser and single arm

mounting bracket

K 251 "3E" EVASION Cat no. FDL-D2-VP- No. 1,162.10 E K 138

VB-VM-VG with 70W SON, 70W CDM

coolwhite or 70W metal halide, clear/pearl/

opal methacrylate diffuser and single arm

mounting bracket

K 252 "3E" HIRONDELLE FDS-D2-VM/VB/ No. 1,177.60 E K 139

VP/VG with clear/pearl/opal methacrylate

diffuser, 70W CDM coolwhite or 70W

metal halide/70W SON

lamp, seperate ignitor and single arm

mounting bracket

K 253 "3E" LIBELLULE FDL-D2/D-VB/VP/VM/VG No. 1,234.00 E K 140

with clear/pearl/opal methacrylate

diffuser, 70W SON/70W CDM coolwhite or

70W metal halide, separate ignitor, and

single arm mounting bracket

K 254 "3E" PYROS Cat no. FDL-D2-VM with No. 906.00 E K 141

70W high pressure sodium/70W CDM

coolwhite or 70W metal halide,

clear/pearl/opal

methacrylate diffuser and single arm

mounting bracket


SOR Page 90


K 255 "3E" SYGMA FD-D2-VB/VP/VM/VG with No. 1,206.70 E K 142

clear/pearl/opal methacrylate diffuser,

70W SON/70W CDM coolwhite or 70W

metal halide, separate ignitor and single

arm mounting bracket

STREET LIGHTING'S LANTERN

* The following street lighting lantern

with 70W to 150W high pressure sodium

lamp, and integral compensated control

gear and diffuser (Removal of existing

lantern to be measured


K 256 "SIEMENS" 5NA392ST50/5NA585 No. 320.00 E K 143

SIOPTAL

K 257 Eye H729 die cast aluminium streetlight pc 390.00 E K 282

with prismatic glass bowl diffuser c/w 70W

150W HPS gear, lamp (IP54)

K 258 NA "PHILIPS" Cat No. SRC501 or No. 208.55 E K 145

SGS 201/070G

K 259 NA "SIEMENS" SRL S70 No. 239.60 E K 146

K 260 "SIEMENS" Cat No. 5NA3322-OS No. 212.40 E K 147

K 261 "THORN" Cat No. QB 79 WNB 1070 No. 184.30 E K 148

K 262 "INDALUX" 125-IVA-P No. 258.00 E K 149


SOR Page 91


K 263 "INDALUX" VIENTO 150-IVH c/w 70W/ No. 619.00 E K 150

150W SON lamp

K 264 "INDALUX" VIENTO 150-IVH with arm No. 864.00 E K 151

bracket c/w 70W/150W SON lamp


complete with 80W to 125W metal halide

lamp and integral compensated control

gear (Removal of existing lantern to be

measured separateyl) :- *(265 267)

K 265 NA "PHILIPS" Cat No. HGS 201 or No. 171.70 E K 152

HRC 510/080-125G

K 266 "SIEMENS" Cat No. 5NA3322-1D No. 212.40 E K 153

K 267 "THORN" Cat No. QB79WB1125 No. 201.80 E K 154


complete with 150W high pressure sodium

lamp and integral compensated control

gear (Removal of existing lantern to

be measured separately) :- *(268 277)

K 268 NA "EYE" Cat No. S4/9 No. 548.00 E K 155

K 269 "HUBBELL" Cat No. RMA-3-3/RMD- No. 326.90 E K 156

15S2E-3

K 270 Eyelide s419 die cast aluminium streetlight pc 685.00 E K 281

with thermal resistant glass bowl, high

purity aluminium reflector and built-in 150W

HPS gear, lamp (IP66) pole-top and arm

mounting

K 271 MA "PHILIPS" Cat No. SRC 821/150 or No. 252.20 E K 157

SGS 203/201/150


SOR Page 92


K 272 "SIEMENS" MRL 6150 THORN QA8 No. 295.00 E K 158

HNB 1150T

K 273 "SIEMENS" Cat No. 5NA 3332-1S/ No. 368.60 E K 159

5NA333-A/MRL 6150

K 274 "INDALUX" 125-IVA-P No. 365.00 E K 160

K 275 "Ingo" SL25 street lamp post with lantern in No. 850.00 E K 278


and silver aluminium reflector, 1 X 70W/

150W high pressure sodium lamp and

integral control gear with decorative

Spin single arm bracket






Ralo single arm bracket






single arm bracket

REPLACEMENT OF DEFECTIVE

STREET/GARDEN LIGHT COVER BOWLS

* Remove existing defective streetlight

cover bowl, supply and fix new cover bowl

including all accessories for the following

lighting lantern:- *(278 291)

K 278 NA "PHILIPS" Cat No. SRC 821-070G No. 59.30 E K 161


SOR Page 93


K 279 "THORNS" Cat No. QB 79 WNB 1070 No. 59.95 E K 162

K 280 NA "PHILIPS" Cat No. HGS 201/080-125G or No. 59.30 E K 165

HRC 821/125

K 281 "THORN" Cat No. QB 79 WB 1125 No. 59.95 E K 166

K 282 NA "PHILIPS" Cat No. SGS 203/150G or No. 69.80 E K 168

SRC 821/150

K 283 "FABRIKANT" post top 400mm dia No. 170.70 E K 169

polycarbonate opal white sphere

K 284 NA "WE-EF" SK409 post top 400mm dia No. 140.00 E K 170

polyethylene opal white sphere

K 285 NA "WE-EF" post top 400mm dia No. 170.00 E K 171

polycarbonate clear/frosted/opal white

sphere

K 286 NA "WE-EF" SK post top 450mm dia No. 130.00 E K 172

polyethylene opal white/frosted sphere

K 287 NA "WE-EF" post top 450mm dia No. 180.00 E K 173

polycarbonate opal white/frosted/clear

sphere

K 288 NA 400 mm diameter post-top polycarbonate No. 140.00 E K 174

opal white sphere (other than Fabrikant

& WE-EF)

K 289 NA 400 mm diameter post top polycarbonate No. 152.30 E K 175

clear/smoke sphere (other than fabrikant

and WE-EF)

K 290 NA Post top yellow globe 300mm diameter for No. 160.00 E K 176

zebra crossing

K 291 NA Post top yellow globe 300mm diameter c/w No. 483.00 E K 186

wall bracket, control gear and 100W bulb

LANTERN'S PART/ACCESSORY

K 292 NA Metal base for post top spheric lantern No. 41.00 E K 177

with mounting screws and connections

K 293 NA "WE-EF" die-cast aluminium alloy base, No. 160.00 E K 178

heat shield, 70W SON control gear and

lamp

K 294 NA "FABRIKANT" die cast aluminium alloy No. 179.45 E K 179

base, heat shield, control gear and lamp


SOR Page 94


K 295 NA Timer relay for zebra crossing warning light No. 172.50 E K 187

K 296 NA 3E Diffuser for lampost not exceeding 6m No. 136.85 E K 188

height

* The following parts/accessories are

for 'I-SUPREME' lantern *(297 299)

K 297 NA Top aluminium canopy with mounting knob No. 90.00 E K 180

K 298 NA Conical prismatic diffuser No. 137.00 E K 181

K 299 NA Die cast aluminium base No. 63.00 E K 182

K 300 NA Internal reflector and gear tray Set 42.00 E K 183

K 301 NA Intenal supporting brackets & rods Set 35.00 E K 184

L. LIGHTING COLUMN

REMOVAL OF EXISTING LIGHTING

COLUMN

L 001 NA Remove existing lighting column No. 57.20 E L 1

exceeding 5m height but not exceeding

10m height including bracket, arm and

lantern and dispose off site

L 002 NA Remove existing lighting column up to No. 36.20 E L 2

5m height including bracket,

arm and lantern and dispose off site

TUBULAR SWAGED LIGHTING COLUMN

* Supply, deliver to site and erect tubular

swaged lighting column hot-dipped

galvanised lighting column (planted type

with bitumen or coal tar epoxy coating

internally and externally up to 250mm

above ground) or flange mounted

(include foundation, stainless steel

bolts and nuts) complete with door cover,

10 Amp MCB, accessories, cable gland,

shroud, lock, information plate, internal

wiring, including necessary concrete

foundation, excavation, backfilling,

reinstatement of ground and painting

identification numbers as detailed in

Standard Drawing

Nos. EM-TC-STD-ELECT-03-TB01 to TB05

(Removal of existing lighting columns

to be measured separately) *(003 033)

L 003 NA 3 meter height post top No. 239.60 E L 3


SOR Page 95


L 004 NA 3.5 m height post top No. 267.60 E L 4

L 005 NA 4 m height post top No. 295.60 E L 5

L 006 4.5 m height post top No. 323.50 E L 6





L 011 NA 6 m height lighting column including No. 390.00 E L 11

2 m galvanised steel single arm bracket


2 m galvanised steel double arm bracket





L 015 NA 3 m height post top lighting No. 279.00 E L 15

column in powder coat finish

L 016 NA 3.5 m height pot top lighting column in No. 307.60 E L 16

powder coat finish

L 017 NA 4 m height pot top lighting column in No. 335.60 E L 17

powder coat finish

L 018 NA 4.5 m height pot top lighting column in No. 363.50 E L 18

powder coat finish

L 019 NA 5 m height pot top lighting column in No. 391.50 E L 19

powder coat finish

L 020 NA 6 m height post top lighting column No. 419.50 E L 20

in powder coated finish

L 021 NA 8 m height post-top lighting column No. 509.50 E L 21

in powder coated finish

L 022 NA 4 m height lighting column including 1.5 m No. 305.00 E L 22

to 2 m galvanised steel single arm bracket

all in powder coated finish

L 023 NA 4.5 m height lighting column including No. 345.00 E L 23

1.5 m to 2 m galvanised steel single

arm bracket all in powder coat finish


SOR Page 96



1.5 m to 2 m galvanised steel single



2m galvanised steel single arm bracket

all in powder coat finish


2m galvanised steel single arm

bracket all in powder coat finish


2m galvanished steel double arm



2m galvanished steel double arm


L 029 NA 4 m height lighting column with No. 305.00 E L 29

galvanised steel double quarter arm

bracket in powder coated finish

L 030 NA 4.5 m height lighting column with 1.5 m No. 345.00 E L 30

to 2 m galvanised steel double quarter


L 031 NA 5 m height lighting column with 1.5 m No. 390.00 E L 31



L 032 NA 6 m height lighting column with 1.5 m No. 430.00 E L 32



L 033 NA 6 m including 1 metre 60 dia. inclination No. 430.00 E L 33

slanted arm in powder coated finish

BRACKET AND PARTS (FOR TUBULAR

AND OCTAGONAL SECTION LIGHTING

COLUMN)

L 034 NA Hot dip galvanised steel single arm No. 95.10 E L 34

bracket to lighting column including powder

coated finish where necessary to match

existing

L 035 NA Hot dip galvanised steel double arm No. 130.00 E L 35

bracket to lighting column including powder

coated finish where necessary to match

existing

L 036 NA 80mm diameter 200mm length steel No. 29.80 E L 36

adaptor with spigot to lighting column for

mounting of post top lantern


SOR Page 97


L 037 NA Supply and fix hot dip galvanised metal No. 24.00 E L 37

door with locking facilities to match

existing lighting column

L 038 NA "PGL" Cat No. P/BM-448 Corrosion No. 103.20 E L 38

resistant aluminium wall bracket

L 039 NA 600mm long (max) hot dip galvanised No. 35.00 E L 39

steel single banner holder with hot dip

galvanised steel ring clamp bracket

L 040 NA 600mm long (max) hot dip galvanised No. 50.00 E L 40

steel double banner holder bracket with

hot dip galvanised steel ring clamp

bracket

L 041 NA "PGL" Cat No. P/T-2 Corrosion resistant No. 263.80 E L 41

aluminium double arm bracket for post top

mounting

L 042 NA "PGL" Cat No. P/T-3 Corrosion resistant No. 308.50 E L 42

aluminium tripple arm bracket for post top

mounting

L 043 NA "WE-EF" A 50-400.60 corrosion resistant No. 225.00 E L 43

aluminium wall bracket

L 044 NA "WE-EF" AS 20-400 corrosion resistant No. 370.00 E L 44

aluminium double arm bracket for post

top mounting

L 045 NA "WE-EF" AS 30-400 corrosion resistant No. 578.00 E L 45

aluminium triple arm bracket for post

top mounting

TAPERED OCTAGONAL SECTION

LIGHTING COLUMN

* Supply, deliver to site and erect LTA

approved tappered octagonal section

lighting column column (planted type

with bitumen or coal tar epoxy coating

internally and externally up to 250mm

above ground) or flange mounted (include

foundation stainless steel bolt and nuts)

10 Amp MCB, cable gland, shroud,locks,

information plate, internal wiring,

concrete foundation, planting

identification number, all necessary

excavation backfilling and reinstatement of

ground surfaces. (Removal of existing

lighting column to be measured




SOR Page 98


L 047 NA 3.5 m height post top lighting column No. 300.00 E L 47


L 049 NA 4.5 m height post top lighting column No. 384.00 E L 49













REMOVAL AND REPOSITION OF

EXISTING LIGHTING COLUMN

(INCLUDING BRACKET ARM AND

LANTERN)

* Remove existing lighting column from

existing postion, including excavation,

termination of cables, taking off of pole,

lantern, bracket, concrete footing,

backfilling, reinstatement of ground

surfaces, transportation to new position,

re-erect and install the lighting column at

new location including excavation new

concrete footing, backfilling, reinstatement

and connection for the following lighting

column *(058 060)

L 058 NA Not exceeding 5m high No. 91.70 E L 58

L 059 NA More than 5m hight but not exceeding 8m No. 121.00 E L 59

high

L 060 NA More than 8m but not exceeding 12m No. 185.20 E L 60


SOR Page 99


* Remove existing lighting column including

excavation, termination of cables,

taking off of poles, lantern, bracket,

concrete footing, backfilling, reinstate

ground, transportation, disposal of surplus

earth, debris, lighting column lantern,

bracket from site for the following height

(without replacing new lamp

post) *(061 063)

L 061 NA Not exceeding 6m high No. 70.50 E L 61

L 062 NA More than 6m high but not exceeding 8m No. 89.50 E L 62


PAINTING OF LIGHTING COLUMN

Colour of paint to be determined by the

Superintending Officer)

* Prepare surface and paint one coat

approved aluminium paint to existing

lighting column including spray painting

column's indicator for the following lighting

columns *(064 067)

L 064 NA Not exceeding 5m height post top lighting No. 7.00 E L 64

column


height post top lighting column

L 066 NA 6m to 10m height street lighting column No. 11.80 E L 66

with single arm bracket

L 067 NA 6m to 10m height and above street lighting No. 12.85 E L 67

column with double arm bracket

* Prepare surface and paint two coats of

approved aluminium paint or one coat of

primer with 2 coats of synthetic enamel

paint to existing lighting column including

spray painting columns indicator for the

the following lighting columns : *(068 071)

L 068 NA Not exceeding 5m height post top lighting No. 9.50 E L 68

column


height post top lighting column

L 070 NA 6m to 12m height lighting column with No. 14.80 E L 70

single arm bracket

L 071 NA 6m to 12m height lighting column with No. 15.85 E L 71

double arm bracket


SOR Page 100


L 072 NA Paint identification numbers (Block No./ Pole 3.50 E L 72

Switch Room No./Lamp Pole No.) with

lettering / numbering height not

exceeding 100mm height onto existing

lighting column

IMPROVEMENT TO LIGHTING

COLUMN'S BASE

L 073 NA Excavate ground section of lighting No. 18.00 E L 73

column (3 - 10m height) up to top surface

of concrete footing, treat ground section

of lighting column with approved primer

and coat surface of column from top

of concrete footing up to 300mm above

ground level with approved bituminous

coating including necessary propping,

backfilling and reinstatement works

L 074 NA Excavate base of lighting column No. 6.40 E L 74

(3 - 10m height) up to 200mm below

ground, treat exposed ground section

with approved primer and coat surface

of column from 200mm below ground

to 300mm above ground level with

approved bituminous coating including

necessary propping, backfilling and

reinstatement works

* Additional strengthening of lighting

column's base (for new lighting column

only) by grouting with non-shrink pre-

packed cement mortar as specified and

shown in drawing no. EM-TC-STD-ELEC-

03-13 for lamp post of the following

height *(075 076)

L 075 NA Not exceeding 6m height Pole 30.50 E L 75

L 076 NA Above 6m to 10m height Pole 35.00 E L 76

M. BOLLARD LIGHTING

REMOVAL OF EXISTING BOLLARD

M 001 NA Removal of existing bollards light to No 12.60 E M 1

facilitate replacement of new bollards

including reinstatement and disposal off

site

M 002 NA Grade 25 mass concrete footing not No 14.65 E M 2

exceeding 0.1m3 for bollards including

excavation, backfilling and reinstatement

M 003 NA Removal of existing bollard light including No 13.40 E M 3

removal of concrete base, reinstatement,

backfilling and disposal of off site

(without replacement of new bollard)


SOR Page 101


BOLLARD LIGHTING

* Supply, deliver to site and install the

following Bollard lights with integral

control gear, internal wiring, cable gland,

shrouds, mounting brackets, screws,

connectors and other accessories including

necessary concrete foundation, excavation,

backfilling, reinstatement of ground and

painting identification numbers

(Removal of existing bollard to be


M 004 "ARCLUSE" ECO 8124-12 with 70W No. 357.00 E M 4

SON or 80W mercury lamp

M 005 "BOLUCE ARES" 2000 1100mm high No. 320.00 E M 5

bollard with 18W PLC lamp

M 006 "ELENCO" with 23W EL lamp No. 680.50 E M 6

M 007 "FABRIKANT" 2048 in corrosion resistant No 637.00 E M 7

die-cast aluminium alloy body, tempered

alloy body with tempered glass diffuser,

anodised high purity reflector and

70 watts metal halide lamp or 70W

CDM coolwhite or 60W/65W spiral compact

fluorescent lamp

M 008 "FABRIKANT" 2008 in corrosion resistant No 640.00 E M 8

die-cast aluminium alloy body with louvres,

aluminium post and 70 watts metal lamp

or 70W CDM coolwhite or 60W/65W



SOR Page 102


M 009 "FUMAGLLI" OFIR3 with antique reeded No. 718.80 E M 9

pole moulded with resin and reinforced

with steel and 3 x 20W EL lamp

M 010 "FUMAGLLI" OFIR2 with antique reeded No. 603.30 E M 10

pole moulded with resin and reinforced with

steel and 2 x 20W EL lamp

M 011 NA "IGUZZINI" PART 7293 with 18W PLC No 688.70 E M 11

lamp

M 012 NA "MARCIO" 2000 110mm high bollard No. 426.00 E M 13

luminaire with 50W metal halide lamp,

die-cast aluminium housing, lourve

guards and sand blasted diffuser

M 013 NA "MIRAGE" P1200 with die-cast aluminium No. 680.00 E M 14

body, louver, gear tray and 42W compact

fluorescent lamp/70W metal halide lamp/

70W SON sodium lamp

M 014 NA "PHILIPS" cat no. HGC 130 with opal-white No 338.00 E M 16

cube and vandal-resistant glass-fibre

reinforced polyester column with 80W

HPL-N lamp/70W SON lamp

M 015 NA "PHILIPS" cat no. HGC 131 with clear No 413.00 E M 17

cube, built-in white lacquered aluminium

louvre system and vandal-resistant

glass-fibre reinforced polyester column

with 80 - 125W HPL-N lamp/70W SON

lamp

M 016 Royal Botania Rectan bollard c/w 1x7- No 565.00 E M 35

11W compact fluorescent lamp. Body is

made of superior natural materials :

premium Javanese plantation teak,

stainless steel, granite (IP55)

M 017 Royal Botania Ellipse bollard c/w 1x7- No. 498.00 E M 36



premium Javanese plantation teak,

stainless steel, granite (IP55)


SOR Page 103


M 018 Royal Botania Neptune bollard c/w 3x7- No. 830.00 E M 37

11W compact fluorescent lamps. Body

is made of superior natural material :

stainless steel (IP55)

M 019 Royal Botania Luce-Fer bollard c/w 1x7- No. 485.00 E M 38



zinc alloy, cast solid brass (IP55)

M 020 NA "SELUX" LICOL 600mm ht cat no. No 861.40 E M 18

SX 702-11-2 with 80W HPL-N lamp


SX 702-14/ 15-2 with 80W HPL-N 50 -

70W SON lamp

M 022 NA "SELUX" LICOL 1000mm ht louvred head No 901.10 E M 20

cat no. SX 700-19-2 with 50 - 70W SON/

80W HPL-N

M 023 NA "SELUX" LICOL 600mm ht louvred head No 857.50 E M 21

cat no. SX 700-14-2 with 50W/70W SON

lamp


SX 703-13-2 with 80W mercury lamp

M 025 NA "THORN" AVENUE B with 70W SON lamp No 867.20 E M 23

M 026 "WE-EF" GTY 254-E-70/NI [K] in corrosion No 760.00 E M 24


with louvres, aluminium post, and 70 watts

metal halide or 70W CDM coolwhite or

60W/65W spiral compact fluorescent lamp

M 027 "WE-EF" CRY or CTY 150-E-70/NI [K] in No 720.00 E M 25


alloy body with UV stabilized and vandal

resistant Polycarbonate diffuser, anodized

high purity reflector and 70 watts




SOR Page 104


M 028 "WE-EF" GLC 150-E-70/NI [K] in corrosion No 703.25 E M 26

resistant die-cast aluminium alloy body,

with UV stabilized and vandal resistant

Polycarbonate diffuser, anodized high

purity reflector and 70 watts



M 029 "WE-EF" VSI 254-E-50/NI [K] in corrosion No 765.00 E M 27


with one-sided light output with 70 waltts



M 030 "WE-EF" OSS 254-T-50/NE [K] in No 820.00 E M 28


alloy body with one sided light output with

and 50 - 70 watts



M 031 "WE-EF" DSS 259-E-50/NI [K] in corrosion No 785.00 E M 29


with one sided light output with 50 - 70

watts metal halide or 70W CDM coolwhite

or 60W/65W spiral compact fluorescent

lamp

M 032 "WE-EF" OSV 204-E-50/NI [K] in corrosion No 550.00 E M 30


with one sided light output with 50 - 70



lamp


SOR Page 105


M 033 "WE-EF" DSG 259-E-50/NI [K] in corrosion No 788.00 E M 31


with one sided light output with 50 -70



lamp

M 034 "WE-EF" FTY-150-E-70/NI [K] in corrosion No. 825.00 E M 32


with UV stabilized and vandal resistant

Polycarbonate diffuser, anodized high

purity aluminium reflector and 70 watts

metal halide or 70W CDM coolwhite


lamp

M 035 3E VIGILE PG121 No. 1 decorative bollard No. 980.00 E M 34

luminaire with polycarbonate shock-

resistant diffuser, and 70W metal halide

or 70W CDM coolwhite


lamp


SOR Page 106


N. FLOODLIGHT/SPOTLIGHT/

STEPLIGHT/BURIED LIGHT

REMOVAL OF EXISTING FLOODLIGHT /

SPOTLIGHT

N 001 NA Remove existing floodlight/spotlgiht/ No. 9.80 E N 1

steplight/buried ligh fittings and dispose

of site

N 002 NA Remove existing steplight/buried light No. 18.00 E N 2

fittings including proper termination,

disposal of site and reinstatement of

ground/floor finish

FLOODLIGHT/SPOTLIGHT/STEPLIGHT/

BURIED LIGHT

* Supply, delivery to site and install the

following floodlight/spotlight/steplight/buried

ligt complete with integral control gear

including connecting wiring, mounting,

brackets, screws, connections

and other accessories (Removal of existing

floodlight/spotlight/steplight/buried light/

fittings to be measured separately)

*(N003 N092)

N 003 Arcluce ARES 8153 1x250/400 floodlight No. 773.49 E N 90

c/w die cast aluminium body, temper glass


or 400W halide lamp IP66

N 004 Arcluce 8941 Powder painted anti-glare No. 110.00 E N 99

steel louvre for Arcluce Ares Floodlight

N 005 Arcluce 8922 Powder painted anti-glare No. 70.00 E N 100

steel louvre for Arcluce Ares Floodlight

N 006 Arcluce Apollo 8175 1x250/400 floodlight No. 580.00 E N 101

c/w die cast aluminium body, temper glass


or 400W halide lamp IP65


SOR Page 107


N 007 Arcluce Mix 3435 1x70W /150W direct / No. 750.00 E N 102

indirect floodlight c/w die cast aluminium

body, temper glass diffuser, intergal

control gear and metal halide lamp IP66

N 008 "ARCLUCE" ECO 8137 slimline floodlight No. 322.00 E N 3

(IP55), black die cast aluminium housing

with cooling fins and 70W SON or 70W

metal halide lamp

N 009 NA "BERGER & WEISER" model no. 5203 No. 46.10 E N 4

ourdoor corrosion resistant spotlight with

Par 38 cool beam 100W lamp and ground

spike

N 010 "BLAUET" 1910 recessed steplight in die No. 140.00 E N 5

cast aluminium with lourve translucent

polycarbonate diffuser with 11W PL lamp

N 011 NA "CING" CASTALDI D16/ECO steplight with No. 151.10 E N 6

9W PL/18W PLC/26W PLC lamp and high

stress resistant composite technopolymer

body

N 012 "DAIKO" DOD 75571 wall mounted spot No. 920.00 E N 7

luminaire with 150W HQI lamp and anti-

glare shield

N 013 NA DEDALO 71561 recessed uplight in No. 580.00 E N 91

stainless steel with adjustable reflector c/w

26W lamp, conventional ballast and all

accessories (Natural Aluminium)

N 014 ECTO EC-ISH 101A Wall mounted No. 195.00 E N 92

adjustable floodlight luminaire in die-cast

aluminium housing with tempered glass

diffuser and wide flood reflector c/w 70W

metal halide warm daylight lamp, integral

control gear and all accessories (Black)


SOR Page 108


N 015 ECTO PHOENIX 77340 recessed uplight No. 480.00 E N 93

(IP67) in aluminium with aluminium disk c/w

10W warmwhite lamp, integral ballast and

all necessary (Natural Aluminium)+D1411

N 016 EURO SPI 150 adjustable floodlight in die- No. 690.00 E N 94

cast aluminium with 10 degree aluminium

reflector and safety tempered glass diffuser

c/w 150W metal halide warm daylight lamp,

integral control gear and all accessories

(Grey)

N 017 NA "EUROTEC" LUMEC/BOXER 1 x 250W No. 485.00 E N 9

metal halide bi-emission wall mounted

floodlight, die-cast aluminium body,

safety tempered glass with up/down

asymmetrical optical system, IP66

N 018 NA "EUROTEC" RUDD DFPAR20S 1 x No. 385.00 E N 10

35W PAR20 MH 300K floodlight with

inground control gear, hexcell glare

louver, die-cast aluminium in black zinc

coated stainless steel external hardware

and tempered glass lens, IP67

N 019 "EXTERIEUR VERT" M2 IP67 buried light, No. 386.10 E N 11

in 18 microns anodized aluminium housing

with mechanical resistance glass of 8T

or anti vandal polycarbonate 4T), FM 11W

lamp, electronic control gear

N 020 "EYELITE" WALLUX MAXI SMS-7277 No. 425.00 E N 8

heavy duty die cast aluminium luminaire

with prismatic borosilicate glass diffuser

and 70 to 150W SON or metal halide lamp

N 021 "FABRIKANT" 3026/3023/3028/3029/3024 No. 760.00 E N 12

floodlight of corrosion resistant

die-cast aluminium alloy body with

cooling fins, hinged and framed

safety glass thermal shock resistant,

stainless steel locking devices,

weatherproof and non-aging silicon

rubber gasket with RF 1-76/M/16 spigot

cap and 150/250/400 watts tubular/metal

halide lamp

N 022 "HUBBELL" MAGNULITER floodlight No. 520.30 E N 13

Cat No. MVM-0250S-116 with 250W

SON lamp and 4024C mounting bracket


SOR Page 109


N 023 "HUBBELL" MINILITER floodlight Cat No. No. 382.30 E N 14

MHS-0070S-166 for 240V operation with

70W SON lamp and 4024C mounting

bracket

N 024 NA "IGUZZINI" PLATEA 7377 outdoor floodlight No. 642.10 E N 15

in die-cast aluminium, super pure

aluminium reflector with asymmetrical

beam and 70W metal halide or high

pressure sodium lamp




beam and 150W metal halide or high





beam and 250W metal halide lamp



aluminium reflector with flood beam

and 70W metal halide or 80W - 125W high





and 150W metal halide or high pressure

sodium lamp




and 250W metal halide lamp

N 030 NA "IGUZZINI" 182 diameter Uplighter Light No. 602.40 E N 21

Up Walk with 13W PLC lamp and die cast

aluminium frame

N 031 NA "IGUZZINI" 7188/7189 diameter Uplighter No. 717.80 E N 22

Light Up Walk with 50/80W mercury super

deluxe lamp respectively and die cast

aluminium frame

N 032 NA "IGUZZINI" 7180 diameter Uplighter Light No. 893.40 E N 23

Up Walk with 50W white SON lamp and

die cast aluminium frame


Light Up Walk with 35/70W metal halide

lamp and die cast aluminium frame


SOR Page 110



Light Up Walk with 50/70W SON lamp and

die cast aluminium frame


in die cast aluminium super pure aluminium

reflector with flood beam and 70W metal

halide E27 lamp



reflector with flood beam and 80W metal

halide lamp



reflector with flood beam and 50W SON or

metal halide lamp



reflector with flood beam and 2 x 26W TCT




reflector with spot beam and 70W metal

halide lamp



reflector with spot beam and 150W metal

halide lamp



reflector with blade-of-light beam and 70W

metal halide lamp



reflector with blade-of-light beam and 150W

metal halide lamp

N 043 INCASSO recessed steplight in die-cast No. 108.00 E N 95

aluminium with anti-glare louvre c/w PLC

18W warmwhite lamp and ballast (Black)

N 044 "INDALUX" 250-IQN security floodlight No. 463.00 E N 34

with die-cast aluminium housing,

borosilicate glass diffuser and 70W SON,

70W metal halide lamp or 70W CDM

coolwhite or 60W/65W spiral compact

fluorescent lamp


SOR Page 111


N 045 "INDALUX 600-IZX-C/S/D/A floodlight with No. 811.00 E N 35

150W/250W/400W SON lamp/or

150W/25W/400W metal halide lamp

N 046 NA "JETS 5" 84.09.01 outdoor flooding with No. 480.00 E N 38


N 047 KRIS LORALUX IZX-A adjustable floodlight No. 480.00 E N 96

in die cast aluminium housing with

tempered glass diffuser c/w 250W metal

halide daylight lamp, mounting bracket,

integral control gear and all accessories

mounted on 8m lighting column (Black)

N 048 KRISTAL OPTIC 500 floor set consists of 1 No. 3,500.00 E N 97

no. of IP44 wall mounted projector with

hardness c/w 500 tails of endlight

N 049 "LIGMAN" 50031 spike mounted spotlight No. 139.00 E N 39

with 80W PAR 38 lamp

N 050 Liedo OD-8272 1 x 70W/150W MH No. 520.00 E N 103

floodlight c/w die-cast aluminium and

stora-enamelled. The front cover when

opened remains suspended by a chain

IP65

N 051 NA "MARCIO" (1091) recessed step-light No. 242.00 E N 40

luminaire with 2 x 9W PL lamps, pressured

aluminium housing & guard, tempered

glass diffuser and recess box

N 052 NA "MARCIO" (4440) buried uplighter luminaire No. 982.00 E N 41

wtih 70W metal halide lamp, die-cast

aluminium housing, reflector, polyproplyene

recess-tube and toughened glass diffuser

N 053 NA "MARCIO" (4316) floodlight luminaire with No. 574.00 E N 42

70W metal halide lamp, die-cast

aluminium housing, reflector and 70W

metal halide lamp

N 054 NA "MARCIO" (4819) ground-mounted No. 642.00 E N 43

recessed luminaire with die-cast aluminium

housing, 12 windows protective guard,

thoughened glass diffuser, polypropylene

recess tube and 18W PLC lamp


SOR Page 112


N 055 NA "MEYER" WM 8872-041-000 Floodlight No. 642.00 E N 46

with thermal fatigue resistant safety glass,

high gloss mirror reflector, die-cast

aluminium body & 150W metal halide lamp

N 056 NA "PHILIPS" floodlight Cat No. SWF 330 with No. 560.00 E N 47

250W/400W SON/T lamp and mounting

bracket

N 057 NA "PHILIPS" anti glare weatherproof No. 411.30 E N 48

floodlight Cat No. SNF 300 with 250W

SON/T lamp

N 058 NA "PHILIPS" anti glare weatherproof No. 499.55 E N 49

floodlight Cat No. SWF 330/SEF 330 with

250W SON/T or 400W HDL/T lamp

N 059 NA "PHILIPS" bulk head luminaire Cat No. No. 163.90 E N 50

XGC001 with prismatic diffuser, 18W SOX

lamp and mounting bracket

N 060 "SIEMENS" EUROFLOOD 701150 No. 544.20 E N 51

SICOMPACT mini floodlight with 70/150W

metal halide or high pressure sodium lamp

N 061 "SIEMENS" EUROFLOOD 250/400 No. 636.30 E N 52

SICOMPACT mini floodlight with

250/400W metal halide or high pressure

sodium lamp

N 062 "SIEMENS" SICOMPACT MINI floodlight No. 336.60 E N 53

cat. no. 5NA-747-1-2 of die-cast aluminium

housing, hammered aluminium reflector

and tempered glass lens with 70W metal

halide lamp

N 063 "SIEMENS" SICOMPACT MINI floodlight No. 351.10 E N 54

cat. no. 5NA-747-2-2 of die-cast aluminium

housing, hammered aluminium reflector

and tempered glass lens with 150W metal

halide lamp

N 064 NA "SELUX" MTR luminaire Cat No. SX 563 No. 939.90 E N 55

11-2 with 70W SON lamp, MTR 200

reflector and accessories

N 065 NA "SIMES" Art S4929 ring buried/walk over No. 375.00 E N 56

light fitting with acidated glass, die

cast aluminium body and 18W PLC-T

lamp


SOR Page 113


N 066 NA "SIMES" Ring Drive/walk over Art S.4928/ No. 474.00 E N 57

4930 with thoughened clear glass

diffuser polypropylene tube for recess,

IP67 and 18W PLC-T lamp

N 067 NA "SIMES" MEGAFLAT round buried No. 704.00 E N 58

drive/walk over Art. S.4787 uplight with

70W SON or 125W metal halide lamp,

polyester powder coated cast aluminium

housing and toughened glass

N 068 NA "SIMES" MAGAFLAT round buried drive/ No. 912.00 E N 59

walk over Art. S.4790 uplight with clear

thoughened glass diffuser, polypropylene

tube for recess, IP67 and MH 150W metal

halide lamp

N 069 NA "SIMES" MEGAFLAT round buried drive/ No. 955.00 E N 60

walk over Art S.4726/4728 uplight with

1 x MH-150W/125W/70W metal halide

lamp, clear toughened clear glass diffuser,

polypropylene tube for rescess, IP67

N 070 NA "SIMES" PRADO buried drive-over with No. 188.00 E N 61

compact fluorescent lamp 10W G24d-1 die

cast aluminium body 4 windows protective

guard of 6mm thickness polypropylene

tube and polypropylene vandal proof diffuser

N 071 NA "SOLARIS" uplighter with energy saving No. 173.60 E N 62

bulb EL 20

N 072 NA "SPECTRA" SORRENTO STO No. 161.00 E N 63

S14560/S14575/ S14590 srecessed

steplight with high impact opal acrylic

lens and 18W PLC lamp

N 073 NA "SPECTRA" TRENTO S13110/S13112/ No. 928.00 E N 64

S13104/S13106/S13120/S13200/S13705/

S13210 Uplighter with high strength

borosilicate glass 70W/100W/150W metal

halide lamp or 80W/125W mercury lamp

or 70W sodium lamp

N 074 DELETED E N 65


SOR Page 114


N 075 "THORLUX" AZMET 70 Floodlight with No. 420.00 E N 66


N 076 "THORLUX" COMBO Prismatic low glare No. 720.00 E N 67

refractor luminaire with 250W/400W

sodium or 250W/400W metal halide lamp

N 077 "THORLUX" AZMET 3 Floodlight (Spigot No. 695.00 E N 68

mounted or cradle mounted) with 250W/

400W sodium or 250W/400W metal halide

lamp

N 078 "THORLUX" ENCLOSED COMBO with No. 600.00 E N 69

hinged glass cover (IP54) and 250W/

400W sodium or 250W/400W metal halide

lamp

N 079 "THORN" OT 7OT SON-Pak 7 floodlight No. 308.50 E N 70

with 70W SON lamp

N 080 "THORN" JALON G 18W PLC recessed No. 126.10 E N 71

horizontal steplight with grille and 18W

PLC lamp

N 081 "THORN" CA5000 CITYSCAPE floodlight No. 655.70 E N 72



SOR Page 115


N 082 "THORN" ODW 500 halogen floodlight No. 159.00 E N 73

with K1 250W/500W linear tungsten

halogen lamp

N 083 "THORN" AFSS150T/250T or AFSK250T/ No. 371.00 E N 74

area floodlight 40 with 150W/250W SON

or metal halide lamp

N 084 "THORN" AFSS 400T/AFSK 400T/AFSC No. 394.00 E N 75

400T area floodlight 40 with 400W SON,

mercury or metal halide lamp

N 085 TRIANGLE 14380 decorative updown wall No. 85.00 E N 98

luminaire with doffuser c/w 1 x 80W

mercury super deluxe lamp for dowlight,

2 x PLL 18W lamp for uplight and all

accessories (Black)

N 086 "VINIC" 50403/50405 floodlight with die No. 502.00 E N 78

cast aluminium body, tempered glass

cover and metal halide/70W/150W high


N 087 "VINIC" 50601/50603/50602/50604 No. 740.00 E N 79

floodlight with die cast aluminium body,

tempered glass cover and 250 - 400W

SON/metal halide lamp

N 088 "WE-EF" FL31-T-1000/H Bi-Symmetrical No. 1,008.00 E N 80

Floodlight fitting of corrosion resistant

die-cast aluminium alloy body, hinged and

framed safety glass thermal shock

resistant, stainless steel locking devices,

weatherproof and non-aging silicon rubber

gasket. Anodized high purity aluminium

reflector, chemically brightened. Integral

control gear c/w 1000W metal halide lamp

N 089 "WE-EF" IP55 STG259-DD-13(I) or 18(I)/ No. 185.10 E N 81

STL 259-DD-13(I) or 18(I) corrosion

resistant steplight with die-cast aluminium

alloy body and frame, polycarbonate

UV-stabilized and vandal resistant diffuser,

two cable entires to facilitate through

wiring and 13W or 18W PLC lamp


SOR Page 116


N 090 "WE-EF" IP55 FL520-DT-18(B) accent No. 360.00 E N 82

floodlight corrosion resistant die-cast

aluminium alloy body and frame, finish

in RAL polyester powder coat, thermal

shock resistant safety glass,

weatherproof durable silicone rubber

gasket and 18W PLC lamp

N 091 NA "WE-EF" STO 259 step light with high No. 188.00 E N 83

impact opal acrylic lens, 13W/18W PLC

lamp

N 092 NA 150/200W spot light fitting No. 27.65 E N 84

with base holder to wall or ceiling

MOUNTING BRACKET

N 093 NA Mounting bracket for 'PHILIPS' SWF 330/ No. 38.15 E N 85

SEF 330 floodlight

N 094 NA "WE-EF" MF1-A-108 steel mounting No. 142.50 E N 86

bracket for single floodlight on post top

column

N 095 NA "WE-EF" MF2-A-108 steel mounting No. 257.00 E N 87

bracket for two floodlight on post top

column

N 096 NA Steel mounting bracket for single No. 85.50 E N 88

flood light luminaire on post top column

(other than WE-EF)

N 097 NA Steel mounting bracket for two No. 133.00 E N 89

flood light luminaire on post top column

(other than WE-EF)

N 098 "Tucano" RWS300 recessed mounted wall No. 225.00 E N 104

light in cast aluminium with anti-glare louvreand backcasing c/w PLC18W lamp

N 099 "Tucano" 51163 recessed mounted wall No. 100.00 E N 105


N 100 "Tucano" 51173 recessed mounted wall No. 125.00 E N 106


N 101 "Ingo" SBN617 surface mounted floodlight in No. 480.00 E N 107

cast aluminium with tempered glass diffuser and aluminium reflector c/w 400W metal halide lamp and control gear

N 102 "Tucano" 21228 surface mounted floodlight No. 225.00 E N 108

in cast aluminium with tempered glass diffuser and aluminium reflector c/w 70W/ 150W metal halide lamp and control gear


SOR Page 117


N 103 "CMC" Focus surface/ spike mounted uplight No. 580.00 E N 109

in cast aluminium with safety glass lens and

70W/ 150W metal halide lamp and control gear

N 104 "Tucano" MY464 floodlight in cast aluminim No. 350.00 E N 110

with clear tempered glass diffuser and 70W/ 150W metal hallide lamp and control gear





P. WEATHERPROOF BOX AND METAL

ENCLOSURE

P 001 NA "VYNCKIER" Superpolyrel SP 320 500 x No. 622.00 E P 1

750 x 300 mm with cover, rainhood, air

vents, handle, lock, keys and gasket for

IP55




IP55




IP55

P 004 NA 160 x 135 x 77 mm PVC rectangular box No. 16.10 E P 4

with cover "LEGRAND" Cat No. 92106 or

other approved

P 005 NA 310 x 240 x 154 mm PVC rectangular box No. 68.00 E P 5

with hinged cover, "LEGRAND" Cat. No.

35054 or other approved

P 006 NA 85mm x 85mm x 30mm PVC rectangular No. 9.60 E P 6

box with hinged cover, "LEGRAND" Cat

No. 35054 or other approved


SOR Page 118


P 007 NA Weatherproof pvc termination/connection No. 8.70 E P 7

box ("Legrand" or other approved)

P 008 NA Electro-galvanised steel metal enclosure No. 68.00 E P 8

for moulded case circuit breaker (MCCB)

with cover gasket and screw-in knobs or

hidden hinges with cam lock and 2 keys

P 009 NA Electro-galvanised steel metal enclosure/ No. 28.00 E P 9

box for minature circuit breaker (MCB)

with hidden hinges, cam lock and 2 keys

P 010 NA Metal box for 13/15 Amp socket outlet in No. 21.00 E P 10

powder coat finish with hidden hinges,

cam lock and 2 keys

P 011 Self-closing and locking metal box concealed No. 65.00 E P 11

door type for 13/15 Amp socket outlet in

powdercoat finish with hidden hinges,

push-on' lockset and 2 keys

P 012 NA Camlock to metal box enclosure with 2 No. 13.00 E P 12

keys

P 013 NA Push-on' lockset for self-closing and No. 24.00 E P 13

locking metal box complete with 2 keys

Q. LIGHTNING PROTECTION SYSTEM

LIGHTING CONDUCTOR TAPE

Q 001 NA 25mm x 3mm aluminium lighting m 6.00 E Q 1

conductor conductor tape with aluminium

clip and base properly secured onto wall

or roof with stainless steel screws (Furse,

Emtech, HS, Heng)

Q 002 NA 25mm x 3mm copper lighting conductor m 11.00 E Q 2

tape with brass/bronze clip and base

properly secured onto wall or roof with

stainless steel screws (Furse, Emtech,

HS, Heng)

Q 003 NA Inter connecting buried 25 x 3mm m 11.60 E Q 3

copper tape

AIR TERMINAL

Q 004 NA 16mm diameter x 300mm long taper- No. 6.10 E Q 4

pointed aluminium air terminal aluminium

air terminal base and stainless steel

screws (Furse, Emtech, HS, Heng, NSI)


SOR Page 119


Q 005 NA 16mm diameter x 300 mm long taper- No. 22.60 E Q 5

pointed aluminium air terminal with

leaded gunmetal air terminal base

(Furse, Emtech, HS, Heng, NSI)

BI-METALLIC CONNECTOR

Q 006 NA Bi-metallic aluminium-copper connector No. 27.20 E Q 6

for lightning conductor tapes

(Furse, BICC, Cembre, Rema, Heng, HS)

EARTH ROD

Q 007 1.8m long x 16mm diameter copper-weld No. 29.10 E Q 7

earth rod with steel core driven in ground

with bronze coupling including

testing and certification by licensed

electrical worker OF technician grade

(Furse, Emtech, Heng, HS, NSI)

Q 008 NA 3.6m long x 16mm diameter copper-weld No. 47.00 E Q 8

earth mild steel 3.6m long driven in ground,

with bronze coupling including

testing with certification by licensed

electrical worker of technician grade

(Furse, Emtech, Heng, HS, NSI)

Q 009 NA Electrical joint compound for earthing No. 12.00 E Q 9

rod cap

TAPE CLAMP

Q 010 Aluminium square tape clamp suitable for No. 4.20 E Q 10

25 x 3 mm conductor size

(Furse, Heng, HS, NSI)

Q 011 NA Leaded gunmetal square tape clamp No. 8.40 E Q 11

suitable for 25 x 3 mm conductor size


Q 012 Leaded gunmetal round test clamp No. 27.30 E Q 12


Q 013 Approved earth rod to tape 'A' type No. 11.60 E Q 13

earthing clamp with label (Heng, HS, NSI)

Q 014 Earth clip/clamp for water pipe/gas pipe No. 2.10 E Q 14

bonding diameter 12mm - 75mm with label

EARTH ELECTRODE INSPECTION PIT

Q 015 250 x 250 x 3 mm thick hot-dipped No. 20.80 E Q 15

galvanised hinged lid inspection pit

with plastic moulded pot

(Heng, HS, NSI, Sunlight)


SOR Page 120


Q 016 236 x 236 x 230mm polymer earth No. 29.10 E Q 16

electrode inspection pit

Q 017 NA 25mm to 50mm thick precast concrete No. 2.90 E Q 17

cover not exceeding 0.1m2 for earth

inspection pit

EXOTHERMIC WELD

Q 018 NA Exothermic welded joints for 20 x 3 mm No. 22.30 E Q 18

copper tapes - cable to steel surface

similar to Furse Type BS1 or BS2 or

Cadweld Type CW, or other approved

TESTING OF LIGHTING PROTECTION

SYSTEM

Q 019 NA Labour and equipment to conduct testing Block 38.00 E Q 19

including tracing fault in lightning

protection system, rectification of

defects where necessary (parts measured

seperately) and retesting where necessary

worker complete with certification by

licensed electrical worker of technician grade

upon completion of rectification works

(for Block having not more than

4 earthing points)

Q 020 NA Labour and equipment to conduct testing Block 54.00 E Q 20

including tracing fault in lightning

protection system, rectification of defects

where necessary (parts measured

separately) and retesting where necessary

upon completion of rectification works

complete with certification by licensed

electrical worker of technician grade

(for Block having more than

4 earthing points)

R LABOUR ONLY ITEM

* Labour only for carrying out the following

works including reinstatement transport,

equipment and establishment

charges *(001 042)

R 001 NA Replacing wiring for lamp holder including No. 3.90 E R 1

short length of wire

R 002 NA Checking defective wiring, fuse, time Job 17.80 E R 2

switch, etc in switchroom/distribution board

by skilled electrician including repair

where necessary (Parts measured

separately)

R 003 NA Checking defective lamp pole's Pole 11.30 E R 3

wiring, fuse, including tracing fault within

lamp pole and repair where necessary

R 004 NA Refixing loosen lamp cover/fitting for No. 5.70 E R 4

post top lantern

R 005 NA Dismantling single/double lamp post arm Pole 26.10 E R 5

bracket and dispose off site

R 006 NA Re-fixing single/double arm bracket to lamp Pole 26.10 E R 6

post


SOR Page 121


R 007 NA Repositioning single/double lamp post's Pole 26.10 E R 7

arm within the same lamp post

R 008 NA Replumbing verticality of lamp post not Pole 38.00 E R 8

exceeding 5m height including excavation,

casting new concrete footing (where

necessary) painting of approved bituminous

coating to surface of ground section of

column up to 150mm above ground level

and reinstate ground on completion

R 009 NA Replumbing verticality of lamp post Pole 62.00 E R 9

exceeding 5m but not exceeding 8m height

including excavation, casting of new

concrete footing (where necessary) painting

of approved bituminous coating to surface

of ground section of column up to 300mm

above ground level and reinstate ground on

completion

R 010 NA Replumbing verticality of lamp post Pole 70.00 E R 10

exceeding 8m but not exceeding 12m

height including excavation, casting new

concrete footing (where necessary)

painting of approved bituminous coating to

surface of ground section of column up to

300mm above ground level and reinstate

ground on completion

R 011 NA Tracing underground cable fault Job 33.90 E R 11

between two lamp poles or lamp pole and

switchroom for series of lamp posts in

circuit (repair and parts measured

seperately)

R 012 NA Checking fitness of carpark lighting lantern No. 8.90 E R 12

including dismantling lantern,

replacing parts where necessary (parts

measured separately) cleaning lantern and

diffuser and refixing on completion

R 013 NA Refixing loose and fallen m 0.90 E R 13

teak battens for wiring and resecure wiring

R 014 NA Refixing loose and fallen m 0.90 E R 14

wiring/PVC trunking including supply of

additional clips where necessary

R 015 NA Refixing loose or fallen ceiling rose No. 1.00 E R 15

including the replacement of wood

plugs where necessary

R 016 NA Refixing meter/distribution No. 9.70 E R 16

board including the replacement of

wood plugs where necessary

R 017 NA Refixing loose electrical No. 2.80 E R 17

fittings and accessories including the

replacement of wood plugs where

necessary


SOR Page 122


R 018 NA Removing existing ceiling rose and No. 4.25 E R 18

connecting short length of cable from

existing lighting point directly into

the existing light fittings inclusive of

short length of cable, trunking/conduit

and connector

R 019 NA Refixing loose 20mm/25mm diameter Job 4.40 E R 19

galvanised steel/pvc conduit pipes

including new clip, saddle clamps and

screws

R 020 NA Checking and tightening the loose Job 17.50 E R 20

cable connection for fuses, MCCB's and

busbars in the main switchboard

R 021 NA Checking and repairing No. 26.20 E R 21

defective light in community hall, market,

hawker centre other parts of building

exceeding 8m height including use of

mobile metal stagings (parts and

fittings measured separately)

R 022 NA Extra over item 021 for checking and No. 6.30 E R 22

repairing additional defective light within

the same building including shifting of

mobile metal stagings (parts and fittings


R 023 NA Tracing fault in entire circuit of public No. 10.50 E R 23

lightings in building block including repair

where necessary (Parts measured

separately. Rate is based on no. of fault

found in circuit and/or no. of faulty light

fittings)

R 024 NA Checking, cleaning and tightening the 1st No. 2.30 E R 24

5 nos. of loose neutral connector or line

tap/line connector including replacement

of defective screws (within same block)

R 025 NA Checking, cleaning and tightening the No. 1.40 E R 25

remaining nos. of loose neutral connector

or line tap/line connector in item 024

including replacement of defective screws

(within same block)

R 026 NA Dismantling and re-fixing illuminated No. 8.50 E R 26

Block No./Carpark Signages of

for the purpose of carrying out

repair/replacement of defective fluorescent

tubes, starters, ballasts etc inclusive of

metal stagings not exceeding 6m height

(parts and fittings measured separately)


SOR Page 123


R 027 NA Modifying existing fluorescent light No. 5.50 E R 27

fitting for installation of electronic

ballast or low-loss ballast including

necessary wiring (Ballast


R 028 NA Modifying existing post top lantern for No. 5.50 E R 42

installation of 60 or 65W self ballasted


including necessary wiring

R 029 NA Taking down, removing and refixing No. 10.10 E R 28

ceiling fans and regulators in

new position not exceeding 200m distance

(new fan point to be measured separately)

R 030 NA Taking down, removing and refixing No. 15.50 E R 29

ceiling fans and regulators

in new position exceeding 200m distance

including transport (new fan point to be


R 031 NA Taking down wall fan in hawker No. 11.35 E R 30

centre or other parts of any building

clean, oil, service & refix fan to

original position after work completion

R 032 NA Checking firmness of ceiling No. 13.10 E R 31

fan bracket/hook, taking down ceiling fans

in hawker centres or other buildings as

directed, dismantle the mechanical

connecting components to check for

worn bolt/rivets, corroded hanging rod

and bolt assembly without split cotter pins

and replacing these parts if necessary,

including cleaning fans and refixing on

completion (parts and stagings exceeding

6m height measured separately)

R 033 NA DELETED E R 32







SOR Page 124


R 039 NA Repairing fallen or loose lightning Job 24.25 E R 38

conductor and reset it to its original

position including the use of securing

material, additional clips, etc. excluding

testing (1 job refers to whole block/linkway/

gateway/pavilion/link building etc)

R 040 NA Repositioning existing light fittings Point 28.00 E R 39

and lighting point with new 3 x 2.5mm2

PVC sheathed cable in new PVC trunking

including removal of exising wiring

and reinstatement (trunking run not

exceeding 10m)

R 041 NA Carrying out full discharge test on No. 5.20 E R 40

battery pack of exit/emergency light

including cleaning of exit/emergency

light's diffuser and submission of

condition report in approved format

(Rate is based on no. of exit or

emergency light)

R 042 NA Checking out full discharge test on battery No. 2.30 E R 41

pack of loose double poles MCB/Isolator

with rating 6 - 63 Amp

S. MISCELLANEOUS

S 001 NA Motor lorry (pick-up) not more than Hr 18.30 E S 1

2.5 tonne size including fuel and driver

S 002 NA Motor lorry 3 tonne size including fuel Hr 25.60 E S 2

and driver

S 003 NA Lorry driven crane type aerial platform Hr 28.80 E S 3

up to 12m reach including fuel,

operator and driver

S 004 NA Scissor lifting platform up to 12m reach Day 294.00 E S 4

including transportation to and from

site fuel, operator and driver

SCAFFOLDING

S 005 NA Erect double layer timber scaffolding m2 10.00 E S 5

compliance with safety regulations

including taking down after use

(height of scaffolding N.e. 15m high

A minimum of 5m width shall be paid)

(Measured from the base for which

scaffolding rests)

S 006 NA Erect metal scaffolding compliance with m2 21.00 E S 6

safety regulations not exceeding 15m

height including taking down after use


scaffolding rests)

S 007 NA Erect metal scaffolding compliance m2 23.00 E S 7

with safety regulations exceeding 15m

height but not exceeding 35m height

including taking down after use


scaffolding rests)


SOR Page 125


MOBILE STAGING

S 008 NA Mobile stage compliance with safety Job 115.00 E S 8

regulations and taking down after use

(per job duration)

S 009 NA DELETED E S 9

S 010 NA Add to item S008 for labour for in Job 57.50 E S 10

dismantling, shifting to new location,

re-erection and taking down after use

S 011 NA DELETED E S 11

MISCELLEANEOUS

S 012 NA Supply and fix stainless steel screw No. 3.70 E S 12

(cyclindrical head) with washer to electro-

galvanised steel tap-off box cover

including labour for drilling holes, forming

screw tread and opening defective camlock

S 013 NA Provide 300-450mm high concrete No. 40.60 E S 13

pedestal base for weatherproof/outdoor

control box complete with mounting

screws and brackets

S 014 NA Approved powered drive masonry No. 0.50 E S 14

pin including the use of cartridges

S 015 NA Patch up openings for pipes/conduits No. 4.60 E S 15

exceeding 100mm dia but not exceeding

225mm dia. with waterproof cement and

sand (1:3) mortar to wall and floor not

exceeding 225mm thick and make good to

match existing

S 016 NA Hack through existing rc slab not Opening 7.50 E S 16

exceeding 225mm thick to form opening

not exceeding 0.03m2 for trunking and

reinstate to match existing

S 017 NA GS bracket for metal trunking fixed to No. 3.50 E S 17

ceiling or wall including ramset nails

and 2 coats of painting

S 018 NA Polarised 10 Amp rated plug and socket No. 4.60 E S 18

connector

S 019 NA 6V A.C. relay (MY2 or MY4) for aircraft No. 40.75 E S 19

warning lights consol box

S 020 NA "Exocutor" electric insect killer No. 402.50 E S 23

Model : EX16W


Model : EX30W


Model : EX40W


Model : EX80W

S 024 NA 16W ultra violet tube for Exocutor electric No. 36.80 E S 27

insect killer, model EX16W








SOR Page 126


T. EXCAVATION AND TRENCHING

EXCAVATION

(Reinstatement of turf to be paid

separately unless otherwise stated)

T 001 NA Manual excavation of 300mm wide x m 5.00 E T 1

750mm deep trench for underground cable

including sand bed and backfilling

T 002 NA Mechanical excavation of 300mm wide m 7.60 E T 2

x 750mm deep trench for underground

cable including sand bed and backfilling


trench for underground cable not exceeding

750mm deep including sand bed and

backfilling


trench for underground cable exceeding

750mm deep but not exceeding 1.0m

deep including sand bed and backfilling

T 005 NA Excavate pit 1 m x 1 m x 750 mm deep No 24.90 E T 5

and backfilling and reinstatement of turf

DEMOLITION

T 006 NA Breaking up macadam road surface m 15.70 E T 6

600mm wide and not exceeding 450mm

thick for laying underground cable

including taking up pitch block base and

reinstate same on completion

T 007 NA Breaking up reinforced concrete slab mr 26.70 E T 7

min 300mm wide and not exceeding 150mm

thick for laying underground cable and

provide new reinforcement lapping to

reinstate concrete slab to match existing

on completion

T 008 NA Breaking up reinforced concrete drain m 82.90 E T 8

(exceeding 300mm deep) and reinstate

on completion to match existing

COVER PLATE

T 009 NA 1000 or 2000 x 150 x 2 mm thick UPVC m 3.70 E T 9

cable cover plates as warning or protective

cover in trench


SOR Page 127


TURFING

T 010 NA Supply and turf good quality 25mm thick m2 2.90 E T 10

cow grass in close turfing including 125mm

thick top soil and well watering and

tendering to ensure growth of turf

U. DAYWORK

U 001 NA Labourer for miscellaneous work Hr 6.00 E U 1

U 002 NA Electrician Hr 12.50 E U 2

U 003 NA Primary Injection test for 1 No. ACB/MCCB No. 550.00 E U 3

(with earth fault/overcurrent protection) by

EMA registered testing engineer including

providing temporary electrical supply and

skilled electrician, equipment and

transportation cost - during office hours i.e.

8.00 am to 5.30 pm

U 004 NA Secondary Injection test for 1 No. ACB/MCCB No. 450.00 E U 11

(with earth fault/overcurrent protection) by

EMA registered testing engineer

providing temporary electrical supply and

skilled electrician, equipment and

transportation cost - during office hours i.e.

8.00 am to 5.30 pm

U 005 NA Primary Injection test for each additional No. 400.00 E U 4

circuit breaker (with earth fault/

overcurrent protection) within the same

switchroom as item 003

U 006 NA Secondary Injection test for each additional No. 350.00 E U 12

circuit breaker (with earth fault/

overcurrent protection) within the same

switchroom as item 004

U 007 NA Primary Injection test for 1 No. ACB/MCCB No. 700.00 E U 5

(with earth fault/overcurrent protection)

by EMA registered testing engineer

including submission of shutdown form to

Powergrid Ltd, arrangement for

shutdown etc for testing and providing

temporary electrical supply and skilled

electricians, equipment and transportation

cost - after office hours or on Saturday,

Sunday and Public Holiday

U 008 NA Secondary Injection test for 1 No. ACB/MCCB No. 600.00 E U 13

(with earth fault/overcurrent protection)

by EMA registered testing engineer

providing temporary electrical supply

and skilled electricians, equipment

and transportation cost - after office

hours or on Saturday, Sunday and

Public Holiday

U 009 NA Primary Injection test for each additional No. 550.00 E U 6

circuit breaker (with earth fault/overcurrent

protection) within the same switchroom

as item 007

U 010 NA Secondary Injection test for each additional No. 500.00 E U 14

circuit breaker (with earth fault/overcurrent

protection) within the same switchroom

as item 008

U 011 NA Application and endorsement of Form Job 142.50 E U 7

CS/5 as licensed electrical worker when

requested by Superintending Officer for

SP Services Ltd testing for electrical

extension/minor rewiring work for the

electrical installation

U 012 NA Supply of EMA Licensed Cable Jointer to Job 142.50 E U 8

carry out "Live" termination of CTS cables

at OG box


SOR Page 128


U 013 NA Services rendered by licensed cable Hr 86.25 E U 9

detection worker for site excavation

including preparation of cable

detection report (purchase of drawings

shall be paid separately) (A minimum

of 3 hours shall be paid per job per site)

U 014 NA Application & submission to the Job 138.00 E U 10

relevant authority for approval

to commence earthworks for

excavation around high tension cable

* Diamond Coring work to RC wall, column,

beams, slab, brickwalls, etc *(015 020)

U 015 NA 50mm - 110mm dia, 75mm - 175mm depth No 33.00 E U 15




U 019 NA 175mm - 210mm dia, 75mm- 175mm depth No 86.00 E U 19

U 020 NA 175mm - 210mm dia, 176mm- 275mm depth No 135.00 E U 20

U 021 NA Mobilisation for coring works Per 300.00 E U 21

Job

REMOVAL OF EXISTING LUMINAIRE

U 022 NA Remove existing luminaire from ceiling or No. 5.00

column or wall including reinstatement

and disposal off site (new luminaire to

be measured separately)


SOR Page 129


V. OTHERS

V 001 NA Supply & Install screw plug to existing No. 1.80 E V 2

lightning conductor tape

V 002 60W self ballasted high power compact No. 54.00 E V 7

fluorescent lamp (coolwhite/daylight)

(megamen clusterlite, Dluces Infinla)

V 003 GP-8770 posttop lantern c/w aluminium No. 550.00 E V 9

die case base, vandal/impact resistance

(20Kg/m2) uv stabilized PC diffuser

with 3 line optic lense high output

low glare c/w self ballasted 60 or 65W


V 004 NA Supply and fix warning notice at No. 12.00 E V 10

distribution board, switchboard or

tap-off box which use old and new cable

colour coding

V 005 NA Supply and fix cable label on cable or wire No. 0.20 E V 11

for colour coding

V 006 NA Dimmer motion sensor UTS 36 11/36w No. 35.00 E V 12

PIR (Ultimate Saver or other approved)

V 007 NA DELETED E V 13







V 014 Ceramic metal halide lamp 35/70w with E27 No. 55.00 E V 20

base (Osram HCI PAR 20, Philips

CDM-R-PAR 20)

V 015 NA Ignitor for 35/70w ceramic metal halide No. 16.60 E V 21

lamp (Philips, Atco)

V 016 NA Magnetic ballast for 35/70w ceramic metal No. 43.00 E V 22

halide lamp (Philips, Atco)

V 017 3 ways branching connector (KAM or other No. 60.20 E V 23

approved)


SOR Page 130


* Din Rail mount connector c/w terminal

cover (S-Team, Syntech) *(018 026)

V 018 20A 3P No. 3.50 E V 24

V 019 20A 2P No. 3.45 E V 25

V 020 30A 3P No. 4.00 E V 26

V 021 50A 3P No. 4.40 E V 27

V 022 60A 1P No. 3.70 E V 28

V 023 90A 1P No. 4.30 E V 29

V 024 130A 1P No. 5.70 E V 30

V 025 240A 1P No. 7.40 E V 31

V 026 370A 1P No. 20.00 E V 32

V 027 NA Replace base for electrical meter box No. 100.00 E V 34

including dismantling, install back all

the existing component to the new base

* Non-Dimmable Electronic Ballast

Multi-wattage (14W to 35W)

(Philips EBP, Osram QTPT5,

Vossloh-Schwabe) *(028 031)

V 028 NA 1-way No. 25.30 E V 35

V 029 NA 2-way No. 32.20 E V 36

V 030 NA 3-way No. 41.40 E V 37

V 031 NA 4-way No. 50.60 E V 38


V 033 NA DELETED No. 60.00 E V 40

V 034 NA DELETED No. 690.00 E V 41

V 035 NA CDM-T G12/E27 35/70W lamp No. 42.80 E V 42

(Philips Master, Osram, GE, Sylvania)


V 037 Simlite CPD230 Spike Light mounted No. 336.00 E V 44

adjustable spotlight in die-cast aluminium


stainless steel screws with durable silicon

rubber gasket and clear toughened glass,

with Philips CDM-R 35W/830 PAR 20 30D

lamp with remote gear in weatherproof

junction box

V 038 Philips CDM-R35W/830 PAR 20 30D lamp No. 138.00 E V 45

(c/w weatherproof junction box)

V 039 Ceramic metal halide discharge lamp No. 88.00 E V 46

35 - 150W with G12/E27/RX7S base

(Osram HCI, Philips CDM or other approved)


SOR Page 131


NEW LED LUMINAIRES

W 001 NA Supply and install 2ft LED Luminaire No. 65.00

(whole fitting) in compliance with IP54

including electronic control gear, plug &

socket connectors and related

accessories and wirings

W 002 NA Supply and install 2ft LED Module No. 45.00

(without the base mounting to ceiling)

in compliance with IP54

W 003 NA Supply and install 2ft base mounting to No. 20.00

ceiling only (without LED module)

W 004 NA Supply and install approved electronic No. 18.00

control gear including wirings

W 005 NA Supply and install approved plug and socket No. 2.50

connector including wirings

W 006 NA Supply and install approved motion sensor No. 20.00

W 007 NA Supply and install approved LED downlight No. 80.00

(whole fitting) including all accessories

and wirings

W 008 NA Light 10 LED Block Signage 12w c/w No. 740.00

AC/DC driver power supply and mounting

frame

W 009 NA Light 10 LED Block Signages 12w only No. 690.00

(without AC/DC driver power supply and

mounting frame)

W 010 NA Light 10 15w AC/DC driver power supply No. 54.50

W 011 NA Light 10 Dual Level Light 12w c/w driver No. 287.50

power supply and motion sensor

W 012 NA Light 10 Dual Level Light LED 12w set only No. 100.50

W 013 NA PROLED Tubular LED 16w lamp No. 83.20

(Goldwell or other approved)

W 014 NA 16w AC/DC driver power supply No. 43.00

(Goldwell or other approved)

W 015 NA LED driver (1W to 10W) No. 40.00

(Philips, Osram, GE, Vossloh-Schwabe,

Sylvania)

W 016 NA Philip Master 7W LED GU10 Lamp No. 60.00

W 017 NA LEDUS S8 45W LED Roadway Light No. 690.00

W 018 Simlite Torch Bollard SYDJ-7602 in sand No. 316.00

blasted cast aluminium body and optic

element, anti corrosion polyester

aluminium grey paint, black radial lamellar

aluminium anti-glare system, thermally

shaped polycarbonate screen with E27

1.6W cascade style LED lamp


Date post:	18-Apr-2015
Category:	Documents
Upload:	kokuei
View:	669 times
Download:	3 times

ElecWorks SORs

Documents